“GUJARAT ENERGY TRANSMISSION CORPORATION LTD

CORPORATE OFFICE:

SARDAR PATEL VIDYUT BHAVAN, RACE COURSE,

VADODARA

COMPLETION PERIOD.

Name of Work: Approval of Estimate for construction of new Control room building, compound wall, cable trench, metal spreading etc. at 66 KV Zagadia S/s under Bharuch TR Circle.

Sr. No.

Description of work Completion Period in

Days from date of commencement

1

Completion of work.

150 Days

Chief Engineer (Projects) GETCO, H. O., Vadodara.390007

SCHEDULE-B

Name of Work: Approval of Estimate for construction of new Control room building, compound wall, cable trench, metal spreading etc. at 66 KV Zagadia S/s under Bharuch TR

Circle. SN Description Qty Rate Per Amount

1 Excavation for foundation up to 1.5 M depth including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50M lead. In dense / hard

530.00 78.00 Cmt 41340.00

2 Excavation for foundation from 1.5 M depth up to 3M including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50M lead. In Loose / soft soil

6.00 85.00 Cmt 510.00

3 Filling in foundation, plinth, yard with selected yellow soil brought from outside in layers of 20cm. Thickness including watering, ramming and consolidating etc. complete.

100.00 307.00 Cmt 30700.00

4 Carrying out plinth treatment to pre/post construction/ existing structure by spraying chemical solution for termite control treatment including labour and material consistent with ISI specification (with performance guarantee for 5 years)

220.00 63.00 Smt 13860.00

5 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sqm in cement mortar 1:6 (1 cement : 6 fine sand) for foundation and plinth. Conventional bricks.

140.00 2656.00 Cmt 371840.00

6 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sqm in cement mortar 1:6 (1 cement : 6 fine sand) for super structure above plinth up to floor two level. Conventional bricks.

290.00 2741.00 Cmt 794890.00

7 Half brick masonry in common burnt clay building having crushing strength not less than 35 Kg/cm in cement mortar 1:4 (1 cement : 4 coarse sand) in super structure and plinth. Conventional bricks.

25.00 369.00 Smt 9225.00

8 Providing and laying cement concrete 1:4:8 (1cement : 4coarse sand : 8 stone aggregates 25 to 40 mm. nominal size) and curing complete excluding cost of from work in : (a) Foundation and plinth.

75.00 2279.00 Cmt 170925.00

9 Providing and laying ordinary cement concrete M-15 for RCC structure including finishing smooth with curing etc. comp. including the cost of form work but excluding the cost of reinforcement & Providing form work of steel/ply wood planking so as to give a smooth exposed finish including centering (steel adjustable tubular supports).Shuttering strutting and propping etc.for any height of propping and centering below supporting floor to ceiling,and removal of the same for reinforced concrete and plain concrete for Foundation

45.00 4515.00 Cmt 203175.00

10 Providing and laying controlled cement concrete M-20 with curing etc. complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in [A] Footing/Pile etc.

15.00 4955.00 Cmt 74325.00

10A Providing and laying controlled cement concrete M-25 with curing etc. complete excluding the cost of form work but excluding the cost of reinforcement for R.C.C. work in [A] Footing/Pile etc.

245.00 5856.00 Cmt 1434720.00

11 Providing and laying controlled cement concrete M-20 exposed work with curing etc. complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in walls, pardietc.

20.00 5048.00 Cmt 100960.00

12 Providing and laying controlled cement concrete M-25 exposed work with curing etc. complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in slab, chhajja, etc.

50.00 5941.00 Cmt 297050.00

13 Providing and laying controlled cement concrete M-25 exposed work with curing etc. complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in beams having cross section area 0.08 to 0.12 sqmt

36.00 7636.00 Cmt 274896.00

14 Providing and laying controlled cement concrete M-25 exposed work with curing etc. complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in columns having cross section area 0.08 to 0.12 sqmt

18.00 8674.00 Cmt 156132.00

15 Providing and laying controlled cement concrete M-20 exposed work with curing etc. complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in slab, chhajja, lintal etc.

2.00 5034.00 Cmt 10068.00

15A Providing and laying exposed controlled cement concrete M-20 with curing etc. complete including the cost of form work but excluding the of reinforcement for RCC structure like beams having cross section area .08 to .12 sq mt

88.00 6728.00 Cmt 592064.00

16 Providing and laying exposed controlled cement concrete M-20 with curing etc. complete including the cost of form work but excluding the of reinforcement for RCC structure like columns having cross section area .08 to .12 sq mt

32.00 7773.00 Cmt 248736.00

17 Providing Thermo Mechanically Treated bars [TMT bars] confirmed to IS 1786 FE 415 for RCC work including bending, binding and placing in position etc. completed for G.F.+F.F+ Stair cabin

42.00 48000.00 MT 2016000.00

18 Providing 15 mm thick cement plaster single coat on masonary / concrete walls/ceiling for interior plastering up to floor two level finished even and smooth in cement mortar 1:3[1 cement : 3 sand], with a floating coat of neat cement slurry.

2200.00 143.00 Smt 314600.00

19 Providing 20 mm thick sand face cement plaster on walls up to height 10 meters above ground level consisting of 12 mm thick backing coat of CM 1:3 [1cement : 3 sand] and 8 mm thick finishing coat of CM 1:1[1cement : 1sand] etc.complete

1780.00 202.00 Smt 359560.00

20 Providing cement vata [10cmx10cm size quarter round in cement mortar 1:1 including neat cement finishing watering etc. comp.

120.00 21.00 Rmt 2520.00

21 Providing white washing with lime on wall surfaces /ceilings[THREEcoats] to give and even shade including thoroughly brushing the surface to remove all dirt, dust mortar drops and other foreign matter.

190.00 6.00 Smt 1140.00

22 Providing distempering [Two coats] with oil bound distemper of approved brand and manufacture and or required shade on undecorated wall /ceilingsurface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth

800.00 48.00 Smt 38400.00

23 Providing & applying 3 coats of ACID / ALKALI resisting paint of approved shade & make to wall, ceiling including filling putty smoothing the surfaces scaffolding etc. complete as directed by E.I.C.

55.00 81.00 Smt 4455.00

24 Providing & applying 2 coats of APOCOLITE APEX or its euqi.ACRYLIC EXTERIOR paint on exiting plastered surface or approved make & shade including finishing & thinning as per manufacture’s instruction A gap of 6 hrs.should be given between 2 subsequent coats.The work should be carried out strictly as per manufacture’s specification and requirement comp.As directed by EIC

2950.00 63.00 Smt 185850.00

25 Providing and fixing rolling shutters of approved make made of 80 mm wide MS Laths interlocked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates guide channels and arrangements for inside and out side locking with push pull operation complete including the cost of hood cover and spring.

10.00 3410.00 Smt 34100.00

26 Providing & fixing FRP door having FRP frame of size 100 x 50 mm & 28 mm thick FRP shutter with Depressed Panel shutter having extra reinforcement on side and edges and in Gel coat finish.The core of the shutter is to be filled up with injected fibre extinguishing grade polyurethane foam done in situ along with embedded wooden pieces for stiffening and also for fixing hinges and fixtures.The whole FRP frame and shutter is to be water proof, weather proof, termite proof and resistance to mild acid/Alkali resistance including SS hinges with necessary screws and aluminum fixture and fastenings etc complete.

6.00 3545.00 Smt 21270.00

27 Providing and fixing partly/fully glazed double leaf anodised allm entrance door using extruded section fabricated by std. manufacturer with frame of 101.50x44.50mm rect. sec. having th. 2.1 mm & weighing approx 1.60 kg/rmt & door shutter of 114.30 x 44.45 mmx1.55mm weighing approx. 1.36kg/RMT for top & bottom section and 47.62 x 44.45 mm x1.55mm weighing approx. 0.88kg/RMTfor vert. style & 150 x 44.45 mm for lock rail having th 2.2mm & weighing 2.36 approx.kg/rmt and floor spring door closure of approved make and using 5mm th approved quality HB4 plain glass with glazing deep rubber gasket, necessary hardware, handle cum locking arrangement and using allm sheet on both side with plywood in bet. for pannel incl S.S. hinges( 3 nos.on each shutter) and all fixtures/ fastening of anodised section with all labours & materials etc. complete as per drawing & manufacturer's specification. Complete unit shall be fabricated from aluminium section confirming to HE9WB designated to IS 1285/1980 for its chemical and mechanical properties.Anodization shall be confirmng to IS1868/1968.

8.00 3105.00 Smt 24840.00

28 Providing and fixing aluminium ventilator having frame size 55x35mm having thickness 3mm & weighing 1.36kg/rmt approx standard aluminium extruded anodized frame having panel of 5mm thick white/brown glass fixed horizontal louvers in alluminium channel as per details drawings.

3.00 3105.00 Smt 9315.00

29 Providing & fixing aluminium anodised sliding windows having standard section using extruded section fabricated by standard manufacturers with 20 Microns silver colour anodising as per drawing (Main frame 61.85 x 31.75 x 1.5/0.784kg/mt.& Shuter 40x18x1.55/0.547kg/mt) windows shall be of 4 mm thick. Triveni ,Saint Gobbin 'HB4' plain glass glazing rubber gasket and necessary hardware, handles cum locking arrangement etc. Complete unit shall be fabricated from aluminium section conforming to HE9WB designated to IS 1285/1980 for its chemical and mechanical properties. Anodized shall be conforming to IS 1868/1968. All joints shall be mechanically joint having secured with specially design MS. Zink plated heat arrangement. No welding process shall be allowed in the unit.

24.00 3105.00 Smt 74520.00

30 P & F MS cover for cable trench in CR made from 14 gauge MS sheet having MS angle frame all round of 40x40x5mm size & cover shutter frame of angle 30x30x5mm size & 2 supports at middle incl oil painting of 3 coats of approved shade & make & one coat of primer with providing 2 handles of 6mm dia MS bar as per instruction etc. comp as directed by EIC.

8.00 1466.00 Smt 11728.00

31 Steel work welded in built up sections, framed work including cutting,hoisting,fixing in position and applying a priming coat of red lead paint (A) In Beams & Joists,Channels,Angles,Tees,Flate with connecting plates of angle cleats as in main & cross beams hips & jack rafter,purlins connected to common rafters and the like

0.50 53410.00 MT 26705.00

32 Providing & laying water proofing treatment on terrace including applying neat cement slurry 2.75 kg./sq.mt. on cement admixed with water proofing component after cleaning the surface, Laying cement concrete with brick bat 75mm to 100mm thick with 50% of C.M. 1:5 admixed with water proofing component over 20mm thick layer of C.M. 1:5 to required slope including ramming at junction of wall and slab, after two days of proper curing applying a second coat of cement slurry, finished the surface with 20mm thick C.M. 1:4 china mosaic flooring and finally finishing flooding 75mm deep with water on terrace for a period of two week. The contractor shall submit performance guarantee of the waterproofing item at the rate of 20% of cost of item of work order in the form of FDR of Schedule Bank / Nationalised Bank in favour of GETCO (A/c Agency) for a period of 5 years from actual date of completion of work stamp paper of appropriate value in approved format of GETCO.

185.00 384.00 Smt 71040.00

33 Providing and laying approved quality polished Kotah stone slab(25mm th.) flooring including using 35x25mm approved quality machine cut, marble strip over 20mm (average) thick base of cement mortar 1:6 (1 cement : 6 course sand )or L.M. 1:1.5 laid over and jointed with grey cement slurry including rubbing and mirror polishing using polishing machine with grinding six emery's of different no. including using special chemical powder for polishing including white cement coating two times during polishing for filling up minute holes or cracks in joints etc. comp

245.00 680.00 Smt 166600.00

34 Providing and laying white/coloured glazed tiles 6mm thick in flooring treads of steps and landing laid on bed of 12mm thick cement mortar 1:3 [cement :3 coarse sand finished with flush pointing in white cement

80.00 753.00 Smt 60240.00

35 Providing & laying ceramic tiles 8MM THICK in flooring treads of steps and landing laid on 12mm thick cement mortar1:6 [ 1 cement : 6 coarse sand] and finished whith white or colour cement complete as directed by EIC

55.00 706.00 Smt 38830.00

36 Providing and fixing to wall, ceiling and floor galvanized mild steel tubes (Medium grade) of the following nominal bore, tube, fittings and clamps including making good the wall, ceiling and floor.(A) 15mm dia tube.

10.00 161.00 Rmt 1610.00

37 Do for 25mm dia tube. 70.00 276.00 Rmt 19320.00 38 Providing fixing gun metal check or

non-return wheel valve 25 mm dia 2.00 605.00 No 1210.00

39 Providing and fixing screw down bib tapes of following size Brass screw down bib tap polished bright. [A] 15 mm dia

5.00 207.00 No 1035.00

40 Providing & Fixing readymade PVC. water tight storage tank made from linear low density polyethylene & low density polyethylene LDPF product confirming to IS:10146-1982 with cover including providing & fixing ne 20 mm dia, float valve ball-cock, one 20 mm.dia GI over flow pipe of length upto 0.30Mt. Including making all connection for inlet/outlet etc.complete as directed EIC.1000 Liters Capacity.

1.00 4600.00 No 4600.00

41 Providing & Fixing FINOLEX brand or equivalent rigid PVC. Pipe for rain water including necessary fittings like bends shoe, cowl etc.& fixing the pipes to the wall in plumb by means of GI.Clamps of 18 gauge sheet with 1 to1.5 meter distance,filling the joints with approved solution complete as directed by EIC.110mm dia O.D PVC pipe

40.00 144.00 Rmt 5760.00

42 Providing and fixing cast iron (Spun) Nahani trap of the following nominal diameter of self cleaning design with C. I. screwed down or high grating including cost of cutting and making good the walls and floors 100mm inlet and 50mm outlet.

4.00 416.00 No 1664.00

43 Providing & fixing 150X100mm stone ware gully Trap with 225X150mm B.B. Masonry in C.M. (1:6) clear chamber including B.B.C.C. (1:4:8) 150 mm thick bed concrete, plaster in the chamber with 150X225 mm CI. Cover with frame curing etc.complete as directed by EIC.

4.00 1151.00 No 4604.00

44 Constructing masonary for under ground C.I. Inspection chamber and bends with bricks having crushing strength not less then 35mkg//cm 2 in Cm 1:5 C.I. cover with frame [light duty] 500mm x700 mm internal dimension total weight of cover with frame to be not less then 38 Kg[wt. Of cover 23 Kg and wt of frame 15 Kg] RCC top slab with 1:2:4 mix [1 cement: 2 coarse sand:4 grade stone aggregate 20mm size] foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth a floating coat of neat cement on walls and bed concrete etc. complete Inside dimension 500mmx700mm and 1.50m deep

5.00 3326.00 No 16630.00

45 Providing and fixing approved Coloured wash basin with single hole pillar tap with tap with C.I. or M.S. brackets painted while/colour including cutting holes and making good the hole including pillar tap,chromium plated bottle trap,stop cock, fisher union, Brass waste pipe etc complet. 550 x 440 mm

2.00 995.00 No 1990.00

46 Providing & Fixing light type CI Manhole covers with water tight CI Frame & fixing the same in concrete etc.complete as directed by EIC(a) 600x600 mm size

3.00 951.00 No 2853.00

47 Providing and fixing approved quality &Coloured ORISSA PAN water closet squatting pan size 580mm including providing and fixing 100mm size P or S trap jointing tap with the pan and soil waste pipe and with G.I. inlet connection for flush pipe with W.C. pan and chromium plated brass half turn flush cock of approved quality

2.00 909.00 No 1818.00

of 25mm dia etc. complete.

48 Providing 2500mm internal diameters & 4.00 Mt deep soak pit including excavation in all types of soil & soft rock & B.B.C.C. (1:4:8) bedding 300mm thick below masonry and 450mm thick brick masonry in C.M. (1:6) up to 600mm height 350mm thick for further 600mm & 230mm thick for remaining height honey combed, plastering in C.M.(1:3) outside up to 1.5mt height and 100mm thick RCC slab with 600x600mm CI having cover with frame, with necessary reinforcement as per design & CI vent pipe 1800mm long with brick masonry pillar 3500x350x450 plastered all around filling 40 to 50mm brick bats up to 1.5Mt depth including 16mm dia MS"U" stages steps refilling including disposal of the surplus excavated earth up to the lead of 300Mt radius including 3 coats of white or colour wash to all exposed finished surface etc. completed as directed.

1.00 25215.00 No 25215.00

49 Providing and fixing urinal of approved quality &Colouredincluding connection with trap and with integral longitudinal flush pipe.Squating plate pattern white earthenware 550 mm x 300 mm

1.00 1073.00 No 1073.00

50 Providing & laying `A' Class R.C.C. hume pipe including necessary excavation, refilling the trenches, laying 150mm.thick B.B.C.C.(1:4:8) below joints up to half the height of joints making water tight joints in C.M.(1:1) curing etc., complete as directed by E.I.C.) 150mm.dia. Pipe

20.00 178.00 Rmt. 3560.00

51 do- 300mm 85.00 477.00 Rmt 40545.00

52 Providing & fixing 600 mm x 450 mm Bevelled edge mirror of superior glass mounted on 6 mm Thick AC. sheet or plywood sheet and fixed to wooden plugs with CP. Brass screws and washers

2.00 640.00 No 1280.00

53 Providing and fixing a set of 6 No of stainless steel coat racks of approved quality fixed on 20 mm thick Teak wood batten at 150 mm c/c including 3 coats of oil painting etc complete (450 mm long)

2.00 46.00 No 92.00

54 Providing & Fixing 300X300 mm. size marble year plate with black border all-round & letters including fixing the same in cement mortar etc., complete as directed by E.I.C.

1.00 184.00 No 184.00

55 Providing and fixing CP Brass towel rail complete with CP brass brackets fixed to wooden plugs with cp brass screws. 600x20 mm size

2.00 516.00 No 1032.00

56 Providing and fixing Acrylic name plates of require size including painting letters as directed and fixing as directed by EIC.

8.00 55.00 No 440.00

57 Providing and fixing casat iron spigot and socket soil waste pipe including bend ,y, and vent pipe etc for following nominal size. (a) 75 mm dia pipe

20.00 877.00 Rmt 17540.00

58 -- do -- but 100 mm dia pipe 10.00 1055.00 Rmt 10550.00 59 Providing and fixing 20mm dia. MS

bar steps 150mm wide and 300 long clear including grouting in wall, three coats of oil painting etc. complete as directed by EIC.

10.00 69.00 No 690.00

60 Providing & Fixing flush cock of 25mm dia of approved make etc. comp.

2.00 371.00 No 742.00

61 Providing & Fixing 60mm th coloured paver block as approved by EIC on the bedding of stone dust to required gradient etc. comp.

60.00 340.00 Smt 20400.00

62 Boring holes 7.50 M. deep in ordinary soil/Densr or hard soil (for cast in situ piles) and disposal of the surplus excavated soil as directed within a lead of 50 M. for following diameter of piles.500 mm Dia.

41.00 1500.00 No 61500.00

62A Boring holes 7.50 M. deep in ordinary soil/Densr or hard soil (for cast in situ piles) and disposal of the surplus excavated soil as directed within a lead of 50 M. for following diameter of piles.300 mm Dia.

175.00 969.00 No 169575.00

63 Extra for under reaming inside the bore holes for under reamed piles of 500mm diameter

83.00 267.00 No 22161.00

63A Extra for under reaming inside the bore holes for under reamed piles of 300mm diameter

350.00 163.00 No 57050.00

64 Supplying of graded stone aggregate of following sizes (for WMB road)(1) stone 40 to 60 mm size including conveyance and box filling

27.00 639.00 Cmt 17253.00

64A Supplying & stacking 25 to 40mm size crushed metal including transportation, filing the box etc. complete as directed by EIC. (Box measurement will be paid with 15% voids deductions)- For yard metal spreading.

225.00 669.00 Cmt 150525.00

65 Supplying & Stacking 6 mm size grit including transportation and spreading on road filling the box etc.complete.

7.00 609.00 Cmt 4263.00

66 Supplying of murrum / binding material. Including transportation , filling measure boxes and spreading etc complete.

12.00 345.00 Cmt 4140.00

67 Labour charges for spreading25 to 40 mm. size metal in layers etc., complete as directed by E.I.C

270.00 12.00 Smt 3240.00

67A Labour charges for spreading 40 to 60 mm. size metal in 100 mm thick layers with required grade & camber & watering rolling the each layer with 8 to 10 tones power roller etc., complete as directed by E.I.C

2250.00 3.00 Smt 6750.00

68 DO as above but for Murrum Spreading

135.00 5.00 Smt 675.00

69 DO as above but for grit 135.00 5.00 Smt 675.00

70 Providing & laying 100mm th. Precast concrete block of size 600x450mm for kerbing of road including necessary excavation, fixing blocks in line and level and filling joints with CC(1:1), curing etc. comp. as directed by EIC.

60.00 403.00 Each 24180.00

71 Labour charges for removing the chainlink fencing panel with nuts & bolts from angle supports including stacking the same as directed by E.I.C.

150.00 15.00 Each 2250.00

72 Removing the existing fencing post P.S.C. or angle iron from concrete without damaging the post & stacking etc. complete including dressing the ground as directed by E.I.C.

160.00 12.00 Each 1920.00

73 Demolition of brick work and stone masonry including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift (ii) In cement mortar

25.00 174.00 Cmt 4350.00

74 Dismantling the C.C. or R.C.C work for foundation and building work and throwing / Stacking the dismantled stuff as directed within the lead of 500 Mt. radius, dressing etc. complete as directed by E.I.C.

60.00 332.00 Cmt 19920.00

75 Providing supplying fabricating and erecting chain link fencing panel of size 2400x2000mm made from 75x75mm & 10 gauge GI chain link & 50x50x6mm angle including fixing and chain link in angle frame by means of 40x3 mm MS flat welded to angle frame. Drilling of holes in angle frame and flat, fixing the same with angle post in line, level and plumb by means of 10 mm dia bolts and nuts in frame and flat with hot deep galvanizing as per IS-2633/72 & 209 of 1966 or latest amendment, etc complete as per drawing as directed by EIC. (All this materials like MS flat, chain link fencing, MS angles, bolts, nuts will have to be supplied by the contractor) Note: for add size payment will be made on SMT basis.

1.45 68000.00 MT 98600.00

76 Providing and laying best quality of FINOLEX or equivalent brand rigid PVC of 4Kg/Scm plumbing pipe in RCC column of the Gate, with necessary fittings like lbaw etc. complete as dircted by EIC.

10.00 98.00 Rmt 980.00

77 Providing & fixing sliding gate of 40 mm dia mild steel pipe B class all round and 20 mm dia Mild steel pipe at 200 mm C/C and 12mm Mild steel square bars at 200 mm C/C alternatively (i.e.One between two pipes) vertically welded to 40 mm dia pipe frame as per drawing and design with necessary brackets,hold fasts,locking arrangement on top & aldrop on both the side including base rail for sliding the gate having ball bearing rollers & guide tracks of 50x6mm M.S. flat with hold fast, fabrication of side supports including fixing GETCO letter on front side etc.comp.With three coats of approved oil painting & one coat of red oxide primer as directed by EIC (The cost does not include the cost of reinforcement, column, support,joints, concrete masonry work.

28.00 1104.00 Smt 30912.00

78 Providing COOKING PLATFORM 3000 X 675 mm.size with approved quality of stainless steel sink of size 450 mm dia.& 4 Nos.of partition walls (middle) with cement plaster in C.M. (1:3) to all exposed faces,75 mm thick RCC Slab in CC (1:2:4) at top with necessary reinforcement making holes in slab for gas connection,including kotah stone flooring with side Patti of required size & thickness,with polishing etc.complete & fixing teak wood cupboard of frame size 75 X 50 mm with shutter for opening of size 1.20 X 0.60 Mtrs.made from 12 mm thick Nova pan/ECO Board exterior laminated with all round teak batten Patti including two coats of oil paints & one coat of primer including PVC waste pipe,Nahni trap,bibcock,etc. complete as per drawing & instruction of EIC.

1.00 5434.00 No 5434.00

79 Providing & Fixing 12 mm.dia. M.S. fan hooks embedded in slab or beam during casting as per instructions including 3 coats of oil painting etc., complete as directed by E.I.C.

14.00 17.00 No 238.00

80 P & L 300mm wide Glass Copping over top of the Compound Wall in C.M (1:2) in half round shape including providing & fixing of Broken glasses on top as directed. The item includes cost of all labour, materials, scaffolding, curing etc. complete.

475.00 50.00 Rmt 23750.00

81 Providing & Fixing SIGN BOARD having size 1000X750 mm. for SUB-STATION made from 16 gauge M.S. Sheet having frame work of 35X35X3 mm. M.S. angle all-round & 2 vertical intermediate angle supports at equal distance welded to sheet with 2 Nos. of 50X50X6 mm. M.S. angle posts 3.0 M. long with arrangement of bolting, 3 coats of oil painting etc.,

1.00 1587.00 No 1587.00

82 "DO" as above but of Board size of 2000 x 1000 mm with 4 Nos. of intermediate vertical supports and 3 Nos. of 50 x 50 x 6 mm angle posts.)

1.00 2875.00 No 2875.00

83 Providing and laying best quality of FINOLEX or equivalent brand rigid PVC of 4Kg/Scm plumbing pipe with necessary fittings like lbaw etc. complete as dircted by EIC. 50mm dia

75.00 98.00 Rmt 7350.00

84 Painting the letter with best enamel oil paint in 200 to 250mm size etc. complete as directed by EIC (paint should be brought by the contractor)

200.00 20.00 No 4000.00

85 Labour charge for employing 3-D type JCB earth mover machine for cleaning the site of wild growth plants with tools etc. complete as directed by EIC.Rate inclusive of hiring charges of machine operator diesal and transportation at site etc

20.00 750.00 SMt 15000.00

86 Dismantling the barbed wire fencing pinned with R.C.C./P.S.C./Angle or wooden posts from all rows & diagonals & bundling & stacking the barbed wires as directed by E.I.C. etc. complete. (PAYMENT WILL BE MADE IN RMT. OF COMPLETE FENCING WORK IRRESPECTIVE OF NO OF ROWS.)

210.00 16.10 Rmt 3381.00

87 Filling in plinth with sand under floors including watring ramming consolidating and dressing etc complete.

155.00 377.00 Cmt 58435.00

(A) Total Rs 9159919.00

Cost of Control Room Wiring

1 Erection & fixing of point wiring with PVC insulated 1.5 Sqmm stranded copper conductor wire of approved make & strickly as per IS-694, in recessed / surface steel conduit (having min 1.5 mm thickness) of approved brand with ISI make with clamps sadles etc.

55 805.00 Point 44275.00

2 Same as item (1) above, but for plug complete erected with shock proof anchor brand 3 pin plug socket & Switch of 5A capacity for earth continuity PVC insulated 1.5 Sqmm single core copper conductor wire as per IS - 694, shall be laid continuously up to main switch.

(a) : Separate Plug Point 7 250.00 Nos 1750.00

(b) : Looped on same switch Board. 8 500.00 Nos 4000.00

3 -do- but with providing and fixing electric bell. The switch should be mounted as shown in drawing. All materials must be ISI marked,Anchor,Jainex or GEC make.

1 150.00 No 150.00

4 -do- but for plug in separate board complete with shock proof anchor brand 3 pin plug socket and switch of 15 Amp capacity for earth continuty and having LED for ON indicationn, with PVC insulated 2.5 sqmm single core coper conductor wire as IS 694 , shall be laid continuously up to main Earthing.wall plug provided with 15 Amp. Switch and both the wire should run separately from main Board for power plug point. All material must be ISI marked.Anchor, Jainex or GEC make.

5 1200.00 No 6000.00

5 Providing and fixing of outdoor type 1 x 60 W, water proof, water tighting buck head fitting on fire proof ( steel) board including 100 watts 250 volts lamps

6 300.00 Nos. 1800.00

6 Providing and fixing single phase heavy duty exhaust fan of 225mm, 1400 rpm of standard GEC/ crompton make only with necessary wall finishing work and applying bird proof net outside wall as per EIC.

4 1980.00 No 7920.00

7 Providing & fixing of 1400 size, 1 x 80W celling fan of Bajaj, Crompton, Orient, Usha (ISI approved) make with hum-free 5 step delux electronics regulator for above ceiling fans having Elley/Anchor( EME- socket type of modular series) and approved by EIC and flexible wiring by using twin core PVC to PVC 48/0.2 mm coper flexible cord suitable and approved size from ceiling rose up to fan termination and including providing Iron fan hook 12 mm dia fixing regulators etc including( Guarantee cards of fans must be submitted to construction division. including flexible wiring by using twin core PVC to PVC 48/0.2 mm copper flexible cord of suitable & approved size from ceilling rose up to fan terminal & fixture.

8 1450.00 Nos 11600.00

8 Same as item (1) above, but for DC supply light & using accessories suitable for 110V DC including 110V DC 100W Lamp.

4 950.00 Point 3800.00

9 Same as item (2)above, but DC plug point with 2 pin plug socket & switch for DC Ckt test as per instruction of Engineer in charge. Note: for DC wiring separate conduit will be laid with separate switch board, in no case DC system sholud be laid with AC system.

2 450.00 Point 900.00

10 Providing & fixing of SMC type 2'X2' box with two nos front door, concealed glass on right door with polished fire proof board inside for distribution Ckt with shockproof handles. Dist Ckt includes 1 no of ELCB (3 Ph), 3 phase MCB 63A, 3 nos of DP 32A, MCB.

1 4500.00 No 4500.00

11 Providing Pipe type earthing with “B” class G.I. pipe having size 150 cms. long and 25mm diameter with coupling & B/Ns. It is to be buried in specially prepared earthing pit using salt, charcoal, coke complete with

3 500.00 No 1500.00

necessary G.I. 10 SWG earth wire as per instruction of EIC.

12 Laying sub main line connection from AC Panel Board using 3x2.5 sqmm PVC to PVC coper conductor wire ISI brand only in recessed/surface steel conduit/ having min 1.5 mm thickness of approved brand with Isi clamps etc as per drawing of instruction of EIC

200 50.00 Rmtr 10000.00

13 Providing & fixing indoor lighting luminaire suitable for porch 1 x 100W ceiling mounted fancy fittings with ISI mark only, including flexible wiring by using twin core PVC 48/0.2 mm copper flexible cord from ceiling rose to fitting Make Bajaj/ Philips/ Osram/ GE/CGL

2 500.00 No 1000.00

14 Providing and fixing of separate telephone outlet /socket with board as per instruction of EIC.

2 25.00 Nos. 50.00

15 Providing & fixing of telephone wire of 2 pairs with separate 1.5mm thick 20dia HD polythene pipe as per instruction of EIC.

60 15.00 Mtr. 900.00

16 Providing and fixing of 4X24W ceiling mounted Indoor decorate fluorescent luminaries with electronics ballast of crompton make type T5CQ12424 EB or euivalent model of BAJAJ/PHILIPS/GE/OSHRAM make only & required accessories, , with flexible wiring using twin core PVC, 48/0.2 mm copper flexible cord from ceilling rose to fixture with suitable size as per instruction of EIC. This also includes fixing of vertical conduit pipe ( 2 nos ) of required length with provision of ball sockets and check nut arrangement.For earth continuity PVC insulated 12SWG stranded copper conductor wire as per IS 694 shall be laid continuously up to main earthing terminal as per instruction of EIC & approved drawing No : GETCO/E/06-STD/S-015 Gurantee card of Electronic ballast ( One year or as provided by supplier) should be hand over to concern EIC

13 2600.00 No 33800.00

17 Providing and fixing of 1 X 28 W ceiling mounted Indoor decorate

12 750.00 No 9000.00

fluorescent luminaries suitable for used with energy sufficient of following specification with electronic ballast of crompton make type T5GP28 EB or equivalent model of BAJAJ/PHILIPS/GE/OSHRAM make only & required accessories with flexible wiring using twin core PVC, 48/0.2 mm copper flexible cord from ceilling rose to fixture with suitable size as per instruction of EIC. This also includes fixing of vertical conduit pipe ( 2 nos ) of required length with provision of ball sockets and check nut arrangement. For earth continuity PVC insulated 12SWG stranded copper conductor wire as per IS 694 shall be laid continuously up to main earthing terminal as per instruction of EIC & approved drawing No : GETCO/E/06-STD/S-015 Gurantee card of Electronic ballast ( One year or as provided by supplier) should be hand over to conseren EIC

18 Providing and fixing of Distribution Board with 2 No front door with adequate size, with polished fire prrofe board inside fro distribution ckt with shock proof handle , distri ckt includes following.All entire box should be aesthetic and having locking and earthing arrangement and shall be fitted as per EIC and approved drawing No. GETCO/E/6S-STD/S-015. Only energy meter will be provided by GETCO free of cost.

1 4500.00 Job 4500.00

a 63Amp, TPN, Miniature circuit breaker - 1 Nos.

b 10Amp, SP,Miniature circuit breaker - 13 Nos.

c 20Amp, SP,Miniature circuit breaker - 6 Nos.

19 Switch Box for D.C. Light control as per ISI standard make. (15 Amp.)

1 500.00 No 500.00

20 Providing & laying of CAT 2 wire of ISI mark in MS conduit pipe 9 Black) of 20 mm dia. & 1.6 mm wall thickness for e - Urja as per direction of engineer in charge with fixing of main board.

50 115.00 Mtr. 5750.00

21 Providing, lying Fixing and termination of cable for DAS wiring for 11KV and 66 KV Panel including PVC conduit and accessories for wall fitting of three core flexible wire in ISI mark, MS conduit pipe ( Black) of 20 mm dia. & 1.6 mm wall thickness for DAS system metering as per directive of engineer in charge with fitting of main board. Note. Necessary cable will be provided by GETCO.

50 70.00 Mtr. 3500.00

22 Providing and fixing 5Amp capacity, 1 Way Switch. Make-Anchor

9 100.00 No. 900.00

(B) TOTAL 158095.00

Total (A+B) 93,18,014.00

Note: Service tax shall be reimbursed on production of proof of such payments

made by the contractor to the appropriate department.

CHIEF ENGINEER (Projects) GETCO: HO: BARODA.

I/We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put by GETCO on WEB site. I/We hereby accept all the conditions and specifications of this tender document, and accordingly, I/We am/are willing to carry out the work at _________________% (in words ______________percentage) above/below the estimated cost. Accordingly the total amount of my/our tender works out to Rs.____________________ (Rupees__________________ ___________________) SIGNATURE OF CONTRACTOR. (With rubber stamp/seal of the company)