12
SS-GASPT www.goodmanmfg.com 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications • Direct drive, multi-speed ECM blower motor • All-aluminum evaporator coil • Coil mounting track for quick repositioning • Optimized for use with R-410A refrigerant • Cabinet air leakage less than 2.0% at 1.0 inch H2O when tested in accordance with ASHRAE standard 193 • Cabinet air leakage less than 1.4% at 0.5 inch H2O when tested in accordance with ASHRAE standard 193 • 3 kW – 25 kW electric heater kits • Horizontal or vertical conÀguration capabilities • Rigid SmartFrame cabinet • 21" depth for easier attic access • DecaBDE-free thermoplastic drain pan with secondary drain connections • Screw-less sides and back helps to reduce condensation when installed in humid locations • Foil-faced insulation covers the internal casing to reduce cabinet condensation *alvanized, leather grain-embossed Ànish • Glue-less cabinet insulation retention 7 ool-less Àlter access • AHRI certiÀed E7/ listed * Complete warranty details available from your local dealer or at www.goodmanmfg.com. To receive the 10-<ear 3arts /imited Warranty, online registration must be completed within 0 days of installation. Online registration is not required in California or Quebec. ASPT S ERIES MULTI-POSITION, INTERNAL TXV MULTI-SPEED ECM BASED AIR HANDLER TO 5 TONS Contents Air Handler Nomenclature .............................. 2 Heater Kit Nomenclature ................................ 2 3roduct SpeciÀcations ..................................... 3 Dimensions ...................................................... 4 AirÁow Data ..................................................... 5 Heat Kit Data ................................................... Wiring Diagram................................................ 8 Accessories ..................................................... 11

ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

SS-GASPT www.goodmanmfg.com 6/14Supersedes 4/14

Product Features• Internal factory-installed thermal expansion

valves for cooling and heat pump applications• Direct drive, multi-speed ECM blower motor• All-aluminum evaporator coil• Coil mounting track for quick repositioning• Optimized for use with R-410A refrigerant• Cabinet air leakage less than 2.0%

at 1.0 inch H2O when tested in accordance with ASHRAE standard 193

• Cabinet air leakage less than 1.4% at 0.5 inch H2O when tested in accordance with ASHRAE standard 193

• 3 kW – 25 kW electric heater kits• Horizontal or vertical con guration

capabilities• Rigid SmartFrame™ cabinet• 21" depth for easier attic access• DecaBDE-free thermoplastic drain

pan with secondary drain connections• Screw-less sides and back helps to

reduce condensation when installed in humid locations

• Foil-faced insulation covers the internal casing to reduce cabinet condensation

• alvanized, leather grain-embossed nish• Glue-less cabinet insulation retention • ool-less lter access• AHRI certi ed E listed

* Complete warranty details available from your local dealer or at www.goodmanmfg.com. To receive the 10- ear arts imited Warranty, online registration must be completed within 0 days of installation. Online registration is not required in California or Quebec.

ASPT SERIESMULTI-POSITION, INTERNAL TXV

MULTI-SPEED ECM BASED

AIR HANDLER

1½ TO 5 TONS

ContentsAir Handler Nomenclature ..............................2Heater Kit Nomenclature ................................2

roduct Speci cations .....................................3Dimensions ......................................................4Air ow Data .....................................................5Heat Kit Data ...................................................Wiring Diagram ................................................8Accessories ..................................................... 11

Page 2: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

PRODUCT SPECIFICATIONS

2 www.goodmanmfg.com SS-GASPT

NOMENCLATURE

HEATING KW CORRECTION FACTOR

240 230 220 210 208

1.00 0.92 0.84 0.77 0.75

Multiply the 240-volt heating capacity by correction factors.

Page 3: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

PRODUCT SPECIFICATIONS

SS-GASPT www.goodmanmfg.com 3

SPECIFICATIONS

ASPT24B14*

ASPT30C14*

ASPT36C14*

ASPT42C14*

ASPT42D14*

ASPT48C14*

ASPT48D14*

ASPT60D14*

Cooling (Btu/h) 24,000 30,000 36,000 42,000 42,000 48,000 48,000 60,000

i o t C

B

i t 9½" 10 " 10 " 10 " 10 " 10 " 10 " 11 "

Width 6" 8" 8" 10 " 10 " 10 " 10 " 10 "

C CLiquid " " " " " " " "

u on ¾" " " " " " " "

Coil in Conn t ( ) ¾" ¾" ¾" ¾" ¾" ¾" ¾" ¾"

D

olt g 208 / 230 208 / 230 208 / 230 208 / 230 208 / 230 208 / 230 208 / 230 208 / 230

ini u Ci uit it 3 / 3 4 / 4 4 / 4 4 / 4 6 / 6 7 / 7 8 / 8 8 / 8

. u nt i ( ) 15 / 15 15 / 15 15 / 15 15 / 15 15 / 15 15/15 15 / 15 15 / 15

ini u C 197 197 197 197 197 197 197 197

i u C 253 253 253 253 253 253 253 253

B

ull Lo d ( L ) 2.18 3.15 3.15 3.15 4.84 5.4 6.65 6.65

o o ( ) ¾ ¾ ¾ ¾ ¾ ¾ 1 1

S 100 118 118 125 167 125 167 167

ini u Ci uit it ( C ) nd i u u nt ot on ( ) o lo ithout u l nt l h t in t ll d. to unit n l t nd/o t it t o i on ith o d o h t in t ll d.

Page 4: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

PRODUCT SPECIFICATIONS

4 www.goodmanmfg.com SS-GASPT

DIMENSIONS

CB

.55"(1.40 cm)

.55"(1.40 cm)

2.17"(5.51cm)

DE

21"

9.21"

11.3"(28.70 cm)

.55"(1.40 cm)

A

FINLET

(FRONT VIEW)

1"(2.54 cm)

.55"(1.40 cm)

19.5" (49.5 cm)INLET

(RIGHT SIDE VIEW)

1.73"(4.39 cm)

1.73"(4.39 cm)

1.45"(3.68 cm)

3.08"(7.82 cm)

1.63"(4.13 cm)

2.91"(7.39 cm)

2.93"(7.44 cm)

G

H

4.50"(11.43 cm)

1.4"(3.6 cm)

3.1"(7.9 cm)

5.2"(13.3 cm)

7.5"(19.1 cm)

1.8"(4.6 cm)

PLASTICBREAKER

COVER

LOGO LOCATION

SEE DRAIN PORT DETAIL

LIQUID LINESUCTION TUBE

INLETTUBE

DRAIN PORT DETAIL

A" B" C" D" E" " G" H"

24B14 45 16 17½ 18 15 14¼ 8 12

30C14 49 20 21 20 17 17¾ 10½ 12

36C14 49 20 21 20 17 17¾ 10½ 12

42C14 49 20 21 20 17 17¾ 10½ 12

42 14 58 23 24½ 28¾ 25¾ 21¼ 12 12

48C14 49 20 21 20 17 17¾ 10½ 12

48 14 58 23 24½ 28¾ 25¾ 21¼ 12 12

60 14 58 23 24½ 28¾ 25¾ 21¼ 12 12

Page 5: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

PRODUCT SPECIFICATIONS

SS-GASPT www.goodmanmfg.com 5

AIRFLOW DATA

ST

S P

0 1 0 2 0 3 0 4 0 0 6 0 0 8 0 1 0

24B14

1 570 540 520 480 450 415 370 305 270 2402 650 605 600 570 530 500 460 425 380 3303 740 690 660 650 615 570 525 480 440 4054 855 810 775 755 750 720 690 650 620 5755 1,050 1,005 975 940 910 900 885 880 845 820

30C14

1 610 580 540 445 390 330 285 240 205 1602 705 670 625 570 545 465 425 385 325 2703 785 740 720 660 640 580 515 475 440 3704 880 845 810 805 740 700 660 595 550 5155 1,450 1,440 1,400 1,380 1,350 1,330 1,295 1,275 1,245 1,205

36C14

1 960 905 890 810 760 720 665 620 550 4852 1,060 1,010 995 920 875 835 790 745 690 6153 1,150 1,100 1,090 1,025 990 945 905 860 810 7504 1,250 1,220 1,205 1,145 1,110 1,070 1,035 990 940 8855 1,470 1,440 1,425 1,405 1,375 1,260 1,315 1,280 1,245 1,205

42C14

1 950 925 865 815 730 675 660 600 545 ---2 1,075 1,025 980 930 875 785 730 690 650 ---3 1,160 1,115 1,070 1,025 975 905 815 770 715 ---4 1,275 1,235 1,190 1,145 1,100 1,040 975 875 835 ---5 1,600 1,560 1,520 1,480 1,430 1,390 1,345 1,290 1,245 ---

42 14

1 1,230 1,180 1,110 1,060 1,000 945 885 810 745 6852 1,365 1,310 1,250 1,190 1,140 1,090 1,030 980 920 8553 1,460 1,410 1,355 1,305 1,255 1,210 1,155 1,115 1,060 1,0104 1,545 1,490 1,440 1,375 1,330 1,295 1,245 1,200 1,150 1,1005 1,865 1,825 1,780 1,745 1,695 1,645 1,610 1,570 1,520 1,475

48C14

1 1,365 1,305 1,275 1,225 1,175 1,110 1,070 1,020 995 ---2 1,490 1,455 1,405 1,360 1,305 1,255 1,205 1,160 1,115 ---3 1,580 1,540 1,500 1,455 1,400 1,350 1,300 1,260 1,210 ---4 1,670 1,635 1,585 1,545 1,495 1,445 1,395 1,365 1,315 ---5 1,750 1,715 1,680 1,645 1,590 1,530 1,495 1,460 1,410 ---

48 14

1 1,485 1,425 1,400 1,325 1,270 1,220 1,165 1,115 1,080 1,0052 1,560 1,510 1,490 1,425 1,385 1,335 1,295 1,250 1,205 1,1553 1,675 1,625 1,600 1,530 1,485 1,435 1,390 1,345 1,295 1,2454 1,820 1,770 1,745 1,685 1,640 1,595 1,555 1,510 1,470 1,4205 2,225 2,180 2,160 2,085 2,060 2,010 1,970 1,930 1,895 1,850

60 14

1 1,485 1,425 1,400 1,325 1,270 1,220 1,165 1,115 1,080 1,0052 1,675 1,625 1,600 1,530 1,485 1,435 1,390 1,345 1,295 1,2453 1,820 1,770 1,745 1,685 1,640 1,595 1,555 1,510 1,470 1,4204 2,060 2,010 1,995 1,925 1,880 1,845 1,800 1,760 1,720 1,6805 2,225 2,180 2,160 2,085 2,060 2,010 1,970 1,930 1,895 1,850

• h h t i o in o on onl . o to o on, t n l t u u t not d lu ho n on ng l t . • th C d u t nt to o .98 o ho i ont l l , .95 o ho i ont l ight .96 o do n o o i nt on .• u d oil ith lt in l .• ll od l hi d o th to ith th d t t on 4.

Page 6: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

PRODUCT SPECIFICATIONS

6 www.goodmanmfg.com SS-GASPT

HEAT KIT DATA

C 1 C 2 S PA CA P A CA P CA P

ASPT24B14AC 0 / 0 3/3 15 / 15 --- --- --- --- ---03 C 10.8 / 12.5 17 / 19 20 / 20 --- --- --- -- --05 C 17.3 / 20.0 25 / 28 25 / 30 --- --- --- -- --06 C 21.7 / 25.0 30 / 34 35 / 35 --- --- --- -- --08 C 28.9 / 33.3 39 / 45 40 / 45 --- --- --- -- --10 C 34.7 / 40.0 46 / 53 50 / 60 --- --- --- -- --

C15 34.7 / 40.0 46 / 53 50 / 60 17.3 / 20 22 / 25 25 / 25 68 / 78 70 / 80

ASPT30C14AB 0 / 0 3.9 / 3.9 15 / 15 --- --- --- -- --03 C 10.8 / 12.5 17 / 20 20 / 20 --- --- --- -- --05 C 17.3 / 20.0 26 / 29 30 / 30 --- --- --- -- --06 C 21.7 / 25.0 31 / 35 35 / 40 --- --- --- -- --08 C 28.9 / 33.3 40 / 46 40 / 50 --- --- --- -- --10 C 34.7 / 40.0 47 / 54 50 / 60 --- --- --- -- --

C15 34.7 / 40.0 47 / 54 50 / 60 17.3 / 20 22 / 25 25 / 25 69 / 79 70 / 80

ASPT36C14AC 0 / 0 4/4 15 / 15 --- --- --- -- --03 C 10.8 / 12.5 17 / 20 20 / 20 --- --- --- -- --05 C 17.3 / 20.0 26 / 29 30 / 30 --- --- --- -- --06 C 21.7 / 25.0 31 / 35 40 / 40 --- --- --- -- --08 C 28.9 / 33.3 40 / 46 40 / 50 --- --- --- -- --10 C 34.7 / 40.0 47 / 54 50 / 60 --- --- --- -- --15 0/0 4/4 15/15 30/34.6 38/43 40/45 -- --20 0/0 4/4 15/15 38/43 47/54 50/60 -- --

C15 34.7 / 40.0 47 / 54 50 / 60 17.3 / 20 22 / 25 25 / 25 69 / 79 70 / 80 C19 34.7 / 40.0 47 / 54 50 / 60 34.7 / 40 43 / 50 45 / 50 91 / 104 100 / 110 C15 0/0 4/4 15/15 30/34.6 38/43 40/45 -- --C20 0/0 4/4 15/15 38/43 47/54 50/60 -- --

ASPT42C14A 0 / 0 4/4 15 / 15 --- --- --- -- --03 C 10.8 / 12.5 17 / 20 20 / 20 --- --- --- -- --05 C 17.3 / 20.0 26 / 29 30 / 30 --- --- --- -- --06 C 21.7 / 25.0 31 / 35 35 / 40 --- --- --- -- --08 C 28.9 / 33.3 40 / 46 40 / 50 --- --- --- -- --10 C 34.7 / 40.0 47 / 54 50 / 60 --- --- --- -- --15 0/0 4/4 15/15 30/34.6 38/43 40/45 -- --20 0/0 4/4 15/15 38/43 47/54 50/60 -- --

C15 34.7 / 40.0 47 / 54 50 / 60 17.3 / 20 22 / 25 25 / 25 69 / 79 70 / 80 C19 34.3 / 40.0 47 / 54 50 / 60 34.7 / 40 43 / 50 45 / 50 91 / 104 100 / 110 C15 0/0 4/4 15/15 30 / 34.6 38 / 43 40 / 45 -- --C20 0/0 4/4 15/15 38 / 43 47 / 54 50 / 60 -- --

ASPT48C14AD 0 / 0 7 / 7 15 / 15 --- --- --- -- --03 C 10.8 / 12.5 20 / 22 25 / 25 --- --- --- -- --05 C 17.3 / 20.0 28 / 32 30 / 35 --- --- --- -- --06 C 21.7 / 25.0 34 / 38 35 / 40 --- --- --- -- --08 C 28.9 / 33.3 43 / 48 45 / 50 --- --- --- -- --10 C 34.7 / 40.0 50 / 57 60 / 60 --- --- --- -- --15 0/0 8/8 15/15 30/34.6 38/44 40/45 -- --20 0/0 8/8 15/15 38/43 47/54 50/60 -- --

C15 34.7 / 40.0 50 / 57 60 / 60 17.3 / 20 22 / 25 25 / 25 72 / 82 80 / 90C19 34.3 / 40.0 50 / 57 60 / 60 34.7 / 40 43 / 50 45 / 50 93 / 107 100 / 110 C15 0/0 4 / 4 15 / 15 30 / 34.6 38 / 43 40 / 45 -- --C20 0/0 4 / 4 15 / 15 37 / 43 47 / 54 50 / 60 -- --

Page 7: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

PRODUCT SPECIFICATIONS

SS-GASPT www.goodmanmfg.com 7

HEAT KIT DATA (CONT.)

All ampacities noted above include air handler motor amps Circuit 1: Single-phase for Air Handlers / Circuit 2: Three-phase for HKR3 Heater Kits ¹ Minimum Circuit Ampacity (Heater Amps + Motor Amps) X 1.25 ² Maximum Overcurrent Protection = 2.25 X Motor Amps + Heater Amps * Revision level that may or may not be designated

C = Circuit Breaker Option --- indicates Not Required HKA meets the new 1995 requirements for 15 and 20KW heaters • Only applicable when HKA kits are included in table • MBVC and MBR models

C 1 C 2 S PA CA P A CA P CA P

ASPT42D14AC 0 / 0 6/6 15 / 15 --- --- --- -- --03 C 10.8 / 12.5 20 / 22 20 / 25 --- --- --- -- --05 C 17.3 / 20.0 28 / 31 30 / 35 --- --- --- -- --06 C 21.7 / 25.0 33 / 37 35 / 40 --- --- --- -- --08 C 28.9 / 33.3 42 / 48 45 / 50 --- --- --- -- --10 C 34.7 / 40.0 49 / 56 50 / 60 --- --- --- -- --15 0/0 6/6 15/15 30/34.6 38/43 40/45 -- --20 0/0 6/6 15/15 38/43 47/54 50/60 -- --

C15 34.7 / 40.0 49 / 56 50 / 60 17.3 / 20 22 / 25 25 / 25 71 / 81 80 / 90 C20 34.3 / 39.6 49 / 56 50 / 60 34.7 / 40 43 / 50 45 / 50 93 / 106 100 / 110 C15 0/0 6/6 15/15 30 / 34.6 38 / 43 40 / 45 -- --C20 0/0 6/6 15/15 38 / 43 47 / 54 50 / 60 -- --

ASPT48D14AD 0 / 0 8/8 15 / 15 --- --- --- -- --03 C 10.8 / 12.5 22 / 24 25 / 25 --- --- --- -- --05 C 17.3 / 20.0 30 / 33 30 / 35 --- --- --- -- --06 C 21.7 / 25.0 35.4 / 40 40 / 40 --- --- --- -- --08 C 28.9 / 33.3 44 / 50 45 / 50 --- --- --- -- --10 C 34.7 / 40.0 52 / 58 60 / 60 --- --- --- -- --15 0/0 8/8 15/15 30/34.6 38/43 40/45 -- --20 0/0 8/8 15/15 38/43 47/54 50/60 -- --

C15 34.7 / 40.0 52 / 58 60 / 60 17.3 / 20 22 / 25 25 / 25 73 / 83 80 / 90 C20 34.3 / 39.6 52 / 58 60 / 60 34.7 / 40 43 / 50 45 / 50 95 / 108 100 / 110 C15 0/0 8/8 15/15 30/34.6 38/43 40/45 -- --C20 0/0 8/8 15/15 38/43 47/54 50/60 -- --C25 52 / 60 73 / 83 80 / 90 34.7 / 40 43 / 50 45 / 50 117 / 133 125 / 150

ASPT60D14AC 0 / 0 8.3 / 8.3 15 / 15 --- --- --- -- --03 C 10.8 / 12.5 22 / 24 25 / 25 --- --- --- -- --05 C 17.3 / 20.0 30 / 33 30 / 35 --- --- --- -- --06 C 21.7 / 25.0 35.4 / 40 40 / 40 --- --- --- -- --08 C 28.9 / 33.3 44 / 50 45 / 50 --- --- --- -- --10 C 34.7 / 40.0 52 / 58 60 / 60 --- --- --- -- --15 0/0 8.3 / 8.3 15/15 30/34.6 38/43 40/45 -- --20 0/0 8.3 / 8.3 15/15 38/43 47/54 50/60 -- --

C15 34.7 / 40.0 52 / 58 60 / 60 17.3 / 20 22 / 25 25 / 25 73 / 83 80 / 90 C20 34.3 / 39.6 52 / 58 60 / 60 34.7 / 40 43 / 50 45 / 50 95 / 108 100 / 110 C15 0/0 8.3 / 8.3 15/15 30/34.6 38/43 40/45 -- --C20 0/0 8.3 / 8.3 15/15 38/43 47/54 50/60 -- --C25 52 / 60 73 / 83 80 / 90 34.7 / 40 43 / 50 45 / 50 117 / 133 125 / 150

Page 8: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

PRODUCT SPECIFICATIONS

8 www.goodmanmfg.com SS-GASPT

Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.

WARNINGHigh Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death.

BK

BL

BK

L1L2

BK

BK

HTR

1TL

HT

R1

RD

987

R

WH

BLPU

TL

BK

5 63 4PLF

BK

RD

1 2

WH

RD

L2L1

BK

BK

RD

BKR

D

RHT

R2

TL

L1

BK

6 8 972

RD

PU

4 53

BK

RD

1PLF

BK

L2L1

L2

RD

YL

M1

M2

BK

RD

YL

RD

R1

M4

RD

BK

M3

HTR

3TL

HTR

2

HTR

1TL TL

PU

M2

R2

YL

M1

BL

WH

BR

BL

RD

BK RD

BK

TLH

TR1

BKHTR

4

HTR

3

HTR

2

BKR

D

97 8

L2L1

L1L2

2 5 63 4PLF

1

RD

M1

YL

BK

M2

BL

WH

6

BL

RD

BK

YL

8 97

M6

M5

M3 R

1

M4

RD

PU

M7 R2

M8BL

TL TL

TL YL

BL

RDBK

RD BL B

R

4 532

BK

PLF

1

ON

E (1

) ELE

MEN

T R

OW

STW

O (2

) ELE

MEN

T R

OW

STH

RE

E (3

) ELE

ME

NT

RO

WS

FOU

R (4

) ELE

MEN

T R

OW

S

FL

M1

M2

FL FL

M1

M2

M3

M4

FL FL FL

FL FL FL

FL

CO

PP

ER

PO

WE

R S

UP

PLY

(US

E R

ATIN

G P

LATE

)U

SE

MIN

. 75°

C F

IELD

WIR

E

0140

A00

063-

B

PLMPLF TRFA

CTO

RY

WIR

ING

FIE

LD W

IRIN

G

NO

TES

:

1) R

ED W

IRE

S T

O B

E O

N T

RAN

SFO

RM

ER T

ER

MIN

AL

"3" F

OR

240

VO

LTS

AN

D O

NTE

RM

INA

L "2

" FO

R 2

08 V

OLT

S.

2) S

EE

CO

MP

LETE

WIR

ING

DIA

GR

AMS

IN IN

STA

LLA

TIO

N IN

STR

UC

TIO

NS

FO

RPR

OP

ER L

OW

VO

LTAG

E W

IRIN

G C

ON

NE

CTI

ON

S.

3) C

ON

FIR

M S

PE

ED

TA

P S

ELE

CTI

ON

IS A

PPR

OPR

IATE

FO

R A

PPL

ICA

TIO

N. I

FS

PEE

D T

AP

NE

ED

S T

O B

E C

HA

NG

ED

, CO

NN

EC

T P

UR

PLE

WIR

E F

RO

M T

ERM

INA

L 4

OF

CR

RE

LAY

TO

AP

PR

OP

RIA

TE T

AP

AT

TB4)

BR

OW

N A

ND

WH

ITE

WIR

ES

AR

E U

SE

D F

OR

HE

AT K

ITS

ON

LY.

5) F

USE

: 3A

, 250

V, 3

AG

CAR

TRID

GE

FU

SE

.

RE

LAY

EVA

PO

RAT

OR

MO

TOR

TER

MIN

AL

BO

ARD

REM TB

BK

RD

BL

YL

BLU

E

BLA

CK

RE

DY

ELLO

W

CO

MP

ON

EN

T C

OD

E

BRO

WN

PUR

PLE

GR

EE

NPU BRG

R

FEM

ALE

PLU

G C

ON

NE

CTO

RM

ALE

PLU

G C

ON

NE

CTO

R

TRA

NS

FOR

ME

R

H

IGH

VO

LTA

GE

LO

W V

OLT

AGE

H

IGH

VO

LTA

GE

LO

W V

OLT

AGE

PLF

2

CO

LOR

CO

DE

TR

65

PLM

4

424

V5

12

3

EM

WIR

ING

CO

DE

208/

240

VO

LTS

11P

LF

PLM

L1

PLM

2L2

IF R

EP

LAC

EMEN

T O

F TH

E O

RIG

INA

L W

IRE

SSU

PP

LIE

D W

ITH

TH

IS A

SS

EM

BLY

IS N

EC

ES

SAR

Y,

US

E W

IRE

TH

AT C

ON

FOR

MS

TO

TH

E N

ATIO

NA

LE

LEC

TRIC

CO

DE

.

FLFU

SE

LIN

K

TLTH

ER

MA

L LI

MIT

HTR

HE

AT

ELE

ME

NTS

CR

CO

NTR

OL

RE

LAY

NO

TE: W

HEN

INS

TALL

ING

HEA

TER

KIT

, EN

SUR

E SP

EED

TAP

DO

ES

NO

T EX

CE

ED M

INIM

UM

BLO

WE

R S

PEE

D (M

BS) S

PEC

IFIE

D F

OR

TH

E AI

RH

AN

DLE

R/H

EAT

ER K

IT C

OM

BIN

ATI

ON

ON

TH

ISU

NIT

'S S

&R

PLA

TE. A

FTER

INS

TALL

ING

OP

TIO

NA

L H

EAT

KIT

, MA

RK

A "X

" IN

TH

E B

OX

PR

OV

IDED

ABO

VE.

MA

RK

AC

CO

RD

ING

TO

NU

MBE

R O

F H

EAT

ER E

LEM

ENT

RO

WS

INST

ALL

ED

. NO

MAR

KIN

DIC

ATE

S N

O H

EAT

KIT

INS

TALL

ED.

WH

ITE

WH

LG

N

W2

RW

1C

G4

Y1O

Y2

1D

H3

25

AB

1

C

EM

2 43 5

47

CR

FUS

EH

OLD

ER

(OP

TIO

NA

L)

1

SE

E N

OTE

1

US

E C

OPP

ER W

IRE

EQU

IPM

ENT

GR

OU

ND

BL

EM

YL

BL

5

BK

C

BK

PLF

BK1

RD2

3

240

24V

4

12

3

TR

RD

BLBR

45

WH6

78

9PL

M

GRD

12

34

56

78

9

AB17

4

CR

SEE

NO

TE 2

21

43

5 NC

GL

RD

PU

BL

BR WH

BL

RD

GR

RD

or B

K

BL

RD

BK

RD

W2

RW

1C

G4

Y1O

Y21

DH

32

5

RD

or B

K

PU

BR

WH

OR

WH

WH

BL

GR

RD

or B

K

BLFU

SE

HO

LDE

R(O

PTI

ON

AL)

L2L1

SE

E

NO

TE 1

SE

E

NO

TE 4

1354

2

ALT

ERN

ATE

HE

AT

RE

LAY

BL

PU

RD GR

WH

BL

13

24

CR

5

ALT

ERN

ATE

HE

AT

RE

LAY

WIRING DIAGRAM – AIR HANDLER

TE h l nt, 25 W h t it i not .

Page 9: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

PRODUCT SPECIFICATIONS

SS-GASPT www.goodmanmfg.com 9

M9

M10

TL

FLHTR1

HTR2

HTR3

HTR4

M6

M5

L2L2 L1

RD

BLBK

YL

RD

BK

BK

RD

M1 M3YL

BL

BK RD

M2

R1

M4

PU

9

8

WH

M8

7

6

BR 5

M7

R2

BLRD

BL 4

3

2

BL

YL

BK 1

PC

RD

BK

HTR5

L1L2L1

BL

R3

PU

PU

L2L1

CB4

CB3 CB1 CB2

WH

PU

TL

FLTL

FL

TL

FL

TL

FL

COLOR CODE

BK = BLACK BL = BLUE BR = BROWN

PK = PINK

RD = RED WH = WHITE YL = YELLOW

WIRING CODE:HIGH VOLTAGELOWVOLTAGE

COMPONENT CODE

PC = 9 PIN CONNECTOR HTR = HEATER ELEMENT TL = THERMAL LMT RS = RELAY/SEQUENCER TB = TERMINAL BLOCK CB = CIRCUIT BREAKER CC = CONTACTOR FL = FUSE LINK

TR = TRANSFORMERSR = STRAIN RELIEF

EM = EVAPORATOR MOTOREBTDR = ELEC. BLOWER TIME DELAYRC = RUN CAPACITOR

GR = GREEN OR = ORANGE

PU = PURPLE

0140M00274-A

NOTE: WHEN INSTALLING HEATER KIT, ENSURE SPEED TAP MUST EXCEED OREQUAL THE MINIMUM BLOWER SPEED (MBS) SPECIFIED FOR THE AIRHANDLER /HEATER KIT COMBINATION ON THIS UNIT'S SERIAL PLATE. AFTER INSTALLINGOPTIONAL HEAT KIT, MARK AN "X" IN THE PROVIDED BELOW.NO MARK INDICATES NO HEAT KIT INSTALLED.

FIVE (5) ELEMENT ROWS

NOTE:-THIS LABEL MUST BE ATTACHED ON THEAIRHANDLER IN A PROMINENT LOCATION

BK RD BKRD

WIRING DIAGRAM – 5 ELEMENT HEATER KIT

Page 10: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

PRODUCT SPECIFICATIONS

10 www.goodmanmfg.com SS-GASPT

RC

BR

BREM

3 5

2

1 4

RD

TR

WH

BR

BK

L2

L1

RD

RDBL

BK

PU

BLPU

RELAY/SEQUENCER

THERMAL LIMITTRANSFORMER

RUN CAPACITOR

ELEC. BLOWER TIME DELAY RELAYEVAPORATOR MOTORHEAT ELEMENTHTR

EBTDREM

RS

TLTR

RC

COMPONENT CODE

24 VOLT

TR

RC EM

EBTDR

EBTDR

COM

NONC

208/240 VOLTS

0140M00273-A

WH

BK

GND

L3 T3

CC

L2

L1

BL

T2

T1

R

BL

RD

BR

M3

M4PU

M2

PUWH

M1

WH

WH

RSBL

WH

PU

BL

RD

1

2

3

5

7

8

9

6

4

WH

PC

EBTDR

TERMINAL BLOCKCONTACTOR9-PIN CONNECTORPC

CCTB

M2

RS

M1

M3M4

L1 L2

LOW

HIGH

CC

HEATER CONTROL

AR POWER SUPPLY

1

2

3

4

5

6

7

8

9

PC

(CIRCUIT 1)

NCSPEEDUP

GR

C

RDXFMR-RXFMR-C

M1

COMK1

NOK1

L1

RDGR

PKBL

PU

SR

STRAIN RELIEF

M1

YL YELLOW

BK BLACKBL BLUEBR BROWNGR GREENOR ORANGEPK PINKPU PURPLERD REDWH WHITE

COLOR CODE

(CIRCUIT 2)HKR POWER SUPPLY

L1 L2 L3

FLSR

FUSE LINK

W2 W1

WBRGRBLPK

GRCRD

T1 T2 T3

1 2 3

4 5

FL HTR3 TL

FL HTR2 TL

FL HTR1 TL

TLFL HTR3 TLFL HTR2

TLFL HTR1

CB CIRCUIT BREAKER

L1L2L3

BKBK BK

BK

BK

BK

BK BK

BK

BKBK

BK

BKBK

BK

BK

BK

BK

BK

WIRING CODEHIGH VOLTAGELOW VOLTAGE

BK

NOTE: WHEN INSTALLING HEATER KIT, ENSURE SPEED TAP MUST EXCEED OR EQUAL THE MINIMUM BLOWER SPEED (MBS) SPECIFIED FOR THE AIRHANDLER/HEATER KIT COMBINATION ON THIS UNIT'S SERIAL PLATE.AFTER INSTALLING OPTIONAL HEAT KIT, MARK AN "X" IN THE PROVIDED BELOW.

NO MARK INDICATES NO HEAT KIT INSTALLED.

NOTE:-THIS LABEL MUST BEATTACHED ON THEAIRHANDLER IN A PROMINENTLOCATION

BK RD

TB

L1 L2

CIRCUIT 11 PH 208-240V

CIRCUIT 23 PH. 208-240V

WIRING DIAGRAM – 3 PHASE HEATER KIT

Page 11: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

PRODUCT SPECIFICATIONS

SS-GASPT www.goodmanmfg.com 11

ACCESSORIES

DOWNFLOW INSULATION KIT

D B D C D D

24B14 30C14 42 14

36C14 48 14

42C14 60 14

48C14

FILTERS

C P S

B L 16201 16.0 20.0

C L 1912201 19.5 20.0

D L 20231 23.0 20.0

Page 12: ASPT SERIES - Southern Pipe & Supply€¦ · SS-GASPT 6/14 Supersedes 4/14 Product Features • Internal factory-installed thermal expansion valves for cooling and heat pump applications

PRODUCT SPECIFICATIONS

12 www.goodmanmfg.com SS-GASPT

Goodman Manufacturing Company, .P., reserves the right to discontinue, or change at any time, speci cations or designs without notice or without incurring obligations. 2014 • Goodman Manufacturing Company, .P. • Houston, Texas • Printed in the SA.

NOTES