-
APPENDIX
-
3Appendix
APPENDIX
Ë Specifications
-
4 Appendix
Ë EXTRA VOICE Instrument List
-
5Appendix
Ë EXTRA VOICE Instrument List (cont.)
-
6 Appendix
Ë Preset Patch List
-
7Appendix
Ë Patch Parameter List
-
8 Appendix
Ë Patch Parameter List (cont)
-
9Appendix
Ë Patch Parameter List (cont)
-
10 Appendix
Ë Patch Parameter List (cont)
-
11Appendix
Ë Global Parameter List
-
12 Appendix
Ë Leslie Parameter List
Ë System Parameter List
Ë Tone Wheel Parameter List Ë Pipe Parameter List
-
13Appendix
Ë Drawbar Data List 1
Ë Drawbar Data List 2
-
14 Appendix
Ë Custom Tone Wheels List
-
15Appendix
Ë MIDI Implementation Chart
-
16 Appendix
Ë MIDI Implementation
-
17Appendix
Ë MIDI Templates
-
18 Appendix
Ë MIDI Channels and Messages
-
19Appendix
Ë System Exclusive Messages
-
20 Appendix
INSTRUMENT CARE
Ë AC Power
Be sure to turn the instrument “OFF” after use, and do not turn
the unit “ON” and “OFF” in quick succession, as this places an
undueload on the electronic components.
Ë Cabinet
Use a soft dry cloth for dusting. To remove fingerprints or
dulling film, use a soft cloth slightly moisten with water and a
little mild soap. Immediately wipe dry with a soft dry cloth.
Ë Keys And Buttons
To clean keys and buttons, use a clean soft cloth moistened with
water. Do not use any solvents, thinners or dryers such as
alcohol,gasoline, lighter fluid, carbon tetrachloride, etc. These
solutions may affect the letters and/or finish on the buttons and
keys.
Ë Moving Your Instrument
It is not necessary to bolt or fasten any parts of the
instrument when moving. Careful consultation with your mover will
assure you ofa satisfactory moving job.
-
21Appendix
Hammond maintains a policy of continuously improving and
upgrading its instruments and therefore reserves the right to
changespecifications without notice. Although every attempt has
been made to insure the accuracy of the descriptive contents of
this Guide,total accuracy cannot be guaranteed. Should the player
require further assistance, inquiries should first be made to your
AuthorizedHammond Dealer. If you still need further assistance,
contact Hammond at the following addresses:
In the United States contact:
HAMMOND SUZUKI USA, Inc.743 Annoreno Dr.Addison, IL 60101UNITED
STATES
In Europe and the U.K. contact:
HAMMOND SUZUKI EUROPE B.VIr. D.S. Tuynmanweg 4A
4131 PN VianenTHE NETHERLANDS
All other countries contact:
HAMMOND SUZUKI Ltd.25-12, Ryoke 2 Chome
Hamamatsu 430-0852 (Shizuoka)JAPAN
Technical materials are available and can be obtained by mailing
a request to the appropriate address listed above marked
ATTENTION:SERVICE DEPARTMENT.
Manufacturer:SUZUKI MUSICAL INSTRUMENT MFG. CO., Ltd
25-12, Ryoke 2 ChomeHamamatsu 430-0852 (Shizuoka)
JAPAN ACKNOWLEDGMENTSIn appreciation of the many fine players
who have made their contributions to Hammond over the years:
Axel AlexanderMilt BucknerBuddy ColeJesse CrawfordWild Bill
DavisJackie Davis"Papa" John DeFrancescoJoey DeFrancescoLenny
DeeCollins DriggsArtie DunnEddie DunstedterCharles EarlandRichard
EllsasserKeith EmersonFred FeibelVirgil FoxKen GriffinJon
HammondGlenn HardmanPorter HeapsRichard "Groove" HolmesMilt
HerthBob KamesAl KooperEddie LaytonJon LordCaptain Jack McDuffJimmy
McGriffLee MichealsDon Patterson
Big John PattonRichard PurvisBob RalstonRosa RioFreddie
RoachBryan RodwellDr. Mario SalvadorShirley ScottHal ShutzEthel
SmithJimmy SmithCor SteynPaul TaubmanShay TorrentJuan TorresRick
WakemanThomas "Fats" WallerWalter WanderlyLew WhiteBaby Face
WilletteGeorge WrightKlaus WunderlichPietro YonLarry Young
and many others toonumerous to list.
-
*** THIS PAGE INTENTIONALLY LEFT BLANK TO PRESERVE PAGE
FORMATTING ***
APPENDIXEXTRA VOICE Instrument ListPreset Patch ListPatch
Parameter List (cont)Patch Parameter List (cont)Patch Parameter
List (cont)Global Parameter ListLeslie Parameter ListSystem
Parameter ListDrawbar Data List 1Drawbar Data List 2MIDI
Implementation ChartMIDI ImplementationMIDI TemplatesMIDI Channels
and MessagesSystem Exclusive Messages
INSTRUMENT CAREAC PowerCabinetKeys And ButtonsMoving Your
Instrument
