60
Automotive Equipment Training Programme 2011

Automotive Aftermarket Training Calender 2011

Embed Size (px)

Citation preview

Page 1: Automotive Aftermarket Training Calender 2011

Automotive Equipment Training Programme 2011

Page 2: Automotive Aftermarket Training Calender 2011

At Bosch Training Centre 04

Courses on Diesel Fuel Injection Equipment 04

Course on Auto Electrical 06

Seminar for OE Customers 06

Courses for Institutional Customers 06

Courses on Workshop & Test Equipment 08

Course on Vehicle Maintenance & Systems 08

Specialised Courses on Systems 08

Course for Bosch System Technicians 09

Courses for Sales/Service Personnel 09

Courses for Educational Institutes – ITI/Diploma/Engineering 10

Colleges/Private JOC Colleges

Course for Trainers 10

Course for Students 10

Course for New Entrants (AA) 10

Course for Employees from Bosch Group (India) 10

At Regional/Local Training Centres 11

Courses on Diesel Fuel Injection 11

Course on Gasoline Fuel Injection 13

Course on Auto Electrical 13

Courses on Bosch Battery 13

Seminars – Techno-commercial 14

Courses for State Transport Undertakings 16

Courses for Sales Personnel 17

Course on 2-Wheeler Products 17

Courses on Workshop & Test Equipment 18

Course for Defence Personnel 18

Course for OE Customers 18

Courses for Students and Lecturers 19

Courses for Bosch Car Service (BCS) 20

Training Centres 26

The 2011 Training Course Schedule – 27

Bangalore 28

North Region 30

South Region 38

East Region 44

West Region 50

Eligibility and Enrolment Procedure 56

Contents

Page 3: Automotive Aftermarket Training Calender 2011

03

Dear Business Partner,

The Indian automotive market is growing exponentially with the launch of new models of vehicles and increasingly the emphasis is on improving emission standards, bettering safety aspects and increasing driving comfort. This constant evolution has resulted in the launch of many advanced products and systems including Common Rail Technology, Electronic Braking Systems, Heating/Ventilation controls, Automatic Transmission, to name a few.

The entry of these sophisticated systems and technologies into the automotive space has challenged the present conventional system of our traditional dependence on manpower. However this can be tackled – by raising the technical competence of our human workforce through an efficient system of training and appropriate knowledge transfer initiatives.

At Bosch, our Training Team understands this need and the advantages of imparting new knowledge to stay on par with the latest technological advancements. Keeping this as the prime objective, we have developed and incorporated new course modules in the 2011 Training programme with special emphasis on CAR related products and systems.

Apart from this, the focus of this year’s Training programme will also be on more hands-on training for improving competencies on new Bosch diagnostic equipment. A fact reflected in the inclusion of troubleshooting and vehicle diagnostics across most courses in the calendar. To this end, special emphasis is also being placed on upgrading training centre facilities across the country.

We believe that world-class automobiles are best handled by world-class technicians armed with up-to-date knowledge and equipment, because only this will ensure a happy, satisfied and growing customer base – not to mention laying a solid foundation for greater profits in business, today and in the days to come. Through the Bosch Training Programmes for the year 2011, we are confident that we can aid you in providing more advanced and competent standards of service to take your business to the next level in this highly competitive sector of the automotive industry.

Looking forward to help you achieve world-class levels through our training which is especially designed for your needs.

Yours sincerely,

S. Muralidharan T.S. AnandakumarVice President Country ManagerAutomotive Aftermarket Customer Support Automotive Aftermarket

S. Muralidharan T.S. Anandakumar

Page 4: Automotive Aftermarket Training Calender 2011

04

Courses – Bosch Training Centre

Courses on Diesel Fuel Injection EquipmentCourse Code: EP - X

Duration: Ten days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment with more hands-on training.

Participants: Fuel Injection Equipment Service Personnel, preferably Bosch Authorised Representatives.

Course Content: Working Principle, Repair and Testing of PE...A type Multi-cylinder Fuel Injection Pump with RSV and RQV Governors, VE Distributor-type Fuel Injection Pump, Add-on Modules fitted on PE and VE Pumps, Injector, Injection Timer, Feed Pump and Filters, Injection Timing Setting on Diesel Engine, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.

Place: BTC (Naganathapura, Bangalore) (on request).

Course Code: EP - 4

Duration: Three days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment.

Participants: Fuel Injection Equipment Service Personnel, preferably Bosch Authorised Representatives, Engineers/Technicians from OEMs.

Course Content: Working Principle, Repair and Testing of Distributor-type Fuel Injection Pump Type – VE with and without Manifold Pressure Compensator (LDA), Add-on Modules, Injectors, Filter and Injection Timing Setting on Diesel Engine fitted with VE Pump, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.

Place: BTC (Naganathapura, Bangalore).

Course Code: EP - P

Duration: Four days.

Objective: To make participants competent with Heavy Duty Test Bench to carry out quality service on Diesel Fuel Injection Equipment.

Participants: Fuel Injection Equipment Service Personnel of Bosch Authorised Representatives equipped with Heavy Duty Test Bench.

Course Content: Working Principle, Repair and Testing of Bosch PE...P Fuel Injection Pump and RQV-K Governor, Bosch EDC Governor fitted on PE...P Fuel Injection Pumps, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.

Place: BTC (Naganathapura, Bangalore).

Page 5: Automotive Aftermarket Training Calender 2011

05

Course Code: EDC - 1

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Bosch VE Fuel Injection Pumps with Electronic Diesel control (VP 37).

Participants: Personnel servicing Fuel Injection Equipment.

Course Content: Working Principle, Repair, Testing and Adjustment of Bosch VE Fuel InjectionPumps (VP 37), Safety and Housekeeping, Maintenance and Upkeep of Service Literature.

Place: BTC (Naganathapura, Bangalore).

Course Code: EDC - 2

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Bosch VP 44 Fuel Injection Pumps.

Participants: Personnel servicing Fuel Injection Equipment, preferably from Bosch Authorised Representatives.

Course Content: Working Principle, Repair, Testing and Adjustment of Bosch VP 44 Fuel Injection Pumps on EPS 815 Test Bench, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.

Place: BTC (Naganathapura, Bangalore).

Course Code: CR - 1

Duration: Three days.

Objective: To make participants competent in carrying out quality service on Common RailHigh-pressure Pumps and Injectors.

Participants: Technicians from BDS and OEMs equipped with EPS 815 and having experiencein handling all types of existing fuel injection systems.

Course Content: Structure, Function of Common Rail High-pressure Pumps and Injectors(CPIK, CPIH& CRI), Characteristics, Testing on the Pump Test Bench EPS 815 with KMA Measuring technique and Testing of Common Rail Injectors.

Place: BTC (Naganathapura, Bangalore).

Course Code: CR - 2

Duration: Three days.

Objective: To make participants competent in carrying out quality service on Common RailHigh-pressure Pumps and Injectors.

Participants: Technicians from BDS and OEMs equipped with EPS 815 and having experiencein handling all types of existing fuel injection systems.

Course Content: Structure, Function of Common Rail High-pressure Pumps and Injectors(CP3, CPN2.2, CBI8 & CRIN), Characteristics, Testing on the Pump Test Bench EPS 815 with KMA Measuring technique and Testing of Common Rail Injectors.

Place: BTC (Naganathapura, Bangalore).

Course Code: EPS

Duration: Two days.

Objective: The participants will be able to operate the EPS 815 Test Bench using theSoftware EPS 945/944.

Participants: New staff, existing and potential EPS 815 users. Personnel who have good experience on handling all types of fuel injection pump and governors.

Page 6: Automotive Aftermarket Training Calender 2011

06

Course Content: Operation of Test Bench EPS 815 with KMA measuring technique.

f Programming of test protocol adjustment steps.

f Importing/exporting data.

f Inline and Distributor Pump test equipment fitment.

f Basic pump adjustment.

f Vehicle Diagnosis (Diesel vehicle)

Place: BTC (Naganathapura, Bangalore).

Course on Auto ElectricalCourse Code: AEL - 2

Duration: Three days.

Objective: To make participants competent in carrying out quality service on Bosch Auto Electrical Products and Test Equipment.

Participants: Personnel handling Auto Electrical Equipment at Bosch Authorised Stockists/ Distributors/Workshops.

Course Content: Working Principle, Repair and Testing of Bosch Auto Electrical Products and Respective Test Equipment.

Place: BTC (Naganathapura, Bangalore) (on request).

Seminar for OE CustomersCourse Code: OES

Duration: Three days.

Objective: To provide knowledge on Bosch Products and to inform participants about the latest developments in Bosch Products.

Participants: Managers/Engineers of OEMs manufacturing Diesel Engines and Vehicles.

Course Content: Design, Working Principle, Test Procedures of Bosch Fuel Injection and Auto Electrical Equipment, Interaction with Bosch R&D, Quality and Service Departments.

Place: BTC (Naganathapura, Bangalore).

Courses for Institutional CustomersCourse Code: RLY

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Fuel Injection Equipment.

Participants: Fuel Injection Equipment Service Personnel of Railways.

Course Content: Working Principle, Repair and Testing of PF Type Fuel Injection Pumps and Injectors used by Indian Railways, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.

Place: BTC (Naganathapura, Bangalore)

Page 7: Automotive Aftermarket Training Calender 2011

07

Course Code: DEF - 2

Duration: Three days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment.

Participants: Fuel Injection Equipment Service Personnel from Defence having minimum two years of on-the-job experience.

Course Content: Working Principle, Repair and Testing of PE...A Multi-cylinder Fuel Injection Pump with RSV and RQV Governors, Manifold Pressure Compensator fitted on PE Pumps, Injection Timing Lock on PE Pumps, Injectors, Injection Timers, Filters and Feed Pump, Injection Timing Setting on Diesel Engine, Working Principle, Repair and Testing of Distributor Type, Fuel Injection Pump Type – VE with and without Manifold Pressure Compensator (LDA), Add-on Modules, Injection Timing Setting on Diesel Engine fitted with VE Pump, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.

Place: BTC (Naganathapura, Bangalore).

Page 8: Automotive Aftermarket Training Calender 2011

08

Courses on Workshop & Test EquipmentCourse Code: WTE - 2

Duration: Three days.

Objective: To help participants in carrying out Maintenance, Troubleshooting and Minor Repairs of Bosch Authorised Workshop and Test Equipment.

Participants: Personnel looking after the maintenance of Bosch Authorised Workshop and Test Equipment, TMSS.

Course Content: Operating Instructions, Maintenance, Troubleshooting Guidelines, Service and Minor Repairs of Auto Electrical and FIE Test Benches, BAT 121, Battery Load Testers, Battery Chargers, Tyre Changers, Wheel Balancers, ACS and all other diagnostic products of Bosch.

Place: BTC (Naganathapura, Bangalore) (on request).

Course Code: MRS

Duration: Four days.

Objective: To help participants in carrying out AMC Activities, Troubleshooting and Minor Repairs of Bosch Authorised Workshop and Test Equipment.

Participants: Missionary Representatives looking after maintenance of Bosch Authorised Workshop and Test Equipment.

Course Content: AMC Activity, Operating Instructions, Maintenance, Troubleshooting Guidelines, Service and Minor Repairs of Auto Electrical and FIE Test Benches, ASC Equipment, BAT 121, Battery Chargers, Battery Load Testers, Tyre Changers, Wheel Aligners and other workshop equipment.

Place: BTC (Naganathapura, Bangalore).

Course on Vehicle Maintenance & SystemsCourse Code: VMS

Duration: Five days.

Objective: To make the participants competent in carrying out quality service on Bosch Products fitted in vehicles.

Participants: Personnel at BCS Bosch Authorised Stockists/Distributors/Workshops offering Vehicle Service.

Course Content: Practicals on Removal and Fitment of Bosch Products on the Vehicles, using Test Equipment for Diagnosis and General Service and Maintenance Aspects.

Place: BTC (Naganathapura, Bangalore) (on request).

Specialised Courses on SystemsCourse Code: GFI - 2

Duration: Two days.

Objective: To educate participants about newer technologies and products in Petrol Injection.

Participants: Bosch Territory Managers – Sales and Service, Bosch Authorised Distributors’ Field Representatives, Bosch Authorised Product Stockists and BCS (by invitation).

Course Content: Technology and Product Knowledge on Petrol Injection. Working of Petrol Engine, Carburetion Process, Single Point Fuel Injection, Multi Point Fuel Injection and Vehicle Diagnosis – Hardware and Software.

Place: BTC (Naganathapura, Bangalore) (on request).

Page 9: Automotive Aftermarket Training Calender 2011

09

Course for Bosch System TechniciansCourse Code: BST

Duration: Two to five days (depending on the module).

Objective: To make the participants knowledgeable about Bosch Products, Equipment and Vehicle Systems as per the detailed course plan for System Technicians.

Participants: System Technician Trainees working with Bosch Authorised Workshops (by invitation).

Course Content: Working Principle, Repair and Testing of Bosch Products and Respective Test Equipment, Knowledge on Vehicles, New Technologies and Diagnostic Tools/Equipment.

Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.

Courses for Sales/Service PersonnelCourse Code: TMSS

Duration: Five days.

Objective: To make participants competent in handling sales and service activities pertaining to Bosch Products.

Participants: Bosch Territory Managers – Sales and Service (by invitation).

Course Content: Product-specific contents (will be mentioned in the invitation).

Place: Naganathapura, (Bangalore).

Course Code: TMSE

Duration: Five days.

Objective: To make participants competent in handling service activities pertaining to new Bosch Products and Equipment.

Participants: Bosch Territory Managers – Service (by invitation).

Course Content: Product-specific contents (will be mentioned in the invitation).

Place: BTC (Naganathapura, Bangalore) (on request, basic courses of two/three days duration will be conducted for TMSS/TMSE at RTCs on mutually agreeable dates).

Page 10: Automotive Aftermarket Training Calender 2011

10

Courses for Educational InstitutesCourse for TrainersCourse Code: TTT

Duration: Five days.

Objective: The ‘Train the Trainer programme’ enables participants to stay abreast with the latest technologies.

Participants: Trainers at educational institutes, OE customers and other institutional customers, Regional/Local Trainers (by special invitation).

Course Content: New technologies in Diesel, Gasoline, Vehicle Diagnosis – Hardware and Software, Latest Product Launch, and Service and Training Concepts.

Place: BTC (Naganathapura, Bangalore).

Course for StudentsCourse Code: NEI - 2

Duration: Three days.

Objective: To educate participants about newer automotive technologies.

Participants: Final year students from technical educational institutes.

Course Content: Newer Technologies in Diesel and Petrol Injection and Vehicle Diagnosis – Hardware and Software.

Place: BTC (Naganathapura, Bangalore).

Course for New Entrants (AA)Course Code: AAN

Duration: Five days.

Objective: Product Knowledge on all AA products.

Participants: All newly joined AA employees.

Course Content: Overview and understanding of Diesel Fuel Injection Systems, Gasoline Systems, Diagnostic Equipment and Automotive Accessories of Bosch.

Place: BTC (Naganathapura, Bangalore) (on request).

Course for Employees from Bosch Group (India)Course Code: RB-IND

Duration: Three days.

Objective: To make participants understand about Systems in Automobiles.

Participants: Personnel employed with Bosch Group companies.

Course Content: Overview and understanding of various vehicle systems with focus on Bosch Automotive products.

Place: BTC (Naganathapura, Bangalore) (on request)

Page 11: Automotive Aftermarket Training Calender 2011

11

Courses – Regional/Local Training Centres (RTC/LTC)

Courses on Diesel Fuel InjectionCourse Code: PE

Duration: Three days.

Objective: To make the participants competent in carrying out quality service on Diesel Fuel Injection Equipment (PE Pumps).

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and independent workshops handling Bosch Fuel Injection Equipment.

Course Content: Working Principle, Repair and Testing of PE Multi-cylinder Pumps fitted with RSV and RQV Governors, Injection Timer, Feed Pump and Filters, MPC unit and all other Add-on Modules, Removal and Fitment of FIE on the Vehicle and Setting of Fuel Injection Timing.

Place: RTCs/LTCs.

Course Code: VE - 1

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment (VE Pumps).

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and independent workshops handling Bosch FIE.

Course Content: Working Principle, Repair and Testing of VE Pumps fitted with Mechanical Governors. Filters, Removal and Fitment of FIE on the Vehicle and Setting of Fuel Injection Timing.

Place: RTCs/LTCs.

Course Code: VE - 2

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment (VE Pumps with Add-on Modules).

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and independent workshops handling Bosch Fuel Injection Equipment.

Course Content: Working Principle, Repair and Testing of VE Pumps with MPC and all other Add-on Modules. Filters, Removal and Fitment of FIE on the Vehicle and Setting of Fuel Injection Timing.

Place: RTCs/LTCs.

Page 12: Automotive Aftermarket Training Calender 2011

12

Course Code: PF

Duration: One day.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment.

Participants: Fuel Injection Equipment Service Personnel, preferably Bosch Authorised Representatives, Engineers/Technicians from OEMs.

Course Content: Working Principle, Repair and Testing of PF and PFR Fuel Injection Pumps, Injectors, Importance of BDC dimension and adjustment.

Place: RTCs.

Course Code: EDC

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Bosch VE Fuel Injection Pumps with Electronic Diesel Control (VP 37).

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives, Engineers/Technicians from OEMs, equipped with EPS 611/620 + EDC Tools.

Course Content: Basics of EDC System, Working Principle, Repair, Testing and Adjustment of Bosch Distributor-type Fuel Injection Pump (VP 37) and Injectors.

Place: RTCs.

Course Code: VS

Duration: One day.

Objective: To make participants understand the importance of Injection Timing andcompetent in setting Injection Timing on Diesel Vehicles fitted with PE and VE type Fuel Injection Pumps.

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives, Engineers/Technicians from OEMs and Diesel Mechanics.

Course Content: Basic knowledge on FIE products, Setting Injection Timing on Diesel Vehiclesfitted with PE and VE type Fuel Injection Pumps, General Maintenance Tips and Warranty Terms.

Place: RTCs/LTCs.

Course Code: PE - 1

Duration: Two days (on request).

Objective: To make participants equipped with Heavy Duty Test Bench competent to carry out quality service on Fuel Injection Equipment.

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives, equipped with Heavy Duty Test Bench EPS 611/620.

Course Content: Working Principle, Repair and Testing of Bosch PE...P type Fuel Injection Pumps with RQV-K Governor and Injectors.

Place: RTCs (on request).

Page 13: Automotive Aftermarket Training Calender 2011

13

Course on Gasoline Fuel InjectionCourse Code: GFI - 1

Duration: One day.

Objective: To educate participants about newer technologies in Gasoline Systems.

Participants: Bosch Territory Managers – Sales and Service, Bosch Authorised Distributors’ Field Representatives, Bosch Authorised Product Stockists, BCS, etc. (by invitation).

Course Content: Working of Gasoline Engines and Working Principle of Multi Point Fuel Injection System and Vehicle Diagnostics.

Place: RTCs.

Course on Auto ElectricalCourse Code: AEL - 1

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Bosch Auto Electrical Products.

Participants: Auto Electricians working in Bosch Authorised Workshops.

Course Content: Working Principle, Repair and Testing of Bosch Auto Electrical Products and Respective Test Equipment. Removal and fitment of Alternators/Starter Motors on Vehicle.

Place: RTCs/LTCs.

Courses on Bosch BatteryCourse Code: BB

Duration: One day.

Objective: To make participants competent in selling Bosch Batteries effectively and handling warranty.

Participants: Bosch Authorised Distributors, Stockists, Dealers and Workshop Personnel handling battery sales.

Course Content: Construction and Working Principle, Features, Advantages and Benefits, Product Range, Charging, Testing, Using BAT 121, Competitors’ Information, Opportunity Areas, Sales Arguments, Effective Campaigning and Warranty Handling.

Place: RTCs/LTCs.

Course Code: VEH

Duration: One day.

Objective: To provide basic knowledge on Vehicle Systems.

Participants: Students from Polytechnics, Newly appointed Technicians employed with Bosch Authorised Representatives.

Course Content: Diesel Engine Basics, Fuel Injection System Basics and other Vehicular Systems.

Place: RTCs/LTCs.

Page 14: Automotive Aftermarket Training Calender 2011

14

Seminars – Techno-commercialCourse Code: BWF

Duration: One day.

Objective: To make Bosch Authorised Workshop Foremen competent in carrying out quality service on Bosch FIE and AE Products, thus ensuring customer satisfaction.

Participants: Foremen working in Bosch Authorised Workshops.

Course Content: Advanced knowledge on all Bosch Products, FIE, AE and Automotive Accessories, Warranty Administration, Attending Customers, Safety and Housekeeping, Troubleshooting of Vehicles, Effective Field Campaigning and Tips on Developing the Service Business.

Place: RTCs.

Course Code: OECD

Duration: One day.

Objective: To provide knowledge on Bosch Products and Marketing Policies.

Participants: Works Managers and Technicians working with OECDs.

Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their Quality, Features, Schemes and Warranty Terms.

Place: RTCs/LTCs.

Course Code: FO

Duration: One day.

Objective: To provide knowledge on Bosch Products.

Participants: Proprietors, Partners and Technicians from Fleet Operators.

Course Content: Basic knowledge on Bosch Products, Maintenance Aspects, their Quality, Features and Warranty Terms.

Place: RTCs/LTCs.

Course Code: IE

Duration: One day.

Objective: To provide knowledge on Bosch Products.

Participants: Electricians having their own garages.

Course Content: Basic knowledge on Bosch Auto Electrical Products, Maintenance Aspects, their Quality, Features and Warranty Terms.

Place: RTCs/LTCs.

Page 15: Automotive Aftermarket Training Calender 2011

15

Course Code: CSM

Duration: One/Two days.

Objective: To make Bosch Authorised Workshop Counter Salesmen competent in attending customers profitably and ensuring customer satisfaction.

Participants: Counter Salesmen working in Bosch Authorised Workshops.

Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, Warranty Administration, Attending Customers, Effective Field Campaigning and Tips on Developing the Service Business.

Place: RTCs/LTCs.

Course Code: PMW

Duration: One day.

Objective: To provide knowledge on latest products, Test and Diagnostic Equipment.

Participants: Proprietors of Bosch Authorised Workshops.

Course Content: Information on Latest Products, their Features, Advantages and Benefits, Test and Diagnostic Equipment required for the Workshop.

Place: RTCs (on request).

Course Code: CRO

Duration: One day (on request).

Objective: To provide basic knowledge on all Bosch Products, Test and Diagnostic Equipment, Handling, Storage and Shelf Life.

Participants: Customer Relations Officers at various Sales Offices, Personnel employed with C & F Agents.

Course Content: Information on all Bosch Products, their Applications and Usage, Test and Diagnostic Equipment used by customers.

Place: RTCs (on request).

Page 16: Automotive Aftermarket Training Calender 2011

16

Courses for State Transport UndertakingsCourse Code: STU - 1

Duration: Two days.

Objective: To provide knowledge on Bosch Products.

Participants: Technicians working with State Transport Undertakings and other Government Departments.

Course Content: Basic knowledge of Bosch Products, Maintenance Aspects, their Quality, Features and Warranty Terms.

Place: RTCs/LTCs.

Course Code: STU - 2

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment, Auto Electrical and other Bosch Products.

Participants: Nominated Personnel from State Transport Undertakings.

Course Content: Working Principle, Repair and Testing of PE Multi-cylinder Pumps, Alternators, Starter Motors and other Bosch Automotive Accessories.

Place: RTCs/LTCs.

Course Code: WTY

Duration: One day.

Objective: To make participants competent in handling Warranty Issues.

Participants: Bosch Authorised Workshops, Bosch Authorised Distributors’ Field Representatives, Bosch Authorised Product Stockists, BCS, etc.

Course Content: Manufacturing codes, Warranty Terms and Procedures.

Place: RTCs/LTCs.

Page 17: Automotive Aftermarket Training Calender 2011

17

Courses for Sales PersonnelCourse Code: PFR - 4W

Duration: One/Two days.

Objective: To make participants competent in handling Bosch Products and relatedmarket issues.

Participants: Field Representatives working with Bosch Authorised Network.

Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their Quality, Features, Customer Service Issues and Warranty Administration.

Place: RTCs/LTCs.

Course Code: BS

Duration: One day.

Objective: To make participants competent in handling Bosch Products and relatedmarket issues.

Participants: Bosch Authorised Stockists, Proprietors/Partners.

Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their Quality, Features and Schemes, Selling Skills, Spare Parts Inventory Planning, Customer Service Issues and Warranty Administration.

Place: RTCs/LTCs (on request).

Course on 2-Wheeler ProductsCourse Code: PFR - 2W

Duration: One day.

Objective: To make the participants competent in handling the Bosch 2-Wheeler Product Range and related issues in the market.

Participants: Bosch Authorised 2-Wheeler Distributors, Proprietors/Partners.

Course Content: Basic Knowledge on the Bosch 2-Wheeler Product Range, Quality, Features, Customer Service Issues and Warranty Administration.

Place: RTCs/LTCs.

Page 18: Automotive Aftermarket Training Calender 2011

18

Courses on Workshop & Test EquipmentCourse Code: WTE - 1

Duration: One/Two days.

Objective: To enable participants understand the Bosch Test Equipment range and basic troubleshooting.

Participants: Bosch Authorised Workshop Personnel nominated to handle Test Equipment.

Course Content: Practical Demonstration and Troubleshooting of Workshop Equipment like FIE Test Bench, AE Test Bench, BAT 121, Battery Charger, etc.

Place: RTCs.

Course Code: BWSS

Duration: Two days.

Objective: To enable participants to become competent in using ESI[tronic] and MSI.

Participants: Bosch Car Service/Bosch Authorised Workshop Personnel nominated tohandle ESI/MSI.

Course Content: Practical Demonstration of ESI/MSI and Practice by Participants, WorkshopReports, Manufacturing Codes, Warranty Terms and Procedures.

Place: RTCs/LTCs.

Course for Defence PersonnelCourse Code: DEF - 1

Duration: Two days.

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment, Auto Electrical and other Bosch Products.

Participants: Nominated Personnel from Defence Organisations.

Course Content: Working Principle, Repair and Testing of PE Multi-cylinder Pumps, Alternators, Starter Motors and other Bosch Automotive Accessories.

Place: RTCs.

Course for OE CustomersCourse Code: OEM

Duration: Two days.

Objective: To provide knowledge on Bosch Products (FIE and AE) and to apprise participantsof the latest development in Bosch Products.

Participants: Managers/Engineers of OEMs manufacturing Diesel Engines and Vehicles.

Course Content: Design, Working Principle, Test Procedure of Bosch Products (FIE and AE),and Latest Developments.

Place: RTCs.

Page 19: Automotive Aftermarket Training Calender 2011

19

Courses for Students and LecturersCourse Code: NEI - 1

Duration: One day.

Objective: To make participants knowledgeable about newer automotive technologies.

Participants: Final year students from technical educational institutes.

Course Content: Newer Technologies in Diesel and Petrol Injection, Vehicle diagnosis – Hardwareand Software, and Product Knowledge on Newer Automotive Technologies and Accessories.

Place: RTCs/LTCs.

Course Code: INS

Duration: One day.

Objective: To provide knowledge on all Bosch Products, Test and Diagnostic Equipment.

Participants: Lecturers from engineering colleges, polytechnics and other educational institutions.

Course Content: Basic knowledge on all Bosch Products, Test and Diagnostic Equipment andLatest Developments.

Place: RTCs/LTCs.

Page 20: Automotive Aftermarket Training Calender 2011

20

Courses for Bosch Car Service (BCS)Course Code: BCS - 1 – Basic Module

Duration: Two days.

Objective: To enable operating level Bosch Car Service Personnel understand the concept and make them competent in Vehicle Diagnosis.

Participants: Bosch Car Service Technicians.

Course Content: Practical Demonstration of Petrol Injection System, Diagnosis using KTS 550/570, Bosch Parts for Cars and Customer Service.

Place: RTCs/ LTCs.

Course Code: BCS - 2 – Advanced Module

Duration: Five days.

Objective: To make Bosch Car Service Personnel competent in handling business, customer service and technical issues.

Participants: Bosch Car Service Works Incharge.

Course Content: Business Scenario in Car Service, Industry, Service Marketing, Customer Service, Petrol Injection Systems, Diagnosis/Troubleshooting, KTS 550/570/650/180/200, Battery Testers, Battery Load Testers, Wheel Balancers, Tyre Changers, Parts for Cars from Bosch.

Place: BTC (Naganathapura, Bangalore).

Page 21: Automotive Aftermarket Training Calender 2011

21

Course Code: EEM - 1 (Electricals/ Electronics – Module 1) – Basic Module

Duration: Three days.

Objective: Refreshing the basics of vehicle electrical system & vehicle electronicSystem. Test possibilities of different systems in the vehicle.

Participants: Vehicle mechanic/ electrician and automotive engineer with limitedknowledge of the field of vehicle-electric system/electronic system.

Prerequisite: Knowledge of ESI [tronic] and Bosch tester application

Course Content: ‒ Ohm’s law as well as electro-technical basics.‒ Design and mode of operation of electrical systems. ‒ Measurement of electrical systems with different measurement ‒ Devices such as multimeter, ammeter, voltmeter as well as well as engine tester. ‒ Understanding the Simple electronic circuits/ components ‒ Practical implementation of theoretical knowledge by measurement exercises directly on the vehicle. ‒ Understanding and trouble shooting of the wiring system on the Vehicle.

Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.

Course Code: BCCE (Body – and comfort and convenience electronics) – Expert Module

Duration: Three days.

Participants: Vehicle mechanic/electrician/motor mechatronic engineer. Automotive engineer/master mechanic with good knowledge for application of ESI(tronic) & Bosch testing devices KTS.

Prerequisite: Safe dealing with diagnosis device KTS and ESI (tronic).

Course Content: Safety specifications and workplace instructions dealing with airbag & air conditioners. Overview of Bosch airbag systems. Assembly and functioning of passive safety systems. Airbag module (driver, passenger window pad ), sensor technology of restraint systems. Additional functions such as roll-over protection, safety battery terminal, active head restraint, diagnostics and repair possibilities with ESI(tronic) and KTS. Installation and functioning of air Conditioner and components. Components of hydraulic circuits for throttle and expansion valve. Assembly and function of air-condition control. Components of air conditioner control such as switch, sensor, actuator motor & control unit. Testing of systems in the vehicle with help of ESI (tronic) , CAS/CAS(plus) KTS 550/570 Developing diagnostic strategies and detection of diagnosis possibilities Primarily in complete system of vehicle. Practical operation in vehicles which are equipped with the above mentioned systems.

Place: BTC (Naganathapura, Bangalore).

Page 22: Automotive Aftermarket Training Calender 2011

22

Course Code: CAN (Automotive Networking) – Expert Module

Duration: One day.

Objective: Understanding the set-up and functions of the networkedSystems in the vehicle and their testing possibilities.

Participants: Motor mechanic with knowledge of vehicle electric/ electronicSystem/ automotive engineer / Vehicle Electrician

Prerequisite: Safe dealing with diagnosis device KTS and ESI (tronic).

Course Content: ‒ Principle set-up of CAN database ‒ Design and differences of different bus systems. ‒ CAN protocol set-up ‒ Network – topology ‒ Do’s & Don’t’s CAN system ‒ Display measurement possibilities using KTS

Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.

Course Code: EPSV (Electronic Power Steering) – Advanced Module

Duration: Two days.

Objective: Independent execution of diagnostics / repair and maintenancework in Electronic Power steering.

Participants: Vehicle Mechanic/ Electrician/ Automotive engineer/ Master mechanic with good knowledge for application of ESI(tronic) & Bosch testing devices KTS.

Prerequisite: Knowledge of training course ESI[tronic] and Bosch tester application

Course Content: ‒ Basic knowledge on mechanical steering system‒ Basic knowledge on steering geometry ‒ Limitation in mechanical steering system ‒ Inspection of mechanical components ‒ Overview of EPS and components ‒ Different EPS modules ‒ Self diagnosis on vehicle ‒ Trouble / testing of the components using KTS

Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.

Course Code: MTS&A (Measurement, testing of sensors and Actuators)

– Advanced Module

Duration: Two days.

Objective: Basic knowledge base for specific diagnosis of faults in vehicle with main focus on safe and effective handling of various systems in the vehicle.

Participants: Motor mechanic/motor electrician/motor mechatronicengineer/ automotive engineer.

Prerequisite: Knowledge of ESI[tronic] and Bosch tester application

Course Content: ‒ Summary of diagnosis with measuring devices such as‒ Multimeter ‒ Engine tester KTS ‒ Dealing with electrical circuits ‒ Sensors & Actuators in following systems ‒ MPFI system ‒ Common-Rail-System ‒ Ignition (Distributor type & Distributor less – Electronic) ‒ Explanation and evaluation of different output-and input signals. ‒ Independent operation with ESI(tronic), KTS, multimeter.

Place: RTCs and LTCs.

Page 23: Automotive Aftermarket Training Calender 2011

23

Course Code: EBM (Electrical battery management and electrical on-board supply charging systems) – Advanced Module

Duration: Two days.

Objective: Independent execution of testing and maintenance workin the vehicle on different systems

Participants: Motor mechanic/motor electrician / automotive engineer with good technical knowledge and knowledge of electronic system.

Prerequisite: Safe dealing with diagnosis device KTS and ESI (tronic).

Course Content: Design & mode of operation of following systems‒ Testing of generators ‒ Testing of starters ‒ New generators ‒ Signals from modern generators DFM, W,S ‒ Start / Stop system ‒ Testing and Maintenance of Battery Practical work on vehicles which are equipped with the above mentioned Systems.Testing of systems in the vehicle with the help of ESI (tronic). CAS/CAS (plus) and KTS.

Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.

Course Code: EXS (Exhaust system & after-treatment in passenger car) – Expert Module

Duration: Two days.

Objective: Independent fault detection of faults in exhaust system in passenger car.

Participants: Motor mechanic/ motor electrician / Automobile Engineer knowledgein the field of Gasoline/ Diesel System

Prerequisite: Technical knowledge of the Basic fundamentals of Gasoline & Diesel engine management system. Practical experience in application of ESI (Tronic) as well as in handling KTS is advantageous.

Course Content: ‒ Emission norms ( BS I…IV)‒ Exhaust gas in the Gasoline & Diesel engine. ‒ Lamda Sensor & NOx sensor measuring principle, types, testing possibilities, Do’s & Dont’s. ‒ Possibilities for the after treatment of exhaust gas in the passenger car Testing of Components and systems by applying KTS in connection with ESI(tronic) and Bosch Emission testing equipments in the passenger car.

Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.

Course Code: CRSD (Diagnosis of Bosch Common Rail Systems passenger car)

– Advanced Module

Duration: Two days.

Objective: Understanding the functions of ECU Self diagnostics of CRS.Specific detection of faults in Bosch passenger Car Common Rail systems.

Participants: Motor mechanic/ Motor electrician/ Automobile Engineer/ Master Mechanic with practical experience in the field of automotive diesel system and vehicle diagnostics.

Prerequisite: Safe dealing with diagnosis device KTS and ESI (tronic). Technical knowledge of “Common Rail system”.

Course Content: Design and functions of different Bosch Common Rail Generations. Sequence and operating modes of diagnosis Software as well as individual test functions with Bosch Diagnostic tester KTS. Diagnostic strategies and specific detection of faults as Well as fault rectification Testing of Low pressure / High pressure circuit using Bosch Diesel set 1 & 3. Testing of Back flow using Injector return flow measuring device.

Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.

Page 24: Automotive Aftermarket Training Calender 2011

24

Course Code: VM (Vehicle mechanic - Passenger Car) – Advanced Module

Duration: Four days.

Objective: Fault detection and rectification of faults in suspension, Steering geometry, Clutch system, Different sub systems (cooling, intake, exhaust, lubrication & main components) of the engine.

Participants: Basic training for motor mechanic/ Automobile Engineer

Course Content: ‒ Design and mode of operation of individual assemblies of engine mechanics, like crankshaft drive, valve train, variable valve control, engine lubrication and engine cooling. ‒ Evaluation of engine mechanics by suitable testing Procedure especially compression test, pressure loss test . ‒ Repair and diagnostics of individual components of clutch (e.g. dual mass flywheel and self-adjusting clutch) ‒ Diagnostics and adjustment of modern chassis and its individual Components such as shock absorber, suspension and assisted Steering systems. ‒ Requirements for wheel and tire, Wheel balancing ‒ Introduction TPMS ( Tire pressure monitoring system) ‒ Practical work on vehicles

Place: BTC (Naganathapura, Bangalore) and RTCs.

Course Code: BRM (Mechanical Braking) – Basic Module

Duration: Two days.

Objective: Understanding the Basic mechanical braking system, components,inspecting and testing.

Participants: Basic training for motor mechanic/ Automobile Engineer

Course Content: ‒ Fundamentals of braking system‒ Different type of brake system ( mechanical , hydraulic , air ) ‒ Different brake system circuits ‒ Familiarization of brake system components and its function ‒ Inspection and testing of the main components of the brake system ‒ Removal & replacement method for brake pad , cylinders etc.. ‒ Measurements : Wheel hub, Brake disc, wear test , Pressure test ‒ Classification of Brake fluids and importance ‒ Brake bleeding ‒ Brake pedal setting ‒ Trouble shooting instruction

Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.

Course Code: BRE (Electronic Braking system) – Advanced Module

Duration: Two days.

Objective: Understanding the Anti Lock braking system, components,inspection, trouble shooting & testing.

Participants: Basic training for motor mechanic/ Automobile Engineer

Course Content: ‒ Limitations of Mechanical braking system‒ Introduction & advantage of ABS ‒ Understanding Braking force, coefficient of friction ‒ Understanding the braking force in different road conditions ‒ Location and function ABS components ‒ Understanding of different type of wheel speed sensors. ‒ Function of Bosch ABS system : ABS 2S, ABS 2E, ABS 5.0, ABS 8.0 in the areas of hydraulics and electricals ‒ Understanding the Wiring diagram of ABS. ‒ ABS : Self diagnosis & SIS on car using KTS, Guided trouble shooting ‒ ABS Bleeding ‒ Repair & Safety instructions ‒ Introduction to TCS / ESP

Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.

Page 25: Automotive Aftermarket Training Calender 2011

25

Course Code: BP

Duration: One day.

Objective: To make participants competent in dealing with Bosch Brake Pads.

Participants: BCS Personnel, Bosch Authorised Product Stockists, Bosch Authorised Stockists dealing in Brake Pads.

Course Contents: Working principle of Disc Brakes and FABs of Bosch Brake Pads.

Place: RTCs/LTCs.

Course Code: DG

Duration: Two days.

Objective: To make participants competent in handling Advanced Diagnostic Equipment like KTS, BAT and other Test Equipment.

Participants: Personnel employed with Bosch Authorised Workshops and BCS.

Course Contents: Diagnosis on Vehicles using KTS, BAT and other Test Equipment.

Place: RTCs.

Page 26: Automotive Aftermarket Training Calender 2011

26

Training Centres

M.C. PantWest

T. NagarajBangalore

Rengaraj S.Bangalore

K. VishnuprasadBangalore

Parag KavthekarNorth

Tejas PatelEast

Y.H. SrinivasaBangalore

K. AravindSouth

Venkatesha G. G.Bangalore

BTC - Bosch Training Centre

Naganathapura, Bangalore.

RTCs - New Delhi, Kolkata,

Mumbai and Chennai.

LTCs - Chandigarh, Jaipur, Lucknow,

Guwahati, Raipur, Indore,

Ahmedabad, Hubli and Secunderabad.

Page 27: Automotive Aftermarket Training Calender 2011

27

Accommodation and Transport – Bangalore At Hosur Road between Bosch, Adugodi and Naganathapura Plant

1. Krishna RoomsNo. 77, Hosur Main Road Near Ayyappa Temple, Madiwala Bangalore - 560 068 Ph.: 2552 5723/24/25

*Tariff:Rs. 995 + Tax (Double, Non-AC), Rs. 1650 + Tax (Double, AC)

Other hotels in the city:

1. Brindavan HotelM.G. Road Bangalore - 560 001 Ph.: 2558 4000

**Tariff:Rs. 624 (Single, Non-AC), Rs. 780 (Double, Non-AC), Rs. 1116 (Single, AC), Rs. 2475 (Double, AC)

2. Hotel Gautam17, Museum Road Bangalore - 560 001 Ph.: 2558 8764

**Tariff:Rs. 600 (Single, Non-AC), Rs. 800 (Double, Non-AC)

3. Hotel Harsha Shivajinagar Bangalore - 560 051 Ph.: 2286 5566

**Tariff: Rs. 4500 (Single, AC Deluxe), Rs. 5000 (Double, AC Deluxe)

4. Hotel Prashanth21, East Tank Bund Road Bangalore - 560 009 Ph.: 2287 4041

*Tariff: Rs. 450 + Tax (Single, Non-AC), Rs. 600 + Tax (Double, Non-AC), Rs. 850 + Tax (Double, AC)

5. Sri Ramakrishna LodgeSubedar Chatram Road Bangalore - 560 009 Ph.: 2226 3042

**Tariff:Rs. 310 (Single, Non-AC), Rs. 590 (Double, Non-AC)

6. Woodlands Hotel 5, Sampangi Tank Road Bangalore - 560 025 Ph.: 2222 5111

*Tariff: Rs. 1900 + Tax (Double, Non-AC), Rs. 2200 + Tax (Non-AC, Deluxe), Rs. 3100 + Tax (AC, Deluxe), Rs. 3000 (Executive Room), Rs. 3900 + Tax (AC Cottages)

7. Hotel Ajantha22-A, M.G. Road Bangalore - 560 001 Ph.: 2558 4321

**Tariff:Rs. 510 (Single, Non-AC), Rs. 795 (Double, Non-AC), Rs. 1230 (Deluxe Room), Rs. 1400 (Cottage Room)

Bosch Limited

Bosch Training Centre

Naganathapura Plant

Electronic City P.O.

Post Box No. 6887, Bangalore - 560 100

Ph.: (080) 4103 5541/2/3/0

Telefax: (080) 2852 1239/2852 1608

E-mail: [email protected]

[email protected]

[email protected]

8. HotelSunflower129, Brigade Road Bangalore - 560 025 Ph.: 2557 1945

**Tariff:Rs. 700 (Double, Non-AC), Rs. 1200 (Double, AC)

Transportation There are frequent bus services at intervals of 30 min. from all the three major bus stations in Bangalore to Nagnathapura.

Given below is a list of bus numbers from each bus station.

From K.R. Market Bus No. 346J

From Majestic (Kempe Gowda Bus Station/ Central Bus Station) Bus No. 347F

From Shivaji Nagar Bus No. 347G

Note: The hotel rates mentioned are only indicative. Tariffs may vary. * Rates exclusive of taxes ** Rates inclusive of taxes

Page 28: Automotive Aftermarket Training Calender 2011

28

The 2011 Training Course Schedule –Bangalore – Schedule 1

Month

Date

Jan Feb Mar Apr May Jun July Aug Sept Oct Nov Dec

1 OES (E) EP - P (E) EP - P (E) EP - 4 (H)

2 OES (E) EP - P (E) CR - 1 (H) EP - P (E) EP - 4 (H) OES (E)

3 EP - 4 (E) OES (E) EP - P (E) CR - 1 (H) EP - P (E) EP - 4 (H) OES (E)

4 EP - 4 (E) CR - 1 (H) BST (E) EDC - 1 (H) OES (E)

5 EP - 4 (E) EPS (H) BST (E) EDC - 1 (H) OES (E) EP - 4 (H)

6 EDC - 1 (E) EPS (H) BST (E) BST (E) OES (E) EP - 4 (H)

7 EDC - 1 (E) CR - 1 (E) TMSE (E) RLY (H) BST (E) BST (E) OES (E) EP - 4 (H)

8 CR - 1 (E) TMSE (E) RLY (H) BST (E) BST (E) MRS (H) MRS (E) EDC - 1 (H)

9 CR - 1 (E) TMSE (E) TMSS (E) BST (E) MRS (H) MRS (E) EDC - 1 (H)

10 DEF - 2 (E) EDC - 2 (E) TMSE (E) TMSS (E) BST (E) MRS (H) CR - 2 (H) MRS (E)

11 DEF - 2 (E) EDC - 2 (E) TMSE (E) OES (E) TMSS (E) TMSS (E) MRS (H) CR - 2 (H) MRS (E)

12 DEF - 2 (E) OES (E) TMSS (E) TMSS (E) BST (E) CR - 2 (H) TTT (E)

13 OES (E) TMSS (E) EP - 4 (E) TMSS (E) BST (E) EPS (H) TTT (E)

14 BST (E) OES (E) EP - 4 (E) TMSS (E) BST (E) EPS (H) BST (E) TTT (E)

15 BST (E) OES (E) EP - 4 (E) TMSS (E) BST (E) BST (E) TTT (E)

16 BST (E) OES (E) TMSE (E) EDC - 1 (E) DEF - 2 (H) BST (E) BST (E) TTT (E)

17 BST (E) BST (E) TMSE (E) EDC - 1 (E) DEF - 2 (H) TTT (E) BST (E)

18 BST (E) BST (E) DEF - 2 (H) TMSE (E) CR - 2 (E) DEF - 2 (H) TTT (E) BST (E)

19 BST (E) DEF - 2 (H) TMSE (E) CR - 2 (E) EP - 4 (E) TTT (E) OES (E)

20 BST (E) DEF - 2 (H) TMSE (E) DEF (H) CR - 2 (E) EP - 4 (E) TTT (E) OES (E)

21 BST (E) EP - P (E) TTT (E) DEF (H) EDC - 2 (H) EP - 4 (E) TTT (E) EP - P (E) OES (E)

22 EP - P (E) TTT (E) DEF (H) EDC - 2 (H) TTT (E) EDC - 1 (E) EP - P (E)

23 EP - P (E) TTT (E) BST (E) RLY (H) TTT (E) EDC - 1 (E) EP - P (E)

24 RLY (E) EDC - 1 (E) TTT (E) BST (E) RLY (H) TTT (E) EDC - 1 (E)

25 RLY (E) EDC - 1 (E) TTT (E) EP - 4 (H) BST (E) OES (E) TTT (E) EDC - 1 (E)

26 EP - 4 (H) BST (E) OES (E) TTT (E) TTT (E)

27 EP - 4 (H) BST (E) MRS (H) OES (E) TTT (E)

28 MRS (E) EDC - 1 (H) MRS (H) TTT (E) RLY (H)

29 MRS (E) EDC - 1 (H) MRS (H) TTT (E) RLY (H)

30 MRS (E) MRS (H) TTT (E)

31 MRS (E)

Holiday Saturday & Sunday

Page 29: Automotive Aftermarket Training Calender 2011

29

Bangalore – Schedule 2Month

Date

Jan Feb Mar Apr May Jun July Aug Sept Oct Nov Dec

1 CRSD (E) CRSD (E) CRSD (E) CRSD (E)

2 CRSD (E) CRSD (E) BRM (H) CRSD (E) CRSD (E)

3 BCCE (E) EXS (E) EXS (H) BRM (H) CAN (H) EXS (E) CRSD (E)

4 BCCE (E) EXS (E) EXS (H) BRE (H) BCCE (E) EXS (E) CRSD (E) CAN (E)

5 BCCE (E) BRE (H) BCCE (E) CAN (E) EEM (E) CAN (E) EEM - 1 (E)

6 EPSV (E) CAN (H) NEI - 2 (E) BCCE (E) EEM (E) EEM - 1 (E)

7 EPSV (E) BRM (E) VM (H) NEI - 2 (E) EPSV (E) EEM (E) EEM - 1 (E)

8 BRM (E) VM (H) NEI - 2 (E) EPSV (E) VM (E) EBM (E) CRSD (H) EBM (E)

9 VM (H) BCCE (E) VM (E) EBM (E) CRSD (H) EBM (E)

10 NEI - 2 (E) BRE (E) VM (H) BCCE (E) CAN (E) VM (E) VM (E) EXS (H)

11 NEI - 2 (E) BRE (E) NEI - 2 (E) BCCE (E) BCS - 2 (E) VM (E) VM (E) EXS (H)

12 NEI - 2 (E) NEI - 2 (E) EPSV (E) BCS - 2 (E) VM (E) BRM (E) VM (E) NEI - 2 (E)

13 NEI - 2 (E) EPSV (E) VM (E) BCS - 2 (E) BRM (E) VM (E) NEI - 2 (E)

14 EEM - 1 (E) VM (E) VM (E) BCS - 2 (E) BCCE (E) NEI - 2 (E)

15 EEM - 1 (E) VM (E) VM (E) BCS - 2 (E) BRE (E) BCCE (E)

16 EEM - 1 (E) VM (E) BCS - 2 (E) VM (E) BRE (E) BCCE (E)

17 EBM (E) VM (E) BCS - 2 (E) NEI - 2 (E) NEI - 2 (E) EPSV (E)

18 EBM (E) CRSD (E) BCS - 2 (E) BRM (E) NEI - 2 (E) NEI - 2 (E) EPSV (E)

19 CRSD (E) BCS - 2 (E) BRM (E) NEI - 2 (E) BCCE (H) NEI - 2 (E) VM (E)

20 EXS (E) BCS - 2 (E) VM (E) BRE (E) BCCE (H) VM (E)

21 BCS - 2 (E) BCCE (H) EXS (E) VM (E) BRE (E) BCCE (H) BCS - 2 (E) VM (E)

22 BCS - 2 (E) BCCE (H) VM (E) CAN (E) NEI - 2 (E) EPSV (E) BCS - 2 (E) VM (E)

23 BCS - 2 (E) BCCE (H) EEM (E) VM (E) NEI - 2 (E) EPSV (E) BCS - 2 (E)

24 CRSD (E) BCS - 2 (E) EPSV (H) EEM (E) NEI - 2 (E) EEM - 1 (E) BCS - 2 (E)

25 CRSD (E) BCS - 2 (E) EPSV (H) BCS - 2 (H) EEM (E) NEI - 2 (E) EEM - 1 (E) BCS - 2 (E)

26 BCS - 2 (H) EBM (E) NEI - 2 (E) BCS - 2 (H) EEM - 1 (E) BRM (H)

27 BCS - 2 (H) EBM (E) CRSD (E) NEI - 2 (E) BCS - 2 (H) BRM (H)

28 CAN (H) BCS - 2 (H) CRSD (E) BCS - 2 (H) BRE (H)

29 BCS - 2 (H) EXS (E) CAN (H) BCS - 2 (H) BRE (H)

30 EXS (E) BCS - 2 (H) CAN (H) CAN (H)

31

Holiday Saturday & Sunday

Page 30: Automotive Aftermarket Training Calender 2011

30

Accommodation – New Delhi

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

1. Hotel Bhagirath PalaceOpp. Red Fort Chandni Chowk New Delhi - 110 006 Ph.: (011) 2386 6223/2386 6723

2. Wood Inn Hotel8, Local Shopping Centre Kirti Nagar New Delhi - 110 015 Ph.: (011) 2543 8500/2543 9136

3. Vivek Hotel1534 - 50, Main Bazar, Pahar Ganj New Delhi - 110 055 Ph.: (011) 5154 1435/5154 1436

The 2011 Training Course Schedule –

North Region

4. Hotel RegalShyama Prasad Mukherjee Marg New Delhi - 110 006 Ph.: (011) 2394 3999/2397 9115

5. Hotel TouristRam Nagar, Pahar Ganj New Delhi - 110 055 Ph.: (011) 2361 0334-340

6. Rail Yatri NivasNew Delhi Railway Station New Delhi - 110 002 Ph.: (011) 2323 3484

Bosch LimitedBosch Training Centre‘Rishyamook’, 85-A, Panchkuin RoadNew Delhi - 110 001Ph.: (011) 2334 8260-3/2334 7592Mobile: 098713 07355E-mail: [email protected]

Page 31: Automotive Aftermarket Training Calender 2011

31

The 2011 Training Course Schedule –

New DelhiMonth

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1 INS VEH VM NEI - 1 WTY BWSS MTS & A DG

2 WTY VM EXS BWSS MTS & A DG

3 AEL - 1 CRSD VM EXS EEM - 1

4 AEL - 1 CRSD AEL - 1 BRM NEI - 1 EEM - 1

5 AEL - 1 BRM INS EEM - 1 CSM

6 BB BCS - 1 BB INS VM

7 GFI - 1 EEM - 1 BCS - 1 BWSS EPSV INS BRM VM

8 EEM - 1 BB BWSS EPSV BRM VM

9 EEM - 1 CRSD CSM NEI - 1 VM

10 PFR - 2W CRSD AEL - 1 CSM

11 GFI - 1 BP BCS - 1 EEM - 1 AEL - 1

12 BCS - 1 EXS EEM - 1 PFR - 4W PFR - 4W VS

13 BP EXS PFR - 4W EEM - 1 WTY

14 BRM PFR - 4W BB

15 BRM INS

16 DG PFR - 4W

17 DG EPSV DG BB CSM CRSD

18 DG DG EPSV EEM - 1 VEH CRSD CRSD

19 DG EEM - 1 VM CRSD BMR EXS

20 EEM - 1 BB VM BMR

21 EXS BB DG VM BB

22 EXS MTS & A DG WTY VM BCS - 1 BB

23 MTS & A MTS & A DG BCS - 1

24 AEL - 1 AEL - 1 DG MTS & A DG GFI - 1 WTY

25 AEL - 1 AEL - 1 DG WTY BWSS

26 AEL - 1 BWSS MTS & A

27 VS AEL - 1 BB MTS & A

28 BP VEH CSM

29 INS EPSV AEL - 1 BWSS BWSS

30 INS EPSV AEL - 1 BWSS BWSS

31 INS VM

Holiday Saturday & Sunday

Page 32: Automotive Aftermarket Training Calender 2011

32

Accommodation – Chandigarh

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

1. Hotel Deep PalaceSCF - 248, Motor Market Manimazra, Chandigarh Ph.: (0172) 273 1973

Tariff: Rs. 150 (Standard Single, Air Cooled), Rs. 200 (Standard Double, Air Cooled), Rs. 350 (AC)

2. Hotel Chander PalaceSCO - 453 - 454 Near Dhillon Complex Motor Market, Manimazra Chandigarh Ph.: (0172) 273 4152

Tariff:Standard AC Room: Rs. 300 (Twin-sharing basis) Rs. 400 (Single, Deluxe)

3. Hotel Indian PalaceSCF - 13 - 14, Motor Market Manimazra, Chandigarh Ph.: (0172) 273 9994

Tariff: Rs. 350 (Single Standard, Air Cooled), Rs. 450 (Double, Standard AC), Rs. 650 (Double, Deluxe AC)

Note: The hotel rates mentioned are only indicative and exclusive of taxes.

Tariffs may vary.

Bosch LimitedLocal Training Centre (LTC)C/o Jaeco DieselsSCF 344-345New Motor Market, Manimajra Chandigarh - 160 101

Page 33: Automotive Aftermarket Training Calender 2011

33

The 2011 Training Course Schedule –

Chandigarh Month

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1 EEM - 1 BB

2 EEM - 1 VEH VE - 2 GFI - 1

3 EEM - 1 VE - 2 GFI - 1 WTY VE - 2

4 INS VE - 2 NEI - 1 WTY

5 AEL - 1 MTS & A INS

6 AEL - 1 MTS & A

7 EXS AEL - 1 BWSS AEL - 1

8 EXS AEL - 1 EEM - 1 BWSS AEL -1 CSM WTY

9 VE - 2 EEM - 1 EXS

10 GFI - 1 VE - 2 BCS - 1 EEM - 1 EXS

11 BCS - 1 CSM

12 EXS INS NEI - 1

13 EXS INS AEL - 1

14 INS VE - 2 AEL - 1 BB

15 VE - 2 PFR - 4W BCS - 1 VEH

16 PFR - 4W BCS - 1 BB

17 DG DG EXS

18 DG DG BB PFR - 4W CSM EXS

19 BP BB

20 BB BB BWSS

21 AEL - 1 MTS & A DG BWSS BWSS MTS & A

22 AEL - 1 MTS & A DG BP MTS & A BWSS MTS & A

23 VE - 1 MTS & A

24 DG VE - 1 WTY INS

25 DG DG INS

26 BP EEM - 1 DG GFI - 1

27 VE - 1 WTY EEM - 1

28 VE - 1 BB INS EEM - 1 BP EEM - 1

29 BB BWSS EEM - 1

30 BWSS EEM - 1

31

Holiday Saturday & Sunday

Page 34: Automotive Aftermarket Training Calender 2011

34

Accommodation – Jaipur

All the participants are advised to arrange their own accommodation as required. Given below is a recommended hotel:

1. Hotel BroadwaysTransport Nagar, Agra Road, Jaipur Ph.: (0141) 511 2010/11, 264 1275

Tariff:Rs. 300 (Twin-sharing basis)

Note: The hotel rates mentioned are only indicative and exclusive of taxes.

Tariffs may vary.

Bosch LimitedLocal Training Centre (LTC)C/o Arora Diesels Akash Deep BuildingA-5, Transport Nagar Jaipur - 302 004

Page 35: Automotive Aftermarket Training Calender 2011

35

The 2011 Training Course Schedule –

JaipurMonth

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1 DG BP VE - 1 BRM CAN VE - 2

2 DG VE - 2 MTS & A VE - 1 BRM VE - 1 VE - 2

3 VE - 2 VE - 2 MTS & A VE - 1

4 INS OECD VE - 2 VE - 2 PE - 1

5 EXS VE - 2 VEH VE - 2 PE - 1

6 VE - 2 VE - 1 EXS CAN VE - 2 BB

7 VE - 2 WTY EPS VE - 1 DG EXS BP

8 EPS DG EXS EXS AEL - 1

9 VE - 1 NEI - 1 EPSV INS EXS AEL - 1

10 VE - 1 EPSV DG

11 BB AEL - 1 AEL - 1 DG

12 WTY AEL - 1 BB BB AEL - 1 AEL - 1 BP

13 AEL - 1 AEL - 1

14 AEL - 1 AEL - 1 CMS AEL - 1 EPSV AEL - 1 INS CSM

15 AEL - 1 BB AEL - 1 EPSV AEL - 1 CSM WTY

16 CAN INS BB

17 MTS & A EXS OECD

18 NEI - 1 MTS & A EXS OECD BB VEH BCS - 1 IE

19 IE CSM BCS - 1 EPSV

20 EEM - 1 WTY EEM - 1 OECD EPSV

21 GFI - 1 VEH EEM - 1 BCS - 1 EEM - 1 WTY

22 BB EEM - 1 BCS - 1 EEM - 1 BCS - 1 MTS & A MTS & A GFI - 1

23 BCS - 1 INS PE FO BCS - 1 MTS & A MTS & A

24 INS BCS - 1 PE

25 WTY PE CSM

26 VE - 2 BRM NEI - 1 VE - 2

27 VE - 2 BRM BB VE - 2

28 CSM INS AEL - 1

29 BB AEL - 1 INS WTY GFI - 1

30 VEH IE INS

31 INS NEI - 1 BB

Holiday Saturday & Sunday

Page 36: Automotive Aftermarket Training Calender 2011

36

Accommodation – Lucknow

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

1. Hotel AadharshilaVIP Road, Alambagh, Lucknow Ph.: (0522) 246 0550

Tariff:Rs. 550 (Standard), Rs. 650 (Semi Deluxe), Rs. 850 (AC, Deluxe)

2. Hotel RangoliNear Hardoi Bus Stand, Charbagh Lucknow Ph.: (0522) 263 5926/263 5902/263 5293

Tariff:Rs. 250 (Air Cooled, Single Bed), Rs. 450 (Air Cooled, Double Bed), Rs. 650 (Single Bed, AC Deluxe), Rs. 90 (Dormitory)

Bosch LimitedLocal Training Centre (LTC)C/o Raman DieselsD-1, Transport NagarLucknow - 226 012

3. Hotel PoojaCharbagh, Lucknow Ph.: (0522) 245 7525

Tariff:Rs. 200 (Single Bed, Attached Bathroom), Rs. 250 (Double Bed, Attached Bathroom)

Note: The hotel rates mentioned are only indicative and exclusive of taxes.

Tariffs may vary.

Page 37: Automotive Aftermarket Training Calender 2011

37

The 2011 Training Course Schedule –

LucknowMonth

DateJan Feb Mar April May June July August Sept Oct Nov Dec

1 WTY

2 BP CRSD VEH

3 WTY CRSD CRSD VE - 1 MTS & A

4 BB CRSD VE - 1 AEL - 1 VE - 2 VE - 1 MTS & A

5 VE - 1 AEL - 1 VE - 2 PFR - 4W EEM - 1 VE - 2

6 VE - 1 PE BCS - 1 EEM - 1 CRSD VE - 2

7 VE - 1 STU - 1 FO PE BCS - 1 BB EEM - 1 CRSD BB

8 STU - 1 PE NEI - 1 CAN BB BB

9 EEM - 1 VE - 2 VE - 2

10 AEL - 1 EEM - 1 VE - 2 VE - 2 OECD AEL - 1 AEL - 1

11 AEL - 1 EEM - 1 NEI - 1 CAN VE - 1 AEL - 1 AEL - 1

12 WTY VE - 1 MTS & A AEL - 1

13 BCS - 1 IE BRM INS MTS & A BCS - 1 AEL - 1

14 BCS - 1 VE - 1 STU - 2 BRM AEL - 1 BCS - 1 BMR

15 VE - 1 STU - 2 OECD AEL - 1 FO BMR VE - 1

16 OECD VE - 1 OECD VE - 1

17 IE NEI - 1 BB VE - 1 WTY OECD

18 EEM - 1 OECD WTY

19 GFI - 1 EEM - 1 BB INS WTY OECD BB

20 PFR - 4W EEM - 1 INS

21 VE - 2 EPSV PER - 4W NEI - 1 INS INS BCS - 1

22 VE - 2 EPSV VE - 2 VE - 1 VE - 2 BCS - 1

23 NEI - 1 INS NEI - 1 INS VE - 2 VE - 1 VE - 2

24 PE CAN

25 WTY CAN OECD MTS & A VE - 1 BCS - 1 PE VE - 2 INS

26 MTS & A VE - 1 BCS - 1 PE OECD VE - 2

27 BRE CRSD

28 BRE OECD IE INS CRSD BB VEH VEH

29 OECD VEH NEI - 1 VE - 1

30 AEL - 1 NEI - 1 INS VE - 1

31 AEL - 1 NEI - 1 NEI - 1

Holiday Saturday & Sunday

Page 38: Automotive Aftermarket Training Calender 2011

38

The 2011 Training Course Schedule –

South Region

1. Sri Ramakrishna NivasNo. 1, Woods Road, Annasalai, Chennai - 600 002 Ph.: (044) 2860 3329 2860 2154

2. Regency Golden Sun HotelNo. 1, Hanumanth Rao Street T. Nagar, Chennai - 600 017 Ph.: (044) 2828 2772

3. Rohini InternationalNo. 67, G.N. Chetty Road, T. Nagar Chennai - 600 017

Accommodation – Chennai

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

Bosch LimitedBosch Training CentreBlossom CentreOld No. 27, New No. 30, North Boag RoadT. Nagar, Chennai - 600 017Ph.: (044) 2815 3916/2815 3917Mobile: 091766 40990E-mail: [email protected]

4. Royal Guest HouseOld No. 26, New No. 4, Boobegam Street,Chennai - 600 002Ph.: (044) 2861 1044, 45

Tariff :Rs. 250 (Single room)Rs. 350 (Double room)

5. Sarvana LodgeNext to Hotel Sarvana Bhavan,T. Nagar, Chennai - 600 017

Tariff :Rs. 280 (Single room)Rs. 350 (Double room)

Page 39: Automotive Aftermarket Training Calender 2011

39

The 2011 Training Course Schedule –

ChennaiMonth

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1

2

3

4

5 NEI - 1

6 NEI - 1 AEL - 1

7 AEL - 1 GFI - 1 GFI - 1

8 BST GFI - 1 BCS - 1 EXS PFR - 4W

9 BST BB PE BCS - 1 EXS PFR - 4W

10 AEL - 1 DG EDC PE STU - 1 BST

11 AEL - 1 IE EDC VE - 2 PE BST STU - 1 BST

12 VE - 1 VE - 2 IE BST EDC AEL - 1

13 VE - 1 BB AEL - 1 EDC BB AEL - 1

14 BB EEM - 1 AEL - 1 VE - 2 BB

15 EEM - 1 PFR - 4W OEM BB PFR - 2W VE - 2 EDC

16 EEM - 1 STU - 1 PFR - 4W VE - 1 OEM VE - 1 PFR - 2W EDC

17 STU - 1 VE - 1 VE - 1 VE - 1 PFR - 2W

18 STU - 1 WTY WTY PFR - 4W WTY VE - 1 PFR - 2W

19 STU - 1 BST PFR - 4W BCS - 1 VE - 1

20 EBM BST EDC BCS - 1 WTY VE - 1

21 PFR - 4W OECD EBM EDC BB WTY

22 PFR - 4W BCS - 1 AEL - 1 STU - 1

23 NEI - 1 STU - 2 WTY BCS - 1 AEL - 1 STU - 1

24 STU - 1 NEI - 1 STU - 2 GFI - 1 NEI - 1 NEI - 1 BRM

25 STU - 1 STU - 1 NEI - 1 NEI - 1 BRM

26 STU - 1 OEM NEI - 1

27 NEI - 1 STU - 1 OEM NEI - 1

28 BCS - 1 NEI - 1 STU - 1

29 BCS - 1 CRSD

30 CRSD

31

Holiday Saturday & Sunday

Local Holidays

Page 40: Automotive Aftermarket Training Calender 2011

40

Accommodation – Hubli

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

1. The Hans HotelP.B. Road, Vidyanagar Hubli - 580 031 Ph.: (0836) 237 4770

2. Hotel CanaraP.B. Road, Hosur Hubli - 590 021 Ph.: (0836) 237 2561

3. Hotel ChalukyaClub Road Hubli - 590 021 Ph.: (0836) 235 4234

4. Hotel AmbeshOpp. Mirjankar Petrol Pump P.B. Road Hubli - 590 021 Ph.: (0836) 227 2378

5. Hotel AyodyaOpp. Old Bus Stand Hubli - 590 021 Ph.: (0836) 235 1951

Bosch LimitedLocal Training Centre (LTC)C/o Manickbagh Diesels Baddi Building Unkal Cross, P.B. RoadHubli - 580 031

Page 41: Automotive Aftermarket Training Calender 2011

41

The 2011 Training Course Schedule –

HubliMonth

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1

2

3

4

5

6

7

8

9

10

11

12 VE - 1 VE - 2 VE - 2

13 VE - 1 VE - 2 VE - 2

14 BB BB VE - 1 VE - 2

15 VE - 2 VE - 2 PFR - 4W VE - 1 VE - 2

16 AEL - 1 VE - 2 WTY VE -2 VE - 1 BB WTY

17 AEL - 1 WTY WTY VE - 1

18 BB VE - 1 AEL - 1 VE - 1 BB NEI - 1

19 PE VE - 1 AEL - 1 VE - 1 WTY AEL - 1 NEI - 1 AEL - 1

20 PE BB PFR - 4W BB AEL - 1 NEI - 1 AEL - 1

21 PE WTY NEI - 1 NEI - 1 NEI - 1

22 NEI - 1 BB NEI - 1 NEI - 1 VE - 1 NEI - 1 NEI - 1

23 NEI - 1 NEI - 1 NEI - 1 VE - 1 NEI - 1

24 NEI - 1 STU - 1 NEI - 1 NEI - 1

25 NEI - 1 STU - 1 NEI - 1 NEI - 1 NEI - 1 STU - 1 PFR - 4W

26 NEI - 1 NEI - 1 STU - 1 NEI - 1

27 NEI - 1 NEI - 1 STU - 2 NEI - 1 NEI - 1 STU - 2

28 NEI - 1 NEI - 1 NEI - 1 STU - 2 NEI - 1 STU - 2

29 NEI - 1

30

31

Holiday Saturday & Sunday

Local Holidays

Page 42: Automotive Aftermarket Training Calender 2011

42

Accommodation – Secunderabad

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

1. Rajadhani LodgePlot No. CFZ/S-13A & B Auto Nagar Vijayawada Highway Hyderabad - 500 070 Ph.: (040) 2412 3434

2. Taj Mahal HotelPatny Centre Secunderabad - 500 003 Ph.: (040) 2781 2106

3. Hotel BaseraS.D. Road Secunderabad - 500 004 Ph.: (040) 2770 3200

Bosch LimitedLocal Training Centre (LTC)C/o Secunderabad Engg. Corp.Plot No. 6, Block No. 11Autonagar, Hyderabad - 500 070

Page 43: Automotive Aftermarket Training Calender 2011

43

The 2011 Training Course Schedule –

SecunderabadMonth

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1

2

3

4

5

6 PE NEI - 1

7 PE NEI - 1

8 WTY PE

9 PE BB VE - 1

10 PE VE - 1 VE - 1

11 PE VE - 2 BB VE - 1

12 VE - 2 WTY BB PFR - 4 W

13 VE - 1 BB AEL - 1 PFR - 4 W BB

14 AEL - 1 VE - 1 PFR - 4 W AEL - 1 VE - 2 AEL - 1

15 AEL - 1 AEL - 1 NEI - 1 PFR - 4 W VE - 2 AEL - 1

16 AEL - 1 WTY NEI - 1 NEI - 1

17 VE - 2 WTY AEL - 1 NEI - 1

18 VE - 2 BB AEL - 1

19 VE - 1 PFR - 4 W WTY PE

20 VE - 1 PFR - 4 W PE

21 BB PE PFR - 4 W PE

22 PE PFR - 4 W STU - 2 STU - 1 STU - 2

23 PE STU - 2 STU - 1 STU - 2

24 AEL - 1 STU - 1

25 AEL - 1 STU - 2 STU - 1

26 STU - 2 STU - 1

27 STU - 1 STU - 2 STU - 1

28 STU - 1 STU - 2

29

30

31

Holiday Saturday & Sunday

Local Holidays

Page 44: Automotive Aftermarket Training Calender 2011

44

The 2011 Training Course Schedule –

East Region

Accommodation – Kolkata

All the participants are advised to arrange their own accommodation as required. Given below is a recommended hotel:

1. Hotel Capella49, R.A. Kidwai Road, Kolkata - 700 016 Ph.: (033) 2229 4365/224 98921

Tariff: Rs. 395 (Single), Rs. 450 (Single room, Twin-sharing basis), Rs. 775 (Double room, Shared by 4)

Note: The hotel rates mentioned are only indicative and exclusive of taxes.

Tariffs may vary.

Bosch LimitedBosch Training CentrePost Box No. 9044, 91-A, Park Street, Kolkata - 700 016 Ph.: (033) 2217 2144/2217 5222Mobile: 097487 64392E-mail: [email protected]

Page 45: Automotive Aftermarket Training Calender 2011

45

The 2011 Training Course Schedule –

KolkataMonth

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1

2

3 STU - 2 WTE - 1

4 EEM - 1 STU - 2 WTE - 1

5 EEM - 1

6 EEM - 1 VE - 1

7 AEL - 1 BCS - 1 VE - 1

8 AEL - 1 DEF - 1 BCS - 1 AEL - 1

9 BCS - 1 NEI - 1 BST DEF - 1 PFR - 4W AEL - 1

10 BCS - 1 DG INS BST OECD PFR - 4W

11 AEL - 1 WTY DG EBM VE - 2 WTY DG PFR - 2W

12 AEL - 1 EBM VE - 2 BB DG CRSD

13 WTY PFR - 4W BB VE - 1 NEI - 1 CRSD

14 AEL - 1 PFR - 4W EBM VE - 1 INS CSM CECD

15 STU - 1 MTS & A AEL - 1 WTY EBM CSM CSM DG

16 STU - 1 MTS & A BCS - 1 FO CRSD CSM FO DG

17 PFR - 4 W VE - 1 EXS BCS - 1 OECD CRSD EEM - 1 DEF - 1

18 PFR - 4 W VE - 1 EXS PE VE - 2 DG EEM - 1 DEF - 1

19 PE CRSD PE VE - 2 DG EEM - 1

20 PE CRSD PE AEL - 1 BWSS GFI - 1 VE - 2

21 PE BRM VE - 1 DEF - 1 AEL - 1 BWSS VE - 2 BST EEM - 1

22 BRM VE - 1 DEF - 1 DG WTE - 1 BST EEM - 1

23 OECD PFR - 2W VE - 1 DG EXS BST EEM - 1

24 BWF VE - 1 GFI - 1 EXS AEL - 1

25 BB EBM MTS & A AEL - 1

26 BST EBM MTS & A PE

27 DG BST BST PE

28 DG BST WTE - 1 BST BST PE

29 BST WTE - 1 BST

30 BST

31

Holiday Saturday & Sunday

Page 46: Automotive Aftermarket Training Calender 2011

46

Accommodation – Guwahati

All the participants are advised to arrange their own accommodation as required. Given below is a recommended hotel:

Bosch LimitedLocal Training Centre (LTC)C/o Guwahati Diesels A.T. RoadGuwahati - 781 001

1. Hotel Shyam SaroverNear Ram Mandir, A.T. Road Guwahati - 781 001 Ph.: (0361) 251 1577/254 1611

Tariff: Rs. 100

2. Mayur HotelPaltan Bazar, Guwahati-781008Opp. ASTC Bus Stand Ph.: 0361-2734855/56/57/58/59/60/61 0361-2739603/20/25

Tariff: Rs. 160 (Single Economy)Rs. 200 (Single Standard)Rs. 290 (Single Deluxe)Rs. 600 (Single Super Deluxe)Rs. 299 (Double Economy)Rs. 400 (Double Deluxe)Rs. 700 (Double Super Deluxe)Rs. 800 (Double Special Deluxe)Rs. 900 (Double Executive)Rs. 1200 (Double Premium)Rs. 1000 (Junior Suit)Rs. 1300 (Semi Suit)

3. Hotel EdenOpp. Bengali H. S. school,G.S. Road, Paltan Bazar, Guwahati -781008 Ph.: 0361-2739578,2639963

Tariff: Rs. 300 (Single Deluxe)Rs. 550 (Single Deluxe)Rs. 650 (Single Deluxe / AC)Rs. 1000 (Double Deluxe / AC)

4. Hotel RialtoGNB Road, Paltan Bazar,Guwahati - 781001 Ph.: 0361-2131210, 2734450

Tariff: Rs. 1800 (Executive)Rs. 1500 (Deluxe)Rs. 1000 (Standard)

5. Hotel Hornbill Md Shah Road, Paltan Bazar,Guwahati - 781008 Ph.: 0361-2735401

Tariff: Rs. 1400 (Single Deluxe) & Rs. 1600 (Double Deluxe)Rs. 1600 (Single Luxury) & Rs. 2000 (Double Luxury)Rs. 2200 (Single Executive) & Rs. 2600 (Double Executive)Rs. 3600 (S Hornbill Suit) & Rs. 3600 (D Hornbill Suit)Rs. 9500 (S President Suit) & Rs. 9500 (D President Suit)

Note: The hotel rates mentioned are only indicative and exclusive of taxes.

Tariffs may vary.

Page 47: Automotive Aftermarket Training Calender 2011

47

The 2011 Training Course Schedule –

GuwahatiMonth

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1

2

3

4 VE - 1

5 VE - 2 VE - 1 VE - 2 PE VE - 2

6 AEL - 1 VE - 2 OECD PFR - 4W VE - 2 PE VE - 2

7 VE - 1 CSM AEL - 1 OECD PFR - 4W BWF PE AEL - 1

8 VE - 1 CSM PFR - 2W FO PFR - 2W NEI - 1 AEL - 1

9 WTE - 1 STU - 1 BWSS NEI - 1 NEI - 1

10 PE WTE - 1 STU - 1 BWSS NEI - 1 DEF - 1

11 PE STU - 1 BCS - 1 WTE - 1 DEF - 1

12 PE STU - 1 BCS - 1 BST DG WTY

13 BB PE DEF - 1 BST DG WTE - 1

14 VE - 2 PE CSM DEF - 1 BB NEI - 1 NEI - 1

15 VE - 2 PE CSM FO BST NEI - 1

16 WTY BB BST

17 PFR-4W BCS - 1 BB OECD

18 PFR-4W BCS - 1 BWSS OECD

19 WTY DEF - 1 BWSS AEL - 1 WTY

20 DEF - 1 AEL - 1 STU - 1

21 STU - 1

22 AEL - 1

23 AEL - 1

24

25

26

27

28

29

30

31

Holiday Saturday & Sunday

Page 48: Automotive Aftermarket Training Calender 2011

48

Accommodation – Raipur

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

1. Gass Memorial CentreOpp. Raipur Diesels Near Jai Stambh Chowk K.K. Road, Moudhapara, Raipur Ph.: (0771) 235 6532

Tariff: Rs. 145 (Single), Rs. 210 (Double)

2. Hotel Usabh PalaceK.K. Road Near Gujarati School, Raipur Ph.: (0771) 503 0824

Tariff: Rs. 250 (Single), Rs. 150 (Double), Rs. 100 (Dormitory)

Note: The hotel rates mentioned are only indicative and exclusive of taxes.

Tariffs may vary.

Bosch LimitedLocal Training Centre (LTC)C/o Raipur DieselsKrishna Kumar RoadRaipur - 492 001

Page 49: Automotive Aftermarket Training Calender 2011

49

The 2011 Training Course Schedule –

RaipurMonth

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1

2 BST

3 BST VE - 2

4 BST VE - 2 VE - 2

5 AEL - 1 VE - 2 AEL - 1

6 DG AEL - 1 VE - 1 PE AEL - 1

7 AEL - 1 PFR - 4W DG VE - 1 PE BWSS WTY VE - 1 AEL - 1

8 AEL - 1 PFR - 4W WTY PE FO BWSS VE - 1 AEL - 1

9 WTY PFR - 2W WTY WTY

10 PE BB DEF - 1

11 PE VE - 2 NEI - 1 VE - 1 DEF - 1

12 PE VE - 2 NEI - 1 VE - 1 VE - 2 OECD NEI - 1

13 NEI - 1 PFR - 2W WTY VE - 2 NEI - 1

14 CSM WTE - 1 PFR - 4W BWF BST PE

15 CSM WTE - 1 PFR - 4W BB BST PE

16 OECD BCS - 1 BST PE

17 VE - 1 FO BCS - 1 AEL - 1

18 VE - 1 DEF - 1 AEL - 1 WTE - 1 AEL - 1

19 PFR - 4W DEF - 1 WTE - 1 AEL - 1 WTE - 1 DG

20 PFR - 4W OECD WTE - 1 NEI - 1 OECD DG

21 VE - 1 AEL - 1 OECD NEI - 1 GFI - 1 VE - 2

22 VE - 1 AEL - 1 BB VE - 2

23 DG

24 DG

25 GFI - 1

26 BST

27 BST BST

28 BST BST

29 BST

30

31

Holiday Saturday & Sunday

Page 50: Automotive Aftermarket Training Calender 2011

50

The 2011 Training Course Schedule –

West Region

1. Shantidoot HotelDr. Ambedkar Road Opp. Hindmata Cinema Dadar (E), Mumbai - 400 014 Ph.: (022) 2416 4923-4

2. Hotel Midtown Pritam20-B, Dharamputra Pritam Estates Dadar (E), Mumbai - 400 014 Ph.: (022) 2414 5555/2414 5959

3. Hotel Regency73, Napean Sea Road Mumbai - 400 006 Ph.: (022) 2369 7700/2363 0002-3

4. Hotel Windsor10, Kumpta Street Ballard Estate Fort Mumbai - 400 038 Ph.: (022) 2261 3071/2261 8321-7

5. Marina Guest House13, Soona Mahal 143, Marine Drive Mumbai - 400 020 Ph.: (022) 2282 1924

6. Mehra Resorts79, Dr. Annie Besant Road Worli, Mumbai - 400 018 Ph.: (022) 2492 5280-1

7. Ritz Hotel Pvt. Ltd.5, Jamshedji Tata Road 3, Churchgate, Mumbai - 400 020 Ph.: (022) 2285 0500, 2283 7623

8. Sea Green Hotel145, Marine Drive Mumbai - 400 020 Ph.: (022) 2282 2294

Accommodation – Mumbai

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

9. Shalimar Hotel Pvt. Ltd.August Kranti Marg Mumbai - 400 036 Ph.: (022) 5664 1000

10. Hotel SunbeamManoj Mandir Apartments Dr. E. Moses Road Adjacent to Geeta Cinema Worli Naka, Mumbai - 400 018 Ph.: (022) 2492 9340

11. Hotel Hill ViewOpp. Campa Cola Factory B.G. Kher Road Worli Naka, Mumbai - 400 018 Ph.: (022) 2493 5630/2496 1858

12. Hotel Rahat PalaceDr. E. Moses Road Next to Geeta Cinema Worli Naka, Mumbai - 400 018 Ph.: (022) 2496 4411-7

Bosch LimitedBosch Training Centre79, Dr. Annie Besant RoadWorli, Mumbai - 400 018Ph.: (022) 2493 2071-4, 2493 0452 Mobile: 99875 64775E-mail: [email protected]

Page 51: Automotive Aftermarket Training Calender 2011

51

The 2011 Training Course Schedule –

MumbaiMonth

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1 AEL - 1 BST

2 AEL - 1 BB EDC BST

3 VE - 1 EBM CAN EDC OEM

4 VE - 1 EBM CAN VE - 1 MTS & A OEM

5 VE - 2 VE - 1 MTS & A EDC EDC

6 VE - 2 BB EDC EDC

7 EDC VE - 1 AEL - 1

8 GFI - 1 EDC GFI - 1 VE - 2 VE - 1 PFR - 4W AEL - 1

9 PFR - 4W BST VE - 2 BB PFR - 4W BB

10 VE - 2 PFR - 4W BST AEL - 1 VE - 2 BCS - 1

11 VE - 2 NEI - 1 BB WTY AEL - 1 VE - 2 BCS - 1

12 EEM - 1 BWF

13 EEM - 1 VE - 1 AEL - 1 AEL - 1

14 EEM - 1 MTS & A VE - 1 AEL - 1 CRSD AEL - 1 VE - 1

15 MTS & A VS WTY CRSD VE - 1

16 BCS - 1 PFR - 4W BWSS

17 BST BCS - 1 PFR - 4W DG WTY BWSS

18 BST PFR - 4W BST DG BRM GFI - 1

19 BST PFR - 4W BST BST GFI - 1 BRM VE - 2

20 BB CRSD CRO BST BST VE - 2

21 WTY VE - 2 CRSD GFI - 1 BRM BST GFI - 1 BWF

22 VE - 2 DG BRM CAN MTS & A WTY

23 PF DG WTY CAN MTS & A NEI - 1

24 DG PF DG VEH PE

25 DG PF DG PE

26 AEL - 1 EBM PE

27 AEL - 1 EBM MTS & A BCS - 1 PFR - 4W

28 NEI - 1 EXS MTS & A BCS - 1 NEI - 1 PFR - 4W

29 INS EXS STU - 2 EXS

30 INS NEI - 1 STU - 2 EXS

31 NEI - 1

Holiday Saturday & Sunday

State Holiday

Page 52: Automotive Aftermarket Training Calender 2011

52

Accommodation – Ahmedabad

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

1. Hotel MoniOpp. Shakti Estate Narol Isanpur Road Ahmedabad

Tariff:Rs. 300 (Single), Rs. 400 (Double)

2. Hotel Prestige Opp. Sai Diesels, Narol Cross Road Near Vijay Transport, Ahmedabad

Tariff:Rs. 250 (Single), Rs. 350 (Double)

3. Hotel EllisBridge,Opp.Town Hall, Ashram Road, AhemadabadPh.: 098240 26530/ 079 2657 5811

Tariff:Rs. 300 to 500 (Single), Rs. 400 to 625 (Double)A/C Rooms at Extra Cost

4. Hotel AtithiOpp. Kasturi Dining Hall, Paldi, AhemadabadPh.: 098250 39809/ 079 2658 2912

Tariff:Rs. 200 to 300 (Single), Rs. 300 to 400 (Double)

Bosch LimitedLocal Training Centre (LTC)C/o Sai Diesel Service 2/A, Geetabhavan Opp. Vijay Transport Near Kashiram Textile Narol, Ahmedabad - 380 005

2. Hotel KapadiyaNear, V. S. Hospital, Opp. Mahak and Building, Ellis BridgePh.: 093270 07923/ 079 2657 9571

Tariff:Rs. 300 (Single), Rs. 400 (Double)Rs. 100 (Dormitory)

2. Hotel GurukrupaEllis Bridge, Behind Town Hall, Ashram RoadPh.: 079 2657 7174

Tariff:Rs. 200 (Single), Rs. 250 (Double)

Note: The hotel rates mentioned are only indicative and exclusive of taxes.

Tariffs may vary.

Page 53: Automotive Aftermarket Training Calender 2011

53

The 2011 Training Course Schedule –

AhmedabadMonth

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1 AEL - 1

2 VE - 2 AEL - 1 ACSS PE AEL - 1

3 VE - 2 AEL - 1 AEL - 1 GFI - 1 PE VE - 2

4 VE - 1 PF AEL - 1 BB VE - 1 PE VE - 2

5 VE - 1 PFR - 4W VE - 1 BWF GFI - 1

6 BB PFR - 4W AEL - 1 PE

7 WTY GFI - 1 VE - 2 AEL - 1 AEL - 1 PE

8 PE VE - 1 VE - 2 AEL - 1 BB PE

9 PE VE - 1 BWF BWSS GFI - 1 PF

10 PE DG VE - 1 WTY BWSS BB PF

11 DG VE - 1 VE - 2 WTY VS

12 BWSS BB VE - 2 GFI - 1 WTY

13 AEL - 1 BWSS PF VE - 2 VE - 1 BB

14 AEL - 1 VE - 2 VS VE - 2 VE - 1

15 BWSS VE - 2 EEM - 1 FO CSM VE - 1

16 BWSS EEM - 1 PF CSM VE - 1

17 CRSD BB BCS - 1 EEM - 1 PFR - 4W

18 EBM CRSD WTY BCS - 1 PFR - 4W BWSS

19 EBM PE EBM BCS - 1 WTY BWSS

20 NEI - 1 PE EBM BCS - 1 DG EBM

21 NEI - 1 PE INS DG EBM

22 PFR - 4W BRM NEI - 1 BCS - 1 INS DEF - 1

23 PFR - 4W BRM INS BCS - 1 NEI - 1 DEF - 1

24 GFI - 1 NEI - 1 CRSD INS INS

25 INS CRSD DG NEI - 1

26 NEI - 1 OECD DG

27 BCS - 1 INS OECD INS FO

28 BCS - 1 NEI - 1 INS FO

29

30

31

Holiday Saturday & Sunday

State Holiday

Page 54: Automotive Aftermarket Training Calender 2011

54

Accommodation – Indore

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:

1. Hotel Mayur39, Chhoti Gwal Toli Opp. Madhu Milan Cinema Indore Ph.: (0731) 270 5786/270 6786

2. Hotel Parag RegencyNear Kibe Compound Kamala Nehru School Road Indore Ph.: (0731) 504 2276

3. Hotel Uday Palace7, Kibe Compound Near Madhu Milan Talkies Indore Ph.: (0731) 270 4088

4. Hotel PoonamChhoti Gwal Toli Near Patel Statue Indore Ph.: (0731) 252 2250/252 2273

5. Hotel CrownOpp. Sarwate Bus Stand Indore Ph.: (0731) 252 2250/252 2273

6. Hotel New Sunder17/2, South Tukoganj Indore Ph.: (0731) 252 9051/252 0128

7. Hotel GalaxyTower Chouraha Indore Ph.: (0731) 247 2602/244 0206

Note: The hotel rates mentioned are only indicative and exclusive of taxes.

Tariffs may vary.

Bosch LimitedLocal Training Centre (LTC)C/o Ujjain Diesels Pvt. Ltd. 118 - A, Transport NagarIndore - 452 001

Page 55: Automotive Aftermarket Training Calender 2011

55

The 2011 Training Course Schedule –

IndoreMonth

Date

Jan Feb Mar April May June July August Sept Oct Nov Dec

1 BWF

2 PE EDC GFI - 1

3 BST PE AEL - 1 BWSS EDC VE - 1

4 BST PE AEL - 1 BWSS BB VE - 1

5 BB PE BRM BWSS WTY BCS - 1 VE - 1

6 EBM PE BRM VE - 1 BWSS BCS - 1 VE - 1

7 EBM PE VE - 1 MTS & A PE PE

8 VE - 2 VE - 1 WTY PE MTS & A PE AEL - 1 PE

9 VE - 2 VE - 1 VE - 2 PE VE - 1 PE AEL - 1 PE

10 BST CRSD VE - 2 PE VE - 1 WTE

11 VE - 1 BST CRSD AEL - 1 VE - 2 OECD WTE

12 VE - 1 AEL - 1 VE - 2 OECD VE - 2 BB BCS - 1

13 PFR - 4W BCS - 1 VE - 2 WTY BCS - 1

14 PFR - 4W NEI - 1 BST CSM BCS - 1 AEL - 1 PFR - 2W BB

15 INS BST BB CSM BWF AEL - 1 NEI - 1 WTY

16 VE - 2 BB CSM GFI - 1 NEI - 1 GFI - 1

17 OECD VE - 2 NEI - 1 WTY CSM PFR - 4W

18 BWSS OECD BB INS CSM PFR - 4W

19 BWSS OECD INS PFR - 4W CSM

20 BB OECD PFR - 4W PFR - 4W EBM BWSS

21 WTY BST CSM NEI - 1 OECD AEL - 1 PFR - 4W EBM VE - 2 BWSS

22 BST CSM OECD AEL - 1 VE - 2 CSM

23 NEI - 1 NEI - 1 INS CSM

24 VS CSM BST NEI - 1 INS NEI - 1 INS

25 INS CSM BST INS

26 PFR - 4W

27 PFR - 4W FO

28 INS FO

29 INS

30

31

Holiday Saturday & Sunday

State Holiday

Page 56: Automotive Aftermarket Training Calender 2011

56

Eligibility and Enrolment Procedure

The Bosch Training Centre

Your partner in educating your specialists

Qualified, experienced and competent personnel are essential for handling service of Bosch products.

Send your personnel for training and further education to the Bosch Training Centre. Ensure that you remain competitive in the future. Plan now for your future requirements.

Note: Training Fee will be debited to Network directly by Bosch Limited (DD not required). For Externalcustomers like OEMs, OECDs, STUs, Defence and Educational Institutions, Application Form to be accompanied with DD.

Eligibility

f Only those candidates who are employed with and sponsored by Bosch Authorised Representatives,Original Equipment Customers and their Dealers, State Transport Undertakings, Defence Organisations, Government Departments, ITI, Diploma College, Engineering Colleges, JOC Colleges etc., are normally considered eligible for training.

f Candidates should have adequate working knowledge of the medium of instruction. The course should be selected depending upon the proficiency of the candidate in the particular language.

Fee

f For Courses/Seminars at BTC: Rs. 900 per day/person

f For Courses/Seminars at LTC: Rs. 500 per day/person

How to apply?

Bosch Training Courses are offered at Bangalore, Chennai, Kolkata, Mumbai, New Delhi, Ahmedabad,Chandigarh, Guwahati, Indore, Jaipur, Lucknow, Raipur, Secunderabad and Hubli. Candidates may apply at any Training Centre of their choice. Application should be made on the prescribed application form, giving the required particulars to the BTC, or the respective RTCs/LTCs of the region.

Bangalore: Bosch Training CentreBosch Limited Naganathapura Plant, Electronic City P.O. Post Box No. 6887, Bangalore - 560 100 Ph.: (080) 4103 5541/42/43/40. Fax: (080) 2852 1608/2852 1239 E-mail: [email protected], [email protected], [email protected]

For LTCs at Chennai, Hubli and Secunderabad, apply to: Chennai: Regional TrainerBosch Limited Blossom Centre Old No. 27, New No. 30, North Boag Road T. Nagar, Chennai - 600 017 Ph.: (044) 2815 3916/2815 3917 Mobile: 091766 40990 E-mail: [email protected]

For LTCs at Guwahati, Kolkata, Raipur and Patna, apply to: Kolkata: Regional TrainerBosch Limited Post Box No. 9044 91-A, Park Street, Kolkata - 700 016 Ph.: (033) 2217 2144/2226 4570. Fax: (033) 2249 7482 Mobile: 097487 64392 E-mail: [email protected]

Page 57: Automotive Aftermarket Training Calender 2011

57

For LTCs at Ahmedabad, Indore and Mumbai, apply to: Mumbai: Regional TrainerBosch Limited 79, Dr. Annie Besant Road, Worli Mumbai - 400 018 Ph.: (022) 2493 2071/ 2497 2075. Fax: (022) 2497 3924 Mobile: 099875 64775 E-mail: [email protected]

For LTCs at Chandigarh, Jaipur, Lucknow and New Delhi, apply to: New Delhi: Regional TrainerBosch Limited ‘Rishyamook’, 85-A, Panchkuin Road New Delhi - 110 001 Ph.: (011) 2334 8260/3. Fax: (011) 2334 8264 Mobile: 098713 07355 E-mail: [email protected]

How to apply?

Working Hours:

RTCs/LTCs: Monday to Friday – 1000 to 1700 hr.

BTC: Monday to Friday – 0900 to 1600 hr.

f Candidates are required to make their own arrangements for lodging, boarding and transport. Some hotels are listed in this brochure. If any assistance is required, candidates may approach the respective Training Centres.

f In order to maintain the quality of training (during practical demonstration classes) the number of candidates for each course is restricted to 12.

f Seats are reserved on a ‘first-come-first-served’ basis. Candidates are to be deputed only after receipt of the confirmation from Bosch.

f Candidates reporting for a course without our confirmation will be accommodated only if there is a vacancy.

f Candidates attending the course should bring a letter of introduction from the sponsoring organisation.

f Although precautions are taken for the safety of the trainees, the company assumes no responsibility for any injury caused to them or loss of personal articles during the training period.

f No refund of the Seminar/Course fee for non-participation will be made, nor will it be adjusted for another Seminar/Course.

f Photography is prohibited within the factory premises.

f Applications should reach the Training Centres at least four weeks in advance of the required Seminar/Course.

f Applicants should not bring any laptops, mobiles with cameras, floppy diskettes, CDs/DVDs, video cameras, pen drives or memory sticks.

f Participants shall be held responsible for the loss of any Bosch property from the Training Centres during the Training courses.

Page 58: Automotive Aftermarket Training Calender 2011

58

Notes ___________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________________

Page 59: Automotive Aftermarket Training Calender 2011
Page 60: Automotive Aftermarket Training Calender 2011

Bosch Limited, Bosch Training Centre,Automotive Aftermarket,Naganathapura Plant, Electronic City P.O.,Post Box No. 6887, Bangalore - 560 100.Ph: (080) 4103 5540/ 41/ 42/ 43.Fax: (080) 2852 1608/ 2852 1239.

www.boschindia.com

AA

/SA

I-TS

S-T

C/2

011