Prefabricated Steel Construction System

i n nova t e . c o l l abo ra t e . ou tpe r fo rm V A L U E B E Y O N D B U I L D I N G

Advanced Engineering +Innovative Construction Management

AP Integrated Systems is a synthesis of fabricated steel structural systems, cutting-edge erection technologies, and modular components that create 6-to 20-story residential and hospitality buildings that are significantly less expensive than comparable conventional construction.

The backbone of the AP Integrated Systems is an advanced, engineered, load-bearing, lightweight, patented, and UL-rated steel structural panel. The load-bearing panels are arranged to carry conventional pan-deck concrete floor spans up to 26 feet, maximizing steel’s strength capacities without reaching its limited deflection capabilities. Standard pan-deck type concrete floor systems are used to complete the institutional grade construction system with superior sound and fire-resistive characteristics.

The steel panels are made of

structural tube steel posts with

light-gage furring channels and

neoprene spacers. When combined

with Type X Gypsum Wall Board, the

steel panels create a fire-resistive

assembly, allowing unlimited

building area that meets high-rise,

Type I Construction requirements.

The panel’s UL-rated walls provide

superior Sound Transmission Class

(STC) rating.

The time has come to embrace light-weight steel mid-rise buildings. We need urban density. This is how we can get it.

“ ”Tom Moisan, Ankrom Moisan Architects

SYSTEM’S STRENGTHS • Prefabrication is safer, more affordable, and because components are built in a

factory setting there is a high level of QA/QC

• The panel system is a contributing factor to LEED - MR Credit #4: Recycled Content

(66% of panel material is recycled)

• Our panel system can provide up to a 15% reduction in construction schedule

• Our panel system can provide up to a 20% cost savings over concrete

• OSHPD, USACE approvals pending

• Our fire-resistant wall panels meet ASTM E119, the1-hour rating for exterior walls,

and the 1- and 2-hour ratings for interior walls.

BUILDING TYPESMultifamily

Condominiums

Student Housing

Hospitality

Healthcare

Senior Living

THE SYSTEM IN ACTION A model of the system’s components.

“This approach makes downtown living affordable for the emerging demographic

that prefers compact, sustainable urban environments. It will change the face

of urban America.” - Barry Smith, Barry R Smith, PC, Architect

Adolfson & Peterson Construction has mastered just-in-time (JIT) delivery of this system through active involvement in Design Development. This allows:• Building designs to work within the economies of the

system• Engineers to eliminate inefficiencies• Three-dimensional modeling of every component of

the system A&P also provides the shop fabrication, delivery, and erection of the system, and takes control and accountability for all its components.

By totally controlling the process – from design and engineering to fabrication and assembly – A&P provides the innovative construction management that is required to create sustainable, competitively priced urban densities.

6021 12th Street East, Suite 100, Tacoma, WA 98424 p: 253-922-1884 | f : 253-922-2089

WA: RUSHFC305R1 | OR: 46792 WWW.A-P.COM

C r e a t i n g S u s t a i n a b l e , C o m p e t i t i v e l y P r i c e d U r b a n D e n s i t i e s