AUTOMOTIVE & MACHINE MANUFACTURING

1Project name: Automotive Hub ProjectProject content：

Changsha, the provincial capital of Hunan, is known as the city of heavy engineering machinery in central region and at present the city has a scale of more than 29 engineering machinery enterprises, including six large and medium sized enterprises, of which the products cover more than 400 varieties involving 12 large categories and more than 100 small categories. Changsha Economic and Technological Development Zone, where the project located, gathered a number of leading enterprises, such as SANY Group Co.,Ltd., Zoomlion Heavy Industry Science & Technology Development Co., Ltd., Sunward Intelligent Machinery Co., Ltd. and so on. However, many problems exist in the two industries of engineering machinery and automobile, such as, the lack of part support, absence of key final assembly support, short and narrow industrial chain, etc. Therefore, the investment introduction of key part project will help to extend the two industrial chains and concentrate industrial groups, and promote rapid economic development of Changsha as well as Hunan province.

The automotive hubs produced in this project belong to the key components of engineering machinery and automotive products. The implementation of the project relies on the strong engineering machinery and automobile industry in Hunan and is in line with state industrial policies as well as industrial development policies of Hunan, so the project has a good economic expectation and social benefits.

The project is planned to cover an area of 13.33 hectares. The construction contents include: modeling workshop, machining workshop, raw material warehouse, finished product warehouse, hub technical R&D and test center, training center and office building with a total construction area of 95,000 square meters. After putting into service, it will provide an annual production capacity of 800,000 hubs of various light and heavy tonnages.

Total investment: $ 60,610,000Cooperation mode: Sole proprietorship, joint venture, cooperation and otherProject unit: Investment Promotion & Cooperation Bureau of Administrative Committee of

Changsha Economic & Technical Development Zone: No.2, Sanyi Road, Xingsha, Changsha City, Hunan Province, ChinaContact person: Chen HaiyanTel: +86 -731-84011108

2Project name: Electric Automobile ProjectsProject content：

In recent years, Hunan has always a strong demand for automobiles, showing as the rapid

rise in industrial output. As of 2008, Hunan automotive industry output value has reached RMB 30

billion Yuan, and maintained a sustained growth momentum. According to industry planning in

Hunan Province, the industrial output value scale of Hunan automotive industry is expected to

achieve RMB 200 billion Yuan by 2015.

In November 2008, the State Council announced 10 measures to expand domestic demand

and promote growth, cancelled the credit quota restrictions of commercial bank, and reasonably

expanded the credit quota and the central bank continuously lowers interest rates making

borrowing costs to be plummeted. Then, the Changsha Center Branch of the People's Bank of

China proposed 10 measures on how to implement "the State Council’s 10 National notices" in

Hunan banking, where Item 6 clearly indicates "actively launch mortgage loans business for

automobile, large durable consumable". These provide a good opportunity for the booming

development of automotive market in Hunan. As introducing the plan for revitalizing automotive

Industry and the policy for constructing the “two-oriented society” in Hunan Province, Hunan

automotive industry meets a very good development opportunities. As an environmental protective

automobile, electric automobile has received the strong support from various policies during

development, and which can be expected in the near future, this energy-saving and environmental

protective automobile will have a huge market. In summary, the introduction of electric automobile

project in Hunan is significant, not only for the social benefits, but also economic benefits.

The construction project is planned to cover an area of 400 mu and the construction content

includes: testing workshop, part warehouse, finished product warehouse, battery production

workshop, electric automobile assembly workshop, motor controller and power final assembly

workshop, R & D buildings and office buildings with construction area up to 176,000 square

meters. The total investment of the project is one billion, of which 900 million Yuan for fixed assets

(mainly investing in land, workshop, production and R & D equipment), 100 million Yuan for initial

working capital. The project construction period is two years. In the same year when the project is

completed, the production output will reached 30,000 units per year, and realize 2 billion Yuan of

annual sales income, 220 million Yuan of net profit with 22% of the investment profit rate. The

investment recovery period (including construction period) is 6.55 years.

Total investment: $ 151,520,000

Cooperation mode: Sole proprietorship, joint venture, cooperation and other

Project unit: Investment Promotion & Cooperation Bureau of Administrative Committee of

Changsha Economic & Technical Development Zone

Mailing address: No.2, Sanyi Road, Xingsha, Changsha, Hunan, China

Contact person: Chen Haiyan

Tel: +86 -731-84011108

3Project name: New Power Automobile Supporting Industrial Park Project Project content：

In next few years, the automotive motor production capacity of economic development zone will increase from 200,000 to more than 900,000, which becomes one of the six sections of Chinese automobile industry. The existing local supporting rate is only 29%, and speeding up the construction of the local automobile supporting industry is extremely urgent.

The project covers an area of 200 mu with planning construction area of 226,500 square meters and the total investment is 450 million. Development period is divided into two phases, and first phase engineering will be put into service in 2012. After completion, the project can provide 150 thousand square meters of standard workshops and warehouses, and can offer development platform for nearly 300 automotive supporting enterprises. The expected annual production value of settled enterprises may be nearly 1.5 billion Yuan.

In early period, we have communicated with many motor manufacturers for several times, such as Beijing Foton Motor Group, Guangzhou Automobile Group and Fiat, and we have reached a cooperative intention with Beijing Foton, and will jointly introduce about 15 resources to Hunan automotive supporting enterprise park, including hydro cylinder, steel ring, instruments, traversing mechanism, electrical equipments, etc. We have also communicated with domestic and international big parts factory, and some enterprises expressed the intention to lease and purchase in enterprise’s park. Understood the industrial policy in relevant departments in the development zone, carried out a detailed market research and hired experts to conduct feasibility studies. They have prepared the related operating capital, related industrial real estate development and operational reserve of talents, and have carried out related operation and investment of industrial real estate as well as introduction of management personnel

Total investment: $ 68,180,000Cooperation mode: Sole proprietorship, joint venture, cooperation and otherProject unit: Investment Promotion & Cooperation Bureau of Administrative Committee of

Changsha Economic & Technical Development Zone : No.2, Sanyi Road, Xingsha, Changsha City, Hunan Province, China

Contact person: Chen HaiyanTel: +86 -731-84011108

4Project name: AVIC Landing Gear Project Project content：

AVIC Landing Gear Advanced Manufacturing Corp. is the only aircraft landing gear manufacturer in China, which is integrated and restructured from Shaanxi Liaoyuan Aviation Machinery Co., Ltd. and Hunan Xiangling Machinery Factory which are subsidiary to AVIC II as well as absorbing the Central South University and Zoomlion Heavy Industry Science & Technology Development Co., Ltd. as sponsors to set up jointly. On the basis of this core, choose opportunity to integrate the other units belonged to AVIC II, such as 608 institute, 331 factory, 5712 factory, the Third Institute of Aerospace Science and Industry Group, 310 factory and so on.

The project is invested by AVIC Landing Gear Advanced Manufacturing Corp., with a total planning area of 1,200 mu, located at Maqiaohe Road in the East, Wangcheng Avenue in the west, south to Tongxin Road, north to Jingge Road. The project places emphasis on the manufacture of aircraft landing gear, aviation subcontract production, large aircraft joint venture and cooperation projects, transmission case and other civil-military integration high-tech industrial projects.

Total investment: $ 530,000,000Cooperation mode: Joint ventureProject unit: AVIC Landing Gear Advanced Manufacturing Corp.: Intersection of Hangkong Road and Puri Avenue, Wangcheng Economic Development Zone, Hunan ProvincePost code: 410200Contact person: Xu JunTel: +86 -731-88073028

5

Project name: Diesel Engine Project in Changsha National Economic and Technological Development Zone

Project content:

The diesel engine of this project belongs to key components and parts of engineering

machinery and automobile. With the help of powerful Hunan engineering machinery

industry and automobile industry as well as the accordance to industrial development

policies of both Hunan province and China, the implementation of this project will have

significant economic perspective and social benefits.

The project site is in Changsha National Economic and Technological Development

Zone and it plans to occupy an area of 500mu. The construction of this project includes

raw material area; spare parts area, mechanical workout area, mechanical workout area,

heat treatment area, mechanical workout and engine run-up area as well as auxiliary

projects such as top level engine R&D center and office building. The contraction land is

planned to be 240000 square meters with the production capacity of 2 million on

engineering plant, SUV, MPV, light truck, commercial vehicle and other auxiliary products.

Total investment: 187.5 million USD

Cooperation mode: Cooperation mode，joint venture, sole proprietorship

Project unit: Investment Promotion Cooperation Bureau of the Administrative Committee

of Changsha National Economic and Technological Development Zone

Contact person:Chen Haiyan

Tel: 86-731-84020186

Fax：86-731-84020036

Email: trade108@163.cn

6

Project name: Hydraulic System Project in Changsha National Economic and Technological Development Zone

Project content:

Hydraulic system is a key component which applies to industries such as machinery,

automobile, ships, aviation and etc.. With the help of powerful Hunan engineering

machinery industry and automobile industry, as well as the accordance to industrial

development policies of Hunan province and China, the project will have significant

economic perspective and social benefits.

The project site is in Changsha National Economic and Technological Development

Zone and it proposed an area of 300mu with the contraction land of 130,000 square

meters. The construction of this project includes: hydraulic system assembly workshop,

machining center, cold working center, inspection center, raw material warehouse, semi-

finished products warehouse, finished products warehouse, packing material warehouse,

and R&D center as well as office building. It is specified in general planning with annual

production of 200 thousand engineering machinery and automobile hydraulic system.

Total investment: 101.56 million USD

Cooperation mode：joint venture, sole proprietorship

Project unit:Investment Promotion Cooperation Bureau of the Administrative Committee

of Changsha National Economic and Technological Development Zone

Contact：Chen Haiyan

Tel：86-731-84020186

Fax：86-731-84020036

Email: trade108@163.cn

7

Project name: The Investment Attraction for Engineering Machinery Ancillary Products

Project content：Shanxi Automobile Changsha Huantong Automobile Making Co., Ltd is specialized in

the production and sales of vehicles, special vehicle equipments and spare parts with the registered capital of 14.0625 million US Dollars. By combining the advantages of Shanxi Automobile Group on techniques, brand, market, sales channels of heavy dump truck, heavy tractor semi-trailer and heavy special truck, with the advantages of vehicle cab, car bodies, trailers and other large spare parts in Hunan enterprises, it is planning to invest 156.25 million US Dollars into land acquisition and heavy truck market expansion in south China.

The Demand of Specification, Type and Number of Different Ancillary Products: Auto body (10,000), vehicle frame (10,000 sets), automotive interior trim (10,000 sets), engine (10,000 sets), car axle (10,000 sets), tire (10,000 sets), etc

Total Annual Purchase of Ancillary Products: 125 million USDProject unit: Shanxi Automobile Changsha Huantong Automobile Making Co., LtdContact person: Huang ShiweiTel: +86-731-86842188

8Project name: Automobile Gearbox Project in Changsha National Economic and Technological Development Zone Project content:

The product of this Project, the automobile gearbox, is the important part of

automobiles. The implementation of this project has the very great significance to

development of vehicles and parts industry cluster in Changsha as well as Hunan

Province.

The Project Construction is proposed to use land 200 Mu (133,400 square meters),

and the initial construction content building is proposed: the raw material storeroom,

finished stock storeroom, packaging material storeroom, machine shop, assembly shop,

assembly and disassembly gearbox workshop and parking, maintenance shop of hermetic

gearbox, R & D laboratory of gearbox technique, office building and training center. Land

used for construction is planed 100,000 square meters. The Project will achieve annual

production capacity and maintenance service providing 150,000 automobile gearboxes.

Total investment: 78.13 million USD

Cooperation mode：joint venture, sole proprietorship

Project unit: Investment Promotion Cooperation Bureau of the Administrative Committee

of Changsha National Economic and Technological Development Zone

Contact：Chen Haiyan

Phone：86-731-84011108

Fax：86-731-84020036

Email: trade108@163.cn

9

Project name: The Investment Attraction for Engineering Machinery Ancillary Products

Project content：Zoomlion boats Quantang Industrial Park, Guanxi Industrial Park, and Luvalley

Industry Park and 5,000 employees with annual sales of 1875 million US Dollars, mainly specialized in three major series of products of 12-150T truck crane, 180-500T all terrain crane, and 50-3200T crawler crane.

The Demand of Specification, Type and Number of Different Ancillary Products: Various types of hydraulic motors, hydraulic valves, gear pumps, hydraulic cylinders, gear, wire rope, slewing ring, hook, engine, gearbox, axles, steering, tire rims,  two-bedroom and thin parts, drive shaft, Spring steel, outsourcing spare parts and fittings, standard parts, etc.

Total Annual Purchase of Ancillary Products: 132.82 million USDProject unit: Zoomlion Mobile Crane Branch CompanyContact person: Xiao XuejunTel: +86-731-85667042

10

Project name: Hydraulic System Industry Park Project content：

As the competitive industry in Hunan Province, the engineering machinery boasts a group of enterprises and products with high market competitiveness and good business prospects, which has maintained a rapid growth for seven consecutive years. Automobile industry has also developed rapidly in recent years, including 6 major categories of cars, trucks, SUV, special vehicles, buses, three-wheeled cars and other low-speed trucks. The main problems existed in engineering machinery and automotive industries are supporting shortage and narrow industry chain, and it is urgent to improve the ability of research, design and production of hydraulic system. 

Changsha National High-Tech Industrial Development Zone acquisitions a land area of 33.33 hectares to build a R&D and production base of hydraulic system in Luvalley sci-tech new town. It is expected to introduce leading enterprises with core technology to conduct supporting production for a number of car and engineering machinery enterprises.

Total investment: 312.5 million USDCooperation mode: Sole proprietorship, Joint venture, cooperationProject unit:  Administrative Committee of Changsha National High-Tech Industrial Development ZoneContact person: Liu SongjunTel: +86-731-88995652

24

Project name: R&D and Production Base Construction Projects for Key Automotive Components, Hubs and Brake Blocks

Project content：1. Establish institute of automotive parts and industrial park for key components of

electric automobile, including the industrial parks for EPS automatic switch, continuously variable transmission, fully mechanical automatic transmission, etc.

2. Construct automotive hub manufacturing base, and plan to cover a land area of 250 mu to build a production line with an annual output of 5 million of "13 -18" aluminum alloy hubs for automobile.

3. Construct a brake block manufacturing base with an annual output of 10 million sets, and plan to cover a land area of 30,000 square meters with construction area of 18,000 square meters.

Total investment: $ 923,080,000Cooperation mode: Sole proprietorship, joint venture, cooperationProject unit: Administrative Committee of Zhuzhou High-tech Zone: No.1, North of Zhuzhou Avenue, Tianyuan District, ZhuzhouContact person: Nie MinlinTel: +86-731-28818549, 13908430811

25Project name: Electric, Gas, and Oil Hybrid Vehicles ProjectProject content：

Zhuzhou Xianghuamei Electric Chu Xiangzhou invented and manufactured the world's first electric, gas and oil hybrid vehicles in July 2010, and obtained the national patent authorized by the State Intellectual Property Office in January 2011. It adopts strong electric design with plug-in module and can drive 80 kilometer under electric mode after charging for 8 hours with 220V civilian electric power. The automobile can alone be driven by gas or oil, also by electric-gas or electric-oil hybrid power. During idling, braking, stopping for passengers up and down under gas, oil mode driving, electric energy can be automatically recycled (independence innovation) with 70% of energy saving.

This patent technology can be applicable to buses, trucks, cars, mini vans, small tourist bus, sanitation trucks for removal and clean. Xianghuamei electric and hybrid vehicles are mainly used as small tourist buses, and supplemented by sanitation trucks. Such vehicles (hybrid power) are a blank in international and domestic field, so it is a revolutionary and "subversive" product.

The project is planned to locate in Zhuzhou Industrial Park and expropriate 100 mu of land to build an assembly line with an annual output capacity of 40,000 small tourist bus and sanitation trucks driven by electric and hybrid power. The construction period is one year.

Total investment: $ 45,690,000Cooperation mode: joint venture, cooperation, property rights transfer and otherProject unit: Zhuzhou Xianghuamei Electric and Hybrid Vehicles GarageContact person: Chu XiangzhouTel: 13077099702; Fax: +86-731 -28207228E-mail: C13077099702@163.com; Website: www.xhmhd.com

38Project name: Finished Mass Transit Vehicle Production Base ConstructionProject content：

Xiangtan Electric Manufacturing Corporation Ltd. is one of 520 national key enterprises. It is not only a key enterprise in electrical industry of China, but also a national major technical equipment domestication production base. Besides, it is the only enterprise in China that produces complete mass transit vehicle traction electric equipment (DC). In order to expand the market, the company plans to bring in strategic cooperators to find a joint venture with the purpose of building finished mass transit vehicle production bases in Hunan Province.

The project covers an area of 20 hectares. A light rail research, production and testing base will be established.Phase I project includes stock bogie, car body production area, assembly and commissioning, production auxiliary area, etc. to form an annual production scale of 300 various stainless steel railway vehicles. The long-term goal is to produce 600 annually.

Total investment: 93.75 million USDCooperation mode: Joint venture and cooperation; the fund introduced is controlled within 49%Project unit: Xiangtan Electric Manufacturing Corporation Ltd.Contact person: Liu YanhongTel: +86-731-58595248，58595156

ELECTRONIC INFORMATION11Project name: LCD ProjectProject content:

Implementation of the project can realize industry junction and match with the Software

Industry Base and Software Park of the Hi-Tech Zone and can form industry cluster with other

manufacturers of large LCD in Hunan Province, which will change the pattern of LCD production’s

being concentrated in Pearl River Delta, Yangtze River Delta and Beijing-Tianjin area at present.

The project complies with the state industry development policy and Hunan industry development

policy, and has good economic and social benefit.

The project land is located at Changsha Economic & Technological Development Zone, and

the planning area for the construction of the project is 200 mu, and the construction engineering

includes: accessories warehouse, finished products warehouse, production workshop, public

auxiliary facilities and office building etc. And the building area reaches 95,000 square meters. And

the annual production capacity will reach as many as 2 million sets of LCD when the project is

finished. When the project is all completed and put into production, a hi-tech industry cluster with

LCD as the core and joint participation of multiple kinds of enterprises will be formed, with products

involving MP3, MP4, GPS, mobile phone, computer LCD and glass substrate, and its annual

output value can reach 0.8 billion Yuan. The project investor can enjoy existing preferential

measures in terms of tax and land and so on of Changsha Economic Development Zone. In

addition, the Development Zone will provide more preferential policies according to the condition of

the investor, tax limit and development speed etc. As for the strategic investors not familiar with the

project industry, we will be responsible for contacting and assisting them to conduct various kinds

of matters. As for the investors with investment ability lower than the project requirement, we will

assist them to seek cooperation partners or to do well with project financing and so on according to

the requirements of the investor. The total investment of the project is 0.6 billion Yuan, in which the

fixed investment is 0.55 billion Yuan, and the base flowing capital occupies 0.05 billion Yuan. The

construction period of the project is one year, and the annual production of the overall planning is 2

million sets of LCD. When the project is completed, it is hopeful to realize an annual average sales

income of 0.8 billion Yuan and an annual average profit of 0.15 billion Yuan. The investment profit

rate is 25%, and investment recovery period (including the construction period) is 5 years.

Total investment: $90,910,000

Cooperation mode: Sole investment, joint venture, cooperation and others

Project unit: Investment Promotion & Cooperation Bureau of Administrative Committee of

Changsha Economic & Technical Development Zone

Mailing address: No.2, Sany Road, Xingsha, Changsha City, Hunan Province, China

Contact person: Chen Haiyan

Tel.: +86-731-84011108

13Project name: LED Industry Park Project content:

LED lighting, with its long-life-span, low-power consumption, a wide range of colours, safety guarantee and energy-saving and environment friendly qualities, is honoured to have brought about a third revolution of human lighting. Many countries in the world attach great importance to the research, development and production of LED. Japan realized its promotion of white light illumination from 1998 to 2002 with an expenditure of five billion yen, and the financial budget of the whole plan was six billion yen. And the “next-generation lighting plan”, made by the U.S. in 2000,was listed in Energy Act, which planed to replace55% incandescent lamps and fluorescent lamps with LED with an investment of 0.5 billion USD from 2000 to 2010. China is the No.1 production country and the No.2 export country of lighting electrical appliances in the world, and the semiconductor lighting Industry has a solid Industry foundation, therefore, LED of China will have huge development opportunity in the future. In order to accelerate the development of LED industry of Hunan, to promote rapid concentration of LED industry of the Park, and to form industry advantage, Changsha Hi-Tech Zone plans to construct “LED Industry Park” in Luvalley Science & Technology New City.

The planning area of the project is 2,000 mu. The Park mainly introduces industry chain enterprises of production of LED epitaxial wafer, preparation of LED chip, encapsulation of LED chip and application of LED products etc. to enter with emphasis, and cultivate a batch of leading enterprises with international competitiveness.

Total investment: $1,076,920,000 Cooperation mode: sole proprietorship, joint venture, and cooperationProject unit: Changsha High-Tech Industrial Development ZoneMailing address: No.668, Luvalley Avenue, Hexi, Changsha CityPost code: 410205Contact person: Liu ZilingTel: +86-731-88995020

14Project name: Wasion Electronic Product Ancillary Investment AttractionProject content：

Wasion Group Co., Ltd. is a leading energy metering equipment, system and service provider in China. It was listed on HKMB in December 2005. It was the first group in China that was listed beyond the mainland in energy metering and energy efficiency management specialty. It was also the first company listed in HKMB in Hunan Province. It won the titles of China Famous Trademark and China Famous Brand.

Expected ancillary enterprises and products：1. Equipped with plastic or electric meter terminal strip production capacity. Priority is given to suppliers with similar ancillary product manufacturing experience with this company; 2. Equipped with relatively favorable quality management and cost control capacity; 3. Equipped with more than 6 injection molding machines (above 180T) and capable of supplying at least 8K sets of ancillary products for this company on a daily basis; 4. Equipped with certain plastic mold repair and mold opening capacity; 5. Capable of carrying out ancillary production in the industrial park where Wasion Electronic is located or surrounding areas; 6. Capable of supplying more than 2,000 sets of packing boxes and other packing materials daily; 2-3 suppliers equipped with the abovementioned capacities.

Total Annual Purchase of Ancillary Products: 28.13 million USDCooperation mode: Sole proprietorship，cooperationProject unit: Wasion Group Co., Ltd.Contact person: Cai BingTel: +86-731-88619696

NEW MATERIALS39Project name: High-end Steel Deep Processing Industrial Park Project Project content:

Founded in 1958, Valin Xiangtan Iron & Steel Co., Ltd. now has realized annual steel output of 10 million tons and boasted complete technological equipment for coking, firing, ironmaking, steelmaking, mill bar and metal products through construction and development for more than 50 years. In 2010, the output of iron, steel and material was 7.7 million tons, 8 million tons and 7.4 million tons respectively and the group has realized sales revenue of RMB 40 billion Yuan.

Valin Xiangtan Iron & Steel Co., Ltd. is planning to requisite land of 1500 mu in Xiangtan High and New Tech Development Zone to focus on promoting and building seven finish machining industries such as line pipe, steel structure, fasteners, steel wire and cord thread, coil and cut-to-length, gas-protection welding wire and auto accessories steel, vigorously developing deep processing industry of steel for manufacturing and urbanization, making steel deep processing industry bigger and stronger and building the most influential “steel city” in central south area.

Total investment: $ 769,230,000 Cooperation mode: sole proprietorship Contact unit: Xiangtan High-tech Development Zone, Valin Xiangtan Iron & Steel Co.,

Ltd.Contact person: Li Qiang Gao Yan Tel: +86-731-58551397、58551399

LOGISTICS

15Project name: China (Changsha) Construction Machinery Trade CenterProject content:

As a mighty industry of Hunan Province, construction machinery has been growing rapidly for successive seven years, where SANY Group and Zoomlion, etc. are in front rank of the industry. According to the statistics of relevant authorities, this industry will keep the momentum of growth rate of more than 20% in future years. In accordance with the industrial planning of Hunan Province, it is estimated that the output value of Hunan construction machinery industry will reach 235 billion in 2015. Changsha Economic Development Zone is prepared to plan a national construction machinery trade center with high starting point and standard according to the current situation of machine building industry. The construction of this project contributes to improving circulation efficiency of construction machinery and reducing circulation cost; reducing purchasing cost of Hunan construction machinery manufacturers and increasing market competitiveness; comprehensively integrating construction machinery logistics resources in Hunan or even the whole country, improving systematization and modernization level of construction machinery logistics enterprises as well as benefits of operators.

The project enjoys a superior location and is located in Changsha economic and technical development zone with convenient transportation. It requires a total land area of about 2000 mu, of which 654 mu is for the first stage. This trade exhibition center consists of nine functional areas including construction machinery, 4S shop area, spare parts area, second-hand construction machinery trade area, maintenance and renovation area, logistics area, electromechanical equipment trade area, theme park, exhibition center and business supporting area (bank, office building, hotel and recreation, etc.) and will become the largest exhibition, trade and information release center of machinery industry in the country upon completion and the construction machinery trade exhibition center with international influence.

Total investment: $ 303,030,000 Cooperation mode: sole proprietorship, joint venture, cooperation and othersContact unit: Investment Promotion & Cooperation Bureau of Administrative Committee

of Changsha Economic & Technical Development Zone Mailing address: No.2 Xingsha Sany Road, Changsha City, Hunan Province Contact person: Chen HaiyanTel: +86-731-84011108

16Project name: Logistics Center of Changsha Railway of Guangzhou Railway (Group)

Corporation Project content:

In order to make Changsha a key railway freight hub of South China, the Ministry of Railways moved the south and north freight yard in Changsha City to Changsha Jinxia Economic Development Zone and planned to build new north railway freight station, which will be put into use in the first half year of 2011. Upon planning land of 973 mu near railway freight yard and outside of the marshalling station, Changsha Municipal Government and Guangzhou Railway (Group) Corporation will cooperate to develop and build Logistics Center for Changsha Railway of Guangzhou Railway (Group) Corporation, which will constitute a integrative logistics center of “railway, expressway, and waterway” for storage and transportation of goods with adjacent Changsha Newport and crisscross roads.

This project is located in east of Jinpen Avenue and north of Qingzhuhu Avenue in Changsha Jinxia economic development zone, covering an area of 973 mu. The project is 1.5km away from Changsha Newport in the west and 1.3km away from Changsha Jinxia Bonded Logistics Center. The No. 1 railway line of new freight north station is directly extended to this place. The project is planning to build special storage area, market trading area, port functional area, head office area and other functional areas, which are suitable to introduce strategic investors who are inclined to cooperate for development and construction. The cooperation period is not more than 10 years. The freight yard in this place can be either rented or enforced joint-stock cooperation mode.

Total investment: $ 227,270,000 Cooperation mode: joint venture, cooperation Project unit: Administrative Committee of Changsha Jinxia Economic Development ZoneMailing address: 6 F, Office Building of Changsha Jinxia Economic Development Zone, Furong North Road, Kaifu District, Changsha City, Hunan Province Contact person: Chen Liang Tel: +86-731-88482599 13974875688

17Project name: Changsha Ansha Logistics Park ConstructionProject content:Ansha Industrial Zone is adjacent to Beijing-Zhuhai Expressway and 107 National Road, and is only 7km away from Changsha National Economic and Technological Development Zone, is only 15km away from Huanghua Airport, the East Third Ring Road in construction (Beijing-Zhuhai Expressway double line) can reach Zhuzhou, Xiangtan; the south side is only 10km away from Xianing port which contains 8 thousand-ton-level berths, it owns good transport and location advantages. The project is located in Ansha Industrial Zone which lies in the southern part of Ansha town, with a planned area of 400 hectares. Specific construction includes five functional areas like automotive industrial area, industrial area of building materials, agricultural products distribution area, storage and freight logistics services area, comprehensive management services district, and four platforms like logistics infrastructure, information networks, management services, environmental policy.

Total investment: 1.125 billion USDCooperation mode: sole proprietorship, joint ventureProject unit：Administrative Committee of Ansha town industrial zoneContact persons: Zhou Xiangyang Yi ZhizhunTel: +86-731-84033758, 15875810581, 13974954328

26Project name: Development of Yanling Jiulong Logistics CentreProject content: The existing enterprises of Kowloon Economic Development Zone of Yanling County are 90, with population of 15,000, and annual rotation volume of freight transport is about 0.25 million tons. Now privately owned vehicle or small logistics companies are adopted by various enterprises for docking.It is proposed to integrate existing logistics resources and build a modern logistics center of Yanling County by absorbing Well-known logistics enterprises inside and outside the province to enter the development zone.The area of development of the first phase is 4.67 hectares, and management service, information trading, transport and storage and distribution services area shall be set. Designed annual cargo throughput is 8 million tons, storage capacity is 88,800 cubic meters, and the annual distribution is 3 million tons.

Total investment: 15.63 million USDCooperation mode: cooperation Project unit: Jiulong Economic Development Zone of Yanling CountyContact person: Shen XinwenTel: +86-13017332225

FOOD INDUSTRY

18Project name: Liquid Food Production BaseProject content:

1. The park, by adhering to creating Professional Food Industrial Park brand, to molding the industrial features of “Liquid Food Base”, has successfully introduced Unilever, Jiajia Group, Tsingtao Beer, Guangdong Meiyile, Taiwan Hongquan and other leading liquid foodstuff companies, having a favorable effect of converging liquid foodstuff brands and spurring the development. 2. The period with a GDP per capital above 3,000 USD is a period of rapid development of food industry. 3. In 2010, Ningxiang County achieved a total output value of 42 billion Yuan, an industrial output value of 80 billion Yuan and fiscal revenue of 2.5 billion Yuan. 4. The park is a focally programmed food industrial zone in Changsha City and Dahexi Pioneer District. It is also the China’s Food Industry Demonstration Zone awarded by National Food Industry Association of China. The food industry is one of the four groups with hundred billion Yuan in Changsha City and the biggest leading business in the park, contributing over 40% output values and taxes.

The project is located in the food industry park of the state-level Ningxiang Economic and Technological Development Park, under the support of Unilever, Jiajia Group, Tsingtao Beer, Guangdong Meiyile and Taiwan Hongquan to map out 2,000 mu of meat production and fine processing base. It is expected to introduce 15 leading enterprises, 5 of which have been introduced, and 3 intended to, mainly for liquid food.

Total investment: $ 692,310,000Cooperation mode: sole proprietary joint venture or cooperationProject unit: Ningxiang Economic Technological Development Park Mailing address: No.188, Ningxiang Avenue, Yutan Town, Ningxiang County, Changsha

City, Hunan Province. (Room 1106, Investment Inviting and Cooperation Bureau of the State-level Ningxiang Economic and Technological Development Park)Contact person: Peng FeiTel: +86-731-88981777

CONSTRUCTION OF INDUSTRIAL PARKS

19Project name: Airport New Town Construction Project Project content:

Changsha Huanghua Airport, located in Huanghua Town, Changsha County, eastern suburbs of Changsha City, is neighboring Changsha national-level economic and technical development zone and is 24.2km away from downtown. 84 airlines have been opened, including 6 international airlines with a passenger load of 10 million. It is in the front rank of central region. In 2011, the third-generation airport terminal of Huanghua Airport will be operated formally and the construction of the second track will be started comprehensively, thus Huanghua Airport will has stronger operation support capability and broader coverage.

As a new park started in 2010 by People’s Government of Changsha County, Changsha Airport Town will be constructed as a “knowledge-oriented modern service eco-city” in the subcenter between the provincial capital and the airport by surrounding the target of constructing regional international air hub, grasping the increasingly mature airport industry development opportunity and conforming to the trend of rapid growth of passenger and goods volume to become a new growth pole to promote rapid development of the economy of the county and even the city.

The planning scope of the Airport Town: west to Changsha-Zhuzhou expressway, east to airport connection line, north to Changsha-Yongzhou expressway, south to airport expressway, totaling about 31 km2. The planning leading industries of Airport Town: real estate based on ecological livable, headquarters building, top notch hotel, business and trade; modern service industry based on air logistics; and advanced manufacturing industry related to aviation.

Total investment: $ 2,909,090,000 Cooperation mode: Sole proprietorship joint venture, cooperation Project unit: Administrative Committee of Changsha Airport TownMailing address: Administrative Committee of Changsha Airport TownPost code: 410100Contact person: Cao Jianghui Tel: +86-731-84079179 13874899150

20Project name: Biomedicine Industrial Base Construction in Changsha High-tech

Zones Project content：

The total planning area of the base covers 133.33 hectares and the key introduced industries include: (1) focusing on introducing large and new type industrial projects such as influenza vaccine, BCG polysaccharide and other projects; supporting and developing antibody medicine like anti-neoplastic medicine, blood products, diagnostic reagent for syphilis and hepatitis, etc. (2) focusing on introducing TCM protection varieties and national level new drugs as well as drugs for treatment of severe disease, actively introducing secondary TCM development projects and supporting high quality traditional Chinese herbal medicine. (3) focusing on introducing ultrasonic testing system and developing diagnostic reagent and supporting instruments.

Total investment: $ 441,180,000 Cooperation mode: sole proprietorship, joint venture or cooperation Project unit: Administrative Committee of Changsha High-Tech Industrial Development

ZoneMailing address: No.668, Hexi Luvalley Avenue, Changsha City Post code: 410205Contact person: Chen Ying Tel: +86-731-88995093 13873100800

21Project name: Luvalley Motor CityProject content:

Hunan has become the fastest growing market for family cars in central areas, and the fact that development progress of provincial capital Changsha and emerging city Zhuzhou and Xiangtan from the second or third line market to the first-line auto consumer market has vividly explained this point. In 2008, car sales of Hunan Province reaches 210,000, among which passenger car sales are 142,500, including 54,000 cars of sales in Changsha, the provincial capital. At present, it is planning to develop and construct the project of Luvalley Motor City in high-tech zones of Changsha.

The project occupies a total land area of 100 hectares, including convention centers, business hotels, comprehensive accreditation hall, brand automobile 4S shops, testing track, theme parks, cultural centers, accessories and supplies market, used car sales market, logistics centers, bonded warehouses, etc.

Total investment: 937.5 million USDCooperation mode: Sole proprietorship, joint venture, cooperationProject unit: Administrative Committee of Changsha National High-Tech Industrial Development Zone Contact person: Li XiaoyangTel: +86-731-88995150

22Project name: Logistics Ancillary Investment Promotion of Qingzhu Lake Services Outsourcing Bases Project content:

The short-range plan area of Qingzhu Lake Demonstration Base for Service Outsourcing is about 66.67 hectares which is used for constructing the Software R & D Industrial District, training areas, comprehensive business office district, supporting district for business, entertainment, residential, service and other complex.

Project planning area is 7.71 hectares, the net land area is 4.02 hectares, and the total construction area is 105,250 square meters. Volume rate is 2.25, greening rate is 42.5, and building density is 27.4%. Of which, the venture building covers an area of 20,500 square meters, the youth apartment covers an area of 41,850 square meters and business assemblies cover an area of 4,700 square meters. Five-star business hotel covers an area of 30,600 m2, and area of the villa is 2800 square meters.

Total investment: 93.75 million USDCooperation mode: sole proprietorship, cooperationProject unit: Changsha Qingzhu Lake Ecological Technology (Industrial) ParkContact person: Deng TingTel: +86-731-84871168

23Project name: Production Base of Shanmao & Jimi Animation Game and Music Project content:

Production base of Shanmao & Jimi animation game and music was proposed and planned by Hunan Shanmao Cartoon Co., Ltd., and through many discussions, its maneuverability, low risk, income rate of return are well recognized and appreciated by specialists and scholars within industry.

The total area of the base is 200 hectares, relying on strong brand advantage and technology strength of Shanmao cartoon, an comprehensive animation base integrating R & D of animation technology, animation program production, research, development, production and sales of animation derivatives, training of animation artists, sightseeing of tourist attractions, trade and residence, undertaking of Sports events and other functions is intended to be built.

Total investment: 593.75 million USDCooperation mode: sole proprietorship, cooperationProject unit: Hunan Shanmao Cartoon Co., Ltd.Contact person: Manager Wu, Manager CaoTel: +86-13507441188, 13467547484

27Project name: China Children Fashion Innovation Industrial Park Project content:

Through the development and accumulation of thirty years, “Foshan Children Wear” has become a well-known national industrial brand. Dafoshan region, gathering more than 6000 children wear enterprises and more than 8000 children wear supporting enterprises, has become the children wear industrial base for children wear brand operation, process and production with highly concentrated children wear resources and the largest scale both at home and abroad, where there are more than 50 enterprises with sales revenue of above RMB 100 million, more than 400 enterprises with sales revenue of above RMB 50 million and more than 2000 enterprises with sales revenue of above RMB 10 million, with annual output of over 900 million pieces and more than 600,000 employees. Under the new situation of updating of clothing industry, “Foshan Children Wear” proposed the planning of “China (Foshan) Children Fashion Cultural Innovation Park” based on self-improvement. And “Lusong Clothing” proposed the idea of building “China Children Fashion Innovation Industrial Park” in the meantime under the great support of China National Textile and Apparel Council and China National Garment Association while it was eager for new breakthrough in industrial chain and capacity. Upon deeply knowing “Lusong Clothing”, “Foshan Children Wear” considered that the industrial resources, investment environment, policy support and employee guarantee, etc. provided by “Lusong Clothing” are just the development foundation for its integral improvement. Thus, “Lusong Clothing” and “Foshan Children Wear” join hands in cooperation to develop “China children wear” at higher starting point and in broader fields.

China Children Fashion Innovation Industrial Park, with a total planning area of about 2080 mu , is located in Longquan Region of Lusong District, east of east link, besides Zhejiang-Jiangxi Railway and is connected with 320-national highway in the north. China Children Fashion Innovation Industrial Park displays headquarters economic elements in function setting, including “design innovation”, “brand incubation”, “talent cultivation” and “culture construction”, organically integrates children wear industry, children supplies industry and children cartoon industry and the functions of office, exhibition, R&D, production, marketing and release, etc; As for children wear products categories, their cover children gifts, children toys, children learning tools, audio- video books and wisdom education, etc. China Children Fashion Innovation Industrial Park focuses on introducing children wear design and research, production and marketing agency (company), national-level children cultural promotion agency and unit, cartoon, picture, and audio-video product fabricating team and international and domestic children product marketing agency, etc. In the earlier stage, it plans to introduce thousands of well-known children wear design and research, production and marketing agencies (companies) to drive lots of supporting

enterprises to enter the park or surrounding of the park for cooperation. China Children Fashion Innovation Industrial Park will be built in 2011 with a total investment of about RMB 4 billion Yuan, part of the park will be completed in 2012 and comprehensively construction will be put into operation in 2015, with an estimated annual production value of above RMB 20 billion Yuan.

Total investment: $ 384,620,000Cooperation mode: sole proprietorship, joint venture or cooperation Project unit and mailing address: Government of Lusong District, Zhuzhou City Contact person: You Bo Tel: +86-731-28580601、13975334300

28Project name: Electronic Information Industrial ParkProject content:

To bring in well-known electronic information enterprises at home and overseas to invest in Zhuzhou, laying the stress on the development of consumer electronics, LED lighting, new flat panel display, software and information services etc.

Total investment: 50 million USD Cooperation mode: sole proprietorship, joint venture, cooperationProject unit: Adiministrative Commission of Zhuzhou Hi-tech Industrial Development

ZoneContact person: Nie MinlinTel: +86-731- 28818549, 13908430811

29Project name: Ceramic Technology Heritage and Research Project Project content:

As the cradle of Chinese underglaze colorful ceramic art and enjoying good reputation both at home and abroad, Liling should carry forward this traditional technique, innovate and explore new ceramic fields and build a strong Liling ceramic industry.

1. To build Chinese underglaze colorful ceramic industrial park, mainly including R & D and creation, production and marketing, exhibition of base for underglaze colorful ceramic complete with facilities for business finance, hotel and catering, business and residential building and entertainment, etc.

2. To build underglaze colorful ceramic production technique heritage research center, technique exhibition hall, product exhibition hall and ceramic technical masters’ studio in thirteen non-heritage bases in the whole city.

3. To build manufacturing center for standard mud, glaze and mould. To supply standard mud, glaze and mould with different grades facing the whole industry and to promote industry specialization by uniformly manufacturing mud, glaze and mould.

4. To build new material special ceramic industrial base, mainly including the bases of ceramic anilox roll, ceramic industrial valve and zirconia.

Total investment: $ 479,360,000Cooperation mode: joint venture Project unit: Administrative Committee of Liling Ceramic Industrial Park Contact person: Zhang Xinchao Tel: +86-731-23252708

30Project name: New Energy Industrial Park of European Industrial Park Project content:

To bring in domestic and foreign enterprises engaged in solar energy development or utilization and wind energy equipment manufacturing.

It's to be built into a large-scaled comprehensive New Energy Industrial Park in Hunan, comprising wind energy industry zone, solar industrial zone and new battery industry zone.Total investment: 50 million USD Cooperation mode: joint venture, cooperationProject unit: Adiministrative Commission of Zhuzhou Hi-tech Industrial Development

ZoneContact person: Nie MinlinTel: +86-731- 28818549，13908430811

31Project name: Shengnong Industrial Base for Traditional Chinese Medicine ModernizationProject content:

To bulid a modernization industrial base of Chinese medicine, including the Food and Drug Logistics Park, R & D Industrial Park, Chinese herbal medicine plantation, Futures Center (referred to as "three parks plus one center ").

Total investment: 76.92 million USD Cooperation mode: sole proprietorship, joint venture, cooperationProject unit: Adiministrative Commission of Zhuzhou Hi-tech Industrial Development

ZoneContact person: Nie MinlinTel: +86-731- 28818549, 13908430811

32Project name: General Aviation Industrial Park Project content:

To strengthen cooperation with domestic and foreign leading aviation enterprises on the existing industrial base, introduce advanced aviation equipment manufacturing enterprises, with its goal as building a R&D and production base for full-range civilian small- and medium-sized aircraft engines and general aircraft production, the only one in China.

Total investment: 100 million USD Cooperation mode: joint venture, cooperationProject unit: Zhuzhou Dongjiaduan Hi-tech Industrial ParkContact person: Xu MinTel: +86- 0731-28580288, 15073300860

33Project name: Base Construction Projects for New Materials and Special Ceramic Industry Project content:

The ceramic industry in Liling City has been included on the priority list of developing ten key basis industries in Hunan Province. Liling municipal committee and government are planning to develop the ceramics to a 100-biliion level industry in the end of "Twelfth-five" plan. The development of new materials and special ceramics will be the focus of future development of Liling industries, and enhancement of the technological content of products and optimization the industrial structure will be given priority.

Industrial bases construction of ceramic anilox roller, ceramic industrial valve and zirconia ceramic.

Total investment: 62.5 million USDCooperation mode: Sole proprietorship, joint venture, cooperationProject unit:  Hunan Tai Sun Ceramics Co., Ltd, Hunan Zhengyang Fine Ceramics Co., Ltd, Liling Kexing Industry Co., Ltd, Karpery Industrial Co., Ltd, Hunan China.Contact person: Pan Junming, Huang Hongwei, Ding Boping, Xiao Bangyang, Wang Xifeng.Tel: +86-13907413777；13907414332；13907413092；13907413409；13907415847

34Project name: Industrial Park for Chinese private enterprise industriesProject content:

To build a Specialty Industrial Park, with a land of about 8,000 to 10,000 mu. According to land division, Zhejiang, Fujian and Taiwan business are invited to invest emerging industries of and high-tech manufacturing industry.

The project is operated under development phases by the market-oriented operation mode.

Total investment: 1538.64 million USDCooperation mode: sole proprietorship, joint venture, cooperationProject unit: Adiministrative Commission of Zhuzhou Hi-tech Industrial Development

ZoneContact person: Nie MinlinTel: +86-731- 28818549, 13908430811

35Project name: Infrastructure Construction Projects for Zhuzhou Qingshuitang Circular Economy Industrial ParkProject content:

Over the past years, Zhuzhou Qingshuitang Circular Economy Industrial Park are mainly dotted with heavy industries of non-ferrous metals, basic chemicals, building materials, and energy industry, the extensive traditional production methods of which result in a serious structural pollution. To find the fundamental solution for the environmental pollution problems, it is urgent to transfer the mode of development and revitalize the old industrial base by sustainable development.

The project will occupy a land area of about 16 square kilometers and the main construction contents are shown as follows:1. Expanding the network of water and electric circuits in the park as well as the landscaping, and starting the water reuse project in the park;2, Restore the ecological construction at Xiang River Scenic spot;3, The land acquisition and resettlement of households living in the park and the development of 200 hectares of commercial and residential land.

Total investment: 281.25million USDCooperation mode: Sole proprietorship, joint venture, cooperation, BOT, BTProject unit: Zhuzhou Circular Industry Development Co., Ltd; Investment Promotion Bureau of Shifeng DistrictContact person: Yan Xiaojun, Li ShuminTel: +86-731-22629832

40Project name: The Ancillary Project for New Energy Industry of Xiangtan Electric Manufacturing Corporation Ltd. Project content:

Xiangtan Electric Manufacturing Corporation Ltd. enjoys the reputation of “Cradle of Chinese Machinery and Electric Products” and is included in the list of “National 156 Key Construction Projects” in the “First-five” plan. After decades of development, it has become the backbone of China's electrical industry, production and R&D base of major technical equipment and designated manufacturers of national defense equipments.

It is expected to acquisition a land area of 300 acres in Xiangtan National Hi-tech Industrial Development Zone, to build many ancillary projects including bearings, cables, structural components, wind energy, logistics, materials trading, mold, equipment, electric vehicles, solar energy, electrical power control, and business supporting. Total investment: 1562.5 million USDCooperation mode: sole proprietorship, cooperationProject unit: Xiangtan National Hi-tech Industrial Development Zone, Xiangtan Electric Manufacturing Corporation Ltd.Contact person: Wang YangTel: +86-731-58551397

INFRASTRUCTURES36Project name: Infrastructure Construction Projects for Zhuzhou Rail Transport City Project content：

In the strategic concept of revitalizing the equipment manufacturing industry in the country, stimulating domestic demand and economic integration of Changsha, Zhuzhou and Xiangtan as well as test area of the two-oriented society, as a transport hub of southern railway, Zhuzhou City enjoys the reputation of "cradle of Chinese electric locomotives", so development of rail transportation industry will be important to enhance the economic section of Zhuzhou.

Phase I (2009-2011): Develop a core policy area of 6 square kilometers (including the existing 1 square kilometer), the leading direction is for the mechanical and electrical integration industry of the electric locomotive, rail transportation equipment, electric drive and control systems and other industries.

Phase II: Develop an area of 10 square kilometers, and the leading direction is for the new material industry. Contents of co-development and construction are as follows:

1. Widen 24m to Tianlin Road, the park road interchange with Zhuzhou-Huanghua high-speed lines, the outer circle line, and Shanghai-Ruili high-speed line;

2. Expand substation capacity from 100kVA to 200kVA at Lizipo;3. Add a water pipe of 500 mm, and construct a sewage treatment plant; 4. Complete the land to be leveled and conduct capital construction according to

"seven availabilities and one leveling" in the first period;5. Construct a standard workshop of 100 thousands square meters in Tianxin High-

tech Development Area.

Total investment: $ 307,690,000Cooperation mode: Sole proprietorship, joint venture, cooperationProject unit: Investment Promotion Bureau of Shifeng District, Zhuzhou CityMailing adress: sfqzsj123@126.comContact person: Tang Puli, Li ShuminTel: +86-731-22629832

37Project name: Distributed Energy Station of Yunlong Demonstration ZoneProject content:

The distributed energy station is to use natural gas as a fuel for power generation while providing steam and employ geothermal technology to provide air-conditioning cold water (or air) and other energy service systems, avoiding losses of long-distance transmission of power and heat. The station could also provide central heating and cooling servcie for residential customers in nearby communities.

The project is to build an energy station with natural gas, clean coal-water slurry as fuel in the Vocational Education City and nearby big communities, to promote the integration of energy supply, resource utilization and environmental protection by means of comprehensive utilization of biomass energy.Total investment: 30.77 million USDCooperation mode: joint venture, cooperationProject unit: Adiministrative Commission of Yunlong Demonstration ZoneContact person: Chen JianxiongTel: +86-13387330722

PHOTOVOLTAIC12Project name: Photovoltaic Industry BaseProject content:

The Chinese economy develops rapidly, and the ranking of economic aggregate rises continuously —— GDP ranks the fourth in the globe. However, in spite of the rise of GDP ranking, China has become the second biggest energy consumption country in the world, and development of new energy industry has become the “strategic industry” concerning the sustainable development of both the society and the economy of China. Photovoltaic industry is a new energy industry based on solar energy.

In 2008, output value of the photovoltaic industry of Changsha, Hunan reached 5 billion Yuan, among which, silicon ingot/silicon wafer reaches 0.3 billion Yuan, solar battery/components 1.4 billion Yuan, photovoltaic engineering and photovoltaic application products 0.4 billion Yuan, equipment manufacturing 0.3 billion Yuan, and others 0.3 billion Yuan. In order to promote accelerated development of the photovoltaic industry of Changsha and promote optimization and upgrading of the Industrial cluster structure, the Municipal Party Committee and Municipal Government decided to establish Changsha Photovoltaic Industry Base Hi-Tech Zone Luvalley Science & Technology New City in Changsha.

Planning area of the base is about 236 hectares, among which industry land occupies 215 hectares. Research, development and production of solar energy silicon wafer, battery plate, battery components and module, energy storage and application products and photovoltaic power generation system etc. are conducted with emphasis.

Total investment: $1,230,770,000 Cooperation mode: Sole proprietorship, joint venture, cooperation, Project unit: Changsha High-Tech Industrial Development ZoneMailing address: Room 502, 5th Floor, Xicheng Group, No.888, Dujuan Road, Yuelu

District, Changsha CityPost code: 410205Contact person: Huang JingTel: +86-731-88137117, 13874984518

ECONOMIC & INFORMATION TECHNOLOGY COMMISSION PROJECTS

“Sino-Europe Negotiation Week” Industrial Cooperation

Company: Xiangtan Electric Manufacturing Group

Contact person: Zhao Wenhong

Name of participant

Xiangtan Electric Manufacturing

Corporation LtdIndustry Equipment manufacturing

Leading products

Electric machine series

Wind generator series

Mine haulage equipment

Light rail transit equipment

Cooperation with EU

Major partner

countries Holland, Czech, Bulgaria

Main approaches

to cooperation

Investment ■ import ■

procurement ■ sales ■

Technical cooperation □

others □

Main cooperation

productWind generating set

Main cooperation intention: wind farm interest acquisition and development & construction project, including wind generating set manufacturing; approach of cooperation: investment; cooperation content: purchase 10 wind farm projects with total capacity of 927.5mn, and make development & construction to wind farm.

“Sino-Europe Negotiation Week” Industrial Cooperation

Company: Marketing Department of CNGC Jiangnan Machinery (Group) Co., Ltd

Contact person: Qi Zhenwei

Name of participant

Jiangnan Machinery (Group) Co., Ltd Industry Equipment manufacturing

Leading products

New energy- equipment product

Cooperation with EU

Major partner

countries

Main approaches

to cooperation

Main cooperation

productMain cooperation intention:For CNG cylinder for vehicle, intelligent CNG tank car for storage transportation and gas-filling, integrated hydraulic CNG filling sub-station, primary CNG filling station, and CNG filling machine, joint ventures and cooperation will be available. The main cooperation projects are as following: (1) natural gas hydraulic sub-station project – RMB 200 million Yuan of total investment (including qualification certification), acquiring qualifications of natural gas hydraulic sub-station construction and equipment manufacturing, forming annual capacity of 100 sets of natural gas hydraulic sub-station system; (2) small skid mounted natural gas liquefaction plant project - RMB 200 million Yuan of total investment (including qualification certification), acquiring qualifications of small skid mounted natural gas liquefaction plant construction and equipment manufacturing, forming annual capacity of 50 sets of natural gas hydraulic sub-station system; (3) LNG filling station, liquefaction plant and other application projects - RMB 300 million Yuan of total investment (including qualification certification), acquiring qualifications of various LNG application projects construction, forming annual capacity of 20 sets of various LNG application projects.

“Sino-Europe Negotiation Week” Industrial Cooperation

Company: Yiyang Zaichao Powder Metallurgy Co., Ltd

Contract person: Fu Fangzheng

Name of participant

Yiyang Zaichao Powder Metallurgy

Co., LtdIndustry Vehicle

Leading products Oil pump Cooperation

with EU

Major partner

countries Italy

Main approaches

to cooperation

Investment □ import ■

procurement □ sales □

Technical cooperation ■ others

□

Main cooperation

productOil pump

Main cooperation intention: Technical cooperation on oil pump

“Sino-Europe Negotiation Week” Industrial Cooperation

Company: Hunan Yiyang Xintai Vehicle Seat Sofa Co., Ltd

Contract person: Luo Jianguang

Name of participant

Hunan Yiyang Xintai Vehicle Seat

Sofa Co., LtdIndustry Equipment manufacturing

Leading products Vehicle sofa seat Cooperation

with EU

Major partner

countries Italy

Main approaches

to cooperation

Investment □ import ■

procurement ■ sales □

Technical cooperation ■ others

□

Main cooperation

productVehicle sofa seat

Main cooperation intention: Cooperation field: Vehicle sofa seat Cooperation approach: technology appraised as capital stock Cooperation content: R & D of Vehicle sofa seat