AtLiteCatalog #

Project

Comments

Prepared by

Type

Date

The Atlite Mini is a UL924 and NYC code compliant LED emergency light available with two or three 65 lumen heads that create up to 27 feet of emergency egress coverage. Its J-box size metal housing is easy to install and creates a minimal presence in the workspace.

SPECIFICATION FEATURES

Electrical- Dual Voltage Input 120/277VAC, 60Hz- Line-latching- Brownout circuit- Low Voltage Disconnect- Overload/Short Circuit Protection- Test Switch/Power connectorfacilitates installation

- 3.6V, .78W DC Long Lasting LED Heads- 240V capable with 48 hr recharge

Housing Construction- Sheet metal housing withwhite finish

- J-box and conduit knockouts foreasy installation

- Suitable for wall or ceilingmount applications

- Universal J-box mountingpattern

- Keyhole mounting slots- Available in white color

Battery- Sealed nickel cadmium- Maintenance-free, long-life- Full recharge time: 24 hrs (max.)48 hrs for 240V

- Polarized battery terminals

Code Compliance- UL 924 Damp Location Listed- Life Safety NFPA 101- NEC/OSHA- Most State and Local Codes- Operating temperaturerange 10 °C to 40 °C

- California Energy Codecompliant

Head/Lamp Data- Long Life LED Emergency Heads- Two or three head

options available- Fully adjustable- High impact thermoplastic- Matches housing finish

Warranty- Five-year warranty- Seven-year prorated battery warranty

ATLEMINI SERIES

TD505074ENMarch 19, 2019 11:49 AM

DESCRIPTION

E N E R G Y D A T A

ATLEMINI-2H

Input Power:

120V = .33W

277V = .47W

Input Current

(Max.):

120V = .06A

277V = .07A

ATLEMINI-3H

Input Power:

120V = 0.6W

277V = 0.8W

Input Current

(Max.):

120V = .07A

277V = .07A

EMERGENCY LIGHTING

SHEET METAL HOUSING

NICKEL CADMIUM BATTERY

LED SOURCE

UL924 CODE COMPLIANT

NYC CODE COMPLIANT

ELECTRICAL RATINGS

Rated Wattage

Model DC Voltage 1.5 Hours

ATLEMINI-2H 3.6 volts 1.5 watts

ATLEMINI-3H 3.6 volts 3.0 watts

Note: Each Long Life LED Emergency

Head replaces a 5.4 Watt

Incandescent lamp.

operatingtemperaturerange

-20˚to 50˚Coperatingtemperaturerange

10˚ to 40˚C

18 ft.

27 ft.

Emergency Egress Coverage

Path width 2 Head 3 Head

3 feet wide 18 feet 27 feet

6 feet wide 15 feet 23 feet

5-1/8"130

2-1/2"63

3-1/8"80

7-1/2"191

1-7/8"47

2-3/16"55

5-1/8"130

7-9/16"192

2-1/2"63

2-3/16"55

5"127

10"255

3/16"5

1-7/8"47

REVISIONS

REV. DESCRIPTION DATE CHANGE_NUMBER BY APPROVED

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

THIRD ANGLE PROJECTION

MATERIAL:

SHEET METAL PIERCEDEXTRUDED, NAIL PUNCH HOLE

METRIC (MM)

ENGLISH (IN) .X.XX.XXX.X.XX.XXX

DIMENSIONS ARE IN INCHESDIMENSIONS IN [ ] ARE IN MM

ELECTRONIC CAD DRAWING. DONOT REVISE MANUALLY.

20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 PAGE

REVUSE WITH MULTI-SHEET DRAWINGS

TITLE:

SIZE: DWG NO: REV:

SHEETVOL:WT:SCALE:SURFACE AREA:DO NOT SCALE DRAWING

FINISH:

APPR:

CHKD:

DRWN:

DATEAPPROVALS0.0300.0100.0050.750.250.12

x.x

x.x

DENOTES CRITICALDIMENSIONS ANDGUAGE CHECK POINTS

DENOTES FIRST PIECE AND IN-PROCESS INSPECTION

DENOTES FIRST PIECE INSPECTION ONLY

FPC

CONFIDENTIAL - The information contained in this document is th e property of Industries, Inc. It is not for public disclosure. Possession of the information does not convey any right to loan, sell, or disclose the information. U nauthorized reproduction or use of the information is prohibited. This document is to be r eturned to Industries Inc. upon completion of the purpose for which it was loaned or upon request. COPYRIGHT Industries Inc. This is an unpublished work. The disclosure of this work is limited to select personnel. Further dissemination or disclosure to the public is PROHIBITED. This unpublished work is protected by Federal Copy right law and all rights thereunder are reserved by Industries, Inc.

PART NUMBER

DCLP-FAI-SL075-LineArt

0

661.17 GM 243267.27 MM3

2

L MOD: E0438910 4/26/2018

CLP-

FAI-S

L075

-Line

Art

TOLERANCE GENERAL SHEETMETAL

0.750.38

.XX

.XXX

.XX

.XXX0.030.015

SDIMENSIONS THAT AFFECTSAFE HANDLING OROPERATION

272593.64 MM2

DEV/ZINT NO:

MUST CONFORM TO ROHS SPECIFICATION CL-ES-1025

2 OF

ANGLES 1.0ALL

ENGLISH (IN)

METRIC (MM) +0.00- 0.13

+0.000- 0.005

Specifications and dimensions subject to change without notice.

ATLEMINI SERIES

TECHNICAL DATA

LED HeadsThe polycarbonate 65 lumen LED heads are fully adjustable to enable wall or ceiling mount applications.

Housing ConstructionThe AtLite Mini-series housing is made of 20 gauge sheet metal. It has a conduit access point along with a full J-box knock out pattern on the back of the fixture to enable wall, ceiling or pendant mounting (3 head version only).

Line-LatchedAtLite Mini-Series line-latched electroniccircuitry makes installation easy andeconomical. A labor efficient AC-activatedload switch prevents the lamps from turningon during installation to a non-energized ACcircuit. Linelatching eliminates the need for acontractor’s return to a job site to connect thebatteries when the building’s main power ispermanently turned on.

Solid-State ChargerThe AtLite Mini-Series is supplied with a 120/240/277 VAC, voltage regulated solid-state charger. Upon restoration of AC current after a power failure, the charger provides a high charge rate. The charge circuit reacts to the condition of the battery and alters the rate of charge in order to maintain peak battery capacity and maximize battery life.Solid-state construction recharges the batteryfollowing a power failure in accordance with UL 924.

Brownout CircuitThe brownout circuit in AtLite Emergency unitsmonitor the flow of AC current to the unit andactivates the emergency lighting system whena predetermined reduction of AC power occurs.This dip in voltage will cause most ballastedfixtures to extinguish causing loss of normallighting even though a total power failure hasnot occurred.

Low Voltage DisconnectWhen the battery’s terminal voltage falls below80% of the rated voltage, the low voltagecircuitry disconnects the lighting load. Thedisconnect remains in effect until normal utilitypower is restored, preventing deep batterydischarge.

Test Switch/Power Indicator LightA test switch permits the activation of theemergency circuit for a complete operationalsystem check. The Power Indicator Lightprovides assurance that the AC power is on.

Sealed Nickel Cadmium BatteryAtLite Emergency sealed nickel cadmiumbatteries are maintenance free with a lifeexpactancy of 10 years. The sealed rechargablenickel cadmium battery offers high dischargerates and stable performance over a widerange of temperatures.

WarrantyAtLite LED Emergency products are backed by a five-year product warranty and a seven-year prorated battery warranty.

ORDERING INFORMATION

SAMPLE NUMBER: ATLEMINI-2H

Series Battery Remote Heads Powered Catalog numbers

ATLE = AtLite LED emergency

Mini = J-box size 2H = two heads3H = three heads

ATLEMINI-2HATLEMINI-3H

Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com