Embed Size (px)
DESCRIPTION
External door BQ
Citation preview
APPENDIX I
Item No. Description Qty Unit Rate
(RM)Amount
(RM)
ELEMENT NO 7 - EXTERNAL DOOR AND WINDOW
EXTERNAL DOOR
Supply and Fix the following door complete with galvanised iron door frame timber door leaf, architraves, fixing in position complete with ironmongeries and all necessary works for the complete installation of the doors:-
A Flush door; single leaf flush door complete with metal frame overall size 900mm x 2100mm ; all accordance to manufacturer's detail (D1)
35 No
B Flush door; double leaf flush door complete with metal frame overall size 1800mm x 2100mm ; all accordance to manufacturer's detail (D4)
1 No
C PVC door ; single leaf PVC door complete with metal frame overall size 1200mm x 2000mm; all accordance to manufacturer's detail.(D3) 1 No
Painting to door frame
Touch up primer and one undercoat and two finishing coats of "ICI" gloss enamel paint on surfaces of steel work
D Single leaf laminated flush door (900mm x 2100mm) 184 m
E Double leaf laminated flush door (1800mm x 2100mm) 6 m
F Single leaf laminated PVC door (1200mm x 2000mm) 5 m
Painting to door leaf
Knot, prime, stop and apply one undercoat and two finishing coats of "ICI" gloss paint on surfaces and edge of woodwork
G Single leaf flush door (900mm x 2100mm) 132 m2
H Double leaf flush door (1800mm x 2100mm) 8 m2
Other Items Allow for other items not listed but shown in the drawings for the proper execution and completion of the works:- a) ………………………………… b) …………………………………. c) …………………………………..
TO COLLECTION:
APPENDIX II
Table 1: Paint Coverage
Table 2: Labour Output for Painting
Description Surface ( 100 m2)
Timber Metal Plaster
1. Under Coat Paint
2. Primer Coat Paint
3. Finish Coat Paint
4. Varnish
5. To clean surface of timber
6. To fill surface of timber
7. Sand Paper
8 litre
7 litre
7 litre
5.5 litre
0.75 litre shellac
2 kg filler
10 pieces
8 litre
7 litre
7 litre
-
-
-
-
8 litre
-
8 litre
-
-
-
-
Description Painter ( Hour /100.00 m2)
Timber Surface Metal Surface Plaster Surface
1. To clean surface of timber
2. To fill surface of timber
3. Scrub with sand paper
4. To apply primer coat
5. To apply undercoat
6. To apply finish coat
3
3
3
8
8
9
-
-
-
8
8
9
-
-
-
-
8
9
APPENDIX II (cont’d)
Table 3: Adjustment for painting the difficult surface
Table 4: Labour Output to install the Door
Description Additional labour cost (%)
Additional material cost (%)
Pipe
- not exceeding 150mm girth
- 150mm - 300mm girth
- exceeding 300mm girth
Glass window
- with a small glass
- with a medium glass
- with a large glass
Narrow surface
- not exceeding 150mm girth
- 150mm - 300mm girth
35%
20%
5%
40%
20%
5%
30%
15%
15%
10%
5%
15%
5%
-
10%
5%
Types of Door Joiner (Hour/m2)
1. 40mm flush door with frame
2. 50mm solid flush door
3. 50mm panel door
4. 54mm fire-rating door
0.85
1.00
1.00
1.25
APPENDIX III
ASSUMPTION:
1. Wastage for material - 5%
2. Overhead and profit - 15%
3. Paint Brush usage - 5% of labour cost
4. Door size:
- D1 : 900mm x 2100mm x 40mm thick
- D3 : 1200mm x 2000mm x 40mm thick
- D4 : 1800mm x 2100mm x 40mm thick
5. Door frame size: 50mm x 150mm
