Upload
automotech
View
578
Download
84
Embed Size (px)
DESCRIPTION
View our online brochure. We are specialists in vehicle lifts and garage equipment
Citation preview
Call now: 01889 579945www.automotechservices.co.uk
Automotech Services Ltd
EST 1972
Specialists in vehicle lifts and garage equipment
Issue 10-13
Two Post LiftsAS-6140A Twin HydraulicRam, 2 Post LiftThis lift is simple and robust. Uses a twin hydraulic ram design for steady raising and lowering operation. Although 4T capacity you can still lift the smallest cars with this machine.
Features• Lifting capacity 4T• Lifting height 1900mm• Minimum height 98mm• Manual safety locks in each post• Lift pad extensions included (for vans / 4X4)• Single or 3 phase option
Automotech was established in 1972 Call now: 01889 579945
Specialists in vehicle lifts and garage equipment
£1,199+ VAT
OnLy
DeLiVeRyFROm ASLiTTLeAS £50
4TLiFTing
Automatic arm locks
Now with 2 and 3 stage telescopic arms
50mm low clearance base plate
50mmextension
75mmextension
150mmextension
Dimensions
980mm - 1420mm
740mm - 1310mm
Extra lifting pad for long arms
Lift pad extensions for vans / 4x4 included
Specialists in vehicle lifts and garage equipment Call now: 01889 579945www.automotechservices.co.uk
All our new equipment comes with 12 months’ warranty as standard
AS-6240TA Twin HydraulicRam, Clear Floor, 2 Post Lift
This lift is simple and robust. Uses a twin hydraulic ram design for steady raising and lowering operation. Although 4T capacity you can still lift the smallest cars with this machine.
Features• Lifting capacity 4T• Lifting height 1900mm• Minimum height 98mm• Manual safety locks in each post• Safety shut-off bar on the overhead bridge• Lift pad extensions included (for vans / 4X4)• Single or 3 phase option
OnLy
£1,299+ VAT
50mmextension
75mmextension
150mmextension
Dimensions
Our lifts are fitted with a low voltage control system
4TLiFTing
Extra lifting pad for long arms
Lift pad extensions for vans / 4x4 included
Extra lifting pad for long arms
Two Post Lifts
£2,050 + VAT
OnLy
AS-6150A Twin Hydraulic Ram, 2 Post LiftThis lift is ideal for lifting large vans and commercial vehicles, with its huge lifting capacity of 5000Kg. The design of the arms will also allow the machine to be used on cars.
Features• Lifting capacity 5T• Lift height 1900mm• Minimum height 120mm• 3 stage lifting arms• Safety locks in each post• Lift pad extensions included• 240v single phase or 415v 3 phase
Automotech was established in 1972 Call now: 01889 579945
Specialists in vehicle lifts and garage equipmentinstallation service available Please contact us for information
860mm - 1800mm 860mm - 1800mm Dimensions
C.E. approved locks automatically disengage when lift is lowered
50mmextension
80mmextension
180mmextension
5TLiFTing
Lift pad extensions included
Specialists in vehicle lifts and garage equipment We are able to offer innovative leasing options
All our new equipment comes with 12 months’ warranty as standard
Four Post LiftsAS-6640P Hydraulic 4 Post Lift With a platform length of 4800mm and 2500kg jacking beam, this lift is a great value all-round machine.
Features• Lifting capacity 4.0T• Lifting height 1850mm• Platform length 4800mm• Jacking beam included• 3 phase or single phase
£2,350 + VAT
OnLy
4TLiFTing
80mmextension
180mmextension
Jacking beam extensions included
Dimensions
Includes 2.5T jacking beam
Four Post Lifts
£2,650 + VAT
OnLy
AS-6640 Hydraulic Wheel Alignment 4 Post LiftA platform length of 4800mm, 2500Kg jacking beam, rear side to side slip plates and front recessed adjustable turn plates. Makes a great valve full wheel alignment lift.
Features• Lifting capacity 4.0T• Lifting height 1850mm• Platform length 4800mm• Jacking beam included• Rear slip plates• Adjustable front recesses for turn plates• High quality turn plates included
Automotech was established in 1972 Call now: 01889 579945
Specialists in vehicle lifts and garage equipmentinstallation service available Please contact us for information
4TLiFTing
80mmextension
180mmextension
Jacking beam extensions included
Includes 2.5T jacking beam
Front turn plate recesses can be adjusted to suit different length vehicles. Rear side to side slip plates also fitted as standard.
Specialists in vehicle lifts and garage equipment
All our new equipment comes with 12 months’ warranty as standard
AS-4T36 Hydraulic 4 Post Lift The AS-4T36 is the ideal lift for vehicle storage when space is tight. The lift can be moved within minuets with the aid of the mobile wheel kit provided. The perfect lift for Classic car restoration enthusiasts.
Features• Lifting capacity 3.6T• Lifting height 1900mm• Platform length 4000mm• Full Mobile Wheel Kit Included• 3pcs Oil Drip Trays Included• 1pcs Jack Tray Included
Call now: 01889 579945www.automotechservices.co.uk
OnLy
£1,590 VAT
Robust mechanical safety lock system
Dual safety locks at each post
3.6TLiFTing
Removable drive on ramps
Removable ends stops
Low voltage control system
Dimensions
Full mobile wheel kit included
Scissor Lifts
Automotech was established in 1972 Call now: 01889 579945
Specialists in vehicle lifts and garage equipmentinstallation service available Please contact us for information
Machine bolts directly to the floor. No need for expensive ground works
Our lifts are fitted with a low voltage control system
X4 rubber sill mounting blocksincluded
Drive up ramps can be locked in the upright position to extend the platform length
REV. 01 11 / 29
Figure 2 – LAYOUT
REV. 01 11 / 29
Figure 2 – LAYOUT
Dimensions
3TLiFTing
AS-7230A Scissor Lift
This low profile full rise scissor lift is surface mounted, there is no need for expensive ground works. An ideal unit when space is tight.
Features• Lifting capacity 3T• Lifting height 1900mm• Minimum height 112mm• Rubber lift blocks included• Single or 3 phase option
£1,799+ VAT
OnLy
Specialists in vehicle lifts and garage equipment
All our new equipment comes with 12 months’ warranty as standard
REV. 02 10 / 30
Figure 2 - LAYOUT
Drive on
Dimensions
Our lifts are fitted with a low voltage control system
X4 rubber sill mounting blocksincluded
AS-7330 Three Tonne Scissor LiftIn floor, full rise scissor lift gives a flush floor finish when lowered. This means that the minimum height is 0mm. The installed lift gives a very professional appearance to any workshop.
Features• Lift capacity 3T• Lift height 1700mm• Minimum height 0mm• Rubber lift blocks included• Pneumatic safety locks• 240v single phase or 415v 3 phase
£1,799+ VAT
OnLy
Call now: 01889 579945www.automotechservices.co.uk
Full height witha clear working
area between platforms
3TLiFTing
Lift platforms can be extended for longer vehicles
Scissor Lifts
Automotech was established in 1972 Call now: 01889 579945
Specialists in vehicle lifts and garage equipment
AS-7530D garage Scissor LiftThis scissor lift is ideal for tyre shops / body shops, with the advantage of it being totally mobile.
Features• Fully mobile• Lifting capacity 3T• Extendable platform• Lifting height 1000mm• Minimum height 110mm• Pneumatic safety locks• 240V single phase• No installation required
£1,299+ VAT
OnLy
DeLiVeRyFROm ASLiTTLeAS £50
Dimensions
REV. 01 2012 10 / 26
Figure 2 - LAYOUT
mobile Wheel Kit Every machine comes with a full mobile kit as standard
860mm
490mm
110mm
3TLiFTing
1420mm - 1990mm
X4 rubber sill mounting blocks included
Drive up ramps can be locked in the upright position to extend the platform length
Quick release lock
Our lifts are fitted with a low voltage control system
Mobile LiftSpecialists in vehicle lifts and garage equipment We are able to offer innovative leasing options
All our new equipment comes with 12 months’ warranty as standard
1420mm - 1990mm £995 + VAT
OnLy
AS-7630 mobile Scissor lift
This compact mobile scissor lift is ideal for tyre and body shops. A great favorite with DIY and classic car enthusiasts.
Features• Lifting capacity 2.7T• Lifting height 1300mm• Minimum height 118mm• 240v single phase• No installation required• No air supply required
50mmextension
100mmextension
150mmextension
200mmextension
Lift pad extensions as standard
2.7TLiFTing
Our lifts are fitted with a low voltage control system Fully adjustable arms
Fully mobile
Electro / mechanical safety lock
Dimensions
Mobile Lifts
Automotech was established in 1972 Call now: 01889 579945
Specialists in vehicle lifts and garage equipment
£780 + VAT
OnLy
AS-5500 2.5 Tonne Scissor Lift The AS-5500 mobile lift has no electrical connection as it is operated with a powerful air / hydraulic pump. A great favorite with DIY and classic car enthusiasts.
Features• Lift capacity 2.5T• Lift height 1025mm• Minimum height 123mm• Pneumatic safety locks• Air operated (compressor required 6-7 bar)
SPACe SAVing
VeHiCLe LiFTS
The lift is supplied with a mobile kit as standard
1025mm max
2.5TLiFTing
Air operated! No electrical supply required
1015mm
293mm
123mmMIN
2554mm
Specialists in vehicle lifts and garage equipment
All our new equipment comes with 12 months’ warranty as standard
Call now: 01889 579945www.automotechservices.co.uk
£300+ VAT
OnLy
AS-0901/1 Portable Tilting Lift
This mobile lift is ideal for any workshop, mobile mechanic or DIY enthusiast. Lightweight and very portable, no need for any air or power supply.
Features• 1500Kg capacity • Lightweight design 58Kg • Vehicle can be tilted forwards or backwards • Supplied with manual handle • Supplied with bracket so that a drill can be used to raise and lower • Lift can be locked at required angle • Lifting height 585mm • Min height 150mm 1550
1185
1530
800
585
1285
150
Dimensions
Mobile Lifts
Automotech was established in 1972 Call now: 01889 579945
Specialists in vehicle lifts and garage equipment
SPACe SAVing
VeHiCLe LiFTS
Air operated! No electrical supply required
Optional 240v hydraulic version
Fitted with optional platform
Dimensions
Slide away drive on ramp
AS-7607 motorcycle Scissor LiftThis high quality motocycle lift is the ideal solution for motorcycle servicing and repairs. Its optional side platforms can be added to turn this versatile lift into a quad bike or mini tractor lift.
Features• Retractable drive up ramp• Removable rear platform section• Front wheel clamp• Tool tray• Bike tie down brackets• Air operated (compressor required 6-7 bar)• Optional 240V hydraulic version
£795+ VAT
OnLy
Tyre MachinesSpecialists in vehicle lifts and garage equipment We are able to offer innovative leasing options
All our new equipment comes with 12 months’ warranty as standard
DeLiVeRyFROm ASLiTTLeAS £35
£490+VAT
OnLy
AS-20SA Semi AuTOmATiC TyRe CHAngeRThis compact machine is simple to use, with a turntable that will clamp up to 20”rims.
Features• Swing arm / semi automatic style• 10” - 20” rim clamping• Inflation gauge included• Tyre lever included• 240v single phase
£580 +VAT
OnLy
AS-24SASemi AuTOmATiC TyRe CHAngeRThis Semi automatic machine is compact, simple to use and will handle rims up to 24”. A great value for money machine.
Features• Swing arm / Semi- Automatic style• 10”- 24” Rim clamping• Inflation gauge included• Tyre lever included• Plastic jaw protectors included• 240v Single phase• Motorcycle adapters available Cost £80
Includes aluminium wheel protection kit / tyre lever and inflation gauge
Tyre Machines
Automotech was established in 1972 Call now: 01889 579945
Specialists in vehicle lifts and garage equipmentinstallation service available Please contact us for information
£800 +VAT
OnLy
AS-24FAFuLLy-AuTOmATiC TyRe CHAngeRThis Automatic machine is a tilting back arm design, with a built in jaw bead blaster for seating tyre’s quickly.
Features• Fully-Automatic style• 12”- 24” Rim clamping• Built-in inflation gauge included• Tyre lever included• Plastic jaw protectors included• 240v Single phase• Motorcycle adapters available Cost £80
Includes aluminium wheel protection kit / Tyre lever / Tyre pressing tool
£1,199 +VAT
OnLy
AS-24XFA AuTOmATiC - TyRe CHAngeR WiTH POWeR ASSiST ARmThe automatic machine is the same as the AS-24FA but with the addition of a powerful pneumatic assist arm. The air operated bead lifting and pressing device makes tyre mounting and demounting much easier, especially stiff beaded low profile tyres.
Features• Fully Automatic style• Air operated assist arm• 12”- 24” Rim clamping• Built-in inflation gauge included• Built-in jaw bead blaster• Plastic jaw protectors included• 240v Single phase• Motorcycle adapters available Cost £80
Includes aluminium wheel protection kit / Tyre lever / Tyre pressing tool
Specialists in vehicle lifts and garage equipment
All our new equipment comes with 12 months’ warranty as standard
Call now: 01889 579945www.automotechservices.co.uk
OnLy
£845+VAT
OnLy
AS-24XSA Semi– AuTOmATiC TyRe CHAngeR WiTH TWin ASSiST ARmS This compact machine has the advantage of having the twin air operated bead lifting and pressing rams fitted from above. This makes tyre mounting and demounting much easier.
Features• Swing arm / semi automatic• Twin assist arms• 12”-24” rim clamping• Inflation gauge included• Plastic jaw protection covers included• Tyre lever included• 240v single phase
£895 +VAT
OnLy
AS-28XSA Semi AuTOmATiC TyRe CHAngeR WiTH TWin ASSiST ARmSCapable of handling rims up to 28” the twin air operated bead lifting and pressing rams make tyre mounting and demounting much easier.
Features• Swing arm/semi automatic • Style with twin assist arms • Inflation gauge • Plastic jaw protection covers • Tyre lever • Water/oil separators • Single phase 240v supply • Motor power 0.75 - 1.1Kw • Max wheel diameter 1143mm/45” • Inner clamping 14” - 28” • Outer clamping 12” - 25” • Bead break force 2500Kg • Net weight 200Kg • 12 month parts warranty • 240v plug in • Package size 1130 x 900 x 1030mm
Wheel Balancers
Automotech was established in 1972 Call now: 01889 579945
Specialists in vehicle lifts and garage equipmentinstallation service available Please contact us for information
This Italian designed balancer is extremely fast and accurate to use
With added auto stop feature. (This stops the wheel where the weight is to be applied)
This balancer is very easy to use. Balances wheels in seconds
AS-B24Motorised Wheel Balancer
Features• 10” - 24” rim diameter• 1.5” - 20” rim width• Auto spin once hood is lowered• Set of 4 cones included• Alloy wheel programs• Calipers, weight pliers included• 240v single phase
£545 +VAT
OnLy
£599 +VAT
OnLy
AS-401Motorised Wheel Balancer
Features• 10” - 26” rim diameter• 1.5” - 20” rim width• Auto spin once hood is lowered• Auto stop / positioning• Set of 4 cones included• Alloy wheel programs• Calipers, weight pliers included• Counter balanced chassis• 240v single phase
AS-HB24 Hand Spin Wheel Balancer
Features• 10” - 24” rim diameter• 1.5” - 20” rim width• Set of 4 cones included• Alloy wheel programs• Calipers, weight pliers included• 240v single phase
£499 +VAT
OnLy
The ideal machine for the mobile tyre fitter
Tyre Machine AccessoriesSpecialists in vehicle lifts and garage equipment We offer innovative leasing options
All our new equipment comes with 12 months’ warranty as standard
OnLy
AS-401CLAThe adapter enables centre less wheels (Wheels manufactured without a hole in the centre) to be mounted to the AS-401 Balancer.
£185 +VAT
OnLy
AS-401LCThe large cone adapter enables the AS-401 balancer to handle wheels with a larger than 140mm centre hole.
£ 110 +VAT
OnLy
AS-401mCAThe adapter enables the AS-401 Balancer to balance motorcycle wheels.
£ 140+VAT
OnLy
AS-B24LCThe large cone adapter enables the AS-B24 range of balancers to handle wheels with a larger than 140mm centre hole.
£ 70 +VAT
OnLy
AS-B24CLAThe adapter enables centre less wheels (Wheels manufactured without a hole in the centre) to be mounted to the AS-B24 range of balancers.
£ 140+VAT
OnLy
AS-B24mCAThe adapter enables the AS-B24 range of balancers to balance motorcycle wheels.
£ 120 +VAT
OnLy
AS-24mCJ The kit enables motorcycle wheels to be mounted on to all Automotech 24” and above tyre machines.
£ 80 +VAT
OnLy
AS-18AB BeAD SeATeR The ideal tool for fitting / seating tyres to rims.
£ 118 +VAT
OnLy
AS-18ABHBeAD SeATeR The ideal tool for fitting / seating tyres to rims, with easy operation via the slide valve on the hose.
£ 118 +VAT
OnLy
Garage Equipment
Automotech was established in 1972 Call now: 01889 579945
Specialists in vehicle lifts and garage equipment
AS-Tu40These fully ball-raced cast iron turn plates will not bend or buckle under load. Ideal for use with Wheel Alignment / Tracking Gauges or MOT 4 Post Lifts.
Features• Plates come as a pair• Cast iron upper and lower components• Ball bearings fitted for ease of use and precision• Lock off feature (plates can be lock to stop rotation)• Tough powder coat paint finnish
OnLy
£230+VAT
AS-LWA50 Wheel Alignment gaugeThe AS-LWA50 wheel alignment gauge measures the angle between the vehicle wheels to give toe-in / toe-out readings. The unit is easily calibrated and very simple to use.
Features• Precision laser to indicate toe-in / toe-out• Can be used on vehicle lifts• Will work on vehicles with rim diameters 8”-24”• Battery powered by 2x AA batteries (included)• Laser beam height 40mm from floor• Measuring range +/-2deg• Laser class II
OnLy
£266.67+VAT
AS-LWA40 Wheel Alignment gaugeThe AS-LWA40 wheel alignment gauge measures the angle between the vehicle wheels to give toe-in / toe-out readings. The unit is easily calibrated and very simple to use.
Features• Precision laser to indicate toe-in / toe-out• Tough 2.5mm steel construction• Can be used on vehicle lifts• Will work on vehicles with rim diameters 6” - 23”• Battery powered by 2 x AA batteries (included)• Measuring range +/- 3deg• Laser class II
OnLy
£212.50+VAT
Garage EquipmentSpecialists in vehicle lifts and garage equipment
All our new equipment comes with 12 months’ warranty as standard
AS-0104-2 engine Support BeamThe AS-0104-2 Engine support Beam is the essential tool when removing gear boxes / engine supports etc.
Features• Capacity 500Kg• Fully adjustable width 630mm - 1800mm• Fully adjustable support bracket (left, right, up, down)• Rubber mounted feet
£54.17OnLy
+VAT
AS-0901-2 mini motorcycle LiftThe lift is made from a solid steel construction with a durable powder coat finish. It can be placed quickly under the frame or engine of the motorcycle.
Features• Includes rubber-coated fully adjustable cradles• 0.5T Capacity (500Kg)• Dimensions (L X W X H) 450mm x 150mm x 90mm• Min Height 90mm (Without cradles)• Max Height 500mm ( With Cradles)• Weight 14.5Kg
£49.99OnLy
+VAT
AS-0601-1 engine / gear Box StandThe ideal work station when rebuilding units.
Features• Capacity 350Kg• Fully adjustable cradle to accept a wide varity of engines / gearboxes• Head rotates 360 degrees• Steel casters
OnLy
£41.67+VAT
AS-0301C 1.0 Tonne Spring CompressorMakes changing shock absorbers quick and easy.
Features• 1.0T capacity (1000Kg)• For use on spring length 200mm - 570mm• For use on spring diameter 100mm - 250mm• Ram travel 330mm• High speed foot pump
OnLy
£73+VAT
AS-0601-2 engine / gear Box StandThe ideal work station when rebuilding units.
Features• Capacity 450Kg• Fully adjustable cradle to accept a wide varity of engines / gearboxes• Head rotates 360 degrees• Steel casters
OnLy
£50+VAT
Call now: 01889 579945www.automotechservices.co.uk
Garage Equipment
Automotech was established in 1972 Call now: 01889 579945
Specialists in vehicle lifts and garage equipment
AS-0901F 20T PressFeatures• 20T hydraulic pump• Floor mounted• Movable / lockable. Direct push ram (not bottle jack type)• Multi position bed 0mm- 490mm• Ram stroke 145mm
£180OnLy
+VAT
AS-0601B 2.0 Tonne Folding engine CraneFeatures• Lift capacity 2.0T• Four lift positions 2000Kg, 1500Kg, 1000Kg, 500Kg• Maximum lift height to hook 2340mm• High speed hydraulic pump• Weight 80Kg
£110OnLy
+VAT
AS-1102B Hydraulic Pipe BenderSolid steel construction with durable powder coat finish.
Features• 16T Powerful Hydraulic Ram• Includes 8pc cast Iron formers. 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” (15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm)
£104+VAT
OnLy
AS-0102A 0.6 Tonne Transmission JackA robust and useful piece of equipment for any workshop.
Features• Lift capacity 0.6T• Minimum height 1140 mm• Maximum height 1950mm
OnLy
£75.30+VAT
AS-0101H 0.5T 2 Stage Transmission JackThe jack has a lifting range from 820mm - 1740mm. With a fully adjustable cradle and tie down chains.
Features• 0.5T capacity• Fully adjustable cradle• Min height 820mm• Max height 1740mm• Steel casters• High speed hydraulic foot pump• Precision lowering valve
OnLy
£103+VAT
Specialists in vehicle lifts and garage equipment
All our new equipment comes with 12 months’ warranty as standard
AS-80LPFeatures• Polyethylene 80L reservoir (you can see the oil clearly. The unit will not rust)• Rotary pump or gravity drain top• Adjustable height• Bowl diameter 440mm• Mobile with coasters
OnLy
£69.59+VAT
AS-36LFeatures• Polyethylene 36L reservoir (you can see the oil clearly. The unit will not rust)• Drain bowl with filter• Adjustable height• Max height 1600mm• Bowl diameter 440mm• Mobile with coasters
OnLy
£45.10+VAT
AS-200/300 Air Compressor 10.6cfm Features• 200L tank / receiver• 300L / min (10.6cfm) cast iron pump• 3Kw (4Hp)• Twin capacitor start• Slow running pump (less noise / less wear)• Oil lubricated • C.E. approved
£380OnLy
+VAT
AS-21/200 Air Compressor 6.7cfmFeatures• 21 litre tank / receiver• 192 l/ min (6.7cfm ) cast iron pump• (2hp) 240v (with plug)• Air outlet with regulator• Includes air hose and coupling• Oil lubricated for long life• Cast iron pump for long life
£100OnLy
+VAT
Call now: 01889 579945www.automotechservices.co.uk
Prices effective from 1st October 2013. Prices and products are subject to change without notice. All prices exclude VAT and delivery
Automotech Services LtdTel: 01889 579945 Fax: 01889 579350 Email: [email protected]: www.automotechservices.co.uk
Unit 6, Oakhurst Park, The Levels, Brereton, Rugeley, Staffordshire, WS15 1RD
Vist the website