Upload
rahul-gosavi
View
29
Download
2
Embed Size (px)
Citation preview
WELCOME
Office Address -: Art floor Manisha Housing Society Sector 24 d/3,
Nigdi Pradhikaran, Pune-411044.
: 9689907152 / 8308771241 / 8379025574
: www.artfloor.co.in
PU Concrete
Polyurethane concrete flooring
High abrasion resistanceHigh impact and chemicalresistanceWater-based and hence VOCcompliantShort pot lifeAvailable in limited shade
••
•
••
EPOXY FLOORINGS
Cipoxy series represent products based on Bisphenol A based epoxide resin andcuring agents like polyamido amines and cyclo aliphatic amines.
Features :
••
•
•
•
•
•
Excellent adhesionExcellent gloss, unmatched so farSelf leveling propertiesGood chemical resistanceFood grade, tested at CFTRI, MysoreSuitable for pharma & food processing industriesMoisture insensitive
EPU FLOORINGS
The new generation EPU based floor toppings offer excellent abrasion resistance,flexibility, chemical resistance and fast curing properties. EPU is a multi polymer,hybrid of epoxy and PU, where the functional properties of both the products arecombined to impart the optimum properties. It scores over conventional epoxies aswell as polyurethanes in terms of performance. Its end use applications includeautomobile plants, pharma, food processing industries, chemical plants etc.
Features :
••
•
•
•
•
•
•
Excellent adhesionInsensitive to moistureHighly flexibleExcellent abrasion and impact resistanceExcellent gloss and self levelling propertiesGood chemical resistance. No cracks on jointsFlexo hard and Fast settingNo bubbles
PU FLOORINGS
The PU coatings, aromatic as well as aliphatic to give the best abrasion andchemical resistant coatings. These are reaction products of NCO terminatedadducts and OH terminated polyols like polyesters and polyethers.
Features :
••
•
•
•
•
•
Excellent abrasion resistanceExcellent chemical resistanceExcellent impact resistanceAvailable in matt finishesSuitable for engg industriesSuitable as CRF (chemical resistant floorings)Sensitive to moisture
ESD FLOORINGS
Static control flooring is defined as a flooringcharges by grounding personnel, equipment orfloor surface or that controls the generation
system that can drain staticother objects contacting theand accumulation of static
charges. There are two categories according to ASTM F-150-98 : Conductive &Static dissipative.
Conductive Floor has a resistance of 2.5 x 104–106 ohms per 3 ft. It can drainstatic charge dissipating a 5000-volt charge to zero in 0.05 seconds.
Static Dissipative floor has a resistance of 106-109 ohms per 3 ft. It can drainstatic charge dissipating a 5000- volt charge to zero in less than 0.2 seconds.
ESD FLOORINGS - advantages
•
•
•
•
•
•
•
•
Higher mechanical properties than concrete.
Durable.
Constant level of conductivity.
Low maintenance.
Superior chemical resistance.
Seamless.
Available in attractive shades.
Available in conductive and static-dissipative
forms.
Meets EOS/ESD standard 7.1 or NFPA 99 A
guide.
•
Weight loss after 1000 Cycles :
Abrasion resistance (wear & tear)
1 kg load, 1000 revolutions, CS17 wheel
Epoxy floorings 70 – 75 mg loss
EPU floorings 30 – 40 mg loss
PU floorings 20 – 30 mg loss
EP-PU floorings 10 – 15 mg loss
ESD floorings 30 – 40 mg loss
PU concrete floorings 65 – 70 mg loss
Green floors 140-150 mg loss
Poly aspartic floorings 50 – 55 mg loss
One-day floorings 50 – 55 mg loss
Densi Polished floors ---
Deck coatings ---
Dirt can easily be rem
Dust proof
oved by normal dry or wet cleaning.
Epoxy floorings Yes
EPU floorings Yes
PU floorings Yes
EP-PU floorings Yes
ESD floorings Yes
PU concrete floorings Yes
Green floors Yes
Poly aspartic floorings Yes
One-day floorings Yes
Densi Polished floors Yes
Deck coatings Yes