AUTOP 2013

7/28/2019 AUTOP 2013

1/62

7/28/2019 AUTOP 2013

2/62

All from a to .z

Inground is always possible!

Since more than 25 years autop is the specialist for the installation of inground lifts in existing

workshops. Thus we show that this is possible without any problem. With our long experience we found

solutions for nearly all conditions of the ground. The autop service team offers the civil works, assembly

and service.

Start Situation Professional desassembling Define position of the new workstation

Defining of the lifts position Cutting of the concrete

7/28/2019 AUTOP 2013

3/62

Digging with our own machines

7/28/2019 AUTOP 2013

4/62

Final assembly

7/28/2019 AUTOP 2013

5/62

Toujoursbien plac!

La plateorme est trs solide et acile daccs par sa hauteur rduite. Les

plateaux ajustables en longueur permettent le levage dune large gamme de

voitures.

La plateorme Pv est galvanise en srie et ore ainsi une sthtique de longue

dure.

Pratiques accessoires comme les cles dappui permettent un levage

proessionnel en toute scurit.

autop Sololift 1.35 Pv120-180, 140-200, 160-220

...une entreprise du groupe STENHJ!

autop Maschinenbau GmbH

Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25

E-Mail: [email protected]

www.autop.de

7/28/2019 AUTOP 2013

6/62


Et en plus.........Nos technico-commerciaux se mettent votre disposition pour toutes demandes deplanifcation et modernisations.Veuillez nous contacter !

Donnes techniques:

Capacit de levage: 3.500 kg

Course du vrin: 1.800 mm

Hauteur de levage: 1.930 mm

Dure de monte/descente: env. 30 sec.

Diamtre du cylindre: 123 mm

Proondeur de la ondation: 2.400 mm

Branchement: 400 V / 50 Hz/16 A

Groupe moto-pompe: 3,0 kW

Sololift 1.35 Pv

Couleur standard:

galvanis et paint RAL 9006

Vrin invers en acier alli avec

surace chrome dureBride de guidage en aluminium coul

sous pression pour viter la corrosion

Commande lectronique

Descente durgence pneumatique

Dispositi anti-rotation intgr

Installation dans une cassette tanche

Livraison avec de lhuile cologique

Option:

les ttes en xy augmentent le conort

et la plage de levage

Composants:


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de

Sousrservedemodifcationstechniques-position12/09

7/28/2019 AUTOP 2013

7/62

Toujoursbien plac !

Le mono-vrin autop Sololit Sa a ait ses preuves dans le domaine de la carros-

serie et de la maintenance.

La capacit de levage de 3500 kg et les bras tlescopiques permettent un levage

proessionnel dune grande gamme de voitures.

Le verrouillage automatique des bras est un systme erm et ainsi labritdendommagement.

autop Sololift 1.35 Sa



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

8/62


Service:Nos technico-commerciaux vous assistentpour la planifcation et ralisation pour les con-structions neuves et des modernisations.Contactez-nous!

Sololift 1.35 Sa

Composants:

Donnes techniques:


Course des vrins: 1.800 mm

Hauteur utilisable: 1.895-2.220 mm

Avec patins standard: 1.935-1.995 mm

Diamtre du vrin: 123 mm

Monte/Descente: env. 30 sec.


Proondeur ondation: 2.400 mm

Branchement: 230/400 V/ 50 Hz/ 16A

Cylindre invers chrom-dur

Guide du vrin en aluminium coul

sous pression

Contrle lectronique



Huile cologique en standard

Pr-montage dans la cassette avec

dispositi anti-rotation

Option:

Grand choix de patins dappui

Couleur standard:

RAL 7016 ( gris anthracite )

ou au choix

RAL 5019 ( bleu )


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de

dition12/2011-Sousreservedemodifcations!

7/28/2019 AUTOP 2013

9/62

Toujoursbien plac !

Le mono-vrin autop Sololit Sa a ait ses preuves dans le domaine de la carros-

serie et de la maintenance.

La capacit de levage de 3500 kg et les bras tlescopiques permettent un levage

proessionnel dune grande gamme de voitures.

Le verrouillage automatique des bras est un systme erm et ainsi labritdendommagement.

autop Sololift 1.35 Saa



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

10/62



Sololift 1.35 Saa

Composants:

Donnes techniques:




Avec patins standard: 1.935-1.995 mm

Diamtre du vrin: 123 mm




Branchement: 230/400 V/ 50 Hz/ 16A

Cylindre invers chrom-dur

Guide du vrin en aluminium coul

sous pression

Contrle lectronique




Pr-montage dans la cassette avec

dispositi anti-rotation

Option:


Couleur standard:


ou au choix

RAL 5019 ( bleu )


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de


7/28/2019 AUTOP 2013

11/62

Always onthe top!

The autop Sololit 1.30 Fv Uni is especially suitable or washing, general mainte-

nance and reconditioning o used cars.

Easy access and liting. The Sololit Fv Uni is a very exible lit; the liting area can

e.g. be modied to suit vehicles with long wheel bases, by either re-positioningthe adaptors, or alternatively tting more adaptors.

With a minimum height o only 80 mm the Sololit Fv Uni is suitable or also very

low vehicles.

The lit is hot galvanized so as to ensure long lie and reliable operation.

autop Sololift 1.30 Fv Uni

...a company o the STENHJ-group!


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

12/62

...a company o th e STENHJ-group!

Service:Our expert consultants would appreciate tohelp you with the planning o a new garageor the modernization o an existing one. Weofer to work out a workshop concept incl. anequipment proposal.Please do not hesitate to contact us!

Technical data:

Capacity: 3,000 kg

Cylinders diameter: 123 mm

Liting/lowering time: appr. 30 sec.

Stroke length: 1,800 mm

Liting height: 1,820 mm

Foundation depth: 2,400 mm

Voltage: 230/400 V

50 Hz

16 A

Power unit: 3.0 kW

Superstructure

Length, short version: 4,240 mm

Length, long version: 4,750 mm

Width: 1,050/2,090 mm

Height: 20/80 mm

Wheel base

short version: 1,800-3,400 mm

long version: 1,800-3,900 mm

Sololift 1.30Fv Uni

Standard:

hot-galvanized

hard-chromed cylinder

corrosion-ree guiding elementSPS - control unit

pneumatic emergency drain

installation in waterproo cassette

use o bio-oil non hazardous to

water

on-oor superstructure with hot gal-

vanized sturdy welded rails

Components


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de

Noliabilityacceptedorspecicationsthataresubjecttoalteration-validity07/2011.T

hedateandpicturesinthisproductinormationarenotbindingandareonlygivinganapproximatedescription.

Moreoverwereservethe

rightodiferencesbetweenthegoodsdeliveredandthedateandpicturesgivenhere(i.e.technicaldata,equipment,materialandopticalappearance)soarasthediferencesarereasonableorthecustomerandapossible

re

ductioninvalueothegoodsdeliveredisnotconsiderable.

7/28/2019 AUTOP 2013

13/62

Qualit auprix raisonable!

Le pont Eurolit 2.30 Pv rparation est un pont hydraulique simple et robuste,

appropri pour un levage dune large gamme de vhicules. Il ore galement

scurit et ergonomie.

La plateorme Pv ore un levage simple et rapide par un ajustement des pla-teaux en longueur.

Pratiques accessoires comme les cles dappui permettent un levage

proessionnel en toute scurit.

autop Eurolift 2.30 Pv140-200, 160-220



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

14/62


Et en plus....Nos technico-commerciaux se mettent votredisposition pour toutes demandes de planica-tion et modernisations.Veuillez nous contacter !

Eurolift 2.30 Pv

Composants:

Donnes techniques:


Espacement des cylindres: 1.335 mm




Diamtre des cylindres: 2 x 123 mm


Branchement: 400 V / 50 Hz/16 A


2 vrins inverss en acier alli avec

surace chrome dure

Brides de guidage en aluminium coul




Barre fexible de synchronisation et de

scurit

Signal sonore au lieu de protecteurs

de piedsInstallation dans une cassette tanche

Livraison avec de lhuile cologique

Option:les ttes en xy augmentent le conort

et la plage de levage

Couleur standard:

galvanis chaud


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de

Sou

srservedemodifcationstechniques-position12/09

7/28/2019 AUTOP 2013

15/62

Le justechoix!

Le pont jumeaux autop Masterlit Pv ore un levage proessionnel dune grande

gamme de voitures.

Un levage rapide est donn par les plateaux ajustables en longueur et les patins

dappui stables assurent la scurit.

La barre de synchronisation exible et le contrle lectronique avec signalsonore reduisent la maintenance au minimum.

autop Masterlift 2.35 Pv / Pv xy120-180, 140-200, 160-220

...une entreprise du groupeSTENHJ!


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

16/62


Service:Nos technico-commerciaux vous assitent pourla planifcation et ralisation pour construc-tions neuves et de modernisations.Contactez-nous!

Masterlift 2.35Pv ou Pv xy

Composants:

Donnes techniques


Distance entre pistons: 1.335 mm


Hauteur utilisable: 2.020 mm





Branchement: 230/400 V/50Hz/16A

Deux vrins inverses chroms-durs

Guides non-corrosis

Contrle lectronique


Dispositi de synchronisation/scurt

exible



Option:Ttes en xy

Couleur standard:

Standard: galvanis chaud

Premium: galvanis et paint RAL

9006 blanc-aluminium


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de


7/28/2019 AUTOP 2013

17/62

La formulepass-partout!

Le pont jumeaux Masterlit 2.35 Saav 135 dispose de bras double-tlescopiques

et peut tre ajust en longueur et largeur. Ainsi il est le pont le plus exible sur

le march utilisable de la petite voiture de ville la grande limousine, du tous-

terrains la vhicule utilitaire longue.Le grand choix de patins dappui assure un levage proessionnel et en tout s-

curit.

autop Masterlift 2.35 Saav 135



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

18/62



Masterlift 2.35Saav 135

Composants:

Donnes techniques





Patins standard: 2.045-2.085 mm





Branchement: 230/400 V/50Hz / 16A

Deux cylindres inverss chroms-durs

Guides non-corrosis

Contrle lectronique



exible



Jeu de bras:

Double-tlescopiques Ajustables en largeur

Patins dappui ajustables en hau-

teur

Verrouillage automatique des bras

Option:


Couleur standard:

RAL 7016 ( gris-anthracite )

ou au choix

RAL 5019 ( bleu )


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de


7/28/2019 AUTOP 2013

19/62

The hard-ware for your

bodyshop!

This lift allows a comfortable repair of damaged vehicles with a straightening

bench. The requirements for a body repair lift are:

free access to all sides of the vehicle

drive-in with a straightening bench without obstacle exible and variable swivel arms

comfortable lifting of the vehicle even with a straightening bench

security arm locking system

Very exible lift for body repair.

autop Masterlift 2.30 Sav 230

...a company of the STENHJ-group!


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

20/62

...a company of th e STENHJ-group!

Service:Our expert consultants would appreciate tohelp you with the planning of a new garageor the modernization of an existing one. Weoer to work out a workshop concept incl. anequipment proposal.Please do not hesitate to contact us!

Technical data:

Capacity: 3,000 kg

Piston distance: 2,285 mm

Cylinders diameter: 2 x 123 mm

Lifting/lowering time: appr. 30 sec.


Lifting height, dep. on lifting pads: 2,075-2,125 mm


Voltage: 230/400 V

50 Hz

16 A

Power unit: 3.0 kW

Masterlift 2.30Sav 230

Standard colour:

RAL 7016 ( grey anthracite )

on request

RAL 5019 ( blue )

two hard-chromed hydraulic cylinders

corrosion-free guiding elementsSPS - control unit


exible synchronizing and safety

device

installation in waterproof cassette

use of bio-oil, non hazardous to

water

two on-oor platforms with four

telescopic swivel arms on traverses,

in length adjustable, incl. four screw

pads 120 mm and height adjustable

125-175 mm

Components


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de

Noliabilityacceptedforspecicationsthataresubjecttoalteration-validity07/2011.T

hedateandpicturesinthisproductinformationarenotbindingandareonlygivinganapproximatedescription.


rightofdierencesbetweenthegoodsdeliveredandthedateandpicturesgivenhere(i.e.

technicaldata,

equipment,materialandopticalappearance)sofarasthedierencesarereasonableforthecustomerandapossible

re

ductioni

nv

alue

ofthe

goodsdelivered

isnotconsiderable.

7/28/2019 AUTOP 2013

21/62

The rightchoice!

The autop Masterlit 2.35 Saa 135 Universal is a swivel arm lit which has been

designed especially or passenger cars, o-roaders and transporters.

The automatic and completely closed arm locking system oers a high level o

security.A wide range o liting pads assures a sae positioning and liting o dierent

types o cars with this autop lit; the double telescopic swivel arms make a big

liting area possible.

autop Masterlift 2.35 Saa 135



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

22/62


Service:Our expert consultants would appreciate tohelp you with the planning o a new garageor the modernization o an existing one. Weoer to work out a workshop concept incl. anequipment proposal.Please do not hesitate to contact us!

Technical data:

Capacity: 3,500 kg





Liting height, dep. on liting pads: 2,045-2,370 mm

Standard: 2,045-2,085 mm


Voltage: 230/400 V

50 Hz

16 APower unit: 3.0 kW

Masterlift 2.35Saa 135

Standard colour:


on request

RAL 5019 ( blue )


corrosion-ree guiding elementsSPS - control unit


fexible synchronizing and saety

device


use o bio-oil, non hazardous to

water

two on-foor swivel arm bridges with

double telescopic arms and height ad-

justable liting pads as well as integra-

ted automatic arm locking system

Components


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de

Noliabilityacceptedorspecifcationsthataresubjecttoalteration-validity07/2011.T



rightodierencesbetweenthegoodsdeliveredandthedateandpicturesgivenhere(i.e.technicaldata,equipment,materialandopticalappearance)soarasthedierencesarereasonableorthecustomerandapossible

re


7/28/2019 AUTOP 2013

23/62

Le complmentpour votre atelier!

Le pont bras Masterlit 2.35 Saa 230 a t conu pour des voitures particulires,

des tous-terrains et des camionettes.

Les bras double-tlescopiques et la distance entre pistons de 2285 mm assurent

un accs acile et un levage proessionnel.

Le verrouillage automatique des bras est un systme erm qui protge contreendommagement.

Le grand choix de dirents patins dappui assure un levage en tout scurit.

autop Masterlift 2.35 Saa 230



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

24/62


Service:Nos technico-commerciaux vous assistentpour la planication et ralisation pour les con-structions neuves et des modernisations.Contactez-nous!

Masterlift 2.35Saa 230

Composants:

Donnes techniques










Branchement: 230/400 V

50 Hz16 A


Guides non-corrosis

Contrle lectronique



fexible



Option:Grand choix de patins dappui

Couleur standard:


ou au choix

RAL 5019 ( bleu )


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de

d

ition12/2011-Sousreservedemodifcations!

7/28/2019 AUTOP 2013

25/62

Le complmentpour votre atelier!

Le pont bras Masterlit 2.30 Sa 230 Sport avec sa distance entre pistons de

2285 mm trouve son application surtout dans le levage de voitures basses.

Les patins dappui avec une hauteur minimum de 70 mm sont paraits pour un

levage proessionnel mme pour des voitures sportives.

Un grand choix de dierents patins dappui permet une utilisation pour unegrande gamme de voitures particulires.

autop Masterlift 2.30 Sa 230



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

26/62



Masterlift 2.30Sa 230

Composants:

Donnes techniques









Branchement: 230/400 V /50Hz /16A


Guides non-corrosis

Contrle lectronique



fexible



Jeu de bras pivotants tlescopiques

avec hauteur min. rduite ( 70 mm )

Option:


Couleur standard:


ou au choix

RAL 5019 ( bleu )


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de


7/28/2019 AUTOP 2013

27/62

For difcultinstallations!

Die autop Masterlit with electronic synchronisation is especially suitable or di-

cult installation situations such as installation in 400 mm drilled holes or plas-

tic tubes. The liting units are communicating electronically without mechanical

cylinder connection. Due to the exibility o the liting units individual pistondistances can be realized. No mechanical cylinder connection combined with a

sel-carrying cylinder construction means that various installations are possible:

ceiling installation

tube installation

pit installation

autop Masterlit 4.35 Synchro



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

28/62



Technical data:

Capacity: 3,500 kg

Piston distance: exible mm

recommended 1,335/2,285




Voltage: 230/400 V

50 Hz

16 A

Power unit: 3.0 kW

Sel-supporting construction ( no support rom the bot-

tom necessary ) Suitable or drilled holes 400 mm.

Masterlit 4.35Synchro

OPTIONAL:

12071 at installation rame h=45 mm

12070 Pump unit attachment or ceiling

installation ML-Synchro (instal

lation o the pump unit at the

ceiling o the basement)12069 Pump unit-and control unit

column ( i installation on

the wall is not possible )

two pairs o inversed hydraulic cylin-

derscylinder running on teon rings

separated hydraulic circuits and

mechanical connection o the cylin-

ders o one side as saety device

together with the SPS-control unit

steel bearings in a sturdy welded

construction, galvanized and painted

push button control unit with syn-

chronization control, control o the

electronic limit switch and alarm

signal

distance between the cylinders

and the control unit up to max. 15 m

possible

with position sensor out o casted

electronic components and stainless

steel as electronical synchronization

device.

pump unit with sub-oil motor

can be combined with superstructu-

res autop Pv Premium- and swivel

arm superstructures with up to 3.5 t.

Components


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de





re


7/28/2019 AUTOP 2013

29/62

The prowants autop!

The model autop Masterlit Check-in has been improved and optimized. The

result is a new Check-in with still more unctionality or the reception area.

Also the design elements were taken into consideration.

The handy, pyramidal rubber pads assure a correct liting at the recommendedliting points.

Xy-heads increase the liting area considerably.

The hydraulic unit consists in proven components. The sychronizing/saety de-

vice is the most reliable on the market. The construction is simple and nearly

without any wear due to the well proven components.

autop Masterlift 2.35Combi Check-in



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

30/62



Technical data:

Capacity: 3,500 kg

Stroke length platorms: 1,835 mm

Length platorms: 4,400 mm

Height platorms: 95 mm

Stroke length wheel-ree: 1,835 mm

Height wheel-ree: 65 mm



Liting/lowering time: appr. 30 Sek


Voltage: 230/400 V50 Hz

16 A

Power unit: 3.0 kW

Masterlift 2.35Combi Check-in

Standard colour:

RAL 7016 (grey anthracite)

aluminium plated

two separate hydraulic units

hard-chromed cylinderscorrosion-ree guiding elements

SPS - control unit



device

illumination as standard equipment

installation in a waterproo cassette

use o bio-oil , non hazardous to

water

Installation possibilities:

- on-foor

- recessed in the foor

Components


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de





re


7/28/2019 AUTOP 2013

31/62

Flexibility isthe key!

The Combi is a genuine all-purpose lit. A high quality and ecient diagnostic in

the check-in area is given due to the combination o platorm lit and wheel-ree

device Pv or Saav.

During repair works the platorms remain on-oor and the wheel-ree devicesallow nearly any kind or service work to be done.

Three installation versions are possible:

on-oor

recessed in the oor

recessed in the oor with ush-oor device

autop Masterlift 2.35 CombiPv or Saav



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

32/62



Masterlift 2.35Combi Pv/Saav

Standard colour:


on request

RAL 5019 ( blue )

two seperate hydraulic units



exible synchronizing and saety

device



water

platorms with anti-sliding surace

Wheel-ree device available:

Pv-superstructure ( standard or

with xy-unction )

Saav-superstructure

Components

Technical data

Capacity: 3.500 kg

Piston distance: 1,335/1,705 mm

PlatformStroke length: 1,905 mm


Wheel-free device Pv/Saav



Power unit: 3.0 kW

Voltage: 230/400 V

50 Hz

16 A


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de





re


7/28/2019 AUTOP 2013

33/62

Proessionaltechnology!

The technical advance o the Prolit consists in the pneumatic, electric and hy-

draulic supply inside o the cylinder and not in cable conduit tubes. The cylinder

dimensions o 140 x 9.5 mm increase the stability.

The platorm lits F 460 (without wheel-ree) and Fn 460 (with wheel-ree) con-sist in 2 on-oor sturdy welded platorms with special shaped proles, sand-

blasted, primed and painted; appropriate drive-on aps are available in dife-

rent lengths. Equipped with platorm supports and cross-bar the lit responds

perectly to the tolerances or wheel alignment.

The platorms can also be installed recessed in the oor with or without ush-

oor device.

autop Proflit 2.40 F and Fn 460



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

34/62



Proflit 2.40F/Fn 460

Standard colour:


on request

RAL 5019 ( blue )




exible synchronizing and saety

device



water


Possible installations:

on-oor

recessed in the oor

recessed in the oor with ush-

oor device

Optional:

illumination

accessories or wheel alignment

Components

Technical data

Capacity: 4.000 kgPiston distance: 1,315 mm



Cylinder diameter: 2 x 140 mm

Liting/lowering time: appr.. 30 sec.

Pump unit: 3.0 kW


Voltage: 230/400 V

50 Hz

16 A

Platorm:

Length: 4,600 mmWidth: 605 mm

Wheel-base, max.: 4,000 mm

Drive-over height: 150 mm

Wheel-ree (Fn460) Jacking beam (F460)

Capacity: 3.500 kg Capacity: 2,000 kg

Stroke length: 370 mm Stroke length: 250 mm

Length: 1400-2100 mm 3-ponts lting

Liting/lowering : appr. 8 sec. middle/ 660 / 1,340 mm

Drive-over height:25 mm



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de





re


7/28/2019 AUTOP 2013

35/62

Proessionaltechnology!

Hydraulic twin-ram inground lit with platorms, wheel-ree device and integra-

ted play detector or check-in, repair and maintenance as well as MOT, testing

and reception.

Assessories: hydraulic play detector, integrated in the platorm on both sides

two turning plates working in counter rotation

control o the turning plate via test lamp

or a ast diagnostic o play in the wheel assembly

testing can be done even with a loaded vehicle by using the hydraulicly

controlled turning plates.

deposit or test lamp integrated in the platorm

autop Proflit 2.40 Fn 460GST 2500



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

36/62



Proflit 2.40 Fn460 - GST 2500

Standard colour:


on request

RAL 5019 ( blue )





device



water

two on-foor platorms; appropriate

drive-on faps are available


integrated scissor lit eective as

wheel-ree device

integrated play detector

Components

Technical data

Capacity: 4,000 kg




Cylinder diameter: 2 x 140 mm


Pump unit: 3.0 kW


Voltage: 230/400 V

50 Hz

16 A

Platorm

Length: 4,600 mm

Width: 605 mmWheel-base, max.: 4,000 mm


Wheel-ree device: GST:

Capacity: 3.500 kg Max. axle load: 2500 kg

Stroke length: 370 mm Drive-over height:150 mm

Length: 1400-2100 mm

Liting/lowering: ca. 8 Sek.

Drive-over height: 25 mmautop Maschinenbau GmbH

Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de





re


7/28/2019 AUTOP 2013

37/62

Safety,leading to the

top!

The Cargolit with platorms has been developed or an ease liting o utility

vehicles with dierent chassis and wheel bases.

Possible accessories are:

illumination or the underbody platorms installed on-foor or recessed in the foor

wheel alignment

axle liting, also or long wheel bases

autop Cargolift 2.50 F 480



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

38/62



Cargolift 2.50F 480

Standard colour:


on request

RAL 5019 ( blue )





device



water

two on-foor platorms, drive-on faps

are available


Optional:

jacking-beam

illumination

wheel alignment package

Components

Technical data

Capacity: 5,000 kg






Pump unit: 3.0 kW


Anschlusswerte: 230/400 V

50 Hz

16 APlatform

Length: 4,800 mm

Width: 630 mm

Wheel-base, max.: 4,200 mm


Jacking beam

Capacity: 2,600 kg

Liting height: 210 mm

3-points liting: middle/690-1500 mm

Function: air-hydraulic


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de





re


7/28/2019 AUTOP 2013

39/62

A realallrounder!

The swivel arm lit autop Cargolit 2.50 Saa 230 is appropriate or all commercial

vehicles up to little trucks i all-around ree access is demanded especially or

body repair works. This lit can also be used or any private cars and 4-wheels

drives i complementary capacities are needed.

The piston distance o 2,150 mm allows an easy access, the cars can be driven in

between the cylinders.

The solid construction with a cylinder diameter o 213 mm guarantees an out-

standing stability also in case o unavourable load distribution

A wide range o liting pads allows a sae liting o the dierent vehicles.

autop Cargolift 2.50 Saa 230



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

40/62



Technical data:

Capacity: 5,000 kg





Liting height, dep. on liting pads



Voltage: 230/400 V

50 Hz


Cargolift 2.50Saa 230

Standard colour:


on request

RAL 5019 ( blue )





device



water

two on-foor swivel arm bridges, easy

to adjust:

double telescopic swivel arms

height adjustable liting pads

integrated automatic arm locking

system

Components


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de

Noliabilityacceptedorspecifcationsthataresubjecttoalteration-validity11/2012

.Thedateandpicturesinthisproductinormationarenotbindingandareonlygivinganapproximatedescription.


rightodierencesbetweenthegoodsdeliveredandthedateandpicturesgivenhere(i

.e.technicaldata,

equipment,materialandopticalappearance)soarasthedierencesarereasonableorthecustomerandapossible

re

ductioninvalueothegoodsdeliveredisnotconsiderable

.

7/28/2019 AUTOP 2013

41/62

A realallrounder!

The swivel arm lit autop Cargolit 2.50 Jumbo is suitable or any kind o repair

and maintenance at light goods vehicles or little lorries i ree access is required.

The solid construction with a piston diameter o 213 mm guarantees an out-

standing stability also in case o unavourable load distributionO course this lit can also be used or private cars or o-roaders to compensate

ree capacities within your workshop.

A wide range o liting pads allows a sae liting o the dierent vehicles.

autop Cargolift 2.50 Saav 145



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

42/62



Technical data:

Capacity: 5,000 kg





Liting height, dep. on liting pads



Voltage: 230/400 V

50 Hz


Cargolift 2.50Saav 145

Standard colour:


on request

RAL 5019 ( blue )





device



water

two on-foor swivel arm bridges, easy

to adjust:

sliding part on a traverse

double telescopic swivel arms

height adjustable liting pads

integrated automatic arm locking

system

Components


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de

Noliabilityacceptedorspecifcationsthataresubjecttoalteration-validity11/2012

.Thedateandpicturesinthisproductinormationarenotbindingandareonlygivinganapproximatedescription.


rightodierencesbetweenthegoodsdeliveredandthedateandpicturesgivenhere(i

.e.technicaldata,

equipment,materialandopticalappearance)soarasthedierencesarereasonableorthecustomerandapossible

re

ductioninvalueothegoodsdeliveredisnotconsiderable

.

7/28/2019 AUTOP 2013

43/62

Une forceextraordinaire!

Le pont Biglit 2.65 Saaa 145 est un pont trs universel pour le levage dutilitaires

et de petits camions. Les vrins dun diamtre de 213 mm assurent un levage en

toute scurit avec des charges jusqu 6,5 t, mme en cas de repartition de la

charge davorable.

Une hauteur de passage rduite permet galement lutilisation pour desvoitures particulires et des 4 x 4.

La exibilit des bras triple-tlscopiques assure un maximum daccs autour

du vhicule pour toutes opration de rparation et de maintenance.

autop Biglift 2.65 Saaa 145



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

44/62


Et en plus.........Nos technico-commerciaux se mettent votredisposition pour toutes demandes de planifca-tion et modernisations.Veuillez nous contacter !

Biglift 2.65Saaa 145

Composants:

Donnes techniques:


Espacement des cylindres: 1.350 mm


Hauteur de levage: 1.960-2.285 mm




Branchement: 400 V / 50 Hz /16 A


2 vrins inverss (diamtre 213 mm) en

acier alli avec surace chrome dure





Barre exible de synchronisation et de

scurit


Livraison avec de lhuile cologiqueJeu de deux bras, aciles ajuster par :

Bras triple-tlscopiques

Patins dappui ajustables en hau-

teur

Verouillage des bras automatique

Couleur standard:

RAL 7016 (gris anthracite)

Au choix

RAL 5019 (bleu)


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de

Sou


7/28/2019 AUTOP 2013

45/62


Le pont Biglit 4.60 F 550 a t conu pour le levage rapide et simple des uti-

litaires avec des empattements trs dirents. Avec la capacit de levage de

6t et une longueur des chemins de roulement de 5,5 m mme des vhicules

utilitaires de la nouvelle gnration peuvent tre levs sans aucun problme.

Une hydraulique avec deux double-vrins inverss et cylindre et piston chroms

durs sont la base du pont. Les avantages sont :

Excution trs stable par doubles-vrins

Levage en scurit mme en cas de repartition de la charge davorable

Installation du pont cot reduit

Peut tre install dans des cassettes Cargolit existantes

Cylindres chroms durs (mini. 30 microns)

Besoin dun espace rduit

autop Biglift 4.60 F 550

...une entreprise du groupe STENHJ


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

46/62

...une entreprise du groupe STENHJ

Et en plus.........Nos technico-commerciaux se mettent votredisposition pour toutes demandes de planica-tion et modernisations.Veuillez nous contacter !

Biglift 4.60 F550

Composants:

Donnes techniques:


Espacement des cylindres: 1.485/145 mm






Branchement: 400 V / 50 Hz /16 A


Chemins de roulement :Longueur : 5.500 mm

Largeur : 630 mm

Empattement maxi : 4.900 mm

Hauteur de monte : 215 mm

2 doubles-vrins inverss en acier alli

avec surace chrome dure





Barre fexible de synchronisation et de

scurit


Livraison avec de lhuile cologiqueChemins de roulement avec surace

antidrapante

Couleur standard:

RAL 7016 (gris anthracite)

Au choix:

RAL 5019 (bleu)


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de

Sou


7/28/2019 AUTOP 2013

47/62


Le pont jumeaux Biglit 2.65 Saaa 230 a t conu pour la nouvelle gnrati-

on de vhicules utilitaires avec empattement trs long. Les bras triple-tlesco-

piques permettent lutilisation du pont pour le levage dune petite voiture de

ville, de toutes les voitures particulires, des tous-terrains ainsi que des grosses

camionettes.

La distance des pistons de 2.150 mm garanti un accs acile.

Le diamtre des cylindres de 213 mm donne une stabilit exemplaire surtout

pour le levage de grosses vhicules utilitaires.

autop Biglift 2.65 Saaa 230



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

48/62



Biglift 2.65Saaa 230

Composants:

Donnes techniques






Diamtre des cylindres 2 x 213 mm




Branchement: 230/400 V /50 Hz /16 A

Deux cylindres inverss 213 mm

Guides non-corrosis

Contrle lectronique


Dispositi de synchronisation/scurit

fexible



Bras pivotants triple-tlescopiques

Option:


Couleur standard:


ou au choix

RAL 5019 ( bleu )


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de


7/28/2019 AUTOP 2013

49/62

The key toyour success!

The autop Triolit is a proven team workstation or simultaneous work on three

levels: underbody o the vehicle, wheels and brakes, motor.

Fast service and repair as well as high rentability and space saving installtion

make this product outstanding.

The autop Triolit is known as

team workstation or quick-service

wheel alignment station or exact wheel alignment

autop Triolift 3.35 Fn 420



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

50/62



Triolift 3.35Fn 420

Standard colour:


on request

RAL 5019 ( blue )

two hydraulic cylinders made o mic-

ro-alloyed high grade steelwith hard-chrome plated pistons

security device by rigid bearing at the

working platorm

push button control or liting/lowe-

ring o platorms and wheel-ree de-

vice

working platorm with control column

and tool deposit

two on-oor platorms o sturdy wel-

ded design with special shaped prof-

les, sand-blasted, primed and painted;

with corresponding drive-on aps


integrated hydraulic scissor lit with

low drive-over height or simultaneous

wheel-ree liting on all our wheels

Components

Technical data

Capacity: 3,500 kg

Platforms

Stroke length: 650 mm

Liting/lowerng time: appr. 5 sec.

Length: 4,200 mm

Width: 570 mm

Between platorms: 905 +/- 70 mm

Drive-on angle: 5

Wheel-free device

Stroke length: 370 mm

Liting/lowering time: ca. 8 Sek.

Length: 1,400-2,100 mm

Working platform

Depth: 1,060 mm

Pit

Length: 4,980 mm

Width: 990 mm

Depth: 900-950 mm


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de





re


7/28/2019 AUTOP 2013

51/62

Une technolgiepassionnante!

Le double pont jumeaux ore une prcision exemplaire pour la gomtrie. Il est

quip avec des reserves lavant et larrire qui permettent lutilisation de

toutes les appareillages de gomtrie modernes, soit avec 4 plaques tournan-

tes, soit avec 2 plaques tournantes et 2 plaques pivotantes larrire.

Avec loption cric dessieu vous pouvez lever tous les vhicules, mme avec des

dessous de caisses compliqus.

autop Quattrolift 4.50 F 480 / 550Gomtrie



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

52/62


Service:Nos technico-commerciaux vous assitentpour la planication et ralisation pour cons-tructions neuves et de modernisations.Contactez-nous!

Donnes techniques

Capacit de levage: 5,000 kg

Distance des pistons: 1,685/4,000 mm

Diamtre des cylindres: 4 x 140 mmMonte/Descente: env. 45 sec

Course des vrins: 1,960 mm

Hauteur utilisable: 2,155 mm

Proondeur ondation: 2,625 mm

Branchement: 230/400 V/50Hz /16A

Groupe moto-pompe: 3.0 kW

Chemins des roulement:

Longeur (F480): 4,800 mm

Longeur (F550): 5,500 mm

Largeur: 650 mm

Empattement maxi: 4,850 mmHauteur de monte: 195 mm

Levage auxiliare mobile:

Capacit de levage: 2,600 kg

Hauteur de levage: 300 mm

Monte

( avec air 1000/2000kg): env. 27/52 sec

Pression (min/max) 5.5/8.0 bar

Quattrolift 4.50F 480/550

Couleur standard


ou au choix

RAL 5019 ( bleu )

2 units de levage spares avec 4

cylindres inversesCylindres chroms-durs

Guides non-corrosis

Contrle lectronique avec achage

digital et descente durgence pneu-

matique

Dispositis des synchronisation/scuri-

t fexible

Synchronisation lectronique des

deux units de levage avec program-

mation des dierentes hauteurs.

Installation dans des cassettes tan-

ches

Installation du groupe moto-pompe

et de la distribution hydraulique dans

une cassette spare


Chemins de roulement avec surace

anti-glissante

Composants:


Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25


www.autop.de


7/28/2019 AUTOP 2013

53/62

No. Item Designation1 11007 Insert pads U 102 11014 Insert pads Ro

jacking beam3 11029 Insert pads 12

4 11031 Pv pads 120 / 5 11000 Rubber blocs 806 11001 Rubber blocs 607 11004 Rubber blocs 108 S1014-50 Adapter Monde9 11005 Rubber plate 20

No. Item Designation1 11027 Insert pad 2 11029 Insert pad 3 11030 Insert pad 4 11014 Insert pad

jacking bea5 11013 Insert pad s6 11006 Insert pad U7 11021 Insert pad U

11007 Insert pad U11009 Insert pad U37940 Support for 11028 Insert pad 11100 Wall mounte

(delivery wit

Accessories for autop lifts

1

2

3

4

75

6

8

9

7/28/2019 AUTOP 2013

54/62

Nr. Item Designation11025 Traverse, fo

1 set = 2 pie

Attention: Lifting pads to be orde

Nr. Item Designation20930 Jacking bea

for autop pl


7/28/2019 AUTOP 2013

55/62

Nr. Item Designation12233 Jacking bea

for autop pl

Nr. Item Designation12221 Platform su

Fn 420, F480H 1 = 160H 2 = 600 H 3 = 1600

12222 Platform su420, Fn 420,H 1 = 160H 2 = 1600


7/28/2019 AUTOP 2013

56/62

Nr. Item Designation1 12275 Cassette 132 12276 Cassette 233 12226 Cassette Co

4 12192 Cassette 14

Nr. Item Designation1 12007 Cassette for

With integra2 12006 Cassette for

Ceiling insta3 12005 Stahlwanne

With wall-m

Nr. Item Designation1 S0728 Cassette KA

Self-carryin2 S0729 Cassette KA

Self-carryin

3 S0750 Cassette KASelf-carryin

4 S0526 Plastic coat1350 / 1450

5 S0527 Plastic coat1705 / 2300


7/28/2019 AUTOP 2013

57/62

Nr. Item Designation1 11060 XY-heads2 11062 XY-heads fo

Nr. Item Designation1 12239 Cross-bar 2 12240 Cross bar

Querstrebe


7/28/2019 AUTOP 2013

58/62

Nr. Item Designation1 12181 Foundation

for tube ins2 12183 Foundation

for tube ins3 12197 Foundation

for tube ins

Nr. Item Designation1 12162 Flat foundat2 12163 Flat foundat3 12179 Flat foundat4 12238 Flat foundat


7/28/2019 AUTOP 2013

59/62

3

3

4

4

5

5

6

6

A

B

C

D

Schutzv

der N

NameZust. nderung

DIN IS

Freigabe

Ersteller

m

EDV Datum

X

Radgreiferaufnahme

Detailansicht vomAufnahmedorn

Radgreiferaufnahme "OEntwickelt fr die SUV- zur Aufnahme von Fahrz

7/28/2019 AUTOP 2013

60/62
http://www.autop.de/mailto:[email protected]

7/28/2019 AUTOP 2013

61/62

Cleanerthan ever!

The Jet-Cleaners oers:

easy handling

automatic operation the possibility o programming or working days, week-ends and holidays

cleaning on the basis o water

longer lietime o washing liquid, i equipped with an oil skimmer

minimum operation costs due to economy isolation

autop Jet CleanerRC 82 and RC 122



Sandkampstr. 90

D-48432 Rheine

Tel. ++49(0)5971/8602-02

Fax ++49(0)5971/8602-25


www.autop.de

7/28/2019 AUTOP 2013

62/62

Jet CleanerRC 82 / 122

Standard colour:

RAL 7016 ( grey anthracite ) - housing-

RAL 1004 ( yellow ) - cover

Standard:

made o stainless steellow-water alarm

suction flter made o stainless steel

bath cover

movable

Optional:

programmable operation time

oil skimmer

economy insulation

special colour

detergents, baskets, etc.

Components

Technical data RC 82 RC122

Useul basket : 790 mm 1,190 mm

Useul height: 500 mm 500 mm

Loading height: 930 mm 830 mm

Max. basket load: 300 kg 500 kg

Liquid volume: 150 l 370 l

Pump ration: 200 l/min 280 l/min

Projection pressure: 3 bar 5 bar

Voltage: 230/400 V/50 Hz 230/400 V/50 Hz

14 A 24 A

Pump motor rating: 1,5 kw 4 kW

Heater rating: 6 kw 9+6 kW

Basket drive: jet o water E-motor 0,09 kW

Total height: appr. 1200 mm appr. 1250 mm

Total width: appr. 1300 mm appr. 1650 mm

Total depth: appr. 1300 mm appr. 1650 mm

Total weight: appr. 220 kg appr. 400 kgth

ataresubjecttoalteration-validity07/2011.T

hedateandpicturesinthisproductinormationarenotbindingandareonlygivinganapprox

imatedescription.Moreoverwereservethe

sdeliveredandthedateandpicturesgivenhere(i.e.technicaldata,equipment,materialandopticalappearance)soarasthedierencesarere

asonableorthecustomerandapossible

redisnotconsiderable.

Documents

AUTOP 2013