Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
15-1
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Contents
Architectural Specialty Windows
Basic unit Details
AKR Style Aluminum Clad Fixed Units to complement
400 Series Woodwright®, tilt-Wash & Gliding Windows
200 Series tilt-Wash & Gliding Windows
All 400 & 200 Series Patio Doors ....................................... 15-2
AKT Style Aluminum Clad Fixed Units to complement
400 & 200 Series casement & Awning Windows ...............15-10
AKW Style Aluminum Clad Fixed Units to complement
200 Series tilt-Wash Windows with 3-1/4” Jamb ...............15-12
AKE Style Aluminum Clad Fixed Units to complement
200 Series tilt-Wash Windows with Drywall return ............15-14
AKG Style Aluminum Clad Fixed Units to complement
200 Series Gliding Windows with Drywall return ...............15-15
AKS Style Aluminum Clad Fixed Units to complement
200 Series Narroline® Double-hung Windows ...................15-16
Options / Accessories
Andersen Grilles ..............................................................15-18
Plinth Blocks ...................................................................15-20
interior casing .................................................................15-21
Brickmould and Jamb clips .............................................15-24
Suggested Product Applications .............................................15-25
• Factory-applied 5-1/4”, 6-9/16”, 7-1/8” and custom width extension jambs
• Andersen™ divided light, removable interior grilles and contoured Finelight™ grilles-between-the-glass
• curved interior casings
• curved exterior aluminum and wood casings in matching radii and a variety of profiles
15-2
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
Basic Unit Details
AKR Style Aluminum Clad Fixed Window DetailsScale 3" = 1'-0" (1:4)
1-1/2"(38) 11/16" (18)
13/16" (21)
11/16" (18)
11/16" (18)
13/16" (21)
13/16" (21)
4-1/2" (114) Jamb Widthand Wall thickness
4-1/2" (114) Jamb Width
4-1/2" (114) Jamb Width 4-1/2" (114) Jamb Width
5-13/16" Front to Back (148)
1-5/16"(33)
1-5/16"(33)
1-5/16"(33)
1-5/16"(33)
Min
imum
rou
gh O
peni
ng h
eigh
t
unit
Dim
ensi
on h
eigh
t
unob
stru
cted
Gla
ss h
eigh
t 1
1/2
"(3
8) 1
1/2
"(3
8)
Optional interiortrim stop
Optional arch casing
high-Performance™ low-einsulating glass
Lineal Head
SillSill
Curved Head Curved Head
Sill
Curved Head
Vertical Sections
Sill
Curved Head
5-3/16" (132) Wall thickness
6-1/2" (165) Front to Back
3/4"(19)
6-1/2" (165) Wall thickness
7-13/16" (198) Front to Back
2" (51)
7-1/8" (181) Wall thickness
8-7/16" (214) Front to Back
2-5/8" (67)
To Complement: 400 Series Woodwright® and Tilt-Wash Double-Hung Windows 200 Series Gliding Window
15-3
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Basic Unit Details
AKR Style Aluminum Clad Fixed Window DetailsScale 3" = 1'-0" (1:4)
To Complement: All 400 & 200 Series Patio Doors 400 Series Gliding Window 200 Series Tilt-wash Double-Hung Window
1-1/2"(38) 11/16" (18)
13/16" (21)
11/16" (18)
11/16" (18)
13/16" (21)
13/16" (21)
4-9/16" (116) Jamb Widthand Wall thickness
4-9/16" (116) Jamb Width
4-9/16" (116) Jamb Width 4-9/16" (116) Jamb Width
5-7/8" Front to Back (148)
1-5/16"(33)
1-5/16"(33)
1-5/16"(33)
1-5/16"(33)
Min
imum
rou
gh O
peni
ng h
eigh
t
unit
Dim
ensi
on h
eigh
t
unob
stru
cted
Gla
ss h
eigh
t 1
1/2
"(3
8) 1
1/2
"(3
8)
Optional interiortrim stop
Optional arch casing
high-Performance™ low-einsulating glass
Lineal Head
SillSill
Curved Head Curved Head
Sill
Curved Head
Vertical Sections
Sill
Curved Head
5-1/4" (133) Wall thickness
6-9/16" (167) Front to Back
11/16"(17)
6-9/16" (167) Wall thickness
7-7/8" (200) Front to Back
2" (51)
7-1/8" (181) Wall thickness
8-7/16" (214) Front to Back
2-9/16" (65)
See joining section for optional exterior extension jambs.
15-4
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
high-Performance™ low-einsulating glass
Jamb
JambJamb
Jamb
JambJamb
Minimum rough Opening Width
unit Dimension Width
unobstructed Glass Width 1 1/2"(38)
1 1/2"(38)
Minimum rough Opening Width
unit Dimension Width
unobstructed Glass Width 1 1/2"(38)
1 1/2"(38)
4-1
/2"
(114
) Jam
b W
idth
1-5/16"(33)
1-5/16"(33)
11/16"(18)
13/16"(21)
4-9
/16"
(116
) Jam
b W
idth
Single Glazed Option Decorative triple Glazed Option
Horizontal Section
Horizontal Section
Horizontal Section
Basic Unit Details
AKR Style Aluminum Clad Fixed Window DetailsScale 3" = 1'-0" (1:4)
To Complement: 400 Series Woodwright® and Tilt-Wash Double-Hung Windows 200 Series Gliding Window
To Complement: All 400 & 200 Series Patio Doors 400 Series Gliding Window 200 Series Tilt-wash Double-Hung Window
15-5
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Joining Details
AKR Style Aluminum Clad Fixed Window Joined to 400 Series Woodwright® & Tilt-Wash Double-Hung WindowScale 3" = 1'-0" (1:4)
Head
Jamb
Jamb
Mullion
MullionTransom
AKR Style Aluminum Clad Fixed Window Joined to 200 Series Tilt-Wash Double-Hung Window for 4-1/2" WallScale 3" = 1'-0" (1:4)
Head
Mullion
Jamb
Jamb
Transom Mullion
Joining Compatibility Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. combination designs should always be checked for design pressure performance requirements to make sure the appropriate joining method is specified.
15-6
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
Head
Transom
Mullion
Mullion
Jamb
Jamb
Joining Details
AKR Style Aluminum Clad Fixed Window Joined to 200 Series Gliding Window for 4-1/2” WallScale 3" = 1'-0" (1:4)
AKR Style Aluminum Clad Fixed Window Joined to 400 Series Gliding WindowScale 3" = 1'-0" (1:4)
Head
Transom
Mullion
Mullion
Jamb
Jamb
Joining Compatibility Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. combination designs should always be checked for design pressure performance requirements to make sure the appropriate joining method is specified.
15-7
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Joining Details
AKR Style Aluminum Clad Fixed Window Joined to 400 Series Frenchwood® Gliding Patio DoorScale 3" = 1'-0" (1:4)
AKR Style Aluminum Clad Fixed Window Joined to 400 Series Frenchwood® Hinged Patio Door - InswingScale 3" = 1'-0" (1:4)
Head
Jamb
Jamb
Mullion
MullionTransom
Head
Jamb
Jamb
Mullion
MullionTransom
Joining Compatibility Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. combination designs should always be checked for design pressure performance requirements to make sure the appropriate joining method is specified.
15-8
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
AKR Style Aluminum Clad Fixed Window Joined to 200 Series Narroline® Gliding Patio DoorScale 3" = 1'-0" (1:4)
AKR Style Aluminum Clad Fixed Window Joined to 400 Series Frenchwood® Hinged Patio Door - OutswingScale 3" = 1'-0" (1:4)
Joining Details
Head
Jamb
Jamb
Mullion
MullionTransom
Head
Transom
Jamb
Jamb
Mullion
Mullion
Joining Compatibility Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. combination designs should always be checked for design pressure performance requirements to make sure the appropriate joining method is specified.
15-9
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
AKR Style Aluminum Clad Fixed Window Joined to 200 Series Perma-Shield® Gliding Patio DoorScale 3" = 1'-0" (1:4)
AKR Style Aluminum Clad Fixed Window Joined to 200 Series Hinged Patio Door - InswingScale 3" = 1'-0" (1:4)
Joining Details
Mullion
Mullion
Jamb
Jamb
Head
Transom
Head
Transom Mullion
Jamb Mullion
Jamb
Joining Compatibility Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. combination designs should always be checked for design pressure performance requirements to make sure the appropriate joining method is specified.
15-10
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
Basic Unit Details
AKT Style Aluminum Clad Fixed Window DetailsScale 3" = 1'-0" (1:4)
5-1/4" (133)Wall thickness
6-9/16" (167) Front to Back
2-3/8" (60)2-7/8" (73)
4-9/16" (116)Wall thickness
5-7/8" (149) Front to Back
1-5/16"(33)
1-5/16"(33)
1-5/16"(33)
1-11/16"(43)
2-7/8" (73)
1-5/16"(33)
1-5/16"(33)
2-7/8" (73) 2-7/8" (73)
6-9/16" (167) Wall thickness
7-7/8" (200) Front to Back
3-11/16" (94)
7-1/8" (181) Wall thickness
8-7/16" (214) Front to Back
4-1/4" (108)
1-13/16"(46)
1-1
3/16
"(4
6) 1
-13/
16"
(46)
11/16" (18)
1-1/8" (29)
11/16" (18)
1-1/8" (29)
11/16" (18)
1-1/8" (29)
Min
imum
rou
gh O
peni
ng h
eigh
t
unit
Dim
ensi
on h
eigh
t
unob
stru
cted
Gla
ss h
eigh
t
Optional extension jamb
Optional arch casing
2-7/8"Wall thickness
4-3/16" (106)Front to Back
Lineal Head
Sill Sill
Curved HeadCurved Head
Sill
Curved Head
Sill
Curved Head
Sill
Curved Head
Vertical Sections
To Complement: 400 and 200 Series Casement and Awning Windows
15-11
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Basic Unit Details
AKT Style Aluminum Clad Fixed Window DetailsScale 3" = 1'-0" (1:4)
AKT Style Aluminum Clad Fixed Window Joined to 400 & 200 Series Casement and Awning WindowsScale 3" = 1'-0" (1:4)
11/16" (18) 1-1/8" (29)
4-9
/16"
(116
) Jam
b W
idth
1-5/16" (33)
1 13/16"(46)
1 13/16"(46)
Minimum rough Opening Width
unit Dimension Width
high-Performance™ low-einsulating glass
Jamb
Jamb
Single Glazed Option
Decorative triple Glazed Option
Horizontal Section
Jamb Jamb
Horizontal Section
To Complement: 400 and 200 Series Casement and Awning Windows
Mullion
MullionTransom
Head
Jamb
Jamb
Joining Compatibility Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. combination designs should always be checked for design pressure performance requirements to make sure the appropriate joining method is specified.
15-12
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
Basic Unit Details
AKW Style Aluminum Clad Fixed Window DetailsScale 3" = 1'-0" (1:4)
To Complement: 200 Series Tilt-Wash Double-Hung Window with 3-1/4" Jamb
4-1/2" Front to Back
3-3/16"(81)
3-3/16" (81)Wall Thickness
5-1/4" (133)Wall Thickness
6-9/16" (167) Front to Back
2-1/16"(52)
6-9/16" (167)Wall Thickness
3-5/16"(84)
3-3/16"(81)
7-1/8" (181)Wall Thickness
8-7/16" (214) Front to Back
3-15/16"(100)
4-1/2" (114) Jamb Widthand Wall Thickness
5-13/16" (148) Front to Back
1-5/16"(33)
1-5/16"(33)
3-3/16"(81)
1-5/16"(33)
1-5/16"(33)
1-5/16"(33)
3-3/16"(81)
1-5/16"(33)
7-13/16" (198) Front to Back
1-1/2"(38)
11/16" (18)
13/16" (21)
11/16" (18)
11/16" (18)
13/16" (21)
13/16" (21)
Min
imum
Rou
gh O
peni
ng H
eigh
t
Unit
Dim
ensi
on H
eigh
t
Unob
stru
cted
Gla
ss H
eigh
t 1
1/2
"(3
8) 1
1/2
"(3
8)
Optional interiortrim stop
Optional arch casing
High-Performance™ Low-Einsulating glass
Lineal Head
Sill
Vertical Sections
Curved Head
Sill
Curved Head
Sill
Curved Head
Curved Head Curved Head
15-13
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Basic Unit Details
AKW Style Aluminum Clad Fixed Window DetailsScale 3" = 1'-0" (1:4)
To Complement: 200 Series Tilt-Wash Double-Hung Windows with 3-1/4" Jamb
4-1/
2" F
ront
to B
ack
3-3/
16"
(81)
Wal
l Thi
ckne
ss1-
5/16
"(3
3)
Minimum Rough Opening Width
Unit Dimension Width
Unobstructed Glass Width 1 1/2"(38)
1 1/2"(38)
High-Performance™ Low-Einsulating glass
Horizontal Sections
Jamb Jamb
Head
Jamb
Jamb
Mullion
Transom Mullion
AKW Style Aluminum Clad Fixed Window joined to 200 Series Tilt-Wash Double-Hung Window with 3-1/4” Jamb Scale 3" = 1'-0" (1:4)
Joining Compatibility Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. combination designs should always be checked for design pressure performance requirements to make sure the appropriate joining method is specified.
15-14
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
3-1/16" (78)Wall Thickness
Head
Jamb
Jamb
Jamb Jamb
Curved Head
Sill
Mullion
MullionTransom
4-3/8" (111) Front to Back
Min
imum
Rou
gh O
peni
ng H
eigh
t
Unit
Dim
ensi
on H
eigh
t
Unob
stru
cted
Gla
ss H
eigh
t 1
1/2
"(3
8) 1
1/2
"(3
8)
4-3/
8" (1
11) F
ront
to B
ack
3-1/
16"
(78)
Wal
l Thi
ckne
ss1-
5/16
"(3
3)
1-5/16"(33)
Minimum Rough Opening Width
Unit Dimension Width
Unobstructed Glass Width 1 1/2"(38)
1 1/2"(38)
High-Performance™ Low-Einsulating glass
Vertical Sections Horizontal Sections
Basic Unit Details
Joining Details Scale 3" = 1'-0" (1:4)
AKE Style Aluminum Clad Fixed Window DetailsScale 3" = 1'-0" (1:4)
To Complement: 200 Series Tilt-Wash Double-Hung Window with Drywall Return
Joining Compatibility Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. combination designs should always be checked for design pressure performance requirements to make sure the appropriate joining method is specified.
15-15
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Joining Compatibility Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. combination designs should always be checked for design pressure performance requirements to make sure the appropriate joining method is specified.
Basic Unit Details
AKG Style Aluminum Clad Fixed Window DetailsScale 3" = 1'-0" (1:4)
Nailing Fin is includedonly to position the window
at the specified wall thickness.Window to be anchored using
supplied installation clips.
2-3/4" (70)Wall Thickness
4-1/16" (103)Front to Back
1-5/16"(33)
2-3/
4" (7
0)W
all T
hick
ness
4-1/
16"
(103
)Fr
ont t
o Ba
ck
1-5/
16"
(33)
Min
imum
Rou
gh O
peni
ng H
eigh
t
Unit
Dim
ensi
on H
eigh
t
Unob
stru
cted
Gla
ss H
eigh
t 1
1/2
"(3
8) 1
1/2
"(3
8)
JambJamb
Minimum Rough Opening Width
Unit Dimension Width
Unobstructed Glass Width 1 1/2"(38)
1 1/2"(38)
High-Performance™ Low-Einsulating glass
Horizontal Sections
Head Jamb
Jamb
Mullion
Mullion
Transom
Sill
Vertical Sections
Curved Head
To Complement: 200 Series Gliding Window with Drywall Return
Joining Details Scale 3" = 1'-0" (1:4)
15-16
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
Basic Unit Details
AKS Style Aluminum Clad Fixed Window DetailsScale 3" = 1'-0" (1:4)
To Complement: 200 Series Narroline® Double-Hung Window
1-1/2"(38) 11/16" (18)
13/16" (21)
11/16" (18)
11/16" (18)
13/16" (21)
13/16" (21)
4-1/2" (114) Jamb Widthand Wall thickness
4-1/2" (114) Jamb Width
4-1/2" (114) Jamb Width 4-1/2" (114) Jamb Width
5-13/16" Front to Back (148)
1-5/16"(33)
1-5/16"(33)
1-5/16"(33)
1-5/16"(33)
Min
imum
rou
gh O
peni
ng h
eigh
t
unit
Dim
ensi
on h
eigh
t
unob
stru
cted
Gla
ss h
eigh
t 1
1/2
"(3
8) 1
1/2
"(3
8)
Optional interiortrim stop
Optional arch casing
high-Performance™ low-einsulating glass
Lineal Head
SillSill
Curved Head Curved Head
Sill
Curved Head
Vertical Sections
Sill
Curved Head
5-3/16" (132) Wall thickness
6-1/2" (165) Front to Back
3/4"(19)
6-1/2" (165) Wall thickness
7-13/16" (198) Front to Back
2" (51)
7-1/8" (181) Wall thickness
8-7/16" (214) Front to Back
2-5/8" (67)
15-17
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Basic Unit Details
AKS Style Aluminum Clad Fixed Window DetailsScale 3" = 1'-0" (1:4)
To Complement: 200 Series Narroline® Double-Hung Window
high-Performance™ low-einsulating glass
JambJamb
Minimum rough Opening Width
unit Dimension Width
unobstructed Glass Width 1 1/2"(38)
1 1/2"(38)
4-1
/2"
(114
) Jam
b W
idth
1-5/16"(33)
11/16"(18)
13/16"(21)
Horizontal Section
Transom Mullion
Mullion
Head
Jamb
Jamb
AKS Style Aluminum Clad Fixed Window Joined to 200 Series Narroline® Double-Hung WindowScale 3" = 1'-0" (1:4)
Joining Compatibility Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. combination designs should always be checked for design pressure performance requirements to make sure the appropriate joining method is specified.
15-18
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
Options / Accessories
400 Series Grille Options
Permanent Exterior Permanent Interiorwith Spacer
Full divided light features permanently applied interior and exterior grilles with spacers between the glass. Interior grilles are available in unfinished pine, maple, oak or prefinished white. Exterior grilles are patented Fibrex® material.
Simulated divided light offers grilles on the interior and exterior with no spacers between the glass. Interior grilles can be specified as permanent or removable. Interior grilles are available in unfinished pine, maple, oak or prefinished white. Exterior grilles are patented Fibrex® material.
Andersen® Finelight™ grilles are suspended between the glass panes and, in most cases, feature a contoured 3/4" profile. A 1" profile is used on patio doors, Springline™ windows and many arch windows. Finelight™ grilles are installed during manufacture and must be ordered with the unit. Removable interior grilles snap off for easy cleaning.
* Tinted glass may affect the appearance of Finelight grille color.
Configurations All grille configurations can be ordered with interior and exteriors to match window and patio door interiors and exteriors.
Full Divided Light Simulated Divided Light Easy-Clean Options
Permanent ExteriorPermanent Interior
Permanent ExteriorRemovable Interior
RemovableInterior
Finelight™ Grilles-Between-the-Glass*
15-19
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Options / Accessories
Grille ProfilesScale = Full - dimensions include thickness of tape
3/32"
5/16"
5/16" 7/16"
7/16"
45˚
2-1/4"
53˚3/8"3/8"3/8" 53˚
7/8"
45˚45˚
3/4"
53˚ 35˚
1-1/8"
35˚
1/2"
1-13/16"
5/16" 7/16"
2-1/4"7/8"3/4" 1-1/8"
1/2"
7/8"3/4" 1-1/8"
1/2" 1-13/16"
5/16"5/16"5/16"
Permanent Exterior Fibrex® Material Grille Profiles (chamfer profile). Also used for pre-finished interior, except 400 Series Woodwright® double-hung windows.
Permanent Interior Wood Grille Profiles (chamfer profile).the Fibrex® material exterior grille is used when a permanent prefinished grille is specified, except with 400 Series Woodwright® double-hung windows.
Removable Interior Wood Grille Profile (roman ogee profile). Removable Interior Wood Grille Profile (chamfer profile).400 Series Woodwright® double-hung windows only.
Permanent Full Divided Light Grille spacer location.
Andersen® Finelight™ Grilles-Between-the-Glass.
7/16"
7/8"3/4" 1-1/8"
3/8"
3/4"
1/2"
1"
1/8" 1/8" 11/16"1/16"
5/8" 5/8" 7/8" 7/8"
15-20
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
Trim Options and Applications
Plinth Blocks Available in maple, oak, cherr y, mahogany, and douglas fir.Scale: half
Optional Andersen®
interior arch casing(Colonial or Ranch styles)
Optional Andersen® transom casing
Optional Andersen® plinth blocks
Interior trim by others
For use with 2-1/4" or 2-1/2" casing See more trim option examples on the following pages.
2-7/8" (73)
1-1/8" R
2-7/8" (73)
7/8"(22)
7/8"(22)
For use with 3-1/2" casing
3-7/8" (98) 1-1/2" R
3-7/8" (98)
2-7/8" (73)
7/8"(22)
7/8"(22)
3-7/8" (98)
5-1/4" (133)
4" R
1-1/2" R
4" (102)
3" R
1-1/8" R
15-21
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
AKR Curved Window AKT Curved Window
Ranch Style - WM 3152-1/2" x 11/16" (64mm x 17mm)
Available in select hardwoods.
Colonial Style - WM 3512-1/2" x 11/16" (64mm x 17mm)
Available in select hardwoods.
Colonial Style - WM 4443-1/2" x 11/16" (89mm x 17mm)
Available in select hardwoods..
5/32" (4mm) typical
5/32" (4mm) typical
Ranch Style - WM 3242-1/4" x 11/16" (57mm x 17mm)
Available in select hardwoods.
Colonial Style - WM 3662-1/4" x 11/16" (57mm x 17mm)
Available in select hardwoods.
Trim Options and Applications
Interior CasingScale: FullAvailable for all cur ved portions of windows.
15-22
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
Interior arch casing
Lineal interior casing by others
Plinth block
Arch interior casing
Arch interior casing
Plinth block
3/16" mull casing
Plinth block by others
Mull casing by others
Plinth block
Mull casing
Lineal interior casing by others
Plinth block by others
Mull casing by others
Arch interior casing
Arch Window Arch Window
Curved Top Window Casement Window
Casement Window
Curved Top Window Casement Window
Arch Window Arch Window
Curved Top Window
Curved Top Window
Trim Options and Applications
Transom Joining of Cur ved Top
Arch Combination
Arch Palladium / Casement Combination
15-23
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Trim Options and Applications
Transom Joining of Partial Chord
Arch interior casing
Plinth block
Lineal interior casing by others
Arch extension jamb
Extension jamb
Angle cut extension jamb. Plinth block or casing will conceal gap.
Arch interior casing
Plinth block
Casement Window
Arch WindowArch Window
Frenchwood® Gliding Patio Door
Arch Window
Arch Window
Andersen® Gliding Patio Door
Frenchwood® Hinged Door - Inswing
15-24
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
Options / Accessories
Exterior Brickmould and Jamb Clips Scale 3" = 1'-0" (1:4)
Nailing Fin is includedonly to position the windowat the specified wall thickness.Window to be anchored usingsupplied installation clips.
Vertical DetailAKR7 Frame
1-5/16"(33)
OptionalAluminum Brickmould
1-3/8"(35) 3/4"
(19)
installation clip in shipping position
15-25
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Suggested Product Applications — AKR Style Aluminum Clad Fixed Windows
Wall Types Scale 1-1/2" = 1'-0" (1:8)
Vertical SectionBrick veneer / 2 x 6" Metal Stud Framing
Vertical SectionWood Siding / 2 x 4 Wood Stud Framing
Vertical Sectione.i.F.S. / concrete Masonr y unit (cMu)
Importance of Proper InstallationProper installation and maintenance of Andersen® products are essential if optimum performance is to be fully attained. Written installation instructions which provide guidelines for proper installation are available for Andersen products from your local Andersen supplier or by writing to: Andersen Windows, inc., Box 12, Bayport, MN 55003 or by visiting our website at www.andersenwindows.com. remember that every installation is different. Andersen strongly recommends consultation with an Andersen product representative and with an experienced contractor, architect, or structural engineer prior to the installation of any Andersen product. installation of Andersen products, including method of attachment, fastener selection, and code compliance is the sole responsibility of the architect, building owner, contractor, and/or consumer.
Construction by OthersAndersen corporation is not responsible for the design of, conditions in, or performance of, adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration of the Andersen units with the weather-repellent system of the building is the responsibility of others.
NOte: Where e.i.F.S. wall finish is adjacent to window units, contact e.i.F.S. manufacturer for installation instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the proper width of sealant
joint around the perimeter of the window.
NOte: leave adequate clearance between sill and masonry for caulking and dimensional change of framework. installation flange may be removed where construction sequence/ detailing requires no flange.
Transom
Min
. Rou
gh O
peni
ng H
eigh
t
Unit
Dim
ensi
on H
eigh
t
Head
Installation flange all around
Optional Andersen® 3/4" x 5-1/2" (19 x 140) vinyl trim board
Installation flange all around
Andersen® Woodwright™ unit
Optional Andersen® arch casing
Unit
Dim
ensi
on H
eigh
t
Min
imum
Rou
gh O
peni
ng H
eigh
t
Head
Transom Optional Andersen®
inside transom casingOptional modifiedAndersen® vinyl trim strip set in sealant
Andersen®
Woodwright™ unit
Installationflange athead
Membrane flashing over installationflange(by others)
Unit
Dim
ensi
on H
eigh
t
Min
imum
Rou
gh O
peni
ng H
eigh
t
Head
Transom Optional Andersen®
inside transom casingOptional modifiedAndersen® vinyl trim strip set in sealant
Andersen®
Woodwright™ unit
Removeinstallationflange all around
15-26
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
Suggested Product Applications — AKR Style Aluminum Clad Fixed Windows
Wall Types Scale 1-1/2" = 1'-0" (1:8)
Importance of Proper InstallationProper installation and maintenance of Andersen® products are essential if optimum performance is to be fully attained. Written installation instructions which provide guidelines for proper installation are available for Andersen products from your local Andersen supplier or by writing to: Andersen Windows, inc., Box 12, Bayport, MN 55003 or by visiting our website at www.andersenwindows.com. remember that every installation is different. Andersen strongly recommends consultation with an Andersen product representative and with an experienced contractor, architect, or structural engineer prior to the installation of any Andersen product. installation of Andersen products, including method of attachment, fastener selection, and code compliance is the sole responsibility of the architect, building owner, contractor, and/or consumer.
Construction by OthersAndersen corporation is not responsible for the design of, conditions in, or performance of, adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration of the Andersen units with the weather-repellent system of the building is the responsibility of others.
NOte: Where e.i.F.S. wall finish is adjacent to window units, contact e.i.F.S. manufacturer for installation instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the proper width of sealant
joint around the perimeter of the window.
NOte: leave adequate clearance between sill and masonry for caulking and dimensional change of framework. installation flange may be removed where construction sequence/ detailing requires no flange.
Vertical SectionBrick / concrete Masonr y unit (cMu)
Vertical SectionStucco / concrete Masonr y unit
(cMu) inset Window
Vertical Sectionexisting Stud Wall
Vertical Sectionexisting Masonr y Wall
Optional Andersen® auxiliary casing
Unit
Dim
ensi
on H
eigh
t
Min
imum
Rou
gh O
peni
ng H
eigh
t
Head
Transom Optional Andersen® inside transom casing
Optional modified Andersen® vinyl trim strip set in sealant
Andersen® Woodwright™ unit
Optional Andersen®
auxiliarycasing
Unit
Dim
ensi
on H
eigh
t
Min
imum
Rou
gh O
peni
ng H
eigh
t
Head
Transom Optional Andersen®
inside transom casing& plinth block
Optional modifiedAndersen® vinyl trim strip set in sealant Andersen® Woodwright™ unit
Optional Andersen®
arch casingOptional Andersen®
vinyl trim board
Existingframe wall
TransomOptionalAndersen® vinyl trim strip set in sealant
Andersen®
Frenchwood®
Hinged Patio Door
Optional Andersen®
inside transom casing & plinth blocks
Roug
h Op
enin
g He
ight
Unit
Dim
ensi
on H
eigh
t Head
Transom Optional Andersen® inside transom casing & plinth blocks
OptionalAndersen® vinyl trim strip
Andersen® Frenchwood® Patio Door
Existing masonry wall
Optional Andersen® vinyl trim board. Trim to fit as required. Finish trimmed edge with Optional Andersen®
rigid vinyl channel
Min
imum
Rou
gh O
peni
ng H
eigh
t
Unit
Dim
ensi
on H
eigh
t Head
Optional Andersen® arched extension jamb trimmed to fit
15-27
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l er e v . 0 3 / 0 8
Suggested Product Applications — AKT Style Aluminum Clad Fixed Windows
Vertical SectionBrick veneer / 2 x 6" Metal Stud Framing
Vertical SectionWood Siding / 2 x 4 Wood Stud Framing
Vertical Sectione.i.F.S. / concrete Masonr y unit (cMu)
Wall Types Scale 1-1/2" = 1'-0" (1:8)
Importance of Proper InstallationProper installation and maintenance of Andersen® products are essential if optimum performance is to be fully attained. Written installation instructions which provide guidelines for proper installation are available for Andersen products from your local Andersen supplier or by writing to: Andersen Windows, inc., Box 12, Bayport, MN 55003 or by visiting our website at www.andersenwindows.com. remember that every installation is different. Andersen strongly recommends consultation with an Andersen product representative and with an experienced contractor, architect, or structural engineer prior to the installation of any Andersen product. installation of Andersen products, including method of attachment, fastener selection, and code compliance is the sole responsibility of the architect, building owner, contractor, and/or consumer.
Construction by OthersAndersen corporation is not responsible for the design of, conditions in, or performance of, adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration of the Andersen units with the weather-repellent system of the building is the responsibility of others.
NOte: Where e.i.F.S. wall finish is adjacent to window units, contact e.i.F.S. manufacturer for installation instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the proper width of sealant
joint around the perimeter of the window.
NOte: leave adequate clearance between sill and masonry for caulking and dimensional change of framework. installation flange may be removed where construction sequence/ detailing requires no flange.
Min
. Rou
gh O
peni
ng H
eigh
t
Unit
Dim
ensi
on H
eigh
t
Head
Installation flange all around
Optional Andersen®
extensionjambs
Optional Andersen®
3/4" x 5-1/2"(19 x 140)vinyl trimboard
Installationflangeall around
Andersen®
casement unit
Head
Transom
Unit
Dim
ensi
on H
eigh
t
Min
imum
Rou
gh O
peni
ng H
eigh
t
Remove installation flange at head
Optional Andersen®
inside transom casingOptional Andersen® vinyl trim strip set in sealant and wood filler
Andersen®
casement unit
Unit
Dim
ensi
on H
eigh
t
Min
imum
Rou
gh O
peni
ng H
eigh
t
Head
Transom Optional Andersen®
inside transom casingOptional Andersen® vinyl trim strip set in sealant and wood filler
Andersen®
casement unit
Installationflange athead
Membrane flashing over installationflange(by others)
15-28
S p e c i a l t y W i n d o w s
A r c h i t e c t u r A l D e t A i l F i l e r e v . 0 3 / 0 8
Suggested Product Applications — AKT Style Aluminum Clad Fixed Windows
Vertical SectionBrick / concrete Masonr y unit (cMu)
Vertical SectionStucco / concrete Masonr y unit
(cMu) inset Window
Vertical Sectionexisting Stud Wall
Vertical Sectionexisting Masonr y Wall
Wall Types Scale 1-1/2" = 1'-0" (1:8)
Importance of Proper InstallationProper installation and maintenance of Andersen® products are essential if optimum performance is to be fully attained. Written installation instructions which provide guidelines for proper installation are available for Andersen products from your local Andersen supplier or by writing to: Andersen Windows, inc., Box 12, Bayport, MN 55003 or by visiting our website at www.andersenwindows.com. remember that every installation is different. Andersen strongly recommends consultation with an Andersen product representative and with an experienced contractor, architect, or structural engineer prior to the installation of any Andersen product. installation of Andersen products, including method of attachment, fastener selection, and code compliance is the sole responsibility of the architect, building owner, contractor, and/or consumer.
Construction by OthersAndersen corporation is not responsible for the design of, conditions in, or performance of, adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration of the Andersen units with the weather-repellent system of the building is the responsibility of others.
NOte: Where e.i.F.S. wall finish is adjacent to window units, contact e.i.F.S. manufacturer for installation instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the proper
width of sealant joint around the perimeter of the window.
NOte: leave adequate clearance between sill and masonry for caulking and dimensional change of framework. installation flange may be removed where construction sequence/ detailing requires no flange.
Unit
Dim
ensi
on H
eigh
t
Min
imum
Rou
gh O
peni
ng H
eigh
t
Optional Andersen® auxiliary casing
Head
Transom Optional Andersen® inside transom casing
Optional Andersen® vinyl trim strip set in sealant and wood filler
Andersen® casement unit
Optional Andersen®
auxiliarycasing
Installation flange at head
Unit
Dim
ensi
on H
eigh
t
Min
imum
Rou
gh O
peni
ng H
eigh
t
Optional Andersen®
plinth blocks
Head
Transom Optional Andersen®
inside transom casing
Optional Andersen®
extension jambs
Optional Andersen® vinyl trim strip set in sealant and wood filler
Andersen®
casement unit
Optional Andersen®
vinyl trim board
Existingframe wall
Transom Optional Andersen®
inside transom casingOptional Andersen® vinyl trim strip set in sealant and wood filler
Andersen®
casement unit
Optional Andersen®
plinth blocks
Min
imum
Rou
gh O
peni
ng H
eigh
t
Unit
Dim
ensi
on H
eigh
t
Head
Optional Andersen®
extensionjambs
Transom Optional Andersen® inside transom casing & plinth blocks
Optional Andersen® vinyl trim strip set in sealant and wood filler
Andersen®casement unit
Existing masonry wall
Optional Andersen® vinyl trim board. Trim to fit as required. Finish trimmed edge with Optional Andersen®
rigid vinyl channel
Min
imum
Rou
gh O
peni
ng H
eigh
t
Unit
Dim
ensi
on H
eigh
t
Head
Optional Andersen® extension jamb