Available components.Due to the difficulty that some of you are having in locating the different materials used and making some of the engine components, we have added a list detailing all of the original parts that we currently offer. All of these have been tried and tested by Mr. Kurt Schreckling and are those which he currently uses for the construction of his engines.

Without a doubt, the star component of this list is the Inconel 713LC ARTES turbine disk, which can be used for the Kamps and the KJ-66 based engines. This turbine disk can allow rotor speeds up to 130.000 rpm at 700ºC due to the toughness of this material.The wheels are cast in a high vacuum (0.001bar) environment in a certified factory who currently cast parts for Rolls Royce, Airbus, Eurofighter and other civil and military customers. The finished parts are based on the original drawings, but we have applied the last updates in the design and in the materials, so you can find some diferences with the plans. All of the parts are fully compatible with the original design. Inconelis a registered trademark of Inco Alloys

KJ66 complete kit Available Kamps components

Nº Order code Detail number

Remarks

2 ARTÉS KJ-66/R 1.8 Turbine disk ready to use3 ARTÉS KJ-66/BL 1.8 Turbine blank. Must be drilled, turned, and balanced

Available KJ-66 components

Nº Order code Detail number

Remarks

KJ66 complete kit

Includes all of the items necessary to build the engine at V99, ceramic bearings, Festo fittings, 3.6V pump, Fadec controller and data terminal. The engine is ready for fuel lubrication.

1 Set of complete working drawings and instructions for the KJ-66.

0 25 pages DIN A4, with detailed dimensions and building instructions.

2 ARTÉS KJ-66/R 1.8 Turbine disk drilled.3 ARTÉS KJ-66/BL 1.8 Turbine blank. Must be drilled, turned and balanced.

4 SHAFTSET 1.1,1.3,1.5,1.7,1.9,2.2,2.3

Fully completed shaft, ring, and spring sleeve.

5 SHAFTUN 2.1 Shaft tunnel, ready to use.6 COMPDIF 4 Compressor diffuser, CNC manufactured ready to

use.

7 FRONTSET 3.1,3.3 Intake nozzle and cover. One piece Alu. CNC machined from solid with "O" ring.

8 EGV 10.1,10.2, 10.3,10.4

Cast exhaust guide vane system ready to use.

9 COMBUSET/R 5.1,5.2,5.3, 5.4,5.5,5.6, 5.7,5.9

Combustion chamber ready to use.

10 TUBSET/STICKSET 5.4, 7.1 Inconel tubes for sticks and stainless steel injection tubes.

11 NOZZLE 13.1,13.2, 13.3 Exhaust nozzle. Ready to use12 2670GA2019 1.2 KKK Compressor

To order send a fax or call to H. Artés de Arcos Raventós at 34-937950719. Normal delivery time for parts in stock is two weeks.

Price list

Item Nº2. Turbine disk in high vacuum cast Inconel 713LC drilled. Certificate

Item Nº3 Blank turbine disk in high vacuum cast Inconel 713LC.

Item Nº4 Fully completed shaft, ring, and spring sleeve. Item Nº5 Shaft tunnel, ready to use.

Item Nº6 Compressor diffuser, CNC manufactured ready to use

Items 2,4,5,6,12 assembled.

Item Nº7. Intake nozzle and cover.One piece Alu. CNC machined from solid with "O" ring.

Item Nº 8 Cast exhaust guide vane system ready to use. Moulds

Item Nº9 Combustion chamber ready to use. Injection tubes on request.

Item n.10. Inconel stick tubes and stainless steel injection tubes

Item n11. Exhaust cone machined from solid ready to use.

Item n12. KKK compressor.

KJ66 '97 engine

KJ66 '99 engine

First page | KJ-66 first page | Engines |Get in touch with us