Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
ANNUAL QAYO U N O LO N G E R H AV E TO C H O O S E
B E T W E E N Q U A L I T Y A N D E A S E O F U S E
DOSEVIEW™ 3D
B E T T E R H A R D W A R E & S O F T W A R E , B E T T E R D A T A
Robust hardware with easy-to-use software for superior beam commissioning and quality assurance measurements.
A N N U A L Q A
“The DoseView 3D is an outstanding scanning
tank. Setup is simple and easy. Hopefully you
are only using your scanning tank once a year.
DV3D has made the set up so simple that
after 12 months of not using the tank it still
feels familiar.”
B E N R O B I S O N
M E D I C A L P H Y S I C I S T
P R O V I S I O N R A D I AT I O N T H E R A P Y
Making sure your patients have great treatments begins with a fine tuned
linac, and that starts with the DoseView 3D. It isn’t just another water phantom.
The foundation for reliable data is built upon precision manufacturing.
The hardware achieves 0.1 mm accuracy in 3 axis, so fewer post-scan
corrections need to be applied.
With a firm purchase on superb hardware, the software has been designed
with speed in mind to get you set up and ready to scan within 15 minutes.
The intuitive software has been optimized for commissioning, so you can
get back to doing what you love.
DOSEVIEW™ 3D
www.standardimaging.com // +1 608 831 0025
A N N U A L Q A
STRENGTH IN SIMPLICITYManufactured with a rigid, one-piece cast
aluminum frame and stainless steel leadscrews,
the DoseView 3D provides a durable platform for
repeated QA testing. This construction ensures
consistent measurement accuracy within
±0.1 mm per axis.
THE EASIEST WAY TO LEVEL The DoseView 3D’s three leveling screws are
mounted above the phantom’s scanning volume,
making it easy to fine-tune leveling even when
the phantom is filled with water.
ONE CORD, FASTER SETUP, BETTER DATA A fast-acquisition electrometer and motion
controller are mounted on board the DoseView
3D, reducing the length of detector cables
required for testing. This lessens settling time
and opportunity for cable leakage, streamlining
setup. Only one cord is needed to power the
entire phantom.
CONVENIENT, WIRELESS PENDANTThe wireless pendant allows for easy operation.
The pendant’s audible and visual cues and
backlit display makes configuring and
controlling the DoseView 3D a straightforward
process for any user. Fine-tune positioning with
0.1 mm per-press step mode.
DURABLE, UNBELIEVABLY ACCURATE MOTORSThe DoseView 3D’s 5 stepper motors maintain
superior precision over the phantom’s
lifetime, minimizing degradation even after
30,000 repetitions.
REFERENCE DETECTOR HOLDER This modular detector holder can be used in 3
length configurations to accommodate a wide
range of field sizes. A carbon fiber support
tube prevents reference detector vibration
during scanning.S w a p d e t e c t o r s w i t h o u t r e s e t t i n g
i s o c e n t e r/o r i g i n w i t h t h e D e t e c t o r
A l i g n m e n t S y s t e m . T h e s y s t e m a l i g n s
t h e c e n t e r o f e a c h d e t e c t o r .
A U T O M AT I C
D E T E C T O R A L I G N M E N T
S Y S T E M
BETTER HARDWARER O B U S T C O N S T R U C T I O N P R O V I D E S F O U N D A T I O N F O R A C C U R A C Y , C O N S I S T E N C Y
www.standardimaging.com // +1 608 831 0025
A N N U A L Q A
HIGH-SPEED ELECTROMETERThe DoseView 3D Electrometer is a dual-channel,
fast-acquisition electrometer that continues
Standard Imaging’s renowned reputation
for precision and efficiency. Bias voltage can
be enabled independently per channel for
chamber/diode simultaneous operation. Low
noise performance helps ensure post-processing
operations are kept to a minimum.
ACCURATE, RELIABLE EXRADIN ION CHAMBERSFor over 35 years, Exradin’s quality has been
recognized by the top research institutes and
standard laboratories in the world. The DoseView
3D comes with two Exradin A28 Ion Chambers
(0.125cc), producing sustained accuracy and
confidence in your QA testing.
EXPEDITE ACCURATE SET UPThe Automatic Detector Alignment System
places the center of all detectors at the same
position relative to the water’s surface, allowing
users to swap detectors without resetting
isocenter/origins. Initial setup is performed with
the crosshair alignment jig which provides ample
surface area and fiducials to aid in matching to
the ODI and/or room lasers. This bracket system
is compatible with Exradin Ion Chambers and
supports chambers and diodes from most
other manufacturers. This system ensures faster
setup time and provides confidence in accurate
leveling and beam center positioning.
AUTOMATICALLY FIND BEAM CENTEROnce leveling is performed, the DoseView 3D
determines the center of a radiation field by
locating the field edges using an ion chamber
or diode. This test can be performed at multiple
depths to identify any issues with system leveling
and/or gantry alignment.
VARIABLE STEP SIZE ACQUISITIONThe DoseView 3D can be programmed to
move in varying step sizes throughout a scan.
Implement tighter steps toward the penumbra
to account for increased variability without
significantly increasing overall scan time.
BUILT FOR ACCURACY
TIME SAVING FEATURES
www.standardimaging.com // +1 608 831 0025
A N N U A L Q A
INCREDIBLE, ALL NEW SOFTWARE DESIGNT H E E A S I E S T , M O S T I N T U I T I V E W A T E R P H A N T O M S O F T W A R E A V A I L A B L E
• Import scans from your previous water scanning systems for comparison & continuity.
• Accuracy of system setup is confirmed with automatic checks that ensure detector centering and gantry angle positioning.
• Scan queue setup and measurement is automated eliminating repetitive tasks and saving time.
• Scan speed and step size automatically optimized according to dose rate.
• Guided beam scanning performing next sequential group of measurements in queue.
• SmartSelect detects scans outside queue parameters and automatically deselects them.
• Simple, yet powerful scan queue creation and editing.
• Easy export to TPS and CSV
QUEUESA queue creation wizard helps you choose
your scanning modality (photons, electrons or
flattening filter free photons), modifiers, energies,
field sizes and scan types. All combinations of
your choices are created. No copying and editing
individual scan groups. Make your scan queues
in a matter of minutes…or less. Continuous
scanning and multiple scan zones are available
at no extra cost.
SETUPThe Measure page has a setup wizard that takes
you through the process of getting your tank
ready to use. When all expander title bars have
results in blue, you are ready to scan.
MEASUREScan queues are loaded into a queue runner. As
scan data is acquired, it is immediately stored in
a database for future access, analysis, and export.
Raw scan data and the methods used to modify
it are stored in the database, so you always know
what your raw data looked like and always know
how you processed it for your needs.
ANALYZEComprehensive scan processing and analysis
tools include profile centering, mirroring,
symmetric averaging, shifting & normalization
of profiles & depth doses, smoothing with
boxcar & gaussian filters, and dose conversion
using TG-51 and TRS-398.
Rel
ativ
e Io
niz
atio
n (%
)
Rel
ativ
e Io
niz
atio
n (%
)
Off-Axis Distance (cm)Depth
www.standardimaging.com // +1 608 831 0025
A N N U A L Q A
FULLY INTEGRATED WITH LIFT AND RESERVOIR IN ONEThe DoseView 3D’s cart contains both an
electronic lift mechanism and 60 gallon (265 liter)
water reservoir, resulting in hassle-free storage
and setup. Additionally, a convenient storage area
holds the power supply and other accessories.
The lift and pump are powered by a single power
cable, and a power pass-through cable allows
convenient connection to the water phantom.
EXTENSIVE ADJUSTMENTS CAPABILITIESThe Precision Positioning Platform provides an
ideal medium for maneuvering the DoseView 3D.
This added flexibility allows subtle X and Y axis
movements up to ±12.5mm, phantom rotation of
±1° and positive engagement at 10°, 45°, and 90°
intervals. Achieve consistent detector orientation
during in-plane, cross plane and diagonal scans.
EFFICIENCY LIFT CARTAn alternate, portable lift cart is also available. The
electric lift table has a capacity of 900 pounds and
is capable of over 15 inches of vertical travel.
DOSEVIEW 3D SPECIFICATIONSMotion Control SystemTravel Speed — 50 mm/s // Positioning Accuracy — ± 0.1 mm per axis // Positioning Repeatability — ± 0.1 mm per axisPC Communication — Wireless or wired via RS-232 // Control Method — Onboard controls, PC or via wireless pendant
Water Phantom (acrylic tank only)Outer Dimensions — [ length × width × height ] 704 mm x 693 mm x 570 mmScanning Dimensions — [ length × width × height ] 500 mm x 500 mm x 410 mmWall Thickness — 12 mm // Replaceable Fill/Drain Port
Lift Cart and ReservoirOuter Dimensions — [ length × width ] 1247 mm x 762 mm // Vertical Range — 685 mm – 1185 mm (tank base to floor)Water Pump — Electric fill, gravity drain // Water Capacity — 60 gal (227 liters)Fill Speed — 6-7 min // Drain Speed — 16-20 min
Precision Positioning PlatformX / Y Fine Adjustment — ±12.5 mm // Fine Rotational Adjustment — ±1°Discreet Engagement — 10°, 45°, and 90° intervals
DoseView 3D ElectrometerChannels — 2 // Bias Voltage — 0, ±150 to 450 (VDC) in 50 volt increments // Range — 2 pC – 999,999 nCResolution — 10 fC // Connector Type — Triaxial BNC or TNC (BNC unless specified)
DoseView 3D Software: System RequirementsOperating System — Windows® 7 Professional (SP1), 64-bit Recommended
Windows 10 Professional, 64-bit RecommendedRuntime Environment — .NET 4.5.2 // Processor — Dual Core, 1 GHz; Quad Core, 2 GHz RecommendedMemory — 32-bit OS: 2 GB, 4 GB Recommended 64-bit OS: 4 GB, 8 GB RecommendedHard Drive — 1 GB free space for initial software installation. Typically 2.5 MB/Year/Linac disk space growth.
25% free space Recommended.Screen Resolution — 1440 x 900 or greater // CD-ROM Drive — 2X speed or greaterConnectivity — 9-pin serial RS-232 port or USB port with USB to RS-232 adapter
Microsoft® and Windows® are registered trademarks of Microsoft Corporation. Pinnacle3® is a registered trademark of Philips Electronics N.V. Eclipse™ is a trademark of Varian Medical Systems Inc. Monaco® is a registered trademark of Elekta AB.Specifications subject to change without notice.DoseView 3D REF 92260, DoseView 3D Lift and Reservoir Cart REF 72260
24/7 SUPPORT Standard Imaging’s acclaimed customer service
and support ensures an easy transition of the
DoseView 3D into your QA workflow and will
guide you through any issues that may arise in
the future. Standard Imaging also provides 24/7
phone support for DoseView 3D in USA.
For more information on warranties and
additional maintenance and support packages
please contact your Standard Imaging Account
Manager or regional distributor.
LIFT AND RESERVOIR CARTS
www.standardimaging.com // +1 608 831 0025
A N N U A L Q A
www.standardimaging.com800-261-4446 . ph 608-831-0025 . fax 608-831-2202 3120 Deming Way Middleton WI 53562-1461 USA
© 2019 Standard Imaging, Inc. 1322-26 (3.19)