2
High High- - end black end black - - box receiver box receiver SR2200 SR2200 www.aorja.com  All specifications are subject t o change without prior notice. SR2200 TECHNICAL SPECIFICATIONS SR2200 TECHNICA L SPECIFICAT IONS 25 25 MHz MHz  3 GHz 3 GHz Discriminator OUT Discriminator OUT 10.7 10.7 MHz I.F. OUT MHz I.F. OUT Frequency stability + Frequency stability + - - 1 1 ppm  ppm High sensitivity & selectivity High sensitivity & selectivity PC control by USB or serial port PC control by USB or serial port 1st IF 255.3MHz 744.3MHz 2nd I F 10. 7MHz 3rd IF 455kHz Tuning steps Sel ecti v i ty NFM: +/-10kHz 60dB  AM/SFM: +/-6kHz 60dB WFM +/-180KHz 60dB Spurious Sensitivity  Adjacent Selectivity Dynamic Range Unwanted Spurious emission I P3 Frequency stability  Audio outpu t Power requirements  Aerial connection IF output Control interface Operation temperature Dimensions Weight Nominal filter bandwidths Memory channels Search banks Scan/Search Rate Pass frequencies Priority chan ne ls 1 40 25 steps per second. 60dB> 55dB > 6kHz, 15kHz, 300kHz. RS-232C / USB , 38400bps 0 to 50 degrees Celsius IF frequencies 2000 50 Ohm BNC ±1ppm(050) 100 Hz to 100 kHz (10 Hz incremental) 1.23kg 90dB> < -57dBm +1.0 dBm 1.2W (8 Ohm) max.@ 10% distortion (no intern al s peaker!) 200(W) x 31(H) x 230(D) mm 1000 (10 banks) 12 - 16V DC, 0.5 A with 1W audio outpu t 10.7MHz Configuration Frequency Reception modes Sensitivi t y Band Sensi ti vity I P3 (dBm) S/N (dB) IP3 NFM: 0.35uV(12dB SINAD) S/N AM: 0.6u V (10dB S/N) WFM: 2.0uV (12dB SINAD) NFM: 0.35V(12dB SINAD)  AM: 0.uV (10dB S/N) WFM: 2.0uV (12dB SINAD) 1.7GHz  2.7GHz NFM: 0.6uV(12dB SINAD) 1 32 2.7GHz– 3GHz NFM: 1.5uV(12dB SINAD) 1 30 25M- 225MHz 225M- 1.7GHz 1 40 1 35 Triple co nv ersion superheterodyne 25MHz - 3GHz  AM / NFM / WFM / SFM (n o SSB, CW) Supplied accessories: Supplied accessories: Operating manual & COMMAND LIST on CD USB driver on CD. DC power cable Receiver control software and AC adapter are NOT supplied. The SR2200 is a black box wide band receiver intended for commercial / government applications. The fr equ ency range is 25 MHz to 3 GHz. The receiver has no front panel, it is controlled by connection to a computer via an RS232 serial and USB rear panel sockets.

AOR Sr2200 Brochure

  • Upload
    gus289

  • View
    8

  • Download
    0

Embed Size (px)

DESCRIPTION

AOR Sr2200 Brochure

Citation preview

  • 5/26/2018 AOR Sr2200 Brochure

    1/2

    HighHigh--end blackend black--box receiverbox receiver

    SR2200SR2200

    www.aorja.com

    All specifications are subject to change without prior notice.

    SR2200 TECHNICAL SPECIFICATIONSSR2200 TECHNICAL SPECIFICATIONS

    2525 MHzMHz 3 GHz3 GHz

    Discriminator OUTDiscriminator OUT

    10.710.7 MHz I.F. OUTMHz I.F. OUT

    Frequency stability +Frequency stability +--11ppmppm

    High sensitivity & selectivityHigh sensitivity & selectivity

    PC control by USB or serial portPC control by USB or serial port

    1st IF

    255.3MHz

    744.3MHz

    2nd IF 10.7MHz

    3rd IF 455kHz

    Tuning steps

    Selectivity NFM: +/-10kHz 60dB

    AM/SFM: +/-6kHz 60dBWFM +/-180KHz 60dB

    Spurious

    Sensitivity

    Adjacent

    Selectivity

    Dynamic Range

    Unwanted

    Spurious

    emission

    IP3

    Frequency stability

    Audio output

    Power

    requirements

    Aerial connection

    IF output

    Control interface

    Operation

    temperature

    Dimensions

    Weight

    Nominal filter

    bandwidths

    Memory channels

    Search banks

    Scan/Search Rate

    Pass frequencies

    Priority channels 1

    40

    25 steps per second.

    60dB>

    55dB >

    6kHz, 15kHz, 300kHz.

    RS-232C / USB , 38400bps

    0 to 50 degrees Celsius

    IF frequencies

    2000

    50 Ohm BNC

    1ppm(050)

    100 Hz to 100 kHz (10 Hz incremental)

    1.23kg

    90dB>

    < -57dBm

    +1.0 dBm

    1.2W (8 Ohm) max.@ 10% distortion (no

    internal speaker!)

    200(W) x 31(H) x 230(D) mm

    1000 (10 banks)

    12 - 16V DC, 0.5 A with 1W audio output

    10.7MHz

    Configuration

    Frequency

    Reception modes

    Sensitivity Band Sensitivity IP3

    (dBm)

    S/N (dB)

    IP3 NFM:

    0.35uV(12dB

    SINAD)

    S/N AM: 0.6uV

    (10dB S/N)

    WFM: 2.0uV

    (12dB SINAD)

    NFM:

    0.35V(12dB

    SINAD)

    AM: 0.uV

    (10dB S/N)

    WFM: 2.0uV

    (12dB SINAD)

    1.7GHz

    2.7GHz

    NFM:

    0.6uV(12dB

    SINAD)

    1 32

    2.7GHz

    3GHz

    NFM:

    1.5uV(12dB

    SINAD)

    1 30

    25M-

    225MHz

    225M-

    1.7GHz

    1 40

    1 35

    Triple conversion superheterodyne

    25MHz - 3GHz

    AM / NFM / WFM / SFM (no SSB, CW)

    Supplied accessories:Supplied accessories:

    Operating manual & COMMAND LIST on CD

    USB driver on CD.

    DC power cable

    Receiver control software and AC adapter are NOT supplied.

    The SR2200 is a black box

    wide band receiver intended

    for commercial / government

    applications. The frequency

    range is 25 MHz to 3 GHz.

    The receiver has no front

    panel, it is controlled byconnection to a computer via

    an RS232 serial and USB

    rear panel sockets.

  • 5/26/2018 AOR Sr2200 Brochure

    2/2