Upload
lythuan
View
224
Download
0
Embed Size (px)
Citation preview
AusRAIL 2013 Rail SupplieRS NetwoRk auStRalaSia DiRectoRyAUSRAIL PLUS 2013, 26-28 November, Sydney convention centre
© Commonwealth of Australia
This work is copyright. Apart from any use as permitted under the Copyright Act 1968, no part may
be reproduced by any process without prior written permission from the Commonwealth. Requests
and inquiries concerning reproduction and rights should be addressed to the Department of
Industry, GPO Box 9839, Canberra ACT 2601.
Disclaimer:
“The Australian Government as represented by the Department of Industry, and on behalf of the
Rail Suppliers Network Australasia, the NSW Government Department of Trade and Investment,
the Australasian Railway Association, the Australian Trade Commission and the Industry Capability
Network (‘the collaborating parties’), has exercised due care and skill in the preparation and
compilation of the information and data in this publication. Notwithstanding, the Commonwealth
of Australia, its officers, employees, agents and the collaborating parties disclaim any liability,
including liability for negligence, loss howsoever caused, damage, injury, expense or cost incurred
by any person as a result of accessing, using or relying upon any of the information or data in this
publication to the maximum extent permitted by law. No representation expressed or implied is
made as to the currency, accuracy, reliability or completeness of the information contained in this
publication. The reader should rely on their own inquiries to independently confirm the information
and comment on which they intend to act.”
ISBN 978-1-925092-09-7
AusRAIL 2013 Rail SupplieRS NetwoRk auStRalaSia DiRectoRyAUSRAIL PLUS 2013, 26-28 November, Sydney convention centre
Proudly supported by:
“This directory has been developed as a platform for the firms participating on the Rail Suppliers Network Australasia (RSNA) stand at AusRAIL Plus
2013 to provide introductory information about their work to event participants. The information in the directory has been provided by the participating
firms and has not been independently verified by the event supporters. The directory is intended to complement the participating firms’ attendance at
AusRAIL Plus 2013 as a way to advertise their services and provide attendees with contact information which may be useful after the event.”
4 RAIL INDUSTRY CAPABILITY DIRECTORY
The Services Offering
The RSNA services have been developed based on its mission statement
that says “The Rail Suppliers Network Australasia seeks to ensure the
continuity, growth, strength and success of the rail supply industry in
Australia and New Zealand.” This will be achieved through:
• Facilitating access to business opportunities in the local and
international markets;
• Providing advice to companies who wish to develop their activities
within the market and access government’s grants, financial services
and export assistance;
• Facilitating opportunities for companies to present their services to
other organisations; and
• Facilitating opportunities for companies to form technology or
service based clusters for both local and international market.
RAIL SUPPLIERS NETWORK AUSTRALASIA
4
The Australasian Railway Association (ARA) is pleased to announce
the establishment of the Rail Suppliers Network Australasia (RSNA),
formerly known as the Australasian Rail Industry Small Enterprises Group
(ARISEG).
The new look and feel came as a result of the group conducting a
customers’ survey in order to develop a new strategy that better serves the
needs of small to medium enterprises in the rail industry.
The new logo reflects a fresher look displaying cogs in different sizes
and colours representing different sizes and types of business in the rail
industry that work together to drive the industry.
The new direction is categorised into a four-part-framework below.
1. Globally competitive, at home and abroad.
2. Understanding the supply chain and resolving complexities.
3. Clustering approach and innovation.
4. Political advocacy.
5
Australian manufacturing is changing. It is
important, more than ever, to secure our industry’s
future in areas of new and improved opportunities.
I have been working on behalf of Government, to
ensure Australian rail firms are prepared to meet
global challenges by focusing on areas of our
competitive advantage. Supporting firms with
world-leading technologies has been key in helping
ensure the rail sector can meet the future needs of
the global industry. It is those Australian rail firms
that will help position the industry for growth.
Many of these innovative Australian firms are on display at the Rail Suppliers
Network Australasia pavilion at this year’s AusRAIL conference.
On the pavilion, Australian firms will be showcasing their cutting edge
solutions around advanced manufacturing, monitoring and management
and power and propulsion. These are the key areas of the Australian rail
industry’s competitive advantage, according to the On Track to 2040
technology roadmap. The firms will be demonstrating how they are aligning
with these priority areas to supply the high value-add capabilities needed to
drive our manufacturing industry’s future.
This is a pavilion dedicated to the future enhancement of the Australian
rail manufacturing sector, backed by both industry and government. It
represents an incredible collaborative effort in support of the sector with
support from the Federal Department of Industry, NSW Department
of Trade and Investment, Regional Infrastructure and Services, the Rail
Suppliers Network Australasia, the Australasian Railway Association,
Austrade and the ICN.
I look forward to welcoming you on the pavilion to discover the wide variety
of capabilities our Australian firms have on display.
Bruce Griffiths OAM
Rail Supplier Advocate
The Rail Suppliers Network Australasia pavilion is located at Hall 2,
Stand 196 at the Sydney Convention and Exhibition Centre.
For further information on the Rail Supplier Advocate initiative visit:
www.industry.gov.au/supplieradvocates
RAIL SUPPLIER AdvOcATE fOREWORd
7
Rail Suppliers Network Australasia 4
Rail Supplier Advocate Foreword 5
Contents 7
Austbreck 8
Australian Rail Technology 9
Austrak 10
Battery Energy Power Solutions 11
Bay Rail Consulting 12
Capacitor Technologies 13
Chassis Brakes International (AU, ASEAN) 14
Faiveley Transport Australia Ltd 15
Futuris 16
Harrybilt Engineering & Welding Services 17
Inconmat Australia 18
iOmniscient 19
LaserBond 20
Marciano Industries 21
Meridian Engineers 22
MRX Technologies 23
Northern Fencing Specialists 24
OEM Technology Solutions 25
Plaskona Industries 26
Power Flex Cables 27
RPC Technologies 28
Sitemed 29
Trakblaze Global 30
TTG Transportation Technology 31
Supporting Agencies
The Australasian Railway Association (ARA) 32
The Australian Trade Commission 32
Enterprise Connect 33
Industry Capability Network (ICN) 33
The Commonwealth Scientific and Industrial Research Organisation 34
NSW Trade & Investment 34
cONTENTS
8 RAIL INDUSTRY CAPABILITY DIRECTORY
cAPABILITIES
Australian and New Zealand rail market leader in:
- Pantograph manufacture
- Pantograph and pan head repair and overhaul
- Overhead line equipment
- Solid conductor rail (fixed and moveable).
• Australian manufacturing base.
• Melbourne and Sydney operations with field service capability.
• Global technical reach through Fandstan Electric Group.
• Proven technology integrator with solution based focus.
dIScRIMINATORS
• More than thirty years operating experience in local markets.
• Development of in-house expertise, engineering and support.
• Whole of life cost focus for maintenance and design -
- Availability
- Reliability
- Optimisation
- Incidence prediction
AUSTBREcK PTy LTd Austbreck is a market leader in the manufacture of pantographs and rail electrification equipment
QUALITy APPROvALS/AWARdS
• AS/NZS9001:2008 certificate 7105 certified by BSI.
• Winner 2010 RBA Engineering Excellence Award: PANDAS system.
cONTAcT/AddRESS dETAILS
Austbreck Pty Ltd
34-36 Westpool Dr, Hallam, VIC 3803, Australia
Phone: +61 3 9702 4011
1/3A Alexander Street, Auburn, NSW 2144, Australia
Phone: +61 2 9644 4888
Email: [email protected]
Web: www.austbreck.com.au
KEy cUSTOMERS
• Alstom
• Bombardier Transport
Australia
• Downer Rail
• John Holland/GHD
• Rotem
• United Group Rail and UGL
Unipart
• Yarra Trams
KEy PARTNERS
• Fandstan Electric Group:
- Brecknell Willis
- Stemmann Technik
• Authorised representation,
with technical support for:
- Arthur Flury AG
- Furrer + Frey AG
- Transmission Dynamics
- Gevea
9
cAPABILITIES
As a supplier of premium technology, ART have designed, manufactured
and supplied over 1000 high density relay sub rack control systems
(containing 54,000 relays) and over 600 HV earthing switches
(destructively tested to 30,000Amps) and HV junction boxes to Sydney
Trains for the Waratah Train Project.
• System and technology integrators of complex rolling stock electrical
and infrastructure systems.
• Innovative fit for purpose solutions, end to end delivery.
• Equipment repairs, upgrades and overhauls.
• Design, manufacture and supply custom electronic, mechanical and
electromechanical equipment.
dIScRIMINATORS
• 100% Australian owned and over 30 years of experience.
• Proven track record of design, manufacture and delivery.
- Recent projects include design and install of ETCS, ATP and DTRS.
• Fast response with local support as well as global reach.
• Wide range of engineering disciplines - electrical, electronic,
mechanical and electro-mechanical.
• Range of engineering tools; CAD, FEA, sectional wire crimp analysis,
ensure all designs are fit for purpose.
• Extensive range of innovative products proven over many years of
field service.
AUSTRALIAN RAIL TEchNOLOgyAustralian Rail Technology (ART) supply premium electronic, mechanical and electromechanical equipment and technology
QUALITy APPROvALS/AWARdS
• ISO9001:2008 Certified by Davis Langdon.
• Defence Approved Supplier NCAGE ‘Z0LC3’.
• Enterprise Connect SCIP participant.
• Continuous Improvement Programs.
• LEAN management manufacturing principles.
• AEO Accreditation - commenced.
cONTAcT/AddRESS dETAILS
Garry Lougher
Australian Rail Technology
Head Office and Factory (Sydney) also in Melbourne and Perth
10 Brennan Close, Asquith, NSW 2077, Australia
Phone: +61 2 9482 5710
Fax: +61 2 9482 5726
Web: www.ar-tech.com.au
KEy cUSTOMERS
• Downer Rail
• Perth Transport Authority
• Queensland Rail
• Aurizon
• Transport for
New South Wales
• Metro Trains Melbourne
• Pacific National
• United Group Rail
• Sydney Trains
KEy PARTNERS
• Esterline Leach
• Image House
• Galland
• MTM Power
• Lanfranco
• Mafelec
• EKE electronics
• Leonards Electronics
• Omnia
• Rebosio
10 RAIL INDUSTRY CAPABILITY DIRECTORY
cAPABILITIES
Austrak is a dedicated concrete sleeper manufacturer that:
• Designs sleepers and factories
• Designs machines and equipment for sleeper manufacture
• Builds factories for sleeper manufacture
• Manufactures sleepers, turnout bearers, road crossing panels and
masts
• Manages logistics
dIScRIMINATORS
• Australia’s largest supplier of concrete sleepers and a leading supplier
of heavy-haul sleepers globally.
• Produced in excess of 18 million sleepers and has built 12 factories
from which it operates.
• Austrak offers flexible client-oriented solutions including:
- Sleeper design
- Sleeper supply
- Factory technology.
AUSTRAK PTy LTdAustrak has more than 10 years experience in providing clients with safety, certainty and engineering excellence
KEy cUSTOMERS
• Queensland Rail
• Fortescue Metals Group
• BHP Billiton
• Rio Tinto
• MTM
• V/Line
• ARTC
KEy PARTNERS
• Laing O’Rourke
QUALITy APPROvALS/AWARdS
• AS/NZS ISO 9001:2008 QMS certification
• AS/NZS ISO 14001:2004 EMS certification
• AS/NZS 4801:2001 SMS certification
cONTAcT/AddRESS dETAILS
Grant Steel
Business Development Manager
GPO Box 5094, Brisbane, QLD 4001, Australia
Phone: +61 7 3308 7880
Email: [email protected]
11
cONTAcT/AddRESS dETAILS
Battery Energy Power Solutions Pty Ltd
96 Fairfield Street, Fairfield, NSW 2165, Australia
Phone: +61 2 9681 3633
Fax: +61 2 9632 4622
Email: [email protected]
Web: www.batteryenergy.com.au
BATTERy ENERgy POWER SOLUTIONS PTy LTdBattery Energy Power Solutions design and manufacture world class performance batteries
cAPABILITIES
• Design and manufacture world class performance batteries for more
than 26 years.
• CSIRO collaboration.
• RailGEL batteries specific for starting, control and lighting batteries
for rolling stock applications.
• EnerGEL and SunGEL batteries for trackside signalling,
communications and telemetry applications.
• Scalable and flexible manufacturing capability.
• Design and manufacture battery enclosures and trays.
• Full in-house CAD/CAM design capability.
• Experienced staff.
dIScRIMINATORS
• Products designed for critical applications.
• Batteries designed for extended life at elevated temperatures.
• Batteries tested to IEC standards.
• Products designed to withstand rolling stock vibration.
• Committed long-term focus on the rail industry.
• Supplying gel batteries to the rail industry for more than 15 years.
KEy cUSTOMERS
• Downer Rail
• UGL Rail
KEy PARTNERS
• CVC Limited
• CSIRO
QUALITy APPROvALS/AWARdS
• ISO9001
• Australia Technology
Showcase Award
12 RAIL INDUSTRY CAPABILITY DIRECTORY
cAPABILITIES
• Bay Rail Consulting have a
wide range of engineering
design and consulting
expertise in a variety of
industries including:
- Rail
- Defence – NATO certified
supplier
- Oil and Gas
- Automotive
- Engines
- Petrochemicals
- Veterinary
- Pressure vessels
• Their rail experience in
consulting engineering and
design services in the UK,
Europe and Australia include:
- High speed trains
- Light rail
- Metro
- Rapid transit
- Suburban single deckers
- Suburban double deckers
- Interurban double deckers
- Locomotives
- Stainless steel – (Budd)
- Signalling and track
QUALITy APPROvALS/AWARdS
• Certified NATO supplier
cONTAcT/AddRESS dETAILS
Peter Walker
Director
Bay Rail Consulting
PO Box 42, Beecroft, NSW 2119, Australia
Phone: +61 450 117 360
Fax: +61 2 9484 5447
Email: [email protected]
Web: www.bayrailconsulting.com
BAy RAIL cONSULTINgBay Rail Consulting provide engineering design and consulting expertise
dIScRIMINATORS
• Bay Rail Consulting’s wide ranging field of engineering design
expertise sets them apart from the average industry consultant and
allows them to design and consult on anything from aircraft engines,
pressure vessels and high speed train structures from scratch.
• Rail has given Bay Rail Consulting the ability to apply this broad
appreciation of the engineered world so that clients can rest assured
that their report/design/review/analysis does not reflect just a view
from inside one industry.
13
cAPABILITIES
• CapTech employs state of the art technology and is dedicated to
continual product development and customer satisfaction.
• CapTech services all areas of Australia as well as having worldwide
offices.
• In house design and manufacturing, servicing and support.
• Exclusive representative of BENDER in Australia.
• Support from Bender German – the manufacturer.
• Engineering and manufacturing office in Melbourne.
dIScRIMINATORS
• Customers receive a quality German engineered product.
• Customers receive exceptional local technical support.
• Bender Germany has approximately 80 staff dedicated to the
continual ongoing development and improvement of the product
range to be ahead of the next developments in technologies.
• Exceptional know how and experience by testing on some of the
toughest environments such as Formula 1 cars with extremes in
temperature, vibration and inertia forces.
• Products include a five year warranty that highlights German quality.
KEy cUSTOMERS
• Queensland Rail
• British Railway
• Australian Submarine Corporation
• Australian NAVY
• Joy Mining Machinery
KEy PARTNERS
• AmpControl
• BENDER
QUALITy APPROvALS/AWARdS
• ISO9001: 2008 Certified by SAI Global.
cONTAcT/AddRESS dETAILS
John Piovesan - National Sales Manager
George Kotenko - Engineering Specialist
Capacitor Technologies Pty Ltd
13/40 Edina Rd, Ferntree Gully, 3156 VIC, Australia
PO Box 240, Ferntree Gully BC, 3156 VIC, Australia
Phone: +61 3 9758 5866
Fax: +61 3 9752 2067
Email: [email protected]
Email: [email protected]
Web: www.captech.com.au
cAPAcITOR TEchNOLOgIES PTy LTd Capacitor Technologies (CapTech) is an Australian owned company with local design and manufacturing facilities
14 RAIL INDUSTRY CAPABILITY DIRECTORY
chASSIS BRAKES INTERNATIONAL (AU, ASEAN)Chassis Brakes International provides engineering, testing and manufacturing services
cAPABILITIES
• Engineering Services
- Product design through to prototype manufacture.
- Design analysis, optimisation and simulation.
- Electro mechanical equipment design and manufacture.
- Manufacturing process design and implementation.
• Testing Services
- Corrosion, environmental, vibration and NVH dynamometer testing.
- Durability, fatigue, pressure and strength testing including full
vehicle testing.
• Manufacturing
- Cast Iron.
- Cast Aluminium.
- Forging.
- Precision machining and assembly.
- Plating and painting.
- Additional equipment and capabilities.
dIScRIMINATORS
• Full vertical integration providing complete control of your product.
• Full engineering service and support of all products not just “make to
print”.
• Globally competitive pricing and quality from a company
benchmarked by Toyota.
• Experts in light weighting using Aluminium.
• Local company with global reach.
cONTAcT/AddRESS dETAILS
Mark Blackburn
Chassis Brakes International
246 East Boundary Rd, East Bentleigh, VIC 3165, Australia
Phone: +61 3 9575 2499
Email: [email protected]
Web: www.chassisbrakes.com
KEy cUSTOMERS
• Toyota
• Ford
• Holden
• Delkor
QUALITy APPROvALS/AWARdS
• Accredited to ISO 9001, ISO
14001 and TS16949
15
cAPABILITIES
• Design, manufacture, supply and maintenance of complex rolling-
stock systems and equipment.
• Systems and equipment for Passenger Trains, Locomotives and
Freight Wagons.
• Systems include:
- Brake Systems
- HVAC Systems
- Passenger Access Door Systems
- Pantographs
- Coupler Systems
- CCTV, Passenger Information Systems and Data Loggers
• Maintenance capabilities including the repair and overhaul of
equipment, spare parts provision, logistics management and in-field
services.
• Locations through-out Australia and New Zealand, including Sydney,
Melbourne, Perth and Wellington.
dIScRIMINATORS
• Global capabilities delivered through a local market oriented network.
• Truly local approach, with sites throughout the country, providing
services to our customers where they need them.
• Leading edge technology, delivering exceptional functionality and
reliability.
• Full through-life support for systems and products, from design and
delivery through to maintenance and disposal.
fAIvELEy TRANSPORT AUSTRALIA LTdFaiveley is the number one global on-train equipment supplier, providing customers with quality products and service
QUALITy APPROvALS/AWARdS
• AS/NZS ISO 9001:2008 Certified by SGS
• AS/NZS 4801:2001 Certified by SGS
cONTAcT/AddRESS dETAILS
Harry Hanegraaf
Customer Relationship Manager
Faiveley Transport Australia Ltd
Phone: +61 3 8638 2318
Mobile: +61 (0) 406 380 035
Email: [email protected]
Web: www.faiveley.com
KEy cUSTOMERS
• Bombardier Australia
• United Group Ltd Rail
• Public Transport Victoria
• Hyundai Rotem
KEy PARTNERS
• The Faiveley Transport Group
- a truly global company with
more than 40 sites in more than
25 countries around the world
16 RAIL INDUSTRY CAPABILITY DIRECTORY
cAPABILITIES
• Manufacture and assemble rail seating and interiors.
• Global product sourcing.
• Full test and validation capability.
dIScRIMINATORS
• Long term supplier to Australian Automotive Industry.
• Global sourcing reach.
• Strong Australian based engineering.
• In-house testing and validation.
• Design for purpose low volume capability.
fUTURIS Full internal design and development capabilities for rail interiors and seating systems
KEy cUSTOMERS
• Queensland Rail Cairns Tilt Train Project
• Bombardier
KEy PARTNERS
• NHTV (China)
QUALITy APPROvALS/AWARdS
• 2012 Frost & Sullivan Asia Pacific Automotive Seating Award
Technology innovation award for composite seat material.
• 2011 Victorian Manufacturing Hall of Fame Award
Inducted for “sustained contribution to manufacturing excellence”.
• 2010 Government of South Australia Safe Work Award
Employer of the Year (private sector).
• 2010 SAE Australia Automotive Excellence Award
Silver innovation award for composite seat frame development.
cONTAcT/AddRESS dETAILS
Sefton Williams
80 Turner St, Port Melbourne, VIC 3207, Australia
Mobile: +61 413 884 241
Email: [email protected]
Web: www.futurisautomotive.com
17
cAPABILITIES
• Harrybilt Engineering specialises in the design and fabrication of
innovative equipment for rail, transport, infrastructure, general
commercial and individual applications.
• Manufacture rail guidance systems for excavators (wheel & track)
and trucks.
• Manufacture rail maintenance and sleeper handling equipment that
facilitate the efficient maintenance of rail infrastructure saving time
and costs.
• Provide high quality manufacturing outcomes for commercial and
individual clients.
dIScRIMINATORS
• On site road/rail vehicle compliance testing facility.
• Rail maintenance equipment designed to Australian standards,
including recent RISSB standards and proven in Australian conditions.
• Employ specialised staff including hydraulics technicians, qualified
engineering fabricators and a qualified mechanical engineer.
• Manufacturer of a multi network compliant triple gauge Hi Rail system
with automatic twist lock.
hARRyBILT ENgINEERINg & WELdINg SERvIcESSmart innovative engineering solutions for rail, infrastructure, commercial and individual applications
cONTAcT/AddRESS dETAILS
Russell Hunter
Mechanical Engineer
Harrybilt Engineering & Welding Services
10 Golden Cr, Ballarat, VIC 3350, Australia
Phone: +61 3 5339 4859
Fax: +61 3 5339 9419
Email: [email protected]
Web: www.harrybilt.com.au
KEy cUSTOMERS
• Downer EDI Works – Rail
• McConnell Dowell
• Powercor Australia
• Aurizon
• Hitachi, Hyundai, Komatsu
• Independent contractors
including Earthtrack, Coleman
Rail, McLeod Rail, Goldcon
Constructions
KEy PARTNERS
• Supporting many local
suppliers including Ballarat
Pressings and Clark Precision
Engineering
QUALITy APPROvALS/AWARdS
• Railcorp and METRO Certified
to provide Road/Rail Vehicle
Compliance Testing
• Member of Australasia Railway
Association
• Board member of Rail
Suppliers Network Australasia
18 RAIL INDUSTRY CAPABILITY DIRECTORY
cAPABILITIES
• V-Rod Composite Reinforcing bar that will never rust or corrode and
electromagnetic neutral. Suitable for a variety of applications including:
- Light rail, electromagnetic neutral, hearing loops etc
- Power stations, no stray current, no need to earth
- Smelter pot lines no loss of power to earth
- Marine structure such as wharfs, boat ramps jetties
- Sewer plants
- Piling
- Military faculties, ammunition bunkers, no stray currents
• Smooth V-Rod FRP load transfer dowels
• Micro Hydrophilic Nylon concrete shrinkage fibres
• Specialized concrete water proofing systems
• Full design assistance and solutions that represent whole of life value
dIScRIMINATORS
• Premier Australian provider of engineered FRP concrete reinforcing
solutions, Electromagnetic and Corrosion free reinforcing bars.
• Sustainability through reduced manufacturing embodied energy and
reduced life cycle.
• V-Rod recently used in Kingston, Canada to build and evaluate a
section of new monorail test track, in cooperation with Bombardier
Transportation’s System Division
INcONMAT AUSTRALIASupplier of a range of unique durable products to meet construction needs
KEy cUSTOMERS
• McConnell Dowell
• Ausgrid
• Australian Nuclear Science
• Maritime Construction
• Boral De Martin & Gasparini
• RMS and Waterway Construction Sydney Harbour works
• Port Adelaide Enfield Council
KEy PARTNERS
• Pultrall Inc-Canada
• IRC Pty Ltd
QUALITy APPROvALS/AWARdS
• Synergy Award for Innovation by the Natural Sciences and
Engineering Research Council of Canada (NSERC)
• ISO9001 Certification (since 2003)
• TS16949 Certification (since 2009)
• ISO14000 Certifications (in progress)
cONTAcT/AddRESS dETAILS
Darren Lutze
Inconmat Australia
240 Victoria Road, Largs Bay, SA 5016, Australia
Phone: +61 8 8445 2233
Fax: +61 8 8445 8233
Email: [email protected]
Web: www.inconmat.com.au
Web: www.vrodaustralia.com.au
19
cAPABILITIES
• Technology leader in providing Video Analytics and Surveillance
Solutions since 2001.
• Most comprehensive suite of Video Analytics Systems - Detection,
Recognition and Automated Surveillance Systems (convergence).
• Unmatched Advanced Analytics system capable of analysing realistic,
complex and extremely crowded spaces using internationally patented
technologies.
• Numerous applications including Facial recognition in a crowd, object
detection in a crowd, multi-lingual License Plate Recognition and
detection of unusual people behaviours.
• Industry specific solutions for more than 30 industries ranging from
Airports and Railways to Oil Refineries and Traffic Management.
dIScRIMINATORS
• Sound and Smell analytics for specific applications.
• All systems armed with the Artificial Intelligence based Nuisance
Alarm Minimization System (NAMS) to help eliminate false alarms.
• Over 35,000 licenses sold to customers in many industries around the
world.
• Tailored modules for Rail safety and security:
- Platform Safety - Tunnel Safety - Rail yards - Level Crossings / Grade
Crossings
- Track Protection and Maintenance
- Protection of High Value Assets
- Concourse and external bus/
taxi interchange and more.
iOMNIScIENT PTy LTdiOmniscient provide video analytics and surveillance solutions
QUALITy APPROvALS/AWARdS
• IFSEC 2011 – Best CCTV System of the year
• Zenith Pace Awards – Mining, Minerals and Exploration category
• Winner – Global Security Challenge for Crowded Scenes 2011
• Australian Engineering Excellence Award 2010
• International Patent for Non-Motion detection
cONTAcT/AddRESS dETAILS
Mr Colin Wong
iOmniscient Pty Ltd
Level 9, 815 Pacific Highway, Chatswood, NSW 2067, Australia
Phone: +61 2 9411 7776
Fax: +61 2 9499 5357
Email: [email protected] and [email protected]
Web: www.iomniscient.com
KEy cUSTOMERS
• University of San Francisco
• Canberra Airport
• Rail yard facility, Canada
Perimeter protection
• Indonesian Immigration
• Chicago Transit Authority
• Roads and Maritime Services,
Wollongong, Australia/Traffic
management
KEy PARTNERS
• Siemens
• Microsoft
• Thales
• Oracle
• Honeywell
• EMC
• Motorola
20 RAIL INDUSTRY CAPABILITY DIRECTORY
LaserBond reclaims fatigued and worn industrial parts whilst improving
the resistance to wear and corrosion, increasing reliability and service life.
New components and replacement parts are surface engineered to provide
extended service life in a range of challenging environments and applications.
cAPABILITIES
• Laser cladding – 8 Axis Robotic Laser System capable of cladding
complex geometries and internal bores. Can handle up to 6100mm
long x 2000mm diameter & 15 ton.
• Thermal spraying – 7 Axis Robotic System capable of coating
complex geometries and internal bores. Can handle components up to
6100mm long x 2000mm diameter & 15 ton.
• full machine shop - CNC Lathes (7), CNC Horizontal Borer and Mill,
CNC Vertical Mills (2), CNC Horizontal Machining Centre, Vertical Borer,
Horizontal Borers (2), Centre Lathes (11), Mills (5), Cylindrical Grinders (4),
Surface Grinders (2), Internal Grinders (2), Cylindrical Superfinishers (2).
dIScRIMINATORS
• In house laboratory equipped to carry out testing and examination,
including metallographic characterisation, hardness testing and
chemical analysis.
• Scanning Electron Microscope (SEM) allows investigation of coatings
and metallurgy down to the nano scale. The lab is routinely used for
the optimisation of coatings, quality control of incoming materials,
reports to clients on new applications and materials, and failure
analysis as required.
• Portable Coordinate Measuring Machine for precise measurements
and reverse engineering projects.
• Wealth of experience with: 12 years of laser cladding and 20 years of
thermal spraying.
LASERBONd LTd Surface engineering, reclamation and manufacturing
KEy cUSTOMERS
• Weir Minerals
• Joy Global
• Queensland Alumina Limited
• Aurizon (Formerly Queensland Rail)
• Downer
• Blue Scope Steel
• Samcon Engineering
QUALITy STANdARdS ANd OThER AccREdITATIONS
• ISO 9001:2008
• Winner of NSW Government’s Western Sydney Industry Award for
Innovation
AddRESS/cONTAcT dETAILS
Ajith Ranasinghe
Sales Engineer
LaserBond Ltd
2/57 Anderson Road, Smeaton Grange, NSW 2567, Australia
Phone: +61 2 4631 4500
Fax: +61 2 4631 4555
Mob : +61 417 618 512
Email: [email protected]
Web: www.laserbond.com.au
21
cAPABILITIES
• Knowledge with a skilled workforce and investment in the latest state
of the art Amada CNC machinery.
• State of the art flatbed Amada lasers.
• State of the art Amada Rotary head lasers.
• CNC lasers/benders and punches.
• Multiple manufacturing locations.
• Project management.
• Sheetworks/solidworks and tubecam software integrated machinery.
• Amada spot welding capability.
• Fleet of trucks and transport vehicles.
dIScRIMINATORS
• Marciano Industries has expanded to operate from three large modern
facilities.
• Marciano Industries offers services from 3D design to manufacturing.
• Experience and knowledge has seen Marciano Industries become a
key supplier for the rail industry in producing and designing a range
of products for both the passenger and freight locomotive sectors,
ranging from manufacturing of parts, to supply of major locomotive
components.
• Marciano Industries specialises in double skinned self-ventilating
signaling cabinets and retro fit kits.
• Marciano Industries provide rapid prototyping, 3D modelling, lean
and rapid manufacturing processes and concept design abilities.
MARcIANO INdUSTRIESMarciano Industries has 30 years of industry experience in offering specialised services for metal manufacturing solutions
cONTAcT/AddRESS dETAILS
Mervyn Sayers
National Sales and Marketing Manager
Marciano Industries
Mobile: +61 0409 220 868
KEy cUSTOMERS
• UGL Engineering
• Downer EDI Rail
• RailCorp
• Speno Rail
• John Holland Group
• Siemens Rail
• Bombardier
KEy PARTNERS
• RailCorp
• UGL
• Speno Rail
• Downer EDI Rail
QUALITy APPROvALS/AWARdS
• ISO9001:2008 Accredited
• SCIP Program Member
22 RAIL INDUSTRY CAPABILITY DIRECTORY
cAPABILITIES
• We have approximately 150 installations in Australia, the United
Kingdom and New Zealand.
• Meridian Engineers currently offer the following products:
- Train Loadout Improvement systems (TLI).
- In-motion train weighing from 0 – 100kph.
- Bin weigh indication systems.
- Train speed and positioning systems.
- Loading control systems.
- Bolt–on structural load cells.
- In-motion truck weighing.
dIScRIMINATORS
Australian designed and manufactured hardware and software.
• Weighbridges:
- Patented bolt on transducer technology that is trade approved in
Australia and Europe.
- Low installation costs (no weighbridge hut required).
- Low maintenance and easy replaceable load cells.
- Low power consumption 40 watts per basic weighbridge.
• TLI Systems:
- Can be retro fitted to existing steel bins.
- Accurate wagon loading (+- 1% of target).
- Extremely accurate train loading (total train loads within +/- 0.1% of
target).
MERIdIAN ENgINEERS PTy LTd Meridian Engineers is one of Australia’s most innovative train weighing companies with a reputation for leading-edge technologies
cONTAcT/AddRESS dETAILS
Unit 9, 50 Howe Street, Osborne Park, WA 6017, Australia
Phone: +61 8 9278 6000
Fax: +61 8 9278 6001
Email: [email protected]
Web: www.meridianengineers.com.au
KEy cUSTOMERS
• BHP Billiton Iron Ore
• FMG
• Aurizon
• QR Queensland Rail
• Whitehaven Coal
• Brookfield Rail
• GrainCorp
• Glencore Xstrata
• RioTinto Coal
• Allied
QUALITy APPROvALS
• Our bolt on system has
received NMI pattern approval
as suitable for trade use
-6/10B/71
• Our bolt on system has
received EU pattern approval
for trade use – NWML
UK/0126/0043
AWARdS
• Australian Bulk Handling
Award Winner 2011.
23
cAPABILITIES
• Vehicle equipment monitoring systems:
- Wheel, brake and pantograph wear monitoring.
- Vision inspection systems.
- Out of gauge measurement.
- Ovality detection.
• Track measurement systems:
- Rail profile monitoring.
- Overhead wire measurement.
- Rail surface crack detection.
- Track geometry measurement.
- Vision inspection systems.
• Driver assist technologies:
- Dumper automatic spotting of locomotive.
- Vehicle location monitor.
- Cruise control.
- Automatic train operation.
- Simulation studies.
dIScRIMINATORS
Value to customers:
• Customised systems.
• More efficiency in monitoring and reporting.
• Improved operational productivity.
• Maintenance planning.
• Lower operating cost.
• Increased safety – less accidents.
MRX TEchNOLOgIESMRX’s automated systems provide objective measurement and monitoring of vehicle equipment and rail infrastructure
cONTAcT / AddRESS dETAILS
Steve Mahede
MRX Technologies
24 Drummond Place, West Perth, WA 6005, Australia
Phone: +61 8 9227 4588
Fax: +61 8 9328 4589
Email: [email protected]
Web: www.mrxtech.com.au
KEy cUSTOMERS
• BHP Billiton Iron Ore
• Bombardier Transportation
• Queensland Rail
• Siemens Transportation
• MTR Corporation
• Brookfield Rail
QUALITy APPROvALS/AWARdS
• AS/NZS ISO 9001:2008
24 RAIL INDUSTRY CAPABILITY DIRECTORY
cAPABILITIES
• Over 27 years contracting to rail authorities.
• New and innovative cost effective fencing – access control and
associated products.
• Design and manufacturing facilities – five acre facility at Penrith.
• Northern Fencing Rail Services Division (NFRSD) - with dedicated
resources to rail clients. Branch Network Sydney, NSW Regional and
QLD x 11.
• Comprehensive fleet of equipment.
dIScRIMINATORS
• Designers of fencing systems specific to rail environments that save
money and improve efficiencies.
• Specialists in improving efficiencies in the practices and processes
employed in the rail environment.
NORThERN fENcINg SPEcIALISTS PTy LTd Northern Fencing Specialists design fencing systems specific to the rail environment
QUALITy APPROvALS/AWARdS
• Fencing & building License – 35134S
• Third Party Certified
- OHS: AS:4801:2001
- QMS: ISO 9001:2008
- EMS: ISO 14001: 2004
cONTAcT/AddRESS dETAILS
Michael Kerr
General Manager
Northern Fencing Specialists Pty Ltd
Head Office: 44 Preston Street, Penrith, NSW 2750, Australia
Phone: +61 2 9972 5800
Fax: +61 2 9981 6555
Mob: +61 413 446 966
Email: [email protected]
Web: www.northernfencing.com.au
KEy cUSTOMERS
• Sydney & NSW Trains
• NSW Roads & Maritime
Services
• NSW Public Works
• NSW State Transit Authority
• Juvenile Justice
• Sydney Water
• Local Government – Councils
x 12
• SA Government
KEy PARTNERS
• Parent company – Dunn &
Farrugia
• Twenty five dedicated small
and medium enterprises
specifically trained in working
in rail environments
• Recycle Plastic Products in
rail environments – SAMM
Industries
25
cAPABILITIES
OEM Technology Solutions has developed an extensive suite of products and
services to deliver worldwide to customers to increase their product or system
effectiveness and lead to an improved bottom line. Capabilities include:
• Electronics and software design in accordance with international standards.
• High level manufacturing facilities in-house with complimentary
utilisation of both local and off-shore third party manufacturing
for high volume sub-assemblies such as electronic printed circuit
assemblies (PCA’s) and metalwork.
• Engineering skills to integrate all the elements of a system to deliver a
turn-key solution to the customer.
• Service and maintenance facilities for the on-going support of our
customers and products.
dIScRIMINATORS
• OEM is an established company in the rail, road and industrial
technology industries possessing an extensive suite of hardware
products designed specifically for the industries described.
• All of OEM’s hardware devices are able to connect seamlessly to the
OEM Internet cloud, providing customers with the information and
strategies required to improve their organisation’s performance. We are
able to manage and assemble the operational system using our project
management expertise and our proven Integrated Management System
to deliver a high quality product, on-time and within budget.
OEM TEchNOLOgy SOLUTIONS OEM Technology Solutions provides technology solutions for Original Equipment Manufacturers (OEM’s) and end users
cONTAcT/AddRESS dETAILS
James McLeod
CEO
OEM Technology Solutions
Unit 13, 82 Reserve Road, Artarmon, NSW 2064, Australia
Phone: +61 2 9966 9424
Fax: +61 2 9966 9429
Email: [email protected]
Web: www.oem.net.au
KEy cUSTOMERS
• Knorr-Bremse
• Vossloh Kiepe
• Bombardier Transportation
• Alstom Transport
• Siemens
• Downer EDI Rail
• United Group Limited Rail
• Faiveley Transport
• Invensys
• Railcorp
• Pacific National
• Australian Railroad Group
KEy PARTNERS
• Petards
• MEN Mikro Elektronik
• Deuta-Werke
• Digi International
QUALITy APPROvALS/AWARdS
• 2012 NSW Premier’s Export
Award for “Innovation in
Exports”
• 2011 ATS - NSW Patrons
Award for Export
Achievement
• 2008 Engineering Excellence
Awards – PC3 Controller
• QMS ISO9001:2008, EMS
ISO14001:2004, OHS
AS18001:2007
26 RAIL INDUSTRY CAPABILITY DIRECTORY
cAPABILITIES
• Custom polyurethane and thermoplastic moulders.
• Proven/compliant fire retardant foam cushions for public transport
seating.
• Fire retardant mouldings.
• Open cell and closed cell foam.
• Self skinning foam.
• Reaction injection moulding.
• Reinforced reaction injection moulding.
• Rigid, semi-rigid and flexible polyurethanes.
• Rotational casting.
dIScRIMINATORS
• Highly flexible and innovative.
• Able to handle small runs.
• Australian-made fire retardant foam to meet international standards
(compliant).
• Responsive.
• Years of rail industry proven performance in Victoria, New South
Wales and Queensland.
PLASKONA INdUSTRIESPlaskona Industries manufacture flame retardant foam seating and related products
KEy cUSTOMERS
• Queensland Rail & Queensland National – SMUX20/ EMU
• IMU120
• Maintrain/UGL Unipart
• Bombardier
• EDI/Downer – GM424 & 427 Project
• Vic Rail
• Vix Technologies
QUALITy APPROvALS/AWARdS
• AS / NZ ISO9001:2008.
cONTAcT / AddRESS dETAILS
Andrew Fischer
Plaskona Industries
49 Rushdale Street, Knoxfield, VIC 3156, Australia
Phone: +61 3 9763 4888
Fax: +61 3 9763 1733
Email: [email protected]
Web: www.plaskona.com.au
27
cAPABILITIES
• Power cable.
• Instrumentation cable and control cable.
• Databus cable.
• Signalling and communication.
dIScRIMINATORS
• Innovative ideas and designs to customer specifications.
• Making the impossible, possible, we are not just another cable
company, on time and within budget.
• Globally competitive pricing.
• Urgent orders expressed, 25,000m manufactured and delivered for
Rio Tinto.
POWER fLEX cABLESPower Flex Cables design and manufacture rail and rolling stock solutions
KEy cUSTOMERS
• Invensys
• Ansaldo
• NSW Transport Rail Corp
• Q R National
• Alstrom Transport
• Siemens
• GE
QUALITy APPROvALS/AWARdS
• Cables manufactured to AU/NZ standards.
• Cables manufactured to international standards, IEC 60332-3,
ISO 61034.
cONTAcT/AddRESS dETAILS
Chris O’Grady
Sylvia Livolsi
14/87 Webster Road, Stafford, QLD 4053, Australia
Phone: +61 7 3856 6182
Fax: +61 7 3856 6184
Email: [email protected]
Web: www.powerflexcables.com.au
28 RAIL INDUSTRY CAPABILITY DIRECTORY
cAPABILITIES
• For all passenger rail and light rail composites and interiors
requirements:
- Design
- Manufacture
- Supply
- Install
- Service.
• Products include:
- Driver desks
- Toilet modules
- Luggage and storage racks
- Weathershields
- Lightweight, structural and ballistic-rated nose cones
- Retrofitting and integration of modules.
dIScRIMINATORS
• Low risk, price competitive solutions.
• Manufacture and/or integration of interior systems.
• Facilities within Australasia and South Eastern Asia.
• Compliance with international fire standards including BS6853 cat 1(a).
• 30 years servicing the passenger rail industry.
RPc TEchNOLOgIES PTy LTdRPC provide products and services for all passenger rail and light rail composites and interiors
cONTAcT/AddRESS dETAILS
Darren Will
Business Development Manager
RPC Transport
Phone: +61 403 091 001
Email: [email protected]
Web: www.rpctechnologies.com
KEy cUSTOMERS
• Downer Rail
• Bombardier Transportation
Australia
• Alstom Transport
• UGL Unipart
• Metro Trains Melbourne
• Sydney Trains
• Aurizon
KEy PARTNERS
• PT RPC Indonesia
• RPC Malaysia Ltd
• RPC International, Thailand
• PT MoldCAM RPC
QUALITy APPROvALS/AWARdS
• ISO5001
• AS4801
29
cAPABILITIES
• Provision of mobile medical centres, medical equipment and qualified
paramedics and nurses to support remote rail construction and repairs
and industrial sites.
• Provision and management of medical consumables.
• Provision of all insurances and requirements including drug licence,
ambulance licence (if necessary) and health department approvals.
• Coordination of work injury management.
• Coordination of patient evaluation and retrieval.
• Accredited first aid training and emergency response training.
• Medical and emergency response consulting.
• Onsite drug and alcohol testing.
dIScRIMINATORS
• Qualified and field experienced paramedics not just ambulance service
experience.
• Experience in primary health to manage everyday illness and work
injury not just trauma.
• Ability to mobilise at short notice with fully functional medical centres,
paramedics, nurses, ambulances, fire and rescue vehicles and medical
equipment.
• Quality assured company.
• Liaise with local medical and emergency response agencies to
develop co-ordinated medical and emergency response including
aeromedical evacuation.
SITEMEd PTy LTdSitemed are providers of onsite medical and emergency response services
cONTAcT/AddRESS dETAILS
Nicole Nott
Sitemed Pty Ltd
Head Office: 67 Lipson St, Port Adelaide, SA 5015, Australia
Perth: 100 Havelock St, West Perth, 1300 SITEMED
Melbourne: Level 5, 55 Victoria Parade, Melbourne, 1300 SITEMED
Phone: +61 8 8447 2017
Fax: +61 8 8447 2016
Email: [email protected]
Web: www.sitemed.com.au
KEy cUSTOMERS
• Arrium Mining
• Downer
• Adelaide Aqua
• BHP Billiton
• OZ Minerals
• Heathgate Resources
• HWE Mining, SMR, Iron Ore Mine
• SANTOS
QUALITy APPROvALS/AWARdS
• ISO 9001:2008 -Certified by
EQAS
• State and Territory Drug
Licences
• National Telstra Business
Award 2012
30 RAIL INDUSTRY CAPABILITY DIRECTORY
cAPABILITIES
• In-house design electronic, mechanical and software engineers.
• Global sales and service offices.
• Weighing systems for rail vehicle balancing in metro rail workshops,
portable systems used to spot check the weight of a rail vehicle
anywhere, low and high speed electronic sleeper based weighing
systems up to 80kmh, bogie weighing systems.
• Systems designed to suit customer requirements, including mineral
load out stations, power stations, grain operators etc.
dIScRIMINATORS:
• Weighing systems for rail vehicle balancing, which may assist in
preventing derailments, track and rail vehicle damage, brake lock ups
and make for a smoother and more economical ride.
• Trakblaze was the first company in the world to achieve Government
Trade approval in 2003 for train weighing up to 80kmh.
• Recent exports into many countries including China for train
balancing systems.
• Simple to install systems with minimal after sales servicing required.
TRAKBLAzE gLOBALTrakblaze Global has over 80 years’ experience as manufacturers of rail and road vehicle weighing systems
cONTAcT/AddRESS dETAILS
Trakblaze Global
5 Sara Grove, Tottenham, VIC 3012, Australia
Phone: +61 03 9318 9277
Email: [email protected]
Web: www.trakblaze.com
KEy cUSTOMERS
• Shenzhen and Hong Kong
Metro (MTR)
• Rio Tinto WA & Mongolia
• Downer EDI
• V-Line
• Governments, including-
Indonesia, Vietnam Singapore,
South Africa. Morocco
• Private customers in many
countries
KEy PARTNERS
• American, German & Indian
offices
QUALITy APPROvALS/AWARdS
• Compliant with ISO9001:2000
31
cAPABILITIES
• TTG is an Australian clean technology company who operate globally
from Sydney, London, Derby, New Delhi and Beijing.
• TTG supply driver advisory systems and network management tools
that save energy and optimise train pacing to keep trains on time and
manage capacity.
• TTG deliver full turnkey services for any type of train, anywhere, and
provide customers with through life service support.
• TTG’s core product Energymiser® is deployed, or being deployed on:
- +1,000 trains globally.
- +30,000+ kms operating track
- Five continents with representation and projects in Australia, New
Zealand, China, India, Africa and Europe (UK, France and Poland).
dIScRIMINATORS
• TTG products incorporate unique patented technology.
• TTG products are proven in the widest range of applications spanning
bulk and intermodal freight, and urban and interurban passenger and
high speed regional trains.
• TTG products can be retrofitted to existing trains, or integrated into
new trains.
• TTG have over 30 years of R&D history built into its products and
are a recognised global leader in the supply of energy efficient driver
advisory systems.
• TTG products are proven, they save energy and keep trains on time
and offer a ROI of between 9 and 18 months.
• TTG offer a flexible approach that allows them to deliver solutions fully
aligned to customer needs.
KEy cUSTOMERS
• Pacific National (Aus)
• FirstGroup (UK)
• Freightliner (UK)
• Arriva UK Trains
• SNIM (Mauritania)
• KiwiRail (NZ)
• Aurizon (QLD)
KEy PARTNERS
• University of South Australia
QUALITy APPROvALS/AWARdS
• ISO9001:2008 Certified by
Global-Mark
• Link-up Registered Supplier
(UK Qualification Scheme for
Suppliers)
• Modern Railways Industry
Innovation Awards, June 2011
• Premier’s NSW Export
Awards: Highly Commended
in 2011, Finalist in 2012 & 2013
• Modern Railways 2012 First
Group - awarded Innovator
of the Year for implementing
DAS on its fleet
TTg TRANSPORTATION TEchNOLOgy PTy LTdTTG supply driver advisory systems and network management tools
cONTAcT/AddRESS dETAILS
Dale Coleman
Managing Director
TTG Transportation Technology Pty Ltd
Level 3/225 Clarence St, Sydney, NSW 2000, Australia
Phone: +61 2 9249 0100
Email: [email protected]
Web: www.ttgtransportationtechnology.com
32 RAIL INDUSTRY CAPABILITY DIRECTORY
The Australasian Railway Association (ARA) is the peak body for
rail throughout Australia and New Zealand. We are a member based
association representing passenger and freight operators, track owners
and managers, manufacturers of rolling stock, construction companies and
all other firms supplying and contributing to the Australasian rail sector.
The ARA connects rail organisations across Australasia creating productive
networks that benefit the industry. This is demonstrated through the
organisations:
• 180 members.
• 84 industry reports and information leaflets.
• 21 annual conferences, courses and workshops.
• 146 industry committees and working groups.
• 107 submissions to government.
• 21.1 million people reached in 2011 through media coverage.
The primary purpose of the ARA is to create an environment for the rail
industry to prosper. We lead the advocacy effort to all levels of government
to drive policy reform and increase investment in rail.
As the voice of the Australasian rail industry, we facilitate, coordinate and
communicate on behalf of the industry to achieve results.
Rail has a good story to tell and we aim to tell it.
The Australian Trade Commission, Austrade, is the Australian
Government’s trade, investment and education promotion agency.
Through a global network of offices, Austrade assists Australian companies
to grow their international business, attract productive foreign direct
investment into Australia and promote Australia’s education sector
internationally.
Austrade provides information and advice that can help Australian
companies reduce the time, cost and risk of exporting. We also provide a
range of services to Australian exporters looking to expand their business in
growth and emerging markets, including:
• Information and advice on doing business in international markets.
• Help with overseas market selection.
• Identification of relevant overseas contacts.
• Assistance with market entry and expansion.
• Identification and follow-up of specific international business
opportunities.
We also administer the Export Market Development Grant (EMDG) scheme,
which is the Australian Government’s financial assistance program for
aspiring and current exporters.
Email: [email protected]
Phone: 13 28 78 (within Australia)
Web: www.austrade.gov.au
The Australasian Railway Association (ARA)
The Australian Trade Commission
33
Enterprise Connect is an Australian Government program that services
small to medium sized businesses in a wide range of industries.
Our core service is a comprehensive, confidential and independent Business
Review, delivered at no charge. Conducted by skilled Business Advisers,
the Business Review is carried out on site and involves a top-to-bottom
analysis of your business and recommendations are made from the review.
Grant funding is available to help implement recommendations.
We also work closely with rail firms to improve the competitiveness of
the rail supply chain through embedding continuous improvement within
participating companies.
The Supplier Continuous Improvement Program (SCIP), delivered at no
charge, focuses on accreditation and quality improvement, development
and performance, as well as business relationships, in order to improve
efficiency, reduce duplication and lower overheads and costs in the
supply chain.
For further information on how your company can be involved in SCIP
please call 02 6213 7552 or email [email protected].
Industry Capability Network (ICN) is an independent organisation that
introduces innovative rail suppliers to international rail manufacturers.
ICN gives you access to rail experts in Australia and New Zealand that can
meet your needs including price, delivery and quality.
ICN’s network of specialised consultants can also work with you to provide
independent procurement advice and introduce you to a range of highly
skilled and dependable rail suppliers. Talk to ICN about cost-effective,
innovative ways to run your rail supply chain or next project.
• More than 29 years’ experience identifying suppliers for manufacturers
and major projects globally.
• A national team of technical consultants with an in-depth knowledge
of innovative rail suppliers.
• Expertise in supply chain development and technology solutions. Free
of charge and government supported.
• Online supplier database of more than 71,000 businesses.
• 30 offices around Australia and New Zealand.
CONTACT DETAILS
Tony Carney
National Sector Manager – Rail
T: +61 418 353 718
Level 11, 10 Queens Road
Melbourne VIC 3004
Australia
www.icn.org.au
Enterprise Connect
Industry Capability Network (ICN)
34 RAIL INDUSTRY CAPABILITY DIRECTORY
The Commonwealth Scientific and Industrial Research Organisation
(CSIRO) is Australia’s national science agency. It generates new
intellectual property and supports industry with engineering and
R&D capability.
CSIRO partners with manufacturers servicing the rail industry to develop
and commercialise advanced materials, processes and devices that improve
economic and environmental performance. CSIRO improves the competitive
position of its partners via improvements in cost competitiveness and
product performance, creation of new business and integration into
domestic and global supply chains.
CSIRO has established world class capabilities in Materials Science and
Engineering, Process Science, Mathematical and Information Systems,
Energy Technology and Information and Communications Technology.
CSIRO draws upon these capabilities to address all three of the technology
priority areas identified in the “On Track for 2040” rail industry technology
road map:
• Materials and Manufacturing
• Monitoring and Management
• Power and Propulsion
Typical outcomes of CSIRO projects include:
• Energy storage technology
• Advanced electric machines and power electronics
• Light weight and high performance designs/materials
• Sensors and sensor networks
• Software for modelling complex systems
NSW Trade & Investment is responsible for helping drive sustainable
economic growth in NSW, uniting key Government economic development
agencies, offices and authorities to provide maximum benefit to the State.
NSW Trade & Investment works with industry and the community in areas
such as trade, business and investment; primary industries, food and water;
mineral resources and energy; and tourism, major events, hospitality, racing
and the arts.
The Department’s Investment & Export Services division provides advice
and support to NSW exporters to build export capabilities; supports a
proactive international trade engagement program; assists foreign and local
businesses to establish new operations, to relocate or to expand; and briefs
incoming trade and investment delegations.
The division manages the NSW Government’s international business offices
in China, India, the United Arab Emirates and the United States of America.
For more information visit www.export.nsw.gov.au.
The Commonwealth Scientific and Industrial Research Organisation
NSW Trade & Investment