ASMi-54L v.2.67 GA

ASMi-54L Ver. 2.5 – 2010 Slide 1

ASMi-54L v.2.67 GA


Agenda

• Introduction• Product Overview• Applications • Feature Comparison• Product/Portfolio Value Proposition• Sales Tools On-Line• Ordering information• Summary


AXCESS+ for Carriers


Market Segments


First Mile – Product Portfolio


ASMi Introduction


ASMi-5x - General Application

• ASMi-5x can operate as a CO device or a CPE device according to user configuration

• The modem is used for point-to-point Ethernet and E1 service extension over 2W and 4W and also over 8W for ETH connectivity

ASMi-5x

E1

FEFE

E1

ASMi-5x2/4 wires PBXPBX


Major Customers

Insurance & BanksPublic SafetyGovernmentUniversityMilitary

Energy, Oil/Gas, Pipeline Water, Mine

Highway, Railways, Airports, Motorway, Marine

City Carrier, Cellular, ISP, Alternative Carrier, Incumbent Carrier


ASMi-54L Introduction

• Managed modem transmitting at full-duplex data rates of up to 5.7 Mbps over 2-wire and 11.4 Mbps over 4-wire lines

• Dual Bearer mode for E1 and Ethernet HDLC over 2-wire and 4-wire lines

• SHDSL bonding – for EFM: PAF according to IEEE802.3, for HDLC: M-Pair according to G.991.2

• SHDSL ITU-T G.991.2 and ETSI 101524 compliance

• 4-port 10/100BaseT interface with integrated switch

• Fully compatible with ASMi-54 standalone modem

ASMi-54L Ver. 2.5 – 2010 Slide 10

General Application

ASMi-54L

E1

4*FE4*FE

E1

ASMi-54L2/4 wires PBXPBX

• ASMi-54L can operate as a CO device or a CPE device according to user configuration

• The modem is used for point-to-point Ethernet and E1 service extension at rates of up to 11.4 Mbps or up to 22.8 Mbps using EFM bonding technology for ETH services.

ASMi-54L Ver. 2.5 – 2010 Slide 11

Physical View

Wide range, AC/48VDC power supply

24 VDC power supply

One SHDSLport, RJ-45

Optional One E1 port, RJ-45

Four ETH ports with integrated switch

ASMi-54L Ver. 2.5 – 2010 Slide 12

Main Features

Feature Description Customer Benefits

Extended rate

• Up to 11.4 Mbps/ 15 Mbps

• Special RAD proprietary solution provides extended rates of up to 15 Mbps over 2-wire lines.

• Cost effective solution for Ethernet services

• Enables higher rate over only one pair

Single segment (link) IEEE 802.3-2005former 802.3ah)

• Operation, Administration, and Maintenance (OAM) - discovers automatically if next hop supports 802.3ah and enable remote loopback of all traffic, fault propagation and connectivity check

• Detects line faults

• Measures performance on the SHDSL line

EOC (Embedded Operational Channel) management

• Remote loopbacks at the SHDSL repeater

• Monitoring alarms from the repeaters

• Indication on the SHDSL/SHDSL.bis repeaters on the chain

• Enables clear and high reliability in case of failure of one of repeaters

Alarm masking • Disables or enables the alarms on each port

• Improved maintenance and management control of the ETH, E1 and SHDSL alarms

ASMi-54L Ver. 2.5 – 2010 Slide 13

Main Features

Feature Description Customer Benefits

Rate limiting• Limits the ingress data rate on each Ethernet port

• Enables control and better utilization of the ETH traffic

Single IP support • LRS-102 uses Single IP (defined in central LRS-102 or MP-4100) to manage remote modems (via RADview only)

• Prevent the need to define many IP address at the remote sites

Dying Gasp

• ASMi-54L reports power failuresto the specified network management stations by sendingan SNMP trap

• Helps a service provider identifyand isolate the end-point deviceexperienced a power failure

DHCP (Dynamic Host Configuration

Protocol)

• Automates network parametersassignment to network devicesfrom one or more DHCP servers

• Simplifies host configuration• Eliminates wrong networkparameters configuration

BPDU (BridgeProtocol DataUnit)

• BPDU messages are exchangedacross bridges to detect loops ina network topology

ASMi-54L Ver. 2.5 – 2010 Slide 14

ASMi-54/54L – Key Selling Points

ASMi-54L Ver. 2.5 – 2010 Slide 15

ETH

ETH

ETH

ETH

Higher ETH Rate over DSL Lines – 11.4Mbps over one Pair

• Higher rate – Extended rate with RAD proprietary solution – 11.4/15 Mbps over 2 wire or

up to 30 Mbps over 4 wires

• Estimated Distances – Free of noise– 11.4 Mbps over 2 wires, 26AGW, ~ 1km

ETH

2 wire

11.4/15 Mbps

ASMi-54L ASMi-54LETH

ETH

ETH

ASMi-54L Ver. 2.5 – 2010 Slide 16

Ethernet OAM Tools

√ASMi-54L/LA-210

LA-210

LA-210

√

√

ASMi-54L Ver. 2.5 – 2010 Slide 17

OAM – Operations Administration & Maintenance

• Single segment (link) according to IEEE 802.3ah, enable:• Discovery• Connectivity check• Fault propagation

ETH

ETH

ETH

ETH

ETH

2 wire

802.3ah(Access link)


ETH

ETH

ASMi-54L Ver. 2.5 – 2010 Slide 18

OAM – Operations Administration & Maintenance

• Single segment (link) according to IEEE 802.3ah:

Passive and Active functionality modes supported. Discovery - ASMi54L device will automatically detect if

attached device supports OAM (802.3ah) and present the following information: OAM configuration, OAM mode, OAM PDU configuration and Platform Identity by MAC address.

Connectivity check - in case of OAM supported, the ASMi54L can provide details regard connectivity. It count number of seconds that connectivity were lost. The granularity is 1-10 frames every second.

ASMi-54L Ver. 2.5 – 2010 Slide 19

EOC Management Opposite SHDSL.bis Repeaters

• Monitoring and controlling SHDSL.bis repeaters– Enable remote loopback at the SHDSL repeater– Monitoring alarms from the repeaters– Indication on the SHDSL.bis repeaters on the chain

2w up to 4w

S-RPTPFH-4

ETH

ETH

ETH

ETH

ETH


ETH

ETH

ASMi-54L Ver. 2.5 – 2010 Slide 20

Typical Applications

• Highway – Road Communications

• Utilities – sites connectivity sites

• Service providers – City carrier

• Carrier Traffic – Ethernet and TDM Services over Copper or Fiber

ASMi-54L Ver. 2.5 – 2010 Slide 21

Highway Communications Customer Needs

• Connecting message sign and road barrier system to stop the traffic in case of an emergency

• Video camera connectivity for security and control

Customer Benefits• Manageable single unit• Up to 4 ETH ports to stop traffic in case of an emergency• Video camera connectivity for security and control

4 x ETH 4 x ETH

CCTV

ETH

SHDSL

SHDSL

ASMi-54L5.7 Mbps

ASMi-54L

SHDSL5.7 Mbps

ETHETH

ETH

SHDSL

ASMi-54L

ASMi-54L ASMi-54L ASMi-54L

CCTV

ASMi-54L

RADview

ASMi-54L Ver. 2.5 – 2010 Slide 22

Utilities – Site Connectivity • Single box solution for multiple services• TDM + Ethernet central solution• Any infrastructure• Resilient topologies

Control CenterAnalog/Digital Voice/SCADA,

Ethernet

SDH/SONET

FCD-155EMP-4100

FCD-155E

Airmux-200

Airmux-200

SCADA

MP-2100E1/T1

E1/T1

ETH

Teleprotection

SCADA

Voice

SHDSL

MP-2100

SCADA

PBXVoice

STM-1

SCADA

Voice

OP-106/8ASMi-54L

IP/MPLS GbE

MP-4100

SHDSL.Bis

MP-4100

E1 Ring

Teleprotection

PBXVoice

MP-2100

FCD-IP

MP-4100

Fiber

PBX

ASMi-54L Ver. 2.5 – 2010 Slide 23

E1s

GbE

Customer Needs• Centralized solution with management• Variety of access technologies and devices• Same equipment for both fixed and cellular networks

Customer Benefits

• Single management• Scalable solution• Unique solution: SHDSL concentrator with Gigabit Ethernet uplink

Megaplex-4100

Large PoP

IP/ETHNetwork

STM-1

ETH

ASMi-52LE1

ASMi-52LE1

ASMi-54L

ASMi-54L/RT

LAN

Small PoP

LRS-102

Cisco 7000

SHDSL

SHDSL

ETH

E1

E1

LAN

SHDSL

SHDSL

ETH

BSC

E1s

GSM Traffic GSM Traffic

Data TrafficData Traffic

Service Providers – City Carrier

ASMi-52L

ASMi-52L

ASMi-54L

ASMi-54L/RT

TDMNetwork

BTS

LAN

PC

BTS

BTS

BTS

PC

LAN

ASMi-54L Ver. 2.5 – 2010 Slide 24

City carrier – Ethernet and TDM Services over Copper or Fiber

Customer Benefits

• Reduce OpEx/CapEx using a multiservice aggregation device at the PoP• Both E1 and ETH services over single fiber• Ensure SLA by providing advance ETH services with QoS

Customer Needs

• Connecting different services over their infrastructure

• Enable high capacity aggregation device at the PoP• Simple and single multi-functional platform

n x E1

FE

E1

Customer A

SDHNetwork

STM-1

MP-4100

STM-1

GE

NMS

Internet

Customer B

OP-108

ASMi-54L

FE

Customer C

RICi-4E1

SHDSL.bis

GE

FO Link

n x E1

FE

E1

Customer A

Customer B

OP-108

ASMi-54L

FE

Customer C

RICi-4E1

FO Link

MP-4100

SHDSL.bis

FE

E1

FE

E1

ASMi-54L Ver. 2.5 – 2010 Slide 25

4 x ETH

4 x ETH

4 x ETH

4 x ETH

Pico-DSLAMETH Connectivity over Copper

Target Market :• Campuses, banks, ISP

Key Benefits:• Single or Dual ETH fiber in the central site• Cost-effective solution • Transmission via VLAN differentiation

2w

ETH5.7 MbpsASMi-54

2w

5.7 Mbps

2w

5.7 Mbps

2w

5.7 Mbps

PSN

ASMi-54L

ASMi-54L

ASMi-54L

ASMi-54L

ASMi-54L Ver. 2.5 – 2010 Slide 26

4 x ETH

4 x ETH

2w

ETH

5.7 MbpsASMi-54

ASMi-54L

ASMi-54L

ASMi-54L

ASMi-54L

2w

5.7 Mbps

2w

5.7 Mbps

2w

5.7 Mbps

PSN

4 x ETH

4 x ETH

Pico DSLAM for ETH connectivityRAD Advantages:• Multiport Ethernet switch in CPE device, no need for additional switch

• Single-box solution for 4 modems at the remote site

• Advanced Ethernet performance enables differentiation toward the PSN network

• Ethernet uplink over fiber or copper enables reaching great distance over any media

• Single management system for CPE and central devices

Customer Benefits:• CapEX saving:

– Single box for 4 remote sites– Single box reduce “real-estate”

• OpEX saving :– Training:

• One box for all services • One management system for CPE & Central- easier operation

Fiber or copper

ASMi-54L Ver. 2.5 – 2010 Slide 27

Interoperability opposite Huawei HONET UA5000

• Customer Type : Huawei’s HONET “holders “• Replacing low cost CPE’s vendors (Taiwanese), providing a

complete solution to Huawei

ASMi-52SHDSL E1

ASMi-54LSHDSL

POTS/ISDN

ETH

ADSL

Honet UA5000

FE/GBE

E1

E1/STM-1/4

Huawei NMS

IP/MPLS

PSTN

TDMETH

ASMi-54L Ver. 2.5 – 2010 Slide 28

Feature Comparison Table

ASMi-52 ASMi-52L ASMi-54 ASMi-54L ASMi-54LRT

Maximum data rate (Mbps)

2.3/4.6 2.3/4.6 5.7/11.4/22.8 5.7/11.4 5.7/11.4/22.8

Interface E1,ETH,V35,X.21 E1,ETH,4ETH,V35,X.21

E1,4ETH,4E1** version 3.5

E1,ETH E1,ETH

Max. Interfaces 2 1 2 2 2

Router N/A N/A N/A N/A Available

Line 2W/4W 2W/4W 2W/4W/8W 2W/4W 2W/4W/8W

ASMi-54L Ver. 2.5 – 2010 Slide 29

Ordering Information

Ordering Option Description

ASMi-54L/4ETH/2WManaged SHDSL.bis modem, four physical ETH ports(RJ-45), one pair, wide range

power supply (VAC & 48 VDC)

ASMi-54L/4ETH/2W/E1Managed SHDSL.bis modem, four physical ETH port (RJ-45), one E1 port (RJ-45), one

pair, wide range power supply (VAC & 48 VDC)

ASMi-54L/4ETH/4WManaged SHDSL.bis modem, four physical ETH ports (RJ-45), two pairs, wide range

power supply (VAC & 48 VDC)

ASMi-54L/4ETH/4W/E1Managed SHDSL.bis modem, four physical ETH port (RJ-45), one E1 port (RJ-45), two

pairs, wide range power supply (VAC & 48 VDC)

ASMi-54L/24V/4ETH/2WManaged SHDSL.bis modem, four physical ETH ports(RJ-45), one pair, 24 VDC power

supply

ASMi-54L/4ETH/2W/E1/ETRSHDSL.bis modem, four physical ETH port (RJ-45), one E1 port (RJ-45), one pair, wide

range power supply (VAC & 48 VDC), extended temperature support -20º to 70ºC.

ASMi-54L-LIC/HR License key for high data rate

ASMi-54L Ver. 2.5 – 2010 Slide 30

Management

• RADview-EMS is a unified carrier-class management platform for RAD devices using a variety of access channels as SNMPv1/3, HTTP/S, TFTP and Telnet/SSH. In addition, it features third-party device monitoring capabilities

ASMi-54L Ver. 2.5 – 2010 Slide 31

RADview-EMS Advanced FCAPS

ASMi-54L Ver. 2.5 – 2010 Slide 32

RADview-EMSFCAPS

● Manage Event Log parameters

● Manage the way Events are displayed in the Event Browser

● Manage system response upon occurrence of specific Events.

● Trap Synchronization upon connection failure between RADview-EMS to NE (*supported devices only)

● Modify – Mask, Severity, Duplication, Forwarding, Threshold, Clearing, Formatting

● Manage Event Log parameters

● Manage the way Events are displayed in the Event Browser

● Manage system response upon occurrence of specific Events.

● Trap Synchronization upon connection failure between RADview-EMS to NE (*supported devices only)

● Modify – Mask, Severity, Duplication, Forwarding, Threshold, Clearing, Formatting

Fault Configuration Administration Performance Security

ASMi-54L Ver. 2.5 – 2010 Slide 33

RADview-EMSFCAPS

● Realistic representation of the devices (shelf-view)

● Tracks configuration changes

● Configures, installs, and distributes software and configuration files across the network

● Viewing and/or modifying configuration (system, ports, and alarms)

● Enables viewing the diagnostics and status information

● Realistic representation of the devices (shelf-view)

● Tracks configuration changes

● Configures, installs, and distributes software and configuration files across the network

● Viewing and/or modifying configuration (system, ports, and alarms)

● Enables viewing the diagnostics and status information

Fault Administration Performance SecurityConfiguration

Shelf-ViewShelf-ViewWebWeb

ASMi-54L Ver. 2.5 – 2010 Slide 34

RADview-EMSFCAPS

● Audit trails for Security, System and Applications activities

● Tracks and log the shelf-view user activity

● Create and manage user accounts and groups

● Manage various server setting

● Audit trails for Security, System and Applications activities

● Tracks and log the shelf-view user activity

● Create and manage user accounts and groups

● Manage various server setting

AdministrationConfigurationFault Performance Security

Security logsSecurity logs Applications activitiesApplications activities

ASMi-54L Ver. 2.5 – 2010 Slide 35

RADview-EMSFCAPS

● Monitors network performance (QoS, CoS)

● Current statistics (Real-time)

● Intervals statistics

● Reflects Agent statistics

● RADview statistics collector (*supported devices only)

– Collect and compress the data

– Retrieved lost data upon connection failure

– Minimizing management traffic

– Exports CSV ASCII files for OSS

● Monitors network performance (QoS, CoS)

● Current statistics (Real-time)

● Intervals statistics

● Reflects Agent statistics

● RADview statistics collector (*supported devices only)

– Collect and compress the data

– Retrieved lost data upon connection failure

– Minimizing management traffic

– Exports CSV ASCII files for OSS

PerformanceConfiguration AdministrationFault Security

StatisticsStatistics

ASMi-54L Ver. 2.5 – 2010 Slide 36

RADview-EMSFCAPS

● View and manage EMS Security profiles in a graphical interface.

● Create and edit security profiles.

● Create Common/Private view profiles per user/group

● Collects accounting data and generates network usage reports

● Define password policies

● View and manage EMS Security profiles in a graphical interface.

● Create and edit security profiles.

● Create Common/Private view profiles per user/group

● Collects accounting data and generates network usage reports

● Define password policies

SecurityConfiguration Administration PerformanceFault

Security profilesSecurity profilesPassword policyPassword policy

ASMi-54L Ver. 2.5 – 2010 Slide 37

Device Management

• RAD products support the following management capabilities

ASMi-54L Ver. 2.5 – 2010 Slide 38

Sales Tools

• Web Sites

• Brochures

ASMi-54L Ver. 2.5 – 2010 Slide 39

Sales Tools cont…• Case Studies

• Application Notes:

ASMi-54L Ver. 2.5 – 2010 Slide 40

Sales Tools cont…

• Video

• Calculators

ASMi-54L Ver. 2.5 – 2010 Slide 41

Summary

• Higher rates enable us more opportunities for more applications in the market

• Improving Ethernet capabilities such as OAM or Ethernet port limitations enable the service provider better utilization

• Cost-effective solution together with complete solution from the central side enable one single management and reduce OpEx/CapEx dramatically

ASMi-54L Ver. 2.5 – 2010 Slide 42

Thank You For Your Attention

www.rad.com

Documents

ASMi-54L v.2.67 GA