Upload
jaidyn-bowling
View
219
Download
0
Tags:
Embed Size (px)
Citation preview
Artel Climabox System
Artel’s Climabox is a technical innovation because:
it is able to make the most of the two principal natural resources: gas and water
it allows the combination of the activities of a boiler with those of a condenser
What is the Climabox ?
Climabox is composed of two main units
the standard condenser unit cools the gas R407c
with direct expansion
Plus: air/water exchanger Thanks to the large capacity, the
Climabox always guarantees a minimum water store
ideal for the combination with the microprocessor of new generation
Made of a particular antifreeze material to be able to work down to very low temperatures
anomalies in the temperature regulation do not disturb the exchange system
Plus: The microprocessor
Intelligent management of energy is
possible thanks to the use of amicroprocessor controlling the
activity of: the compressor (reduction in
the number of the start-ups) the fan
Reduction of consuption and noise
Plus:The Microprocessor
allows colder wather a thermal head of 7/8 degrees the limitation of the number of
start-ups of the compressor
The complete removal of the accumulation tank
The microprocessor allows the limitation of the number of start-ups of the compressor in a hour
• colder wather, or warmer in heating mode
• a thermal head of 7-8 degrees
• improve machine yield
Plus:The Microprocessor
Plus:The Microprocessor
The microprocessor simulates the operation of the accumulation tank
Without microprocessor and accumulation tank With microprocessor and without accumulation tank
Scroll Rotating
The compression occurs in a rotating manner with appropriate spirals which compress the gas.
•fewer moving parts, fewer vibrations, lower energetic consumption •Better performance, better reliability, lower noise
spirals and compression of gas
Principles of operation
water entrance Plant inlet-outlet
***ecologic: Climabox uses the same water inside, without any waste or the need to refill.
How to install the Climabox
The Climabox is ideal for connection to and interface with a common gas powered heating boiler
The use of a single convection system
The alternate use by the two units:
- in the summer for a drop in temperature only Climabox operates
- in winter Climabox or boiler can operate individually
or at the same time
How to install the Climabox
The Climabox is suitable for two types of installation:
external: the two units are mounted together on the exterior of building
How to install the Climabox
internal: only the condenser unit is mounted on the exterior of the building while the additional unit is installed inside.
The Climabox is ideal for the conditioning of different rooms
placed on different floors and at different distances
with high head pumps
Climabox destination
Maximum efficiency in presence of large height differences,
pressure losses and when used for multiple internal units.
The Climabox: the versatility
Versatility: a system able to be managed by a plumber
Versatility: a plant able to facilitate maintenance interventions by technical
Versatility: the use of easy-to-get components
The Climabox and the Competitors
Dimensions suppressed in the width in comparison to competitors to assure an easy installation and less obstacles
The Climabox is mass-product with a specific pressing (metal-die) that improve the performance in terms of power and the aesthetics ( to knock off the rough edges and the desing of supports)