Upload
lamkhuong
View
259
Download
6
Embed Size (px)
Citation preview
Topics CoveredConceptual MassingDivide Surface _ Curtain Panel Pattern Based _ Reference Point _ Reference Plane _ Parametric Component
Revit - Conceptual MassSTEP 1: open Revit _ open your class-07Conceptual Mass file _ select one surface
STEP 2: from the ribbon click on Divide Surface (//)
STEP 3: type shortcut PR _ for both the U & V Grids: set the Layout = Fixed Distance _ set the Distance = 10’-0” _ set the Justification = Beginning _ Ctrl + S
STEP 4: click on the Big “R” _open a New Family _ select Curtain Panel Pattern Based _ click on Open
2
1
14
3
Arch 427 Advanced Architectural Computing Fall 2010 Class-09 Revit 2
Topics CoveredConceptual MassingDivide Surface _ Curtain Panel Pattern Based _ Reference Point _ Reference Plane _ Parametric Component
STEP 5: from the ribbon click on ReferencePoint _ snap to the Midpoint of the upper leftline
STEP 6: select the reference point _ (we now have a reference plane that we can draw on)
STEP 7: draw a circle on the reference plane bysnapping to the reference point with a Radius = 1’ _ press esc twice
STEP 8: select the circle _ change the radius = 6” _ click on the temporary dimension symbol _ (this will make it a permanent dimension)
Save the file in your / Class-08 / Revit / Component folder as Rectangle_Component
6
7
28
5
reference point
reference plane
draw a circle
click on
change radius
Arch 427 Advanced Architectural Computing Fall 2010 Class-09 Revit 2
Topics CoveredConceptual MassingDivide Surface _ Curtain Panel Pattern Based _ Reference Point _ Reference Plane _ Parametric Component
STEP 9: select the dimension _ from the ribbon _ click on the Label pull down menu _ select Add parameter
STEP 10: from the Parameter Properties win-dow under Parameter Data change the name to: Radius _ change Group parameter under to: Dimensions _ click OK
STEP 11: from the ribbon click on Types _ from the Family Types window under Dimensions change the Radius Parameter = 3” _ Click OK
STEP 12: select the Circle & the Chain of lines _from the ribbon click on Create Form
10 312
9 11
select the circle & chain of lines
Arch 427 Advanced Architectural Computing Fall 2010 Class-09 Revit 2
16
Topics CoveredConceptual MassingDivide Surface _ Curtain Panel Pattern Based _ Reference Point _ Reference Plane _ Parametric Component
STEP 13: from the ribbon click back on Types _ change the Radius Parameter = 6” _ Click OK STEP 14: Ctrl + S _ from the ribbon click on Load Into Project _ select the divided surface
STEP 15: from the ribbon click on the Change Element Type pull down menu _ under Rectangle select rectangle_component
STEP 16: Ctrl + tab back over to the component file _ select the entire Form Element _ Type shortcut HH to Hide Element _ from the ribbon under Work Plane click on Show
14 4
15
13
select thedivided surface
select theform element
Arch 427 Advanced Architectural Computing Fall 2010 Class-09 Revit 2
place areference point
Topics CoveredConceptual MassingDivide Surface _ Curtain Panel Pattern Based _ Reference Point _ Reference Plane _ Parametric Component
STEP 17: from the ribbon under Work Plane click on Set _ set the work plane as shown in image 17
STEP 18: draw a Line as shown in image 18 _ place a reference point at the midpoint of the line
STEP 19: select the reference point _ draw a vertical line 4’ high _ select the line _ make the temporary dimension permanent
STEP 20: select the dimension _ from the ribbon _ click on the Label pull down menu _ select Add parameter _ name it: Height _ group it under: Dimensions
18 520
19
set the work plane
draw a line
17
draw a vertical line
make thedimensionpermanent
Arch 427 Advanced Architectural Computing Fall 2010 Class-09 Revit 2
24
Topics CoveredConceptual MassingDivide Surface _ Curtain Panel Pattern Based _ Reference Point _ Reference Plane _ Parametric Component
STEP 21: place a reference point at the top of line _ select the reference point and the two corner points STEP 22: from the ribbon in the draw panel click on Spline through points
STEP 23: select the spline and the two lower reference lines _ click on Create Form _ select the Surface icon
STEP 24: Ctrl + S _ from the ribbon click on Load Into Project
22 6
23
21
select the 3reference points
select
Arch 427 Advanced Architectural Computing Fall 2010 Class-09 Revit 2
28
Topics CoveredConceptual MassingDivide Surface _ Curtain Panel Pattern Based _ Reference Point _ Reference Plane _ Parametric Component
STEP 25: from the pop-up window click on Overwrite the existing version and its parameter values STEP 26: select the divided surface _ type PR _ click on Edit Type _ change the Height = 2’-0”
STEP 27: Ctrl + S _ open the Class-07 Project file _ Ctrl + tab back to the Mass file _ click on Load into Project _ select the Project (.rvt) file
STEP 28: from the Massing & Site tab turn on Show Mass _ turn on Shadows _ Ctrl + S
Class Assignment 08:Create plan, elevation, & 3D view jpegs of theTower from Revit _ Assemble them into one800 pixels wide X 600 pixels high jpeg with labels_ upload the jpeg to your webpage
Homework Assignment 04:Re-do the class-07 & 08 tutorials to design and create your own conceptual mass, floor slabs & skin component _ assemble a plan, elevation & 3D view in one image _ the image should be 1280 x 1024 pixels with text labels
26
25
27
7
Arch 427 Advanced Architectural Computing Fall 2010 Class-09 Revit 2