Upload
skyla
View
122
Download
0
Tags:
Embed Size (px)
DESCRIPTION
AUTOMOTIVE NEW PRODUCTS 2013. “STEP IV”. INTERNALLY:. EXTERNALLY:. AUTO NEWS #2. PRESSES. BRAND NEW. HYDRAULICS. CREEPERS AND STOOLS. OIL TRANSMISSION FILLER. AIR TOOLS. INJECTOR PULLER SET. TIE ROD TOOL. ERGO HEAVY DUTY SIDE CUTTING PLIERS. ROLL CARTS, TROLLEY ACCESSORIES. - PowerPoint PPT Presentation
Citation preview
11
AUTOMOTIVE NEW PRODUCTS 2013
“STEP IV”
AUTO NEWS #2
INTERNALLY:
EXTERNALLY:
CREEPERS AND STOOLS HYDRAULICS
AIR TOOLS
PRESSES
PLASTIC REPAIR SET
INJECTOR PULLER SET OIL TRANSMISSION FILLER
DIGITAL TORQUE ADAPTORS
ROLL CARTS, TROLLEY ACCESSORIES
ERGO HEAVY DUTY SIDE CUTTING PLIERS
BRAND NEW
RE-LAUNCH
TIE ROD TOOL
22
Auto News #2Hydraulics
PressesCreepers and stoolsInjector puller set
Oil transmission fillerTie rod tool
Air toolsPlastic repair kit
Digital torque adaptorsRoll carts
Trolley accessories ERGO side cutters
Step I Step II Step III Step IV
33
HYDRAULICSLIFTING EQUIPMENT
Product features: The stand raises automatically when pulling the lever upwards.
No efforts to raise the stand thanks to a spring inside the pole. Allows the user to have one free hand . Exclusivity in Europe.
Three different capacities: 3, 5 and 10 ton. BS & TÜV approved. Sold in pairs.
AUTO RISING PAIR OF JACK STANDS N
EW
Product code
EAN code Capacity (kg)
Minimum height (mm)
Maximum height (mm)
Frame length (mm)
Weight (kg)
BH3A3000BH3A5000
BH3A10000
73141502346467314150234653 7314150234653
3,0005,00010,000
344403526
510620776
220 x 188 x 340280 x 248 x 400372 x 327 x 502
10.414.434.0
Maxi height
Mini height
Product features: Wider base surface in order to reduce the pressure on the ground and
to allow supporting weights on sand or similar. Strong safety pins with rubber grip. The base has a place where you can put the pin vertically. The pin is
attached to the base with a small cable to prevent it from getting lost when not in use.
Two different capacities: 7 and 15 ton. BS & TÜV approved.
JACK STANDS WITH SQUARE BASE
NEW
Product code
Capacity (kg)
Minimum height (mm)
Maximum height (mm)
Frame length (mm) Weight (kg)
BH3SQ7000BH3SQ15000
7,00015,000
268338
420500
220 x 220 x 260250 x 250 x 340
10.018.8
6
Product features: Foldable body and four fixed positions of the lifting arm: 2,000, 1,500, 1,000, 500
kg. Dual pump cylinder which decreases the number of necessary strokes by 50%
(compared to Irimo version). Extreme flexibility and wide area of usage;
Minimum legs entry height: 130 mm Maximum arm hook height: 2,640 mm
Steel and PU (polyurethane) covered wheels ensures both excellent durability and silent handling.
Swiveling PU covered lever for easy and comfortable pumping from all positions. Increased safety thanks to:
”Dead man” safety mechanism. Overload valve. Swivel safety hook.
CE certified.
FOLDABLE CRANE, 2 TON
NEW
Product code EAN Code Pcs Dimensions Weight (mm) (kg)
BH6FC2000 7314150234639 1 1,950 x 580 x 570 168
6
Dimensions on next slide!
7
FOLDABLE CRANE, 2 TON
NEW
7
8
Product features: Very compact and easy to store thanks to the foldable legs system. Foldable body and three fixed positions of the lifting arm: 200, 400 and 600 kg. Dual pump cylinder which decreases the number of necessary strokes by 50%. Extreme flexibility and wide area of usage:
Minimum legs entry height: 100 mm. Maximum arm hook height: 2,135 mm.
Steel and PU (polyurethane) covered wheels ensure both excellent durability and silent handling.
Swiveling PU covered lever for easy and comfortable pumping from all positions. Increased safety thanks to:
”Dead man” safety mechanism. Overload valve. Swivel safety hook.
CE certified.
FOLDABLE EUROPALLETCRANE, 600 KG N
EW
Product code EAN Code Pcs Dimensions Weight mm kg
BH6PC600 7314150234622 1 1650x490x510 103
8
Dimensions on next slide!
9
FOLDABLE EUROPALLETCRANE, 600 KG N
EW
9
10
Product features: Multi purpose jack to be used with cars , ATV/ Quads and motorcycles. It has two functions: works both as a trolley jack (lift up) and as a jack stand (keeps the vehicle lifted). Extra large round shaped foot pedal for increased access from any position. Dual pistons which decreases the number of necessary strokes with 50% (compared to single piston unit). Rubber saddle included protecting all surfaces and prevents slipping. Steel and PU (polyurethane) covered wheels ensures both excellent durability and silent handling. Curved handle for increased comfort and accessibility. Useful tray located at the bottom of the lever for easy storage of for example tools, screws and nuts. Safety pressure valve preventing overloading. Safety lowering valve ensures safe lowering even at maximum load. Clicking / ratcheting system blocks the arm and acts as a jack stand with four positions. CE certified and in accordance with BS EN1494 compliance.
MULTI PURPOSEJACK, 1.0 TON N
EW
101010
Product code
Capacity (kg)
Minimum height (mm)
Maximum height (mm)
Frame length (mm)
Weight (kg)
BH1M1000 1.000 100 450 760x480x160 54.5
Product features: Double plunge for quick lifting (7 strokes). Protected handle to avoid damaging the car. Rubber saddle included. PU wheels. CE and EN1494 certified.
ENTRY LEVEL FLOOR JACK, 3 TON
NEW
Product code
Capacity (kg)
Minimum height (mm)
Maximum height (mm)
Frame length (mm)
Weight (kg)
BH1EU3000 3000 130 460 750x395x160 31
1212
OTHER GARAGE EQUIPMENTCREEPERS AND STOOLS
13
Product features: Adjustable header with three positions. Capacity: 136 kg. Low height: 120 mm. High density foam pad for higher resistance with good comfort. Hanger at the back for easy storage in the garage. Four PVC wheels, with 75 mm diameter, 25 mm width and steerable 360º.
LOW PROFILE CREEPER
NEW
13
Productcode
EAN code
Foam width (mm)
Creeper outer dimension (mm)
Creeper height (mm)
Wheel dimensions (mm)
Weight (kg)
BLE301 7314150227662 320 1,020 x 590 120 75 x 25 10.0
14
Product features: Three working positions: creeper, seat and stool. Capacity: 136 kg. Low height: 135 mm. High density foam pad for higher resistance with good comfort. Six PP (polypropylene) wheels, with 60 mm diameter, 10 mm width and steerable 360º.
CREEPER AND STOOL COMBI
NEW
14
Product code
EAN code
Foam width (mm)
Creeper outer dimension (mm)
Creeper height (mm)
Wheel dimensions (mm)
New weight (kg)
BLE302 7314150227679 350 1,010 x 490 135 60 x 10 12.0
Position 1: creeper
Position 2: seat
Position 2: stool
15
Product features: Flexible height with easy-to-use adjustment system. Capacity:136 kg. Three drawer storage plus a tray for storage of tools, fasteners, accessories or any type of object. Rotatable high density foam pad for higher resistance with good comfort. Four PVC wheels, with 75 mm diameter, 25 mm width and steerable 360º.
STOOL WITH STORAGE
NEW
Productcode
EAN code
Seat diameter (mm)
Storage outer dimension (mm)
Seat heights (mm)
Wheel dimensions (mm)
New weight (kg)
BLE300 7314150227648 370 380 x 380 x140 435 - 555 75 x 25 11.0
15
1616
OTHER GARAGE EQUIPMENTPRESSES
17
Product features: Robust welded frame with exclusive design thanks to the
rounded shapes. Large pressure gauge for easy reading at convenient eyes level. Sliding and chromed piston. Rulers to facilitate centring the piston with the item
to extract or insert. Two V-blocks included usable on V or flat side
depending on the need. Auto-centering pins for the table. Double speed pump with built-in safety overload valve. Quick approach. Pressing pins set with six pins and a punch plate included. All handles and knobs are isolated. Tool tray at the bottom.• Robust and stable feet.
BENCHPRESS, 15 TON
NEW
17
Productcode
EAN code
Capacity (ton)
Pedal
Handle Winch Pressing pins set
Weight (kg)
BH715 7314150237555 15 No Yes No Yes 80.0
Dimensions on next slide!
18
Dimensions:
BENCHPRESS, 15 TON
NEW
18
19
Product features: Robust welded frame with exclusive design with rounded shapes. Large pressure gauge for easy reading at convenient eyes level. Sliding and chromed piston. Rulers to facilitate centring the piston with the item to extract. Two V-blocks included usable on V or flat side depending on the need. Auto-centering pins for the table. Double speed pump with built-in safety overload valve. Easy raising and lowering of the press table thanks to the winch
with swiveling handle. Quick approach thanks to the pedal or the handle. Pedal with anti-slip rubber pad. Pressing pins set with eight pins and a punch plate included. All handles are isolated. Tool tray at the bottom.• Robust and stable feet.
PRESSES 20, 30 AND 50 TON
NEW
19
Product code
EAN code
Capacity (ton)
Pedal Handle Winch Pressing pins set
Weight (kg)
BH720BH730BH750
731415023565073141502356677314150235674
203050
YesYesYes
YesYesYes
YesYesYes
YesYesYes
152189301
Dimensions on next slide!
20
NEW
20
PRESSES 20, 30 AND 50 TONDimensions:
21
Product features: Safety guard to protect the user against projections of
components during pressing. Easy to install with just four screws. The guard can be easily adjusted vertically according to
the position of the table by just sliding the guard in the lateral guides, see picture.
SAFETY GUARD FOR 20, 30 AND 50 TON PRESSES N
EW
21
Product code EAN Code Description Frame length (mm)
BH720SGBH730SGBH750SG
731415023847773141502384847314150238491
Safety guard press 20TSafety guard press 30TSafety guard press 50T
220 x 188 x 340280 x 248 x 400372 x 327 x 502
2222
BODY REPAIRINGPLASTIC REPAIR
23
HOT STAPLER / PLASTIC REPAIRING SETProduct Features: Application: allows the user to repair broken plastic through electric heating. Application areas:
Car body repair shops All kinds of maintenance departments Electricians
Contents: Electric heating device including pen and cable with EU plug. U-shaped Staplers Ø 0.6 mm (100 units in a plastic box). U -shaped Staplers Ø 0.8 mm x [(00 units in a plastic box). V –shaped Staplers Ø 0.6 mm x (100 units in a plastic box).
Small electric device, enabling a very quick and strong repair. Place the stapler in the pen, heat it up and you can easily put together
broken pieces of plastic. Heat control with three different positions, choose the level that suits
the strength of the plastic to be worked on. Several stapler shapes and sizes available, in total six different types offered individually (see next page). Lateral TPR cover for protection of the device and a professional design. Supplied in a foam inlay in blow mould case with user manual. Check out our application video on YouTube: http://youtu.be/Zk-FF8u_GtM
23
Product code EAN Code Pcs Box dimensions (mm) Weight (kg)
BBS210 7314150215362 3 95 x 357 x 270 2.5
24
ACCESSORIES FOR HOT STAPLER / PLASTIC REPAIRING SET
Boxes of staples,100 pcs.
24
Code Ø (mm) Shape Picture
BBS210V06 0.6 V
BBS210U06 0.6 U
BBS210UA06 0.6 U and Angled
BBS210W06 0.6 W
BBS210V08 0.8 V
BBS210U08 0.8 U
BBS210UA08 0.8 U and Angled
BBS210W08 0.8 W
2525
ENGINE AND PLUG TOOLSINJECTION
26
Product features:• The kit includes:
• Puller with 4 kg sliding hammer.• 10 various sockets and adaptors for removing
Siemens, Bosch, Delphi and Denso injectors.• 1 ball joint to facilitate the pulling in different
positions.
INJECTORS PULLER SET
NEW
262626
Product code
EANcode
Number of adaptors and sockets
Weightkg
BE1311P13 7314150235414 10 9.50
2727
OIL CHANGE, GREASING & LUBRICATIONOIL CHANGE TOOLS
28
Product features: Oil transmission filler, by using pressure. Tank in polypropylene with 8 liters capacity. Comprehensive set of 11 hose adaptors covering the majority of the car brands.
OIL TRANSMISSION FILLER
NEW
282828
Product code
EANcode
Nber adaptors and sockets
Weightkg
BOD6080P12 7314150235414 10 9.50
2929
TRANSMISSION AND WHEEL TOOLSWHEEL ALIGNMENT
30
TIE ROD REMOVAL/INSTALLATION TOOL
Product features: This tool makes it possible to install and remove steering knuckles from Ø 28 up to Ø 35 mm. Completing our range of tie rods (our current BS50 covers Ø 35 up to Ø 45 mm). The tool includes a head, a tube and a hexagon drive. The head is composed of a body, a cage and 3 runners. The rotation of the tool enables the self-locking of the runners between the body and the knuckle to screw or
to unscrew. New user manual available on the Intranet for BS50 and BS51. Two repair sets available: BS5001 for BS50 and BS5101 for BS51.
Product code EAN code Pcs Box dimensions (mm) Weight (kg)
BS51 7314150239009 1 80 x 460 x 80 2.80
BS50 7314150178858 1 80 x 460 x 80 2.02
BS5001 7314150239016 1 100 x 100 x 80 0.20
BS5101 7314150239023 1 100 x 100 x 80 0.20
3131
AIR TOOLSTOP LINE
3232
ICON INDEX
Strikes per
minute
33
Product features: Magnesium housing. Twin hammer mechanism with eight vanes rotor . Rubber grip. One-hand operation power regulator. Fast forward/reverse valve. Air exhaust in handle. Rubber boot included. Muffler kit included to choose the preferred power and sound
combination. The difference vs. BPM916 is that BPM916P is equipped with a
pinned anvil for keeping the socket safely attached.
3/8" IMPACT WRENCH WITH PINNED ANVIL
NEW
33
BPM916P 7314150236435 1 3/8” 6.2 1/4” 10 68 300 440 10,700 1,400 99.1 4.5 155 1.3
BPM916 7314150184187 1 3/8” 6.2 1/4” 10 68 300 440 10,700 1,400 99.1 4.5 155 1.3
34
Product features: Magnesium housing. Twin hammer mechanism with eight vanes rotor. Rubber grip. One-hand operation power regulator. Fast forward/reverse valve. Air exhaust in handle. Rubber boot included. Muffler kit included to choose the preferred power and sound
combination. The difference vs. BPM914 is that BPM914P is equipped with a
pinned anvil for keeping the socket safely attached and BPM914L has a long anvil for better accessibility.
1/2" MINI IMPACT WRENCH WITH PINNED ANVIL
NEW
34
BPM914P 7314150236473 1 1/2” 6.2 1/4” 10 68 300 440 10,700 1,400 96.6 4.54 155 1.3
BPM914L 7314150236480 1 1/2” 6.2 1/4” 10 68 300 440 10,700 1,400 96.6 4.54 193 1.3
BPM914 7314150184170 1 1/2” 6.2 1/4” 10 68 300 440 10,700 1,400 96.6 4.54 155 1.3
1/2" MINI IMPACT WRENCH WITH LONG ANVIL
35
Product features: Magnesium housing. Twin hammer mechanism with eight vanes rotor. Rubber grip. One-hand operation power regulator. Fast forward/reverse valve. Air exhaust in handle. Rubber boot included. Muffler kit included to choose the preferred power and sound
combination. The difference vs. BPM915 is that BPM915P is equipped with a
pinned anvil for keeping the socket safely attached and BPM915L has a long anvil for better accessibility.
1/2" IMPACT WRENCH WITH PINNED ANVIL
NEW
35
BPM915P 7314150236503 1 1/2” 6.2 1/4” 10 178 813 1098 9,800 1,270 102.5 5.1 194 9.8
BPM915L 7314150236510 1 1/2” 6.2 1/4” 10 178 813 1098 9,800 1,270 102.5 5.1 245 9.8
BPM915 7314150184194 1 1/2” 6.2 1/4” 10 178 813 1098 9,800 1,270 102.5 5.1 194 9.8
1/2" IMPACT WRENCH WITH LONG ANVIL
36
Product features: Die grinder 6 mm. Includes 3 mm collet. Rubber grip. Safety trigger. Balanced lightweight housing. All ball bearing construction and high strength alloy steel gear
system. Hard coated motor plates.
STRAIGHT DIE GRINDER, 6 MM
NEW
36
BP922 7314150236527 1 6.2 1/4” 10 40 25,000 84 3.8 200 149 0.73
37
Product features: Angle die grinder 6 mm. 3 mm collet included. Rubber grip. Safety trigger. Balanced lightweight housing. All ball bearing construction and high strength alloy steel gear
system. Hard coated motor plates.
ANGLE DIE GRINDER, 6 MM
NEW
37
BP922A 7314150236534 1 6.2 1/4” 10 40 25,000 84 3.8 200 144 0.86
38
Product features and benefits: Drill 10 mm with keyless chuck enabling the user to change
drills fast and smoothly. The difference vs. BP925 is that BP925KL is that BP925 has a
key chuck. Rubber grip. Variable speed trigger. Fast forward/reverse lever. 0.0635 mm chuck runout.
DRILL WITH AUTOMATIC CHUCK, 10 MM
NEW
38
BP925KL7314150236
5411 10 6.2 1/4” 10 108 0 - 6 2,500 80 < 2.5 205 1.1
BP9257314150184
2311 10 6.2 1/4” 10 108 0 - 6 2,500 80 < 2.5 178 1.0
39
Product features and benefits: Drill 13 mm with keyless chuck enabling the user to change
drills fast and smoothly. The difference vs. BP926 is that BP926KL is that BP926 has a
key chuck. Rubber grip. Variable speed trigger. Fast forward/reverse lever. 0.0635 mm chuck runout. Support handle included.
DRILL WITH AUTOMATIC CHUCK, 13 MM
NEW
39
BP926KL 7314150236
5581 13 6.2 1/4” 10 108 0 - 34 450 80 < 2.5 222 1.3
BP926 7314150184
2481 13 6.2 1/4” 10 108 0 - 34 450 80 < 2.5 240 1.3
4040
AIR TOOLSBASE LINE
4141
ICON INDEX
Strikes per
minute
42
Product features: 7" angle polisher. Rubber grip. Power regulator. Safety trigger. Spindle lock.
7" ANGLE POLISHER
NEW
42
BP8097314150235841 1 6.3 1/4” 10 108 2,500 90 < 2.5 970 328 2.3
43
Product features: 7" vertical polisher. Rubber grips. Power regulator. Air exhaust in support handle.
7" VERTICAL POLISHER
NEW
43
BP8107314150235858 1 6.3 1/4” 10 177 2,500 87.5 3.96 597 185 2.3
44
Product features: Air shears. Cutting capacity: 1.6 mm Aluminum/1.2 mm steel. Rubber grip. Power regulator. Safety trigger.
METAL SHEARS
NEW
44
BP811 7314150235865 1 6.3 1/4” 10 85 2,600 85 1.1 373 376 1.0
45
Product features: Extended cut off tool 4"/102 mm. Rubber grip. Power regulator. Safety trigger. Spindle lock.
EXTENDED CUT OFF TOOL
NEW
45
BP111E731415023587
21 102 6.3 1/4” 10 105 15,0
00 88 <2.5 376 1.6
46
Product features: Low revolution grinder/tyre buffer with keyed chuck. Rubber grip. Power regulator. Safety trigger. Swivel connection.
LOW REVOLUTIONS GRINDER
NEW
46
BP1187314150235834 1 6.3 1/4” 10 113 2,500 79 <1.7 373 236 1.0
47
Product features: Short version:
Air blow gun. Brass inlet.
Long version: Air blow gun with long nozzle,
nozzle length 330 mm Brass inlet.
BLOW GUN NON OSHA
NEW
47
BP219 7314150235889 1 6.3 1/4” 68 < 80 240 0.13
BP219L 7314150235896 1 6.3 1/4” 340 < 80 470 0.15
4848
TORQUE TOOLSDIGITAL TORQUE ADAPTORS
49
ELECTRONIC TORQUE AND ANGLE ADAPTOR
49
Product features: Enables easy and precise torque and angle tightening – all in one device! Simple operation with a regular ratchet and socket. Easy to follow the tightening in real time thanks to the 12 LED indicators and an audible
signal. Precise! Accuracy of ± 4% enables exact and accurate tightening. Memory for up to 50 operations. Possible to perform tightening in Nm, Lb.ft and Lb.in. Angle tightening from 0-999º. Possible to pre-set 9 different values for standardized tightening. Small size enables torque tightening in confined and restricted areas. Delivered in a protective pouch with foam inlay for maximum tool protection.
Product code Drive Torque rangeNm
Torque rangeLb.ft
Torque rangeLb.in
Box dimensions (mm)
Packaging weight (g)
TAM1430 1/4 1,5-30 1-22 13-266 110x110x120 370TAM38135 3/8 6,8-135 5-100 60-1194 110X110X120 430TAM12135 1/2 6,8-135 5-100 60-1194 110X110X120 450TAM12200 1/2 10-200 7,4-147,5 88,5-1770 110X110X120 450TAM12340 1/2 17-340 12,5-251 150,5-3009 110X110X120 450
50
DIGITAL ANGLE METER
50
Product features: Enables precise and easy angle tightening with digital precision! Strong magnet on the back – can be clicked onto any ratchet, wrench, adjustable etc. Easy to follow the tightening in real time thanks to the 6 LED indicators and an audible
signal. Precise! Accuracy of ± 2% enables exact and accurate tightening. Memory for up to 50 operations. Angle tightening from 0-999º. Possible to pre-set 9 different values for standardized tightening. Small size makes it ideal for confined spaces. Automatic shut-off for longer battery life. Delivered in a protective pouch with foam inlay for maximum tool protection.
Product code EAN code Angle range (º) Box dimensions Packaging weight (g)
MAM50M 7314150215300 0-999 110x110x120 280
5151
TOOL STORAGEROLL CARTS
52
TWO AND THREE TRAYSROLL CARTS
52
Product features: Three and two trays roll carts.
1470KC2 has two trays. 1470KC3 has three trays.
Large capacity trays for storing both small and bulky objects. Manufactured and designed for easy and quick assembly. Aluminum U shape structure. Wheels of 25 x 100 mm with ball bearings and non-marking
TPR on the surface. 2 swiveling. 2 swiveling with brake.
Internal dimensions of the trays: 750 x 425 x 77 mm. Color: orange.
Product code EAN code Box dimensions (mm) Weight (kg)
1470KC3 7314150229680 500 x 1,200 x 800 25.5
1470KC2 7314150226696 270 x 960 x 500 19.0
1470KCTRAY 7314150226702 135 x 960 x 500 6.50
53
MULTIFUNCTIONAL ROLL CARTS
53
Product features: Three drawers & two trays roll carts; one orange (1470KC5) and one black (1470KC5PC.) Large foldable tray included: 435 x 425 mm. Pry bar / screwdriver key locked box included: 23 holes of various diameters. Manufactured and designed for easy and quick assembly. Black painted aluminum U shape. Strong and secure round type key and locking mechanism with same combination in roll cart and
pry bar/ screwdrivers box. Wheels of 100 x 25 mm with ball bearings and non-marking TPR on the surface:
two swiveling and two swiveling with brake. Large capacity drawers with click/detent system and 100% opening ball bearings. Drawers can be locked from the upper tray. Drawers internal dimensions:
(2 x) 675 x 375 x 50 mm (1 x) 675 x 375 x 110 mm
Upper tray providing a large working surface of 700 x 440 mm, with two gas springs in the lid making the opening very smooth and comfortable.
Upper and bottom trays´ internal dimensions:(2x) 755 x 425 x 77 mm.
Product code EAN code Box dimensions (mm) Weight (kg)
1470KC5 7314150226665 642 x 1,040 x 645 70.0
1470KC5PC 7314150226672 642 x 1,040 x 645 70.0
5454
TOOL STORAGEACCESSORIES
55
Product features: Robust foldable metallic tray for extending the working surface when necessary. Suitable for both the 1470 and 1475 series. Easy to assemble (with a hanging system and 2 screws) in any of both laterals of the trolleys. Load capacity: 35 kg. Working surface: 455x460 mm.
FOLDABLE TRAY
NEW
55
Product code EAN code Box dimensions (mm) Weight (kg)
1470K-AC1 7314150226498 46 x 615 x 475 6.3
56
Product features: Metallic box with 23 holes for storing pry bars and
screwdrivers. Suitable for both the 1470 and 1475 series. The box is secured with the round type key lock
already used in our trolleys. Easy to assemble (with a hanging system and two
screws) in any of the two lateral sides of the trolleys.
TOOL HOLDER
NEW
56
Product code EAN code Box dimensions (mm) Weight (kg)
1470K-AC2 7314150226504 315 x 435 x 115 4.99
57
Product features: Robust can holder that can store several cans and
sprays. Suitable for both the 1470 and 1475 series. Easy to assemble (with a hanging system and two
screws) in any of the two lateral sides of the trolleys.
Space for cans: 455 x 85 x 140 mm.
CAN HOLDER
NEW
57
Product code EAN code Box dimensions (mm) Weight (kg)
1470K-AC3 7314150226511 115 x 483 x 166 1.95
58
Product features: Robust document holder that can store documents
and other objects. Suitable for both the 1470 and 1475 series. Easy to assemble (with a hanging system and two
screws) in any of the two lateral sides of the trolleys.
Storage space: 355 x 80 x 180 mm.
DOCUMENT HOLDER
NEW
58
Product code EAN code Box dimensions (mm) Weight (kg)
1470K-AC4 7314150226528 116 x 386 x 206 1.58
59
Product features: Metallic panel with slots and dots for
hooks where you can hang the most used tools.
Easy to assemble with four screws in any of the two lateral sides of the trolleys.
Dimensions: 822 x 429 mm.
SLOTS AND DOTS SIDE PANEL
NEW
59
Product code EAN code Box dimensions (mm) Weight (kg)
1470K-ACSIDE 7314150226535 45 x 849 x 446 4.50
60
Product features: Set of drawer sheets, 7 pcs. Ideal for protecting the drawers. Prevents tools from moving inside the drawers. Dimensions: 453 x 445 mm. Fits all 1470K/1480K and 1475K and series drawers.
DRAWER SHEET
NEW
60
Product code EAN code Box dimensions (mm) Weight (kg)
1470KAC01 7314150165124 100 x 550 x 100 0.12
61
TROLLEY TOPS
61
Product features Wooden tops for 1470K and 1475K trolleys:
SSNAWT1475: 40” for XL trolleys. SNAWT1470: 26” for small trolleys.
Stainless steel tops for 1470K and 1475K trolleys: 1470KXL-AC5: 40“ for XL trolleys. 1470K-AC5 : 26“ for small trolleys.
Install the top by simply putting it on top of the trolley (the weight of the top is enough for keeping it stable) or by fastening it through the four holes in the top of the trolley (removing two or three upper drawers will make the job easier).
Product code EAN code Box dimensions (mm) Weight (kg)
SSNAWT1475 7314150221639 65 x 1,050 x 510 18.0
SNAWT1470 7314150221622 65 x 600 x 510 12.0
1470K-AC5 7314150237579 65 x 600 x 510 12.0
1470KXL-AC5 7314150237586 65 x 1,050 x 510 20.0
SSNAWT1475
1470KXL-AC5
SNAWT1470
6262
ERGO HAND TOOLSERGO SIDE CUTTING PLIERS
SEE SEPARATE LAUNCH INFORMATION