Appendix K. Miscellaneous Details · Figure K-9: Concrete Level Spreader Figure K-10: Baffle Weir for Cold Climates Figure K-11: Hooded Outlet with Hood Below Ice Layer Figure K-12:

Appendix K. Miscellaneous Details

K-1

Miscellaneous Design Schematics for Compliance with Performance Criteria

Figure K-1: Trash Rack for Low Flow OrificeFigure K-2: Expanded Trash Rack Protection for Low Flow OrificeFigure K-3: Internal Control for Orifice ProtectionFigure K-4: Observation Well for Infiltration PracticesFigure K-5: On-line Versus Off-line SchematicFigure K-6: Isolation/Diversion StructureFigure K-7: Half Round CMP HoodFigure K-8: Half Round CMP WeirFigure K-9: Concrete Level SpreaderFigure K-10: Baffle Weir for Cold ClimatesFigure K-11: Hooded Outlet with Hood Below Ice LayerFigure K-12: Shallow Angle Trash Rack to Prevent Icing

New York State Stormwater Management Design Manual Appendix K

K-2

Figure K.1 Trash Rack Protection for Low Flow Orifice


K-3

Figure K.2 Expanded Trash Rack Protection for Low Flow Orifice


K-4

Figure K.3 Internal Control for Orifice Protection


K-5

Figure K.4 Observation Well for Infiltration Practices


K-6

Figure K.5 On-Line Versus Off-Line Schematic


K-7

Figure K. 6 Isolation Diversion Structure


K-8

Figure K.7 Half Round CMP Hood


K-9

Figure K.8 Half Round CMP Weir


K-10

Figure K.9 Concrete Level Spreader


K-11

Figure K.10 Baffle Weir for Cold Climates


K-12

Figure K.11 Hooded Outlet with Hood Below Ice Layer


K-13

Figure K.12 Shallow Angle Trash Rack to Prevent Icing


K-14

Documents

Appendix K. Miscellaneous Details · Figure K-9: Concrete Level Spreader Figure K-10: Baffle Weir for Cold Climates Figure K-11: Hooded Outlet with Hood Below Ice Layer Figure K-12: