AUSTRALIAN DEFENCE ALLIANCE · 2021. 5. 3. · Victoria’s innovative world-class aerospace design, ... The Alliance has more than 255 member companies and these are listed at the

AUSTRALIANDEFENCEALLIANCE

F18 - AIRSHOWThe Australian Defence Force is proud to continue to

support the Australian International Airshow in Victoria.

FRONT COVER: RAAF F-35AVictorian companies form a significant part of the national supply chain

supporting the F-35 Joint Strike Fighter Project. Chair's Foreword

Victoria’s innovative world-class aerospace design, systems and manufacturing capabilities make a significant

contribution to Australia’s aerospace industry. That industry is focused on the manufacture of aerospace components for

global supply chains and the provision of engineering and logistics services for the sustainment of aircraft.

In particular, our industry has achieved great success in winning the major national share of F35 Joint Strike Fighter

supply chain work and winning significant contracts in the Boeing and EADS supply chains. Our industry also has

significant capabilities in the development and production of Unmanned Aerial Vehicles.

The Victorian Defence Alliance – Aerospace has been established to support the aerospace industry in Victoria to win

work in domestic and international supply chains. It presents a single point of focus for companies supplying products,

systems and services to the Australian and international markets. The Alliance supports industry by providing information

on marketing opportunities and by establishing effective pathways for connecting Alliance members with industry primes

and key government stakeholders. It also provides opportunities for networking, collaboration and mentoring.

Membership of the Alliance is open to all companies operating in Victoria with the potential to supply products and

services to the military and adjacent commercial aerospace markets.

The Alliance has more than 255 member companies and these are listed at the back of this Directory. A significant

number of member companies are promoting their capabilities in this Directory.

I invite all those seeking proven and trusted partners for aerospace industry work to consider the capabilities of our

Alliance Members.

Jack Kormas

Chair

Victorian Defence Alliance - Aerospace

1

Victorian Defence Alliance - Aerospace Committee

Mission StatementTo maximise the opportunities and ability for Victoria’s industry to win work in the domestic and international military, and adjacent commercial, aerospace markets and to achieve sustainable growth in the aerospace sector.

Jack Kormas Chair

Managing DirectorTextron Systems Australia Pty LtdTel: +61 3 9518 [email protected]

Michael Zimmer Deputy Chair

Managing DirectorCablex Pty LtdTel: +61 3 9575 [email protected]

Kristen Raby Committee Member

Operations Manager MelbourneNova SystemsTel: +61 3 9024 [email protected]

Tony Carolan Committee Member

Industry AdvisorTel: +61 3 8552 [email protected]

Simon Hack Committee Member

Senior ManagerPrograms & Business OperationsRUAG AustraliaTel: +61 3 9721 [email protected]

Steve Mellor Committee Member

General Manager, Aerospace & DefenceMarand Tel: +61 3 8552 [email protected]

Dr Ken Anderson Committee Member

Defence Science ConsultantTel: +61 (0) 488 322 [email protected]

Vinesh Karan Committee Member

Commercial DirectorAW Bell Pty LtdTel: +61 3 8773 [email protected]

Colin Campbell Committee Member

General ManagerApplied Fasteners & ToolingTel: +61 3 9939 [email protected]

Adrian Lutze Committee Member

General Manager, Aircraft Maintenance & SupportBAE Systems AustraliaTel: +61 3 9918 [email protected]

2

ARMY AVIATIONAn MRH-90 helicopter, prepares for take-off in the Western Highlands of

Papua New Guinea during Operation Hannah.

3

Chair’s Foreword __________________ Inside Front Cover

VDA-Aerospace Committee _________________________1

The Victorian Defence Alliances _____________________4

Australian Defence Alliance (Vic) ____________________6

Victorian Government Support ______________________9

Industry Editorial _________________________________10

Nova Systems Case Study _________________________12

A.W. Bell Case Study ______________________________14

VDA-Aerospace Member Capabilities _______________16

Victorian Aerospace Capabilities ____________________18

Capability Glossary _______________________________19

Capability Listing Index ____________________________20

Contents

4

Victorian Defence AlliancesThe Victorian Defence Alliances have been established through a partnership between the Government of Victoria and the Australian Defence Alliance (Vic), formerly AIDN-Vic. Membership of the Alliances is open to all companies operating in Victoria with the potential to supply products, systems and services to the national and international defence industry market.

The Alliances bring focus, cohesion and unity to the actions and initiatives of companies with a shared and common purpose in specific domains of Victoria’s defence industry sector. They allow member companies to act together to deliver timely, cost effective and innovative solutions to meet Defence needs.

The Alliances support industry through advocacy, networking, collaboration, mentoring and capability building to assist member companies to win work in national and international defence industry supply chains. Importantly, the Alliances provide effective pathways for connecting Alliance members with industry primes and key government stakeholders.

5

VICTORIANDEFENCEALLIANCESUBMARINES

VICTORIANDEFENCEALLIANCEM A R I T I M E

VICTORIANDEFENCEALLIANCE

LAND SYSTEMS

VICTORIANDEFENCEALLIANCED I G I T A L

VICTORIANDEFENCE

ALLIANCES

VDA

VICTORIANDEFENCEALLIANCEA E R O S PA C E

6

7

Australian Defence Alliance (Vic) – (ADA Vic)Champions the cause of Victoria’s SMEs in Defence industryThe Australian Defence Alliance (Vic) – (ADA Vic) is the Nation’s largest singular, professional body advocating on behalf of, and providing strategic and policy guidance into, Victoria’s dynamic base of small and medium dual-use and defence industry companies. ADA Vic assists its Members to capitalise on opportunities provided across Australian and Global defence/security markets through the formation of strategic partnerships and collaboration nationally.

Victorian Defence Alliances The Victorian Defence Alliances are a project which have been established through a partnership between ADA Vic and the Victorian Government. There are five Victorian Defence Alliances, each focused on matching the capabilities of Victorian businesses against the needs of defence industry. The VDA consists of VDA-Digital, VDA-Aerospace, VDA-Land Systems, VDA-Maritime and VDA-Submarines.

Defence Market Intelligence and NetworkingADA Vic helps its Members collaborate nationally and internationally with dual-use and defence industry suppliers and provides connections with Defence and defence industry Prime companies. ADA Vic organises networking events, seminars, trade missions and a range of other industry support initiatives, promoting a collaborative and capacity building approach.

Communication link between Industry and GovernmentADA Vic represents the interests of its Members by providing a communication link between those members and State and Commonwealth Government Departments. These include the Commonwealth Department of Defence (Capability, Acquisition and Sustainment Group), the Department of Industry, Innovation and Science and the Victorian Government’s Department of Jobs, Precincts and Regions. ADA Vic also represents its Members through advocacy on matters that shape defence and security industry policy and strategy.

National OrganisationADA Vic is the Nation’s largest singular, professional advocacy body for dual-use and defence industry SMEs, representing over 300 member companies with interests in Victoria and nationally. Through its partnership in the Australian Defence Alliance, ADA Vic works with the Defence Teaming Centre in South Australia and the Henderson Alliance in Western Australia to represent 1,100 + SMEs nationally, sharing strategic relationships with national and international professional advocacy bodies and encouraging national capacity building through collaboration.

Visit www.australiandefencealliance.org.au to discover the niche capabilities that you may be seeking or if you are interested in membership in ADA Vic please email Claire S. Willette, Chief Executive Officer [email protected] or phone: +61 3 8658 5707.

9

Victoria: Defence ExcellenceVictoria is Australia’s state of defence industry excellence.

Victoria’s defence sector is an important part of the state’s economy,

contributing billions of dollars annually. It employs around 18,500 people

and has more than 770 businesses which manufacture equipment and

provide services for defence activities.

Our innovative aerospace design and manufacturing capabilities make

a significant contribution to Australia’s aerospace industry. Victoria has

more than 250 aerospace companies supplying the Australian and global

aerospace industry.

Victorian companies have supplied 65 per cent of all work awarded to

Australia over the past decade for the F-35 Joint Strike Fighter (JSF)

project, the most of any state. The JSF project will supply 72 planes to the

Royal Australian Air Force (RAAF) including associated facilities, weapons

and training. The project is capitalising on Victoria’s extensive experience

in meeting military aerospace requirements.

Thales Australia, through the OneSKY Program, will deliver an integrated

Civil and Military Air Traffic Management System from its globally leading

Air Traffic Management Centre of Excellence in Melbourne.

Companies based in Victoria are also involved in the Australian Defence

Force basic pilot training program commencing in East Sale in 2019,

providing airframe design, aerial vehicles, airspace controls systems, as

well as participating in international supply chains.

The Andrews Labor Government’s vision is for an innovative, globally

competitive, highly skilled and adaptive defence industry that maintains

its position at the leading edge of providers serving the Australian

Defence Force and global supply chains.

The Labor Government actively supports the state’s defence industry

through:

• advocacy and promoting Victoria as a competitive location for major

defence prime contractors and projects

• linking Victorian industry into international defence supply chains

• promoting Victorian industry capabilities within domestic and

international defence trade shows and missions

• encouraging research and development (R&D) and collaborative

networks

• supporting initiatives to grow Victoria’s highly skilled workforce

• supporting Victorian businesses to grow and improve

competitiveness to secure defence market opportunities.

A key part of the state’s commitment to the Victorian defence industry is

the advice, guidance and advocacy provided to government and industry

by the Victorian Defence Industry Advocate, the Defence Council Victoria,

and the Victorian Defence Alliances.

We will continue to work closely with the Australian Department of

Defence and the defence industry to ensure that we have the expertise

and capability to continue delivering domestic and international defence

projects.

THE HON MARTIN PAKULA MP

Minister for Jobs, Innovation and Trade

10

Industry Editorial

The Australian aerospace industry is entering an unprecedented period of opportunity as the Australian Defence Force acquires and supports new aviation platforms and the international supply chains supporting commercial aircraft production experience strong demand.

Importantly, most international defence aerospace Primes have established global supply chain programs that create new opportunities for Australian industry. These programs, coupled with Federal and State government action to build industry capacity and capability, mean that industry is now well placed to take advantage of growth opportunities. A further factor is the Federal Government’s plans to grow Australia’s defence exports. The aerospace industry, particularly the capabilities based in Victoria, has largely had an export focus and is ready to respond to this initiative.

The aerospace industry in Victoria has made a successful transition from a history of aircraft production to one focused on engineering and support services and manufacturing of components for global supply chains. Many Victorian companies have achieved success in the supply chains supporting Lockheed Martin, Boeing, Northrop Grumman, Textron Systems, BAE Systems and Airbus. That success has been based on their access to a highly skilled workforce, a highly innovative research and development sector and a willingness to exploit developments in advanced manufacturing.

Victoria’s aerospace industry is well positioned to make a significant contribution to meeting the future demands of the national and international military and commercial aerospace market.

11

TEXTRON SYSTEMS AUSTRALIA, MELBOURNE, VICTORIADesigned and Manufactured in Australia, the Aerosonde SUAS platform, has more than 300,000 flight hours in land and sea-based operational environments.

12

ALLIANCE MEMBER CASE STUDY

PILATUS FLYING OVER SALE, VICTORIATwo of Air Force’s new Pilatus aircraft during a flight in the Gippsland region.

13

Nova Systems, a local defence enterprise, are major players in delivering the Pilot Training System to the Australian Defence Force (ADF). Their work and partnership with Lockheed Martin demonstrates good prospects for international engagement as the Victorian defence industry moves forward.

The health of the Victorian defence industry is dependent upon fostering international collaboration. It is crucial that companies are proactive and exercise initiative towards these collaborations. For Nova Systems, their collaboration with Lockheed Martin on the Pilot Training Program offers a compelling example of such initiative and its prospects for Alliance members.

On Dec 8 2015, under Project AIR 5428, the Commonwealth of Australia signed a contract with Lockheed Martin (LM) for the establishment of a Pilot Training System (PTS) to train Australian Defence Force (ADF) Fixed Wing Ab Initio Pilots and ADF Fixed Wing Qualified Flying Instructors. The PTS will replace the training capability currently being delivered through CT-4 and PC-9 aircraft at various locations around the country. LM is the Prime Contractor for Team 21 which includes Pilatus, as the aircraft and engineering services supplier, and Hawker Pacific, as the aircraft maintenance provider. This is an extensive program which will provide the ADF with a turnkey training solution that will be enduring and effective and which will prepare ADF pilots for their transition into 5th generation fighters and other advanced ADF aerospace platforms.

Nova Systems is an Australian-owned and operated Global Solutions Provider, specialising in the provision of engineering and management services, providing industry and government with world class independent expertise in delivering

complex projects and solving technologically challenging problems. As their Victorian Defence Alliance quad-chart demonstrates, Nova’s proven experience in delivering complex projects has led to significant roles on multiple projects in the Defence and Defence Industry environments. Nova has supported programs including Air Warfare Destroyer, Multi Role Tanker Transport (MRTT), Wedgetail Airborne Early Warning and Control, Tiger Armed Reconnaissance Helicopter, and Taipan Multi-Role Helicopter.

Nova is currently supporting the introduction into service of the PTS through the management of the Aircraft Type Certification, Flight Training Device Qualification and PTS Verification and Validation programs as part of Team 21. Nova plays a pivotal role in supporting Team 21 in reducing risk to the program and ensuring that the ADF receives a PTS which is effective and efficient.

AIR 5428 will deliver 49 PC-21 Aircraft, 7 Flight Training Devices and a Learning Environment. With support from Nova, the PC-21 Aircraft achieved Australian Military Type Certification in 2017. Nova’s participation in Flight Training Device Qualification and PTS Verification and Validation activities will continue through to mid-2020.

Nova Systems are well positioned to enhance their forward growth as key service providers. Nova System’s success is predicated upon a solid and successful project history that has been well expressed in a high-quality Capability Directory listing. Nova Systems is the air and space capability partner for complex futures.

Nova Systems’ Key Role in AIR 5428 - Pilot Training System

14

ALLIANCE MEMBER CASE STUDY

Based in Victoria, A.W. Bell is a family owned business established in 1952 that originally supplied wooden patterns to the automotive industry. In 1977, A.W. Bell completely transformed its services and moved into castings and serviced general engineering.

In 2009, AW Bell began their transition away from the traditional, automotive based manufacturing which had been the mainstay of the business for over 30 years, towards high value, aerospace and defence products. AW Bell also understood that to compete globally a company based in Victoria would need to demonstrate technological superiority, while meeting the industry’s stringent supply requirements.

From a technical perspective, investment casting is a well-established manufacturing technique utilised globally for manufacture of precision, high value parts. However, a major impediment to the greater utilisation of investment cast aluminium in the aerospace sector has always been the fact that the ceramic shell used in the process is by its very nature, insulating. This prevents the aluminium from cooling rapidly during solidification. As a result of this problem, aerospace aluminium investment castings often have had a “casting factor” employed, which increased their weight by up to three times.

Collaborating with CSIRO researcher Dr Roger Lumley, through the Researchers in Business Program, the AW Bell team developed the Aluminium Billet Equivalent (ABE) process – a revolutionary new approach to investment casting which produces aluminium components with near to the theoretical maximum properties achievable.

The ABE process uses rapid and controlled solidification, producing an increase in cooling rate of more than 20 times faster than the standard investment casting process. This, combined with the use of stringent methods to produce extra-clean metal, has resulted in the manufacture of products classified as Casting Factor 1. Casting Factor 1 may be utilised

JET ENGINE COMPRESSOR HOUSINGJet Engine Compressor Housing – Cast by AW Bell using its

3D printing and ABE capability.

A.W. BELL HEADQUARTERSHome of AW Bell and the ABE process, Dandenong South, Victoria.

15

where very high levels of quality are able to be demonstrated and guaranteed in the product. As a result, Casting factor 1 products do not suffer from the weight penalty of those produced from standard investment casting. The ABE process therefore has two main advantages: 1) it produces very fine microstructures in aluminium cast alloys which can then achieve very high level mechanical properties; and 2) as a result, weight reduction of critical components may be facilitated because the parts can be designed without penalty.

In early 2012, three years after embarking in their new direction, AW Bell transformed its research into a fully-fledged production system with the assistance of a $1.5 million Commercialisation Australia grant. The ABE process has now been commercialised, implementing a fully automated robotic cell, and is being used for production.

In parallel, AW Bell also introduced an innovative lean manufacturing model which focused on waste reduction and improving the consistency and repeatability of production. In late 2013, AW Bell achieved AS9100C accreditation for supply of aerospace products making AW Bell the only aerospace foundry in Australia.Approximately four years after initiating their new direction, AW Bell has gone from being a successful local company, to being an exporter of high-quality cast and machined parts to Europe, Asia and North America. Innovative thinking, processes and technology together with a clear company vision have spearheaded this change.

AW Bell’s investment in technology and business process innovation has ensured they not only compete with, but exceed, manufacturers in traditionally

more advanced overseas markets. Thanks to developing the Aluminium Billet Equivalent Process AW Bell is now considered a world leader in aluminium aerospace casting technology and are preferred suppliers of aluminium components to international aerospace and defence companies.

The company is now amongst one of the leading manufacturing companies in the Australian defence supply chain and is a member of a number of key industry organisations such as the Victorian Defence Alliance - Aerospace where it regularly attends briefings in order to engage other industry players and also share its own learnings. This collaboration has helped AW Bell grows its own network and also been a key enabler of AW Bell’s success.

In a two-year period to 2013 AW Bells exports grew from 15 per cent to 32 per cent of sales. Over the same period the defence and aerospace component of sales grew from 9.5 per cent to 19.5 per cent. Now, in 2019, aerospace and defence comprises approximately 40% of sales and this number continues to grow. This growth has enabled AW Bell to continue investing in its facility, its people and processes, and through this, its local community.

A.W. Bell’s unique ABE Process

16

17

VICTORIAN DEFENCE ALLIANCE - AEROSPACEMEMBER CAPABILITIES

Victorian Aerospace Capabilities

Victoria’s military and commercial aerospace industry has a proven record of success in supporting the global supply

chains of manufactured components used by aerospace primes. Our industry has also been highly successful in

systems development and in the provision of engineering and logistics services to support the sustainment of RAAF

aircraft.

This success has been built of the capabilities of the many Victorian small to medium enterprises that support global

aircraft manufacture and provide the services required to sustain the aircraft used by our nation’s air force. These

companies have demonstrated their ability to meet the needs of the local and international aerospace industry and

are firmly established as trusted partners of that industry. They are well positioned to meet the future needs of the

aerospace industry.

The capabilities and credentials that form Victoria’s highly respected and capable military and commercial aerospace

industry are identified in this Directory against the following broad capability areas:

• Analysis, Modelling & Simulation

• Autonomous Systems

• Avionics / Electrical Systems

• Design & Engineering

• Information Systems

• Integration

• Manufacturing / Fabrication / Assembly

• Materials Technology

• Professional Services

• Research & Development

• Safety Systems & Testing

HAWK 127A Royal Australian Air Force Hawk 127 aircraft conducts Anti Air Warfare

training in the Western Australian Exercise Area.

19

The use of analysis and modelling and simulation tools to develop solutions for aerospace application.

Analysis, Modelling & Simulation

The design, development, production and support of autonomous (unmanned) systems and solutions for the aerospace environment.

Autonomous Systems

The design, development, production and support of electronic and electrical systems used on aircraft, artificial satellites and spacecraft. This includes communications, navigation, display and control systems.

Avionics / Electrical Systems

The provision of design and engineering services for the design and sustainment of aerospace platforms and the production of systems and components used on aircraft.

Design & Engineering

The design, development, production and support of software and hardware network and communication solutions for the aerospace environment.

Information Systems

The provision of design and engineering services to provide solutions that bring together aerospace component subsystems into a whole solution and to ensure that those sub systems function together.

Integration

The production, fabrication and assembly of components and systems for aerospace industry supply chains.

Manufacturing / Fabrication / Assembly

The development of materials, the production of components and the processing of materials into shapes and forms for use in the aerospace industry.

Materials Technology

The provision of engineering, accounting, legal, training and development, project management, information technology, logistics support and general consultancy services for aerospace industry clients.

Professional Services

The provision of research and development services to support clients in the aerospace industry.

Research & Development

The provision of testing and advice services to ensure the correct operation of systems and equipment for aerospace application.

Safety Systems & Testing

Capability Glossary

CGB Precision Products Pty Ltd _____________________________________________________ 38

Codarra Advanced Systems ________________________________________________________ 38

Communications Design and Management Pty Ltd ____________________________________ 39

Compilatrix Research Corporation ___________________________________________________ 39

Cornell Design Victoria _____________________________________________________________ 40

d-twin ____________________________________________________________________________ 40

Daronmont Technologies ___________________________________________________________ 41

Deakin University __________________________________________________________________ 41

Defence Science Institute ___________________________________________________________ 42

DEK Technologies _________________________________________________________________ 42

Direct Edge Manufacturing __________________________________________________________ 43

DMTC ____________________________________________________________________________ 43

Draeger Australia Pty Ltd ___________________________________________________________ 44

Envirofluid ________________________________________________________________________ 44

Geelong Defence Alliance ___________________________________________________________ 45

Geoplex __________________________________________________________________________ 45

GPSat Systems Australia Pty Ltd ____________________________________________________ 46

Greyscan _________________________________________________________________________ 46

H & H Machine Tools _______________________________________________________________ 47

Hardcat __________________________________________________________________________ 47

Hardchrome Engineering Pty Ltd ____________________________________________________ 48

Hardman Bros. Pty Ltd _____________________________________________________________ 48

Hargo Engineering Pty Ltd __________________________________________________________ 49

Heuch Refrigeration ________________________________________________________________ 49

Hofmann Engineering ______________________________________________________________ 50

HTA Aerospace & Defense __________________________________________________________ 50

HYDAC ___________________________________________________________________________ 51

Indec Consulting Pty Ltd ___________________________________________________________ 51

Integra Systems ___________________________________________________________________ 52

Interchem Pty Ltd _________________________________________________________________ 52

JVAT _____________________________________________________________________________ 53

KPMG ____________________________________________________________________________ 53

Capability Listing Index•

• • • • • • •• • • ••

• ••

• • • •• • • • • • • •

• • • • •• • • • •

• • • •• • •

• • • • • • •• • • • •

• • • •• • • •

• • • • • • • • • • •• • • • • •• • • • •• • •

• • • • • • • ••

• • • •• • • • • • • • • • •

• • •• •

• • • •• • •• • • • •

• •• •

• • • • • •

• • • •• • • • • •

• • • • • •• • • • •

• • •• • • •

• •• • • • • • • • •• •• • • • • • •• • •• • • • • •• • •

• ••

• • • • • • • •• • • • •

• • ••

• •• •• • •

• • • •• • •• • • •

• •• • • • •

• • • •• • • •

• • •• • • •

• • • • •

Analysis, M

od

elling &

Sim

ulation

Auto

nom

ous S

ystems

Avio

nics / Electrical S

ystems

Desig

n & E

ngineering

Inform

ation S

ystems

Integratio

n

Manuf-ng

/ Fabricatio

n / Assem

bly

Materials Techno

log

y

Pro

fessional S

ervices

Research &

Develo

pm

ent

Safety S

ystems &

Testing

Analysis, M

od

elling &

Sim

ulation

Auto

nom

ous S

ystems

Avio

nics / Electrical S

ystems

Desig

n & E

ngineering

Inform

ation S

ystems

Integratio

n

Manuf-ng

/ Fabricatio

n / Assem

bly

Materials Techno

log

y

Pro

fessional S

ervices

Research &

Develo

pm

ent

Safety S

ystems &

Testing

Acacia Foundry ____________________________________________________________________ 22

ACS Australia _____________________________________________________________________ 22

Aerospace & Specialist Components _________________________________________________ 23

Aerospace Australia Limited_________________________________________________________ 23

Aerospace Material Pty Ltd _________________________________________________________ 24

Agility Logistics Pty Ltd _____________________________________________________________ 24

All Sat Communications ____________________________________________________________ 25

Altair Engineering __________________________________________________________________ 25

AME Systems (VIC) Pty Ltd _________________________________________________________ 26

Amiga Engineering Pty Ltd __________________________________________________________ 26

AMOG Consulting _________________________________________________________________ 27

Amphenol Australia Pty Ltd _________________________________________________________ 27

ANCA Pty Ltd _____________________________________________________________________ 28

Anywise __________________________________________________________________________ 28

AOS _____________________________________________________________________________ 29

Applied CCM _____________________________________________________________________ 29

Applied Fasteners and Tooling Pty Ltd _______________________________________________ 30

APV _____________________________________________________________________________ 30

ATTAR ___________________________________________________________________________ 31

Austest Laboratories _______________________________________________________________ 31

Australian Aerospace Engineering ___________________________________________________ 32

Avalon Airport Australia _____________________________________________________________ 32

A.W. Bell Pty Ltd ___________________________________________________________________ 33

BAE Systems _____________________________________________________________________ 33

Baron Rubber _____________________________________________________________________ 34

Bartlett Manufacturing ______________________________________________________________ 34

Beak Engineering __________________________________________________________________ 35

Black Stump Technologies __________________________________________________________ 35

Bredo Mators Pty Ltd ______________________________________________________________ 36

Brenco Aerospace _________________________________________________________________ 36

Bunjil Energy ______________________________________________________________________ 37

Cablex Pty Ltd ____________________________________________________________________ 37

RF Industries _________________________________________________________________________ 70

RMIT University ______________________________________________________________________ 70

Ronson Gears ________________________________________________________________________ 71

RUAG Australia _______________________________________________________________________ 71

R.V.S. Industries Pty Ltd _______________________________________________________________ 72

Saab Australia ________________________________________________________________________ 72

Scientific Management Associates (Operations) Pty Ltd ___________________________________ 73

Sentient Vision Systems _______________________________________________________________ 73

Siemens Ltd _________________________________________________________________________ 74

Simuserv ____________________________________________________________________________ 74

SRX Global __________________________________________________________________________ 75

Stowe Australia _______________________________________________________________________ 75

Strategic Connections Group __________________________________________________________ 76

Swinburne University of Technology _____________________________________________________ 76

SYPAQ Systems Pty Ltd _______________________________________________________________ 77

TBH _________________________________________________________________________________ 77

Textron Systems Australia _____________________________________________________________ 78

The Citadel Group Ltd _________________________________________________________________ 78

Towers Group Pty Ltd _________________________________________________________________ 79

Trakka Systems ______________________________________________________________________ 79

Trax Print ____________________________________________________________________________ 80

TVN On-Country Pty Ltd _______________________________________________________________ 80

Uniform Safety Signs __________________________________________________________________ 81

Wallaby Batteries _____________________________________________________________________ 81

West Sale Airport _____________________________________________________________________ 82

YTEK ________________________________________________________________________________ 82

• • • • • • • • • •• • • • • • • • • • •

• • • •• • •

• ••

• • • • • •• • • •• • • • • •

• • • • ••

• • • • • • •• • • • • •

• •• • • • •

• • •• • • • • • • • • •

• • • • • •• • • • •

••

• • • • • • • • •• • • •

• • • • •• •

• • • • • • • • •• • • • • •• •

• • • • • • •• • • • • • •

• • • • •• • •

• • • • • •• • • • • • • • • •

• •• • • • • • • •

• • • • • •• • • • •• •

• •• • • • • • • • • •

• • • • •• • •• • • • • • •• • • • •• • • • • • • • • •• • • • • • • • • •

•• • • • • • •

• • •• • • • • •• • • • •

• • • •• •

• ••

• •• • • • •

Analysis, M

od

elling &

Sim

ulation

Auto

nom

ous S

ystems

Avio

nics / Electrical S

ystems

Desig

n & E

ngineering

Inform

ation S

ystems

Integratio

n

Manuf-ng

/ Fabricatio

n / Assem

bly

Materials Techno

log

y

Pro

fessional S

ervices

Research &

Develo

pm

ent

Safety S

ystems &

Testing

Analysis, M

od

elling &

Sim

ulation

Auto

nom

ous S

ystems

Avio

nics / Electrical S

ystems

Desig

n & E

ngineering

Inform

ation S

ystems

Integratio

n

Manuf-ng

/ Fabricatio

n / Assem

bly

Materials Techno

log

y

Pro

fessional S

ervices

Research &

Develo

pm

ent

Safety S

ystems &

Testing

L3 Technologies ______________________________________________________________________ 54

Leonardo Australia ____________________________________________________________________ 54

LMATS Pty Ltd _______________________________________________________________________ 55

Logistic Engineering Services __________________________________________________________ 55

Magefekt ____________________________________________________________________________ 56

Mansi on Raymond ___________________________________________________________________ 56

Marand ______________________________________________________________________________ 57

Matrix _______________________________________________________________________________ 57

MEMKO Pty Ltd ______________________________________________________________________ 58

MET OPTIX __________________________________________________________________________ 58

Micro Planning International ____________________________________________________________ 59

Milspec Manufacturing ________________________________________________________________ 59

Moog Australia _______________________________________________________________________ 60

Motherson Elastomers Pty Ltd _________________________________________________________ 60

Nexus Training Solutions ______________________________________________________________ 61

Norton Consultants Pty Ltd ____________________________________________________________ 61

Nova Systems ________________________________________________________________________ 62

Ocean Software Pty Ltd _______________________________________________________________ 62

Opaque Media Group _________________________________________________________________ 63

Pelican-Trimcast Products Pty Ltd ______________________________________________________ 63

Perform Zone ________________________________________________________________________ 64

PHM Technology _____________________________________________________________________ 64

Pilatus Defence Solutions Australia _____________________________________________________ 65

Powerjump __________________________________________________________________________ 65

Precise AMG _________________________________________________________________________ 66

QinetiQ Australia _____________________________________________________________________ 66

Quartek Pty Ltd ______________________________________________________________________ 67

R&I Instrument & Gear Co (Aust) P/L ____________________________________________________ 67

REALM - Solutions For The Future ______________________________________________________ 68

Red Baron Alse _______________________________________________________________________ 68

Refuel International ___________________________________________________________________ 69

Relay Industrial _______________________________________________________________________ 69

22

• Lightweight Composites Design, Analysis and Optimisation• Crashworthiness and Impact Simulation• Novel Composite Materials and Manufacturing Technology

Development• Fire protection technology and simulation

• Testing and Certification• Prototyping, Pre-production and Technology Implementation• Composite and Metal Repair Technologies• Composite and Metal Inspection and Structural Health

Monitoring

CAPABILITIES

ACACIA FOUNDRYwww.linkedin.com/company/acacia-foundry/

Craig WilliamsChief ExecutiveHarbour Glimpses Pty Ltd65 Nirvana Avenue, Malvern East VIC 3145Tel: +61 (0) 438 809 646Email: [email protected]

• Strategic Defence business development consulting• Defence market research• Preparation for Defence readiness• Alliance research, creation and management

• Product research, development and commercialisation• Contract negotiation• Specialist in GIS for telecommunication and utilities• Geospatial and Software analytics

CAPABILITIES

• Australian Welding Solutions• HERE Technologies Inc.• Powercor, Citipower and United Energy

KEY CUSTOMERS

• Member Institute Learning Professionals• Defence Industry Course Alumni

QUALITY APPROVALS & AWARDS

• HERE Technologies Inc.

KEY PARTNERS

• Deep understanding of Australian and international industries; Defence supply chain, geospatial, ICT

• All consultants have Australian security clearances• Extensive database and contact list to help you reach the key

decision makers• Long successful track record in strategic business

development, closure and delivery

• Australian Defence market analysis for your product or service• Successful contract negotiation services• Expert in complex and long sales cycles• Highly qualified staff in law, economics, training and Defence

supply chain

DISCRIMINATORS

ACS AUSTRALIAwww.acs-aus.com

Andre DuarteBusiness Development ManagerAdvanced Composite Structures Australia Pty Ltd198 Lorimer Street, Port Melbourne VIC 3207Tel: +61 3 9676 4951Email: [email protected]

• Department of Defence• EADS / Airbus Group• Thales• Cassidian

KEY CUSTOMERS

• ISO 9001:2015• JEC Asia Innovation Award Winner 2015• JEC Paris Innovation Award Winner 2014• CRC Association Star Award 2013


• aadi Defence• Matrix Composites and Engineering• Pacific ESI

KEY PARTNERS

• Expert knowledge in the design, manufacture and maintenance of composite materials

• More than 25 years of experience in defence related composites technology development and implementation

• Patented materials and manufacturing technologies available for commercialisation

• An interdisciplinary, integrated and flexible design and manufacturing team

• Globally recognised and awarded organisation• Experience in diverse markets including aerospace, defence,

automotive, ground transport, oil and gas• Experience with ITAR related projects• Personnel with current Australian security clearance

DISCRIMINATORS

AEROSPACE CAPABILITY AREAS

PRODUCTS

SERVICES



PRODUCTS

SERVICES








23

AEROSPACE & SPECIALIST COMPONENTSwww.aerospacesc.com

Leon CarterDirectorAerospace & Specialist Components39 Albert Street, Moolap VIC 3224Tel: +61 (0) 400 518 015Email: [email protected]

• CASA approved Part 21G Manufacturing• CASA approved Component Maintenance• CNC Machining and Turning• Precision multi-tasking CNC capabilities

• Solidworks CAD/CAM Software• Prototype to production manufacturing• Specialist tools and equipment manufacturing• Chemical treatment

CAPABILITIES

• Aircraft Modification Specialists• Aircraft Maintenance Organisations• Aircraft Systems & Component Designers• Medical Transport Services

KEY CUSTOMERS

• CASA Approval 803207-1 Manufacture• CASA Approval 1-OA6KG Issue 2 Maintenance


• Sandvik Australia• ThyssenKrupp• Global Metals• Solidworks

KEY PARTNERS

• CASA approved manufacturing facility (CASA Approval 803207-1 Manufacture)

• CASA approved component maintenance (CASA Approval 1-OA6KG Issue 2 Maintenance)

• Complete component or assembly manufacturing tractability

• Latest CAD/CAM manufacturing technology• Product development communication• Proven manufacturing experience• Turnkey solutions• 100% Australian owned family company

DISCRIMINATORS

AEROSPACE AUSTRALIA LIMITEDwww.airshow.com.au

Chris MacfarlaneExecutive Manager Exhibitor RelationsAerospace Australia LimitedPO Box 4095, Geelong VIC 3220Tel: +61 3 5282 0500Email: [email protected]

• The principal activity of AAL is the biennial Australian International Airshow and Aerospace & Defence Exposition

• Promotes aviation and the development of Australia’s aerospace industry

• Promotion of careers and skills through a national program of Careers & Skills Forums around Australia.

• Works closely with not-for-profit industry groups and professional associations

CAPABILITIES

• Department of Defence• Aviation Industry• Manufacturing Industry• Research & Development

KEY CUSTOMERS

• Royal Australian Air Force• Defence Capability and Sustainment Group• Defence Science and Technology Group• Department of Industry, Innovation & Science

KEY PARTNERS

• A global business event, attracting senior aviation, aerospace and defence industry, military and government

• Strongly supported by the Royal Australian Air Force, Airservices Australia and CASA

• Australian & International Air Chiefs

• International Aerospace Industry Supply Chain Seminars• A not-for-profit group headed by Aerospace Maritime Defence

and Security Foundation of Australia Limited• Significant program of conferences, seminars and symposia

DISCRIMINATORS


PRODUCTS

SERVICES






PRODUCTS

SERVICES


24

AEROSPACE MATERIAL PTY LTDwww.aerospacematerials.com.au

Derek ChenhGeneral ManagerAerospace Material Pty Ltd6 Ovata Drive, Tullamarine VIC 3043Tel: +61 3 9338 6995Email: [email protected]

• Hysol Metal to Metal Structural Adhesives• Composite Resins, Fillers and Potting Compounds• PR & PS Fuel Tank and General Sealants• Alodine and Anti-Corrosion Treatments

• Aircraft Grade Aluminium & Titanium• Laminated Shims• Ball, Roller and Rod End Bearings• All certified and traceable

CAPABILITIES

• Quick Step -JSF Project• Marand Engineering -JSF Project• ASC- Air Warfare Destroyer Project• BAE- Defense through life support projects

KEY CUSTOMERS

• AS 9120 RevA (Certified by LRQA)• ISO 9001:2008 (Certified by LRQA)• IAQG “OASIS” Registered• Registered under UKAS scheme


• Henkel GMBH Adhesives• RTI Corporation- Titanium• AMI Metals- Aluminium• Wencor Corp-Bearings

KEY PARTNERS

• Proven Track record in Defence Projects• Only fully Australian owned company in our field• Five temperature zone monitored warehouse• Time and Temperature sensitive materials specialists• ITARS & EAR Trained and Experienced Staff

• Metals, Adhesives, Sealants and Surface Treatments Stocked in Melbourne

• Weekly Consolidated Dangerous Goods Air Freight Shipments from Europe and USA

DISCRIMINATORS

AGILITY LOGISTICS PTY LTDwww.agility.com

Michael BacarellaCorporate Business Development ManagerAgility Logistics Pty Ltd28-32 Sky Road, Melbourne Airport VIC 3045Tel: +61 3 9339 0888Email: [email protected]

• Freight Forwarding Services in Air, Ocean, Customs & Road Transportation

• 3PL & 4PL Contract Logistics Services• Warehousing, Storage & Packaging• Transportation, Distribution & Procurement Solutions

• Defence and Government Services & Humanitarian Logistics• Specialty Services in Project Logistics, Fairs & Events

Logistics, Chemical Logistics and Fuel Logistics• Freight Management, IT & Supply Chain Solutions.• Customs Clearance Consultancy and Landside Services

CAPABILITIES

• ASC• UK Ministry of Defence• US Defence Logistics Agency• United Nations

KEY CUSTOMERS

• ‘Vision Zero Accident’ Program• ‘Be Safe, Stay Safe’ Program• AS/NZA ISO 14001 (2010)• ISO 9001:2008 (QMS 2010)


• Agility Defence & Government Services• Agility Project Logistics• Agility Global Integrated Logistics• Agility Fairs & Events Logistics

KEY PARTNERS

• Global Integrated Logistics specialising in complex Defence Industry solutions

• Top 10 Global Logistics (3PL) Provider and Industry Leader in Emerging Markets

• Extensive Global Network | 500 Offices | +100 Countries | 22,000 Employees

• Global technology platform supporting full visibility of supply chain logistics solutions

• Defence Industry expertise with project management teams ensuring critical response in challenging situations

• Defence Project Risk Management planning, identification, analysis, monitoring and control

• Past experience in International Government and Military environments

• Diverse experience in Australian Industry with Project Logistics in Energy, Oil, Gas, Mining & Water

DISCRIMINATORS


PRODUCTS

SERVICES


Materials Technology AEROSPACE CAPABILITY AREAS

PRODUCTS

SERVICES


25

ALL SAT COMMUNICATIONSwww.allsat.com.au

Ian VeitchDirectorP I Plus Pty Ltd111 Lewis Road, Knoxfield VIC 3180Tel: +61 1300 747 587Email: [email protected]

• Industry leader for expertise and knowledge in satellite communications

• Major distributor of satellite safety, voice, tracking and data products

• Lone and Remote worker monitoring and tracking specialists

• Distributor of RAM Mounts suitable for mounting electronic & other equipment for land, air and marine applications

• Expert advice on all products and the ability to assist from trials through to implementation stage

• Full back up support and servicing of all products

CAPABILITIES

• Department of Defence• Australian Border Force• Australian Maritime Safety Authority (AMSA)• Air Ambulance Victoria

KEY CUSTOMERS

• 2008 - Australian SPOT Distributor• 2014 - Australian Ocean Signal Distributor• 2014 - Ocean Signal Service Accreditation• 2017 - Digital Yacht & Echomax Distributor


• Ocean Signal UK - rescueME / SafeSea• National Products Inc USA - RAM Mounts• Digital Yacht UK - AIS & Wi-Fi Equipment• Echomax UK - Passive & Active Radar Reflectors

KEY PARTNERS

• Established in 2000 and Melbourne Based• Satellite Communications Specialists for voice, tracking and data• Staff with extensive backgrounds in Search & Rescue, Defence

and Marine industries• Proven support of all products from trial to implementation stage

• Worlds smallest and most advanced satellite safety products• Industry Leading products for quality and value• Expert product knowledge and advice• Time critical supply of parts and products

DISCRIMINATORS

ALTAIR ENGINEERINGwww.altairengineering.com.au

Alex QuirkTechnical ManagerAltair Engineering Software Pty Ltd512/1 Queens Road, Melbourne VIC 3004Tel: +61 3 9866 5557Email: [email protected]

• Altair HyperWorks is the most comprehensive, open-architecture, multi-physics CAE platform

• Altair ProductDesign consultancy deliver product engineering services from concept development to maintenance

• Finite Element Analysis (FEA) - linear and non-linear implicit and explicit

• Design optimisation - minimise mass, maximise stiffness, minimise fatigue, tune CoG

• Blast and crash simulation• Electro-magnetics simulation - High and low frequency

simulation and optimisation and wave propagation• Computational Fluid Dynamics (CFD) with Fluid-Structure

Interaction (FSI)• Multi-Body Dynamics (MBD)

CAPABILITIES

• Aerospace: Airbus, Boeing, Lockheed Martin, Raytheon• Automotive: Ford, Ferrari, Mercedes, Porche, TESLA• Defence: BAE Systems, Thales, Australian DoD, US DoD• Marine: Naval Group, British Aircraft Carrier Alliance, US Navy

KEY CUSTOMERS

• 2010 Boeing Performance Excellence Award• NASA Engineering and Safety Centre Group Award• 2012 Top Design Software Brands in the Electronics Industry• 2012 Gold Stevie


• Engineering: nCode, FEMFAT, Materialise, MapleSim• Engineering: ESAComp, Moldex3D, Fluidyna• Engineering: MADYMO, Airbus STRENGTH2000• Computing: Microsoft Azure, SGI, Cray, HP, Amazon AWS

KEY PARTNERS

• Over 30 years experience and over 5000 customers• Combination of engineering software and services means our

software gets the most rigorous testing, and our engineers have direct access to the developers

• Industry leading optimisation tools allow you come up with reliable minimum mass designs first time

• Extensive experience across all industry verticals, from subsea to aerospace

• Trusted by the worlds leading OEMs and suppliers• Altair HyperMesh is the industry leading finite element

preprocessor• Airbus have chosen HyperMesh and HyperView as their global

prefered pre/post solution• Multi-physics capabilities allow you to design whole systems

within one environment

DISCRIMINATORS


PRODUCTS

SERVICES


Integration




PRODUCTS

SERVICES


Autonomous Systems







26

AME SYSTEMS (VIC) PTY LTDwww.amesystems.com.au

Adam BurgerSales ManagerAME Systems (VIC) Pty Ltd18 Gordon Street, Ararat VIC 3377Tel: +61 3 5352 9000Email: [email protected]

• Design, system integration and manufacture of complex electrical wire harness and sub assemblies

• Wiring and assembly of dashboards, control boxes & complete value add assemblies including supply chain management

• Manufacture to IPCWHMA-620 and military specifications• Custom made battery cables

• CAD 3D drawing, 3D printing, design and prototyping• Design assistance and prototyping for production volumes• Through life support• Radio frequency cables and associated testing (insertion loss,

return loss and hi pot testing)

CAPABILITIES

• Thales, Supacat, Varley• Caterpillar, Bombardier• Kenworth Trucks, Volgren• Mahindra Aerospace

KEY CUSTOMERS

• ISO 9001:2008 certified• Manufacturing Hall of Fame inductee• 2015 Business achievement award winner


• TE Connectivity• Tycab Australia• Cambridge Technologies• ITT Canon

KEY PARTNERS

• Rapid prototype, low volume and short lead time capability• 30+ years experience in wire harness manufacture• Experience designing complete vehicle electrical systems

• Highly competitive - low cost manufacturing base• Micrographing (cross sectioning) of terminations

DISCRIMINATORS

AMIGA ENGINEERING PTY LTDwww.amigaeng.com.au

Michael BourchierManaging DirectorAmiga Engineering Pty Ltd9-11 Silicon Place, Tullamarine VIC 3043Tel: +61 3 9330 0688Email: [email protected]

• Metal 3D printing -3 x Metal 3D printers in-house (2 PDmp320 print bed: 275x275x420 SLM280 print bed: 280x280x350)

• 2 off ProXDMP320 Metal 3D printers print bed 275x275x420 + 1 off SLM280HL Metal 3D printer print bed: 280x280x350

• Mazak Integrex i200S - 5 Axis CNC Machining• In-house machining - CNC Milling up to 4.3 Metres

• In-house machining - Wash grinding to 1.2 Metres• In-house machining - CNC Turning & Vertical Boring diameters

up to 2.8 Metres• Australian Made & Owned brand “Genat and Wood” Industrial

gearboxes, VSD & Mixer drives• Light Fabrication and Assembly

CAPABILITIES

• Suez Oil & Gas (Process Group)• Textron Systems (Aerosonde)• Australian Submarine Corporation• Woodside Petroleum

KEY CUSTOMERS

• ISO 9001:2015• Australian Made & Owned• Victorian Achievers Award Nom for business’18


• Vulcan Steel (Steel Engineering Dept)• Ferrous Forgings• Bearing Wholesalers• Ronson Gears

KEY PARTNERS

• Only privately owned commercial service factily for Australia that provides Metal 3D Printing located in Victoria

• Large Component Expertise & Capbility Prototyping• Forging and Casting Commissioning and Processing• Precision Mechanical Assembly

• Manufacturer of Genat and Wood gearboxes proven to run for 30+ years (compared to cheap imported gearboxes)

• Vehicle component manufacture OEM Supply• Extensive Material Traceability Records• Electronic MDR for all Major Projects

DISCRIMINATORS


PRODUCTS

SERVICES

Autonomous Systems



Information Systems



PRODUCTS

SERVICES






27

AMOG CONSULTINGwww.amog.consulting

Cherie HollandDirectorAMOG Pty Ltd19 Business Park Drive, Notting Hill VIC 3168Tel: +61 3 9542 3700Email: [email protected]

• System Safety iaw ARP4754 including the application of RTCA DO-254

• Software Safety iaw ARP4754 including the application of RTCA DO-178

• Software Assurance iaw RTCA DO-178 B or C including Baseline Assessment Software

• Allocation of Design Assurance Levels (DLAs) through FHA including the DAL Verification

• Safety Management System and Safety Planning iaw ICAO standards

• Reliability, Availability and Maintainability (RAM) studies including full lifecycle cost modelling

• Advanced analysis through Computation Fluid Dynamics (CFD) and Structural assessments

• System Safety Management Master Class and System Safety Application training courses

CAPABILITIES

• Australian Aerospace, Boeing, SAAB, Indra• Raytheon, Rohde and Schwarz, Tenix, BAE Systems• ADI, AMC, ASC, CAE, Thales, UGL• RAAF, RAN, Army, DMO (now CASG), DGTA, DGNCSA

KEY CUSTOMERS

• ISO 9001:2008, Quality Management Systems• AS/NZS 1801:2001 and OHSAS 18001:2007• ISO 14001:2004• Multiple Engineers Australia Excellence Awards


• Monash University

KEY PARTNERS

• Proven track record working with Defence and Defence Prime Contractors for over 15 years

• Significant working experience with DGTA, POs and SPOs• One of the largest System Safety capabilities domestically,

with professionally qualified Safety engineers• Specialist advanced modelling capability for analysis,

simulation and testing

• Specialist software assurance capability for Software SIL assessments and expert advice

• Significant operational experience with senior ex-Defence staff members

• Multiple staff with Australian Defence security clearances• DISP Accreditation

DISCRIMINATORS

AMPHENOL AUSTRALIA PTY LTDwww.amphenol.com.au

Stephen RichardsSales and Marketing DirectorAmphenol Australia Pty Ltd22 Industry Boulevard, Carrum Downs VIC 3201Tel: +61 3 8796 8888Email: [email protected]

• Australian assembled Harsh Environment Fibre Optic harnesses and cable solutions

• Fibre-to-Antenna (FTTA) Connector solutions in a rugged, affordable package

• EN4644 APeX Rectangular high-density modular connection system

• EMI & EMP protections solutions for sensitive circuits

• High speed data transmission interconnects to 10Gb/s and beyond• Hermetically sealed and filtered, gas tight barriers and

highpressure solutions• RF/ Microwave coaxial connectors, cable assemblies and

passive components• LDG P-Clamps secure, guide and manage high performance

aerospace cables and pipes through aircraft

CAPABILITIES

• Boeing• Thales• BAE Systems• Airbus Industries

KEY CUSTOMERS

• ISO 9001:2008


• Amphenol Military & Aerospace Operations• Amphenol Socapex S.A.S.• Amphenol Limited• Amphenol Fiber Systems International

KEY PARTNERS

• World leader in the design, manufacture and supply of high-performance interconnect systems for harsh environments

• Unparalleled product breadth of military specification connectors

• A technology leader participating in major Aerospace programs from the earliest inception to full production

• Leading supplier of interconnect solutions to the aircraft engine market.

• Australian based fibre optic cable assembly facility• Local Engineering design and support team for interconnect

solutions

DISCRIMINATORS


PRODUCTS

SERVICES






PRODUCTS

SERVICES




28

ANCA PTY LTDwww.anca.com

Andrew RitchieProduct ManagerANCA Pty Ltd25 Gatwick Road, Bayswater North VIC 3153Tel: +61 3 9751 7368Email: [email protected]

• Design and manufacturer of CNC Tool & Cutter Grinder machines, for grinding precision cutting tools and components

• Industry leading tool design and grinding software, which is highly advanced, user-friendly and flexible

• Wide range of quality machines capable of accurately grinding various cutting tool types, turbine blades, bearings

• ANCA has provided customised and innovative solutions for general and specific market needs since 1974

• OEM manufacturer of CNC products, including servo-motors, servo-drives, HMI, I/O devices, control systems, etc

• Integration capability with CAM software• Capability to provide custom motion control solutions

CAPABILITIES

• Boeing• Lockheed Martin• GKN Aerospace• Spirit Aerosystems

KEY CUSTOMERS

• ISO 9001• Australian Export Awards Hall of Fame 2016• Australian Export Award - Manufacturing 2015• Governor of Victoria Export Awards - Manu. 2015


• Precorp Inc.• ANCA Motion• Williams International

KEY PARTNERS

• Vertically-integrated company that supports the entire manufacture process of CNC Tool & Cutter Grinder Machines

• Global market leader in CNC Tool & Cutter Grinder customised turn-key solutions

• Due to its large R&D and technology investment since 1974, ANCA has achieved several significant innovation firsts

• Export proven over 30 years, having exported 6,000+ CNC machines to over 50 countries

• Global support network of Sales, Applications and Service throughout the Americas, Asia, Europe and Australasia

DISCRIMINATORS

ANYWISEwww.anywise.com.au

Adam EvansManaging DirectorAnywise Consulting Pty Ltd10 Nash Street, Brunswick VIC 3056Tel: +61 3 9078 6938Email: [email protected]

• Advanced Manufacturing ERP Systems• Additive Manufacturing Power Tracing and ERP Systems• Audit Apps• Collaboration and data visualisation platforms and services

• Program and Project Management• Integrated Logistics Support• Supply Chain Optimisation• Engineering

CAPABILITIES

• Jacobs• Dept of Defence• KBR• KPMG

KEY CUSTOMERS

• Certified B Corporation


• Valuechain UK• Mavenlink

KEY PARTNERS

• High Level Security Clearances• Integrated Digital ERP and collaboration solutions• Valuechain Regional Partner

• Mavenlink Partner• Certified B Corporation

DISCRIMINATORS


PRODUCTS

SERVICES



Information Systems

Integration





PRODUCTS

SERVICES

Autonomous Systems


Integration



29

AOSwww.aosgrp.com

Dr Andrew LucasManaging DirectorAgent Oriented Software Pty Ltd580 Elizabeth Street, Melbourne VIC 3000Tel: +61 3 9349 5055Email: [email protected]

• AOS is a world-leader in Artificial Intelligence, particularly autonomous systems development

• iWD - Intelligent WatchDog, autonomously coordinates multiple unmanned surveillance systems on Land, Air & Sea

• IBA - Intelligent Battlespace Advisor, autonomous support for Joint Situational Assessment & Resource Planning

• Formidable Foes, autonomous targets for live fire training• TacSim - Tactical Simulation for Undersea Warfare, developed

by AOS with DST• C-BDI - Reasoning Platform• CoJACK - Cognitive Architecture• JACK - Reasoning Platform

CAPABILITIES

• RAAF• UK Ministry of Defence• Equinor• Lockheed Martin Aero

KEY CUSTOMERS

• Australian Department of Defence• RMIT, Sydney & Melbourne Universities• Australian Road Research Board• Northrop Grumman

KEY PARTNERS

• TacSim simulator used by DST Group to support the SEA1000 Program

• Our products have proven track records in defence, simulation & training, and heavy industry

• AOS’s intelligent agent software is the 1st product series worldwide based on the BDI model of human reasoning

• CoJACK models variations in human behaviour making virtual actors in simulations more lifelike and realistic

• C-BDI models intelligent decision-making for demanding, safety-critical applications

DISCRIMINATORS

APPLIED CCMwww.appliedccm.com.au

Dr Darrin StephensDirectorApplied CCM Pty LtdFactory 14, 756 Burwood Highway, Ferntree Gully VIC 3156Tel: +61 3 8376 6962Email: [email protected]

• Computational Fluid Dynamics• Mesh generation software

• Overset hole cutting software

CAPABILITIES

• DST Group• CSIRO• Australian Maritime College

KEY CUSTOMERS

• Pointwise Inc• Celeritas Simulation Technology LLC• DCS Computing GmbH• Applied CCM Canada

KEY PARTNERS

• Australian security cleared staff• Proven record of supply to defence• Best in class CFD mesh generation

• Open source CFD solvers• Best in class overset software• In depth technical expertise

DISCRIMINATORS


PRODUCTS

SERVICES


Autonomous Systems

Information Systems



PRODUCTS

SERVICES


Information Systems



30

APPLIED FASTENERS AND TOOLING PTY LTDwww.appliedfastenersandtooling.com

Colin CampbellGeneral ManagerApplied Fasteners and Tooling Pty Ltd100 Harbour Esplanade, Docklands VIC 3008Tel: +61 3 9939 8979Email: [email protected]

• Specialised Fastening systems and assembly tooling• Structural bonded fasteners and tooling• Threaded fasteners and Inserts an associated tooling• Blind fasteners and tooling

• Specialised cutting tools and consumables• Temporary fasteners• Quick release pins and lanyards• Technical support and training

CAPABILITIES

• Boeing, Airbus, BAE, Sikorsky, Jetstar, • Virgin, Airflite, Marand, Quickstep, • Lovitt Technologies, Supacat, Broens, Thales, • Aerosonde, Trakka

KEY CUSTOMERS

• AS9120B, BAE, Airbus, Boeing• LMA-PK004• Department of Defence Cage Code Z0TF6• Factory approval for key manufacturers


• Click Bond, Arconic, Monogram• Cherry Aerospace, Avibank• Lubbering, Centrix, Perfect Point• Zephyr Tool, Everede, JIFFY

KEY PARTNERS

• Defence programs are our core business• Our customers see us as a trusted source of information and

support not normally offered by distributors• Through extensive consultation, customers have access to our

vast assembly application experience• We understand the relationship between design, procurement,

production and maintenance/repair

• We offer technical support throughout the product life cycle• Certified in product training• We offer multiple solutions to maximise design options in

addition to increasing assembly efficiency and safety• We are happy to collaborate with the industry to ensure the

required positive outcome for our customers

DISCRIMINATORS

APVwww.apvcorporation.com

Harry HicklingDirectorAustralian Performance Vehicles Pty Ltd1521 Hume Hwy, Campbellfield VIC 3061Tel: +61 3 9355 5574Email: [email protected]

• International OEM for Military Restraints and Seatbelts for Land and Amphibious Military Vehicles

• Crash & Safety Testing, Environmental & Life Cycle Testing, Mechanical & Dynamic Testing

• Field testing with Data Acquisition and High Speed Imaging, including military applications

• Personal Survivability and Safety Testing for military and aerospace. (An ADF Priority Industry Capability, PIC)

• Helicopter, Military, Automotive and Transport Seat testing• Durability, vibration and dynamic crash for Composite

Structures, Electronics, Assemblies and Vehicles• Cargo Retention testing, vehicle accessories and fabricated

component testing• International OEM of seatbelts for Trucks, Ground Support

Equipment and Material Handling Equipment

CAPABILITIES

• ADF, CSIRO, Thales Australia, Sikorsky, BAE Sys• ANCAP and International Automotive Companies

KEY CUSTOMERS

• ISO/IEC 17025:2005• ISO 9001:2015• FIA certified Motorsport Lab• Export Control Plan and Permits in place


• Humanetics and DTS for supply of test equip.• Benchmarking with a Japanese OE Auto Company

KEY PARTNERS

• Seatbelts and Restraints that are Battle Proven and tested to the highest levels of Performance

• The APV Test Centre is the most advanced industrial test facility of its type in the Southern Hemisphere

• Track record in testing services for Military MRAP Vehicles and Applications

• Supports Australia’s Advanced Manufacturing sector with test programs for advanced product development

• The Test Centre is an R&D Lab supporting unique test programs with a highly experienced engineering team

• Environmental and Corrosion test programs, completed to both commercial and US Mil-Spec requirements

• Provides testing services to international standards, including FMVSS, ECE and ADR

• Track record in supporting Advanced Manufacturing, Defense and Aerospace, Rail, Truck, Automotive, and Transport

DISCRIMINATORS


PRODUCTS

SERVICES


Autonomous Systems



Information Systems

Integration







PRODUCTS

SERVICES







31

ATTARwww.attar.com.au

Dr Adrian GrosvenorGeneral Manager Engineering Consulting & Principal EngineerEngineering Materials Evaluation Pty LtdUnit 1, 64 Bridge Road, Keysborough VIC 3173Tel: +61 3 9574 6144Email: [email protected]

• Experienced engineers providing independent and expert advice in Materials evaluation and Mechanical testing

• Forensic failure analysis (includes determining root cause, life cycle and compliance assessment)

• Specialty testing in Acoustic Emission Monitoring of vessels and structures

• Audit Services, Document design and Tender review• Non Destructive Testing Level 3 consulting; technique

validation, procedure and specification writing & review• NDT Training in all Methods• NDT Qualification & Proficiency Testing of Personnel

CAPABILITIES

• ASC• Babcock International Group• Large Customer base throughout Australasia

KEY CUSTOMERS

• NATA accredited to ISO 17025• Registered Training Organisation (RTO)• Authorised Qualifying Body (AQB) AINDT & BINDT


• Infracorr Consulting Pty Ltd

KEY PARTNERS

• ATTAR is committed to the highest standard of service delivery and customer satisfaction

• Australian owned with over 30 years experience• Advance non-destructive testing techniques

• Consulting engineers specialising in materials evaluation and mechanical testing

• Registered Training Organisation (RTO) and Authorised Qualifying Body (AQB) for Non-Destructive Testing

DISCRIMINATORS

AUSTEST LABORATORIESwww.austest.com.au

Rob WeirSite SupervisorAustest Laboratories2 Brex Court, Reservoir VIC 3073Tel: + 61 3 9464 4016Email: [email protected]

• Accredited Test Laboratory covering Environmental, EMC, Electrical and Telecommunication testing

• Mechanical tests including vibration, shock, constant acceleration, impact, inclination, fatigue, static load & IP

• Environmental tests including climatic, UV, solar, salt-fog, altitude and pressure

• Airborne and structure-borne noise testing• EMC/EMI tests including radiated/conducted susceptibility

and emissions• Electrical tests including Surges, ESD and transient burst

testing• Engineering consultancy services

CAPABILITIES

• Raytheon Australia• Boeing Defence Australia• Thales Australia• BAE Systems Australia

KEY CUSTOMERS

• ISO/IEC 17025• A2LA Accreditation no. 2765.01 (Melbourne)• A2LA Accreditation no. 2765.02 (Sydney)


• Approval Specialist Pty. Ltd. (parent company)

KEY PARTNERS

• “One Stop Shop” - a single source for environmental, EMC, electrical and telecommunication testing

• Formal accreditation for defence standards: MIL-STD-461, 810, 167, 202, DEFSTAN00-35, RTCA-DO160, etc

• Defence knowledge and experience. Test engineers with over 40 years of combined experience in the defence industry

• Largest electrodynamic shaker in Aust capable of vibration & shock (classical & SRS) testing of equipment up to 2t

• Expertise in extreme and customized environmental testing• EMC pre-compliance and compliance testing for all stages of

product design• Proven track record with leading defence contractors -

Raytheon, Boeing, Thales, SAAB, BAE Systems etc

DISCRIMINATORS


PRODUCTS

SERVICES







PRODUCTS

SERVICES




32

• CASA Part 145 helicopter Maintenance, Repair and Overhaul (MRO)• Component MRO• Aircraft structural repair and helicopter drivetrain alignment• Tailored aircraft refurbishment, life extension programs and

avionics upgrades

• CASA Part 21G aeronautical parts manufacturing and sheet metal repairs and fabrication

• Precision CNC machining• Painting and chemical treatment• Engineering design for modifications and repairs (CASA Part 21M)

CAPABILITIES

• Department of Defence• BAE Systems• Pennant Australasia• QBE

KEY CUSTOMERS

• CASA PART 145 MRO• CASA PART 21G Production Certificate• Defence Recognised Supplier (LoRS)• ISO 9001 : 2015 + AS9100D / AS9110C / AS9120B


• Arrow Falcon Exporters• Monroe Aerospace

KEY PARTNERS

• Dedicated CASA Part 145 MRO company with extensive tooling• CASA Part 21G Manufacturing• CASA Approved helicopter fixtures• OEM trained and experienced LAMEs• CASA approved to conduct Deep Level Maintenance on

medium and light platforms

• Controlled spare parts store with over 15,000 line items• Exclusive aerospace hardware distributor for Monroe

Aerospace in Australia• Strategic regional geographic location

DISCRIMINATORS

AVALON AIRPORT AUSTRALIAwww.avalonairport.com.au

AUSTRALIAN AEROSPACE ENGINEERINGwww.austaerospace.com

Justin GiddingsCEOAvalon Airport Australia Pty Ltd80 Beach Road, Avalon VIC 3212Tel: +61 3 5227 9112Email: [email protected]

Adam JohnstonEngineering ManagerAustralian Aerospace EngineeringPO Box 459, Jindera NSW 2642Tel: +61 2 6026 2614Email: [email protected]

• Avalon Airport is located around 30 minutes from Melbourne. It is a Defence owned airport leased to Linfox

• Avalon Airport has the capacity to accommodate all aircraft types and comprises over 1,700 hectares of land

• Avalon Airport is curfew free, and has enormous capacity for expansion and offers a secure environment between Melbourne and Geelong

• Avalon Airport flies both domestically and internationally, with a brand new international terminal and facilities built in 2018

• Avalon Airport has the appropriate planning regime to accommodate industrial, defence and aviation activities

• Avalon Airport is located close to major seaports, a freeway and rail making logistics easy

• Avalon Airport is host of the biennial Australian International Airshow and regularly hosts defence aircraft

• The Avalon Airport Industrial Precinct officially opened in October 2018 with a bespoke build for anchor tenant Cotton On Group: a 35,000sqm national distribution centre

CAPABILITIES

• Linfox Australia• Australian Automotive Research Centre• Department of Defence

KEY PARTNERS

• A large aircraft capacity airport within a green field environment

• Large hangars available for immediate use at a large airport

• Synergies with Australian International Airshow• Flexible planning arrangements on a Department of Defence

owned airport

DISCRIMINATORS


PRODUCTS

SERVICES


Autonomous Systems








PRODUCTS

SERVICES


33

A.W. BELL PTY LTDwww.awbell.com.au

Vinesh KaranCommercial DirectorAW Bell Pty Ltd145 Abbotts Road, Dandenong South VIC 3175Tel: +61 3 8773 7527Email: [email protected]

• Manufacturer of complex metal components and assemblies with high mechanical properties for Defence applications

• Highly vertically integrated manufacturer of fully finished ready to use Investment and sand casting

• Collaborative design for function and manufacture capability• Rapid prototyping into metal for representative development

and testing, low volume production

• Precision production machining, assembly, NDT, certification, logistics, project management

• Steels including high-strength low-alloy, stainless, duplex & super duplex stainless, cryogenic and others

• Aluminium, nickel aluminium bronze, cast irons and other ferrous and non-ferrous grades

• Size envelope to 600 X 600 X 700mm approx

CAPABILITIES

• Northrop Grumman - F35 EODAS sub-assemblies• Marand - F135 engine change trailer• BAE Systems - Sea Sparrow, Nulka and F35• ASC - Collins sustainment for engine and pumps

KEY CUSTOMERS

• AS9100C, SAI Global• ISO 9001, ISO 14001:2008, SAI Global• 2016 - Victorian Export Award - Manufacturing• 2013 VIC Manufacturer of the Year - Medium


• CASG Global Supply Chain programme• CASG Joint Strike Fighter Division• Single Business Service• AIDN-Vic

KEY PARTNERS

• Aluminium Billet Equivalent (ABEª) casting process, ultra high strength aluminium investment castings

• Rapid prototyping into metal for all grades allowing proof of concept, testing, or low volume production runs

• Experts in manufacturing complex and intricate parts in all materials

• Manufacture of high-quality nickel alloy bronze, duplex, super duplex and general stainless steels products

• Flexibility and responsiveness to changing customer needs• Established and proven supplier of world class defence and

aerospace parts (F35 Strike Fighter, Collins Class)• Proven global export experience with long term customers in

North America, Europe and Asia• Strong, dependable and reduntant supporting supply chain

DISCRIMINATORS

BAE SYSTEMSwww.baesystems.com/australia

Tony MartinManager, Australian IndustryBAE Systems Australia Pty Limited40 River Boulevard, Richmond VIC 3121Tel: +61 8 8480 7453Email: [email protected]

• A leading provider of total aircraft and mission systems sustainment and upgrade services to the ADF

• The only Australian Guided Weapons systems design, integration and through-life support capability

• World leading autonomy, navigation, guidance and control solutions for Missile and unmanned systems

• Sensor systems development, integration and support

• Advanced manufacturing and hard metal machining for aerospace products

• System simulation and modelling• Project Management, Systems Engineering, ILS and Supply

Chain Management for Complex Programmes• Training design and delivery

CAPABILITIES

• Australian DoD (CASG, DST Group, ADF)• US Navy• Various other US and NATO defence customers• Air Force Training Group (AFTG)

KEY CUSTOMERS

• ISO 9001 Accreditation• DASR Part 145 & 21J Approvals• Australian Register Training Organisation (RT)


• BAE Systems plc (parent company)• Various Global & Australian Defence Primes• Various Australian SMEs• Various Australian Universities

KEY PARTNERS

• Complete life-cycle capability for aerospace and related systems, from concept design to production and support

• Highly qualified engineers, scientists and technicians developing leading edge defence & aerospace solutions

• Safety critical and Flight certifiable software development capability

• Proven track record of complex defence project management and delivery in a vertically integrated company

• Defence Security and ITAR cleared workforce and facilities

DISCRIMINATORS


PRODUCTS

SERVICES






PRODUCTS

SERVICES


Autonomous Systems



Information Systems

Integration






34

BARON RUBBERwww.baronrubber.com

Fabian BettiolBusiness Development ManagerBaron Rubber Pty Ltd5-15 Lakeside Drive, Broadmeadows VIC 3047Tel: +61 3 9357 4767Email: [email protected]

• Baron is global leader in the supply of custom moulded silicone, rubber & plastic components

• In-house engineering & design departments are capable of developing moulds & turnkey production cells

• We have in-house chemists & laboratories to test environmental, tensile, durability & dynamic material properties

• We have multiple production facilities

• Baron exports to the USA, Europe, New Zealand, Brazil, India & Asia

• Baron has the capabilities to supply custom moulded components to all Defence sectors; NAVY, ARMY & AEROSPACE

• Over moulding onto various substrates; steel, aluminium, plastic, glass, etc.

• Sub-assembly post processes for supply of over moulded components

CAPABILITIES

• Thales• L3• ResMed• Schneider Electrical

KEY CUSTOMERS

• ISO 9001• ISO 13485• GMP• APVMA


• Wacker & Dow Corning• Lotte & Bayer

KEY PARTNERS

• Baron offers customised moulded silicone & rubber solutions for the Aerospace sector

• We develop components in collaboration with the Aerospace sector• Baron can cater for both high & low volume production• We have multiple facilities to manage cost targets & can

distribute globally & support implant medical devices

• As a certified supplier to the medical sector, we also have robust verification & validation production processes

• Baron is capable of supplying PPAP documentation, including Cpk run charts, DFMEAs, PFMEAs and metrology data

DISCRIMINATORS

BARTLETT MANUFACTURINGwww.bartlett.net.au

Tim SkewesDefence SalesC.E. Bartlett Pty Ltd172 Ring Road, Wendouree VIC 3355Tel: +61 3 5339 3103Email: [email protected]

• Product Design and 3D Modelling• Synthetic Products Manufacturing• Canvas Products Manufacturing• Tents & Tarpaulins

• Vehicle & Trailer Canopies & Covers• Signature Management Covers• Storage Bags & Equipment Covers• Corrosion Protection Covers

CAPABILITIES

• Rheinmetall• Thales Group• Varley Group• Supacat

KEY CUSTOMERS

• ISO 9001:2015 Certification• Victorian Manufacturing Hall of Fame


• Wax Converters Textiles

KEY PARTNERS

• Industry leader since 1956• Four purpose built factories with 8000sqm of production floor

space and four computerised plotter cutter tables• Over 30 welders comprising hot air, hot wedge, high frequency• Over 50 computerised sewing machines for multiple

applications

• Ability for large scale and large volume projects with accuracy and repeatabilty

• Product Design and 3D Modelling• Customised QA processes meeting customer deliverables• Proven supplier of multiple products to ADF, Primes and

Sub-Primes

DISCRIMINATORS


PRODUCTS

SERVICES





PRODUCTS

SERVICES



35

BEAK ENGINEERINGwww.beak.net.au

Phillip ShirleyBusiness Development ManagerBeak Engineering (Aust)7 Walker Street, Braeside VIC 3195Tel: +61 3 9587 0255Email: [email protected]

• Electrical Design & Engineering specialising in 400Hz and 28.5VDC aircraft ground power

• Systems Engineering Support• Integrated logistics support• Marine aviation refueling systems MRO and TLS

• Only manufacturer of Australian Ground Power Units - over 350 in service world wide

• Tarmac Cable handling systems• Marine aviation support systems - VLA, tie-downs, helo

capture systems, 400Hz power, deck lighting

CAPABILITIES

• CASG - NASPO, AMSPO, LHDSPO, FFHSPO, MCPSPO• Qantas, Boeing, Emirates• MELAIR, SACL• NZDF

KEY CUSTOMERS

• ISO 9001 (2015)• DRS


• Deshons• Langa• Indal Technologies• PCI Gases

KEY PARTNERS

• Beak has provided CoA vast savings through reduced cost of ownership by managing marine aviation systems for ADF

• Over 400 Beak GPU’s operational in the ADF• Beak has achieved an excellent reputation through the

manufacture, supply and support of our GPU’s• One of only a few companies in Australia to be awarded 3500

district warehousing and TLS of Defence assets

• 100% Australian-owned and run Defence Industry company with proven performance.

• Fully integrated cost management systems to reduce system through life cost for clients

• Beak provides RAN rapid response field service teams for URDEFs worldwide for their deployed aircraft handlers

• Beak’s VIC facility has a secret clearance classification

DISCRIMINATORS

BLACK STUMP TECHNOLOGIESwww.blackstumptechnologies.com.au

Martin OakleyBusiness Development ManagerBlack Stump Technologies Pty Ltd35-37 Nissan Drive, Dandenong South VIC 3175Tel: +61 3 9793 6088Email: [email protected]

• Turn-key, 100% solar powered, air transportable Chillers (463L)• Turn-key, 100% solar powered, air transportable Freezers (463L)• Turn-key, 100% solar powered, air transportable

uninterruptable power supplies (463L)

• Turn-key, 100% solar powered, air transportable water purifiers (463L)

• Turn-key, 100% solar powered, air transportable mortuaries (463L)

CAPABILITIES

• Australian Defence Force - RAAF• Australian Defence Force - Army• DSTG• DFAT

KEY CUSTOMERS

• ISO 9001:2015 QA• 2018 ARIAH Finalist: Product of the Year• Winner: 2016 Innovator of the Year - CCN-HVACR• Finalist: 2016 Land Defence Australia Industry


• Heuch Refrigeration• Able Engineering Industries• ABB

KEY PARTNERS

• Complete through-life service provider, design to decommission, for specialised refrigeration and energy systems

• Fast prototyping through to volume manufacture• Full field servicing with in-house, real time engineering support• Haz-Op and MilSpec design and manufacturing

• 40 year history of providing solutions to Austrailan Defence Forces

• Deploy anywhere: NATO 463L air transportable units to 10’, 20’ and 40ft ISO containers plus custom units avaliable

• Operate anywhere: Onboard renewable energy systems provide 100% operation, 24 hours a day in any enviroment

DISCRIMINATORS


PRODUCTS

SERVICES






PRODUCTS

SERVICES




36

BREDO MATORS PTY LTDwww.bredomators.com.au

Shayne KellyManaging DirectorBredo Mators Pty Ltd30 Newlands Road, Reservoir VIC 3073Tel: +61 3 9460 3648Email: [email protected]

• CNC Swiss Turning Star SV-32• CNC Swiss Turning Star SR20R111• CNC Mill Turning Okuma• CNC Milling Integrated 4 Axis Okuma & Makino

• Low or High Production Runs• CMM Verification• Assembly• Material Analysis

CAPABILITIES

• Scientific• Defence• Tooling• Medical

KEY CUSTOMERS

• ISO 9001• AS/NZS401• ISO 14001


• Thyssen Alloys• Electromold• Bohler Uddeholm• Sandvik

KEY PARTNERS

• A Low Overhead Company offering very competitive services• Advanced CAD/CAM & CNC Machining Technology• An excellent reputation in the industry with a proven track

record as a reliable high quality supplier• 100% Australian Owned and run Engineering Business

• An extremely diverse business that looks to take a collaborative approach.

• Over 45 years of experience in the industry with a vast network of reliable suppliers.

• Full Material Traceability• Whole of life product support

DISCRIMINATORS

BRENCO AEROSPACEwww.brenco.com.au

David BrowneCEOBrenco Aerospace Pty Ltd171-173 Fairbairn Road, Sunshine West VIC 3020Tel: +61 3 9310 1977Email: [email protected]

• Complete range of Thermal Spray Coating Technologies including HVOF and Plasma Coatings

• Sermetal Sacrificial Coatings• Laser Deposition - 6Kw and 8Kw

• TIG and Plasma Transferred Arc welding systems• Metallurgical Coating analysis• Machining and Grinding

CAPABILITIES

• Northrop Grumman• Rolls Royce• Boeing• Hawker Pacific

KEY CUSTOMERS

• ISO 9001• CASA Part 145/ CASA CAR 30• Nadcap/PRI Coatings and Aerospace system• Rolls Royce #103360


• Oerlikon Metco• HC Starck

KEY PARTNERS

• Unique Nadcap/PRI qualified HVOF Coatings facility• Comprehensive Thermal Spray Coatings/Laser Deposition

business complimented by an extensive shop

• Combined Civil and Military sustainment services with over 50 years experience

DISCRIMINATORS


PRODUCTS

SERVICES







PRODUCTS

SERVICES



37

BUNJIL ENERGYwww.bunjilenergy.com.au

Tom SmallNational Sales ManagerBunjil Solar and Electrical Pty Ltd568 Glen Huntly Road, Caulfield South VIC 3162Tel: +61 1800 769 266Email: [email protected]

• Solar systems architecture and engineering• Solar Car Parks• Power Factor Correction• Thermal energy for refrigeration and HVAC

• EV Car Charging Stations• Electrical upgrades including HV• LED Lighting upgrades• Utility Scale Solar

CAPABILITIES

• Lendlease• John Holland• IGA Supermarkets• Mirvac

KEY CUSTOMERS

• ISO 9001 Quality Management• ISO 45001 Occupational Health & Safety• CEC accredited design & installer• Building Code 2016


• Prime Electrical & Data• Prana Energy• Shine On• Indigenous Defence & Infrastructure Consortium

KEY PARTNERS

• Full end-to-end engineering, procurement and construction team• 250 plus electricians, Master Electricians• Exclusive thermal energy product

• 10 years experience within renewables• Indigenous owned company, Supply Nation Certified

DISCRIMINATORS

DESIGNER | mark seggie CREATIVE DIRECTOR | alex dukcevic 26.07.13 4CP

Colours

CABLEX PTY LTDwww.cablex.com.au

Tim CadmanGroup Manager Business DevelopmentCablex Pty Ltd262 East Boundary Road, Bentleigh East VIC 3165Tel: +61 3 9575 3088Email: [email protected]

• Design assistance: parts selection, installation, design, re-design for production

• Manufacturing: custom cables & harness assemblies, 3D Modelling & 3D Design, Soldering to IPC-J-STD

• Auto test solution for Transport, Telecommunications, Aerospace and Defence

• Installation: C4I fit out onsite & offsite, cable routing, termination, upgrades and retrofits

• Project management, production & global supply chain management

• Complete end-to-end solutions: provide after market services• RF Cables / Semi Rigid / Microwave and special processes -

shielding, laser marking• EMC shielding & complex harnesses

CAPABILITIES

• Airbus Helicopters• Northrop Grumman• Thales• Airbus Military

KEY CUSTOMERS

• ISO 9001:2015• AS9100D - Aerospace Standard• Defence CAGE Code: Z5453• Airbus Helicopter Supplier of Year Award 2016


• Nexans• TE Connectivity• Glenair• ITT Cannon

KEY PARTNERS

• Develop-build electrical systems for harsh environments with electrical noise, EMC or electomagnetic attack

• Depth of experience in design for manufacture across platforms and domains

• Proven low-risk supplier & exporter - awarded Airbus Helicopters Best Industrial Supplier World Wide - 2016

• International quality accreditations & ITAR experience• Experienced in power, high power, RF & semi rigid cables up to

EHF, shielding and bonding for aircraft• Global exporter with established international supply chain

DISCRIMINATORS


PRODUCTS

SERVICES




PRODUCTS

SERVICES

Autonomous Systems



Integration



38

CGB PRECISION PRODUCTS PTY LTDwww.cgb.com.au

Michael LingardNational Business Development ManagerCGB Precision Products Pty LtdUnit 9 32 Silkwood Rise, Carrum Downs VIC 3201Tel: +61 3 9775 1125Email: [email protected]

• High Performance & Precision Components for manufacture maintenance & repair of land, sea, air & space vehicles

• Supplier of high performance & high precision mechanical & electrical components to Tier 1 Companies

• COTS & Customised Products• Aerospace seals & plastics• Air bearings, precision bearings, bushings/sleeve/journal.

Fiber Optic Connectors. Gearboxes & reducers

• Gears, precision & ground, load cells. Magnetic couplings, brakes & clutches. Rod Ends & Spherical Bearings

• Kamatics Specialty Bearings & Bushings. Bowman-High Performance Bowmet Bushes

• Direct OEM supplier support

CAPABILITIES

• Goodrich-JSF Weapons Bay/Undercarriage uplock• Rosebank-JSF Weapons Bay/Undercarriage uplock• Supacat-Oilite Bushes• Department of Defence- All Platforms

KEY CUSTOMERS

• ISO 9001:2015


• Kamatics• Barden• Kaydon• Greene Tweed

KEY PARTNERS

• Representative for many of the world`s leading manufacturers in our field

• Superior product quality, knowledge and service• Tailored solutions with direct OEM technical & engineering

support

• Develop working relationships with customers• Customers have access to the latest innovative designs

in our field• Many of our suppliers are Tier1 companies to Aerospace

& Defence Primes

DISCRIMINATORS

CODARRA ADVANCED SYSTEMSwww.codarra.com.au

Warren WilliamsManaging DirectorCodarra Advanced Systems Pty LtdLevel 4, 480 Collins Street, Melbourne VIC 3000Tel: +61 3 9614 7449Email: [email protected]

• Multi disciplinary System Engineering consulting covering mechanical, electronic, electrical and ICT systems

• Systems engineering/systems Integration and specification writing (including FPS, TCD, OCD, SEMP, V&V Plans)

• Specialist expertise in Defence Systems• Project & Program Management consulting and training

(Including PRINCE2®, MSP® & P30®)

• ICT Security expertise including IRAP and cryptographic equipment

• Test and evaluation management and consultation• Noise and vibration consultation (including Whole-Body

Vibration)• Electrical load analysis including Failure Mode, Elects and

Criticality Analysis (FMECA)

CAPABILITIES

• Dept of Defence (CASG)• Dept of Defence (DSTG)

KEY CUSTOMERS

• ISO 9001:2015 (SAI Global)• Accredited Training Organisation (APMG)


• 27 years experience working with Defence materiel acquisition• Multi disciplinary team of consultants• Established achievements in complex Defence systems

and platforms• All consultants have a security clearance of Secret (NV1)

as a minimum

• Expertise with IBM® Rational® DOORS®• Understanding of the through life benefits of a Capability

not just the technical solution• Project Management expertise to better integrate their

activities into a project• Wholly Australian owned private company

DISCRIMINATORS


PRODUCTS

SERVICES






PRODUCTS

SERVICES

Autonomous Systems


Integration




39

COMMUNICATIONS DESIGN AND MANAGEMENT PTY LTDwww.cdm.com.auJeff BogensbergerGeneral ManagerCommunications Design and Management Pty LtdLevel 1, 99 King St, Melbourne VIC 3000Tel: +61 3 9601 6611Email: [email protected]

• Delivering large multi-year ICT projects with accuracy• Delivery of comprehensive ILS services• In-house Research and Development team• National footprint• 24x7 Help Desk Support

• Custom military grade Internet of Things (IoT) device - NOMAD IoT

• Elite status with Tier 1 ICT hardware and software vendors• Technical writing and illustrations - operations, maintenance,

training, OH&S etc. publications and manuals

CAPABILITIES

• Thales• BAE Systems• Department of Defence• Leonardo

KEY CUSTOMERS

• ISO 9001:2015 – Quality Management System• ISO 27007 – Information Security Management Syst• ISO 4801 – Work Health and Safety• Juniper Partner of the Year 2017


• Juniper Networks• Microsoft• VMware• Fortinet

KEY PARTNERS

• Australian owned private organization capable of delivering highly complex, large Defence ICT projects

• Australia wide National and International Workforce• Highly skilled technical staff with years of experience and

qualifications across all ICT sectors• Dedicated Defence ILS team including specialist practitioners

and technical publication writers

• Proven track record of Defence project management• 80% of staff with Defence clearance levels• Design custom military grade “Internet of Things” (IoT)

products for fixed, mobile and remote applications• Strong relationships with Tier 1 and cutting edge technology

vendors

DISCRIMINATORS

COMPILATRIX RESEARCH CORPORATIONwww.compilatrix.com

Daniel StojanovDirectorCompilatrix Research Corporation Pty LtdPO Box 347, Greensborough VIC 3088Tel: +61 (0) 413 063 341Email: [email protected]

• Design for additive manufacturing• Structural analysis• Linear and non-linear finite element analysis• Material testing/characterisation

• Scientific computing• Processing and visualisation of large data sets• Machine learning

CAPABILITIES

• Experience working with organisations to quickly adapt new technologies. Lower cost and time to ROI.

• Boutique firm. Nimble team capable of moving quickly to adapt new technologies.

• Experience working with both academia and industry.• Excellent communicators of complex ideas as simple,

actionable information for decision makers.

DISCRIMINATORS


PRODUCTS

SERVICES

Autonomous Systems



Information Systems

Integration



PRODUCTS

SERVICES



Information Systems



40

CORNELL DESIGN VICTORIAwww.cornelldesign.com.au

Jonathan BannisterManaging Director - VictoriaCornell Design Victoria Pty LtdA4 8 Rogers St, Port Melbourne VIC 3207Tel: +61 3 9036 3662Email: [email protected]

• Provide a low risk scalability option for Design and Engineering teams

• 18 Mechanical and Electrical Designers between SA and Victoria

• Rapidly INTEGRATE into our client’s teams

• Work on (or off) our client’s site• Able to supply key CAD software (Solidworks, Inventor,

AutoCAD, AutoCAD LT)• Have up-to-date hardware for efficient operation

CAPABILITIES

• SAAB Australia• Thales Australia• Raytheon• Silvertone Electronics

KEY CUSTOMERS

• Internally managed and audited QMS


• Cornell Design South Australia

KEY PARTNERS

• All our staff have a Trade Background - if we design it, you can build it

• All our staff are full time employees (no contractors) ensuring we are always available and will complete the job

• Fully insured with Public Liability and Professional Indemnity Insurance

• Fully licensed software• There when you need us....

DISCRIMINATORS

D-TWINwww.dtwin.com.au

Barry TregidgoDirector, Sales and MarketingDTWIN Pty Ltd50 Langridge Street, Fairfield VIC 3078Tel: +61 1300 831 334Email: [email protected]

• Product Lifecycle Management (PLM) in the Defence environment

• Leveraging PLM to support the Digital Twin• Configuration Management software implementation &

services

• Implementation and support of leading PLM solutions• Enterprise Integration of Engineering Systems• Product Data Management Services

CAPABILITIES

• Leidos• CSIRO• Wier• Penten

KEY CUSTOMERS

• Siemens• Aras Corporation

KEY PARTNERS

• Deep and proven expertise in Australian Defence platform configuration management systems

• Security cleared personnel

• Cross industry PLM experience• Specialist knowledge in Supplier - Defence data exchange and

integration

DISCRIMINATORS


PRODUCTS

SERVICES





PRODUCTS

SERVICES


Information Systems

Integration


41

DARONMONT TECHNOLOGIESwww.daronmont.com.au

Lee StanleyBusiness Development ManagerDaronmont Technologies Pty Ltd15 Huntingdale Road, Mount Waverley VIC 3149Tel: +61 3 9830 6222Email: [email protected]

• Broad Systems Integration Capability - Hardware, Software, Mechanical, Security and Mobility

• Communications ESM and Direction Finding Systems• Passive and High Frequency Radar Systems design and

Engineering• Air Traffic Control and Ranges - Mobility and C2 Systems

• Link 11 and 16 Training Systems• Engineering Support to the Intelligence Community• 24/7 Support for Remote Communications and Surveillance

Systems HF Surface Wave Radar• Tactical Air Defence C2 Systems

CAPABILITIES

• Air Force - Deployable Air Defence C2• Air Force - Woomera Mobile Range Control C2• DIH - Soldier Passive Radar Systems• CASG (ESD), DST Group, ADFTA, ABF

KEY CUSTOMERS

• ISO 9001:2015• CASG AEO Certification for Acq and Support• Essington Lewis Trophy Winner - 2008 and 2012• Defence Teaming Centre Outstanding SME Award 2012


• BAE Systems, Raytheon Australia, Indra, SAAB• Zenith, Sage, APC, Extensive local Supply Chain• RSB Op K9 Assistance Dogs Programme• C4i Harris

KEY PARTNERS

• Multiple platform/Domain experience (installation, integration, set to work, support)

• Proven R&D/Developmental Engineering Capability• Successful track record with CASG(ESD)/ RAAF/ Navy/ Army -

Multiple award winner• ISO 9001 accredited Business System (Quality System)

• AEO accreditation - S&CSPO (MCRC Project) - Acquisition and Support

• ASDEFCON Acquisition and Support Capability Maturity• Party to multiple TAAs and ITAR ready• Proven capability to provide long term in-service support

DISCRIMINATORS

DEAKIN UNIVERSITYwww.deakin.edu.au/research/institutes-and-centres

Professor Saeid NahavandiPro Vice-Chancellor (Defence Technologies)Deakin University75 Pigdons Road, Waurn Ponds VIC 3216Tel: +61 3 5227 1231Email: [email protected]

• Universal Motion Simulators, High-G centrifuge simulation, flight simulators, land vehicle simulators

• Materials, carbon fibre research and manufacturing, high strength & lightweight

• Battery technologies, advanced battery prototyping, corrosion and protection technologies

• Modelling and simulation, system-of-systems modeling, logistics systems, human performance

• Robotics and mechatronics, mobile robotics, autonomous vehicles, energy demand prediction

• Virtual reality and augmented reality, mixed reality, haptics• Tele-operation, tele-manipulation, tele-robotics• Defence mental and physical health, cognitive load monitoring,

psychology, psychiatry, exercise

CAPABILITIES

• Australian Defence Force, DSTG• Boeing Australia, General Dynamics• General Motors, Ford• ANSTO

KEY CUSTOMERS

• 2016 Mobility Engineering Excellence Gold Award


• General Motors• Ford• General Dynamics• Boeing Australia

KEY PARTNERS

• Materials research, carbon fibre research• Battery technology research and development• Robotics and haptics research, prototyping• Modelling and simulation of complex and uncertain systems

• Motion simulator and simulation technologies• Data analytics and decision support• Human movement and sports science, Medical physiology,

Neuroscience, and Exercise and nutrition

DISCRIMINATORS


PRODUCTS

SERVICES


Integration


PRODUCTS

SERVICES


Autonomous Systems


Information Systems

Integration





42

DEFENCE SCIENCE INSTITUTEwww.defencescienceinstitute.com

Craig ButlerEngagement ManagerDefence Science InstituteLevel 4, 204 Lygon Street, Carlton VIC 3053Tel: +61 3 9035 3961Email: [email protected]

• Creating research networks for industry, the Defence Science and Technology Group and Victorian Universities

• Aligning research capabilities with the needs of Australia Defence

• Supporting defence industries in providing a one-stop shop to access Victorian universities’ capabilities

• Provide our stakeholders with advice on the Defence and National Security R&D environment

• Identify and place higher degree interns into industry

CAPABILITIES

• Australian Department of Defence• Victorian State Government• Over 200 local SMEs and International Primes

KEY CUSTOMERS

• Victorian Universities• Defence Science and Technology Group (DST)• Defence Materials Technology Centre

KEY PARTNERS

• Access to world class academic institutions and researchers• Embedded researchers from DST Group and Victorian

Universities

• Strong relationship with US Defense Funding Agencies• Seed funding for appropriate research initiatives• No Interest in IP or Royalties

DISCRIMINATORS

DEK TECHNOLOGIESwww.dektech.com.au

Drini MullaCEODEK Corporation Pty LtdCnr Riggall St Maldon St,, Broadmeadows VIC 3047Tel: +61 3 9309 1808Email: [email protected]

• Software engineering: Development and support for mission-critical software systems including embedded

• Electronics engineering: Design, integration & test of advanced electronic systems, including ASIC, FPGA and PCB

• Systems engineering, integration and test• Test program development and execution

• Project and technical management• Onsite and offsite assignments, or end-to-end

project responsibility• Maintenance• 24/7/365 global support centres

CAPABILITIES

• Ericsson AB - Stockholm, Sweden• Boeing Defence Australia• New South Wales State Government• Edgeware

KEY CUSTOMERS

• ISO 9001:2015


• Altera Corporation - Development Partner• Mirantis OpenStack

KEY PARTNERS

• Australian company with R&D offices in Australia, Europe and Asia

• Global engineering offices enable DEK to be cost effective and close to customers and suppliers with 24/7 support

• Leading specialist in communications R&D• DEK provides a sustained commercial edge to world-leading

technology companies• DEK Foundation – Helping Communities

DISCRIMINATORS


PRODUCTS

SERVICES




PRODUCTS

SERVICES




Information Systems

Integration



43

DIRECT EDGE MANUFACTURINGwww.directedge.com.au

Diane EdgertonCEODirect Edge (Tas) Pty Ltd53 Strahan Street, South Burnie TAS 7320Tel: +61 3 6434 0500Email: [email protected]

• Prototype & product development• Laser, punch & router cut parts (Mild steel, stainless steel,

aluminium, titanium, copper, timbers & plastics• Brake press folding• Welding of mild steel, stainless steel, aluminium, copper

& dissimilar metals.

• Manual jobbing tasks that include but are not limited to drill & tap, bevelling & de-burring

• Sandblasting & chemical dipping• Powder coating, painting, galvanised plating, electro polishing

& anti corrosive treatment• Certificate of compliance from Romer & Inspecvision quality

systems

CAPABILITIES

• CAT• Taylor Bros• Mader International• Incat Tasmania

KEY CUSTOMERS

• ISO 9001:2015• ISO 14001:2015• AS/NZS 4801:2001• BS OHSAS 18001:2007


• Bluescope Steel Australia• Maltec Engineering• Capral Aluminium• Headland Machinery

KEY PARTNERS

• Australian owned & operated, Direct Edge Manufacturing distribute high quality Australian made products worldwide

• Full range of services provided from receipt to despatch of order• Deliver an extensive range of solutions to all industry sectors

& Offer low to high volume production• Latest CNC automated technology ensures reduced lead times

& guaranteed precision

• Diverse range of finishes include painting, powder coating, galvanised plating, engraving or electro polishing

• Quality certificate of compliance provided with Romer & Inspecvision quality systems

• Dedicated R&D & continuous improvement teams• International Welding Specialists onsite & ISO 3834-2

DISCRIMINATORS

DMTCwww.dmtc.com.au

Miles KenyonProgram Development ManagerDefence Materials Technology Centre LimitedLevel 2, 24 Wakefield Street, Hawthorn VIC 3122Tel: +61 3 9214 4447Email: [email protected]

• Foster enduring collaborative relationships between industry, research organisations, industry bodies and Defence

• Support Australian defence industry to be Defence-ready and reach global competitiveness benchmarks

• Reduced time to market and reduced investment required from Defence through our collaborative, co-investment model

• Ensuring Australian research expertise is targeted to industrially-relevant outcomes

CAPABILITIES

• Australian Department of Defence• State Governments’ defence innovation programs• BAE Systems Australia• RUAG Australia

KEY CUSTOMERS

• ISO 9001:2015 accredited quality system• Safeguarding Australia Eureka Prize• Award-winning program dev’t & delivery model• Defence Industry Security Program


• Defence Innovation Hub, DST Group, Force Design• Australian Universities, CSIRO & ANSTO• Australian industry supply chain partners• Capability Acquisition and Sustainment Group

KEY PARTNERS

• Integrated supply chain approach to technology development ensures rapid adoption and tech transfer

• Involvement of Defence customer in all projects ensures relevance of project outcomes

• Industry-led approach to projects ensures collaborators are outcome-focused

• Active in all states across Australia, enhancing sovereign Defence capability through collaboration

• Award-winning program management and project oversight models, including management of Intellectual Property

• Breadth and depth of materials and manufacturing technology capability

DISCRIMINATORS


PRODUCTS

SERVICES





PRODUCTS

SERVICES


Autonomous Systems





44

DRAEGER AUSTRALIA PTY. LTD.www.draeger.com

Daniel McGregorSegment ManagerDraeger Australia Pty. Ltd.8 Acacia Place, Notting Hill VIC 3168Tel: +61 1800 372 437Email: [email protected]

• Engineered Systems (Breathing Gas, Compressors & Collective Protection)

• Portable & Fixed Gas/Flame Detection Solutions (TIC & CBRNE)• Breathing Apparatus & Emergency Escape Devices

(OCCABA & ELSRD)• Respiratory & Personal Protective Ensembles

(TIC, CBRN & Fire)

• Open / Closed-Circuit Diving Systems & Equipment (SCUBA & CCUBA)

• Medical - Patient Monitoring, Ventilation, Anaesthesia & Work Place Infrastructure

• Thermal Imaging Cameras & Breath Alcohol / Drug Testing Solutions

• Australian / International Through Life Sustainment & Support

CAPABILITIES

• CSAG & Associated Domains• NZ Ministry Of Defence• Key Oil, Gas & Mining Company’s• Every State Fire Service (Australia)

KEY CUSTOMERS

• ISO 9001:2015• ISO 13485:2012• NATA Accredited Laboratory• ISO 14001 & 18001


• Drägerwerk AG & Co. KGaA (Parent)• Australian Industry & Defence Network

KEY PARTNERS

• Original Equipment Manufacturer (OEM)• Over 125 Years Of Continues Research & Development• Significant Australian Sustainment & Support Capability• Physical Footprint In Every State In Australia• In House Design, Testing & Development Capability’s

• National Australian / International OEM Service Network• Australian Logistics & Warehousing (Melbourne/Perth)• Full Owned Subsidiary Of Drägerwerk AG & Co. KGaA

(Germany)

DISCRIMINATORS

ENVIROFLUIDwww.envirofluid.com

Lorraine JohnsonNational Account Manager DefenceEnvironmental Fluid Systems39 Coghlans Road, Warrnambool VIC 3280Tel: +61 3 5564 6455Email: [email protected]

• Manufacture of MILPRF Safety Solvents• Powerful Green degreasers and specialty chemicals• Supplier of non-chlorinated Brake Cleaners.• Boeing, Airbus and Douglas Accredited Aircraft Wash

• Environmentally safe limescale and calcium removers• Parts Washers and recyclable solvent• Quick break detergents that protect surfaces.• AMSA Listed Oil Spill chemicals

CAPABILITIES

• Defence• ASC• Penske• Glencore

KEY CUSTOMERS

• ISO 9001, ISO 14001• Defence Letter of Recognised Supply• GECA (Good Environmental Choice)• HACCP (registered food establishments)


• NATO (NSN) codified safety solvents, degreasers and specialty chemicals that enhance wash-down systems

• High flash point brake cleaners that reduce health and safety risks

• Rechargable solvent dispensers that replace aerosols

• ‘Green’ bio-based degreasers and Aircraft Wash that reduce waste disposal costs

• Super concentrated solutions that save storage space• Quick break detergents safe for grey and black water systems

DISCRIMINATORS


PRODUCTS

SERVICES

Integration




PRODUCTS

SERVICES



45

GEELONG DEFENCE ALLIANCEwww.geelongdefencealliance.com.au

Leonie SextonSenior Administration OfficerGeelong Defence Alliance100 Brougham Street, Geelong VIC 3220Tel: +61 3 5272 5043Email: [email protected]

• Geelong is Victoria’s second largest city located one hour from Melbourne

• Strong advanced manufacturing and engineering expertise• Cutting edge research from Deakin University

• Ideal investment location for defence• Logistics and infrastructure with freight, rail, Avalon Airport

and Geelong Port

CAPABILITIES

• Manufacturing and engineering• Research and development• Support services and ICT

KEY CUSTOMERS

• Deakin University• State Government• Commitee for Geelong• Local industry including Chemring, Winchester

KEY PARTNERS

• Leading defence industry community• A capable strong business environment with positive attitude

to growth• Established networks offering fast tracked introductions

to defence supply chain opportunities• Designated central point of contact for information and

knowledge about Geelong capability

• Proven track record in advanced manufacturing, engineering, research and development

• International maritime port and air access• Heavy rail connections to Melbourne and freight rail network• Big city service without big city overheads

DISCRIMINATORS

GEOPLEXwww.geoplex.com.au

Matthew LangleyOperations ManagerGeoplex Pty LtdLevel 2, 27 Hardware Lane, Melbourne VIC 3000Tel: +61 (0) 419 218 814Email: [email protected]

• Enterprise geospatial consulting services• Design, development and support of mapping applications

on web, mobile and desktop platforms• Deployment of geospatial applications to cloud platforms,

including Amazon Web Services and Microsoft Azure• Geospatial visualisation, analysis, data management and

reporting

• Business analysis and enterprise system architecture• Integration and development of emergency incident

management and situational awareness capabilities• Raster imagery management and publication• Geospatial data capture using small satellites

CAPABILITIES

• Dept of Immigration and Border Protection• Defence - DSTG, Navy, AGO, ASD, HQJOC, RPDE• Vic Land, Water, Environment and Planning• Australian Maritime Safety Authority

KEY CUSTOMERS

• Amazon AWS accredited consultants• Certified agile practitioners• Data Vic - Innovative solutions winner 2014


• ESRI, Pixia, memsql, Carto• AGI Systems Tool Kit (STK)• Nova Systems, GVH Aerospace, Auspace• Planet Satellite Imagery, Spire Satellite AIS

KEY PARTNERS

• Innovative approach in applying best practice ICT principles and tools to problems in the geospatial domain

• Strong advocates of agile development practices to deliver working software

• Highly experienced team in the geospatial domain• Parent company (Nova Systems) are an Australian professional

services firm with extensive defence background

• Proven track record building and supporting enterprise geospatial systems in the defence and security sector

• Able to support full ICT project life cycle, through inception, requirements, build, integration and deployment

• Partners with world leading geospatial technology and data providers

DISCRIMINATORS


PRODUCTS

SERVICES

Professional Services AEROSPACE CAPABILITY AREAS

PRODUCTS

SERVICES




Information Systems

Integration




46

GPSAT SYSTEMS AUSTRALIA PTY LTDwww.gpsatsys.com.au

Graeme HooperManaging DirectorGPSat Systems Australia Pty Ltd1/22 Aberdeen Road, Macleod VIC 3085Tel: +61 3 9455 0041Email: [email protected]

• Specialist Satellite Navigation (GPS / GNSS) Systems Engineering company. Australian owned and based in Melbourne

• GRIFFIN - leading technology in detection & geo-localisation of any jamming & spoofing interference of GPS signals

• GBAS Multi-Mode Receiver (GMMR) real-time static or dynamic monitoring of GBAS performance (accuracy/integrity)

• Multi Element Electronically Steerable Phased Antenna Array optimised to detect very weak signals

• Threats processed, CW, WBN, NBN, SweptCW, PulsedCW, Chirp Tones and/or any combination, 30MHz bandwidth

• ANZ distributor for Spirent GPS/GNSS and IMU laboratory RF simulation equipment for military platform testing

• ANZ distributor for NovAtel precision GPS navigation SAASM and Anti-Jam (GAJT) Antennas for military platforms

• Test Measurement & Analysis Services, experience and elite resources to add significant value to any ITS project

CAPABILITIES

• DST GROUP; CASG, RAN, RAAF & ARMY• CSIRO; UNSW; UniAdelaide; QUT; ACFR• DFAT; Airservices; Geoscience Aust; AIS• BAE; Thales; Boeing Insitu; Textron

KEY CUSTOMERS

• ARC Industry Linkage Projects 2009 & 2014• DST Group Capability Tech Demo Project 2014• Australian Coal Research Project 2015


• NovAtel Inc. Canada• Spirent Communications UK• DST GROUP; Australian Research Council (ARC)• UniNSW; UniAdel; QUT; GD-Nz

KEY PARTNERS

• GPSat Systems delivering complex navigations systems to Australian Defence and Aerospace Industry since 1993

• Professional team of Electrical, Electronic, Geomatic, Engineers, plus Computer and Spatial Scientists

• Leading technology for locating RFI and spoofing affecting mission critical GPS-dependant systems

• Extensive GPS/GNSS laboratory test & simulation capability including laboratory equipment and technical expertise

• Experts in Precision Vehicle 3D body Motion & Orientation (6 degrees of freedom) navigation & spatial interaction

• Experts in software development for C++ embedded systems, FPGA VHDL programming and electronic PCB design

• Expert support for NovAtel precision GPS/GNS navigation SAASM and Anti-Jam (GAJT) Antennas for military platforms

• Expert support for Spirent GPS and IMU laboratory RF simulation equipment for military platform testing

DISCRIMINATORS

GREYSCANwww.greyscandetection.com

Matt PorterGlobal Head of Sales and DistributionGreyScan Australia Pty Ltd9/435 Williamstown Road, Port Melbourne VIC 3207Tel: +61 3 8459 6999Email: [email protected]

• World first fully automated, compact, and portable technology to bridge critical gap with current technologies

• Patented and proven technology for detection of homemade inorganic explosives with high degree of sensitivity

• High-resolution detection capabilities in a field robust, compact and portable unit

• Able to detect nitrate, chlorate and perchlorate as low as 50-100 ng

• 40 second test sequence interval, compatible with market requirements

• Complements commercially available Ion Mobility Spectrometry (IMS) explosive trace detectors

• Simple to operate and uses standard commercially available swabs & wands

CAPABILITIES

• Military, Embassies, Border Control, Events• Police, Bomb Squad, Army, Government Agencies• Mobile and Stationary Forensic Lab Applications• Cargo & Mail Screening e.g. Aviation, Rail, Bus

KEY CUSTOMERS

• 2018 Victorian Premier’s Design Award Finalist• 2018 Land Forces Innovation Award Shortlist


• Federal Resources• Grey Innovation Pty Ltd• AETOS Holdings Pte Ltd• Tactical Products Pty Ltd

KEY PARTNERS

• Sets global standard for inorganic explosive trace detection and fills a critical gap in the market

• Extends the current security capabilities - enabling nitrate, chlorate and perchlorate detection in a single test

• Detection of inorganic explosives are not currently available with other ETD technologies

• Provides detailed on screen and PDF detection report (Electropherogram) and detection levels

• Mobile and Stationary Forensic Lab application e.g. Police, Bomb Squad and Army

• Entry point screening pass/fail application e.g. Military, Embassies, Border Control, Government Agencies, Events

DISCRIMINATORS


PRODUCTS

SERVICES


Autonomous Systems





PRODUCTS

SERVICES




47

H & H MACHINE TOOLSwww.h-h.com.au

Bernard ReganSalesH & H Machine Tools Australia Pty Ltd45 Fordson Road, Campbellfield VIC 3061Tel: + 61 3 9357 2368Email: [email protected]

• 5-axis Gantry Milling Machines• Design and manufacturing of five axes machine tools for

milling, mill-turn (multiplex-machines), trimming and drilling

• Design in house with advanced Computer Aided Design/ Machining (CAD/CAM) & Engineering Analysis (FEA)

• Complete turnkey project delivery for Trim and Drill systems• Custom design based on customer requirement

CAPABILITIES

• Boeing• Marand• Hofmann• DVR

KEY CUSTOMERS

• Vic. 2016 Manufacturer of the Year Award• Boeing approved supplier


• Siemens

KEY PARTNERS

• Many years expertise in providing five axes gantry Precision Milling Machines (PMM) to aerospace customers

• High level of vertical integration, i.e. in-house manufacturing of milling heads and spindles

• All PMM have no mechanical transmission but use linear motors instead

• Five axes PMM with very high volumetric accuracy• Solutions to customer requirements• PMM certified to inspect components by leading aircraft

manufacturer

DISCRIMINATORS

HARDCATwww.hardcat.com

Dan DrumManaging DirectorHardcat Pty Ltd253 Park Street, South Melbourne, Melbourne VIC 3205Tel: +61 3 9695 5400Email: [email protected]

• Project Based Asset Tracking Software• Using Barcoding as well as RFID (Radio Frequency

Identification)• Simplicity of Use

• Speed of Deployment• Complete Full life-cycle Solution• Enterprise Asset Tracking Solutions

CAPABILITIES

• British Ministry of Defence• Australian Defence• BAE Systems• Airbus

KEY CUSTOMERS

• ISO 9001


• Microsoft• Oracle

KEY PARTNERS

• 2000 clients in 120 countries around the world• A new client purchases Hardcat Asset Tracking every two days• Proven in theatres of war since Bosnia and Kosovo and have

met every challenge• BAE use Hardcat to control construction of Queen Elizabeth

Class Carriers• Victorian Police use Hardcat & RFID for fast deployment to

weapons to and from armory

• British Army Infantry Training Centre use Hardcat for simple and efficient issue and return of equipment

• HQ LAND - TIGER team tracks vehicles in and out of operational theatres

• Customise your configurations to suit requirements of individual units

DISCRIMINATORS


PRODUCTS

SERVICES

Manufacturing / Fabrication / Assembly AEROSPACE CAPABILITY AREAS

PRODUCTS

SERVICES

Information Systems


48

HARDCHROME ENGINEERING PTY LTDwww.hardchrome.com.au

Mehdi SoodiLaser Department ManagerHardchrome Engineering Pty Ltd175 Wellington Road, Clayton VIC 3168Tel: +61 3 9561 9555Email: [email protected]

• Metal components fabrication and assembly• Metal components reclaimation• Surface engineering, coating, protection• R&D

CAPABILITIES

• Vector Aerospace• Kumatso• Liehbher• AGL

KEY CUSTOMERS

• ISO 9001:2015• CASA Part 145


• Full in-house service, no subcontractors therefore full control over quality

• 40 years of experience• Small enough to make quick decisions and implement them,

large enough to handle large projects

DISCRIMINATORS

HARDMAN BROS. PTY LTDwww.hardmanbros.com.au

Mark HardmanCEOHardman Bros. Pty Ltd385-393 Lower Dandenong Road, Dingley Village VIC 3172Tel: +61 3 9552 6500Email: [email protected]

• CNC Machining and General Engineering Service• Turning and milling machines, wire cutting, broaching,

slotting, wire cutiting• Hadbro transmission range of agricultural gearboxes,

right angle drive for most application• Full range of fine pitch precision gears & associated

instrument components

• Timing belt pulleys and other miniature power transmission part• Universal hobbing, gear shaping worm milling, bevel gear

cutting, mitre gear cutting, thread cutting, rack cutting• CNC - lathes, mills, machine centres, cylindrical grinding EDM• Quality Control - Vision inspection, CMM, optical comparation,

surface tester, hardness testing & master gear test

CAPABILITIES

• Marand P/L Tier 1 suppler to Lockheed Martin• Trakka P/L Tier 1 suppler to Aviation industry• BAE Systems Australia Defence

KEY CUSTOMERS

• ISO 9001 continuously certified since April 1995


• R&I Instrument & Gear Co. (Aust) Pty Ltd• Mark’s 4WD Adaptors Pty Ltd

KEY PARTNERS

• Successful pass auditing by defence company such as BAE Systems

• Successful pass auditing to AS9101 by Airbus Helicopters, Augusta Westland & Bell Helicopters

• Successful pass auditing by scientific company such as Agilent Technologies

• Successful pass auditing by medical companies such as Ellex Medical & Boisystem

• Successful pass auditing by Train Manufacture - Bombardier• Satisfy requirements that meet regulations for CAA (Australia),

EASA (Europe) & FAA (USA) for Aviation• Satisfy agencies controlling medical & scientific equipment

such as FDA (USA) TGA (Australia) & EMEA (Europe)

DISCRIMINATORSAEROSPACE CAPABILITY AREAS

PRODUCTS

SERVICES




PRODUCTS

SERVICES




49

HARGO ENGINEERING PTY LTDwww.hargo.com.au

Frank GogolManaging DirectorHargo Engineering Pty Ltd103-115 Merrindale Drive, Croydon South VIC 3136Tel: +61 3 9761 5110Email: [email protected]

• Advanced manufacturing of Aerospace spec on-board electrical connectors

• Interconnecting Rack and Panel Housings• Black-box Fittings• Aircraft circuitry enclosures

• Avionics systems components• Precision and Repetition Engineering• Engineering Development and manufacturing• First Article Inspection Reports to AS9102, PPAP’s, FMEA,

PCP in process inspection

CAPABILITIES

• Aerospace - Local - JSF & Export• Defence - Local - ARMTSPO & Export, • Life Sciences• Mining

KEY CUSTOMERS

• AS 9100D• ISO 9001:2008• I.T.A.R. Compliant


• Thyssen Krupp• Collins Anodic• Valbruna Australia• Danco Anodizing

KEY PARTNERS

• Over 40 years of experience in the Advanced Manufacturing field

• 100% reliability for fail-safe components which underpin mission-critical activities

• 100% Australian owned family company with local manufacturing facility

• Lean manufacturing processes• In-house technical development program to ensure continual

up-skilling of staff• ‘Outside-in’ collaborative approach to project management

DISCRIMINATORS

HEUCH REFRIGERATIONwww.heuch.com.au

Steve OakleyManaging DirectorHeuch Pty Ltd35-37 Nissan Drive, Dandenong South VIC 3175Tel: +61 3 9793 6088Email: [email protected]

• Complete through-life manufacturer and service provider, design to decommission, for C.O.T.S and specialised refrigeration systems

• Full field servicing with in-house, real time engineering support• Haz-Op and Military Spec. design and manufacture• Personnel, equipment and electronics cooling and heating

• Environment simulation test and training rooms• Redeployable solar or diesel powered HVAC and refrigeration

equipment• Air conditioning, liquid, material and process cooling• Refrigerant conversions

CAPABILITIES

• Department of Defence – DSTO Environmental Simulator & Equipment Test Chamber (Fishermens Bend, Vic)

• RAAF – Radar Oil Cooling, JORN Over Horizon Radar project (Aust wide), Air Transport -18 °C Refrigerated Tricons (Amberley, Qld).

• Boeing/Hawker de Havilland – Ultra low temp cool rooms for advanced materials manufacture, Degreaser tanks, Rocket fuel test and storage rooms (Melbourne, Vic)

• Exxon-Mobil – Haz Area Offshore Refrigeration Systems (Bass Strait), Industrial Control Room HVAC for Gas Plant (Longford, Vic).

KEY CUSTOMERS

• ISO 9001:2008 QMS accreditation by SAI Global (QEC6873)• Winner 2016 CCN HVAC-R Leadership Awards for Innovation• Finalist 2016 Land Forces Innovation Awards• Finalist 2014 Melbourne S.E Business Awards


• Proven: providing HVAC and Refrigeration solutions and service to Defence industry for over 30 years

• Complete service provider: Design, manufacture, install and service• Local: Australian engineering. Fast prototyping to volume

manufacture• Stress Tested: Successful projects in harshest environments,

including high ambient temperatures and off-shore locations, to tight operating and energy budgets

• Reliable: Lean manufacture process, mature QMS and continuous improvement philosophy

• Can do: “Can do” and “See it through” attitude

DISCRIMINATORS


PRODUCTS

SERVICES

Autonomous Systems





PRODUCTS

SERVICES




50

HOFMANN ENGINEERINGwww.hofmannengineering.com

Jarod CowanProduct Manager - AerospaceHofmann Engineering Pty. Ltd.292 Bay Road, Cheltenham VIC 3192Tel: +61 3 8585 1882Email: [email protected]

• Aerospace Tooling - Jigs & Fixtures• Gear Manufacturing• Precision & Heavy Machining• Heat Treatment

• Fabrication & Welding• Catia 5, NX & Solidworks - CAD/CAM Systems• Specialist Tools & Equipment• Metrology, CMM’s & Laser Trackers

CAPABILITIES

• Boeing Aerostructures & Defence• BAE Systems• Airbus• Babcock Pty. Ltd.

KEY CUSTOMERS

• AS/NZS ISO 9001:2008• AS 9100 Rev C:2009 - Cheltenham Site (ITAR)• Member of AGMA• 2011 CY O’Connor award, Engineering Excellence


• Significant R & D Capabilities• 20+ years experience in Design, Development & Manufacture

of military and aerospace components, Jigs, Fixtures etc.• One Stop Shop from Design to Manufacture• Largest Heat Treatment Capability in Australia• On-site services worldwide - initial consultation & inspection

through to refurbishment or repair & installation

• 100% Australian owned family company• Global Premises/Representatives - Australia, USA, Canada,

Chile, Peru, India & China• Common ERP Systems used across all sites

DISCRIMINATORS

HTA AEROSPACE & DEFENSEhta-global.com

Ian BowdenHTA Aerospace & Defense Pty Ltd40B Capital Link Drive, Campbellfield VIC 3061Tel: +61 3 8359 7500Email: [email protected]

• Heat Treat special processing of stainless PH steels to H conditions IAW customer and industry specifications

• Heat Treat special processing of Aluminum Alloys to T conditions IAW customer and industry specifications

• Verification of heat treatment processes by Rockwell Hardness Testing and Electrical Conductivity Testing

CAPABILITIES

• Airbus Group Asia Pacific• Amaero Additive Manufacturing• Lovitt Technologies• Marand

KEY CUSTOMERS

• AS 9100 Certified• Nadcap Accredited Heat Treating• Boeing• Lockheed Martin


• ITAR compliant site• Many process’ are approved by Primes such as Lockheed

Martin and Boeing• 3rd party process accreditation by Nadcap for Heat Treating.

• Online job tracking capability• Many years of experience working in the Aerospace and

Defence sectors working on programs such as JSF F35.• Heat Track – HTA Trademarked Customer Information Portal

DISCRIMINATORS


PRODUCTS

SERVICES






PRODUCTS

SERVICES



51

HYDACwww.hydac.com.au

Peter AgiusNational Sales and Marketing ManagerHYDAC Pty Ltd109-111 Dohertys Rd, Altona North VIC 3025Tel: +61 3 9272 8907Email: [email protected]

• Local design and manufacturing facility• Current supplier of the Army, Navy, and Airforce

(ground equipment)• Current supplier of Defence ships worldwide through KRAEFT

and military test rigs though HYCOM

• Products with MIL-SPEC suitable for ground and onshore and offshore equipment

• Products & services under quality systems certified in accordance with ISO 9001:2008

CAPABILITIES

• Collins Class Submarines (UK Defence contractor• HMAS ADELAIDE (Australian Defence contractor)• BARRACUDA SUBMARINE (French Defence contractor)

KEY CUSTOMERS

• ISO 9001• ISO 18001• ISO 29001• ISO 14001


• HYCOM

KEY PARTNERS

• Worldwide approvals• Engineering advice• Bespoke design & drawings• On-site reliability audit program• Cleanliness solutions for oil & fuel

• Oil analysis & calibration service in our own Laboratory & Calibration Centre of Excellence

• Quick product availability with branches located close to you• Hands-on technical training

DISCRIMINATORS

INDEC CONSULTING PTY LTDwww.indec.com.au

Christopher RulePrincipalIndec Consulting Pty LtdLevel 7,60 Collins Street, Melbourne VIC 3000Tel: +61 3 9250 6950Email: [email protected]

• Portfolio, Program and Project Management• Systems Engineering and Integration• Capital System Capability Development, Acquisition

and Sustainment• Infrastructure Program Management and Contract

Administration

• System Safety and Engineering Advisory• Asset Management, Integrated Logistic Support• Business Operations Modelling, Simulation and Assessment• Contestability and Independent Technical, Project and

Commercial Assurance Services

CAPABILITIES

• Defence CASG• Transport for Victoria, DEDJTR• Transport for NSW• Victorian School Building Authority

KEY CUSTOMERS

• ISO 9001:2015• ISO/IEC 27001:2006• PAS55:2008 Endorsed Assessor• ISO 55000


• Over 35 years’ experience in Defence, Utilities, Transport and Built Environment sectors.

• Independence and expertise – technologies, program management, asset management and commercial.

• Transparency and reliability• Risk and System Safety methodologies successfully implemented

across the Defence, Financial and Transport Sectors

• IS055000 Certified Assessor | Institute of Asset Management Endorsed

• Security cleared consultants

DISCRIMINATORS


PRODUCTS

SERVICES


Integration





PRODUCTS

SERVICES


Integration



52

INTEGRA SYSTEMSwww.integrasystems.com.au

Paul HughesManaging DirectorIntegra Systems Pty Ltd197 Northcorp Boulevard, Broadmeadows VIC 3047Tel: +61 3 9359 3133Email: [email protected]

• Product Design Engineering, including Industrial Design and Mechanical Engineering - Concept to Prototyping

• Design for Manufacture (DFM), design for easy deployment, design for sustainability, design for reduced on-costs

• Prototyping - Rapid prototyping, 3D printing, applied manufacturing prototyping

• Project Management of key network of local and global suppliers for complete solutions

• Flexible light metal in-house manufacturing facility• Punching processes, including Integra’s in-house designed

and built ‘Punch-IT Coil Line’• Laser cutting, servo electric bending, notching, fastening,

welding powdercoating and assembly• Integra will make your vision real

CAPABILITIES

• Defence and emergency response vehicles• Public transport infrastructure• IT and Electrical enclosures an infrastructure• Merchandising and customer information systems

KEY CUSTOMERS

• ISO 9001:2015 certified• VIC Manufacturing Hall of Fame Business of the Year 2013• Lifetime Achievement Awards - 2011 - 2014• NBAA Enterprise & Innovation Award 2012


• Ironside Defence and Mining• Design Synergy• Synergy

KEY PARTNERS

• Strong and clear design philosophy• 25 Years experience• 100% Australian owned family business• Award Winning Enterprise

• We empower our clients through design• We empower our clients through execution• We have deep knowledge, insights and experience• Innovation is in our blood

DISCRIMINATORS

INTERCHEM PTY LTDwww.interchem.com.au

David SewellGeneral ManagerInterchem Pty Ltd20 Harper Street, Abbotsford VIC 3067Tel: +61 3 9270 9600Email: [email protected]

• Specialty distributor of aviation lubricants and greases• Products available to military specification (NATO - US,

British, French; Russian)• Wide range of approvals for civil aviation engines and airframes

CAPABILITIES

• Australian Defence Force• Australian Border Force• Royal Flying Doctor Service• Cobham Aviation Services

KEY CUSTOMERS

• ISO 9001:2015


• Nyco S.A. (France)• Penrite Oil (Australia)

KEY PARTNERS

• Partnered with NYCO, the world leader in defence aviation with over 50 years’ experience

• More than 15 years’ experience in supplying Australian Air Force, Army and Navy requirements

• Australian Defence Recognised Supplier• Broad flexibility with order quantities and pack sizes• Australia-wide distribution network for any pack size

DISCRIMINATORS


PRODUCTS

SERVICES





PRODUCTS

SERVICES





53

JVATwww.jvat.com.au

James WhitehillDirector - AustraliaJVATLevel 2 / 51 Stephenson Street, Cremorne VIC 3121Tel: +61 (0) 455 787 007Email: [email protected]

• Risk Assurance - System Safety Program Training and Products• Software Assurance - Lifecycle Management and Planning of

Software Safety Functions• Health and Wellbeing - Planning and Delivery of Wellbeing

Programs and Seminars

• Governance and Culture - Business Continuity Planning and Management System Development

• Augmented Reality - Training and Development Solutions

CAPABILITIES

• Thales• Nova• Bombardier• NZDF

KEY CUSTOMERS

• ISO 9001:2015


• Consultants have and maintain sponsored Government Security Clearances

• Employ the Agile Project Delivery Method - value driven, highly visible and continuous stream of information

• Established International Defence clients outside of Australia

• Proven track record in complex Land and Maritime Defence platforms

• Innovative/Sustainable solutions - Analysis Techniques/Implementation Plans/Training - More than personnel filling

DISCRIMINATORS

KPMGwww.kpmg.com.au

Mike KalmsDefence Industry Lead PartnerKPMGTower 2, 727 Collins Street, Docklands VIC 3008Tel: +61 3 9288 5555Email: [email protected]

• Financial management, costing, budgeting and reporting services

• Assessing and accessing Government Incentives, including grants and the R&D tax incentive

• Technology advisory involving strategy and governance, security and controls and project assurance and support

• Business reform support covering planning, developing, executing and reporting on major transformation initiatives

• Project lifecycle support including proposal development support and independent review

• Export market development and Foreign Direct Investment strategy and due diligence

• Business advice including strategy and business case production, business process improvement

• Specialist SME and family business advisory services

CAPABILITIES

• All parts of Defence and Defence Industry• Able to work within an ITAR/TAA environment

KEY CUSTOMERS

• Vanguard Leader in Procurement 2015• Top 50 Providers to Know – 2014 and 2015• Management Consultant of the year 2016


• Proven track record supporting complex defence programs leveraging over 1,100 cleared consultants

• Experienced engineers and scientists with relevant industry experience

• Global network with 174,000 people across 155 countries

• Australia’s premier R&D Incentives and grants practice• Engineering and asset management for effective, efficient

and safe operation of physical assets• Experienced analytics, information and modelling group that

helps organisations leverage data resources

DISCRIMINATORS


PRODUCTS

SERVICES






PRODUCTS

SERVICES



Information Systems



54

L3 TECHNOLOGIESwww.L3T.com

Dean PavlickovskiOperations ManagerL-3 Communications Australia Pty LtdUnit 12, 75 Lorimer Street, Docklands VIC 3008Tel: +61 3 8645 2405Email: [email protected]

• Aerospace Systems delivers integrated solutions for the global ISR market

• Provides modernisation, upgrade, sustainment, & maintenance and logistics support for a wide variety of aircraft

• Airborne and Ground-Based ISR Systems• Networked ISR Communications

• Multi-Mission Aircraft Systems Development• Life Cycle and Logistics Support• Aerospace and Flight Sciences Engineering• Aircraft Systems Integration and Modification, Aerostructure

Fabrication and Assembly

CAPABILITIES

• Australian Department of Defence• United States Department of Defense

KEY CUSTOMERS

• ISO 9001• Supplier Continuous Improvement Program (SCIP)• DST Group Achievement Award


• Luerssen• BAE Systems Australia• Lockheed Martin

KEY PARTNERS

• Reach back to vast company capabilities in the USA• Extensive experience in complex systems integration

• Highly reliable and trusted partner• Sustainment within Australia

DISCRIMINATORS

LEONARDO AUSTRALIAwww.leonardocompany.com.au

Thomson HillHead of Sales & MarketingSelex ES Australia Pty Ltd19 Rocklea Drive, Port Melbourne VIC 3207Tel: +61 3 9698 0400Email: [email protected]

• Systems Engineering including design, development & integration

• Turn Key Systems through complex Project/ Program Management & through life support

• Targeting, Radar, Electronic Warfare, Mission Systems, Communications, Navigation and Identification

• Unmanned Air Systems - Rotary and Fixed Wing• Helicopters - Defence, Special Forces and Civilian• Simulation and Training• Test, Support & Repair Facilities

CAPABILITIES

• Royal Australian Airforce• United Kingdom Ministry of Defence• Ministero Della Difesa (Italy)

KEY CUSTOMERS

• ISO 9001• ISO 14001• DISP


• Airbus• Leonardo DRS• NH Industries• Partech Systems

KEY PARTNERS

• Ability to provide full Turn Key Solutions including platforms and capabilities

• Leonardo global reach for experience, know-how, technological solutions and Supply Chain

• Solutions for reconnaissance, surveillance, target acquisition and recognition ISTAR

• Full Member of the Defence Industrial Security Program (DISP)

• Helicopter categories from 1.8 tonne single-engine to 16 tonne three-engine

• Procurement Capability using SC21 Standards• Access to Defence Restricted Network (DRN) and Defence

Stores• Provider of Communications Upgrade for ANZAC Frigates

DISCRIMINATORS


PRODUCTS

SERVICES




Information Systems

Integration







PRODUCTS

SERVICES


Autonomous Systems



Information Systems

Integration






55

LMATS PTY LTDwww.lmats.com.au

Pranay WadyalkarDirectorLMATS Pty Ltd6 Techno Park Drive, Williamstown North VIC 3016Tel: +61 3 9399 9199Email: [email protected]

• One stop source for Asset Life Extension• Metallurgical, Mechanical & Corrosion testing• Failure investigations• Chemical analysis & PMI

• Advanced & conventional Non-Destructive Testing (NDT)• Third party Inspection & Pressure vessel Inspection• Hydro-static pressure testing• WPS & PQR Development & verification

CAPABILITIES

• BAE Systems Australia Williamstown & Bandiana VIC- Commo• BAE Systems Australia Defence Edinburgh SA• Australian Submarine Corporation SA - Osborn• Origin energy

KEY CUSTOMERS

• AS ISO 17025• NATA Accredited labs in Melbourne, Syd• BAE UK approved for Titanium IGA & NDT• Aust. Institute for NDT. Director, ICNDT & AP


• Single point of contact for Comprehensive range of tests• Australia wide coverage for on-site testing• Advanced NDT Services - PEC, ECA, PAUT, TOFD• Sealants, adhesives, gels, polymer tests

• Material Eng. & Ad. NDT combined Services• Multi skilled and cross skilled staff• Quickest Online reporting to save client’s time• Lean, Kaizen, Kanban, Poka.Yoka, 5S work System

DISCRIMINATORS

LOGISTIC ENGINEERING SERVICESwww.les.net.au

Warren SmithGeneral ManagerLogistic Engineering Services Pty LtdLevel 1, 7 Westside Avenue, Port Melbourne VIC 3207Tel: +61 3 8698 6400Email: [email protected]

• Integrated Logistic Support (ILS)• Logistic Support Analysis (LSA) and Logistic Support Analysis

Record (LSAR) Development• In-house designed, built and marketed software tool sets to

support ILS outcomes such as eMRD and eLORA

• ADAASS SME capability• Technical Spares Assessing/Inventory Management• Technical Authoring (AAP, ABR, CES, RPIL, UHB, ILSI, ILSP)• Engineering Analysis for Maintenance Requirements• Life Cycle Costing (LCC) and Level of Repair Analysis (LORA)

CAPABILITIES

• BAE Systems• Capability Acquisition and Sustainment Group• GH Varley• Rheinmetall

KEY CUSTOMERS

• AS/NZS 9001:2015• ADM Essington Lewis Trophy 2009• Defence Industry Security Program


• Nova Systems• KBRwyle

KEY PARTNERS

• Developed and deployed eMRD, eLORA, eLSA software suite Improved efficiencies DEFAUST 5692 Iss 2 compliant

• First choice provider to defence for Weapon System Data base and ADAASS support

• Continuity of service delivery• Transparency and reliability of service

• Unparalleled knowledge of Australian relevant standards• Depth of experience and expertise across Aerospace and

Aviation platforms• Excellent quality and value for money• Integration into the customer’s team

DISCRIMINATORS


PRODUCTS

SERVICES






PRODUCTS

SERVICES




56

MAGEFEKTwww.magefekt.com

Max CoulthardManaging DirectorMagefekt Pty LtdFactory 28 / 73 Assembly Drive, Dandenong South VIC 3175Tel: +61 3 9776 6058Email: [email protected]

• Can design & develop customised energy storage solutions• Battery manufacturing locally for over six years• Full service supplier from system concept, testing, project

management and installation• After sale service and support

• 24-hour remote monitoring capable• Maintenance service contracts available• Energy consulting/report analysis and site evaluations• Ability to provide hybrid energy solutions

CAPABILITIES

• South East Water• North East Water• Telstra• Heuch/Black Stump

KEY CUSTOMERS

• EcoPower Group• Renewable Energy Alliance Ltd• Victron Energy

KEY PARTNERS

• Manufacturer of customised, compact batteries for many applications/environments needing little space/ventilation

• Unique manufacturing ensures batteries need no artificial cooling & operate at full capacity at 60°C/high humidity

• Batteries safest, smallest, lightest, high energy dense 12V & 24V Lithium Iron Phosphate batteries known to be available.

• Australian designed, manufactured and maintained• Batteries have built-in diagnostics for easy analysis and reporting

• Batteries are internally fused to protect against human error causing product failure

• Flexible and fast connectors replace high risk battery terminals to eliminate potential sparks

• Batteries are fast charge and can discharge at up to 3c (210amps). Can be stored up to 2 years without recharge

DISCRIMINATORS

MANSI ON RAYMONDwww.mansi.com.au

Jeremy GreenGeneral ManagerMansi on Raymond474 Raymond Street, Sale VIC 3850Tel: +61 (0) 409 850 202Email: [email protected]

• 47 bed accommodation venue in Sale, Victoria• Options from Studios to 3 Bedroom Townhouses• Appropriate for short or long-term stays• Premium accommodation at a reasonable price

CAPABILITIES

• Lockheed Martin• Hawker Pacific• Pilatus• Airflite

KEY CUSTOMERS

• Gibsons Groundspread• Darriman Lime

KEY PARTNERS

• Private, sale & quiet accommodation• Close to East Sale RAAF Base• Professional Service from a dedicated team• Nicest accommodation in our area

DISCRIMINATORS


PRODUCTS

SERVICES




PRODUCTS

SERVICES


57

MARANDwww.marand.com.au

Alex LyonBusiness Development ManagerMarand Precision Engineering Pty Ltd153 Keys Road, Moorabbin VIC 3189Tel: +61 3 8552 0600Email: [email protected]

• Design, feasibility studies, specification writing, concept development

• Manufacture, systems integration, prototype development, through life support

• Complex Defence sub-assembly production both aerostructures and GSE

• Complete turnkey production facilities set-up• Lay-up and assembly tooling for all metallic and carbon

fibre composite assemblies• Liquid moulding tooling, resin injection and infusion systems• Highly efficient DC Electric motors/generators• Fatigue testing equipment & training devices

CAPABILITIES

• Lockheed Martin (Source Acceptance Approval)• BAE Systems (Source Acceptance Approval)• Boeing• CEA Technologies

KEY CUSTOMERS

• AS/EN 9100C / ISO 9001, ISO 14001, ISO/IEC 170• 2014 - CIPS international procurement project of the year• 2014 - BAE UK- MAI procurement award best relationships award• 2014 Manufacturers monthly Endeavour award - Manufacturer

of the year


• Australia’s largest proven and trusted Aerospace Tooling, Automation, Robotics, and Systems Integrator

• Designer and sole source manufacturer of the JSF F-35 Engine Removal and Installation Trailer

• Strategic second source for the Joint Strike Fighter Vertical tail production

• Largest Australian aerostructures manufacturing supplier on F-35 program

• Ability to successfully manage large and diverse supply chains on complex Defence projects

• Awarded for success in completing complex technical transfer on Defence programs

• Highly successful critical path Tier 1 tooling and facility supplier on international programs

• Proven ‘Best Value’ solutions provider to international and local aerospace, defence & rail industries

DISCRIMINATORS

MATRIXwww.matrix.co.nz

Malcolm AbellBusiness Development ManagerMatrix521 Kooyong Road, Elsternwick VIC 3185Tel: +61 3 9596 0390Email: [email protected]

• CAE for FEA Analysis, CFD analysis, Composite Structural Analysis

• Configuration management software and implementation services for Aras Corp.

• Aras PLM software for managing your digital thread• Blue Cielo software for engineering content management

• Systems integrations using Aras Innovator as a central core system

• PLM/PDM /Configuration Management software from ARAS, Corp/Accruent Meridian - Blue Cielo ECM software

• ITAR control with Aras Innovator for life-cycle management• Composite structural analysis

CAPABILITIES

• EOS Defence Systems• Northrop Grumman• Rakon• NZ Defence Department

KEY CUSTOMERS

• Aras Corporation• Tedds• Accruent Meridian

KEY PARTNERS

• Shock analysis for NZ Frigates• Composites analysis for Emirates America Cup Team NZ• Aras Innovator PLM deployments for defence contractors in

the Land, Aerospace and digital space• ITAR control for life-cycle management for Aerospace defence

prime

• Composite structural analysis for helicopter engine housing• Change management/BOM management with Aras Innovator• MRO serial part tracking for upgrades over life of helicopters

DISCRIMINATORS


PRODUCTS

SERVICES



Integration





PRODUCTS

SERVICES


Information Systems

Integration


58

MEMKO PTY LTDwww.memko.com.au

Miro MileticManaging DirectorMEMKO Pty Ltd455 Bourke Street, Melbourne VIC 3000Tel: +61 3 8605 7777Email: [email protected]

• Design, Analysis, Test and Certification of aeronautical products

• Continued Airworthiness Management services

• Design and Delivery of technical and regulatory training• Supply, maintenance and development of ISS solutions, CATIA,

DELMIA and 3DExperience PLM System

CAPABILITIES

• Boeing Defence Australia• BAE Systems• Airbus Group Australia Pacific• Department of Defence

KEY CUSTOMERS

• AS 9100 Rev D• ISO 9001:2015• Dassault Systemes Accredited Solutions Partner• Dassault Systemes Accredited Education Partner


• Dassault Systemes

KEY PARTNERS

• Significant track record in supporting Australian Defence and defence primes

• Highly capable and experienced staff• Representation of Industry leading software solutions by

Dassault Systemes

• National coverage with offices in Melbourne, Sydney, Brisbane and Perth

• Internationally accredited Qaulity Management System

DISCRIMINATORS

MET OPTIXwww.metoptix.com.au

David EldridgeGeneral ManagerDWE Systems Pty Ltd84 Hotham Street, Preston VIC 3072Tel: +61 1300 363 409Email: [email protected]

• 3D laser scanning and modelling• 3D measurement with fixed and portable coordinate

measuring machines (CMMs)• Surface roughness and form measurement• Surface defect analysis

• Hardness testing• Force and materials testing• Optical alignment using alignment telescopes and laser

alignment systems• Laser projection system for automated assembly

CAPABILITIES

• Ruag Australia• Thales• Department of Defence• Royal New Zealand Airforce

KEY CUSTOMERS

• Taylor Hobson• Alicona• TESA• 8tree

KEY PARTNERS

• The world’s leading metrology and testing products• Factory-trained and accredited technicians for calibration and

verification of equipment accuracy• Software support engineers able to provide first-level support

on all products sold in ANZ

• 24/7 support services via a network of world-wide offices of our Partners and overseas Principals

• Regional support for Victorian customers

DISCRIMINATORS


PRODUCTS

SERVICES




Information Systems

Integration



PRODUCTS

SERVICES






59

MICRO PLANNING INTERNATIONALwww.microplanning.com.au

Raphael M. DuaCEO & OwnerMicro Planning International Pty LtdPO Box 7177, Melbourne VIC 3004Tel: +61 (0) 418 531 111Email: [email protected]

• RAAF - Orion Maintenance at 492 Squadron using Micro Planner X-Pert for R3 to R5 Refits

• RAAF - HS748 Maintenance at Maintenance Squadron - East Sale Planning and Scheduling

• RAAF F18A Refurbishment for ARDU at Edinburgh using Micro Planner X-Pert

• GASG – Air 87 Planner and Scheduler ARH – GASG – Tactical Fighter Planner and Scheduler –

• RAAF F-111C R3-R5 Maintenance for 501Wing at Amberley Planning and Scheduling and software Micro Planner X-Pert

• Boeing – Earned Value and Project Controls for F-111 Upgrades and Servicing’s

• GAF Construction of Mirage Fighter Planning and Scheduling Consultancy

CAPABILITIES

• DoD - GASG• Boeing Australia Ltd• Australian Aerospace Ltd• QANTAS Defence systems

KEY CUSTOMERS

• ASC Manufacturing and Support 1993• Apple Macworld Awards for Best Scheduling App• PC World 1996 – Best Resource Management S/W


• Vidotto Group of Companies• Greenwich Advisory• LBMS Pty Ltd

KEY PARTNERS

• Defence Knowledge and Experience• Innovation through Application of Technology• Specialist Project Management Software Internationally Proven• Conforms to the project management standards AS4335,

AS4817:2006, EAI_ANSI 748-C

• It handles multiple projects located in several domains even in overseas as used by NuSub Collins Construction

• Cost competitive• Fully Supported in Australia, Germany, US, UK, NZ and Globally

DISCRIMINATORS

MILSPEC MANUFACTURINGwww.milspecmanufacturing.com

Neil MorrisonGeneral ManagerMilspec Manufacturing Pty Ltd874 Knight Road, North Albury NSW 2640Tel: +61 2 6022 7100Email: [email protected]

• Cable harness: design, manufacture and test• Electronic/mechanical mssembly• Enclosures, racking systems and cabinets• Testing: CMM, environmental, RF, EMC and IP• Precision CNC machining, CNC sheet metal and fabrication

including robotic welding

• Surface finishing: chromate, powder coating and wet paint• Power Products: alternators, APUs, PDUs, interface switch

boxes, and exportable power solutions• C4i equipment mounting kits

CAPABILITIES

• BAE Systems - Nulka decoy canister systems• Thales - power/electric products• Rheinmetall - metal and power/electric products• Boeing - communication systems boxes

KEY CUSTOMERS

• AS/NZ ISO 9001:2008• AS 9100 Rev D• AS/NZ ISO 3834• IPC 610 and 620


• Australian Industry & Defence Network• Australian Industry Group• Works for most multinational defence primes

KEY PARTNERS

• Wide range of in-house electro mechanical capabilities• Smallest/lightest MIL-STD 28V, up to 900Amps alternators• World wide product support and ITAR compliant

DISCRIMINATORS


PRODUCTS

SERVICES



PRODUCTS

SERVICES




Integration




60

MOOG AUSTRALIAwww.moog.com.au

David MorrisDirector of Sales & Business DevelopmentMoog Australia Pty Ltd18 Corporate Drive, Heatherton VIC 3202Tel: +61 3 8545 2110Email: [email protected]

• OEM designer and manufacturer of high precision EM/EH motion control products and systems

• Hydraulic, pneumatic, electro-mechanical and hybrid technologies

• Din rail electronics manufacture and Product Life-cycle Management

• Through Life Support on major Defence platforms such as F/A-18, UH-60, SH-60, ASLAV, M113, M1A1, LHD & Collins

• On-site capability for service and support of power generation actuation and control

• Engineering value add services such as design, feasibility studies, specification verification and FMEA

• Logistics and Supply Chain Management of Moog’s installation base across Aerospace, Defence and Industrial systems

• On-site training facilities for technicians and service engineers

CAPABILITIES

• Air: RAAF, Boeing, Cobham, NZDF, Sikorsky• Land: Army, BAE, Elbit, EOS, GDLS, NZDF, SAAB• Sea: RAN, ASC, Austal, BAE, Thales• Research: DSTG, CSIRO & University Partners

KEY CUSTOMERS

• ISO 9001:2015• ANSI/ESD 20:20• IPC-A-610 / IPC-7711 / IPC-7721• MIL-STD 1275C/MIL-STD 810F


• Moog Inc and subsidiaries

KEY PARTNERS

• Design, manufacture & sustainment of EM/EH motion control systems for defence including air, land & sea platforms

• Comprehensive test suites covering environmental and full system testing of electronic and mechanical systems

• Sustainment through in country assets for motion control equipment; Electronics, Pneumatics, Hydraulics and EM

• Reverse & Upgrade engineering capability of obsolete servo control systems, actuation and hardware

• ITAR compliant and trained workforce in secure locked down facility with military grade surveillance

• Optimised purpose built facility with Lean layout, R&D labs, training facilities and secure storage

• Design, assembly and integration of simulation platforms (1-7 DOF) and motion and vibration test solutions

• A customer centric approach centered around working closely with key Government agencies and stakeholders

DISCRIMINATORS

MOTHERSON ELASTOMERS PTY LIMITEDwww.motherson.com.au

Jason GilhooleyNational Technical Sales ManagerMotherson Elastomers Pty Limited48-86 Powell Street, East Bendigo VIC 3550Tel: +61 3 5440 1485Email: [email protected]

• Rubber anti-vibration products including rubber mouldings and rubber to metal bonded components

• Engine Mounts, Transmission Mounts, Machine Mounts, Wheel Chocks

• Rubber Extruded products for automotive sealing systems and industrial extrusions

• Rubber compound mixing- Natural rubber EPDM, Chloroprene, Nitrile, Viton etc.

• Uncured precision calendared sheet

CAPABILITIES

• Fenner Dunlop• Blackwoods• Bombardier Transportation• Paccar Trucks

KEY CUSTOMERS

• ISO 9001• ISO 14001


• Samvadrhana Motherson• Industrial Organics• Blackwoods• Ikad Engineering

KEY PARTNERS

• Largest non tyre rubber manufacturer in the southern hemisphere• Long history of supplying components to the automotive

industry• In house Industrial Chemist and Development Team

• Continuous product and rubber compound development• Technical support from a world class automotive component

manufacturer• In house testing facility

DISCRIMINATORS


PRODUCTS

SERVICES


Autonomous Systems






PRODUCTS

SERVICES



61

NEXUS TRAINING SOLUTIONSwww.nexustrain.com

Michael ThwaitesOperations ManagerNexus Training Solutions Pty Ltd22 Catherine Street, Coburg North VIC 3058Tel: +61 (0) 404 004 233Email: [email protected]

• End-to-end Training support including - Analysis, Design, Development, Delivery & Evaluation

• Exercise Design and Implementation• Specialist Instructors & Training Teams

• Simulation Integration and Support• Policy & Procedure Development• Decision Making Training• Voice of Customer

CAPABILITIES

• Extensive Defence Operational & Training Experience• Joint Fires Specialists• Australian Owned, Victoria based

• Global Training Experience• Australian security clearences

DISCRIMINATORS

NORTON CONSULTANTS PTY LTDwww.nortonconsultants.com

Cameron DorroughExecutive DirectorNorton Consultants Pty Ltd207 Blackburn Road, Mount Waverley VIC 3149Tel: +61 3 9802 9244Email: [email protected]

• Electrical, Control and Automation systems engineering consulting services

• Aviation fuel storage and hydrant systems process engineering, design and commissioning

• Aircraft ground support and engine test facilities design

• Project feasibility and FEED studies• AS/NZS 60079 Hazardous Area Assessments• HAZOP, HAZAN• Suppliers of HansaConsult TCS airport fuel hydrant leak

detection systems within Australasia

CAPABILITIES

• Air BP• Viva Energy Aviation• Mobil Oil Australia• Caltex Australia Petroleum

KEY CUSTOMERS

• Schneider Electric• Servelec Technologies• hansaconsult Ingenieurgesellschaft mbH

KEY PARTNERS

• Specialist expertise in aviation fuel storage and aircraft refuelling facilities control systems design

• Recognised expertise in the design and commissioning of airport fuel hydrant systems

• Design of highly-reliable (100% up-time) electrical power and control systems for defence and industry

• Energy Safe Victoria class H Licensed Electrical Inspector

DISCRIMINATORS


PRODUCTS

SERVICES


Integration





PRODUCTS

SERVICES




62

NOVA SYSTEMSwww.novasystems.com

Jeff PerryGeneral Manager - Aerospace & SurveillanceNova SystemsLevel 2, 95 Coventry Street, Southbank VIC 3006Tel: +61 3 9024 1851Email: [email protected]

• Verification and Validation and Test and Evaluation of aerospace, maritime and land systems

• Aircraft Type Certification in both the legacy ADF Defence Aviation Safety Program and the new DASR

• System Safety including Software Assurance in aerospace and Workplace Health and Safety

• Simulation and Synthetic training including simulator fidelity accreditation

• Aerospace engineering design, including structural and avionics modifications/repairs

• Aerospace program/project management including risk management

CAPABILITIES

• CASG• Lockheed Martin• Airbus Group• Boeing Defence Australia

KEY CUSTOMERS

• ASNZS 4801 - Safety• ISO 14001 – Environment• CASA 21M and EASA21J


• GVH Aerospace (member of Nova Group)• Auspace (member of Nova Group)• Geoplex (member of Nova Group)

KEY PARTNERS

• Extensive experience in Defence T&E and managing large V&V programs for both CoA and Defence Industry

• One of the largest providers of Aircraft Type Certification services. Our subsidiary, GVH is a EASA 21J org.

• Prime provider of System Safety services in Defence and Defence industry including a unique capability in software

• Unique capability in simulation development and accreditation of Aerospace Simulators for Defence

• CASA 21M and EASA21J Design Approvals with design offices in Australia, Singapore and the UK

• Extensive experience in the introduction into service of major aerospace capabilities in the ADF

DISCRIMINATORS

OCEAN SOFTWARE PTY LTDwww.ocean.software

Rodney BloomCEOOcean Software Pty LtdLevel 40, 120 Collins Street, Melbourne VIC 3000Tel: +61 3 8614 7200Email: [email protected]

• Software engineering services covering the complete product life cycle through to long term sustainment

• Project management above and below the line, with staff experienced in Defence operations, procurement, and ICT

• Delivery of Integrated solutions for joint force and coalition operations

• Tailored training services to improve software utilisation, including the provision of LCMS and LMS solutions

• Operations process optimisation, while improving safety, compliance, and communications

• Reporting and data analysis services to deliver insight and resolve problems

• AppKit development for application deployment to your trusted and secure environments

• We are the Development team behind FlightPro, MEMS, PILS and CoastPro COTS products

CAPABILITIES

• Australian Defence Force, RAAF, & Army• Royal Canadian Air Force, NATO Flight Training• RAF UK, European Defence Agency,• Finnish Defense Force, Belgian Air Component

KEY CUSTOMERS

• ISO 9001:2015• Defence Preferred Supplier• AIDN-Vic & Victorian Defence Alliance Members• Victorian Export Award Winner


• BAE Systems• Thales• Boeing• Microsoft Gold Partner

KEY PARTNERS

• Delivering fit for purpose commercial off the shelf IT solutions to defence forces globally for over 23yrs

• We design, build, implement, integrate, train, support, and maintain solutions to ISO 9001:2008 standards

• Proven track record in the delivery and sustainment of multiple COTS software products to Defence forces

• Our development, services. & delivery teams comprise of many industry experienced and ex-military ops personnel

• Supporting 12 militaries, and multiple Defence Prime customers across 14 countries

• Our people deliver streamlined operations management solutions within highly complex command & control environs

• Workforce includes AGSVA security cleared, PRINCE2, PMBOK and ex-Commonwealth

DISCRIMINATORS


PRODUCTS

SERVICES


Autonomous Systems



Information Systems

Integration






PRODUCTS

SERVICES



Information Systems

Integration



63

OPAQUE MEDIA GROUPwww.opaque.media

Christian FultonBusiness Development ManagerOpaque Multimedia101/672 Glenferrie Road, Hawthorn VIC 3122Tel: +61 (0) 430 080 558Email: [email protected]

• World-leading simulation development• AIVA: Training tracking software capable of being integrated

into new or existing simulation environments• AIVA: Simulation effectiveness tracking for training simulations

and other simulations• AIVA: Highly usable software allows trainers to define learning

outcomes for simulations

• AIVA: Ability to describe learning for an individual in interchange format building on xAPI

• AIVA: Real time and aggregate/historical simulation data analytics, visualisation and AIdeep

• Simulation effectiveness and design consulting• Technical integration consulting for simulation technologies

CAPABILITIES

• NASA• Boeing• ADF• USAF

KEY CUSTOMERS

• Microsoft Imagine Cup• Australian Game Developer Awards (x2)• Asia Pacific ICT Awards & iAwards (x4)


• Microsoft• Noitom• Opaque Studios• Epic

KEY PARTNERS

• World-leading simulation developers, hailed by clients with a 100% satisfaction rate

• Comprehensive capability to modify COTS and custom simulation software to suit client needs

• Broad experience with biometrics, haptics and intelligent edge devices and data sources

• AIVA software runs seamlessly on cloud or local systems

• Extensive experience with data interchange and analysis in simulation context, including AI (CV/ML/DL)

• Highly regarded for the creation of future proof software interfaces and robust developer & user experiences

• Deep partnership approach yeilds better outcomes and ensures complex domain specific requirements are captured

DISCRIMINATORS

PELICAN-TRIMCAST PRODUCTS PTY LTDwww.pelicanaustralia.com

Justin EvansSales ManagerTrimcast Products Pty Ltd2 Forbes Close, Knoxfield VIC 3180Tel: + 61 3 9765 1500Email: [email protected]

• Reusable plastic shipping and storage containers• Custom Advanced Case Solutions• Designed and manufactured to DEFAUST 1000c packaging

standards

• Custom rotomoulders• Design, develop, test and manufacture capability in Victoria.

CAPABILITIES

• Rolls Royce• Lockheed Martin• Airbus• Boeing

KEY CUSTOMERS

• Pelican Products

KEY PARTNERS

• Experience in designing more than 1500 NSN cataloged packaging solutions.

• Manufacturers of the largest plastic cases in the world• Solutions are up to 30% cheaper than metal case alternatives• Solutions are superior to timber packaging in product

protection and re usability.

• Capacity to mobilise and deliver in short lead times, to meet urgent operational requirements.

• Patented, innovative, cost saving solutions.• Largest range of ‘off the shelf’ and bespoke solutions• Global support, research and manufacture facilities

DISCRIMINATORS


PRODUCTS

SERVICES


Information Systems

Integration




PRODUCTS

SERVICES


64

PERFORM ZONEwww.performzone.com

Daryl KeeleyManaging DirectorPerform Zone183 Burwood Road, Hawthorn VIC 3122Tel: +61 3 9573 1554Email: [email protected]

• Vendor Management• Recruitment Software• Leadership training

CAPABILITIES

• ASD• DHS• DFAT• DST Group

KEY CUSTOMERS

• Complies ISO 9001• Complies with ISO 27001


• MACRO Recruitment

KEY PARTNERS

• 25 Recruitment agencies under one banner• Meets Australian Defence Cyber Security standards• DISP accredited• Robust innovative eHRMS• Proven track record in providing defence cleared contractors

DISCRIMINATORS

PHM TECHNOLOGYwww.phmtechnology.com

Chris SteckiCEOPHM Technology Pty Ltd9/120 Queens Parade, Fitzroy North VIC 3068Tel: +61 3 9482 2007Email: [email protected]

• Airworthiness Certification (FMEA, FTA, RBD)• Maintenance Determination (MTA, RCM, B-RCM)• CBM design and validation (Fault Detection / Isolation,

diagnostic reasoners)

• Integrated Logistic Support (engineering)• Life Cycle Costing (engineering based)

CAPABILITIES

• US Air Force• Pratt & Whitney• NASA JPL• Turkish Aerospace Industries

KEY CUSTOMERS

• SME Innovation Award (Pacific 2013)• JSF JSTAB (2007-09)• Letter of Recognised Supply• IBM R&D Award (AIIA 2009)


• Siemens Industrial Software• ISID• KBR Wyle

KEY PARTNERS

• Model-based engineering analysis solution• Integrated tool chain for Safety, Reliability, Maintainability and

Testability analyses• Automation of failure analysis (dependency mapping)• Engineering / program decision support for acquisition, design

and sustainment

• Native integration with Teamcenter PLM / CAD• Configuration Management of engineering analysis across

the Capability Lifecycle• Performance Based Contract management (engineering

validation of support based on C/R/E)

DISCRIMINATORSAEROSPACE CAPABILITY AREAS

PRODUCTS

SERVICES



PRODUCTS

SERVICES


Autonomous Systems



Information Systems

Integration




65

PILATUS DEFENCE SOLUTIONS AUSTRALIAwww.pilatus-aircraft.com

Rob OliverCEOPilatus Defence Solutions Australia Pty LtdPO Box 404, Sale VIC 3850Tel: +61 3 5143 5428Email: [email protected]

• Aircraft Design, Manufacture, Sales and Support for the Pilatus range of aircraft

• Aircraft engineering for the Pilatus PC-9, PC-12, PC-21 and PC-24 aircraft

• Spares support for the Pilatus PC-9, PC-12, PC-21 and PC-24 aircraft

CAPABILITIES

• Australian Defence Force• Republic Of Singapore Defence Force• Royal Flying Doctor Service• Many State Police Forces and private owners

KEY CUSTOMERS

• EN9100• ISO 14001


• Pilatus Aircraft Ltd of Switzerland

KEY PARTNERS

• Pilatus is the world leader in the production of single engine turboprop aircraft

• The Pilatus PC-9 and PC-21 are the trainer aircraft for over 25 Defence Forces including the ADF and RSAF.

• The new PC-24 jet aircraft provides a unique and beneficial mix of performance and operating costs.

DISCRIMINATORS

POWERJUMPwww.powerjumptechnologies.com.au

Lorna McLachlanManaging DirectorPowerjump Technologies Australasia Pty Ltd120 Queens Parade, Fitzroy North VIC 3068Tel: +61 (0) 478 665 257Email: [email protected]

• Electrical Design Technology• Certified representative Australia/New Zealand for Zuken

technology (www.zuken.com)• Electrical design software sales, training & support

• Electrical design contract resources• Electro/mechanical technology integration

CAPABILITIES

• Lockheed Martin Australia• AME Systems Pty Ltd• Elbit Australia Pty Ltd• L3 Communications Australia Pty Ltd

KEY CUSTOMERS

• Zuken

KEY PARTNERS

• Proven track record in complex defence requirements• Strong representation among major harness manufacturers• In person, on site support services by qualified engineers

DISCRIMINATORS


PRODUCTS

SERVICES






PRODUCTS

SERVICES




Integration


66

PRECISE AMGwww.precise-amg.com

Greg DayeBusiness Development ManagerPrecise Global Pty Ltd3 Midhurst Court, Craigieburn VIC 3064Tel: +61 (0) 409 964 540Email: [email protected]

• Precision Machining & Assemblies Moulded, Cast & Stamped Parts

• Tooling, Jigs, Fixtures & Gauges• Fabrication & General Engineering

• CAD / CAM• Prototypes & Reverse-engineering• Project Management• Emergency Pipe Repair Solutions (pipe lever clamps)

CAPABILITIES

• BAE Systems: Weapons, Missiles Surveillance• General Dynamics: Components for ASLAV• Babcock and Australian Submarine Corp• Air Warfare Destroyer

KEY CUSTOMERS

• ISO 9001/2015• ITAR Approved (QPE Machining Division)


• DST Group• Australian Dept of Defence• Australian Industry Defence Network (AIDN)• Attorney General’s Department

KEY PARTNERS

• Defence recognised supplier• Local & offshore manufacturing• Advanced Manufacturing knowledge

• Diverse manufacturing capabilities• ISO Accreditation• Highly Skilled & Flexible workforce

DISCRIMINATORS

QINETIQ AUSTRALIAwww.QinetiQ.com.au

Nicholas FaugheyAccount ManagerQinetiQ Pty LtdLevel 3, 210 Kings Way, South Melbourne VIC 3205Tel: +61 3 9694 1002Email: [email protected]

• Aircraft Structural Integrity Engineering• Aerospace Advisory Services• Aircraft Health Usage Monitoring• Non-Destructive Testing

• Aerospace Engineering Design and Repair• Access to global Aircraft Test & Certification capabilities• Manufacturing / Fabrication / Assembly of bespoke prototypes

and parts

CAPABILITIES

• Defence Aviation Safety Authority• Capability Acquisition & Sustainment Group• Australian Defence Force• Major Defence and Civil Aerospace OEMs

KEY CUSTOMERS

• AS/NZS ISO 9001: 2015• 2015 GASG/Industry Award for Minor Sustainment• 2015 AIDN-ACT Young Achiever of the Year Award• 2015 Defence Teaming Centre Employer of Choice


• QinetiQ Group plc• Commerce Decisions• Optasense

KEY PARTNERS

• DASR Part 21 Subpart J Accreditation (scope extends across all ADF aircraft)

• Strategic Partnership with Defence Aviation Safety Authority and Defence Science & Technology Group

• Largest number of Aerospace Structural Engineers in Australia with a catalogue that exceeds 3,500 approved designs

• Member of Defence Industry Security Program• All Consultants and Engineers have Australian Security

Clearances• Collaborative research programs with DST Group• Ability to provide independent services from design, through to

test and certification

DISCRIMINATORS


PRODUCTS

SERVICES




PRODUCTS

SERVICES


Autonomous Systems


Information Systems

Integration





67

QUARTEK PTY LTDwww.quartek.com.au

Frank CoricaCommercial DirectorQuartek Pty Ltd ATF The Quartek Unit TrustSuite 1.06, 85 Gladstone Street, South Melbourne VIC 3205Tel: +61 (0) 409 800 131Email: [email protected]

• Static Strength Analysis• FEA - Linear Static, Dynamic, Thermal and Buckling, Non-

Linear, Large Displacement and Post-Buckling Behaviour• Fatigue and Damage Tolerance (F&DT) Analysis - Crack

Growth, Fatigue Stress & Life Prediction• Structural Design & Weight Optimisation

• Highly Experienced with Metallic, Composite & Hybrid Structures

• Capability Enhancement• Project Management• Through Life Support & Life Extension Programs

CAPABILITIES

• Boeing Defence Australia• Airbus Australia Pacific• QuEST Global Engineering

KEY CUSTOMERS

• ISO 9001:2015• CASG DSS Panel Member


• ATTAR• AIDN

KEY PARTNERS

• Achieved ‘World’s Best Practice’ Customer Satisfaction Rating by Airbus Australia Pacific

• Team Previously Engaged on Many Projects of Global Significance, Including F35 JSF, A400M, A380, A350, Hawkei and Chinook CH-47D

• Lean Cost Structure• Flexible, Client Tailored Engagement Models

• Remote & Off-site Working Expertise - Framework Established for ‘24 Hour Business Cycle’

• Agile and Dynamic Team Able to Continuously Provide Exceptional Value

• Privately Owned Australian Company• ITAR Ready

DISCRIMINATORS

R&I INSTRUMENT & GEAR CO (AUST) P/Lwww.rigear.com.au

Andrew RowellGeneral ManagerR & I Instrument & Gear Co (AUST) Pty Ltd385-393 Lower Dandenong Road, Dingley Village VIC 3172Tel: +61 3 9552 6565Email: [email protected]

• CNC Gear Cutting; CNC Gear Grinding (Ø 800 mm x 600 mm wide) Gear cutting Ø 3.0 mm to Ø 160 mm

• CNC Lathes including Robot loading; Sub spindles; Y axis & Swiss style gang tool.

• CNC Milling – 5 Axis simultaneous (pallet loading) & 3 or 4 axis (up to 3 mt bed)

• CNC Vertical Lathe – Max Ø 1200 mm with C axis milling.

• CNC Cylindrical Grinding & Precision Honing Ø 3 – 150 mm• Horizontal & Vertical Broaches; Internal Key way Slotting to

800 mm long• CMM - Brown & Sharp 1800 x 1000 x 900 mm. Vision

Inspection – MicroVu, Optical Comparators and Gear Inspection• Extensive range of Metrology equipment Hardness Testing &

Surface Tester (Mititoyo & Accrutech)

CAPABILITIES

• Trakka Corp Pty Ltd• Leica Biosystems Melbourne• EOS Defence Systems• BAE Systems Australia

KEY CUSTOMERS

• AS 9001/2015. CERT-0124456• AS 9100D. CERT-0124456


• Hardman Bros Pty Ltd - owner of R&I since 1999• Marks 4WD sister company in Hardman group 2011• Thyssen Krupp Aerospace• Electromold Australia Pty Ltd

KEY PARTNERS

• Over 160 years combined history between our 3 Companies. R&I (1948) Hardman Bros (1953) and Marks 4WD (1979)

• Over 120 machines located within 3 buildings with almost 8000 m² of floor space located on a 5 acre site

• Access to the most diverse range of gear cutting machines on site in Australia

• Extensive range of CNC and traditional machinery with over 100 machines in commission on site

• Meeting customer demands for AS 9100; AS 9001; FDA; RoHS etc with full traceability

• Fine pitch & Course Pitch gear cutting capabilities (Metric & Imperial) across most types of gears

• Proven capabilities developed and refined since first established in 1948 controlled by our ERP System

DISCRIMINATORS


PRODUCTS

SERVICES



Integration





PRODUCTS

SERVICES



68

REALM - SOLUTIONS FOR THE FUTUREwww.realmsolution.com.au

Jeff WalshPrincipalREALM Solutions (SA) Pty Ltd11/194 Alma Road, St Kilda East VIC 3183Tel: +61 (0) 421 685 327Email: [email protected]

• Aircraft Design and Performance Assessment: (for) acquisition, upgrade, T&E, validation & service life monitoring

• Systems Engineering: concept & capability definition, performance & technical specification, and design review

• Requirements Management & Compliance demonstration via modeling, simulation, measurement, test and verification

• Specialty Engineering for maintainability, reliability, availability, compatibility, producibility & human factors

• Maintenance Engineering analysis, service life assessment and extension, and obsolescence management

• Logistics Support determination: strategy, concept, definition, modeling, analysis, and life cycle management

• Quality, Safety & Risk Management: enterprise & project risk, process & compliance, competency audit and training

• Business System analysis and assessment: (of) strategy, implementation, process, performance and sustainment

CAPABILITIES

• Defence Capability & Sustainment Group• Defence Science Technology Group• BMT Design and Technology• Australian Rail Track Corporation

KEY CUSTOMERS

• Project Management - Training & Practice• Training Design, Delivery & Assessment• Systems Engineering: Design, Test & Evaluation• ISO 9001 Defence Quality & Compliance Auditor


• Resonate Systems / Resonate Acoustics Pty Ltd• KneeDeep: Management Leadership Training RTO• AOC International - Electronic Warfare Assn• Insight Telecommunications / STM Consulting

KEY PARTNERS

• Design Standards (ISO/AS9100 series, DO-178, MIL-E-6051, MIL-STD-461/462) compliance, verification and assessment

• Bespoke Vibro-Acoustic capability & applications: (for) instrumentation, data capture and information analysis

• Maintenance and engineering analysis, service life assessment & extension, and reliability centred maintenance

• Strong record in rapid design & delivery of defence capability, secure infrastructure & support systems

• Instrumentation, Data Acquisition & Analysis: (for) asset condition monitoring and system performance analysis

• Design & Delivery of C4ISR capability secure communications, radar surveillance, and airborne EW systems

• Training, Skills Mapping & Competency assessment: performance needs analysis, design, delivery and sustainment

• High Value & Complex Project Management: cost & schedule planning, implementation & review, reporting and training

DISCRIMINATORS

RED BARON ALSEwww.redbaronalse.com.au

Greg BayneManaging DirectorBayne Group Pty Ltd27 John Duigan Drive, Yarrawonga VIC 3730Tel: +61 3 5744 2166Email: [email protected]

• Next Generation Aviation Flight Helmet sales, service, repair, refurbishment and upgrade

• Customised communication for Helmets including noise reduction systems CEP, ANR and Hush kit

• NVG interfacing to helmets and Assessories - Lip lights and finger lights

• Premium Life Vest, Life rafts and Anti Exposure Suit sale and support

• Survival equipment sales and support including PLBs, flares, signal mirror

• Aviation Life Support Consultancy with high bench mark globally

• Military Aviation Life Support Equipment approved service centre

• Multiply project facilities - Yarrawonga Vic, Fyshwick ACT and Nowra NSW

CAPABILITIES

• Department of Defence• Australian Government Federal and State• Defence Primes• Major Aircraft and Helicopter organisations

KEY CUSTOMERS

• Military approved service centre• Defence approved supplier (Z0LY2)• ACR battery replacement centre• Quality systems with ISO Pending


• Switlik Survival products• Paraclete Aviation Life Support• Proflight Gear• Northwall

KEY PARTNERS

• Australian stockist of ALSE equipment in country with reduced lead times

• Security cleared project ALSE manager and staff• 30+ years of defence and commercial life support experience

with successful project outcomes• Aviation Life Support Research and Development and product

commercialisation

• Some lightest products on the market for platform weight reduction

• Dedicated Switlik technical sales advisor for government and defence solutions

• Australian owned company with in country support• Defence Approved Supplier (Z0LY2)

DISCRIMINATORS


PRODUCTS

SERVICES


Autonomous Systems



Integration




PRODUCTS

SERVICES



Integration





69

REFUEL INTERNATIONALwww.refuelin.com

Matthew BennHead of Business DevelopmentSunshine Refuellers602-606 Somerville Road, Sunshine West VIC 3020Tel: +61 3 8311 6600Email: [email protected]

• Design and Manufacture Aviation Refuelling Equipment• Design and Manufacture Fuel Handling Pumping Systems• Design and Manufacture Marine Bunkering Vehicles

• Design and Manufacture fuel additive injection systems• Supply Aviation Refueling Industry Spare Parts• Offer Local and International Vehicle Support

CAPABILITIES

• AirBP• Exxon Mobil• Australian Defence Force• NZ Defence Force

KEY CUSTOMERS

• ISO 9001:2015 Accredited• Defence Recognised Supply Scheme• Sole approved supplier for AirBP A.N.Z.• Essington Lewis Award - Runner up


• Velcon• Elaflex• Carter• Isoil

KEY PARTNERS

• 50 years, leading design and manufacture of aviation ground fuelling technology

• 30 years, Prime supplier of aviation ground fuelling equipment to the Australian and NZ Defence forces

• Safety, compliance, longevity and ease of use all in the same vehicle

• Customized designs - offering turnkey solutions• Vehicle systems can be remotely analysed anywhere in the world

DISCRIMINATORS

RELAY INDUSTRIALwww.relayindustrial.com.au

Rohan LayGeneral ManagerGippsland Bolts and Fasteners Pty Ltd13-17 Princes Highway, Sale VIC 3850Tel: +61 3 5144 5633Email: [email protected]

• Bolts, nuts, washers and fasteners to DIN, ISO, EN and AS standards• Welding wires and filler metals, welding torches and

consumables, welding machinery and accessories• Specialty and custom fasteners and washers including Nord-

Lock, Solid-Lock and Lindapter products• Personal Protective Equipment (PPE), workshop and site safety

products

• Klingspor abrasives for cutting and grinding, linishing, polishing and stock removal

• Hand, air and power tools• Bearings and power transmission products including drive

belts and pulleys, couplings and accessories

CAPABILITIES

• Wood PLC• ExxonMobil• McDermott• UGL

KEY CUSTOMERS

• Relay International• F. Reyher Nchfg GmbH & Co• Solid-Lock Fastening Systems BV• Lincoln Electric

KEY PARTNERS

• Bolts and fasteners for critical applications to exacting standards according to DIN, ISO, EN and AS standards

• Global network of fastening professionals for technical support and stock availability

• Unique fastening solutions to address demanding applications such as high load, high vibration etc.

• Highest level of traceability for all bolts, nuts, washers, screws and fasteners

DISCRIMINATORS


PRODUCTS

SERVICES


Integration





PRODUCTS

SERVICES




70

RF INDUSTRIESwww.rfiwireless.com.au

Raj BangarAccount ManagerRF Industries Pty Ltd46 Corporate Boulevard, Bayswater VIC 3153Tel: +61 3 9751 7531Email: [email protected]

• Purpose built 11000 sq. m Distribution centre in Sydney with multiple container docking & staging facility

• RFI Americas in Cleveland Ohio servicing the Americas market with a 16, 000 sq ft (1490 sqm) facility

• RFI South Australia Facility features a 1, 000 sqm high grade manufacturing and R&D facility

• In 2010, RFI opened an office in Oxford UK to service European and Middle Eastern markets

• Surface mount technology for lead-free printed circuit board (PCB) assembly

• The latest antenna and RF design and drafting modelling packages

• An anechoic chamber with high power and PIM test environments

• M2M and Internet of Things Maxon solutions

CAPABILITIES

• Codan• BAE Systems• Thales• Telstra

KEY CUSTOMERS

• AS/NZS 9001:2015• 2016 Victorian Manufacturing Hall of Fame


• Commscope• Panduit• 3M• BYD

KEY PARTNERS

• World Class Engineering and R&D Team with 80 strong engineering team located in Victoria and South Australia

• Design, Manufacture & Test - Antenna Eng., Software Eng., Active RF & Digital Electronic Eng.

• Design, manufacture, test and deploy - Systems engineering• Delivered 1500+ DAS systems to carriers & building

contractors, multi-story office buildings & hospitals.

• Delivered tunnel re-broadcasting systems for Sydney’s M4&M5 Sydney Harbour, the Clem7, Melbourne’s CityLink etc

• Design, Procure and install smart energy solutions. Eg Stion Solar solution on Edward St Bldg, Brisbane.

• Deployed Govt Radio Networks all around Australia in partnership with Motorola Solutions & Telstra.

DISCRIMINATORS

RMIT UNIVERSITYwww.rmit.edu.au/defence

Quin ChangSector Manager Defence IndustryRoyal Melbourne Institute of TechnologyGPO Box 2476, Melbourne VIC 3004Tel: +61 3 9925 4064Email: [email protected]

• Multifunctional materials and advanced manufacturing including composites technologies

• Trans-disciplinary design and virtual prototyping including life cycle analysis

• Trusted autonomy and automation including artificial intelligence and human-machine interfaces

• Human performance, protection & human-machine interaction• Transport, infrastructure, power and energy including logistics

• Space situational awareness, satellite positioning and navigation and space technology

• Surveillance, sensor, information & communication technologies including quantum technologies and data analytics

• Defence workforce education, training & development including pilot training and flight simulation

CAPABILITIES

• DASA, CASG, Thales, RUAG, BAE Systems• DST Group, DMTC• US agencies ONR, AFRL• Boeing, BAE Systems, Thales, DefendTex

KEY CUSTOMERS

• Outstanding Leadership in Training Award 2018• Asian Freight Logistics/Supply Chain Award 2015• Aus top rank for Aerospace Engineering research


• DST Group• Defence Materials Technology Centre (DMTC)• Defence Primes: Boeing and BAE Systems• Defence SME: DefendTex

KEY PARTNERS

• The Sir Lawrence Wackett Centre – a national leader in aerospace and defence related research and teaching

• Extensive facilities for research and testing e.g the Advanced Manufacturing Precinct & a Flight Dynamics Facility

• Focus on applied rather than basic research• Non-destructive evaluations and Structural Health Monitoring

(SHM)

• Culture of industry interaction with Defence Primes and SMEs• Long history with Defence education and training e.g

delivering design & airworthiness programs & skills upgrading• Strong record of successful DST and DMTC projects e.g

developing autonomous systems for complex environments• Close proximity to research and industry partners including

those located at Fishermans Bend technology precinct

DISCRIMINATORS


PRODUCTS

SERVICES



Integration





PRODUCTS

SERVICES


Autonomous Systems



Information Systems






71

RONSON GEARSwww.ronsongears.com.au

Gavin NewSales & MarketingRonson Gears18 Teton Court, Highett VIC 3190Tel: +61 3 9276 8900Email: [email protected]

• CNC gear cutting of spur and helical gears• CNC gear grinding of spur and helical gears• CNC gear metrology• CNC rack milling• Bevel gear cutting

• Sub assemblies• Complete in house machining capability (turning, milling

& grinding)• Automated CNC gear cutting for production runs

CAPABILITIES

• BAE Systems• Marand Precision Engineering• Ferra Engineering• Boeing Defence (2nd Tier)

KEY CUSTOMERS

• AS 9100D• ISO9001:2015• BAE Systems approved supplier• Significant Achievement Award 2013


• American Gear Manufacturers Association• AIDN• Eurotrans (Europe’s gear association)• Team Defence Australia

KEY PARTNERS

• Highly innovative, high end and high value gear manufacturer• Australia’s first AS9100C accredited gear manufacturer• Proven track record into defence programs• 60+ years experience in the gearing industry

• Internationally connected: Members of the American Gear Manufacturers Association and Eurotrans, Europe’s gear association

• Ability to manufacture to high quality standards (AGMA 2000: 12+)

DISCRIMINATORS

RUAG AUSTRALIAwww.ruag.com.au

John TeagerVP RUAG Strategic Partnerships - AustralasiaRUAG Australia Pty Ltd836 Mountain Highway, Bayswater VIC 3153Tel: +61 (0) 419 030 824Email: [email protected]

• Component level Maintenance Repair and Overhaul• Precision Manufacturing of complex components at tight

tolerance levels• Managed Maintenance Repair and Overhaul• Metal Surface Treatment and Finishing, including Paint and

Prime, with Nadcap and multiple global prime approvals

• World leading Additive Repair Technologies and Manufacture• Nadcap approved Non-Destructive Testing• Engineering Services for design, development, implementation

& certification of repair schemes and test equipment• Supply Chain Management for spares

CAPABILITIES

• Royal Australian Air Force• Royal Malaysian Air Force• Royal Australian Navy• United Technologies Aerospace Systems

KEY CUSTOMERS

• Nadcap Chemical Processing, NDT & Shot Peen• DGTA AMO and AEO• AS9100C, ISO 9001:2000• CASA Approved AMO under CASR Pt145


• Honeywell• Parker• Eaton• UTAS

KEY PARTNERS

• Full ITAR approved staff and processes• Involved in JSF Manufacture since 2004• Long term contracts for MRO with ADF, proven track record

leading to higher reliability and increased availability• World leader in Additive Manufacturing with approved Repair

Technology capability• Experienced, highly qualified staff across multiple sites

Australia sites and support within entire RUAG Group

• Highly Accredited with Nadcap for Non-Destructive Testing, Chemical Processing & Shot Peen, ISO 9001:2000, AS9100C

• SCIP program participant• ‘One Stop Shop’ able to provide turn-key solutions due to wide

range of capabilities in-house

DISCRIMINATORS


PRODUCTS

SERVICES


Manufacturing / Fabrication / Assembly AEROSPACE CAPABILITY AREAS

PRODUCTS

SERVICES




Integration





72

R.V.S. INDUSTRIES PTY. LTD.www.rvsindustries.com.au

Jonathon SarahManaging DirectorR.V.S. Industries Pty Ltd3E 104 Johnston St, Fitzroy VIC 3065Tel: +61 3 9079 5950Email: [email protected]

• Energy beam power system 10KW to 45, 000MW continuously rated, rapid response

• Energy beam power system: space launch energy, sail deep space energy, hyper-sonic supply chain energy

CAPABILITIES

• Commercial in Confidence

KEY CUSTOMERS

• Commercial in Confidence

KEY PARTNERS

• RVSI 45, 000MW (Aust.) 24/7/365 rapid response defensive energy beam power system

• RVSI power systems enable energy beam economic rapidly repeatable low cost large payload space launches

• RVSI power systems enable energy beam economic rapidly repeatable low cost large hyper-sonic payload launches

• RVSI energy technology alters strategy• RVSI (Exclusive Patents)

DISCRIMINATORS

SAAB AUSTRALIAwww.saab.com.au

Nathan ParsonsHead of Industry EngagementSaab Australia Pty Ltd15-29 Bank Street, South Melbourne VIC 3205Tel: +61 3 9697 3700Email: [email protected]

• Specialist defence and security systems integrator• Australia’s leading combat systems integrator• Development and management of security and protection

systems• Provision and integration of vehicle electronics, armoured

vehicle fire control and electronic warfare systems

• Centre of excellence in autonomous vehicles• Ballistic protection and camouflage systems• Australia’s leading Ground Based Air and Missile Defence

integrator• Deployable Health Capability provider

CAPABILITIES

• Royal Australian Navy• Royal Australian Air Force• Australian Army• Key Defence Prime Systems Integrators

KEY CUSTOMERS

• AS/NZS ISO 9001:2008• Defence Employer of Choice Award 2015• DMO / ADM Award for Excellence in PM 2013


• Global reach via Saab AB• The Saab Global Supply Chain• BAE Systems Australia as Prime for Land 400• Numerous local Australian sub-contractors

KEY PARTNERS

• Leader in the development and integration of command and control systems

• Proven track record in achieving complex systems integration• The leading provider of Combat Management Systems to the

RAN

• The integration of command and control and communications with in service weapon systems

• In service Support of defence C2 and software systems• Provides and supports Australian Army’s Ground Based Air

Defence (GBAD) and C-RAM capabilities

DISCRIMINATORS


PRODUCTS

SERVICES


Integration






PRODUCTS

SERVICES



Integration



73

SCIENTIFIC MANAGEMENT ASSOCIATES (OPERATIONS) PTY LTDwww.sma.com.auJohn RobertsonGeneral ManagerScientific Management Associates (Operations) Pty Ltd19 Shierlaw Avenue, Canterbury VIC 3126Tel: +61 3 9816 5302Email: [email protected]

• Full suite of Integrated Logistics Support services and training• Logistics Engineering, including FMECA, LORA, RCM• Logistic Support Analysis• Learning, Training and Development solution activities

• Training Needs Analysis, Design, Development and Delivery• Training Media Analysis and Training Aid Development,

including simple to complex solutions• Technical documentation management, authoring and illustrating

CAPABILITIES

• Australian Defence Force• Capability Acquisition and Sustainment Group• Defence Primes• Defence System/Equipment Suppliers

KEY CUSTOMERS

• AS/NZS 9001:2015• Registered Training Organisation (RTO)• Defence Industrial Security Program• Defence Recognised Supplier


• Over 30 years experience with major Defence and industrial projects, using world’s best practices

• Ability to provide innovative, independent total ILS solutions tailored to client needs

• Proven ability to integrate into prime contractor organisations• Significant knowledge of engineering and design processes

which underpin support package development

• Excellent reputation for successful completion of major projects within budget and on time

• Successful in exporting ILS capabilities to European and Asian countries

• Quality Accredited to International Standard ISO 9001• Registered Training Organisation with the Australian National

Training Authority

DISCRIMINATORS

SENTIENT VISION SYSTEMSwww.sentientvision.com

Stewart DayGeneral ManagerSentient Vision Systems Pty Ltd85 Salmon Street, Port Melbourne VIC 3207Tel: +61 3 9646 3331Email: [email protected]

• Kestrel and ViDAR are capability multipliers greatly increasing situational awareness

• ViDAR operates an an optical radar increasing maritime search coverage over 80 times

• Kestrel automatically detects small objects over land or sea in full motion video

• Automatically detect & cue operators to small, hard-to-see objects such as vehicles, people & small boats

• Enhance maritime search & rescue by detecting people in the water or life rafts in tough conditions

• Reliably detect objects 24x7 - processing every pixel, every frame, hour after hour

CAPABILITIES

• ADF - ScanEagle, Shadow, Heron, Wasp• Cobham - AMSA• US Navy NAVAIR MQ-8 Fire Scout• Canadian Forces

KEY CUSTOMERS

• ISO 9001• DST Group CTD Program• Commercialisation Australia, PIC-IP• Maritime Australia Civil Innovation Award 2013


• AeroVironment• Boeing Insitu• Wescam• FLIR

KEY PARTNERS

• Increase maritime search coverage 80 times over existing EO/IR sensors with ViDAR

• Easily added to manned aircraft, helicopters and unmanned aircraft

• Detect objects with little/no electronic signature• Easily integrated into existing mission systems• Operates in challenging terrains and environmental conditions

DISCRIMINATORS


PRODUCTS

SERVICES




PRODUCTS

SERVICES

Autonomous Systems

Information Systems

74

SIEMENS LTDwww.siemens.au/defence

Andrew SealHead of Defence and MaritimeSiemens Ltd885 Mountain Highway, Bayswater VIC 3153Tel: +61 (0) 429 384 521Email: [email protected]

• Sub-system system integration validation and virtual commissioning through simulation

• Functional requirements and specifications validation through Simulation

• PLM suite for Mechanical Design Model Based Definition for Aerospace & Defense enabling the complete digital twin

• Aero-Engine design tools for Aircraft Engines• Composite design, analysis and maufacturing solutions• Engineering data and process management solutions• BOM and configuration management solutions• SINUMERIK CNC system machine tools technology for precise

machining

CAPABILITIES

• BAE Systems• Lockheed Martin• SpaceX• US DoD

KEY CUSTOMERS

• Airbus• Boeing

KEY PARTNERS

• Siemens Airbus colaboration on research and development of aviation hybrid electric propulsion systems

• Provider of PLM design suite for JSF programme

• Design and simulation tools provider to NASA’s Mars Program• Provider to SpaceX of their managed development

environment

DISCRIMINATORS

SIMUSERVwww.simuserv.com

Gerd DiegelmannManaging DirectorSimuserv Pty LtdLevel 1, 123 Camberwell Road, Hawthorn East VIC 3123Tel: +61 3 9889 5615Email: [email protected]

• Supply & support a scalable portfolio of realistic simulation solutions from the “SIMULIA Abaqus” product suite

• Multiphysics solutions for insight into challenging engineering problems & life cycle management solutions

• Consulting services in the field of Computer Aided Engineering (CAE) & structural Finite Element Analysis (FEA)

• Solving unusual & complex problems, successful delivery on projects that were previously considered extreme

• Highly non-linear FEA - Geometric & contact nonlinearities, material non-linearities, solution dependent loading

• Customised non linear material models - Explosion, Plasticity, Creep & Progressive Failure

• Simulation software development & customisation - Pre/ Post customisations & solver level customisations

• Planning, training & management of analysis projects & R&D programmes

CAPABILITIES

• Australian Defence Force Academy (ADFA)• ANSTO and CSIRO• DST Group• CASG

KEY CUSTOMERS

• Dassault Systemes

KEY PARTNERS

• Established in 2002, Australian & New Zealand partner for the Dassault Systemes SIMULIA brand and Abaqus solution

• All our staff are highly qualified totalling over 80 years of technical experience in simulation consulting

• Capable of small consulting projects through to management of large on-site programmes involving teams of analysts

• We understand simulation is most effective when considered as an integral part of the design & problem resolution

• Provide multi-dimensional solutions with software purchase or leasing combined with training and/or consulting

• Preferred FEA solution in the Defence, Aerospace and Nuclear markets in Australia

DISCRIMINATORS


PRODUCTS

SERVICES


Autonomous Systems



Information Systems

Integration






PRODUCTS

SERVICES






75

SRX GLOBALwww.srxglobal.com.au

Sam PapadopoulosBusiness Development ManagerSrxglobal Australia Pty Ltd10 Kitchen Road, Dandenong South VIC 3175Tel: +61 3 9212 4222Email: [email protected]

• Electronic Contract Manufacture• Electronic/Electrical Assembler• Manufacture directly to Tier 1 Customers

CAPABILITIES

• Thales• Lockheed Martin• Northrop Grumman• Resmed

KEY CUSTOMERS

• Vic Large Manufacturing Awards Winner 2015• ISO 9001, ISO13485, ISO14000• Manufacture to IPC Class 1, 2 or 3


• Planet Innovation• Hydrix• Procept• LX Group

KEY PARTNERS

• SRX is the largest Electronic Manufacture In Australasia and Australian owned

• Providing PCBA Manufacturing and Assembly• Provide Box Built product

• Have access to low country sourcing• Manufacturing facilities In Melbourne Australia and

Johor Bahru in Malaysia• ITAR trained personnel

DISCRIMINATORS

STOWE AUSTRALIAwww.stoweaustralia.com.au

Jason BridgemanClient ServicesStowe Australia67-69 Buckhurst Street, South Melbourne VIC 3205Tel: +61 3 9695 2333Email: [email protected]

• Electrical and Communictaions Contractors /Maintenance since 1910

• Specialist Maintenance Services for HV, LV and communication with 24 hour emergency help desk

• Large in-house resource base is multi-disciplined to provide integrated service of electrical and data systems

• Ability to deliver national roll-out services throughout Australia for Electrical and Communication services

• Energy Management services and solution• Value engineering through design and specification critique

and materials selection

CAPABILITIES

• Thales Australia• Air Services Australia• Honeywell Australia• Laing O’Rourke

KEY CUSTOMERS

• Quality Assurance ISO 9001:2008• OH&SMS AS/ANS4801:2001• Environmental ISO14001:2004


• 100 years of continual service to the electrical and communication industry

• Privately owned electrical and communication contracting organisation with 1, 400 employees

• To create long term relationship with customers, suppliers and most importantly its employees

• Building and maintain a satisfied customer base through our quality service with trust and respect

• Stowe Australia operates from 15 offices on the eastern seaboard with Defence cleared staff

DISCRIMINATORS


PRODUCTS

SERVICES



Safety Systems & Testing AEROSPACE CAPABILITY AREAS

PRODUCTS

SERVICES



Information Systems

Integration




76

STRATEGIC CONNECTIONS GROUPwww.strategicconnectionsgroup.com

Alan BurnsManaging DirectorStrategic Connections Group Pty Ltd50 Upper Heidelberg Road, Ivanhoe VIC 3079Tel: +61 (0) 423 783 434Email: [email protected]

• Infrastructure Projects, construction & design management• Document development, control and configuration

management• Management of change• Product/System development management

• QMS systems, human factors, risk consulting• Supply chain & project procurement services• Market analysis & supply chain strategy• Integrated logistics support

CAPABILITIES

• Downer• Yarra Trams (Kelolis Downer)• DEDJTR• Metro Trains (MTM)

KEY CUSTOMERS

• ISO 9001:2015• AVETTA Certified


• TRAMOBUS• Tricycle Developments• Institute of Railway Technology

KEY PARTNERS

• Advanced relationships with internal advanced manufacturers• Strong relationships with international OEM parts suppliers• In-depth knowledge of logistics streams both domestically and

internationally• Over 40 years experience in heavy transport engineering services

• Proven track record in delivery of complex transport engineering management, refurbishment programs

• Defence lead with 20+ years Air Force logistics and supply chain experience

DISCRIMINATORS

SWINBURNE UNIVERSITY OF TECHNOLOGYwww.swinburne.edu.au

James DavernBusiness Development ManagerSwinburne University of TechnologyJohn Street, Hawthorn VIC 3122Tel: +61 3 9214 5374Email: [email protected]

• Quantum technology: computing; measurement and sensors; communications and information networks

• Cybersecurity: cross-layer key management; multi-factor authentication; cloud security; adaptive cyber defence

• AI: agent-agent intelligent negotiation for collaborative learning, adaptive logistics and resource optimisation

• Data to Decisions: data collection, preparation and curation, analytics, visualisation for machine learning

• Advanced materials (e.g. graphene, hybrid materials) and manufacturing processes for aerospace applications

• Industry 4.0 demonstration factory (scale) with design, visualisation, and additive manufacturing capabilities

• Aviation human factors specialists, including training optimisation for operators and maintainers

CAPABILITIES

• Australian Department of Defence• US Department of Defence• Australian Defence Primes• Australian Defence Industry SMEs

KEY CUSTOMERS

• Top 2.1%, THE World University Rankings 2017• Top 2.2%, QS World University Rankings 2017• Top 2%, Academic Ranking of World Universities• Top 300 in Physical Sciences - THE


• BAE Systems Australia• Boeing Defence Australia• Siemens Australia• Defence Materials Technology Centre

KEY PARTNERS

• Ability to assemble multi-disciplinary team of globally recognised experts in short time period

• Proven excellent performance with Defence projects• Culture of active engagement with Defence and the Defence

Industry to meet challenges• Both higher education and vocational / TAFE education and

training capabilities to meet entire span of workforce

• Nation leading Industry 4.0 research and education capabilities (Siemens Test Lab)

• Experience in combined data analytics, AI, IoT and cybersecurity research teams for whole-of-systems outcomes

• Leading edge materials testing facilities (including NDT and high velocity impact testing)

DISCRIMINATORS


PRODUCTS

SERVICES


Integration





PRODUCTS

SERVICES


Autonomous Systems



Information Systems

Integration





77

SYPAQ SYSTEMS PTY LTDwww.sypaq.com.au

Amanda HoltCEOSYPAQ Systems Pty LtdLevel 5, 441 St Kilda Road, Melbourne VIC 3004Tel: +61 3 9867 2565Email: [email protected]

• Founded in 1992, Australian owned, operates throughout Australia and Asia with around 200 employees

• Advanced professional consulting, systems integration and support services in the Defence and Aerospace domains

• C4ISREW systems integration services• Project & Program Management; Capability Definition

Development, Acquisition and Sustainment Logistics

• Platform, Systems, Communications, Electrical & Electronics Engineering

• Software Development & Integration; Verification and Validation; Test Program Management and Execution

• ICT System Architecture/Design; Managed Application Support Services; Business Analysis

• Next Generation Autonomous Systems

CAPABILITIES

• Department of Defence (CASG, Navy, Army & RAAF)• CIOG, AGIO, DSTG• Industry - Lurssen, BAe Systems, L3• Defence Innovation Hub

KEY CUSTOMERS

• ISO 9001:2015 Certified by Lloyds Registry• Member, Defence Industrial Security Program


• UTC Aerospace Systems• Arcturus UAV• Sirius

KEY PARTNERS

• Australian representative for UTC Aerospace Systems (UTAS)• Proven methods and procedures compliant with ISO, USA and

NATO Standards• Supplier of the Arcturus JUMP20 UAS capability - Tier II, High

Performance, High Payload, Versatile, VTOL MTUAS• Full motion video (stored & live) and still image (satellite)

• SAR, SIGINT, HUMINT, ELINT, Track Data, etc• Sensor and Platform Agnostic• C4ISREW systems currently deployed with UK forces• Leading innovator and provider of Earned Value Management

and Independent Boards of Review

DISCRIMINATORS

TBHwww.tbh.com.au

Jiong ZhuTracey Brunstrom & Hammond Pty LtdLevel 17, 500 Collins Street, Melbourne VIC 3000Tel: +61 3 8692 9800Email: [email protected]

• Project planning, scheduling and controls• Earned value management• Baseline management• Cost management

• Schedule risk analysis• P3M (project, program and portfolio management)• Claims/Dispute resolution and expert witness• Risk management

CAPABILITIES

• Telstra (JP2047)• KPMG/CASG• Fujitsu/CIOG• Aurecon/E&IG

KEY CUSTOMERS

• ISO 9001:2008• AS 4801:2001• ISO 14001:2004• International Project Excellence Award 2013


• Optus• Lockheed Martin• Nova Systems• Mace

KEY PARTNERS

• Founded in 1965• Australian owned with export to Asia, Europe and UAE• SME status with 140 Australian practitioners (>90% full time

salary positions)• Locations: Melbourne, Adelaide, Canberra, Brisbane, Townsville,

Perth and Sydney

• Highly regarded experience in planning and scheduling with a local and international presence

• Cross-regional collaboration in servicing all major industries• >90% repeat business from satisfied customers

DISCRIMINATORS


PRODUCTS

SERVICES


Autonomous Systems



Information Systems

Integration






PRODUCTS

SERVICES


78

TEXTRON SYSTEMS AUSTRALIAwww.textronsystems.com.au

Jack KormasManaging DirectorTextron Systems Australia Pty LtdUnit 1, 585 Blackburn Road, Notting Hill VIC 3168Tel: +61 3 9518 7300Email: [email protected]

• Engineering Design of the proven Aerosonde UAS platform ranging from mechanical, electrical, propulsion, avionics

• Manufacturing of the Aerosonde UAS platform• Systems integration of customer payloads and ground based

datalinks for communication, video, EW, SIGINT• Worldwide UAS Flight Operations

• UAS Pilot and Maintainer Trainer on the Textron Shadow 200 TUAS and other platforms

• Flight Simulator maintenance and Maintenance Crew training• Commercial Drone Training on various multirotor platforms -

CASA Licensed and Approved.

CAPABILITIES

• Textron Systems• Commonwealth of Australia• US Forces• Australian Army

KEY CUSTOMERS

• AS9100 and ISO 9001• Manufacture to IPC610/620 Class 3• Member, Defence Industrial Security Program• 2013 Governor of Victoria Export Award, Manufac


• Textron Systems• Textron Inc.• TRU Simulation + Training• Defence Innovation Hub

KEY PARTNERS

• Designing, manufacturing, operating and supporting one of the world’s most reliable and trusted multi-mission unmanned aircraft.

• Aerosonde systems have more than 300, 000 operational hours in some of the world’s most harshest environments

• Long range, Long Endurance, Beyond Visual Line of Sight unmanned aircraft

• UAS can carry several payloads/sensors in a single flight, returning a richer, more meaningful data yield in every hour flown.

• Our experience brings our military, civil and commercial customers a decisive advantage

• Additional services include flight simulator maintenance and maintainer training for manned and unmanned aviation

DISCRIMINATORS

THE CITADEL GROUP LIMITEDhttps://citadelgroup.com.au

Tim HelyDefence Account ManagerThe Citadel Group Limited459 Collins Street, Melbourne VIC 3000Tel: +61 (0) 476 180 314Email: [email protected]

• Procurement Methodologies & Contracting Options & Tender Development

• Program & Product Management Services & Support• Project Management Services & Support

• Project Risk & Issue Management• Strategic Business Advice• Transition Management

CAPABILITIES

• ISO 9001:2015• DISP Membership• ISO 22310


• MicroSoft• Pexip• MicroFocus

KEY PARTNERS


PRODUCTS

SERVICES


Autonomous Systems



Integration




PRODUCTS

SERVICES

Information Systems

Integration


79

TOWERS GROUP PTY LTDwww.towersgroup.com.au

Ryan OswinDirectorTowers Group Pty LtdOffice 34/68 - 72 York Street, South Melbourne VIC 3205Tel: +61 (0) 421 846 787Email: [email protected]

• Systems Engineering• Project Management and Project Management Support• Science and Technology Support• Research and Development

• Materials Science• Capability Development• Mechanical Engineering• Electrical Engineering

CAPABILITIES

• Capability and Acquisition Sustainment Group• Defence Science and Technology Group• Major Service Providers (Downer, KBR)• AGIS Group Pty Ltd

KEY CUSTOMERS

• Current domain knowledge and valuable experience resulting from previous full-time ADF service on operations

• Towers is a Defence Industry Security Program (DISP) member and sponsors all staff Australian Security Clearances

• As a Small to Medium Enterprise (SME), Towers is lean and deliver best value for money for its clients

• Towers maintains a commitment to ongoing professional development of staff

• Towers is a member of multiple professional bodies and affiliations to remain at the forefront of best practice

• Towers is a member of the Defence Services Support, DST Group ReSET and Defence Simulation Standing Offer Panels

• The Towers Team comprises of highly qualified and experience experts in their relevant fields

DISCRIMINATORS

TRAKKA SYSTEMStrakkasystems.com

Dan KiehlChief Operating OfficerTrakka Corp Pty. Ltd.23 Kilpa Road, Moorabbin VIC 3189Tel: +61 3 9553 3000Email: [email protected]

• Australian and Swedish based manufacturing• Australian manufacturing facility AS9100C and

ISO9001certified

• In house R&D and engineering teams for design, hardware, software development and implementation

• Ability to customise sensors rapidly to customers requirements

CAPABILITIES

• Searchlight: Superior uniform beam, superb clarity, Internal multi-spectral filter for multi-mission capability

• Searchlight: Aerodynamic design for low parasitic drag, light weight, lower power consumption

• Searchlight: highest MTBF in industry, NVG compliant, tested to DO-160 & DO-178 and Mil-STD-810 compliant

• Searchlight: Ease of installation & integration with no additional electronics for slaving to other payloads

• Camera: manufacturer of configurable 200mm, 300mm, 400mm dia. and single LRU Gyro-Stabilised Electro Optical Camera

• Camera: multi-sensors include;HD TV, Spotter & Infrared camera with continuous zoom optics and MISB compliant video

• Camera: can be fitted with Laser Range Finder, Laser Illuminator, Laser Pointer, IMU/INS, Auto Object Tracking

• Camera: features image blending, Localized contrast enhancement, Geo-location, Moving target indication & Moving map

DISCRIMINATORS


PRODUCTS

SERVICES



Integration





PRODUCTS

SERVICES



Integration



80

TRAX PRINTwww.traxprint.com

Robert AblingerCTOTrax Print Pty Ltd700 Bourke Street, Docklands VIC 3008Tel: +61 (0) 411 544 491Email: [email protected]

• Document verification and protection• Secure login processes• Identification protection

• Counterfeit Part detection• Secure two factor authentication process for internal systems• Secure website login portal development

CAPABILITIES

• KPMG• Government• Banks

KEY CUSTOMERS

• Global RegTech 100 company


• Patented solutions• Military grade encryption

DISCRIMINATORS

TVN ON-COUNTRY PTY LTDwww.tvnon-country.com.au

Jonathon WhelanContracts & Procurement ManagerTVN On-Country Pty Ltd573 Spurrway Drive, West Albury NSW 2640Tel: +61 3 5744 0179Email: [email protected]

• Construction services (e.g. buildings, Infrastructure, demolition) including design

• Contaminated material management & removal

• Power distribution systems (e.g. co-generation, emergency/ temporary power).

• Procurement services

CAPABILITIES

• Department of Defence• Serco• Visy• Mars

KEY CUSTOMERS

• ISO 9001:2015 Quality Management System• ISO 14001:2015 Environmental Management System• AS/NZS 4801:2001 Occupational Health & Safety M• WHS Accreditation (audit & assessment underway)


• Siemens• David Power

KEY PARTNERS

• Department of Defence Experience (the team has worked on projects from $250k up to $350m)

• Indigenous Owned / Supply Nation Approved Organisation

• Extensive experience across a variety of contract arrangements (e.g. D&C, construct only, Managing Contractor)

• 24/7 customer support in case of unforeseen events.• National coverage

DISCRIMINATORS


PRODUCTS

SERVICES

Information Systems

Integration




PRODUCTS

SERVICES



81

UNIFORM SAFETY SIGNSwww.uniformsafetysigns.com

Terry McMurdoSafety Specialist/DirectorUniform Signs Pty Ltd3-5 Amcor Way, Campbellfield VIC 3061Tel: +61 3 9357 9820Email: [email protected]

• In-house design & manufacture all types of signage, labels, stencils, engraving, decals, vehicle sticker sets

• Digital Printing, UV Printing, Screen Printing, Signs with UV Laminate or Anti-Graffiti Laminate

• Material: Aluminium, Stainless Steel, Colourbond, Polypropylene, Self Adhesive, Alucabond, PVC, Avery Reflective etc.

• On-site Signage surveys• Installation Service• National Representation

CAPABILITIES

• Defence

KEY CUSTOMERS

• BHP Metals• Avery Dennison Reflective

KEY PARTNERS

• Flexible signage solutions to cater for projects from start through to completion

• Fully integrated ERP platform• 26+ plus years industry experience

• Australian owned and operated• Average of 98.5% DIFOT• Continuous improvement management style

DISCRIMINATORS

WALLABY BATTERIESwww.wallaby.com.au

Rupert GallandGeneral ManagerBRB Enterprises Pty Ltd25 / 73 Queens Road, Melbourne VIC 3004Tel: +61 (0) 413 580 372Email: [email protected]

• Developers of High Quality Alkaline, Lithium, and Rechargeable Batteries

• Can Manufacture 280 Million Pieces/Month of Alkaline Battery• Can Manufacture 1 Million Pieces/Month of Lithium AA and AAA• Current Sizes Available Include – AA, AAA, C, D, 9v, 23A, 27A,

LR1, CR2016, CR2025, CR2032. In Development – 18650

• More Sizes Available Upon Request• Flexible Manufacturing and Product Design• Large Stock On Hand In Melbourne• We Meet Your Needs

CAPABILITIES

• Wallaby Batteries Is A New Brand• Public Sector - Ebay, Amazon, Website

KEY CUSTOMERS

• ISO 9001:2015/GB/Y 19001-2016• ISO 14001:2015


• Parent Company – BRB Enterprises Pty Ltd

KEY PARTNERS

• Australian Owned and Operated Company• Batteries Made to Highest Standard• High Quality Batteries at Affordable Prices

• Trademarked Wallaby Brand has Australian Theme• Excellent Service and Delivery Record in the Public Sector• Large Stock On Hand In Melbourne for Immediate Delivery

DISCRIMINATORS


PRODUCTS

SERVICES




PRODUCTS

SERVICES


82

WEST SALE AIRPORTwww.wellington.vic.gov.au/Lists/Council-Facilities/West-Sale-Airport

Paul JohnsonManager Business DevelopmentWellington Shire CouncilJackson Drive, Fulham VIC 3851Tel: +61 3 5142 3027Email: [email protected]

• West Sale Airport is owned and operated by Wellington Shire Council and ready for expansion

• Proudly has a strong alliance with military pilot training• Home to a number of small to medium aviation RMO

enterprises• High quality aviation infrastructure including new 1,800m

asphalt runway and two large aprons

• Fuel facilities catering for large regional operations - Jet and Avgas (20,000lts each)

• Aerodrome lighting (PAL and LIRL) and Precision Approach Path Indicator (PAPI)

• Terminal building and pilot briefing facilities• Class 2 compass swing area

CAPABILITIES

• Royal Australian Air Force• Repair, Maintenance and Overhaul sector• Aeromedical, oil and gas industry • General and recreational aviators

KEY CUSTOMERS

• CASA Registered Aerodrome


• Victorian State Government• Australian Airports Association• Local aviation businesses

KEY PARTNERS

• Uncongested, controlled airspace when activated by RAAF Base East Sale ATC

• 95,000m2 of land suitable for a range of aviation related developments

• 15-20 minutes from Melbourne by air, two hours by road • Lease terms up to 50 years• Proven record of liaison and advocacy facilitating growth in

defence aviation training

• Close proximity to offshore oil and gas platforms• CASA accredited LAME training delivered on site• Curfew free with shovel ready opportunities ready for the

commercial and industrial precincts

DISCRIMINATORS

YTEKwww.ytek.com.au

Richard YanieriManaging DirectorYTEK Pty LtdLevel 1, 231B High Street, Ashburton VIC 3147Tel: +61 3 9882 2052Email: [email protected]

• Modelling and Simulation (M&S) for Decision Support and Training

• Automated training assessment and debriefing tool development / Analytics - ExTrace

• Interoperability and tactical data link technology expertize and products

• Software development for advanced engineering applications• Defence simulation environment research and experimentation

support• Use of High Performance Computing (HPC) for engineering

simulation and analysis (Including CFD and FEM)

CAPABILITIES

• DST Group• Army

KEY CUSTOMERS

• CSIRO SIEF STEM+ Grant 2016• Victorian Gov Technology Innovation Grant 2015• ARC Linkage Multi Party Grant 2012• DISP accredited


• MASA Group (France) - SWORD / DirectAI• DIGINEXT (France) - DirectCGF / TDL• PITCH Technologies (Sweden) - HLA / DIS• Cray Australia - HPC Systems

KEY PARTNERS

• Specialist, niche systems integrator with expertise in M&S and T, and Computational Intelligence (CI) / Analytics

• Specialist knowledge and expertize in automated AAR / debriefing technology using Computational Intelligence

• Independent R&D house• 24 Yr Defence experience track record• DISP accredited

DISCRIMINATORS


PRODUCTS

SERVICES




PRODUCTS

SERVICES


Information Systems

Integration



NH-90 CABLE HARNESSESCable harnesses for the NH-90 were manufactured and supplied by Cablex, Bentleigh East, Victoria.

CreditsImages thanks to: Department of Defence, A.W. Bell, Textron Systems Australia

Document Authors & Contributors: Charlotte Morris, Ben Durrant

Sponsors: State Government of Victoria, Australian Defence Alliance (Vic)

84

Victorian Defence Alliance - Aerospace Membership as at February 2019

A. Noble & Son LtdAB Phillips Pty LtdAcacia FoundryACS AustraliaAerospace & Specialist ComponentsAerospace Australia LimitedAerospace MaterialsAgility Logistics Pty Ltd AirbusAlbins Performance TransmissionsAll Sat CommunicationsAltair EngineeringAlternative EngineeringAmaero EngineeringAME SystemsAmiga Engineering Pty LtdAMOG ConsultingAmphenol Australia Pty LtdANCAAnchoring Rope & RiggingANSTOAnywise ConsultingANZ Banking Group LtdAOSApplied Automation and EngineeringApplied CCMApplied Fasteners & ToolingAPV Engineering & Testing Services Pty LtdAPV Safety Products (Int) Pty LtdAquila Engineering Pty LtdAssociated Foreign ExchangeATLINATTARAurega GroupAusearthAustbrokers Countrywide Insurance BrokersAustest LaboratoriesAustralian Aerospace EngineeringAustralian Precision TechnologiesAustralian Surface TreatmentsAustralian Welding SolutionsAuTCAvalon AirportAviallAvionics 2000AW Bell

BAE Systems AustraliaBaron RubberBartlett ManufacturingBeak Engineering Bid WriteBlack Stump TechnologiesBMP EngineeringBMT Design & TechnologyBrace TechnologiesBralco Metals Australia Pty LtdBredo Mators Pty LtdBrenco AerospaceBriggs AerospaceBunjil EnergyC3X Pty LtdC4 Engineering Pty LtdCablexCGB Precision ProductsChemring AustraliaCider House ICTCity of Greater GeelongCNC Design Codarra Advanced SystemsCommitted Solar SolutionsCommunications Connect Ltd. Pty.Communications Design and Management Pty LimitedCompilatrix Research CorporationCornell DesignCrowe Horwath (Aust) Pty LtdCRP Industries Pty LtdCynch Securityd-twinDaronmont TechnologiesDB SchenkerDeakin UniversityDefence Science InstituteDEK CorporationDelta Gamma RF ExpertDFP RecruitmentDirect Edge ManufacturingDirected TechnologiesDMTCDraeger Australia Pty. Ltd.DRSYSDurrant & Durrant ConsultingDVR Engineering Pty Ltd

EB FusionEnerSys Australia Pty Ltd Enterprising PartnershipsEnvirofluidEnviroRisk Management Pty LtdERGT AustraliaFibre-Tech SolutionsFisher’s (Latrobe Valley) Pty LtdFlexible DriveFlight Data SystemsFLIR Systems AustraliaFracht AustraliaFroude Hofmann AustraliaGeelong Defence AllianceGeoplexGMS CompositesGPSat Systems Australia Pty LtdGreyScan AustraliaGroundmaster EngineeringH&H Machine ToolsHardcat Hardchrome Engineering Pty LtdHardman Bros. Pty LtdHargo Engineering Pty LtdhdL GroupHenkel AustraliaHERE TechnologiesHeuch RefrigerationHofmann EngineeringHolmwood GroupHTA Aerospace & DefenseHydac Pty LtdHydrix Pty LtdIdeal LogisticsIndec Consulting Pty LtdInduction GroupInfosys PortlandInnovative Security & DataIntegra SystemsIntelligent Security Integration AustraliaInterchemInterlloyInternational Consultants CentreInvenioIon Systems Pty LtdiRubber Pty Ltd (Dalsouple rubber)

JVATKinexusKPMGL3 TechnologiesLa Trobe UniversityLatrobe City CouncilLatrobe City/Latrobe Regional AirportLeonardoLitra Australia Pty LtdLMATS Pty LtdLockheed MartinLogistic Engineering ServicesLogistic Solutions AustralasiaLovitt Technologies AustraliaMackay Consolidated Industries Pty LimitedMacro RecruitmentMagefekt Pty LtdMansi On RaymondMantra GroupMarandMarkerry IndustriesMatrix Applied Computing Pty LtdMemko Pty LtdMet OptixMetfastenersMicro Planning InternationalMilspec ManufacturingMomentum SystemsMoog AustraliaMotherson Elastomers Pty LimitedNelson Global Products AustraliaNexus Training SolutionsNezkot Precision Tooling & EngineeringNiksar Australia Pty LtdNorton ConsultantsNova SystemsNoventusNovonicsOcean SoftwareOpaque Media GroupOpen WeldingOpus International ConsultantsParadigm Press Pty LtdPennant AustralasiaPerform Zone

Phasor InnovationPHM TechnologyPilatus Defence Solutions Australia Pty LtdPitcher Partners Consulting Pty LtdPlattarPoint TradingPowerjump Technologies Australasia Pty LtdPPG AerospacePrecise Advanced Manufacturing GroupPriority ERP Pty LtdProgrammed Skilled Workforce Project Director InternationalProject PerformancePromandPWB AnchorQinetiQQuartek Pty LtdQuest SaleR.V.S. INDUSTRIES PTY. LTD.R&I Instrument & Gear (Aust) Pty LtdREALM - Solutions For The FutureRed Baron ALSERedstackRefuel InternationalRelay IndustrialRF IndustriesRisk Control ConsultingRMIT UniversityRMR Engineering P/LRonson GearsRPR Trades Pty LtdRPSRUAG AustraliaSAAB AustraliaSafemate AntislipSAGE AutomationSARASayfa GroupScientific Management Associates (Operations) Pty LtdSentient Vision SystemsSiemens LtdSilverback Cargo CareSimdikoff GroupSimuservSincore Engineering Pty Ltd

SkyfactureSouthern Cross ProtectionSouthern SpreadersSpiral Systems Pty LtdSpray Shop Supplies Pty LtdSRX Stowe AustraliaStrategic Connections GroupSurvival Systems International AustraliaSwagelok Eastern AustraliaSwinburne University of TechnologySyntholine ProductsSYPAQ SystemsSystra ScottListerTBHTCF ServicesTex Onsite Pty LtdTextron Systems AustraliaThales AustraliaThe Citadel Group Limited The Paynter CompanyTitomicTLR Contracting Towers Group Pty LtdTrakka Corp Pty LtdTrax Print Pty LtdTrimcast ProductsTVN On-Country Pty LtdUltra Vision LightingUniform Safety SignsUnion HydraulicsUTC Aerospace SystemsVativeVersalux Pty LtdVFVWallaby BatteriesWellington Shire CouncilWilliam Adams Pty LtdWindrose International Pty LtdXKGYTEK Pty Ltd

Back Cover: Hawk Lead-in FighterEngineering management support of the Hawk 127 aircraft from Royal Australian Air Force is conducted by BAE Systems Australia.

AUSTRALIANDEFENCEALLIANCE

+61 (03) 8658 5707 | E: [email protected] | victoriandefencealliances.org.au

Edition 2: February 2019

Documents

AUSTRALIAN DEFENCE ALLIANCE · 2021. 5. 3. · Victoria’s innovative world-class aerospace design, ... The Alliance has more than 255 member companies and these are listed at the