Bachelors English Version2 Copy

8/2/2019 Bachelors English Version2 Copy

1/33

I

() 6.050903 (6.092401)

i

.

5 15. 02. 2012.

Kharkiv 2012


2/33

Guidance on performance of Bachelors diploma work degree for students ofspecialty 6.050903(6.092401) Telecommunication systems and networkswith teaching in English

/ Authors Epishkin S.A. Lyulicheva I.A. Kharkiv: KHURE, 2012. 30 pp.


3/33

CONTENT

INTRODUCTION

1 PURPOSE AND OBJECTIVES OF BACHELOR THESIS DESIGN

2 THEMESOFDIPLOMAPROJECTS

3 Organization of graduate design

4 TECHNICAL TASK FORM FOR BACHELOR THESIS DESIGN

5 5 THE STRUCTURE, CONTENT AND VOLUME OF DIPLOMA WORK

6 DESIGN OF DIPLOMA WORK MATERIALS

7 PROCEDURE FOR SUBMISSION OF BACHELOR WORK AND ITSDEFENSE

8 RESPONSE OF CONTENTS SUPERVISOR ON DEGREE WOK

9 Requirements for Review of the degree project

LIST OF REFERENSIES

Appendix AAppendix BAppendix CAppendix DAppendix EAppendix M


4/33

INTRODUCTION

Bachelor's work is an important part of the overall training in the direction of"Telecommunications."

Implementation of Bachelors work is the final and most important step inpreparing students to the independent work at which they are training to apply theirknowledge in solving urgent scientific and technical problems.

Standard form of Ukrainian state certification on Bachelor in"Telecommunication", specialty 6.050903(6.092401) - "Telecommunication

systems and networks", is to protect graduate project (work) before StateExamination Commission.

During graduate design and defend of the Bachelor work the student must showhis level of knowledge both general and special disciplines, to reveal the ability touse scientific and technical literature, standards and special regulations, technicaland teaching materials on various aspects of telecommunications technologies,systems and networks.

Bachelor graduate work provides analysis and theoretical development (designand research technologies, processes, facilities and services) of current issues andproblems of "Telecommunication".

This methodological development guidance provides the structure and content, performance, design requirements, instructions, as well as requirements fordesign and defending the degree project thesis.

These guidance of TCS Department is based on the standards of Professional-

Teaching Program for "Telecommunications" with a specialty 6.050903(6.092401) "Telecommunication systems and networks", guidance documents ofthe Ministry of Education and Science of Ukraine, industry standards andregulatory and technical documentation and at the General guidance on thestructure, content and design rules for the graduate design - teaching literaturein KNURE in Ukrainian language.


5/33

1 PURPOSE AND OBJECTIVES OF BACHELOR THESIS DESIGN

Bachelor graduate work must be the culmination of general training in the fieldof telecommunications systems and networks.

The purpose of graduate design of telecommunication systems and networks are:- filing, organizing, and deepening of theoretical knowledge and practicalskills acquired during training;- further development and consolidation settlement, experimental and researchskills;

- demonstrate the ability to use knowledge to research and dissolve the urgentscientific and engineering problems;- knowledge of research methods, calculations, experiments and mathematicalsystems modulate while solving actual problems;- mastery of the basic methods of finding, use and analysis of research andscientific and technical information, including patent and the Internet;- skills to develop design specifications and technical documentation as required bystate and industry standards;

- developing skills of independent work on scientific and technical sources.

During the implementation and defense of Bachelors degree work professionaland educational level of students, their ability to perform tasks for engineering

positions in the telecommunication industry and business structures, design,educational and scientific organizations, as well as the ability to continuelearning in order to obtain Masters degree are identified.Student must carry out the Bachelors work by himself. Student the author of

baccalaureate work is responsible for all adopted solutions and the accuracy of alldata in his work.


6/33

2 THEMESOFDIPLOMAPROJECTS (PAPERS)

Themes of graduate work must comply with Ukrainian state standards, as wellas the syllabus for the Bachelor degree 6.050903 (6.092401) "Telecommunicationsystems and networks."

During the solution of urgent problems setted in baccalaureate work, wide provision of using of modern technologies and convergence of elements inthe local levels, local, regional, national and global information infrastructuresand communication services (LAN, MAN, WAN, RJJ, NJJ , GJJ) should be made .Themes of undergraduate work should be relevant and related to the real problems

that are developed or settled in the branches of the department and the businessoperators, businesses and other organizations or scientific directions of thedepartment.

The task of designing should be formulated so that the complexity of its executionwas at least 30-50 percent of labor at diploma in educational qualification level of"specialist".

The content and nature of the degree projects (work) may be:

- Research;- System based;- Circuit (design, calculation and design);- Software (algorithmic)- Refereenig character.Qualification work of the research nature are focused on theoretical andexperimental investigation of new problems in telecommunications and relatedmaterials, research or physical processes, processing algorithms and software for

creating or improving the parameters of sustainability, survivability, reliability,efficiency, quality of items and services, and methods of operation.

Research work may be performed by students on the basis of scientific research orresearch plan of TCS Department.

System based qualification workconcentrated on the elements and fragments oftelecommunications, cooperation and convergence of existing elements of the nextgeneration of telecommunications services, adaptation, technical operation

(management, control, monitoring, testing, measurement) systems for various


7/33

purposes. During these tasks should be based on the use of principles of systemapproach:

- Taking into account all stages of the life cycle of systems, facilities, services,business models at the levels of access, transport management;

- Summarize the experience and evaluation of current similar systems;- Comprehensive review of open systems, facilities, networks andtechnology with the environment;- The use of modern achievements in the creation of element base andensure its compliance with the conditions of construction and operation of thesystem;- Developing ways of improving efficiency and quality to beimproved in accordance with the requirements of QoS standards and ISO;

- Use techniques of measurement technologies andmetrological support to TCS;- Using the principles of composition, decomposition and hierarchical;- Identify and solve key technical problems that preventaccelerate the development of telecommunication infrastructure and advancedtechnologies.The software version of Bachelors Qualification workshould include buildingmathematical models of processes or devices that are investigated, the selection

and description of the method, development of algorithms which solve this problem, a program of performance and calculations of parameters. It shouldclearly be define what kind the result must be obtained (mathematical model of the

process or device algorithms or methods of calculation, assessment of created orexisting systems, networks, etc.).

Refereeing qualification work can be the most widely in volume. This optionmay provide basic methods for evaluating the following factors:- Analysis of environmental impacts from construction and operationequipment of telecommunication systems and networks;- Convergence of technologies, components and services in the TCS;- Ensure quality of service provided in communication services;- The possibility of circuit devices and their models;- Electromagnetic compatibility in telecommunications;- Optimization of the element base;- The impact of external factors on the functioning of the CBC;- Description and comparative analysis of modern technologies in the TCS andothers.


8/33

3ORGANIZATION OF BACHELORS GRADUATE DESIGN

Organization of the Bachelors work is relying on teachers of the TCSDepartment with the appropriate working load. Not more then to weeks after the

beginning of eighth semester supervisor must familiarize student with the themeof undergraduate work, which recommended the development. The theme ofBachelors work can be formulated at the suggestion by the student as well according to the requirements for undergraduate works at his specialty.The process of qualification on Bachelors degree has such main stages:

- identification and qualification approval the theme of work;- formulation by the supervisor the Task and objectives to its implementation;

- development of the work according to the task and theschedule specified in the Form;- design of explanation notes (thesis) and preparation for defense;- obtaining of the response from supervisor of diploma (or from consultant);- reviewing the work by independent specialist;- defense the degree thesis before the State Examination Commission(SEC).

Supervisor of the graduate work:

- gives the task and objectives to work filling the Form;- helps students to develop a calendar schedule for the entireterm performance;- Recommends that the necessary basic scientific and technical literature, modernreference materials, model making, etc.;- Advises the student to work on during the whole perioddesign;- Verifies the performance (in parts or in whole) by timetable;

- Developing a response to the thesis project (work) degree;- Previous protection holds a Master degree in 3 - 5 days

protection;- Sign the explanatory memorandum, roll and graphics;- Signs response to the assessment of the student;

Supervisor, consultant and reviewer do not release the student from responsibilityfor the quality and authenticity of the task and making the right decisions, and

compliance standards and timelines schedule. One supervisor may have up to eightstudents-bachelors simultaneously.After receiving the task on designing diploma a student must:


9/33

- to take up work by the time that is given to independent work;- develop a schedule for the entire period of the design indicating the order ofindividual steps and submit it for approval by supervisor. Form for Task andObjectives to design the diploma is given in Appendix A.

Work on student graduation projects may be executed both in University andbusiness or other institutions where it can be place and relevant materials for thedesign.Supervisor performs the control of the materials submitted by the studentaccording to schedule.At meetings of the Departmentmanagers and consultants of

projects (works) regular reported about the implementation plan.

Students who do not perform schedule of the design or are significantly behind inhis performance, are invited to the report to the Department meeting. If studentshave not completed the project (work) to day before the date of defense, they aredispelled from the University.

4 TECHNICAL TASK FORM FOR BACHELOR THESIS DESIGN

Form of Task and Objectives is the basic document for the graduatedesign degree. It is must be written by the supervisor of diploma on the languageon a standard form (Appendix A), where there are indicated: name and patronymic

of the supervisor of diploma, bachelor's work topic output data, a list of majortasks to be developing.

The Technical Task Form also contains a list of graphic material, whichspecifies necessarily drawings, posters, their quantity, format and the calendarschedule of the project (work).

Technical Task Form must be signed by the supervisor of Bachelors work at thedate of issuance of task and by a student - indicating the date at which he take

the task to perform. Technical Task Form is approved by the head of department.Background tasks are well-defined task. They should indicate the source documenttasks, appointment systems, subsystems, tasks, complex, technical parameters andother characteristics required for baccalaureate work.

The text of the design task is not allowed to make any changes - scratched, crossedout words etc.

In the section "Summary of Explanatory Note" should list the main issues and

graphic visualization of materials that are required and whose presence in the workis supervised by the head.


10/33

5 THE STRUCTURE, CONTENT AND VOLUME OF DIPLOMA WORK

5.1 General instructions

Thesis for project (work) must consist of explanatory notes (text parts) andgraphical part. To the explanatory notes response from the ProjectSupervisor and review must be added. Explanatory notes and graphicmaterial part must be the result of independent processing of questionsformulated in Technical Task Form.

5.2Structure of explanatory notes for diploma project (work)

Summary Explanatory determined the design task and depends on the nature of thedegree project (work) that is developed. Thus the explanatory notes diploma

projects (works) made by different students is not allowed in a text match materialsfor general use.The recommended structure of the explanatory note of the degree project (work) isshown in Table. 5.1.These presentation materials are recommended, reflect a logical sequence ofdevelopment diploma (work).Explanatory note must contain:- Cover sheet;- Technical Task to Bachelors work;- Abstract (on 3 languages);

- Content;- A list of symbols, units, acronyms and terms;- Introduction;- Content (main part) of the explanatory note;- Life protection and life safety;- Conclusions;- A list of references;- INFORMATION Form of the Bachelors Work;- Appendixes: drawings, diagrams, specifications and other.


11/33

Table 5.1 - Structure of the explanatory note of the degree project (work)

Name of itemsNumberof pages

Title Form 1Technical Task to Bachelors work 2Abstract 3Content 1

A list of symbols, units, acronyms and terms;1

Introduction 12Main part 2232

Life protection and life safety 4Conclusions 1List of References 1Appendixes optional

5.3 The structure of the Bachelors degree work

General requirements to the text of the explanatory note - material must be

presented in the logical sequence, clarity and concreteness of presentation oftheoretical and practical results, essentially in setting goals and objectives of the project, research methods, decisions, conclusions and proven the validity ofrecommendations. The text of the explanatory note must follow the commonterminology. You must refer to sources of information from which you takematerials. In the text of explanatory note should be given analytical apparatus usedand results of calculations on PC.Explanatory text should not be taught in first person, preferably impersonal form

(such as "calculated", "find").For some structural elements of the explanatory note, and some sections(questions) within its content of, the basic requirements for them are.Requirements determined by the abstract ISO 3008-95 [5]. Summary - a summaryof the contents of the explanatory note, which includes basic information andfactual findings necessary for the initial review of the diploma project. It shouldcontain:- Information concerning the scope of the explanatory note, the number of

illustrations, tables, used sources and applications;


12/33

- The text that displays the object of research, the purpose of the diploma project,research methods, main results and their novelty, recommendations onimplementation;- A list of keywords describing the content of notes (5 to 15 key words or phraseswritten in string in capital letters, commas, in the nominative case).Volume of abstract must be 1200 - 2000 symblos. Abstract provided state and oneor two foreign languages.Content is placed directly after the abstract, beginning with a new page.Contents include: introduction, consistently listed the name of all sections,subsections, paragraphs and subparagraphs (if they have headers) effect (main part)diploma, conclusions, recommendations, references, names of applications and

page numbers, which contains the beginning of the material. The content may betransferred numbers and names of figures and tables indicating the pages on whichthey are located.All made in the thesis project (work) malorozpovsyudzheni Legend, symbols,units, abbreviations and terms are explained in the list of abbreviations, symbols,characters, items and terms that are placed directly after the content on a new page.

Not withstanding this, the first appearance of these elements in the text of thediploma project (work) suggest their transcription.Introduction - a reflection of the work, so thoroughly processed. The bestintroduction to formulate after the main text of work. Entry must contain asummary of the work:- Assess the current state of the problem, which is the subject of the degree project(work), while noting the almost solved the problem, the existing gaps ofknowledge in this subject area;- Actuality of its value for a given stage of development the industry;- Global trends in solving tasks;- Comparison with schonayblyzhchym prototype explanation, the design differsfrom existing;- Description of the source;- Purpose and scope of work, etc.;- Brief information about the content of the work.The main part includes the development and justification of major decisions on thetopic of the diploma work.

For the explanatory note of the research nature the content usually must

reflected the following questions:


13/33

- Review of the literature sources of research questions, identifying the theoreticalassumptions and possible directions of solving development, feasibility researchwork performed;- Development of basic theoretical principles and relationships;- Solving research on PC (drawing up and setting up programs to address, gettingresults and their analysis);- Development of experimental studies, the choice of equipment needed for theexperiment, the description of experimental plants;- Summarize and compare the results of theoretical and experimental studies;- General conclusions from the work by the application of research findings indesigning objects.The explanatory note of diploma work with system character includes:- Review and analysis of the current state of the problem in question, as well asexisting methods and ways to address these problems in the thesis project;- A meaningful description and analysis features of the object (process or system)that are considered in the work;- Justify the purpose of developing the problem (system, subsystem) and

performance criteria;- Formulation and formalization of tasks, selection and justification of methods ofsolution;- Development of information problem (system, subsystem) that is considered;- Development and study of algorithms for solving problems;- Selection, development and study of technical problems or system;- Assessment of the reliability of the components of the developed system;- Conclusions.For graduation projects works with circuit (design) character may berecommended shuch content explanatory note:- Analysis of issues and objectives, the formulation of technical requirements forfacility design and comparative analysis of similar data circuit solutions;- Selection and feasibility of structural or functional circuit device or system;- Calculation of the principal electrical circuit or circuit synthesis device or system;- Simulation and debugging device or parts thereof, the removal of theexperimental characteristics;


14/33

6 DESIGN OF DIPLOMA WORK MATERIALS

Thesis for bachelors work is designed in the order which is established

according to the standards of documents specified for the diploma design ofcomplex systems, as well as to other state industry standards [4-6].

6.1 Requirements for explanatory note

Explanatory note is issued in accordance with the requirements of DSTU3008-95. Documentation. Reports in the field of science and technology. Thestructure and rules of design.

Explanatory note must be printed (made in a text editor Microsoft Word fontTimes New Roman 14 pt) on sheets of A4 (210 x 297 mm). Line spacing is set to a1.3 (having 40 lines per page). When writing an explanatory note you should usethe following size of fields: top, left and bottom ones not less than 20 mm, rightfield not less than 10 mm.

Contents of Explanatory Note is divided into sections, subsections,paragraphs and subparagraphs. The section headings (ABSTRACT, Contents, Listof abbreviations, symbols, Symbols, units and terms; INTRODUCTION,

DISCUSSION, CONCLUSION, list of references, Appendix) must be written incapital letters with symmetrically text alignment.

Each section begins with a new page. Titles units are written with smallletters (except the first capital) of paragraph (space is 15 - 17 mm). Wordswrapping in the title is not allowed an end dot mush not be puted. If the titleconsists of two sentences, they divided by a point. The distance between theheading and the text must be equal to 15 mm and between section headings andunits - 10 mm. Underline titles are not required. Title unit can be placed at the end

of the page if it is followed on this page at least with two lines of text. Subtitles areoptional. If they are, they is not separated from the main text.

Numbering. Page notes, pictures, tables and formulas are numbered inArabic numerals. Most put their page in the upper right corner with no end point.

The title page include the total numbers of pages of explanatory noteswithout title page . Illustrations and tables are located on separate pages, include tothe total numbers of pages of explanatory notes.

Sections, subsections, paragraphs, subparagraphs numbered in Arabic

numerals. Sections of the explanatory note should have serial numbers within the


15/33

statement of fact and marked with Arabic numerals without a period, eg 1, 2, 3,etc. INTRODUCTION, CONCLUSIONS list of references is not numbered.

Sections and subsections should have serial numbers within each section.Most unit consists of a section number and serial number of the unit, separated bya period. After a number of units do not make a point, for example: 1.1, 1.2, etc.

Numbering. Illustrations, tables, formulas are numbered in Arabic numeralswithin the sections, except those contained in the appendix.

Division of words (giving space), if necessary, may be made withinparagraphs or subparagraphs but not in the titles.

Illustrations. Illustrations (drawings, pictures, graphs, charts, diagrams,photographs) are located in the explanatory note immediately following the text inwhich they are mentioned for the first time, or on the next page. All the artwork tomake a link in a memorandum. If the artwork is created by the author of theexplanatory note is necessary, giving them the text to comply with applicablecopyright laws.

Drawings, figures, graphs, diagrams, charts, contained in a text must complywith standards ESKD (ESAP).

Links. Links to sources in the text are as they mention in the explanatorynote, indicating the serial number of the selected brackets, for example, ... is givenin [3]. "

Content. Includes names of all sections (units, points) and applications ifthey are selected intervals header indicating the page numbers on which is placedtop of the material sections (units, points).

List of symbols, units and terms. If the explanation note adopted specificterminology and used shortcutting, new characters, symbols, etc., they must submita list of them in a separate list. The list is located column in which words (inalphabetical order) are reduced to the right - quality decoding.

List of feferences used. List must include a list of references used in the textof the explanatory note. They are arranged according to the references to them. Listis issued as part of a new page in accordance with ISO 3008-95.

Appendixes. Add drawn as a continuation of notes on these pages byarranging according to references in the text. Every application starts with a new

page in the middle is written the word " Appendix " followed by thematic title,written in capital letters. If the memorandum more than one application, they arenumbered consecutively in letters such as " Appendix A", "Appendix B", etc.


16/33

7 PROCEDURE FOR SUBMISSION OF BACHELOR WORK AND ITSDEFENSE

7.1 Submission of diploma (work) to defense

The completed work, the materials of which are signed by a student ininformation work (project), must be submitted to supervisor of diploma project(work) [4]. He verifies compliance with the accomplishment of the project(working) needs and requirements of the everyday, and gives a written review,which contains the characteristic of students work.

Designed thesis project (business), signed by the head, along with the

response is sent for review. After a review of the Department Head decides on theadmission of students to defend a diploma project (work), which makes an entry onthe title page of explanatory notes. The negative review is not a reason for rejectingthe defense of diploma project (work). Head of Department may not allow thestudent to defend a diploma project (work) in case the thesis project (work) done ata very low level, or not taken into account all requirements for diploma projects.

Recommended these dates work for Day:- Presentation of the project (work) on signature of the head - 7 days;

- Presentation of the project (work) for a review - 4 days;- Presentation of the project (work) on the signature chair - 3 days;- Submission of the signed Chair of the project (work) in the SEC -

for 1 day beforprotection.

Prior to defense in the SEC must be given the following documents:- Page from dean of the student curriculum and received ratings (provides by

the Department);

- Characteristics of the student for the term of training at the Universitysigned by Dean;

- For the company at which the Bachelors work were executed - a writtenpermission to outdoor printing materials used in the work.

Before SEC can be given other materials that characterize the scientific andpractical value of the executed diploma (work), namely:

- Printed articles on the project (work);- Documents describing the practical value of the development of the

student;- Documents that show the practical application of work;


17/33

- Layouts, designs and other products.

7.2 Defence of Bachelor degree project (work)

Defense of degree projects (work) must be done at a meeting of the SEC. Toapply the test of HOS research and theoretical study and practical training of

bachelors, the issue of assigning them to appropriate qualification and grantingbachelor's degree (with honors, no awards), development of proposals for furtherimprovement of bachelors in the Department. At the structure of SEC consists ofteachers of the faculty and staff of industry, the chairman is appointed rector ofKNURE.

Shedule of SEC agreed with her head and approved for submission by Deanprovost for academic and technical work necessary to the public no later than onemonth before the defense of graduation projects (works). In Day student submits tothe SEC an explanatory note, drawings and slides.

Defense of a diploma (work) usually must not exceed 30 minutes. Before thedefense security certificate is read then student curriculum, and other documents.To report about content diploma (work) of the student is no more than 10 minutes.

The language of defense - Ukrainian, Russian or English for the choiceofgraduate student (last-in consultation with members of the SEC).

Report of the student shall consist of three main parts, namely introduction,main part and conclusion.

In the introduction to determine the urgency of the project (work), give ageneral analysis of the problem and formulate the basic problem with the solutionof which was related performance.

The main part of the report must give a report on the content of the executeddevelopment (clearly distinguishing between known and done by the author),noting the novelty and show the effectiveness of adopted technical solutions togive a brief report on the results. The bulk of the report should be accompanied bylinks to graphics.

At the rest of the report the possible scope of the project, list of publicationand copyright certificates (if any) on the project (work), the results of RWS,information on implementation, general conclusions and recommendations should

briefly mentioned.Then student answer questions of SEC. Answers to questions of the SEC

should not go beyond problems under investigation in the Bachelors work.Then the review and response must be read. Student has the opportunity to

respond to comments of the reviewer.


18/33

SEC at a closed meeting shall make appropriate decisions about the mark forpresented and defended diploma.

Marks for Bachelors work are rated in terms "excellent", "good","satisfactory", "unsatisfactory." In determining of mark for the Bachelors work thelevel of scientific, practical and theoretical training of students work is taken intoaccount. Results protect graduation projects (works) announced after a meeting ofthe SEC and completing the session protocol at the same day.

A student who receives an unsatisfactory mark in defense of the diplomawork, dispelled from the university and he may receive an academic referenceabout 4 years studing.

If defend to Bachelors degree work is determined unsatisfactory and studentwant to finish his education with the bachelors level, the SEC decides whether astudent apply for a second defense of the same theme with the rework, or he mustwork out a new theme, a certain department.

8 RESPONSE OF CONTENTS SUPERVISOR ON DEGREE WOK

In response of Project Supervisor (of diploma work) should be reflected thefollowing questions:

- New development and the degree of complexity;

- The ability of the student work on scientific, technical and patent literature;

- Independence of the student demonstrated his initiative and ability to use modernmethods and means of research, computer technology, the use of student standardsand other regulations;

- The ratio of students to work, his ability to work systematically, its cleanliness,literacy;

- Inclination of the student to theoretical studies and generalizations or toexperimental studies, practical work etc.

At the end Project Supervisor (of diploma works) must conclude that students'ability to work independently in this field and the possibility of diploma (work) inthe SEC for protection. Supervisor gives qualitative but not quantitativeassessment of the student. Rewiv form is shown in Appendix L.


19/33

9 REQUIREMENTS FOR RECENTION

In review, in accordance with the recommendations [2], should be covered

the following issues:- Whether the work is reviewed, objectives and the requirements;- Urgency of the work;- Conformity assessment task partition and volume of work;- Evaluation of the content of all materials;- Reasonableness adopted in the research and design decisions;- Sufficient scientific and technical literature and the ability to use it;- Scientific and technical level and quality of the calculations;

- Assessment of the validity of the above set of design and technologicaldocumentation and quality of drawings - assessment of the accuracy standards;- The scope and feasibility of experimental studies, evaluation of the results;- Availability of samples, models and other results of the student and their level;- Possibility of application to production of the work in whole or in part;- Assessment of style statement and explanatory note line design standardrequirements;- Mistakes and shortcomings of the work.

End of the reviewer concludes on compliance of reviewed diplomaqualification requirements specifications for this specialist field and assesses thequality of work by four level system. The form of review is shown in Appendix M.

LIST OF REFERENCES

1. / .:... : , 2003.

2. / .: .., .., ..,... : , 2002. 40 .

3. , - / .: ..,.., ... : , 2002. 52 .

4. 8.091401/ .: ..,

.. . : , 2004. 56 .


20/33

5. State standards of Ukraine. GOST 3008-95. Documentation. Reports onscience and technology. The structure and design rules. Valid from01.01.96.


21/33


22/33

_________________ ______________________

_________________________________________________(, )

-

.____________

()____ _________2012 .

()

____________________________________________________(, ', )

1. ()________________________________________________________

_______________________________________________________________ __ ____________2012 .

2. _________________________________3.

()____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

4. ( ,

)___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

5. ( , )

______________________________________________________________________________________________________________________________


23/33

______________________________________________________________________________________________________________________________


24/33

6. ,

(,, ,

)

() ()

7. _________________________________________

()_______________________________________

() (, , , )

_________________________________

( )

(SHEDULE)

Number

()

()

____________________________________________

()

()____________________________

()


25/33

APPENDIX B

EXAMPLE OF TITUL FORM FOR DIPLOMA PROJECT (WORK)

Must be in Ukrainian! We gives you both variance so youll understandwhat you fill in Ukrainian


26/33

____________________________________________________

( )

______________________________________________________( )

()

____________________________________________________________( )

____________________________________________________________________________________________________________________________________________________________________________________

( )

-

._____________ _______ __________________( ) () (, )

______________ ___________________() (, ,

)

. _______________ ________________() (, )

2012 .


27/33

Ministry of Education and Science of Ukrain

KNURE

Faculty____________________________________________________

(full name)

Department____________________________________________________

(full name)

DIPLOMA PROJECT (WORK)

EXPLANATORY NOTE

____________________________________________________________(type of document)

____________________________________________________________

____________________________________________________________

(theme of diploma)

Professional-Teaching level Bachelor

Student gr._____________ _______ __________________

(group name) (signature) (name, surname)

Supervisor ______________ ___________________

(signature) (position, name)

Allowed to defense

Head of Dept. ________________ Popovsky V.V.

(signature)

2012y.


28/33

APPENDIX C (in Ukrainian)

INFORMATION FORM FOR DIPLOMA WORK ON BACHELOR'S DEGREE

.

1 . .001 55 .

2 ..001 1 3 ..002 2 4 ..003 3 5 ..004 6 ..005 1 7 ..006 2

,

8

9

..002 1. .

.

. ()

. . .

.


29/33

APPENDIX D

FORM FOR FRAME ON SLIDES


30/33

APPENDIX I

5

5=25

185

17

23

15

10

Them

eof

diplo

ma

Author

Family

Sign

utur

ee

Da

te

TCSDepar

tment


31/33

EXAMPLE OF THESIS SPECIFICATION FORM

..

..021-01 31 01 ..021 ..021-01 12 01 ..021-01 12 01

..021-1

.DLKS.exe.

..021-1 01

. WWKL.exe--

..021-1 02

. OSH.exe.--

..021-1 03 .

OPTIM.exe.--

..021. .

.

.

.

()

. .

. .

.

. . .


32/33

APPENDIX L

SUPERVISOR RESPONSE FORM

RESPONSE

at the work for the bachelors work

student______________________________________________________

(name and group of student)_____________________________________________________________

(number and name of specialty)

Theme ofdegree project (work) _______________________________

_____________________________________________________________

_____________________________________________________________

Response may be written in free style and shall contain the information listed inthese guidelines.

Supervisor of the Bachelor's degree work

____________________ __________________ _________________

(Name and surname) (position) (signuture)

__ ___________ 2012 y .


33/33

APPENDIX M

FORM ON RECENTION ON BACHELORS WORK.

May be in English or in Ukrainian

() .________________________

( )

_____________________________________________________________

(, , )

_________________________________________________(, )

()______________________________

____________________________________________________________

____________________________________________________________

():

- ______________________;

- ______________________.

(), .

___________________________________________________(, , , )

___ ______________ 20__. ____________________

()