Arte-PAR-36 Spotlight - PAR-36 LED

Category: The Arte-AR-PAR-36 is part of a series of highly engineered spotlights with beautifully machined brushed finishes and a clean architectural design. Exclusively designed to accommodate the new Soraa PAR-36 lamps either in an open design for use with Soraa’s optional “Snap-On” Media or with Tegan’s Media Holder that will accommodate up to three (3) media.

Spotlight: Arte-PAR-36.

Material: Machined aluminum.

Finish: Brushed Aluminum (AL), Black (BLK), or White (WH).

Systems: Arte-PAR-36 is used with one of Tegan’s versatile connectors (Spot connector is specified separately) that will enable easy connection to the full range of Systems and Monopoints. Refer to System Spec Sheets and Installation Sheets for more detail: Centro Trac System (CTS), Retrac System (RTS), Monopoint Surface - Integral Transformer (MPS-IT), Monopoint Recessed Flat Plate - Remote Power Supply (MPRFP-RP), Monopoint Recessed Trimless - Remote Power Supply (MRTL-RP), Monopoint Panel Mount - Remote Power Supply (MPPM-RP), Single Recessed Enclosure Monopoint (MP-1-RE), Double Recessed Enclosure Monopoint (MP-2-RE).

Connectors: System Connectors are used with Spotlight as specified (Spot connector is specified separately). Centro Trac 90° Connector (C90C), Centro Trac Connector (CTC), Retrac Connector (RTCN), Monopoint - No Connector required (MP).

Adjustment: Smooth, 360° bearing rotation with 90° locking vertical adjustment.

Source: One Soraa PAR-36 18.5W LED lamp with G53 base, or lamp by others. Contact Tegan to order PAR-36 lamps and “Snap-On” Media. NOTE: For dimming LED PAR-36 lamps (Soraa) with 12VAC transformers, please refer to page 5 of the PAR-36 LED Specsheet.

Power Supply: Refer to 12VAC Electronic Transformer Specsheet or 12VAC Magnetic Transformer Specsheet for Power Supply options.

Installation: There is a locking mechanism in the Spot base to secure the PAR-36 lamps. Tegan’s optional Media Holder is secured to the Soraa lamp with set screws (2). For system layout, and specification assistance, refer to the Trac Design Guide under the Gallery link.

Accessories: Arte-PAR-36 Media Holder X 3 (AARMHx3), Arte-PAR-36 Honeycomb Louver - Black (AARHCLB), Arte-PAR-36 Prismatic Lens (AARPL), Arte-PAR-36 Sandblasted Lens (AARSBL), Arte-PAR-36 Linear Spread Lens (AARLSL), Arte-PAR-36 Softening Lens (AARSFL), Arte-PAR-36 Solite Lens (AARSOL). UV lenses - Contact factory. 72” Spot Extension (SpotExt72), 72” (DSpotExt72).

Labels: ETL & CE Listed; Tested to UL 1574 - Issue: 2004/09/07 Ed: 3 Rev:2012/01/25 UL Standard for Safety Track Lighting Systems. IP20. Interior use only. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. 3 Year Warranty.

90˚ 360˚Available

AccessoriesIP

Exclusive with Soraa’s PAR-36 LED!

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG21 6/17 1

PAR-36 LED

Tegan Spotlight Source2,3 Finish2 System1,2System

Connectors1,2 Accessories3

TG Arte-PAR-36

CTSRTSMPS - ITMPRFP - RPMRTL - RPMPPM - RP

C90C(Centro only)

CTC(Centro only)

RTCN(Retrac only)

MP(No connector)

AARMHX33

AARHCLB3

AARPL3

AARSBL3

AARLSL3

AARSFL3

AARSOL3

SpotExt72 - AL, BLK, or WH4

DSpotExt72 - AL4

Example: TG - Arte - PAR-36 - PAR-36-18.5W - AL - CTS - C90C - PL16

_ _ _ _ _ _

Arte-PAR-36 - Spotlight

CLICK

TWIST

The Twist & Click system allows the Spotlights to be easily removed. The Spotlights click into the jack plug socket, the threaded jacket then screws into position to lock the connection in place. Once fixed, the luminaires are free to rotate or can be secured using two locking pins. Supplied separately.

Twist & Click System

The Arte-PAR-36 Spotlight was designed for exclusive use with the Soraa PAR-36 LED lamps, combining design excellence with precision engineering. It also features excellent beam control with the use of Media. Shown with optional Media Holder; ordered separately. Refer to Accessories for details.

Note:1 System Connectors are required and they are supplied separately as specified in this catalog number. Monopoints do not require connectors. Trac, Cable, Monopoints, and Power Supply(s) are to be specified separately. Refer to linked Spec Sheets on page 1.2 Select one. Supplied separately.3 Contact factory to order PAR-36 lamps and “Snap-On” Media. 4 See “Arte-PAR-36 - Accessories” on following page for optional Spot Extension details.

Arte-PAR-36 (Arte-PAR-36-AL)

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG21 6/17 2

AL BLKWH

Arte-PAR-36 Aluminum finish (AL), rear view with PAR-36 and Tegan Media Holder.

Arte-PAR-36; Aluminum finish (AL), front view with PAR-36 and two Soraa Snap-On Media. No Media Holder.

Arte-PAR-36; Aluminum Finish (AL), side view with PAR-36 and two Soraa Snap-On Media. No Media Holder.

Arte-PAR-36 with Flat Plate Monopoint; White finish (WH), side view with PAR-36 and Tegan Media Holder.

95mm(3 -3/4”)

ø119mm(4 -11/16”)

146mm(5 -3/4”)

Optional Media Holder

PAR-36-18.5W

Arte-PAR-36 Spotlight - PAR-36 LED

Connector for Retrac System. Brushed Aluminum (AL) finish. Supplied separately as specified.

Retrac Connector (RTCN-AL)

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG21 6/17 3

Arte-PAR-36 - System Connectors

ø19mm(3/4”)

25mm(1”)

ø19mm(3/4”)

25mm(1”)

Straight Connector for Centro Trac system. Brushed Aluminum (AL) finish. Supplied separately as specified.

25mm (1”)

ø19mm (3/4”)

ø19mm(3/4”)

25mm(1”)

90° Connector for Centro Trac System. Brushed Aluminum (AL) finish. 90° off of ceiling mount Trac or wall mount application. Supplied separately as specified.

Centro Trac Connector (CTC) Centro 90° Connector (C90C)

ø28mm(1 1/8”)

17mm(11/16”)

13mm(1/2”)bottom of

Retrac

Arte-PAR-36 Spotlight - PAR-36 LED

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG21 6/17 4

Connector Spot Extension that attaches to any system to extend the Spot 72” from the System Connector. Specify with the appropriate system connector supplied separately (not required with Monopoints). Brushed Aluminum (AL), Black (BLK), or White (WH) finish. Can be cut to shorter lengths at the factory.

72” Spot Extension (SpotExt72)

Connector for mounting two spotlights. Specify with the appropriate system connector supplied separately (not required with Monopoints). Available in Brushed Aluminum (AL), Black (BLK), or White (WH) finish. Can be cut to shorter lengths at the factory. Refer to Installation Instructions for details.

81mm(3 3/16’)

ø24mm(15/16”)

1.8m(72”)1.8m

(72”)

Can accommodate up to three (3) Media. Alumi-num (AL), Black (BLK), or White (WH) finish options.

1/8” Hexcell black metal. Controls spill illumination and glare.

Creates a symmetrical broadening of the lamp beam.

Arte-PAR-36 - Accessories

ø108mm(4 -1/4”)

ø108mm(4 -1/4”)

Arte-PAR-36 Media Holder 3 (AARMHX3)

Arte-PAR-36Honeycomb Louver (AAR-HCLB)

Arte-PAR36 Prismatic Lens (AARPL )

Creates an uniform beam pattern that is useful for wall washing.

Will extend the lamp’s beam along one axis, allowing hightlighting of wider areas from a single fixture.

Smooths and widens irregular beam pattern.

ø108mm(4 -1/4”)

ø108mm(4 -1/4”)

ø108mm(4 -1/4”)

Arte-PAR-36 Sandblasted Lens(AARSBL)

Arte-PAR-36 Linear Spread Lens (AARLSL)

Arte-PAR36 Softening Lens (AARSFL)

ø57

11

ø119mm(4 -11/16”)

11mm(7/16”)

Tempered glass with a stipple effect that that pro-vides obscurity while retaining high transmission values. This low-iron optically clear glass offers maximum transmission and minimal absorption.

ø108mm(4 -1/4”)

Arte-PAR-36 Solite Lens (AARSOL)

72” Double Spot Extension (DSpotExt72)

Arte-PAR-36 Spotlight - PAR-36 LED