Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
CONCRETE
MD ProSupply Co.,Ltd 23/107 Moo 7, I Design Village Lumlukka Klong 3, Ladsayoy Lumlukka Pathumthani, Thailand 12150
T.0 2532 8122, Fax : 0 2902 0080 # 2181, website : www.mdprosupply.co.th
Automatic Compression Machine Meet ASTM C39; AASHTO T‐22
▶ 1500 and 2000 KN. Capacity
▶ Test 150 and 100 mm. cube or cylinder up to
320 x160 diameter
▶ Fully automatic test sequence with microprocessor
Control
▶ Automatic loading cycle
▶ On‐board memory for 9000 test result.
▶ Accuracy Class 1 (±1%) Meet Standard ASTM E4.,
DIN‐51220., EN ISO 7500‐1
▶ Automatic control of pace rate 0.5 to 30 kN/sec
▶ Selectable measuring force KN, lbs or kgf engineering
units.
▶ Rapid approach of platens.
▶ Graphic display with high resolution 240 x 64 pixel
with LCD Back light
▶ Real‐time Load and Compressive Strength
▶ Input Range 0‐20 mV, 0‐150 mV, 0‐500 mV, 0‐1 V,
0‐2.5 V, 0‐5 V
▶ SAFETYGUARDS, polycarbonate, with aluminium
frame
TECHNICAL
• Acquisition and data processing systemat 24 bit, effective resolution 22 bit.
• USB and RS 232 interface for transferdata during test or test results directlyto PC.(Via Download software)
• RJ45 for WIFI connection interface fortransfer data directly to PC.
• The two analogue‐digital channels acceptsensor, Transducer or Load cell.
• Print test result via LPT port directly.
• On board circuit protection for maximumload or setting point.
• WIFI data transfer system supplied completedown load Software compression test withvisualization of the Load/Time in real time
ODERING IMFORMATION
Model Description
MD815‐AT 1500 kN Auto‐Compression Machine for 220‐240 V, 50 Hz, 1 ph.
MD820‐AT 2000 kN Auto‐Compression Machine for 220‐240 V, 50 Hz, 1 ph.
Note :
All model are include specimen distance Pieces diameter of 150 mm. with 20, 50, 60, 80 and 100 mm. of effective depth
ขอ 4
ขอ 5
ขอ 6
ขอ 7
ขอ 8
ขอ 8
ขอ 9
ขอ 10
ขอ 11
ขอ 12
ขอ 12
ขอ 13
ขอ 14ขอ 15
CONCRETE
MD ProSupply Co.,Ltd 23/107 Moo 7, I Design Village Lumlukka Klong 3, Ladsayoy Lumlukka Pathumthani, Thailand 12150
T.0 2532 8122, Fax : 0 2902 0080 # 2181, website : www.mdprosupply.co.th
Specification
Machine MD815‐AT MD820‐AT
Capacity 1500 kN. 2000 kN.
Vertical Clearance 320 mm. 330 mm.
Horizontal Clearance 250 mm. 300 mm.
Max Ram Travel 50 mm. 50 mm.
Upper Platen* 220 mm. 220 mm.
Lower Platen 220 mm 220 mm
Overall Dimension. Load Frame. (W x D x H)
320 x 250 x 840 mm. 380 x 300 x 930 mm.
Overall Dimension Control Console (W x D x H)
500 x 360 x 1150 mm. 500 x 360 x 1150 mm.
Weight of Frame 500 kg. 600 kg.
Weight of Control Console 90 kg. 90 kg.
* Rockwell Hardness test 55 HRC
ขอ 1ขอ 1
ขอ 2
ขอ 2
ขอ 3
ขอ 6
ขอ 17
POINT-OF-SALE PRINTERTM-T82
Unrivalled PerformanceWith a MCBF of 60 million lines and an auto-cutter life of 1.5 million cuts.
Ease-of-useFeatures drop-in paper loading, auto-cutter and status LEDs.
All-in-one Box ConvenienceIncludes all necessary drivers and accessories for quick set-up.
DELIVERING RELIABILITY AND ADAPTABILITY ANYWHERE.
An efficient business begins with Epson’s TM-T82. With Epson’s advanced printing technology, discover reliability and functionality that ensures an easy printing solution for all users. Designed with an adaptable mounting capability, the TM-T82 allows for versatile placement even in the smallest environment. Make the TM-T82 the perfect companion for your business today.
Print Auto Cutter
CostEffective
CompactWall Mount
ขอ 18
Information correct as at March 2014
SPECIFICATIONS TM-T82
MODEL NUMBER TM-T82
Printing Method Thermal line printing
Print Font
Font 9 × 17 / 12 × 24, Hanji Font: 24 x 24, Thai Font: 9 x 24 / 12 x 24
Character Size (W x H) 0.88 × 2.13 mm / 1.25 × 3 mm, Hanji font: 3 x 3 mm, Thai font: 0.88 x 3 mm / 1.25 x 3 mm
Character Set 95 Alphanumeric, 18 set International, 128 × 43 pages (including user-defined page)
Hanzi: Simplified Chinese: GB18030-2000: 28,553
Bar code: UPC-A, UPC-E, JAN13(EAN13), JAN8(EAN), CODE39, ITF, CODABAR(NW-7), CODE93, CODE128,
GS1-128, GS1 DataBar
Two-dimensional code: PDF417, QRCode, MaxiCode, 2D GS1 DataBar, Composite Symbology
Characters Per Inch 22.6cpi / 16.9cpi, Hanji Font: 7.8cpi, Thai Font: 22.6cpi / 16.9cpi
Interface Built-in USB + UIB (Serial or Parallel interface), Ethernet interface
Receive Data Buffer 4KB or 45 bytes
Print Speed Max 150mm/s
Dot Density 203 x 203 dpi
Paper
Roll Paper Width and Roll Diameter 79.5 ± 0.5 (W) × dia. 83.0
57.5 ± 0.5 (W) × dia. 83.0
Power
Supply Voltage DC +24V ± 7%
Power Consumption
Operating Approx. 1.5A (Mean / Print ratio 18% with print pattern)
Standby Approx. 0.1A (Mean)
Power Supply External power supply (Model: PS-180)
Reliability
Printer Mechanism Life 15 million lines
Auto Cutter Life 1.5 million cuts
MTBF 360,000 hours
MCBF 60,000,000 lines
Overall Dimensions (D x W x H) 140 × 199 × 146 mm
Mass Approx. 1.7kg
EMI and Safety Standards Oceania EMI AS/NZS CSPR22 Class A
Option External buzzer unit
Standard Accessories ROM Roll paper × 1 roll (for checking the initial movement of the printer),
CD-ROM (Drivers, Utility Software, Manuals),
Setup guide, Power button cover, Waterproof power button cover,
Wall hanging bracket, Screws for wall hanging bracket,
Rubber feet for vertical installation, Control panel sheet for vertical installation,
58-mm width paper guide, External power supply (Model: PS-180)
Installation Horizontally / vertically / vertically with wall hanging bracket / wall hanging
Legend
dpi dots per 25.4 mm (dots per inch)
cpi characters per 25.4 mm
(characters per inch)
Weight: Approx. 1.7 kg (3.74lbs)
Dimensions & Weight
146mm(5.74”)
199mm(7.83”)
140mm(5.51”)
©2014 Epson Singapore Pte Ltd. All Rights Reserved. Reproduction in part or in whole, without the written permission from Epson, is strictly prohibited.
EPSON and EXCEED YOUR VISION are registered trademarks of Seiko Epson Corporation.
All other product names and other company names used herein are for identification purposes only and are the trademarks or registered trademarks of their respective owners.
Epson disclaims any and all rights in those marks. Print samples shown herein are simulations. The actual product design and contents may vary. Specifications are subject to change without notice and may vary between countries. Please check with local Epson offices for more information.
ขอ 18
201312WEB
RELATED PRODUCTS Channel Unit FSW-10 Combination with the exclusive switching box makes maximum 50 channels automatic and interval measurement possible.
Remote Power Controller RPC-OSA In combination with RPC-05A and an external battery, long-term measurement with TDS-150 using sleeping function becomes possible.
External Display Unit EDU-11
The monitor value of TDS-150 can be displayed at a remote place. Features high visibility with highbrightneess LED.
Data cable CR-3830 BNC output cable CR-31 belonging to EDU-11
1-Gauge 4-Wire method Strain Gauges
modular plug attached
/
/ L_ ________ /------------------------------~
~ UKAS
External Printer DPU-H245AS-A03A The measurement data ofTDS-150 is printed out..
Printer cable CR-5370 optional Dsub9P-10P(mini) thru 0.5m Exclusive cable
RS-232C cable CR-5360 Dsub9P-9P Cross Exclusive cable for connection with personal computer
USB cable CR-6187 Mini B-A with ferrite core 1.5m Exclusive cable for connection with personal computer
AC adaptor CR-1861 Compact FlashTM card
Capacity : 32MB-2GB
TEDS compatible sensor To use TEDS functioin of the TDS-150, TEDS compatible sensor is required to recognize its own parameters such as measuring capacity, rated output, etc. registered in the built-in IC chip.
TEDS compatible load cell TCLZ with the built-in IC chip
-~-----~ ' OIJFfAW I
t ' ' 2 IKf- R GB I
I c_.ewa ,
Specifications subject to change without prior notice
MANAGEMENT SYSTEMS
001 Tokyo Sokki Kenkyuio Co., Ltd.
Approval Certificate 1809001 Design and manufacture of strain gauges, strain measuring equipment and transducers
www.tml.jp/e 8-2, Minami-Ohi 6-Chome, Shinagawa-Ku, TOKYO 140-8560, JAPAN TEL: TOKYO 03-3763-5611 FAX: TOKYO 03-3763-5713 e -mail address:[email protected]
ขอ 19