Audio-Technica Page 1

Audio-Technica Turntable & CartridgeNet Price List PROFESSIONAL USER ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Pro-Audio & Lighting Solutionswww.pro-technica.com BUY ONLINE at www.MusicWorld.bg

1,20

Aricles marked with PHO (phase out) will be discontinued soon!

E C Model DescriptionEURNetto

(ex. VAT)

EUR+ 20% DDS

(incl. VAT)

Turntables & Electronics

Y F AT-LP60USB

Get your classic albums off the shelf and into your MP3 playerAudio-Technica brings its legendary quality and audio fidelity to the digital realm with this LP-to-digital recording system. The AT-LP60-USB stereo turntable comes equipped with a USB output that allows direct connection to your computer. The system also offers: Mac- and PC-compatible Audacity software; an integral dual-magnet Audio-Technica phono cartridge; and a USB cable and adapter cables. The turntable also features a built-in switchable phono/line preamp that allows connection to a stereo system equipped with either a phono or line-level input. AT-LP60-USB turntable featuresUSB output—connects directly to your computer;Mac- and PC-compatible Audacity software digitizes your LPs; Fully automatic turntable operation with two speeds: 33 1/3, 45 RPM; Professional aluminum platterIncluded cables connect to your stereo or powered speakers; Integral Dual Magnet™ phono cartridge with replaceable stylus; Switchable built-in pre-amplifier with line-level RCA output cables

141,00 169,00 EUR

Y F AT-LP120USBC

USB Direct-Drive Professional Turntable. Professional stereo turntable features a high-torque direct-drive motor for quick start-ups and a USB output that connects directly to your computer. Other features include: forward and reverse play capability; cast aluminum platter with slip mat and a start/stop button; three speeds 33/45/78; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% or +/-20% adjustment ranges; and removable hinged dust cover. A selectable internal stereo phono pre-amplifier allows the turntable to plug directly to components with no dedicated turntable input. A USB cable and adapter cables are included along with Mac- and PC-compatible Audacity software to digitize your LPs. The AT-LP120USBC comes complete with the Audio-Technica AT95E cartridge and is also compatible with all Audio-Technica cartridges and any ½ inch mount cartridge from other manufacturers. Comes complete with the Audio-Technica AT95E cartridge. MAC and PC compatible. Audacity software for MAC & PC and all cables included!

246,00 295,00 EUR

Y F AT-LP1240USB

USB Direct-Drive Professional DJ Turntable. The AT-LP1240USB comes with numerous additional DJ-friendly features including a damped cast-aluminium platter with stroboscopic speed markings and slip mat, an illuminated speed indicator and adjustable pitch control, a dual start/stop button, a removable stylus target light, a dedicated tone arm grounding lug, a hydraulically-damped lift lever and a locking tone arm rest that keeps the arm and cartridge in place during transport. USB Function: A/D, D/A - 16 bit 44.1 kHz or 48 kHz USB selectable; Computer interface - USB 1.1 Compliant Windows XP or above or MAC OSX or above. ccessories Included: Slip mat; dust cover; platter; 45 RPM adapter; counterweight; headshell; power cord; USB cable; dual RCA (female) to 1/8” (3.5 mm) mini-plug (male) stereo adapter cable; dual RCA (female) to 1/8” (3.5 mm) mini-plug (female) stereo adapter cable; dual RCA (male) cable with integrated ground wire; stylus target light; Audacity software (CD)

488,00 586,00 EUR

Entry level Moving Magnet Cartridges

Y F AT91B / Blister

One of the most popular entry level cartridges available today. The AT91 features a conical stylus and robust housing for reliable, long lasting performance.

Recommended by industry professionals as the go-to cartridge for entry level systems and older record players alike, the AT91 is a truly versatile solution.Standard series phonograph cartridge. • Frequency Response: 20 - 20,000 Hz • Channel Seperation: 20 dB at 1kHz • Recommended Load Impedance: 47,000 ohms • Output: 3.5 mV • Stylus Shape: Conical • Mount: 1/2" • Replacement Stylus: ATN3600

22,40 27,00 EUR

Y F AT91B / Bulk

One of the most popular entry level cartridges available today. The AT91 features a conical stylus and robust housing for reliable, long lasting performance.

Recommended by industry professionals as the go-to cartridge for entry level systems and older record players alike, the AT91 is a truly versatile solution.Standard series phonograph cartridge. • Frequency Response: 20 - 20,000 Hz • Channel Seperation: 20 dB at 1kHz • Recommended Load Impedance: 47,000 ohms • Output: 3.5 mV • Stylus Shape: Conical • Mount: 1/2" • Replacement Stylus: ATN3600

17,50 21,00 EUR

Y F AT95EBL / Blister Standard series phonograph cartridge. • Frequency Response: 20 - 20,000 Hz • Channel Seperation: 20 dB at 1kHz • Recommended Load Impedance: 47,000 ohms • Output: 3.5 mV • Stylus Shape: Elliptical • Mount: 1/2" • Replacement Stylus: ATN95

36,00 44,00 EUR

Y F AT95E / Bulk

The AT95 provides outstanding overall performance for mid range systems due to its elliptical diamond stylus and dual magnet setup.

Featuring the same dual magnet design as Audio-Technica’s celebrated AT440MLa and AT150MLX cartridges, the AT95 has found popularity amongst entry to mid level enthusiasts for its excellent value for money. Standard series phonograph cartridge. • Frequency Response: 20 - 20,000 Hz • Channel Seperation: 20 dB at 1kHz • Recommended Load Impedance: 47,000 ohms • Output: 3.5 mV • Stylus Shape: Elliptical • Mount: 1/2" • Replacement Stylus: ATN95

29,40 35,00 EUR

Moving Magnet Cartridges

Y F AT100E

Standard series phonograph cartridge. Gold-plated connectors assure maximum energy transfer. Superior imaging and channel separation are achieved through the A-T Vector Aligned Dual Magnet design. •FREQUENCY RESPONSE 20-20,000 Hz • CHANNEL SEPARATION 27 (dB at 1 kHz) • VERTICAL TRACKING FORCE 1.0-1.8 grams (1.4 grams optimal) • RECOMM -ENDED LOAD IMPEDANCE 47(kƒ) • OUTPUT 4.5 (mV at 1 kHz, 5 cm/sec) • CHANNEL BALANCE 1.5 dB (1 kHz) • STYLUS SHAPE 0.3 x 0.7 mil jointed elliptical • MOUNT Half-inch • REPLACEMENT STYLUS ATN100E

64,00 77,00 EUR

Y F AT5V

Gold-plated connectors assure maximum energy transfer. Superior imaging and channel separation are achieved through the A-T Vector Aligned Dual Magnet design.AT5V cartridge is equipped with stainless still suspension wiresystem of AT150MLX cartridge and compliance adjustment screw.• VM type dual magnet system • High-performance para-toroïdal generator coil system • Gold plated connectors • PCOCC coil • Stainless still suspension wire improving sound quality and transient response • Conical polished diamond stylus for less critical tilt angle adjustment allowing more flexible use on various tonearms • Frequency Response: 20 to 20,000 Hz Channel Separation: 24 dB (1 kHz) • Channel Balance: 1.5 dB (1 kHz) • Vertical Tracking Angle: 23 degrees • Recommended Load Impedance: 47,000 W

92,00 110,00 EUR

Y F AT120EStandard series phonograph cartridge. • Frequency Response: 15-25,000 Hz • Channel Seperation: 25/20 (dB at 1 kHz/10 kHz) • Vertical Tracking Force: 1.0-1.8 grams • Stylus Construction: Nude round shank • Recommended Load Impedance: 47,000 ohms • Output: 5.0 (mV at 1 kHz, 5 cm/sec) • Channel Balance: 1.0 dB • Stylus Shape: 0.3 x 0.7 mil elliptical • Cantilever: Alloy tube • Mount: Half-inch • Replacement Stylus: ATN120E

111,00 133,00 EUR

Y F AT440MLa

MicroLine® shaped diamond tip for better high frequency response with less wear and distortion than elliptical or conventional linear contact styli. Dual Magnet cartridge design, Paratoroidal generator coil circuit, a Micro-Linear stylus, PCOCC wire. • Frequency Response: 20-20,000 Hz • Channel Seperation: 27 (dB at 1 kHz) • Stylus Construction: 0.12 mil Nude square Micro-Linear stylus • Recommended Load Impedance: 47,000 ohms • Output: 4.0 (mV, 1 kHz, 5 cm/sec) • Channel Balance: 0.8 (dB at 1 KHz) • Stylus Shape: MicroLine™ • Cantilever: Tapered alloy tube • Mount: Half-inch • Replacement Stylus: ATN440MLa • Tracking Force Range: 1.0-1.8 grams (1.4 optimal)

157,00 188,00 EUR

Y F AT-150MLX

A technologically advanced pure copper material is used in Audio-Technica’s exclusive “Para-toroïdal Signal Generator”. Gold-plated boron cantilever.MicroLine™ Stylus PCOCC Wire. Mu-metal shielding plate, Para-toroïdal generator coil circuit • Frequency Response: 10 to 30,000 Hz • Channel Separation: 30 dB (1 kHz)• Channel Balance: 0.8 dB (1 kHz) • Vertical Tracking Angle: 23 degrees • Recommended Load Impedance: 47,000 W • Coil Inductance: 360 mH (1 kHz) Weight: 8.3 g Accessories: Non magnetic screw driver; Anti-static stylus brush; Two 8 mm installation screws; Two 5 mm installation screws; Two hexagonal nuts; Two round nuts; Four washers; One set of PCOCC Lead Wires

277,00 332,00 EUR

Price List 04/2014Effective April 10, 2014

Subject to change without prior notice.All former price lists expire with the publishing of this version.

ll prices are suggested net retail prices; ex works.There are applicable our General Terms of Business, only.

EUR

Tel: (02) 978 20 25 (office)Fax: (02) 978 58 70Tel: (02) 95 15 690 (store) Please note all prices in the first column are without V.A.T.!!!

ProTechnica EOOD Iskarsko Shaussee 7

BG-1528 Sofia

Audio-Technica Page 2

E C Model DescriptionEURNetto

(ex. VAT)

EUR+ 20% DDS

(incl. VAT)

P and U mount Moving Magnet Cartridges

Y F AT3482P

P-mount MM cartridge, conical stylus. 0.6 mil conical stylus Carbon fiber cantilever Installation screw and nut supplied Bonded round shank diamond. • Type: Dual Magnet • Frequency Response: 20 to 20,000 Hz • Channel Separation: 24 dB / 15 dB (1 kHz/10 kHz) • Channel Balance: 1.5 dB (1 kHz) • Vertical Tracking Angle: 20 degree• Recommended Load Impedance: 47,000 W • Mount: P-mount only • Replacement Stylus: ATN3472P (aluminium cantilever) • Accessories: P-mount black installation screw and nut; plastic protector;

27,00 32,00 EUR

Y F AT300P

U-mount MM cartridge, conical stylus 0.6 mil conical stylus; Alloy tube cantilever; Universal adaptor and installation screw and nut supplied; Bonded round shank diamond. • Type: Dual Magnet • Frequency Response: 20 to 20,000 Hz • Channel Separation: 26 dB / 16 dB (1 kHz/10 kHz) • Channel Balance: 1.5 dB (1 kHz) • Vertical Tracking Angle: 20 degree • Recommended Load Impedance: 47,000 W • Coil Inductance: 400 mH (1 kHz) • Stylus Construction: Bonded Round Shank • Mount: P-mount & 1/2” mount • Replacement Stylus: ATN3472P • Accessories: P-mount black installation screw and nut; plastic protector; Universal 1/2” mount adaptor

31,70 38,00 EUR

Y F AT311EP

P-mount MM cartridge, elliptical stylus with universal adaptor 0.4 x 0.7 mil elliptical stylus; Alloy tube cantilever; Universal adaptor and installation screw and nut supplied; Bonded round shank diamond; • Type: Dual Magnet Frequency Response: 15 to 27,000 Hz • Channel Separation: 29 dB / 18 dB (1 kHz/10 kHz) • Channel Balance: 1.25 dB (1 kHz) • Vertical Tracking Angle: 20 degree • Recommended Load Impedance: 47,000 W • Stylus Construction: Bonded Round Shank • Mount: P-mount & 1/2” mount • Replacement Stylus: ATN3472SE • Accessories: P-mount black installation screw and nut; plastic protector; Universal 1/2” mount adaptor

41,00 49,00 EUR

Audiophile Moving Coil Cartridges

Y F AT-F7

The new Audio-Technica AT-F7 stereo cartridge features our celebrated dual coil design and elliptical stylus for class leading quality of sound and reliability. The elliptical stylus has two radii, the front radius being wider than the side radius. This allows the stylus to ride in the centre of the groove, while the smaller side radius can more accurately track higher frequencies. The dual coil design of the AT-F7 provides outstanding clarity and transparency of tone along with improved frequency response and precise stereo imaging. Finished in a stylish silver housing. • Type: Moving coil (MC) • Frequency response: 15 to 50,000 Hz • Output voltage: 0.35 mV (1 kHz, 5cm/sec.) • Channel separation: 27 dB (1 kHz) • Channel balance: 1.5 dB (1 kHz) • Tracking force: 1.8 to 2.2 g (standard: 2.0 g) • Coil impedance: 12 O (1 kHz) • DC resistance: 12 O • Recommended load impedance: Min. 100O (when head amplifier is connected) • Coil inductance: 25 µH (1 kHz) • Static compliance: 35 x 10 - 6 cm/dyne • Dynamic compliance: 9 x 10 - 6 cm/dyne (100 Hz) • Stylus: Nude elliptical stylus 0.2 x 1.7 mil • Suspension wires: Stainless • Vertical tracking angle: 23 degrees • Dimensions: 17.3 (H) x 16.8 (W) x 25.4 (L) mm • Weight: 5.0 g

220,00 264,00 EUR

Y F AT33EV

The original model of this stereo cartridge is the AT33ANV, which was available as a special release to celebrate our 45th anniversary. The A33ANV was the first in the AN33 series to feature a Duralumin cantilever, which received wide acclaim for its sound quality. Retaining the basic specification, we present a further improved and evolved model. • Type: MC-type • Playback frequency range: 15-50,000Hz • Output voltage: 0.3mV (1kHz and 3.54cm/sec.) • Channel separation: 30dB (1kHz) • Output balance: 0.5dB (1kHz) • Stylus pressure: 1.8-2.2g (2.0g standard) • Coil impedance: 10O (1kHz) • DC resistance: 10O • Load resistance: More than 100O (when head amp connected) • Coil inductance: 22µH (1kHz) • Static compliance: 40×10-6cm/dyne • Dynamic compliance: 10×10-6cm/dyne (100Hz) • Stylus needle shape: Oval (0.3×0.7mil) • Cantilever: Duralumin tapered pipe • Vertical tracking angle: 23° • Dimensions: H16×W16.6×D26.5mm • Weight: 6.9g • Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1

413,00 496,00 EUR

Y F AT33PTG/II

Advanced nude tapered boron and weight reductionHigh performance and long-life MicroLinear™ stylusMicroLinear™ (ML) is a specially polished line contact stylus. This has better high range performance than the conical or elliptical stylus due to its small curvature radius and realizes low distortion and expanding high range reproduction even when playing at the inner circumference of records. And the constancy of the line contact shape is one of its main features with an average product lifetime of around 1000 hours. • Type: Dual Moving Coil • Frequency Response: 15 to 50,000 Hz • Channel Separation: 30 dB (1 kHz) • Channel Balance: 0.5 dB (1 kHz) • Coil Impedance: 10 W (1 kHz) • DC Resistance: 10 W • Vertical Tracking Angle: 23 degrees • Recommended Load Impedance: Min 100 W

434,00 521,00 EUR

Y F AT-OC9/III

The AT-OC9/III replaces the critically acclaimed OC9MLII. Building on the enduring reputation of its predecessor, the AT-OC9/III features a special line contact stylus embedded into a low profile solid boron cantilever, ensuring the music signals read by the tip of the stylus are transmitted reliably to the coils. Type: Moving coil (MC) • Frequency response: 15 to 50,000 Hz • Output voltage: 0.4mV (1 kHz, 5 cm/sec.) • Channel separation: 30 dB (1 kHz) • Channel balance: 0.5 dB (1 kHz) • Tracking force: 1.8 to 2.2 g (standard: 2.0 g) • Coil impedance: 12O(1kHz) • DC resistance: 12 O • Recommended load impedance: Min. 100 O (when head amplifier is connected) • Coil inductance: 25µH (1 kHz) • Static compliance: 35 x 10 - 6 cm/dyne • Dynamic compliance: 18 x 10 - 6 cm/dyne (100 Hz) • Stylus: Line contact stylus (curvature radius: 40 x 7µm) • Cantilever: 0.26 mm diameter solid boron • Vertical tracking angle: 23 degrees Weight: 8.0 g

465,00 558,00 EUR

Y F AT-OC9ML/II

The AT-OC9ML/II Dual Moving MicroCoil™ cartridge is a significant achievement in precision manufacturing, with tolerances held to mere thousandths of an inch. Stringent quality control assures that these tolerances, as well as performance criteria, are maintained by every AT-OC9ML/II cartridge. In addition, the AT-OC9ML/II features: Dual-coil system for maximum channel separation. High-flux samarium cobalt magnet for improved electrical generation. PCOCC coil windings for low-loss “transparent” signal transmission. Gold-plated solid boron cantilever. MicroLine™ stylus. • Type: Dual Moving Coil • Frequency Response: 15 to 50,000 Hz • Channel Separation: 30 dB (1 kHz) • Channel Balance: 1.0 dB (1 kHz) • Coil Impedance: 12 W (1 kHz) • DC Resistance: 12 W • Vertical Tracking Angle: 23 degrees • Recommended Load Impedance: Min 100 W

399,00 478,00 EUR

Y F AT-OC9/III LTD

Limited edition pure titanium version of AT-OC9/III cartridge. Machined pure titanium base; Quad hybrid lead wire; Special line contact stylus and solid boron cantilever with a 0.26 mm diameter; Neodymium magnet and permendur yoke have drastically increased the magnetic energy; PCOCC used for coils and terminal pins; VC mold for minimizing unnecessary vibration. • Type: Dual Moving Coil • Frequency Response: 15 to 50,000 Hz • Channel Separation: 30 dB (1 kHz) • Channel Balance: 0.5 dB (1 kHz) • Coil Impedance: 12 W (1 kHz) • DC Resistance: 12 W • Vertical Tracking Angle: 23 degrees • Recommended Load Impedance: Min 100 W • Coil Inductance: 25 mH (1 kHz) Stylus Construction: Nude square shank • Mount: 1/2” centers • Dimensions: 17.3 (H) x 16.8 (W) x 25.7 (L) mm • Weight: 10.5 g • Accessories: Non magnetic screw driver; 1 brush; 2 washers; 2 x 12 mm mounting screws;2 x 18 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6106) (standard AT-OC9/III is delivered with AT6101)

599,00 719,00 EUR

Y F AT-ART7

Non magnetic core MC type developed based on commemorative model AT50ANV. Liquid crystal polymer armature; Newly designed magnetic circuit that maximizes magnetic energy; Special line contact stylus and solid boron cantilever with a 0.26 mm diameter; Machined aluminium base; Hybrid body that reduces unnecessary parasitic resonance. • Type: Non Magnetic Core Moving Coil • Frequency Response: 15 to 50,000 Hz • Channel Separation: 30 dB (1 kHz) • Channel Balance: 0.5 dB (1 kHz)• Coil Impedance: 12 W (1 kHz) • DC Resistance: 12 W • Vertical Tracking Angle: 23 degrees • Recommended Load Impedance: Min 100 W Stylus Construction: Nude square shank • Mount: 1/2” centers • Dimensions: 17.3 (H) x 17.0 (W) x 25.6 (L) mm • Weight: 8.5 g • Accessories: 1 non magnetic screw driver; 1 brush; 2 washers; 2 x 12 mm mounting screws; 2 Nuts; 2 x 18 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6106)

1.009,00 1.211,00 EUR

Y F AT-ART9

Audio-Technica’s flagship magnetic core MC type cartridge with very high quality magnetic circuit. Neodymium magnet and permendur yoke have drastically increased the magnetic energy, Hybrid body that reduces unnecessary parasitic resonance, Machined aluminium base, High-separation, wide-response dual moving coil, High-separation, wide-response dual moving coil, High-sound-quality brass mounting screws, PCOCC coil. • Type: Magnetic Core Moving Coil • Frequency Response: 15 to 50,000 Hz • Channel Separation: 30 dB (1 kHz) • Channel Balance: 0.5 dB (1 kHz) • Coil Impedance: 12 W (1 kHz) • DC Resistance: 12 W • Vertical Tracking Angle: 23 degrees • Recommended Load Impedance: Min 100 W • Coil Inductance: 25 mH (1 kHz)

1.000,00 1.200,00 EUR

Y F AT50ANV

Limited edition 50th anniversary celebration MC cartridge. Audio-Technica has been renowned for its phono cartridges for 50 years, and the moving-coil AT50ANV continues the company’s distinguished tradition. The limited-edition AT50ANV has a unique air-core design that employs a non-magnetic armature for the coil frame, yielding exquisite resolution of fine musical detail and a natural, transparent, spacious sound. Its new magnetic proprietary circuit design and neodymium magnets deliver almost twice the output of previous cartridges for extremely low noise and improved bass response. • Type: Non Magnetic Core Moving Coil • Frequency Response: 15 to 50,000 Hz • Channel Separation: 30 dB (1 kHz) • Channel Balance: 0.5 dB (1 kHz) • Coil Impedance: 11.5 W (1 kHz) • DC Resistance: 11.5 W • Vertical Tracking Angle: 23 degrees • Recommended Load Impedance: Min 100 W • Coil Inductance: 7 mH (1 kHz) • Stylus Construction: Nude square shank • Mount: 1/2” centers • Dimensions: 17.3 (H) x 17.0 (W) x 25.6 (L) mm • Weight: 10 g • Accessories: Non magnetic screw driver; 1 brush; 2 washers; 2 x 12 mm mounting screws; 2 x 18 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6106)

1.170,00 1.404,00 EUR

MC Matching Transformer

Y F AT2000T

The AT2000T is a step-up transformer that is the culmination of know-how from both the AT5000T, which was released to celebrate our 45th anniversary, and its improved follow-up, the AT3000T. • Frequency Response: 10Hz – 50 000Hz (± 3dB) • Gain: 24dB • Compatible MC cartridges : 2 to 20 ohms (standard phono input) • Recommended Load Impedance: 47k ohms • Channel Balance: Up to 0.5dB • Channel separation: Better than 85dB • Dimensions: H89×W140×D125mm • Weight: 1.2kg

1.198,00 1.438,00 EUR

Tel: (02) 978 20 25 (office)Fax: (02) 978 58 70Tel: (02) 95 15 690 (store) Please note all prices in the first column are without V.A.T.!!!

ProTechnica EOOD Iskarsko Shaussee 7

BG-1528 Sofia

Audio-Technica Page 3

E C Model DescriptionEURNetto

(ex. VAT)

EUR+ 20% DDS

(incl. VAT)

Mono Records Moving Coil Cartridges

Y F ATMONO3/SP

The Audio Technica AT-MONO 3/SP cartridge is special – redesigning not just the needle, but the whole cartridge specially for “shellac” or phonograph records. A high output moving coil cartridge of excellent production quality and wound with PCOCC coil for signal purity, it is designed to deliver excellent fidelity and superb clarity when playing 78 RPM mono records. With its high output of 1.2 mV, it can be used without additional pre-amplification or a MC transformer.Proven in use for many years in Japan, the Audio-Technica AT-MONO 3/SP cartridge in now available in Europe and helps to bring back the pure joy of discovery and listening pleasure for 78rpm record playing. • Type: Moving Coil, Mono 78 RPM Mono cartridge • Frequency response: 45 -7,000 Hz • Output voltage: 1.2 mV (1kHz and 5 cm/sec) • Tracking force: 3.0 - 7.0 g (5.0 g standard) • Recommended load: 40 ohms - 47K ohms (determine best value by listening) • Channel separation: Not applicable • Channel balance: Not applicable • Cantilever: Aluminum alloy • Stylus: Highly polished special conical 2.5 mil diamond • Dynamic compliance: 7.0 x 10-6 cm/dyne• Static compliance: 20.0 x 10-6 cm/dyne • External size: H16.0 x W16.6 x L26.5 mm • Weight: 6.8 g • Accessories included: Screwdriver, 4 screws, 2 washers and 2 nuts, spacer/weight, stylus brush

155,00 187,00 EUR

Y F AT-MONO3/LP

Made specifically for mono recordings on vinyl records, the cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove, the AT-MONO3/LP also has an adapted vertical compliance. Carefully selected component and state of the art technology produce a high resolution cartridge.Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability. The average usage time is 500 hours extending the life span of precious mono recording. High purity PCOCC allows a more transparent signal transmission offering a high efficiency and a high fidelity. To support the internal mechanism, the body is made of solid die-cast aluminium alloy, furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body. This model is not compatible with 78rpm SP records • Type: Moving Coil • Frequency Response: 20 to 20,000 Hz • Coil Impedance: 40 W (1 kHz) • DC Resistance: 40 W • Vertical Tracking Angle: 23 degrees • Recommended Load Impedance: 400 W to 47,000 W • Coil Inductance: 190 mH (1 kHz) Stylus Construction: 0.6 mil • Mount: 1/2” centers • Dimensions: 16.0 (H) x 16.6 (W) x 26.5 (L) mm • Weight: 6.8 g • Accessories: Non magnetic screw driver; 1 brush; 2 washers; 2 x 19 mm mounting screws; 2 x 13 mm mounting screws; 2 x nuts; 1 plastic protector; 1 set of PCOCC lead wires AT6101

155,00 187,00 EUR

Y F AT33MONO

The AT33Mono is made specifically for use on mono systems. It has a horizontal coil, and so in principle only generates electricity horizontally. The AT33Mono produces sound to a very high quality because it does not easily pick up unnecessary strain components from distorted or scratched records, producing audio that you couldn't possibly get from a stereo cartridge. The AT33Mono also has appropriate compliance in the vertical direction, so will not cause damage to stereo records. Enjoy those well-known classic mono records of yesteryear with the AT33Mono. Mono cartridge compatible with stereo playback systems. Strong body stabilized by a rigid body set-up. • Type: MC-type • Playback frequency range: 20-20,000Hz • Output voltage: 0.35mV (1kHz and 5cm/sec. horizontal signal) • Horizontal/vertical output ratio: 30dB (1kHz) • Output balance: 1.0dB (1kHz) • Stylus pressure: 2.3-2.7g (2.5g standard) • Coil impedance: 10O1kHz • DC resistance: 10O • Load resistance: More than 100O(when head amp connected) • Coil impedance: 28µH (1kHz) • Static compliance: 20×10-6cm/dyne • Dynamic compliance: 6×10-6cm/dyne (100Hz) • Needle shape: Round needle (0.65mil) • Cantilever: Duralumin pipe • Vertical tracking angle: 23° • Dimensions: H16×W16.6×D26.5mm • Weight: 6.9g • Accessories: Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fastening screw 13mm×2, 19mm×2, Nut x2, Brush x1, PCOCC lead set x1 *This model is not compatible with SP records.

275,00 330,00 EUR

Replacement styli

Y F ATN440MLA Replacement stylus for the AT440MLa dual magnet cartridge. 111,00 133,00 EUR

Y F ATN120E The ATN120E stylus is also compatible with AT120ET, AT120E/II cartridges 83,00 100,00 EUR

Y F ATN100E Replacement stylus for the AT100E moving magnet cartridge. 36,00 44,00 EUR

Y F ATN150MLXReplacement stylus for AT150MLX.The ATN150MLX stylus is compatible with AT150ANV cartridge.

204,00 245,00 EUR

Y F ATN91 Replacement stylus for the AT91 moving magnet cartridge. 14,90 18,00 EUR

Y F ATN95E Replacement stylus for the AT95 moving magnet cartridge. 22,40 27,00 EUR

Y F ATN3600L

This ATN3600L styli is compatible with the following cartridges:AT3600 - AT3600L - AT3601 - AT3651 - AT3650L - AT3650C - AT3650 - AT3626

This is also the replacement stylus for turntable models Audio-Technica LP60USB and LP60.

11,90 14,00 EUR

Y F ATN3472PReplacement conical stylus for AT300P, AT3482P and AT3482H/U

17,70 21,00 EUR

Y F ATN3472SE Replacement elliptical stylus for AT311EP and compatible with AT92ECD and AT301EP 27,00 32,00 EUR

Y F ATN5V Replacement stylus for AT5V cartridge with stainless tension wire 55,00 66,00 EUR

Y F ATP-N2Replacement stylus for ATP-2 cartridgeThe ATP-2 was included with AT-PL120 turntable from 2005 to 2010.The ATP-N2 is also compatible with ATP-2, ATP-1 and ATP-2XN cartridges.

64,00 77,00 EUR

Accessories

Y F AT607The AT607 stylus cleaning fluid extends both stylus and record life. The special cleaning formula dissolves dust and dirt known to hinder proper tracking. An applicator brush is attached to the cap for ease of use.

8,40 10,00 EUR

Y F RC-2Antistatic Record Spray Cleaner. Cleaning Fluid 200ml + Cleaning Cloth 21 x 28cm

7,60 9,00 EUR

Y F SC-5 Stylus Cleaner Kit. Contains: 1 x Antistatic Clean & Lubrican Fluid 15ml; 1 x Applicator Brush 1x Stylus Cleaning Brush 8,10 10,00 EUR

Y F AT615Precision Turntable Level. Leveling a turntable is essential to ensure proper performance. If your turntable isn’t level, its speed, tracking ability and tone-arm motion may be affected. The Audio-Technica AT615 machined aluminum turntable level is simple to use, allowing for quick and accurate measurements.

36,00 44,00 EUR

Y F AT618

Disc Stabilizer for Turntables. Improves sound quality. Holds record firmly in place. Works wonders with slightly warped records. For use with high torque turntables and with firm suspension. The AT618 is a useful accessory for music listeners, audio enthusiasts and DJs who require higher fidelity sound quality from their records. The AT618 stabilizer fits over the turntable spindle, sits on top of the record and applies 600 grams of weight, holding the record firmly in place while stabilizing the record and improving overall sound quality.

55,00 66,00 EUR

Y F RC-103 Stainless Record Stabilizer. Highness: 23mm; Weight: 450grams; Bottom Diameter: 70mm 37,20 45,00 EUR

Tel: (02) 978 20 25 (office)Fax: (02) 978 58 70Tel: (02) 95 15 690 (store) Please note all prices in the first column are without V.A.T.!!!

ProTechnica EOOD Iskarsko Shaussee 7

BG-1528 Sofia

Audio-Technica Page 4

E C Model DescriptionEURNetto

(ex. VAT)

EUR+ 20% DDS

(incl. VAT)

Y F AT-Ti15ANV

Machined pure titanium limited edition headshell. High rigidity pure titanium body reduces unnecessary vibration and help reproduce clear sound.Built-in damping material, HANENITE is high-damping rubber, which is excellent at absorbability such as shock or vibration, and transmits the record signals faithfully. Pressure bonded design using gold-plated lead tip, combining hybrid conductor, containing gold clad+7N-OFC+PCOCC+OFC with f0.18 mm 12-ply quad hybrid conductor.15g (excluding lead wire); 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm); 1 hexagon wrench (for overhanging and tilt adjustment)

231,00 277,00 EUR

Y F AT-LH18/OCCOCC Head Shell. Made from Audio-Technica's "technichard" space technology super hard material rated microdiamond pyramid hardness exceeds 400 Surface hardness achieve its ultra strong strength and light weight through "technichard" aluminum material, developed by NASA. Ideal head shell for its ultra light weight and durability. Mass: 18.0g Lead wire from Pure Copper by Ohno Continuous Casting process (Monocrystal condition high purity oxygen free copper)

83,00 100,00 EUR

Y F AT-LH15/OCCOCC Head Shell. Made from Audio-Technica's "technichard" space technology super hard material rated microdiamond pyramid hardness exceeds 400 Surface hardness achieve its ultra strong strength and light weight through "technichard" aluminum material, developed by NASA. Ideal head shell for its ultra light weight and durability. Mass: 15.0g Lead wire from Pure Copper by Ohno Continuous Casting process (Monocrystal condition high purity oxygen free copper)

83,00 100,00 EUR

Y F AT-LH13/OCCOCC Head Shell. Made from Audio-Technica's "technichard" space technology super hard material rated microdiamond pyramid hardness exceeds 400 Surface hardness achieve its ultra strong strength and light weight through "technichard" aluminum material, developed by NASA. Ideal head shell for its ultra light weight and durability. Mass: 13.0g Lead wire from Pure Copper by Ohno Continuous Casting process (Monocrystal condition high purity oxygen free copper)

83,00 100,00 EUR

Y F MG10Universal Headshell. Best match with most Vintage Tonearm, such as Audio Technica, SAEC, Denon, Fidelity Reaserch, Audiocraft, Sumiko, Koetsu, SME and many other. Mass: 10.0g Lead wire from Pure Copper

46,00 55,00 EUR

Y F AT-LT13A Universal Headshell. Headshell made of aluminum die cast body Made in Japan. Mass: 12.8g 31,70 38,00 EUR

Y F AT-HS1Universal Headshell suitable also for AT-LP120USBC and AT-LP1240 10g dj style 1/2”-mount cartridge headshell This headshell for 1/2”-mount cartridges and 4-pin turntable arm (Audio-Technica, Technics, SME) features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with colour-coded headshell lead wires and cartridge mounting screws, nuts and washer.

11,90 14,00 EUR

Y F HS-E5-W Universal Cartridge Head Shell with GOLD LEAD 7,80 9,00 EUR

Y F HS-E5-B Universal Cartridge Head Shell with GOLD LEAD 7,80 9,00 EUR

Y F HS-E1B Universal Cartridge Head Shell 7,40 9,00 EUR

Y F HS-E9-WOODWooden Cartridge Headshell with GOLD LEAD

26,70 32,00 EUR

Y F AT6101Cartridge to headshell PCOCC lead wires. Perfect Crystal OCC quad wire (PCOCC high purity oxygen free conductor) 0.12mm x 22 core strand construction24K gold plated crimped lead tip

13,10 16,00 EUR

Y F AT6106 Headshell leads set from Quattro Hybrid Lead Wire with gilded connection contacts. The Headshell leads set consists of 4 cables (white, green, blue, red). 46,00 55,00 EUR

Y F AS-02G Headshell Lead Wire Set-GOLD White, red, blue & green colour 3,00 4,00 EUR

Y F AS-01 Screw Set for Cartridge Head Shell 3,40 4,00 EUR

Y F AT6180

Audio Technica AT6180 Strobo Scope .Accurate and easy to use turntable speed checker made by Audio-Technica. To use the Audio-Technica AT6180 Strobe Disc, place it over the spindle of your turntable and turn your turntable on. Then, watch the strobe ring under a normal fluorescent or LED light. It should be easy to see with silver and black markings. Next, adjust the speed control of your turntable until the bands in the ring appear stationary. Your turntable is now rotating at the speed that you selected.Specifications: • Four speed support: 33 1/3, 45 RPM with 50 Hz and 60 Hz markings • Dimensions: 104 mm diameter (4.095 inches) • Weight: Approximately 8 g • Main material: PC

27,00 32,00 EUR

Y F RC-110 Stroboscope Disc-Acryl 16,30 20,00 EUR

Y F DM200 Antistatic Turntable Slipmat 4,20 5,00 EUR

Y F DM205Rubber Turntable Mat. Diameter: 290mm Thickness: 3mm

11,60 14,00 EUR

Y F CA-001 Cartridge Alignment Protractor 7,00 8,00 EUR

Y F TAC-01 Anti-static Carbon Fiber Record Auto Cleaning Arm with Grounding and Stylus Brush 11,60 14,00 EUR

Y F DC-05P Antistatic Carbon Fiber Record Brush 5,50 7,00 EUR

Y F DC-305Precision Turntable Level. Leveling a turntable is essential to ensure proper performance. If your turntable isn’t level, its speed, tracking ability and tone-arm motion may be affected. The Audio-Technica AT615 machined aluminum turntable level is simple

8,70 10,00 EUR

Y F DC-202 Velvet Pad Record Brush with Stylus Brush 4,20 5,00 EUR

Tel: (02) 978 20 25 (office)Fax: (02) 978 58 70Tel: (02) 95 15 690 (store) Please note all prices in the first column are without V.A.T.!!!

ProTechnica EOOD Iskarsko Shaussee 7

BG-1528 Sofia

Audio-Technica Page 5

E C Model DescriptionEURNetto

(ex. VAT)

EUR+ 20% DDS

(incl. VAT)

Y F MHFC-2Hi-Fi Cleaning Kit. Contains: 1xCD/DVD Cleaning Pad, 1xCD/DVD Cleaning Fluid 20ml, 1xAntistatic Carbon Fiber Record Brush, 1xAntistatic Stylus Cleaner (Cleaning Fluid 20ml + Cleaning Brush), 1xAntistatic Record Cleaning Fluid 20ml, 1xAntistatic Record Cleaning Cloth 21 x 28cm

11,60 14,00 EUR

Y F CD-600CD/DVD/Blu-ray Total Maintenance Kit Contains: 1xCD/DVD/Blu-ray Lens Cleaner 6-Brushes , 1xCD/DVD/Blu-ray Lens Cleaning Fluid 10ml , 1xCD/DVD/Blu-ray Disc Cleaning Pad , 1xCD/DVD/Blu-ray Disc Cleaning Spray 30ml , 1xCD/DVD/Blu-ray Cleaning Cloth, 1xDust Cleaning Brush

9,70 12,00 EUR

Tel: (02) 978 20 25 (office)Fax: (02) 978 58 70Tel: (02) 95 15 690 (store) Please note all prices in the first column are without V.A.T.!!!

ProTechnica EOOD Iskarsko Shaussee 7

BG-1528 Sofia