Upload
vukhanh
View
222
Download
2
Embed Size (px)
Citation preview
355
Annexes of the Handbook
Andrés Díaz Lantada
A.I Summary of Especially Relevant References Linked to the Contents Covered in the Present Handbook
1. Altshuller, G.: The Innovation Algorithm: TRIZ, Systematic Innovation and Technical Creativity. Worcester, MA (1999)
2. Ashby, M.F.: Materials Selection in Mechanical Design. Butterworth- Heinemann, 3rd edn. (2005)
3. Ashby, M.F., Jones, D.R.H.: Engineering Materials 1. Butterworth Heineman, 2nd edn. (1996)
4. Ashby, M.F., Jones, D.R.H.: Engineering Materials 2. Butterworth Heineman, 2nd edn. (1998)
5. Bar-Cohen, Y.: Electroactive Polymer (EAP) Actuators as Artifi cial Muscles: Reality, Potential and Challenges. SPIE Press, 2nd edn. Washington (2004)
6. Benyus, J.M.: Biomimicry. Innovation Inspired by Nature. Harper Collins Publishers (2002)
7. Brinker, C.J., Scherer, G.W.: Sol–Gel Science: The Physics and Chemistry of Sol–Gel Processing. Academic Press, 1st edn. (1990)
8. Bunshah, R.F.: Handbook of Deposition Technologies for Films and Coatings: Science, Technology and Applications. 2nd edn. Noyes Publications, Materials science and process technology series. Park Ridge, NJ (1994)
9. Capolino, F.: Metamaterials Handbook. Vol. I: Theory and Phenomena of Metamaterials. Taylor and Francis (2009)
10. Capolino, F.: Metamaterials Handbook. Vol. II: Applications of Metamaterials. Taylor and Francis (2009)
11. Davis, J.R.: Handbook of Materials for Medical Devices. ASM International. United States (2003)
12. Díaz Lantada, A.: Handbook on Active Materials for Medical Devices: Advances and Applications. PAN Stanford Publishing (2012)
A.D. Lantada (ed.), Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices, DOI 10.1007/978-1-4614-6789-2,© Springer Science+Business Media, LLC 2013
356
13. Díaz Lantada, A., Lafont Morgado, P.: Rapid prototyping for biomedical engineering: current capabilities and challenges. Annu. Rev. Biomed. Eng. 14 , (2012)
14. Drexler, E.: Engineers of Creation: The Coming Era of Nanotechnology. Anchor Books, 1986, Oxford University Press (1990)
15. Drexler, E.: Molecular Machinery and Manufacture with Applications to Computation. Ph.D Thesis, MIT (1991)
16. Feynman, R.P.: There’s plenty of room at the bottom (data storage)”. J. Microelectromech. Syst. 1 (1), 60–66, reprint of the talk, doi: 10.1109/84.128057 (1992)
17. Feynman, R.P.: Infi nitesimal machinery. J. Microelectromech Syst. 2 (1), 4–14, doi: 10.1109/84.232589 (1993)
18. Gad-el-Hak.: The MEMS Handbook. CRC Press. New York (2003) 19. Kucklick, T.R.: The Medical Device R&D Handbook. CRC Press (2006) 20. Lorenzo Yustos, H.: Aplicación de nuevas tecnologías en la realización de
herramientas para moldes de inyección de termoplásticos. Ph.D Thesis (Advisor: P. Lafont Morgado), Universidad Politécnica de Madrid (2008)
21. Madou, M.J.: Fundamentals of Microfabrication: The Science of Miniaturization. CRC Press, 2nd edn. (2002)
22. Maluf, N.: An Introduction to Micro-electromechanical Systems Engineering. Artech House (2000)
23. Mandelbrot, B.: The Fractal Geometry of Nature. W. H. Freeman, San Francisco (1982)
24. Mironov, V., Trusk, T., Kasyanov, V., Little, S., Swaja, R., Markwald, R.: Biofabrication: A 21st century manufacturing paradigm. Biofabrication 1 (2), 022001 (2009)
25. Pahl, G., Beitz, W.: Engineering Design: A Systematic Approach, 2nd edn. Springer Verlag, London (1996)
26. Roozenburg, N., Eeckels, J.: Product Design: Fundamentals and Methods. John Wiley & Sons, New York (1995)
27. Saaksvuori, A., Immonen, A.: Product Lifecycle Management, 3rd edn. Springer Verlag, Berlin/Heidelberg/London/New York (2008)
28. Schwarz, M.: New Materials Processes, and Methods Technology, 1st edn. CRC Press, Taylor & Francis Group (2005)
29. Stark, J.: Product Lifecycle Management: 21st Century Paradigm for Product Realisation. Springer Verlag, Berlin/Heidelberg/New York (2004)
30. Ulrich, K., Eppinger, S.: Product Design and Development. 4th Edition. Mc-Graw Hill/Irwin, New York (2007)
31. Varadan, V.K., Xiaonin Jiang, Varadan, V.V.: Microstereolithography and Other Fabrication Techniques for 3D MEMS. Wiley (2001)
32. Wohlers, T.: Wohlers’ Report: Additive Manufacturing State of the Industry. Wohlers Associates (2010)
Annexes of the Handbook
357
A.II Summary of Especially Relevant Websites
On Computer-Aided Design and Engineering Resources
More linked to design tasks: • http://usa.autodesk.com • http://usa.autodesk.com/3ds-max • http://usa.autodesk.com/autodesk-inventor • http://usa.autodesk.com/product-design-suite • http://www.3ds.com/es/products/catia • http://www.plm.automation.siemens.com/en_us/products/nx/nx8 • http://www.plm.automation.siemens.com/en_us/products/velocity/solidedge • http://www.rhino3d.com • http://www.solidworks.com
More linked to calculation tasks: • http://www.3ds.com/products/simulia/portfolio/abaqus/overview • http://www.ansys.com • http://www.comsol.com • http://www.mscsoftware.com/products/cae-tools/msc-nastran.aspx • http://www.mscsoftware.com/products/cae-tools/patran.aspx • http://www.mathworks.com
On Medical Imaging and Design Based on Medical Images • http://biomedical.materialise.com/mimics • http://biomedical.materialise.com/mis • http://www.amira.com • http://www.mathworks.com (Users community for open access software) • http://www.skyscan.be
On Additive Manufacturing (Rapid Prototyping) Resources • http://reprap.org/wiki/RepRap • http://www.3dsystems.com • http://www.additive3d.com • http://www.bitsfrombytes.com • http://www.digilabglobal.com • http://www.digilabglobal.com/celljet • http://www.dimensionprinting.com • http://www.envisiontec.de • http://www.fabathome.org • http://www.makerbot.com • http://www.nanoscribe.de • http://www.stratasys.com • http://www.zcorp.com/en/home.aspx
Annexes of the Handbook
358
On Micro- and Nano-manufacturing • http://e.drexler.com • http://www.ceramed.pt • http://www.efds.org • http://www.intelligentmp.com • http://www.nanoscribe.de • http://www.oxfordlasers.com • http://www.svc.org
On Systems for Characterization Trials and Biological Models • http://biomedical.materialise.com/anatomical-models • http://biomedical.materialise.com/heartprint • http://biomedical.materialise.com/other-anatomical-models • http://simbionix.com • http://worldwide.bose.com • http://worldwide.bose.com/electroforce/en/web/home/page.html • http://www.3bscientifi c.es • http://www.cae.com/en/healthcare/home.asp • http://www.simulab.com
Annexes of the Handbook
359
A.III Summary of Main Standards and Associations
Main Organizations • International Organization for Standarization “ISO” (www.iso.org) • The World Medical Association (www.wma.net)
“New Approach” Directives Related to the Medical Industry • Directive 93/42/EEC related to “Medical devices” • Directive 90/385/EEC related to “Active implantable medical devices” • Directive 98/79/EC related to “Medical devices for “in vitro” diagnosis”
Standards Related to the Development of Medical Devices • ISO 10993 standard on “Biological evaluation of medical devices” • ISO 13485 standard on “Sanitary products. Quality management and regulatory
affairs” • ISO 13488 standard on “Quality systems. Medical devices, sanitary products and
especial requirements for applying ISO 9002 standard” • ISO 14971 standard on “Application of risk management to medical devices and
sanitary products” • ISO 15223 standard on “Symbols used for labelling and information provided
together with medical devices”
Standards and Associations Related to Medical Imaging • DICOM standard – Digital Imaging and Communications in Medicine: Strategic
Document (http://medical.nema.org) • Medical Imaging and Technology Alliance (www.medicalimaging.org) • NEMA – The Association of Electrical and Medical Imaging Equipment
Manufacturers (www.nema.org)
Additional Documents of Interest • Council of Europe “Convention for the Protection of Human Rights and Dignity
of the Human Being with Regard to the Application of Biology and Medicine: Convention on Human Rights and Biomedicine” (1994)
• UNESCO “Universal Declaration on the Human Genome and Human Rights” (1997) and “Guidelines for Implementation” (1999)
• World Medical Association “Declaration of Helsinki. Ethical principles for med-ical research involving human subjects” (current revised edition 2008)
Annexes of the Handbook
360
A.IV Relevant Scientifi c Journals Linked to Medical Devices and Related Topics of Interest
Listed below there are several high-quality scientifi c journals, linked to the different topics covered within the handbook, where researchers can fi nd additional informa-tion on biodevices and medical devices, as well as on recent advances on Materials Science and Technology for further promoting such advances:• “Acta Biomaterialia”, Elsevier • “Annals of Biomedical Engineering”, Springer • “Annual Review of Biomedical Engineering”, Annual Reviews • “Annual Review of Materials Research”, Annual Reviews • “Biochip Journal”, Springer • “Biofabrication”, IOP Publishing • “Bioinspiration & Biomimetics”, IOP Publishing • “Biomaterials”, Elsevier. • “Biomechanics and Modeling in Mechanobiology”, Springer • “Biomedical Engineering”, Springer • “Biomedical Engineering Letters”, Springer • “Biomedical Engineering Systems and Technologies”, Springer • “Biomedical Microdevices”, Springer • “Cardiovascular Engineering and Technology”, Springer • “Cellular and Molecular Bioengineering”, Springer • “Computer Methods in Biomechanics and Biomedical Engineering”, Taylor &
Francis • “IEEE Transactions on Biomedical Engineering”, IEEE • “International Journal of Biomedical Engineering and Technology”, Inderscience • “International Journal of Mechanics and Materials in Design”, Springer • “Journal of Applied Physics”, American Institute of Physics • “Journal of Biomedical Engineering”, Elsevier • “Journal of Biomimetics, Biomaterials and Tissue Engineering”, Scientifi c.net • “Journal of Materials Science: Materials in Medicine”, Springer • “Journal of Microelectromechanical Systems”, IEEE ASME • “Journal of Nano Research”, Scientifi c.net • “Journal of Physics D: Applied Physics”, IOP Science • “Journal of Tissue Engineering and Regenerative Medicine”, Wiley & Sons • “Materials & Design”, Elsevier • “Nature Materials”, Nature Publishing Group • “Nature Nanotechnology”, Nature Publishing Group • “Plasma Processes and Polymers”, Wiley & Sons • “Rapid Prototyping Journal”, Emerald • “Science Translational Medicine”, Science AAAS
Annexes of the Handbook
361
• “Science Signalling”, Science AAAS • “Sensors”, MDPI Publishing • “Sensors and Actuators A: Physical”, Elsevier • “Sensors and Actuators B: Chemical”, Elsevier • “Smart Materials and Structures”, IOP Publishing • “The Open Biomedical Engineering Journal”, Bentham Open • “Tissue Engineering: Parts A, B & C”, Mary Ann Liebert Inc.
Annexes of the Handbook
362
A.V Relevant Enterprises Linked to Medical Devices
Listed below there are several websites of multinationals and highly relevant com-panies linked to the development of medical devices, as a help for researchers need-ing information on conventional commercially available biodevices for their own development projects:• http://biomet3i.es • http://global.smith-nephew.com/master/6600.htm • http://integralife.com • http://www.3dbiotek.com/web • http://www.admedes.com • http://www.bbraun.de • http://www.biotronik.de • http://www.bostonscientifi c.com/home.bsci • http://www.clevemed.com • http://www.edwards.com • http://www.gehealthcare.com • http://www.gpc-medical.com • http://www.healthcare.philips.com • http://www.hitec-implants.com • http://www.insphero.com • http://www.jnj.com/connect • http://www.medical.siemens.com • http://www.medtronic.com • http://www.sfm.de • http://www.sjm.com • http://www.smiths-medical.com • http://www.sorin.com • http://www.spacelabshealthcare.com • http://www.stryker.com • http://www.valtronic.ch • http://www.zimmer.com • http://www.zyvex.com
Annexes of the Handbook
363
A.VI Some Matlab Programs for Helping Designers
Program for Designing Fractional Brownian Fractal Surfaces %Fractal surface (based on fractional Brownian fractal model)
clear all close all for ibis = 1:0.1:31 for jbis = 1:0.1:31 i=ibis*10; j=jbis*10; X(i)=ibis; Y(j)=jbis; sum = 0; lambda = 1.5; alfa = 0.8; % Fractal dimension is given by 3-alfa for n = 1:1:100 sum = sum + (random('norm',0,1))*(lambda^(− alfa*n))*sin((lambda^n)*(i*cos(2*pi*rand(1))+ + j*sin(2*pi*rand(1))+2*pi*rand(1)))/100; end Z(i,j)=sum; end end surface = surf(X,Y,Z)
Program for Fractal Surfaces Based on the Mandelbrot- Weierstrass Model % Mandelbrot-Weierstrass fractal surface
clear all, close all, clc; x=[0:0.1:10]; y=[0:0.1:10]; A=5; B=5; D=[0:0.5:2]; gamma=[1:1:4];
Annexes of the Handbook
364
z=zeros(length(x),length(y),length(gamma),length(D)); for jj=1:length(D) for ii=1:length(gamma) for i=1:length(x) for j=1:length(y) for n=1:50 z ( i , j , i i , j j ) = z ( i , j , i i , j j ) + A ^ ( D ( j j ) -
1)*cos(2*pi*gamma(ii)^n*x(i))/(gamma(ii)^((2- D(jj))*n))+B^(D(jj)- 1)*sin(2*pi*gamma(ii)^n*y(j))/(gamma(ii)^((2- D(jj))*n)); end end end end end fi gure; a=1; for i=1:length(D) for j=1:length(gamma) subplot(length(D),length(gamma),a) mesh(x,y,z(:,:,j,i));title(['D =', num2str(D(i),'%10.1f'),' Gamma =', num2str(gamma(j),'%10.1f')]); xlabel('x');
ylabel('y'); zlabel('surface'); a=a+1; end end
Program for Designing Fractal Spheres %Fractal spheres
clear all close all i = 0; j = 0; [X,Y,Z]=sphere(50); Xbis = X; Ybis = Y; Zbis = Z; l1=0; l2=0; for numespx=0:1:2 for numespy=0:1:2 for i = 1:1:51 for j=1:1:51
Annexes of the Handbook
365
radius = 1; lambda = 1.5; alfa = 0.1; sum = 0; for n = 1:1:5 sum = sum + (random('norm',0,1))*(lambda^(− alfa*n))*sin((lambda^n)+2*pi*rand(1))/5; end r=radius+sum; Xbis(i,j) = Xbis(i,j)*sqrt((r^2)/(Xbis(i,j)^2+ Ybis(i,j)^2+ Zbis(i,j)^2)); Ybis(i,j) = Ybis(i,j)*sqrt((r^2)/(Xbis(i,j)^2+ Ybis(i,j)^2+ Zbis(i,j)^2)); Zbis(i,j) = Zbis(i,j)*sqrt((r^2)/(Xbis(i,j)^2+ Ybis(i,j)^2+ Zbis(i,j)^2)); Xbis2(i,j) = Xbis(i,j)*40+l1*110; Ybis2(i,j) = Ybis(i,j)*40+l2*110; Zbis2(i,j) = Zbis(i,j)*40; end end surf(Xbis2, Ybis2, Zbis2) hold on l2=l2+1; end l2=0; l1=l1+1; end % surf(Xbis,Ybis,Zbis) surf(Xbis2, Ybis2, Zbis2) hold on
Program for Designing Fractal Circumferences (and Cylinders and Cones) %Fractal circumference
clear all close all i = 0; j = 0; k = 1; FI = 0; RO = 10; Z = 0; k = k+1; for fi = 0:3.1415/320:2*3.1415 j=j+1; radius = 10;
Annexes of the Handbook
366
lambda = 1.5; alfa = 0.2; sum = 0; for n = 1:1:20 sum = sum + (random('norm',0,1))*(lambda^(− alfa*n))*sin((lambda^n)+2*pi*rand(1))/10; end r = radius + sum; FI = [FI; fi ]; RO = [RO;r]; [Xint,Yint] = pol2cart(FI,RO); end plot(Xint,Yint)
Program for Designing Fractal Biomimetic Surfaces (Lotus Flower) %Fractal biomimetic surface
clc clear all close all i=0; j=0; for ibis = 1:0.1:30 i=i+1; j=0; for jbis = 1:0.1:30 j=j+1; X(i)=ibis; Y(j)=jbis; sum = 0; lambda = 1.5; alfa = 0.4; for n = 1:1:4 sum = sum + (random('norm',0,1))*(lambda^(− alfa*n))*sin((lambda^n)*(i*cos(2*pi*rand(1)) +j*sin(2*pi*rand(1))+2*pi*rand(1)))/10; end Z(i,j)=sum+10*abs(sin(pi*ibis/10)*sin(pi*jbis/10)); end end surface = surf(X,Y,Z)
Annexes of the Handbook
367
Program for Designing Microsystems with Fractal Channels %Fractal channels
clc clear all close all %Working in microns %Square 1 mm x 1 mm i=0; j=0; for ibis = 1:25:151 i=i+1; j=0; for jbis = 1:25:4001; j=j+1; X(i)=ibis; Y(j)=jbis; sum = 0; lambda = 1.5; alfa = 0.9; for n = 1:1:3 sum = sum + (random('norm',0,1))*50*(lambda^(− alfa*n))*sin((lambda^n)*(i*cos(2*pi*rand(1)) + j*sin(2*pi*rand(1))+2*pi*rand(1))); end Z(i,j)=sum; end end for ibis = 152:25:302 i=i+1; j=0; for jbis = 1:25:4001; j=j+1; X(i)=ibis; Y(j)=jbis; Z(i,j)=100; end end for ibis = 303:25:453 i=i+1; j=0; for jbis = 1:25:4001; j=j+1; X(i)=ibis; Y(j)=jbis; sum = 0;
Annexes of the Handbook
368
lambda = 1.5; alfa = 0.5; for n = 1:1:3 sum = sum + (random('norm',0,1))*50*(lambda^(− alfa*n))*sin((lambda^n)*(i*cos(2*pi*rand(1)) + j*sin(2*pi*rand(1))+2*pi*rand(1))); end Z(i,j)=sum; end end for ibis = 454:25:604 i=i+1; j=0; for jbis = 1:25:4001; j=j+1; X(i)=ibis; Y(j)=jbis; Z(i,j)=100; end end for ibis = 605:25:755 i=i+1; j=0; for jbis = 1:25:4001; j=j+1; X(i)=ibis; Y(j)=jbis; sum = 0; lambda = 1.5; alfa = 0.1; for n = 1:1:3 sum = sum + (random('norm',0,1))*50*(lambda^(− alfa*n))*sin((lambda^n)*(i*cos(2*pi*rand(1)) + j*sin(2*pi*rand(1))+2*pi*rand(1))); end Z(i,j)=sum; end end for ibis = 756:25:906 i=i+1; j=0; for jbis = 1:25:4001; j=j+1; X(i)=ibis; Y(j)=jbis;
Annexes of the Handbook
369
Z(i,j)=100; end end for ibis = 907:25:1057 i=i+1; j=0; for jbis = 1:25:4001; j=j+1; X(i)=ibis; Y(j)=jbis; Z(i,j)=0; end end
surface = surf(Y,X,Z)
Annexes of the Handbook
371A.D. Lantada (ed.), Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices, DOI 10.1007/978-1-4614-6789-2,© Springer Science+Business Media, LLC 2013
A Additive manufacturing technologies ,
183, 185 biodevices with fractal features , 194–200 for biomedical fi eld applications
active/intelligent materials , 187 implantable devices , 186 orthotic devices and technical helps ,
186–187 pathology diagnosis, biomodels
for , 186 surgical training/planning tasks,
biomodels for , 186 tissue engineering , 187
CAD design and prototypes, of microsystems , 195–197
cell motility studies , 195–197 in vitro/in vivo trials , 187
annuloplasty ring prototype , 188 gerotor-type micropump, 188 , 189 hollow structure prototypes , 192 peristaltic micropump, 189 , 190 scaffolds for cell culture and tissue
engineering , 191–194 stent prototype , 188 volumetric pump designs , 188, 189
operation principle , 182 RepRap project , 204 RP technologies , 182–183 scaffolds for tissue repair , 200–203
Aerogels , 216, 254 Analytic hierarchy process (AHP) , 299 ARTHRO Mentor VR training
simulator , 286 Artifi cial materials , 122 Artifi cial prosthesis
CAE active prosthesis , 147–149 FEM-based simulations , 140 hard tissue interaction , 159–160 hip prosthesis , 142–145 knee prosthesis , 141–143 scaffold for tissue repair , 145–147 soft tissue interaction , 160–162
hip machining processes MAHO MH 600 C , 170, 173 personalized design, femoral prosthesis ,
170–171 roughing process , 170, 174 simulation , 170, 172
Autodesk Inventor , 63–64
B Baese’s process, for plastic parts reproduction ,
183, 184 Beeswax casting process , 218–220 Bioabsorbable materials , 25–26 Bioactive materials , 26 Biocompatibility
ex vivo/in vivo testing , 289 medical devices , 28–29 structured biodevice development
methodology data types , 333 description , 332 factors , 332 ISO standard 10993–1 , 333
Biodegradable materials , 25–26 Biofabrication
biomanufacturing technologies Cell Jet Cell Printer , 271–273
Index
372
Biofabrication ( cont. ) 3D-Bioplotter™ , 270–271 laser printing, of cells , 269–270 synQUAD Technology , 273
biomimesis , 265–266 biomimetic CAD fi les , 262 biomimetic device development
digitalization approach , 267–269 fractional Brownian fractal model ,
266–268 medical imaging-based reconstruction ,
267–269 multi-scale mathematical model ,
266–268 prostheses design , 266–268
bioprinter concept , 262 complex geometry scaffolds , 262 3D biomaterial reconstruction, micro-CT
technology , 264, 265 research objectives , 263
Bio-inert materials , 25 Biomimesis , 265–266 Biomimetic device development
digitalization approach , 267–269 fractional Brownian fractal model ,
266–268 medical imaging-based reconstruction ,
267–269 multi-scale mathematical model , 266–268 prostheses design , 266–268
Blanther’s process, for layered topographic maps , 183, 184
BOSE ® ElectroForce® system , 281–283 Brainstorming technique , 297, 300 Brainwriting technique , 297, 300, 301 Bruxism, diagnosis/treatment of , 317, 318
C CAD. See Computer-aided design (CAD) CAE. See Computer-aided engineering
(CAE) CAM. See Computer-aided manufacturing
(CAM) CathLabVR Simulator , 287–288 CATIA. See Computer-aided three-
dimensional interactive application (CATIA)
Cell Jet Cell Printer , 271–273 Chemical vapour deposition (CVD)
process , 253 Computer-aided design (CAD) , 10–11
application fi elds , 52 Autodesk Inventor , 63–64
biomimetic design of skin artifi cial biostructures , 81 bioreplication techniques , 86 contact phenomena effects , 86 fi ltering effects , 84–85 functions , 80 high-resolution photographic
camera , 82 mesh-to-solid programs , 82 microtopographies and
microtextures , 80 physical prototypes , 81 schematic representation , 83 self-similarity , 79 stages of process , 84
CATIA , 63 design operations , 65 3D modelling packages , 51 evolution of scientifi c documents ,
52–53 fractal geometry
acetabulum of total hip prosthesis , 113
biomimetic design , 108, 110–111 design of structures , 111–112 fractal spheres , 112 fractional Brownian fractal surfaces ,
113–114 Google SketchUp, 67 industrial design , 60 issues , 61 Matlab , 66 modules , 64–65 Siemens PLM solutions , 61–62 solid-based operations , 67–70 Solid Edge , 62–63 solids and surfaces design , 61–62 SolidWorks , 63 surface operations , 70–73
Computer-aided engineering (CAE) , 11 analysis solver , 139 artifi cial prosthesis
active prosthesis , 147–149 FEM-based simulations , 140 hard tissue interaction , 159–160 hip prosthesis , 142–145 knee prosthesis , 141–143 scaffold for tissue repair , 145–147 soft tissue interaction , 160–162
corporal geometries and tissues aneurysm , 148–151 femur , 151, 152 fl uidic behavior of arterial bifurcation ,
155–157
Index
373
thermal ablation of mitral valve tissue , 158–159
vibratory effects on eye and eardrums , 151, 153–155
evolution of scientifi c documents , 52–53 post-processing , 139 preprocessing , 138 software modules and tools
coupled thermal–fl uid simulations , 140 dynamic response calculations , 140 mechanical components , 140, 141 stress calculation modules , 139
Computer-aided innovation (CAI) tools , 52 Computer-aided manufacturing (CAM) , 11
injection-molding processes advantages , 173 disadvantages , 175 fi ll time and part quality , 176, 177 gerotor-type internal gear pump,
175 –176 Moldfl ow , 175 polymeric materials , 172–173 properties , 174–175
machining processes MAHO MH 600 C , 170, 173 personalized design, femoral
prosthesis , 170–171 roughing process , 170, 174 simulation , 170, 172
Computer-aided three-dimensional interactive application (CATIA) , 63
Corrosion ceramics , 32 metals , 31–32 polymers , 32
Crawford slip writing method , 297 Creativity promotion tools
elaboration stage analytic hierarchy process , 299 mind maps , 299 morphological box technique , 299 originality and value , 298 PERT chart , 299 radar chart , 299
innovative projects , 296 inspiration stage
bioinspiration concept , 298 brainstorming technique , 297 brainwriting technique , 297 Crawford slip writing method , 297 KJ technique , 298 Lotus blossom technique , 298 Philips 6–6 technique , 297 SCAMPER , 298
TRIZ contradiction analysis , 298 intellectual property and technological
transfer in academia , 308 in industry , 307–308
invention licensing agreements , 308 spin-off company , 309 TRIZ methodology ( see TRIZ
methodology) Customer relationship management
(CRM) , 10 CVD process. See Chemical vapour deposition
(CVD) process
D 3D-Bioplotter™ , 270–271 Derwent Innovation Index database , 349–350 Design based on surface operations
annuloplasty ring , 72–73 cardiovascular surgery , 70–71 GeoForm model , 72 vascular stent , 71
Device personalization. See Personalized medical devices
Digital age , 50 Digital imaging and communication in
medicine (DICOM) , 77 Di Matteo’s process, for 3D surface/body
construction , 183, 184 Dip coating process , 255–256 Duran model , 72
E Elasticity-related issues , 31 ElectroForce® linear motor , 281–283 Electrolytic/electrochemical deposition
process , 256 Enterprise resource planning (ERP) , 10 Ethylene oxide sterilisation , 33 Ex vivo/in vivo testing , 278
biocompatibility assessment , 289 instrumented splint with piezoelectric
sensors , 290, 291 using DLC-coated rapid prototyped
scaffold , 289, 290
F Failure mode and effects analysis (FMEA)
method , 15 Failure trees , 14–15 Fatigue-related issues , 30
Index
374
Fractal geometry applications for biodevices , 97–98 CAD model
acetabulum of total hip prosthesis , 113 biomimetic design , 108, 110–111 design of structures , 111–112 fractal spheres , 112 fractional Brownian fractal surfaces ,
113–114 defi nition , 96 dimension , 96 manufacture of
photopolymerisable resins , 116 physical prototypes , 113, 114 surface topography , 114–115
models evolutive model , 107–110 fractional Brownian models , 106–107 Mandelbrot–Weierstrass equation ,
99–105 static and dynamic , 98
process scheme of biomimetic design , 116 Fractal scaffolds , 195, 198, 199 Fractional Brownian models , 106–107
G GeoForm model , 72 Gerotor-type micropumps , 188, 189 GI-BRONCH Mentor VR training
simulator , 286
H Haptic teleoperation , 285 Hot embossing technique , 234, 235 Hydrogels , 217
I Information and communication technologies
(ICT) , 49–50 Injection-molding processes, CAM
advantages , 173 disadvantages , 175 fi ll time and part quality , 176, 177 gerotor-type internal gear pump, 175 –176 Moldfl ow , 175 polymeric materials , 172–173 properties , 174–175
In silico testing , 278 Catia v.5 , 280 description , 279 ergonomical splint features, for aided
tracheotomy , 279–280
FEM-based simulation , 279 Intellectual property
structured biodevice development methodology , 323–324
and technological transfer in academia , 308 in industry , 307–308
In vitro testing , 278 compression test of rapid prototyped
scaffold , 281, 282 dynamic loading condition , 280 ElectroForce® linear motor , 281–283 haptic teleoperation , 285 impact , 281 shape-memory polymer annuloplasty
ring , 288 Simulab Corporation
double-layered intestine biomimetic replicas , 284
heart model biomimetic replicas , 284 TraumaMan system , 285
static loading condition , 280 thermal analyses , 281 thermomechanical analyses , 281 virtual reality , 285–288
Ionic self-assembled monolayering techniques , 256–257
Ion implantation , 257–258 ISO biocompatibility matrix , 333
K Kardar–Parisi–Zhang model , 107–110 KJ technique , 298
L Langevin model , 107–110 Langmuir–Blodgett technology , 256 Laser ablation , 257 Laser micromachining technique , 229–230 Layer manufacturing technologies (LMT) , 54.
See also Additive manufacturing technologies
Lost-wax casting process , 220–221 Lotus blossom technique , 298, 301, 302
M Mandelbrot–Weierstrass equation , 99–105 Manufacturing technologies and materials
science layer-by-layer manufacturing processes , 54 rapid prototyping vs. rapid tooling , 54–55 scaffolds , 54
Index
375
Medical devices , 48 active materials , 23 ancient age , 20–21 bioabsorbable materials , 23 biocompatibility , 28–29 biomaterials , 25–27 body conditions , 26–28 corrosion and deterioration , 31–32 defi nition , 20 directive 98/79/EC , 39–41 directive 90/385/EEC , 39 directive 93/42/EEC , 37–38 human issues , 24 legal issues , 23–24 manufacturing techniques , 22 mechanical behaviour , 29–31 multidisciplinary teams , 34–35 physiological signs , 22 regulatory standards , 35 requirements , 24–25 socioeconomic factors , 22 standards , 35–36 sterilisation , 33–34 technical issues , 23 US Food and Drug Administration , 20
Medical imaging-aided design. See Personalized medical devices
Medical imaging technologies , 50–51 Metamaterials. See Porous and lattice
structures Microinjection molding process , 234 Micro-manufacturing technologies
additive complex 3D structures , 238 micro-stereolithography , 236–237 two-photon/ multiphoton lithography ,
237–238 applications , 227–228 cell scaffold prototypes , 242, 243 3D laser lithography technology
applications , 238–239 micro-/nano-fl uidic channels , 241, 242 polymeric micro-stents , 240, 241 ultrahigh-aspect-ratio microneedle ,
239, 240 EUMINAfab , 244 high-precision rapid manufacturing
process , 238, 239 lab-on-a-chip solutions , 229, 231, 238 life-on-a-chip/body-on-a-chip, 229 –231 microporous structures , 235–236 micro-replication , 233–235 photolithography , 230–233 schematic illustration , 226, 227
subtractive micromachining technologies , 228–230
Microporous structures, for prostheses and tissue engineering , 235–236
Micro-replication technologies , 233–235 Micro-stereolithography , 236–237 Mind maps , 299 Mitral valve insuffi ciency , 72, 317, 319 Morphological box technique , 299 Multiphoton lithography , 237 Munz’s layered photopolymerization process ,
183, 184
N Nano-manufacturing technologies
conventional implants , 249–250 CVD process , 253 ionic self-assembled monolayering
techniques , 256–257 ion implantation , 257–258 laser ablation , 257 PVD process , 250–252 solution-deposition process
dip coating , 255–256 electrolytic/electrochemical
deposition , 256 Langmuir–Blodgett technology , 256 sol–gel process , 254–255 spin coating , 255
Nanoscribe’s 3D laser lithography technology applications , 238–239 micro-/nano-fl uidic channels , 241, 242 polymeric micro-stents , 240, 241 ultrahigh-aspect-ratio microneedle ,
239, 240 Nanotechnology , 248, 249 NX , 61–62
O Oxford Lasers , 229–230
P Patent-based problem-based learning
(P 2 B 2 L) , 345 PBL. See Project-based learning (PBL) Peristaltic micropumps , 189, 190 Personalized medical devices
advantages of , 76–77 artifi cial hip prosthesis ( see Artifi cial
prosthesis) biomimetic CAD design of skin
Index
376
Personalized medical devices ( cont. ) artifi cial biostructures , 81 bioreplication techniques , 86 contact phenomena effects , 86 fi ltering effects , 84–85 functions , 80 high-resolution photographic
camera , 82 mesh-to-solid programs , 82 microtopographies and microtextures , 80 physical prototypes , 81 schematic representation , 83 self-similarity , 79 stages of process , 84
imaging tools DICOM standard , 77 MIMICS-like programs , 78–79 rapid prototyping technologies , 78 types of radiation , 77
prosthesis hard tissue , 87–89 soft tissue , 89–91
PERT chart. See Program evaluation review technique (PERT) chart
Philips 6–6 technique , 297 Photolithography, for 2D ½ biodevices ,
230–233 Physical vapour deposition (PVD) process ,
250–252 Porous and lattice structures , 122
Ashby’s diagrams , 126 Boolean operations with CAD design ,
124–125 CES Selector , 126 3D complex structures
additive manufacturing , 132 properties , 133 prototyping process , 133
FEM-based simulations , 125 geometrical confi gurations , 123–124 lattice auxetic structures and devices
annuloplasty ring , 129 Boolean CAD operations , 129–130 2D and 3D structures , 127–128 FEM simulation , 129–131 negative Poisson ratio , 126 shape-memory alloys , 128 smart actuators , 127
NetFabb , 123–124 schematic process , 123
Problem-based learning. See Project-based learning (PBL)
Product and portfolio management (PPM) , 10 Product data management (PDM) , 11
Product development basic engineering stage
approach , 9 level prototypes , 11–12 manufacturing and rapid prototyping
technologies , 11 shapes and geometries , 8 software programs , 10–11 tools , 10
conceptual design stage , 7–8 defi ning objectives and planning stage , 6–7 defi nition , 2 designers , 3 design steps , 6 detailed engineering stage , 12–13 diagram for product design , 13 factors , 5–6 new approach directives , 14 principles , 6 productivity , 13 quality , 14–15 safety , 13 systematic methodologies in
engineering , 4–5 types of engineer , 2
Product lifecycle management (PLM) development , 10 Siemens PLM solutions , 61–62
Program evaluation review technique (PERT) chart , 299
Project-based learning (PBL) conceptual design phases , 344, 345 in mechanical engineering fi eld , 342, 343 pre-commercial detailed design , 345 product development-related courses , 344 results
CAD–CAE tool handling , 352 patents usage , 351–352 students’ development tasks , 352–353 students’ marks evolution , 353 success rate , 352 workload, for teaching staff , 353
student motivation , 342, 343 teaching–learning tool , 342 teaching methodology, bioengineering
subject Actúa-UPM fl agship programme , 351 conceptual design examples, of medical
devices , 348, 349 customer/supplier communications , 350 Derwent Innovation Index database ,
349–350 development tasks , 345 different patent documents , 345, 346
Index
377
face-to-face classes , 347 industrial context , 347 multilingual working environment , 348 question format, for application task ,
347–348 students creativity , 350
PVD process. See Physical vapour deposition (PVD) process
Q Quality function deployment (QFD) , 14
R Radar chart , 299 Rapid form/shape copying process , 54
benefi ts , 209–210 description , 208 silicone mould manufacture , 210
after cutting/separation, of two mould cavities , 211, 212
after degasifi cation , 211 bicomponent liquid mixture , 211 cell growth and tissue engineering-
related studies , 217–219 cell motility studies , 217, 219 dimensional verifi cation , 217 one-part silicon mould making process ,
217, 218 polymerisation process , 211 prototypes from beeswax casting ,
218–220 vacuum casting , 211–214
sol–gel process agar gel fi lm , 214–215 characterisation , 214 micro-textured gel replicas , 215, 216
Rapid prototyping (RP) technologies , 182–183. See also Additive manufacturing technologies
Rapid tooling process benefi ts , 209–210 bridge tooling , 209 description , 208 soft and hard tooling , 209
RP technologies. See Rapid prototyping (RP) technologies
S Scaffold(s). See also Fractal scaffolds
for cell culture and tissue engineering , 191–194
design , 68–70 Matlab-based CAD designs, of
microtextured , 202 for tissue repair , 200–203
SCAMPER , 298 Shape-memory polymers
annuloplasty ring prototype , 188 stent prototypes , 188
Siemens PLM solutions , 61–62 Silicone mould manufacture , 210
after cutting/separation, of two mould cavities , 211, 212
after degasifi cation , 211 bicomponent liquid mixture , 211 cell growth and tissue engineering-related
studies , 217–219 cell motility studies , 217, 219 dimensional verifi cation , 217 one-part silicon mould making process ,
217, 218 polymerisation process , 211 prototypes from beeswax casting , 218–220 vacuum casting , 211–214
Simulab Corporation, in vitro testing double-layered intestine biomimetic
replicas , 284 heart model biomimetic replicas , 284 TraumaMan system , 285
Soft lithography , 233 Sol–gel process
advantages , 255 conventional stages , 254 rapid form/shape copying systems
agar gel fi lm , 214–215 characterisation , 214 micro-textured gel replicas , 215, 216
Solid Edge , 62–63 SolidWorks , 63 Solution-deposition process
dip coating , 255–256 electrolytic/electrochemical deposition , 256 Langmuir–Blodgett technology , 256 sol–gel process , 254–255 spin coating , 255
Spin coating process , 255 Sterilisation
ethylene oxide , 33 gamma ray radiation , 33–34 low temperature plasma , 34 steam , 33
Sterility assurance limit , 33 Structured biodevice development
methodology basic engineering stage
Index
378
Structured biodevice development methodology ( cont. )
CAD-CAE-CAM technologies , 328 integrating patent information , 326 in vitro tests , 329 modelling and simulation technologies ,
327–328 quality requirements , 330 rapid prototyping and manufacturing
technologies , 328–329 safety requirements , 330
biocompatibility data types , 333 description , 332 factors , 332 ISO standard 10993–1 , 333
biomaterials/intelligent material , 327 selection characteristics , 321–322 supplier availability , 322–323
conventional product, success of , 323 ex vivo/in vivo tests , 331–332 information exchange , 336–337 initial document frameworks , 315–317 intellectual property protection , 323–324 international collaborations , 336 issues , 334–335 multidisciplinary teams
benefi ts , 314–315 limitations , 315
objectives and planning stage , 320 patent utilization, benefi ts of , 323–325 teaching–learning activities , 336–337 teaching requirements , 317–320
Subtractive micromachining technologies , 228–230
Supply chain management (SCM) , 10
T Test-related issues , 30 Thin-fi lm solution-deposition process.
See Solution-deposition process TRIZ methodology
vs. brainwriting technique , 306, 307 computer-aided innovation tools , 304 inventive principles , 303–306 prostheses design and long-lasting
behavior , 304–305 schematic description , 303, 304
V Vacuum casting, for silicone mould
preparation , 211–214 Vibratory effects
eardrum , 153, 155 eye , 153, 154
Virtual reality (VR) , 285–288
W Wear-related issues , 30–31
X Xerogels , 216, 254
Index