SurfLink Media – Set-up Made Easy Product Availability

Debut Wireless iStream Wireless

Source Wireless

 

   June  2012  

     

Enabling SurfLink Media in Inspire 1. Click on Wireless/Accessories on the left navigation bar

2. Check the Enable SurfLink Media box

Ø Enable the SurfLink Mobile or SurfLink Remote to allow for manual Start/Stop of

Audio Stream

Ø If enabling the SurfLink Remote, enter the SurfLink  Remote  Address  (located  on  

the  back  of  the  SurfLink  Remote)  into  the  Sync  hearing  aids  dialog  box  and  click  Sync

3. Enable Streaming per memory via the checkbox

Ø If unchecked, streaming via the SurfLink Media is not available in that memory

Ø SurfLink Mobile still provides Surround, Focus, Wired or Bluetooth streaming at programmed attenuation level

4. Set the Hearing Aid Microphone Setting While Streaming in each active memory

SurfLink Media Back View 1. Offers a variety of A/V connection options:

Ø Standard: RCA jacks

Ø Optional: Microphone, S/PDIF, Optical TOSLINK

2. Ensure the Monaural/Binaural selection switch is positioned

appropriately

Ø If fit monaurally, select the monaural position

Ø If fit binaurally, select the binaural position

3. Connect power supply

Ø A micro-USB power cable is supplied. Insert the micro-USB connector into the Power port on the SurfLink

Media and connect the opposite end to the power outlet.

SurfLink  Media  Back  View  

SurfLink Accessory Sync Code

SurfLink  Remote  and  Media  Set-­‐up  in  Inspire  Double  click  to  play  movie  

SurfLink  Mobile  and  Media  Set-­‐up  in  Inspire  Double  click  to  play  movie  

 

SurfLink Media – Set-up Made Easy Product Availability

Debut Wireless iStream Wireless

Source Wireless

 

   June  2012  

     

SurfLink Media User Controls 1. Press on the power button

2. Adjust the streaming activation range to set the distance where a

streaming session begins

3. Set the volume control of the audio device to a level that is comfortable

for the person without hearing loss

4. Set the volume control of the SurfLink Media to a level that is comfortable

for the person with the hearing aids

5. Adjust the volume level as needed using the SurfLink Remote

SurfLink  Media  Front  View