Embed Size (px)
Citation preview
AUCTION CATALOG OF ANTIQUE WRENCHES
TO BE SOLD AT PUBLIC AUCTION HELD IN CONJUNCTION WITH THE FALL MEETING OF
THE MISSOURI VALLEY WRENCH CLUB
CONSISTING OF
85 BOX LOTS AND OVER 900 INDIVIDUAL LOTS, EACH
SELLING TO THE HIGH BIDDER FOR ONE MONEY.
_____________________________________________
BOX LOTS BEGIN SELLING AT 12:30 PM ON FRIDAY, SEPTEMBER
20TH
, 2013
_________________________________________________________
INDIVIDUAL LOTS BEGIN SELLING AT 9:00 AM ON SATURDAY,
SEPTEMBER 21ST
, 2013
A BREAK FOR LUNCH WILL BE TAKEN BETWEEN 12:00 AND 12:30, THEN SELLING WILL RESUME
AND CONTINUE UNTIL ALL LOTS ARE SOLD
____________________________________________________________________________________
Auction to be held at the show grounds of the Badger Steam & Gas Engine Club, located
at S3347 Sand Road, Baraboo, WI 53913. Maps to the grouds can be found at:
www.badgersteamandgas.com
Larger and higher resolution pictures of all the wrenches can be seen at:
http://wrenchingnews.com/McGhee-mvwc-auction-2013/all-pics-one-page.html
Printed copies of the complete catalog are available for $5.00 from Jim McGhee
(see contact info below)
Auction Managers: Absentee Bids: Auctioneer:
Lyle Opperman Ron Jensen Tom Simonson
801 Park Street 1415 Co. Rd. A 11921 Hwy 33
Baraboo, WI 53593 Edgerton, WI 53534 Cashton, WI 54619
(608)356-4043 (608)228-5963 (608)654-5162
(608)343-5162
Jim McGhee
8291 Hwy 39
Hollandale, WI 53544
(608)574-4607
TERMS OF SALE:
Bids and settlement in US currency; cash or check (with proper identification). No items to
be removed until settled for. Auction Company and owners shall not be responsible for any
accident or loss. Sold as is, where is. No guarantees or warranties are expressed or implied.
Statements made sale day take precedence over any printed ad.
NO CREDIT CARDS
More information on the auction and Missouri Valley Wrench Club can be found on the
Wrenching News website:
www.wrenchingnews.com
ABSENTEE BID POLICY & AUCTION DETAILS
Absentee bids may be submitted by mail or phone to Ron Jensen (contact information on
cover of catalog). Bid by lot number.
There are 90 box lots and they will be sold starting at 12:30 p.m. on Friday, September 20th.
There are no description for these lots, study the photos and bid accordingly. The box lots
will be sold as such, there will be no choice wrenches sold out of the box lots.
There are about 900 individual lots, which we will begin selling on Saturday morning at 9:00
a.m. We will take a half hour break for lunch at noon and then resume the sale continuing
until finished.
Your bid will be entered competitively at one bid increment over the next highest bid, up to
your maximum. A 5% handling charge (minimum of $3.00 total) will be added to the selling
price of a winning absentee bid, plus shipping, insurance and sales tax (where applicable). If
insurance is not purchased, we will not be responsible for loss or damage. Do not be afraid to
submit “low ball” bids, you could win some bargains.
Please include your phone number as all winning bidders will be notified by phone.
Notification will be Tuesday through Friday following the sale as it takes time to sort, weigh,
wrap and determine shipping costs. Ron would like to have your bids by September 14th.
Lot No.
Lot Descriptions (Pictures Including Unlisted Box Lots Are Below Last Description)
1 Suterland-good condition, some surface rust
2 Hawkbill-rare, working, some pitting
3 Acme twist 15 ¼”-looks good
4 Morgan, Albany Wisconsin-good
5 Shaw 4”-good
6 Craft 14”-good
7 Trimo 10”auto-good
8 J.R. Long Wedge adjustable-some pitting
9 Charles Hall no. 15, 7”
10 Craft 12”-good
11 Trimo 6” early patent
12 Craft 6”-good
13 Naco adjustable plier-minor pits
14 Lowentraut brace wrench-shoulder pad cracked
15 Mossberg no. 76-scarce and nice
16 Becklin 14”-good
17 Pollocks 9”-2 pieces missing from jaw
18 G.F Milwaukee-nice
19 B. adjustable-good
20 Quick adjust alligator
21 Keystone ratchet- rare
22 Transatlantic with tools in handle-good
23 Stephens ¼”-good
24 JMC Blasting Pliers
25 Blasting Pliers Sargent & Co.
26 Vandegrift 12”-wood cracked
27 Rex quick adjustable-chip gone from jaw
28 Transatlantic clock and watch, tools in handle-good
29 Keith wrench 14”-rare, some tooth chipping
30 C&E Marshalltown-good
31 Griplock-dings from use
32 Barnes 5 ½” adjustable-good
33 A.P. Joy adjustable wagon wrench-rusty
34 Johnston 20th
century-missing shoulder pad
35 Craft 6”-good
36 Diamond adjustable wagon wrench-rough
37 Waukesha quick adjustable-good
38 Shaw 6”-good
39 H.D. Smith folding handle screwdriver
40 John Deere 11 ¾” box end-good
41 John Deere 340 SC –some pitting
42 Wakefield quick adjust-surface rust
43 Deere Mansur A523 no name-scarce
44 Ford adjustable 6 ½” rare-good
45 Unmarked Deere 136-rust, some pits
46 Blacksmith made adjustable
47 Associated cream separator wrench
48 Deere &Co. 8” wood handle adjust
49 Baxter 4” adjustable-surface rust
50 Odd little pliers
51 Roderick Lean D44 painted-very nice
52 Oliver RP 210 13 ½” original paint-VERY nice
53 Morrison Mfg, Co. 10 ½” painted-some pitting
54 C 114 6 ¾” painted-nice
55 832 A David Bradley 13” painted-very nice
56 Iron Age e-39 8 ½” Cutout painted-looks nice
57 Litchfield S437 Cutout painted-repaired, nice
58 J.P. Manny 12” painted-looks nice
59 David Bradley 123 7 ½” painted
60 Cockshutt D-797 7 ½”-nice
61 Moline E13 8 ½” unpainted-nice
62 Owatonna Mfg. Co. 8” painted-nice
63 IHC #136386 spark plug wrench unpainted-nice
64 C 621 Appleton 10” unpainted-like new
65 Hayes A116 Deering type unpainted-very nice
66 Leader 10 ½” painted-looks good
67 Tague&Kerlin 8 ½” painted-good wrench
68 David Bradley B23 unpainted-good wrench
69 1250 Evans 9” unpainted-nice
70 Wheeler IHC 11” Unmarked-light pitting
71 Cockshutt 10” stamped steel unpainted-nice
72 N.C. South Bend Plow Co. 12 ½” painted-nice
73 R11 Gale 9 ¼” painted-looks good
74 1999 Silver Mfg. Col 13 ½” painted-nice
75 ACME A-881 8 ½” painted-good wrench
76 J.M. Co. 6 ½” unpainted-very nice
77 # 140 Massey Harris 8 ½” unpainted-looks nice
78 PPY Eureka Mower Co. 8 ¾” painted-nice
79 B.F. Avery&Sons G-177 10 ½” unpainted-nice
80 Stover or Silvers??? 14 ¼” painted-nice
81 LaCrosse K29
82 Hayward-pitted
83 6776 Geiser-good
84 Geiser peerless steam wrench-unusual marking
85 148 John Deere-some rust, not bad
86 Fleury Sulky-pitted
87 Deere M114-rare/good McGee cultivator
88 A-Deere “S” wrench-pitted
89 11 ¾” Deere double box
90 Union Mal Iron Co. rare-good
91 Deere H68-good
92 John Deere King Corn Silo rare-good
93 John Deere 1340 SC Twisted
94 167 Deere and Mansur-very pitted
95 B Deere-like 159-scarce
96 Deere HZ2836
97 Deere cutout A196A-rust
98 Dain L136E
99 Deere or IHC 80 ½ rare-nice
100 Moline plow WP241
101 Deere Marseilles 1459-good
102 Case eagle P388
103 Red Cross Filter Co.
104 Dexter Queen Buggy wrench-very pitted
105 B&R crate hammer
106 490 B IHC-jaw crack
107 Hoof Trimmer
108 Fuller & Johnson 2P30
109 C11 Dempster-some rust
110 Grand Detour G111
111 Moline Plow B355 scarce-some rust
112 Belmont Iron Works 10” wood handle monkey wrench-good
113 12” Baxters rare-some rust
114 Tiger Stoddard-pitted
115 Fuller 2H33-pitted and bent
116 Wheel and Seeder-Scarce and dirty
117 So. Bend Chilled Plow 379
118 J. Thompson&Sons Beloit scarce-nice
119 IHC 1691 T soc.-used
120 Gear wrench Texas
121 Litchfield S437 cutout wrench-2 miscast letters
122 Bental 646 English wrench-some rust
123 E-39 Bateman-looks good, but dirty
124 Billing and Spencer 5” adjustable
125 Ferguson Wrench-good but dirty
126 Fuller and Johnson AH 4 Spark plug wrench rare-good
127 Leroy-good shape
128 B&R “s” handled adjustable wrench-used
129 Blount plow 286
130 Vandergrift web handle 6”
131 G.W. Newman quick adjustable
132 Lever wrench rare-good
133 John Deere 10” wood handled monkey wrench-scarce
134 Deere cutout-crack
135 Lawrence-Clark buggy nut wrench
136 John Deere 15 ½” Double box end
137 J I Case buggy whip holder-scarce
138 Verity cutout-painted
139 Deere 124-good
140 Standard tool quick adjustable 6”-good
141 7 ¾” bowtie wrench adjustable
142 Baker Ice Machine-good
143 Awn tool
144 Hayward quick adjustable pipe wrench
145 Empire quick adjust pipe wrench
146 Steger Combo tool
147 Diamond 8” adjustable buggy wrench
148 Chamberlain wrench-very nice
149 GM Co. quick adjust
150 H.D Smith ballpeen-nice
151 Bonney adjustable alligator
152 Dalzell no. 12 buggy-pitted
153 Shock Tier
154 Buffalo Pitts cutout-pitted
155 8” adjustable shop made
156 8-10” double crescent
157 Staver buggy
158 H.D. Smith 8” “s” handle-used
159 Peters E adjustable nut-seldom seen
160 8” quick adjust scarce-nice
161 Babcock buggy wrench-cracked
162 4 crescent wrenches
163 4- 4” crescents
164 5-4” crescents
165 5-4” crescents
166 5-4” crescents
167 5-4” crescents
168 5-4” crescents
169 6” pipe jaw
170 Buffum 6” “s” wrench
171 3-adjustable 2-6” 1-8”
172 8” 2-6 one pipe
173 H.D. Smith heavy screwdriver
174 Beebe cart and step
175 Early vice grip
176 Smith no 5 double wing screwdriver
177 Fray right angle brace
178 Everwear castings
179 H.D. Smith 5/8” end wrench
180 Taylor pipe and nut quick adjust 19”-nice
181 Railroad track level-Stanley
182 Door jamb level Dunlap-Sears Roebuck
183 E6 Roderick Lean
183-A Smith 8” wood handle screwdriver
184 Champion ¾ anvil hardy
185 Monitor Drill A270
186 H5025 five hydrant wrench
187 5A sawset
188 W402 Emerson-good
190 Spoke pointer
191 Unmarked 9 3/8” heavy screwdriver
192 Milwaukee cast seat #S110-no cracks
193 Craftsman Tool Co. 24”-Oily but good
194 2 tools multi box end Globe and Indestro
195 Deere Mansur A523 no name-good
196 Moline checkrow pliers-good
197 2 Cast farm wrenches-both good
198 Vaughan and Bushnell pipe-good
199 Parry whip holder and buggy wrench-good
200 John Deere chain break
201 X-60 Wood rare-good
202 2-sawsets complete-working
203 Millers Falls corner brace-good
204 2-corner clamps
205 Ferguson Measuring stick wrench-good
206 Fuller and Johnson 2P30-pitted
207 H&D Cast wrench-good
208 Milwaukee machinery wrench
209 2 wrenches Malsbary Williams-both good
210 Odd Bell system cast wrench 590
211 Wescott 14” “s” handle-good
212 Ford 52204 shop wrench-good
213 Wescott 10” ‘s’ handle pipe wrench
214 2 Deere wrenches Z-78 and 196
215 Cast label maker
216 IHC 1692 T cast socket
217 BMC no. 11 adj. vice tool
218 Wedgon no. 1 screw machine
219 Stearns spoke pointer-missing blade
220 Small sawset
221 Sawset
222 Small sawset
223 Sawset
224 Fulton rim tool
225 Sawset
226 Multipurpose tool
227 Oliver CP245 cast wrench-good
228 Stanley no. 1 8” square
229 Small sawset
230 Moline check row pliers
231 Huber engine A399-good
232 BHM corp. crate tool
233 246 Deere-some pitting
234 733 CB&O-scarce and good
235 Dain, Ottumwa Ia-good
236 A Belanger-Montmagny 45
237 Kauffman 1 buggy-good
238 B ‘s’ double end adjustable-good
239 Gale DG 92-rusty
240 LM unknown
241 Haworths 103 check rower
242 IHC 925 T
243 Knowlton pits-rust
244 Rock Island Plow Co. L048 Hayloader
245 Avery 464-good
246 8” gasline pliers
247 Appleton C620
248 John P. Manny-pitted with rust
249 Ohio Rake Co.-good
250 Erie governor 1 ½-4 ½
251 Twin City Tank and Silo Co. wrench
252 2699 TM IHC cast socket- good
253 Rud Sack 27
254 Blocki G69-good
255 Remingtion-good
256 McCormick IHC-good
257 Avery 251-good
258 IHC P3156-good
259 Dowagiac-good w/ some rust
260 Morrison Mfg. Co-good w/ some rust
261 IHC G8917
262 B&C double end adjustable ‘s’ scarce-one wrong screw
263 IHC N13
264 IHC T225-very faint marking
265 Dowagiac F97A
266 Letz E782-rust
267 IHC H4649-good/scarce
268 IHC 379-rust
269 IHC 950 C-good/rust
270 Blount 430-rust and pits
271 Tiger grip-pitted/worn
272 Fairbanks Morse GRB 125-good
273 Stevens-pitted/stuck/rust
274 Girder no. 91 Jos. Lucas-good w/ dings
275 Tedder one side, loader the other-good w/ dings
276 Millers vehicle wrench-faint marking
277 Farmers friend casting spring loaded
278 Farmers friend casting spring loaded
279 Millers vehicle wrench no. 1 buggy-good
280 Smallest Vandegrift adj.-stuck
281 Emerson Talcott 1856 pat. 2 row hand corn planter-rows 42”apart, very early/very nice
282 5’ long brass grain sampler Dean Gamet&Co.-good/rare
283 34” ice saw cast handle
284 Unusual hay fork
285 Unusual hay fork
286 22 bicycle spoke wrench display-nice
287 26 adj. bike wrenches, some quite scarce
288 Large grain scoop-good shape
289 Mercue large grain scoop-1881 pat.
290 Leg mounted corn cutter-blacksmith made
291 Aermotor windmill governor-missing parts
292 Fence stretcher
293 J&K Mfg. Co. Mt Vernon, Ia. Fence stretcher 1897
294 Louden hay tool-1885 patent
295 Hayfork
296 Nice pair of Dremel points
297 Bundle carrier trip pedal E8-good
298 109 cast wrench-good
299 Rutenber VW1 wrench-good
300 John P. Manny-pitted
301 Morris wrench-some minor pitting, good otherwise
302 Planet Jr. H-4 solid-some dings, good
303 Planet Jr. H-4 cutout-a little bent/good
304 Universal cutout wrench-good
305 Granite state cutout wrench-good
306 Planet Jr. cutout wrench K48
308 Multi-purpose plier-good
309 Craft 10”-good
310 Republic adj-knife-nice tool/rare
311 Small cast tongs-good
312 Robert McCormick 10” adj. IHC-scarce
313 Bonney 6” ‘s’ adj.-good
314 Plierwrench Eifel gear-very good
315 Multipurpose tool-good
316 Special purpose pliers-good
317 Combination hammer/screwdriver crescent tool-very good
318 Ferguson double-end adjustable-nice
319 Shop made adjustable wrench-nice
320 6” Wright wrench quick adjust-good
321 SVE Wright wrench-rare, a few dings
322 Myers combo wrench quick adjust-good
323 CP Wrench Co.- missing knife blade otherwise good
324 Decker aluminum hand corn sheller-good
325 Z 10” quick adjust-good
326 Z 12” quick adjust-good
327 6-8” doubt end crescent-good
328 8” Victor quick adjust wrench
329 Bonney 8” ‘s’ adjustable-good
330 Implement any angle Bloomington-good
331 BF Avery J 97-surface rust
332 Sheldon axle no. 78 pitted
333 Collison adjustable vice grip type-damaged
334 J.I.Case plow 124-pitted
335 699 S Ohio Cultivator-bent/ok
336 J.I.Case low 4106-good
337 Kingman Plow Co.-pitted
338 ET David Bradley-rust but ok
339 Pollocks quick adjust-very pitted, has pipe jaw
340 1250 maybe Evans-pitted
341 Bay State socket driver-stuck
342 Owatonna Mfg.-good
343 E 139 unknown-interesting wrench
344 Staver buggy-lettering poor
345 Cushman ford like wrench-bent/good
346 WWCo. H189-some pits
347 Hardscogg Ottumwa Ia.-pitted
348 A Ellwood-pitted/scarce
349 Massey Harris Z189-good
350 Ford measuring wrench-good
351 Part of a fencing tool wire twister
352 Acme 5” twist handle adjustable-rust
353 Interesting cast wrench-good
354 Crown and cork and seal 8 ½” long-good
355 Deere 196-good
356 John Deere 22509-some shallow pitting
357 IHC P&O cutout 1338-some pits
358 Ohio rake-some pitting
359 Fuller and Johnson 2P30 no name-rust
360 Sechler solid buggy wrench-very pitted
361 Minute Wheel hub wrench-scarce/rust
362 JI Case plow Co. 883-some pitting/bent
363 Undilla Silo 30-some pitting
364 H.D.Smith triple lever screwdriver-wood worn
365 Case Eagle 3329A-good
366 Emerson 8175A-good
367 Billings 4 ½” adjustable-good
368 Deere 196-numbers barely visible
369 Montomery Ward silo wrench-rust but good
370 Buffum door latch-pitting
371 Pickering governer wrench-good
372 J480 Plano IHC pitman wrench-rust but good
373 IHC M141-rust but ok
374 BF Avery&Sons chilled plow-slight jaw crack
375 Western Silo Co. Champion-good
376 Sams Service Conoco Gas and fuel oil-good
377 Oliver RP207 –bent but good
378 Ford 52 204 Shop wrench-good
379 Oliver CP245 –a little bent but good
380 Harder 108-very pitted
381 Bell system hammer-good
382 Stanley Bell system hammer-good
383 Saw Hammerers hammer-good
384 Saw Hammerers hammer-good
385 Large cast farm wrench-good
386 Fuller and Johnson 2P30 no name-good
387 Planet Jr. H-4 solid
388 Unadilla Silo 30-good
389 Parry buggy wrench and whip holder-some pitting
390 Sheldon axle 82-bent but good
391 St. Louis wrench-bent but good
392 Harper buggy 1” –good
393 Maytag no. 8 wrench-good
394 Planet Jr. H-4 solid-very pitted
395 Blackhawk cutout w/ pin-very nice
396 Iron Age E 39 cutout-Good
397 Buckeye ‘s’ double end adjustable-pitting nut missing ears
398 M94 Blackhawk Oliver weak mark-bent
399 M168 Blackhawk-rust but good
400 Universal Cutout-no number
401 Comet 216 cutout-pitting
402 IHC 770 E cutout-some pitting otherwise good
403 The Insurance KK1753-good
404 8” gasline pliers-good
405 Rock Island Plow Co. Hayloader wrench L048-some pitting
406 Sterling F37-scarce but pitted
407 Henny Buggy wrench-good
408 Cook Buggy wrench 7/8-nice
409 Handy Beer tapper wrench Kewaunee, Wisconsin-very good
410 Famous Ohio M625 –minor pitting
411 Blackhawk cutout-no peg/pitting
412 P&O cutout IHC 1338-good
413 Litchfield cutout 54370-minor pitting
414 Planet Jr K48-good
415 Port Huron 39-good
416 Brennan&Co. Louisville, KY KR299 Kentucky Drills-good
417 JP Manny-minor pitting
418 Perfect handle 1 1/8 end wrench-dings
419 Perfect handle 4 winged screwdriver-good
420 Perfect handle end wrench 13/8 or 17/16-good
421 Perfect handle valve tool-good
422 Perfect handle end wrench 1” says Brown and Sharpe Providence RI, USA-good
423 Perfect handle 6” straight adjustable-some dings, good
424 Perfect handle 8” ‘s’ handle adjustable mushroomed jaws-good
425 Perfect handle 5 winged screwdriver-a little rough
426 Perfect handle 3 winged screwdriver-a little rough-good
427 Perfect handle ½ end wrench-jaws filed wider
428 Perfect handle ½ end wrench jaws misshaped
429 Shaw wrench 7” jaw chips-good
430 Shaw wrench 9 ½”-dings but good
431 John Deere S2724D-rare, some pitting
432 Deere&Co. 12” Wood handled monkey wrench-very rare, very nice
433 Maseilles-Deere 243 paint-good
434 John Deere D 34 spru crack
435 Crane adjustable wrench 1860-1880 approximate pat –pitted, scarce
436 Cadillac—pitting
437 Fasto Coupling no. 1-some pitting
438 P&O Co. 3682 pitting
439 P.D.W Co. Georgetown Ky. P5 hub wrench-rusty
440 IHC M238-rusty
441 EB 16”-rusty
442 Newell Sanders Plow Co. A260-good
443 P&O Co. 3682-minor pitting, good
444 Special purpose Blackhawk 5/8-good
445 Case 75L graindrill wrench-some pitting
446 Seeder wrench-good
447 B&C 14” 48A ‘s’ adjustable-dirty but looks good
448 Galloway cream separator wrench-shallow pitts, bent
449 Pasco 1021 hub wrench-repaired
450 Moline RD2108-good
451 BF Avery&Sons G176A-rust
452 BF Avery&Sons AA38-good
453 BF Avery&Sonos C63-good
454 Sheldon axle buggy wrench 66 or 99-good
455 Rhea-Thielens Imp. Co. Peoria-Nicest of these I’ve ever seen
456 IHC 3274A-used, good
457 C107 cast wrench unknown origin-good
458 Oliver RP210-pitted, bent
459 16”Emerson W1074-minor pitting
460 Avery of Peoria 94 ‘T’-good
461 Johnston Harvester 47 W-Scarce, after cleaning some pitts
462 JI CasePlow Co. 124-rusted and pitted
463 IHC H523-scarce variety, a little bent but good
464 Unmarked Vesper Silo wrench longer of the two straight wrenches-good
465 Cast nut cracker, Home 1918 pat. –scarce, rusty
466 Wiard W.P Co. 71-rusty, pitted
467 MM Fdy. Co. ¾ and 7/8-rare, pitted
468 IHC R136 wrench-good, part number distorted
469 Thomas Mfg. Co Dayton Ohio combo farm tool-good
470 M-D DO unknown square socket-good
471 9 ½” Vandegrift 14-good
472 14” Craftsman pipe wrench-dirty but good
473 IHC H3769M-good
474 886C Case eagle-shallow pitting
475 ICH H3769M-good
476 ICH Kentucky drills KR299-shallow pitting
477 Indiana Silo Co.-good
478 IHC 26494D-good
479 Robinson Spreader Co. Vinton, IA-jaws distorted
480 Rock Island Plow Co. H358-pitted
481 Van Brunt-Deere 97M Scarce-good, w/ minor pitting
482 John Deere A124A-some pitting, but not bad
483 John Deere S8 King Corn Silo-pitting, distorted letters
484 Blackhawk M167-minor pitting
485 Unknown combo tool-good
486 Twin City tank&Silo Minneapolis, Minn-Small lettering, good
487 3000 M Plow clevis-good
488 Sterling no. 295 double socket-good
489 Estate cutout stove lid lifter-good
490 Case Eagle 3137A-good
491 14 ½” unknown pipe-used but okay
492 Unusual round jaw plier-pitted
493 Chain belt silo type wrench 9/16 Milw. Wis-shallow pits
494 Bud Wheel Co. 2956-good
495 Fordson F2197 tractor-good
496 Peculiar little square nut quick adjust-good
497 Combo too-good
498 JH Co. Vandegrift 2815 Scarce-good
499 Unknown quick adjust-good
500 Twin City Tank and Silo Minneapolis, Minn-large letters, good
501 Sheldon Axle buggy 76-good
502 636 Louden hay carrier wrench-good
503 Ripleys patent-pitted
504 Fomoco measuring wrench 9N17014 no. 29-good
505 Wood handled sawset-1 handle crack
506 Philadelphia rare-jaw crack
507 Wood handled sawset-used but good
508 Unusual pipe jaw plier-tooth missing
509 Ford lifter no. 2-good
510 Wire Wheel Corp. 6505 B hub wrench hammered
511 Wire stretcher-good
512 Lownes pat. pipe wrench-some pitting, bent handle
513 Slide adjustable pat. unknown-1/2 knob gone
514 8” Barcalo Buffalo-used, but good
515 CC wrench Omaha –piece gone from moving jaw
516 Walden 13” ratchet –good
517 8” twist handle monkey-good
518 AD wrench Baraboo, Wis 9”-good
519 12” shark jaw chip and cotter key
520 Billings 5” made for Pope Mfg. –good
521 Universal wrench 8” –good
522 Ridgid 5” pipe-good
523 Barcalo Buffalo drain plug wrench, pitted
524 8” Baraboo cant slip wrench-good
525 5” special purpose cutter-good
526 Fordson 10” adjustable one six types-good
527 Stanley end wrench-good
528 Hande quick adjust-good
529 Adj. wagon wrench-good
530 Tiger grip-minor jaw chips
531 P&O IHC 13596-good
532 P&O IHC 13596-good/different
533 R-11 unknown small cast wrench-good
534 JICase buggy whip holder-good
535 Milwaukee machinery wrench-good
536 Champion no. 175 plug wrench-good
537 W402 Emerson-good
538 Advance fence stretcher –good
539 Oliver RP 208-good
540 Johnston Harvester 91-pitted
541 103 Haworth check rower-pitted
542 171 J Advance Rumley-rust and pits
543 South Bend Chilled plow-good
544 81 Cross wrench-good
545 81 Cross wrench-pitted
546 Ripleys patent quick adjust-pitted
547 Moline drill A1037-good
548 Case eagle 1815C-good
549 Oliver 183 wrench-pitted
550 Ingersoll 354-pitted
551 L298 New Idea-good
552 King Plow Co. K55-pitted
553 Goodyear tire tool-good
554 Ingersoll Rand 671
555 Gale 011A-pitted
556 Fairbanks Morse auto type adjustable-dings
557 Massey Harris spark plug wrench 202783MI-good
558 Avery 251- pitting
559 Harry Simons Lmbr Mfg. Co. St Paul rare-good
560 Acme A881-good/rust
561 11” “Victor” quick adjust-pitted
562 Gladdings patent hay fork 1858 pat. rare
563 G83 Deering push header platform-good/no name
564 G83 Deering push header platform with name-good
565 McCormick round push header platform-good
566 McCormick kidney shaped push header platform-good
567 Ney drop pulley & Louden iron claw
568 Louden wood track hay carrier
569 Hunt Helm & Ferris adjustable hay carrier
570 8 wheel steel track hay carrier
571 Thistle digger
572 Mil Lt Co. hay fork
573 4 IHC Planter Plates
574 Unusual hay fork
575 Unusual hay fork
576 The Superior wood track hay carrier w/ drop pulley
577 Iwans solid socke&hayknife
578 Hunt Helm and Ferris swivel 1885 pat. hay carrier
579 JA Cross N.Y. Hay carrier
580 Stowell steel track hay carrier
581 IHC 632 LA socket-good
582 Hammer-wood –crack, dings
583 2 wirestock screwdrivers one IHC
584 2 IHC Screwdrivers
585 2 pliers each different-good
586 IHC cast toolbox-good
587 2 IHC P349 wrenches each different-good
588 Ratcheting screwdriver-good
589 Tubing clamp hacksaw guide-good
590 Chas. Croissant & Bro. 1872 pat. sawset-good
591 91 sawset-good
592 3 cast clamps-2 damaged
593 Leather tool-good
594 Daleco short proof timer
595 Stanley no. 194 angle plane-good
596 IHC Truck socket 4437H-rare but some pits
597 Sawset-good
598 ID 3363 Caterpillar wrench-rust but good
599 Wilde tube flaring clamp
600 Eagle hay carrier drop pulley
601 Small tool kit incomplete
602 IHC 925T scarce wrench
603 DM Co. no. 4 cast wrench used to be called Deere Mansur-no longer-Good
604 J G Wilson E235 wrench-good
605 2 sawsets-good
606 905 spud wrench-good
607 Unusual sawset-good
608 Eagle drop pulley for hay carrier-good
609 2 Blue point end wrenches 5/8 9/16 + ¾ 5/8
610 2” swordfish vice-good, made in China
611 3 Wire stock screwdrivers one IHC
612 ¾” square drive socket-good
613 1036 B and R1124 Rock Island wrenches
614 Marquette battery post tool-good
615 1 ¼”vice-nice
616 IHC F9136 wrench-good
617 Blue Point 9/16 wrench and cast wrench
618 Pike cast box w/ whetstone
619 IHC 2699 TM socket-good
620 Deering IHC sickle grinder complete scarce-good
621 Millers falls bench drill-incomplete but good
622 The master oil lid & Drey 1 qt. jar-good
623 Unusual cherry pitter-nice shape
624 Wooden buggy wheel traveler
625 Ames jeweled measuring device-good
626 Randall & Stickney measuring device-good
627 Lodish tri clover 25H large aluminum wrench
628 Monitor steam iron and trivet
629 Alfred Anderson Bratzlie maker-good
630 Eagle drop pulley for wood beam carrier-good
631 Plane IHC L320 no Plano logo-rare type, some pitting
632 Crandall expert+2 extra ends-good
633 12 adjustable wagon wrenches pat. Nov 2, 1880 –good
634 Dupleep 6” swing wrady broken spring pin
635 Combo plier alligator-scarce/good
636 5” double sided adjustable-good
637 10” Wright quick adjustable-good
638 14” Empire quick adjust pipe wrench-jaw chip
639 4-6” double ended crescent-good
640 Unmarked 4 ½” adjustable-good gem type
641 4” double sided adjustable-good
642 Griplock plier wrench-good
643 1880 5” wagon wrench-repaired lower jaw
644 No. 1 International adjustable wagon wrench-missing wooden knob
645 Very early vice grip Pat. Apr. 8 1924-good
646 8” HD Smith perf. handle-some pitting
647 Cin’ Ti tool Co. Very rare-good condition, missing spring release
648 Lambert wrench-pitted
649 German type adjustable-scarce/good
650 10” Wedge adjustable like Coes P.W.C Ky 30-pitted
651 Richards Shark 8”-pitted
652 Atlas 10 1888 pat.-good
653 Clipper 8 Rare type-good
654 Evans wrench 6”-good
655 Littles Automatic 10-good
656 Kone Mfg. 7”-good
657 The Anderson-scarce/good
658 Quickset quick adjust 10”-good
659 Boston wrench-good
660 Triplet wrench-good
661 Sargent blasting pliers-good
662 Benton wrench-some pitting
663 Efficiency Co. Milwaukee-good
664 Diamaloy DH16 Plier/cresecent-good
665 Crandell expert-good
666 Collison wrench-shallow pitting
667 S&A Mfg. Co. quick adjust-rare/good
668 Crandal expert adjustable-stuck
669 JC Speirs 5” adjustable-good
670 German type 12” double sided adjustable-good
671 J. S. Guyton crimper-good
672 No. 2 Bond wrench-minor pitting
673 14 John Deere marbles-good
674 Nappanee silos ¾-good
675 Sechler 1” buggy-good
676 Owatonna tool Co. L71 interesting adjustable-good
677 Midland Mfg. Co. Tarkio Kerlin wrench-pitted
678 871 B Check row pliers-scarce/good
679 Saginaw Silo The McClure Co.-good
680 Jiffy sheller Co. hand sheller-good
681 Harvester (HHF) drop pulley and clevis
682 Meyers OK hay carrier/drop pulley
683 Barnes hay carrier wood track-drop pulley missing
684 Ney no. 45 hay carrier-no drop pulley
685 Porter cutout 2x4 track hay carrier w/ drop pulley
686 Ney wood track hay carrier w/ drop pulley
687 Hunt Helm and Ferris 330 hay carrier w/ drop pulley
688 Strickler wood track hay carrier-no drop pulley
689 Myers hayrope trip
690 E.L Churhc wood track hay carrier 1876 pat.-no drop pulley
691 The only force drop planter-box and cover
692 John Deere cast toolbox cover Z412H
693 McCormick Deering toolbox cover and oil can holder
694 McCormick cast toolbox cover and oilcan holder
695 Janesville Machine Co. corn box cover
696 IHC tin corn box cover
697 2 Gale cast corn box covers
698 2 Hayes corn box covers H73
699 P&O corn box cover
700 American Seeding Machine Co. Richmond Indiana-Cornbox and cover
701 IHC J42 Cast seat
702 American Harro Co. cast seat-no evident cracks
703 Banner cast seat-piece broken out
704 Rock ford cast seat-no evident cracks
705 Victor cast seat painted-no evident cracks
706 Esterly cast seat part nos. on back H112A & M63-1 crack
707 Bud long cast seat 174-no cracks
708 South Bend chilled plow cast seat-no cracks
709 Furst and Bradley Mfg.Co.-broken ‘e’ and ‘f’ no. 82
710 Hocking Valley cast seat-no cracks
711 EUREKA 335 cast seat-no cracks
712 Chieftan Canton O-no cracks
713 Hapgood Plow Co. cast seat-no cracks
714 Keystone repaired ‘E’ (good repair)
715 JI Case plow works Racine tin seat-center crack
716 2 IH grain drill ends both 62083 R1-scarce
717 Small Monitor grain drill end
718 Small grain drill end M224
719 2 Small VB drill end-broken base on one
720 Small steel driller IHC-pitted/rust
720a Rare Port Huron wrench 1207E-nice
720b Reeves
720c Indian Motorcycle
720d The Prince brace wrench-some rust, good wood
721 2 Sterling drill ends
722 Moline drill end H2
723 2 drill ends S2 and S1
724 IHC drill end FA 8336
725 VB drill end H68M
726 VB drill end A319M JD
727 Farmers favorite grain and fertilizer end-very pitted
728 Owatonna drill end
729 Pair Gundlach drill ends
730 B999 drill end
731 Pair sterling ends
732 Single Sterling end 201
733 Single Sterling end
734 Hosmer buggy wrench-good
735 IHC E333 very scarce-nice
736 Montgomery Ward silo wrench-pitting
737 Studebaker 1 ¼” buggy wremch
738 Arn holt 911 pat. wrench-pitting
739 National Mall Casting Co. 5/8 silo wrench-scarce/pitted
740 Wheelers self rake-very nice
741 Hudson G69 wrench
742 Ill. Silo Co.-some pitting
743 Atomic saddle horn fencing tool-good
744 McCormick 10” wood handle monkey –good wood, some dings
745 Cary Spec. Co. corn sheller-good
746 Snow knocker hammer
747 Cary spec. Co. corn sheller-good
748 Check row wire pliers P252 and 253
749 Studebaker 7/8” buggy wrench-good
750 Iowa cream separator wrench-good
751 Robinson Spreade Co. A43 wrench-good
752 Snow knocker hammer
753 IHC A scarce wrench-good
754 No. 1 15 ½” long buggy wrench-largest I’ve seen, some pitting
755 165 buggy nicely marked wrench-good
756 Ranchman combo tool-good
757 T.G. Mandt wagon wrench-nice
758 Maytag no. 5 wrench-scarce, good
759 JWB wrench-some pits
760 Parker Plow co.-good
761 H&D cast wrench-good
762 Snow knocker hammer
763 Remington wrench-good
764 Montgomery Ward cream separator wrench-good
765 Letz Deere E782 711 pat.-good
766 Deering 3/8 and 5/16 double end wrench-rare/good
767 IHC chisel-pitting
768 Hills pat. adjustable-jaw crack, nice otherwise
769 Old turner leather tool
770 Morrison wrench-very nice condition except one small chip
771 2-8” gas line pliers
772 Tite grip wrench co. Milwaukee-good
773 Kirlin K115-good
774 H.A. Muckle buggy wrench 310-good
775 Benton quick adjust-good
776 Kento good quick adjust
777 Plane J122 IHC-good/hard to find
778 Church Bros. fencing tool end wrench-shallow pitting
779 Easter Machine works St. Paul Minnesota-good/scarce
780 John Fray no. 112 early brace and spoke pointer-good
781 12” Wescott ‘s’ adjustable early type-good
782 24” Hoe pipe wrench-good
783 Triangle armored cable tool-very good
784 Farwell tool hardware catalog-good
785 Shadbolt and Boyd Co. tool catalog-good
786 Edw K Tryon Co tools and other catalog-good
787 Cadillac wrench-shallow pitting
788 PPY wrench-good
789 Large heavy old cast wrench-pitted
790 Bridge tool Co no. 1-good
791 IHC CP245 wrench-crack
792 Drawbar pin wrench-good
793 Allis Chalmers wrench-dings
794 Double box early-ok
795 L.M. wrench screwdiver-good
796 LaCrosse Plow Co. LX 103-good
797 New Cassady rare box end variety-good
798 Oliver CP 245 pitted
799 Beaver Dam WIS 56 Simplex Inc.-good
800 244 drawbar pin wrench-good
801 Pickering givernor wrench
802 UHT 40-rare/good
803 Simplex Inc 56 Marshfield WIS-good
804 8”Trimo pipe-good
805 7/8” think double op. cast wrench-pitted
806 Wood wrench-good
807 Smith perfect handle 10” ‘s’ handle adjustable-nice
808 Chain belt ½”Milwaukee drilled
809 IHC M238 widened jaws
810 Nice wrench different variety-good
811 Plow clevis no. 2910 pitting
812 Corn planter row marker K413-repaired
813 Case threshing machine 1407 harder to find-jaw crack
814 Unusual fence stretcher-ok
815 Cromna 4 5/8-1” Swedish made-good
816 ICI Handy multi-tool no. 3 good
817 Early cast wrench-good
818 Snider wrench and tool Co. Colorado Springs 1904 pat. –shallow pitting
819 Clipper quick adjust-dings/good
820 Winchester linemans pliers-good
821 6” Trimo pipe wrench-good
822 Mephisto wrench-jaw chip/rare
823 Steger Tulsa Ok. famous 8 in 1-good
824 Part of fence twister-good
825 Thomas Mfg. Farm Multi tool-good
826 Mid-America Eagle grip 8” rare size-good
827 Indian motorcycle wrench-good
828 Click plier fairbury Nebraska rare-good
829 Larock wrench ½” 1915 pat. good
830 Taylor pipe and nut wrench 14”-dings
831 Very rare combo-hammer puller twister and adjustable-very good
832 Indian double box motorcycle wrench-rare
833 New I.D. wrench quick adjust rare-small crack
834 Scarce 5” adjustable-pretty good
835 Indian motorcycle double open end-dings
836 Super grip Iowa 1899 pat. –good
837 Bornsteins pat. 1892 5”-small jaw chip
838 Indian motorcycle adjustable Hendee-good
839 Como pipe wrench 7” smallest como.-rare/some pitting
840 Moline wrench L47-scarce/good
841 Indian motorcycle adjustable Hendee-a little rough,not bad
842 Indian motorcycle scarce type-very good
843 J.D. Mello rare little adjustable wrench-small crack
844 Como pipe wrench Rockford-nice
845 Diamalloy DH16 crescent plier comb.-like new
846 Cast iron tool box 024-pitted
847 Ford car fuel measuring stick from El Dorado Kansas-good
848 Ford car gas gauge-faded
849 Cast iron door knocker-really nice
850 McCormick Deering oil can –no dents or holes/fading paint
851 McCormick hay hoist pulley-good
852 IHC grease cup-nice
853 Janesville Machine Co. cornbox cover-good
854 New era rope maker-good, wrench broken
855 17 ½” Case Eagle post top-nice
856 22 “x10” IHC Stell toolbox-good shape
857 2 man log tongs-nice
858 Cant hook-good
859 Keen Kutter 15” monkey-dings
860 Keen Kutter fencing plier-good
861 Keen Kutter folding square
862 Keen Kutter 10” crescent type-good
863 Elkhart firemans wrench-good
864 Keen Kutter 4” adjustable-good
865 5” Keen Kutter pliers-good
866 Keen Kutter slide lock pliers-good
867 Keen Kutter scissors 8”-good
868 Keen Kutter scissors good 6”
869 Keen Kutter tack puller-good
870 Keen Kutter 8” pipe wrench-good
871 Keen Kutter side cutter-good
872 Keen Kutter monkey 10”-good
873 Keen Kutter 6” pipe wrench-good
874 Keen Kutter 8” adjustable wrench-rough
875 Keen Kutter 6” adjustable wrench-good
876 Renfro Durometer-near new
PICTURES OF INDIVIDUAL LOTS
IND. LOTS 1-8
877 Saw sharpening vice-good
878 Tagoma bumper hitch-good
879 Milt-size plug wrench DW600
880 Owatonna tool co. No. 532 box end wrench
881 Early cast wrench-some pitting
882 Cast farm wrench 2 (like 44 Brown)
883 Unnamed spanner –good
884 Blue Point 59876 Box socket
885 Bandall &Co. Tube flaring clamp
886 Snap-on no. 3 screwdriver
887 Tomoco no. 17 measuring stick wrench-good
888 V34 Valve tool-good
889 Blue Point double nox 59513C ¾
890 Snapon A176 tool-good
891 Snapon 59527
892 Mac 5/8” socket special purpose
893 Mac ¾” socket spec. purpose
894 Planert and Sons sharpening vice
895 Ferguson TO-17014 measuring wrench-good
896 Whitney metal tool co. tool awl-good
897 Snapon S8164-A socket-good
898 Boos Tool Corp. 8” good
899 No. 3 Alligator wrench W&B Co.
900 Bonney vice and tool alligator
901 Bench mtd. sawset unusual-good
902 2 Buggy stands –rusty
903 Hykon Long reach belt drive drill-good
904 Buggy stands
905 7pc. tinners anvil set
IND. LOTS 9-18
IND. LOTS 19-29
IND. LOTS 30-40
IND. LOTS 41-49
IND.LOTS 51-60
IND. LOTS 61-70
IND. LOTS 71-80
IND. LOTS 81-90
IND.LOTS 91-100
IND. LOTS 101-110
IND. LOTS 111-120
IND.LOTS 121-130
IND.LOTS 131-140
IND.LOTS 141-150
IND.LOTS 151-160
IND.LOTS 161-170
IND.LOTS 171-176
IND.LOTS 177-180
IND.LOTS 181-182
IND.LOTS 183-190
IND.LOTS 191-200
IND.LOTS 201-210
IND.LOTS 211-220
IND.LOTS 221-230
IND.LOTS 231-240
IND.LOTS 241-250
IND.LOTS 251-260
IND.LOTS 261-270
IND.LOTS 271-280
IND.LOTS 281-282
IND.LOTS 283-285
IND.LOT 286
IND.LOT 287
IND.LOT 288
IND.LOT 289
IND.LOTS 290-292
IND.LOTS 293-295
IND.LOTS 296-300
IND.LOTS 301-310
IND.LOTS 311-320
IND.LOTS 321-330
IND.LOTS 331-340
IND.LOTS 341-350
IND.LOTS 351-360
IND. LOTS 361-370
IND.LOTS 371-380
IND.LOTS 381-390
IND.LOTS 391-400
IND.LOTS 401-410
IND.LOTS 411-420
IND.LOTS 421-430
IND.LOTS 431-440
IND.LOTS 441-450
IND.LOTS 451-460
IND.LOTS 461-470
IND.LOTS 471-480
IND.LOTS 481-490
IND.LOTS 491-500
IND.LOTS 501-510
IND.LOTS 511-520
IND.LOTS 521-530
IND.LOTS 531-540
IND.LOTS 541-550
IND.LOTS 551-561
IND.LOT 562
IND.LOT 563
IND.LOT 564
IND.LOT 565
IND.LOT566
IND.LOTS 567-568
IND.LOT 569
IND.LOTS 570-577
IND.LOTS 578-579
IND.LOT 580
IND.LOTS 581-590
IND.LOTS 591-600
IND.LOTS 601-610
IND.LOTS 611-619
IND.LOT 620
IND.LOTS 621-625
IND.LOT 626
IND.LOTS 627-630
IND.LOTS 631-640
IND.LOTS641-650
IND.LOTS 651-660
IND.LOTS 661-670
IND.LOTS 671-680
IND.LOTS 681-683
IND.LOTS 684-686
IND.LOTS 687-689
IND.LOTS 690-694
IND.LOTS 695-700
IND.LOTS 700-704
IND.LOTS 705-708
IND.LOTS 709-711
IND.LOTS 712-715
IND.LOT 716
IND.LOTS 717-719
IND.LOTS 720-720D
IND.LOT 721
IND.LOTS 722-723
IND.LOTS 724-726
IND.LOTS 727-728
IND.LOTS 729-730
IND.LOTS 731-733
IND.LOTS 734-740
IND.LOTS 741-750
IND.LOTS 751-760
IND.LOTS 761-770
IND.LOTS 771-780
IND.LOTS 781-790
IND.LOTS 791-800
IND.LOTS 801-810
IND.LOTS 811-820
IND.LOTS 821-830
IND.LOTS 831-840
IND.LOTS 841-850
IND.LOTS 851-856, 859-860
IND.LOTS 857-858
IND.LOTS 861-870
IND.LOTS 871-880
IND.LOTS 881-890
IND.LOTS 891-901
IND.LOTS 902,904
IND.LOTS 903,905
BOX LOTS 1-4
BOX LOTS 5-8
BOX LOTS 9-12
BOX LOTS 13-16
BOX LOTS 17-20
BOX LOTS 21-23
BOX LOTS 24-27
BOX LOTS 28-31
BOX LOTS 32-35
BOX LOTS 36-39
BOX LOTS 40-43
BOX LOTS 44-47
BOX LOTS 48-51
BOX LOTS 52-54
BOX LOTS 55-57
BOX LOTS 58-61
BOX LOTS 62-65
BOX LOTS 68-69
BOX LOTS 70-73
BOX LOTS 74-77
BOX LOTS 78-81
BOX LOTS 82-84
BOX LOTS 85-86
THE END
