Embed Size (px)
Citation preview
Cimberio made in Italy 20
HIGH ACCURACY BALANCINGAND FLOW MEASURAMENT VALVE
The high accuracy measurement, achieved by the spe-cial measuring system with “calibrated flow”, and theeasy installation of the CIMBERIO balancing set ensureeach terminal to receive the intended amounts of hea-ting or cooling for its best performance. This will alsoassure a constant temperature to all areas of the buil-ding, with reduced energy consumption. Moreover, should the installation show any inconve-nient, the CIMBERIO balancing set would enable thetechnicians to find out the position and the reason ofthe problem aroused.
Unbalanced system
Balanced system
The modern cooling systems should be projected toensure a high thermal performance with reducedenergy consumption, satisfying not only the thermalcomfort of the end-users, but meeting also with thetechnical normative and legislation. In order to guarantee the above, the terminals shouldreceive the intended amounts of heating or cooling toreach the best thermal performance. In other words,the hydraulic circuits must always be balanced per-fectly. To achieve this result, usually the design engineersproject installations able to reach a kind of “auto-balancing” system, with suitable position and dimen-sion of the circuits, using, for instance, reverse returncircuits or terminals with the same resistance.This kind of installations, in addition to high project andmaintenance costs, does not guarantee a perfect cir-cuit balancing, causing terminals hydraulic unbalan-ces which are the main reason of fluctuating tempera-tures in the different areas of the building, with ensuing troubles to the end-users and increases in the energy con-sumption. On the contrary, the installation of balancing valves CIMBERIO ensures a perfect balancing of the installation.
Indice☞
The idea to couple a double regulatingvalve to a fixed orifice device evolved inthe UK in the 1980s. This combinationwas designed specifically to overcomethe accuracy problems associated withflow measurements utilising the pressu-re drops across variable orifice valves.Variable orifice valves seldom achievethe accuracy and reliability of fixed orifi-ce valves. For a variable orifice valve, thepressure signal across the plug is usedfor flow measurement. A graph of therelationship between pressure drop andflow rate is required for each valve setting.The fundamental weakness of this design is that manufacturing tolerances can cause significant flow measure-ment distortions beyond a certain closure point, typically 50% closed. Beyond this point the flow measurementaccuracy can deteriorate dramatically, to ± 30% or more! Since most of the valve’s resistance is added in the lastpart of its closure, the valve’s balancing range is severely limited. The result is a valve, which has either limitedbalancing capability, poor flow measurement accuracy, or both. The limited operating range of variable orifice val-ves inevitably makes valve selection more difficult, often resulting in valve sizes, which are lower than adjoiningpipe sizes. Fixed orifice valves have none of these problems. Because the flow measurement function is separated from thebalancing function they can be regulated to nearly closed positions, achieving much higher balancing pressureswhilst maintaining flow measurement accuracy within ± 5% at any setting.Since their introduction, fixed orifice commissioning sets have become by far the most preferred choice for UKdesign engineers and installation contractors.
Cimberio Balancing valves21
ADVANTAGES OF FIXED ORIFICE OVER VARIABLE ORIFICEFLOW MEASUREMENT
VARIABLE ORIFICEFIXED ORIFICE
CIM 721PRESSURE SIMULATION
CIM 721FIXED ORIFICE
Indice ☞
Grms.
852
–
1124
–
1279
–
1778
–
2623
–
3875
–
A
161
–
185
–
186
–
207
–
259,5
–
281
–
B
125
–
145,5
–
158,5
–
168,5
–
212
–
230
–
C
85
–
97
–
113
–
144
–
163
–
193
–
D
15
–
16,3
–
19,1
–
21,4
–
21,4
–
25,7
–
E
184,5
–
215,5
–
224
–
245,5
–
309
–
337,5
–
F
52
–
52
–
52
–
52
–
58
–
58
–
Grms.
680
680
930
930
1130
1130
1655
1655
2465
2465
3725
3725
A
161
161
185
185
186
186
207
207
259,5
259,5
281
281
B
125
125
145,5
145,5
158,5
158,5
168,5
168,5
212
212
230
230
C
85
85
97
97
113
113
144
144
163
163
193
193
D
15
15
16,3
16,3
19,1
19,1
21,4
21,4
21,4
21,4
25,7
25,7
E
184,5
184,5
215,5
215,5
224
224
245,5
245,5
309
309
337,5
337,5
F
52
52
52
52
52
52
52
52
58
58
58
58
Grms.
663
–
935
–
1090
–
1589
–
2434
–
3686
–
A
161
–
185
–
186
–
207
–
259,5
–
281
–
B
125
–
145,5
–
158,5
–
168,5
–
212
–
230
–
C
85
–
97
–
113
–
144
–
163
–
193
–
D
15
–
16,3
–
19,1
–
21,4
–
21,4
–
25,7
–
E
184,5
–
215,5
–
224
–
245,5
–
309
–
337,5
–
F
52
–
52
–
52
–
52
–
58
–
58
–
Cimberio made in Italy 22
727 BALANCING AND FLOW MEASUREMENT VALVEPN 20 - B.S. 7350 TYPE - KM LIC.NO. 75180
747“CR” BRASS
“CR” BRASS
737“CR” BRASS
OT58 BRASS
747 OT
OT58 BRASS
727 OT
OT58 BRASS
737 OT
DN
Box
Cart.
1/2
1
12
3/4
1
12
1”
1
12
1 1/4”
1
6
1 1/2”
1
6
2”
1
6
745 BALANCING VALVE WITH FLOW MEASUREMENT DEVICEPN 16 - WATERMARK LIC. NO. WMKA 00217 748DN
Box
Cart.
1/2
1
12
3/4
1
12
1”
1
12
1 1/4”
1
6
1 1/2”
1
6
2”
1
6
WITH 2 PLUGS“CR” BRASS
WITH 1 BINDER POINTAND 1 DRAIN COCK
“CR” BRASS
Grms.
475
450
645
622
860
804
1275
1142
1890
1783
2800
2577
CR
OT
CR
OT
CR
OT
CR
OT
CR
OT
CR
OT
A
137,5
134,5
157
152,4
160
154
171
165
212
205
231
227
B
120
120
140
140
155
155
170,5
170,5
212
212
230
230
C
68
59
77
68
91
76
108
92
116
100
143
125
D
15
10
16,3
11,5
19,1
11,5
21,4
13
21,4
13
25,7
17
E
162,5
158,5
190
184,4
201,5
196
220
214
276
270
301,6
294
F
52
52
52
52
52
52
52
52
58
58
58
58
Grms.
710
685
910
887
1180
1124
1755
1622
2365
2258
3530
3307
A
195
191
208
207,5
210
206
230
223
265
266
290
296
B
120
120
140
140
155
155
170,5
170,5
212
212
230
230
C
120
115,5
128
123
140
128
165
150
175
161
200
182
D
15
10
16,3
11,5
19,1
11,5
21,4
13
21,4
13
25,7
17
E
211
202
227
227
236
233
267
255
315
313
346
341
F
52
52
52
52
52
52
52
52
58
58
58
58
1/2
3/4
1”
11/4”
11/2”
2”
DN
Cim 747Cim 747OT Cim 745 Cim 748
DN
Box
Cart.
1/2
1
12
3/4
1
12
1”
1
12
1 1/4”
1
6
1 1/2”
1
6
2”
1
6
DN
Box
Cart.
1/2
1
12
3/4
1
12
1”
1
12
1 1/4”
1
6
1 1/2”
1
6
2”
1
6
Cim 727Cim 727OT
Cim 737Cim 737OT
BALANCING VALVE WITH FLOW MEASUREMENT DEVICEPN 20 - B.S. 7350 TYPE - KM LIC.NO. 75180
BALANCING VALVE WITH FLOW MEASUREMENT DEVICEAND PRESSURE PLUG - PN 16 - WATERMARK LIC. NO. WMKA 00217
Indice☞
Cim 727PRSCim 727OT PRS
Cim 747PRSCim 747 OT PRS
Cim 737PRSCim 737 OT PRS
Cim 745PRSCim 748 PRS
Cimberio Balancing valves23
BALANCING AND FLOW MEASUREMENT VALVEPRESS FITTINGS - PN 20727 PRS
747 PRS BALANCING VALVE WITH FLOW MEASUREMENT DEVICEAND PRESSURE PLUG - PRESS FITTINGS - PN 16
BALANCING VALVE WITH FLOW MEASUREMENT DEVICE WITH PRESSURE PLUG AND DRAIN COCK - PRESS FITTINGS PN 16745 PRS
“CR” BRASS
BALANCING VALVE WITH FLOW MEASUREMENT DEVICEPRESS FITTINGS - PN 20737 PRS
“CR” BRASS
“CR” BRASS
WITH 2 PLUGS“CR” BRASS
OT58 BRASS
727 OTPRS
OT58 BRASS
737 OTPRS
OT58 BRASS
747 OTPRS
748 PRSWITH 1 BINDER POINT
AND 1 DRAIN COCK“CR” BRASS
DN
Box
Cart.
15x15
1
12
18x18
1
12
22x22
1
12
28x28
1
12
35x35
1
6
42x42
1
6
54x54
1
6
DN
Box
Cart.
15x15
1
12
18x18
1
12
22x22
1
12
28x28
1
12
35x35
1
6
42x42
1
6
54x54
1
6
DN
Box
Cart.
15x15
1
12
18x18
1
12
22x22
1
12
28x28
1
12
35x35
1
6
42x42
1
6
54x54
1
6
DN
Box
Cart.
15x15
1
12
18x18
1
12
22x22
1
12
28x28
1
12
35x35
1
6
42x42
1
6
54x54
1
6
Grms.
625
600
820
797
850
827
1175
1119
1715
1582
2480
2373
3702
3479
CR
OT
CR
OT
CR
OT
CR
OT
CR
OT
CR
OT
CR
OT
A
181
176
199
194,5
203,5
199
209
201
220
212
264,5
256,5
292
283
B
120
120
140
140
140
140
155
155
170,5
170,5
212
212
230
230
C
151,5
142,5
161,5
152,5
170
161
185,5
170
202
186
219
203
263
245
D
39,8
39,8
41,3
41,3
44
44
44
44
43
43
48
48
54
54
F
52
52
52
52
52
52
52
52
52
52
58
58
58
58
Grms.
835
835
1107
1107
1135
1135
1445
1445
2095
2095
3055
3055
4630
4630
A
205
205
229
229
233
233
235,5
235,5
256
256
311
311
341,5
341,5
B
126,5
126,5
147
147
147
147
160,5
160,5
170
170
212
212
230
230
C
168,5
168,5
181,5
181,5
190
190
207
207
238
238
266
266
313
315
D
39,8
39,8
41,3
41,3
44
44
44
44
43
43
48
48
54
54
F
52
52
52
52
52
52
52
52
52
52
58
58
58
58
Grms.
865
840
1090
1067
1115
1092
1495
1439
2195
2062
2955
2848
4435
4212
A
238
233
250
250
254
254
260
251
277
270
323,5
313,5
350
345
B
120
120
140
140
140
140
155
155
170,5
170,5
212
212
230
230
C
209
199
212,5
208
221
216,5
236
220,5
260
244
278
260
322
307
D
39,8
39,8
41,3
41,3
44
44
44
44
43
43
48
48
54
54
F
52
52
52
52
52
52
52
52
52
52
58
58
58
58
Grms.
1005
1005
1300
1300
1330
1330
1595
1595
2220
2220
3215
3215
4780
4780
A
205
205
229
229
233
233
235,5
235,5
256
256
311
311
341,5
341,5
B
126,5
126,5
147
147
147
147
160,5
160,5
170
170
212
212
230
230
C
168,5
168,5
181,5
181,5
190
190
207
207
238
238
266
266
313
313
D
39,8
39,8
41,3
41,3
44
44
44
44
43
43
48
48
54
54
F
52
52
52
52
52
52
52
52
52
52
58
58
58
58
15x15
18x18
22x22
28x28
35x35
42x42
54x54
DN
Indice ☞
Cimberio made in Italy 24
787 STRAIGHT BALANCING VALVE WITH BINDER POINTS - PN 20
“CR” BRASS
787 PRS“CR” BRASS
OT58 BRASS
787 OT
OT58 BRASS
787 OTPRS
DN
Box
Cart.
1/2
1
12
3/4
1
12
1”
1
12
1 1/4”
1
12
1 1/2”
1
6
2”
1
6
DN
Box
Cart.
15x15
1
12
22x22
1
12
28x28
1
12
35x35
1
12
42x42
1
6
54x54
1
6
STRAIGHT BALANCING VALVE PRESS FITTINGS - PN 20
FLOW RATE Cim 787 SERIES
Grms.
380
440
535
960
1120
1350
A
106
107
107
123
128
132
B
87,5
89,5
91,5
99
99
100
C
75
80
87
108
115
124
D
16
19
21
22,5
23
26,5
F
50
50
50
50
50
50
Grms.
535
650
850
1400
1700
2250
A
106
107
107
123
128
132
B
87,5
89,5
91,5
99
99
100
C
159
173,5
181,5
202
218
244
D
39,8
44
44
43
48
54
F
50
50
50
50
50
50
DN
1/2
3/4
1”
11/4”
11/2”
2”
DN
15x15
22x22
28x28
35x35
42x42
54x54
Cim 787 - Cim 787OT Cim 787 PRS - Cim 787OTPRS
OPENING TURNS N°
Kv: flow rate in m3/h with 1 bar of pressure drop - MEDIUM: water - TEMPERATURE: 15,5°C
Indice☞
Cimberio Balancing valves25
3723 FLANGED FLOW MEASUREMENT DEVICE
DN
DN
50
200
100
350
125
400
150
DN
D
H
Kvs (m3/h)
FlangeThickness
50
108
149
18
70,5
65
127
159
18
104,5
80
142
166
18
120,0
100
162
176
18
226,3
125
192
191
18
330,3
150
218
204
18
527,6
200
273
232
18
746,0
250
329
260
18
1.118,3
300
384
287
18
1.765,2
350
444
317
20
1.966,8
400
496
343
23
2.482,6
65
250
80
300
3739 FLANGED GLOBE BALANCING VALVE - PN 16
DN
DN
50
150
65
200
80
250
100
300
125
DN
Kg.
Ø A
B
C
Ø D
Ø E
n x Ø d
50
10
70
125
230
165
125
4x19
65
16
140
187
290
185
145
4x19
80
20
140
205
310
200
160
8x19
100
29
140
222
350
220
180
8x19
125
42
140
251
400
250
210
8x19
150
54
140
247
480
285
240
8x23
200
196
360
721
600
340
295
12x23
250
358
400
808
730
405
355
12x28
300
464
400
855
850
460
410
12x28
Cim 3739 flanged balancing valves are used where an accura-te flow measurement in big heating or cooling systems is nee-ded. The cast iron valves have flanges PN 16 and a valve posi-tion storage device, enabling the opening and closing of thevalve at the pre-set position. They are supplied with binder points Cim 723. A correct instal-lation of the balancing valves and of flow measurement jointCim 3723 shall be made in accordance with the distances sta-ted in the drawing, in order to regularize the flow and allow anaccurate flow measurement.
DN 50-150 DN 200-300
Flanged balancing valves
Indice ☞
Cimberio made in Italy 26
721 722DN
FLOW MEASUREMENT DEVICE
728 728CDN
Box
1/2
1
3/4
1
1”
1
1 1/4”
1
1 1/2”
1
2”
1
INSULATING CASE FOR BALANCING VALVES
729 MEASURINGNEEDLE
DN 1/4 DN 3/4
730CAP WITHBINDER POINTS
1/2 3/4 1” 1 1/4” 1 1/2” 2”
DN
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
Grms.
161
207
252
400
460
710
A
8,4
12,8
16,6
23,5
28,4
39,6
B
25
28
31
36
39
45
C
66,5
66,5
63,5
71
71
79,5
D
15
16,3
19,1
21,4
21,4
25,7
Cim 722 Cim 723
Cim 723L
723 723LDN DN1/4
cim 721 - 747cim 3739 - 3723
1/4
cim 787
BINDER POINTS
Indice☞
Cimberio Balancing valves27
MONOLINKCimberio Monolink is an innovative compact fan coil con-nection system, enabling to reduce installation and main-tenance times of the plant. Monolink is a preassembledand pre-tested module gathering in one item all compo-nents needed for the fan coil working and that are usuallyassembled on the yard, i.e. valve with built-in strainer, bypass valve, drain cock, balancing valve.
733 MONOLINK 733 PRS
732
731 CONNECTION SYSTEM FOR FAN-COIL F/M
PATENT PENDING
CONNECTION SYSTEM FOR FAN-COIL M/PRS
1/2 x 1/2 3/4 x 3/4
1/2 x 15 3/4 x 22
1/2 x 1/2
3/4 x 3/4 3/4 x 22
1/2 x 15
Indice ☞
SimplicityNine buttons designed for simple navigation allow quick and efficient use ofthe menu system. The is arranged with a choice of screendisplays-whether it be the full parameter, showing all the data available orsimply a screen showing in large text just the differential pressure, the userhas the option to select the most appropriate screen for the work being car-ried out.
is a state of the art electronic commissioningmeter for measurement of differential pressures and flow-ratesof water in HVAC systems. A wide range of features coupledwith a database of over 1300 valves, from 34 world manufactu-rers, make the the first choice meter for com-missioning engineers.
AccuracyThe uses a sensor calibrated to 20 points and protec-ted by “DSP tecnology™” allowing the use of sensors most appro-priate for the measurement ranges experienced in HVAC and notcompromised by the need for sensors selected for high over-pressurewith their poor accuracy and resolution at low dp readings.Accuracy is better than 1% or 100 Pascals with system damping tofurther improve reading confidence on unstable systems.
ConvenienceCompactness and light weight enable the user to operate effectively withoutthe inconvenience of bulky equipment. Backlit display, anti kink pipes, snapconnectors and approximately 20 hours use from readily available PPS typebatteries. The is supplied in a convenient carry case.
ELECTRONIC COMMISSIONINGTO A NEW LEVELNow with unique “DSP tecnology™” for sensor protection
Multi parameter displayfor complete system information.
Simple largedigit displaysfor less complexoperations.
Easy to navigatemenu system.
AC6
AC6
Commissioning Unit
AC6
AC6
AC6
AC6
PATENT PENDING
Cimberio made in Italy 28
726
Indice☞
SpecificationTechnical DescriptionThe is an electronic manometer program-med to carry out differential pressure measurements pri-marily on balancing valves in the building services industry.The state-of-the-art software and extensive database ofthe world’s balancing valves allows direct reading of flow,differential pressure, percentage of design flow and targetflow.The nine button design allows simple navigation of theeasy-to-follow menu system with all parameters visible onscreen.System accuracy is guaranteed by the use of carefully selec-ted sensors protected by “DSP tecnology™” with resolu-tion and accuracy most appropriate for the range of diffe-rential pressures being measured.
Measurement AccuracyDifferential pressure: better than 100 Pascals or 1% whichever is the greatest.
Measurement Range0.1 kPa to 250 kPa0 to 95 deg c
Effective Operating Time20 hours with standard Alkaline PP3 battery.
User InterfaceSoftware for the has been designed around sim-ple text files which are supplied on CD rom. Users wishing to edit thefiles can simply remove the MMC card from theand using a suitable read/write device and text editor can make thedesired changes. Typically, users might wish to add valves or devicesnot held on the database or, modify the list of valves displayed on the
to allow quicker access to preferred valves.
Database1300 valves and measuring devices from 34 manufacturers.
SparesTool belt for hands free portability.Replacement hoses up to 3 metres in length.Mechseal style and insertion testpoints.
AC6
AC6
AC6
Cimberio Balancing valves29
Box 1
725 ANALOGUE DIFFERENTIAL MANOMETER
Box 1
726 ELECTRONIC DIFFERENTIAL MANOMETER
FunctionsDisplaysMain display: shows valve type, Kvs value, handwheel setting(Variable orifice), Design flow, target Flow, Differential pressure,Flow, valve maker, valve type, valve size.
Pressure display: large text Differential pressure.
Flow Display: Large text flow.
Predictive handwheel position: For adjusting variable orifice val-ves.
Chart recorder: Sample system characteristic.
Fast valve: Up to eight valves with model, size and design flowattributes can be saved to a quick access location for fast recallwhen balancing systems with multiple valve types/sizes.
Help: Context sensitive help is available for all functions.Dedicated button available for this function
UnitsDifferential pressure: Pa, kPa, psi, bar, feet H2O, InchesH2O, mtrs H2O, mm H2O, cm H2O.
Flow: l/s, l/m, l/h, galls/m (imperial), gpm (US).
Temperature: Celsius, Fahrenheit.Edit FunctionsDesign flow, target flow, specific gravity, Kvs, valve maker, valvegroup, valve model, valve size, handwheel position.Zero cutoff.
AC6
Indice ☞
Cimberio made in Italy 30
Operating range
727
747
Indice☞
Cimberio Balancing valves31
Pressure signal graph
721 - 737
747 - 747 PRS
Indice ☞
Turn index HostaformMemory CW602NPin SteelKnob Nylon 6Entrainer CW602NCap HostaformElastic ring SteelOutdistance Nylon(only for DN 3/4 - 1” - 1 1/4”)
Body CC752SBonnet CW602NStem CW602NGasket EPDMShutter CW602NO-Ring HNBRIndex HostaformSeeger Bronze1/10 turn index Hostaform
747
Cimberio made in Italy 32
Cimberio made in Italy 34
SERVICE RECOMMENDATIONS:The industrial valves can be used in many installa-tions among industrial and agricultural applica-tions: heating plants, sanitary systems, plumbingservices, compressed air, steam networks, gasoli-ne and other hydrocarbons networks.The globe valves are specially recommended in allinstallations where a fine and efficient regulation ofthe media is required.The check valves Cimberio can be installed inpipelines to permit flow in one direction only, andclose automatically if the flow reverses. The flowvelocity of the media keeps the valve open whilstback pressure or gravity cause automatic shut-offthereby preventing flow reversal.
Cimberio industrial valves
Body Bronze EN 1982 CC491KBonnet Brass EN 12165 CW617 NStem Brass EN 12164 CW617 NGland nut Brass EN 12164 CW617 NGland Brass EN 12164 CW617 NGland Packing AF 15/MAPacking NA 1100Disc Holder Brass EN 12164 CW617 NDisc P.T.F.E.Disc nut Brass EN 12164 CW617 NSelf locking nut SteelHandwheel Aluminium EN AB 46100
CIM30VA
CIM30
58 87 116 145 174 203 232 261 290 319200
180
160
140
120
100
80
60
392
356
320
284
248
212
176
1404 6 8 10 12 14 16 18 20 22
CIM80
CIM80A
58 87 116 145 174 203 232 261 290200
180
160
140
120
100
80
60
392
356
320
284
248
212
176
1404 6 8 10 12 14 16 18 20
Cold service: 20 bar from –10 up to 100°C Saturated steam: 9 bar at 180°C
Cold service: 16 bar from –10 up to 100°CSaturated steam: 7 bar at 170°C
Cold service: 20 bar from –10 up to 95°CSaturated steam: 4 bar at 150°C
Cold service: 16 bar from –10 up to 100°CSaturated steam: 4 bar at 150°C
Cold service: 16 bar from –10 up to 95°C Cold service: 16 bar from –10 up to 40°C
WORKING PRESSURE AND TEMPERATURE
cim 61 - 62 - 73 - 74 - 74A - 74 ACR - 81 - 60 - 79A
cim 30 - 30VA - 30DK - 30PRS
cim 32 - 33CREA - 33CREA RB - 33CREA PRS
cim 75 - 76 - 81L - 82 - 78 - 77 - 79
cim 95 - 95A
cim 80 - 80A
EN ISO9001:2000
Indice☞
Cimberio Industrial valves35
BRONZE OBLIQUE VALVEWITH SPRING-LOADED NON RETURN VALVE - PN 2061
DN
Box
Cart.
DN
Box
Cart.
DN
Box
Cart.
DN
Box
Cart.
BRONZE OBLIQUE VALVE WITH SPRING LOADED N. R. VALVEAND DRAIN COCK AND PLUG - PN 2062
BRONZE OBLIQUE VALVE WITHOUT DRAIN - PN 2073
BRONZE OBLIQUE VALVE WITH DRAIN AND PLUG - PN 2074
Grms.
315
355
520
810
1160
1350
2250
–
–
–
A
50
55
60
65
75
80
90
–
–
–
B
85
90
115
135
160
174
210
–
–
–
C
56
59
68
76
92
100
125
–
–
–
D
11
11
12
14
15
15
18
–
–
–
DN
3/8
1/2
3/4
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
Cim 61 - Cim 62
Grms.
290
330
470
690
1090
1390
2300
3970
5860
10940
A
50
55
60
65
75
80
90
120
140
175
B
85
90
115
135
160
174
210
255
310
360
C
56
59
68
76
92
100
125
147
175
217
D
11
11
12
14
15
15
18
21
24
28
Cim 73 - Cim 74
3/8
25
100
1/2
25
100
3/4
15
60
1”
10
40
1 1/4”
6
24
1 1/2”
4
16
2”
2
8
2 1/2” 3” 4”
3/8
25
100
1/2
25
100
3/4
15
60
1”
10
40
1 1/4”
6
24
1 1/2”
4
16
2”
2
8
2 1/2” 3” 4”
3/8
25
100
1/2
25
100
3/4
15
60
1”
10
40
1 1/4”
6
24
1 1/2”
4
16
2”
2
8
2 1/2”
2
4
3”
1
2
4”
1
2
3/8
25
100
1/2
25
100
3/4
15
60
1”
10
40
1 1/4”
6
24
1 1/2”
4
16
2”
2
8
2 1/2”
2
4
3”
1
2
4”
1
2
Indice ☞
Cimberio made in Italy 36
DN
15x15
18x18
22x22
28x28
35x35
42x42
54x54
BRONZE OBLIQUE STRAINER - PN 2074 A
DN
Box
Cart.
OBLIQUE STRAINER - IN DZR BRASS “CR” ALLOY - PN 2074 ACR
OBLIQUE STRAINER - IN DZR BRASS “CR” ALLOY - PRESSFITTING - PN 2074 ACRPDN
Box
Cart.
DN
Box
Cart.
BRASS OBLIQUE STRAINER - PN 2074 AODN
Box
Cart.
Grms.
190
230
315
485
765
935
1710
2510
4230
7040
A
38
40
46
58
70
80
100
115
136
167
B
51
56
65
81
99
111
140
163
195
240
C
55
59
68
76
92
100
125
147
175
217
D
11
11
12
14
15
15
18
21
24
28
Grms.
–
185
285
405
650
870
1675
A
–
40
50
60
71
81,5
100
B
–
56
70
83
100
112,5
140
C
–
59
68
76
92
100
125
D
–
11
13,5
13,5
15
15
19
DN
3/8
1/2
3/4
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
Cim 74A
Grms.
–
210
315
455
760
975
1825
A
–
39
49,5
59
70
81
99
B
–
54
68
82
99
112
138,5
C
–
68
77
91
108
116
143
D
–
15
16,3
19,1
21,4
21,4
25,7
Cim 74AO Cim 74ACR
Grms.
365
495
520
770
1200
1565
2730
A
39
49,5
49,5
59
70
81
99
B
54
68
68
82
99
112
138,5
C
155
165
170
280
202
220
265
D
39,8
41,3
44
44
43
48
54
Cim 74ACRP
3/8
50
200
1/2
50
200
3/4
30
120
1”
20
80
1 1/4”
12
48
1 1/2”
10
40
2”
4
16
2 1/2”
4
8
3”
1
6
4”
1
2
1/2
50
200
3/8 3/4
30
120
1”
20
80
1 1/4”
10
40
1 1/2”
8
32
2”
4
16
15x15
50
200
18x18
25
100
22x22
15
60
28x28
10
40
35x35
8
32
42x42
4
16
54x54
4
16
3/8 1/2
50
200
3/4
30
120
1”
20
80
1 1/4”
12
48
1 1/2”
10
40
2”
4
16
STRAINER: stainless steel 18/8mm 0,65 suitable for water - mm 0,25 suitable for gas
Double tightening gasket between body and cap:NA 1100 Fibre - O’ring HNBR
Mesh30
N. holes cm2
52
Mesh60
N. holes cm2
280
F=0,65 mm F=650μm
F=0,25 mm F=250μm
Indice☞
Cimberio Industrial valves37
DN
15x15
18x18
22x22
28x28
35x35
42x42
54x54
BRONZE OBLIQUE STRAINER - PN 20WITH DRAIN PLUG WITH DRAIN VALVE74 A/1 74 A/2
74 ACR/1
74 ACRP/1
DN
Box
Box
74 AO/1
Grms.
–
230
315
485
765
935
1710
A
–
40
50
60
70
80
100
B
–
56
65
81
99
111
140
C
–
59
68
76
92
100
125
D
–
11
12
14
15
15
18
F
–
G1/4
G1/4
G3/8
G3/8
G3/8
G3/8
Grms.
–
185
285
405
650
870
1675
A
–
40
50
60
71
81,5
100
B
–
56
70
83
100
112,5
140
C
–
59
68
76
92
100
125
D
–
11
13,5
13,5
15
15
19
F
–
G1/4
G1/4
G3/8
G3/8
G3/8
G3/8
Grms.
–
215
325
500
850
1030
1885
A
–
39
49,5
59
70
81
99
B
–
54
68
82
99
112
138,5
C
–
68
77
91
108
116
143
D
–
15
16,3
19,1
21,4
21,4
25,7
F
–
G1/4
G1/4
G3/8
G3/8
G3/8
G3/8
DN
3/8
1/2
3/4
1”
1 1/4”
1 1/2”
2”
Cim 74 A/1 - Cim 74A/2 Cim 74 AO/1 - Cim 74AO/2 Cim 74 ACR/1 - Cim 74ACR/2
Grms.
365
490
515
815
1285
1620
2805
A
39
49,5
49,5
59
70
81
99
B
54
68
68
82
99
112
138,5
C
151,6
161,4
170
185,3
202
219
263
D
39,8
41,3
44
44
43
48
54
F
G1/4
G1/4
G1/4
G3/8
G3/8
G3/8
G3/8
Cim 74 ACRP/1 - Cim 74ACRP/2
1/2
50
50
3/4
30
30
1”
20
20
1 1/4”
12
12
1 1/2”
10
10
2”
4
4
DN
Box
Box
1/2
50
50
3/4
30
30
1”
20
20
1 1/4”
12
12
1 1/2”
10
10
2”
4
4
DN
Box
Box
1/2
50
50
3/4
30
25
1”
20
15
1 1/4”
10
10
1 1/2”
8
8
2”
4
4
DN
Box
Box
15x15
50
50
18x18
25
25
22x22
15
15
28x28
10
10
35x35
8
8
42x42
4
4
54x54
4
4
BRASS OBLIQUE STRAINER - PN 20WITH DRAIN PLUG WITH DRAIN VALVE 74 AO/2
OBLIQUE STRAINER - IN DZR BRASS “CR” ALLOY - PN 20WITH DRAIN PLUG WITH DRAIN VALVE 74 ACR/2
OBLIQUE STRAINER - IN DZR BRASS “CR” ALLOY PRESSFITTING - PN 20 WITH DRAIN PLUG WITH DRAIN VALVE 74 ACRP/2
STRAINER: stainless steel 18/8 - mm 0,65 suggested for water
Double tightening gasket between body and cap: NA 1100 Fibre - O’ring HNBR
Indice ☞
Cimberio made in Italy 38
BRONZE GLOBE VALVE - PN 16METAL TO METAL SEATING P.T.F.E. DISC75 81 L
BRONZE GLOBE VALVE - P.T.F.E. DISC - STANDARD TYPE - PN 2081
DN
Box
Cart.
BRONZE CHECK VALVE METAL TO METAL SEATING - PN 1678
DN
Box
Cart.
BRONZE LIFT CHECK VALVE - P.T.F.E. DISC - PN 2079A3/8
50
200
Grms.
225
295
420
640
950
1230
1890
4120
5270
10060
A
50
55
60
65
65
75
80
120
120
175
B
75
77,5
90,5
100,5
117
131
145
201
224
279,5
C
45
50
60
70
85
90
110
135
148
190
D
9
11
12
14
16
16
18
23
22
23
DN
3/8
1/2
3/4
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
Cim 75
Grms.
305
370
545
905
1170
1660
3010
–
–
–
A
55
55
60
65
75
80
90
–
–
–
B
95
97
109
127
149
158
174
–
–
–
C
57
60
70
84
92
107
126
–
–
–
D
11
11
10
15
16
18
19
–
–
–
Cim 81
Grms.
225
295
415
640
950
1225
1860
3950
5265
10690
A
50
55
60
65
65
75
80
120
120
175
B
80
83
95
105
125
150
165
225
255
320
C
45
50
61
70
85
90
110
135
146
190
D
9
11
12
14
16
16
18
23
22
23
Cim 81 L
Grms.
160
205
315
520
860
1060
1710
3320
4250
8560
A
–
–
–
–
–
–
–
–
–
–
B
30
30
35
41
49
56
63
73,5
88
110
C
45
50
60
70
85
90
110
135
148
190
D
9
11
12
14
16
16
18
23
22
23
Cim 78
Grms.
225
280
450
800
970
1500
2640
3450
4450
8480
A
–
–
–
–
–
–
–
–
–
–
B
32,5
36
40
49
56
60
71,5
73,5
88
110
C
58
60
70
84
92
107
126
135
148
190
D
11
12
12
14
16
18
19
23
22
23
Cim 79 A
DN
Box
Cart.
3/8
50
200
3/8
30
120
1/2
25
100
3/4
18
72
1”
10
40
1 1/4”
8
32
1 1/2”
4
16
2”
2
8
2 1/2” 3” 4”DN
Box
Cart.
3/8
50
200
1/2
50
200
3/4
50
200
1”
30
120
1 1/4”
15
60
1 1/2”
12
48
2”
6
24
2 1/2”
4
12
3”
2
8
4”
1
4
1/2
50
200
3/4
25
100
1”
15
60
1 1/4”
12
48
1 1/2”
6
24
2”
4
16
2 1/2”
4
12
3”
2
8
4”
1
4
1/2
35
140
3/4
25
100
1”
16
64
1 1/4”
8
32
1 1/2”
6
24
2”
4
16
2 1/2”
2
6
3”
1
4
4”
1
2
Indice☞
Cimberio Industrial valves39
FLANGED BRONZE GLOBE VALVE METAL TO METAL SEATING - PN 16DRILLING TO PN 6 - PN 10 - PN1676
DN
mm.
FLANGED BRONZE GLOBE VALVE - P.T.F.E. DISC - PN 16DRILLING TO PN 6 - PN 10 - PN 1682
FLANGED BRONZE LIFT CHECK VALVE - P.T.F.E. DISC - PN 16DRILLING TO PN 6 - PN 10 - PN 1679
FLANGED BRONZE CHECK VALVE METAL TO METAL SEATINGDRILLING TO PN 6 - PN10 - PN1677
Grms.
1240
1720
2290
3330
4610
6100
8890
11650
18110
A
55
55
65
65
80
80
120
120
175
B
98
108
120
130
155
165
210
265
305
C
84
95
105
115
134
156
170
180
200
D
95
105
120
140
150
165
185
200
230
E
8
8
9,5
9,5
11
11
13
13
17
DN
1/2
3/4
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
mm.
15
20
25
32
40
50
70
80
100
Cim 76
Grms.
1230
1710
2295
3315
4625
6000
8840
11500
17860
A
55
55
65
65
80
80
120
120
175
B
98
108
120
130
155
165
210
265
305
C
84
95
105
115
134
156
170
180
200
D
95
105
120
140
150
165
185
200
230
E
8
8
9,5
9,5
11
11
13
13
17
Grms.
1220
1650
2330
3450
4430
5750
8050
10270
16140
C
84
95
105
115
134
156
170
180
200
D
95
105
120
140
150
165
185
200
230
E
8
8
9,5
9,5
11
11
13
13
17
Cim 82 Cim 77 - Cim 79
1/2
15
3/4
20
1”
25
1 1/4”
32
1 1/2”
40
2”
50
2 1/2”
70
3”
80
4”
100
1/2
15
3/4
20
1”
25
1 1/4”
32
1 1/2”
40
2”
50
2 1/2”
70
3”
80
4”
100
DN
mm.
DN
mm.
1/2
15
3/4
20
1”
25
1 1/4”
32
1 1/2”
40
2”
50
2 1/2”
70
3”
80
4”
100
DN
mm.
1/2
15
3/4
20
1”
25
1 1/4”
32
1 1/2”
40
2”
50
2 1/2”
70
3”
80
4”
100
Indice ☞
Cimberio made in Italy 40
BRASS SWING CHECK VALVE - METAL TO METAL SEATING - PN 1680
BRASS SWING CHECK VALVE - RENEWABLE EPDM DISC - PN 1680 ADN
Box
Cart.
DN
Box
Cart.
SPRING-LOADED CHECK VALVE - PN 1632
Grms.
–
50
95
160
260
360
715
B
–
33
38
44
49
57
75
D
–
13,5
13,5
15
17
19
22
D1
–
14,5
14,5
15,5
17
19
20
DN
3/8
1/2
3/4
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
Cim 32
HOT PRESSED STOP COCK HEAVY TYPE - PN 2060DN
Box
Cart.
3/8 1/2
50
200
3/4
25
100
1”
20
80
1 1/4”
12
48
1 1/2”
10
40
2”
5
20
2 1/2”
4
16
3”
2
8
4”
2
4
3/8 1/2
50
200
3/4
25
100
1”
20
80
1 1/4”
12
48
1 1/2”
10
40
2”
5
20
2 1/2”
4
16
3”
2
8
4”
2
4
3/8
50
200
1/2
35
140
3/4
25
100
1”
16
64
Grms.
–
230
335
480
720
880
1455
2080
3010
5550
B
–
42
45
53
61
62,5
70
86
94
115
C
–
52
62
70
84
87
106
118,5
136,5
170
D
–
13
13
14
16
16
17
23
28
25
Cim 80 - Cim 80A
O
0,7
0,7
0,7
0,7
0,7
0,7
0,4
0,4
0,5
V
11
9
9
8
8
9
9
9
9
Opening pressure inner valveO = horiz. inst. - V = vert. inst.
Cim 80
3/8 1/2
50
200
3/4
50
200
1”
25
100
1 1/4”
15
60
1 1/2”
10
40
2”
8
32
DN
Box
Cart.
The spring loaded inner valve
opens and lifts with a pressure
of 10 mbar (0,14 psi)
DN
Grms.
A
B
C
D
3/8
230
50
80
52
10
1/2
290
55
91
57
12
3/4
420
55
98
63
14
1”
650
65
110
73
14
O
0,7
0,7
0,7
0,7
0,7
0,7
0,4
0,4
0,5
V
11
9
9
8
8
9
9
9
9
Cim 80/A
Indice☞
B
55
55
62
72
82
96
109
129
141
146
C
35
35
42
50
60
70
83
103
123
160
D
10
12
13
14
16
18
20
25
25
26
Cimberio Industrial valves41
“SPRINT” SPRING-LOADED CHECK VALVE - PN 2030DN
Box
Cart.
“SPRINT” SPRING-LOADED CHECK VALVE FOR HYDROCARBONS - PN 2030 DKDN
Box
Cart.
“SPRINT” SPRING-LOADED CHECK VALVE FOR STEAM - 4 BAR - 150°C30 VADN
Box
Cart.
“SPRINT” SPRING-LOADED CHECK VALVE - PRESSFITTING - PN 2030 PRSDN
Box
Cart.
Grms.
175
155
240
370
480
915
1320
2505
3490
5140
DN
3/8
1/2
3/4
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
Grms.
310
420
445
685
920
1505
2225
–
–
–
B
140
150
155
170
175
200
230
–
–
–
D
39,8
41,3
44
44
43
48
54
–
–
–
DN
15x15
18x18
22x22
28x28
35x35
42x42
54x54
–
–
–
Cim 30 - Cim 30 DK - Cim 30 VA Cim 30 PRS
3/8
50
200
1/2
50
200
3/4
25
100
1”
20
80
1 1/4”
12
48
1 1/2”
8
32
2”
5
20
2 1/2”
4
12
3”
3
6
4”
2
4
3/8
50
200
1/2
50
200
3/4
25
100
1”
20
80
1 1/4”
12
48
1 1/2”
8
32
2”
5
20
2 1/2”
4
12
3”
3
6
4”
2
4
3/8
50
200
1/2
50
200
3/4
25
100
1”
20
80
1 1/4”
12
48
1 1/2”
8
32
2”
5
20
2 1/2”
4
12
3”
3
6
4”
2
4
18x18
30
120
15x15
30
120
22x22
30
120
28x28
15
60
35x35
10
40
42x42
5
20
54x54
2
8
Body Brass EN 12165 CW617NScrewed end Brass EN 12165 CW617NInner valve HostaformInner valve gasket EPDMSpring stainless steel 18/8
Inner valve: Cim 30: hostaformCim 30/DK: hostaformCim 30/VA: PPS
Inn. val. gasket: Cim 30: EPDMCim 30/DK: FKMCim 30/VA: EPDM PEROX
The inner valve opens and
lifts with a pressure of
25 mbar (0,36 psi)
Indice ☞
Grms.
267
350
377
585
786
1055
1650
A
143
151,5
160
172
170
189
222
B
39,8
41,3
44
44
43
48
54
CH
25
31
31
38
47
54
66
Cim 33CREAPRS
Grms.
174
–
249
400
–
–
–
A
59,5
–
67
78
–
–
–
B
13
–
15
16
–
–
–
CH
25
–
31
38
–
–
–
Cimberio made in Italy 42
Grms.
115
173
271
350
510
780
–
A
59,5
67
78
76
86
102
–
B
15
16,3
19,1
15
17
18
–
CH
25
31
38
47
54
66
–
DN
1/2
3/4
1”
1 1/4”
1 1/2”
2”
–
mm.
15x15
18x18
22x22
28x28
35x35
42x42
54x54
CONTROLLABLE ANTI-POLLUTION CHECK VALVE IN DZR BRASS “CR” ALLOYCOMPRESSION ENDS - PN 1633 CREARB
mm.
Box
Cart.
15x15
25
100
22x22
20
80
28x28
12
48
CONTROLLABLE ANTI-POLLUTION CHECK VALVE IN DZR BRASS “CR” ALLOYPRESS ENDS - PN 1633 CREAPRS
mm.
Box
Cart.
18x18
15
60
15x15
20
80
22x22
15
60
28x28
10
40
35x35
8
32
42x42
4
16
54x54
2
8
THRD.
ISO7/1
ISO228
Cim 33CREA Cim 33CREARB
CONTROLLABLE ANTI-POLLUTION CHECK VALVE
DN
Box
Cart.
3/4
24
96
1/2
40
160
1”
20
80
1 1/4”
20
80
1 1/2”
15
60
2”
10
40
CONTROLLABLE ANTI POLLUTION CHECK VALVE IN DZR BRASS “CR” ALLOY - PN 1633 CREA
The CIM33CREA CONTROLLABLE ANTI-POLLUTION check valve is manufac-tured in accordance with the EN 1717 Class EA European Standard. This standard deals with methods for preventing the contamination ofpotable water as a result of backflow. The hygienic protection of the watersupply system is achieved by using components fabricated from materialscompatible with potable water, guarding against cross connections, pre-venting backflow and ensuring that the components are controllable.
Manufactured in “CR” (dezincification resistant) brass, this valve can beinstalled in any position, and will allow only uni-directional flow.The valve opens automatically when the upstream pressure is greaterthan downstream pressure. If the downstream pressure is greater, or a“no flow” situation exists, the valve is closed by the action of a spring.The spring valve is KIWA, WRC, NF, DVGW approved.Opening pressure 10 mbar. Working temperature from -10° until 95°C.
Body CW602NHousing POMValve POMTorpedo POMSeal NBRSpring Stainless steel 18/8O-Ring NBRPlug CW602N
Opening pressure inner valve: 10mbar
Indice☞
Cimberio Industrial valves43
FILTERING FOOT VALVE “TYPE 33 CREA” - “CR” - PN 16 - Filtering Foot in Inox
“SPRINT” SPRING-LOADED FILTERING FOOT VALVE - PN 20 Filtering Foot in Inox30 A
33 ACREADN
Box
Cart.
DN
Box
Cart.
FILTERING FOOT VALVE - PN 1695DN
Box
Cart.
FILTERING FOOT CHECK VALVE - PN 16Filtering Foot in Inox from 1/2 to 1 1/2“ in Brass from 2” to 4”95 A
DN
Box
Cart.
5” 6”
1/2
20
80
3/4
14
56
1”
12
48
1 1/4”
5
20
1 1/2”
5
20
2”
2
8
2 1/2”
2
8
3”
2
4
4”
1
2
5” 6”
4”
2
4
5” 6”3”
2
12
2 1/2”
2
12
2”
7
28
1 1/2”
10
40
1 1/4”
15
60
1”
30
120
3/4
50
200
1/2
50
200
Grms.
185
275
375
495
640
1010
1910
2465
4870
11950
14850
B
62
76
87
98
106
120
145
160
209
290
336
C
39
46
55
64
69
87
108
126
166
200
235
D
9
11
11
13
13
13
15
15
17
19
21
Grms.
130
225
310
480
695
1220
2205
2940
4890
–
–
B
97
114
130
145
169
171
208
228
259
–
–
C
26
32
38
47
54
66
83
96
123
–
–
D
10
12
13
15
15
22
20
20
24
–
–
Grms.
165
270
415
620
960
1375
2600
3615
5310
–
–
B
98
110
120
134,5
163
192
213
240
260,5
–
–
C
35
42
50
60
70
83
103
123
160
–
–
D
12
13
14
16
18
20
25
25
26
–
–
Grms.
126,5
188
294,5
383
550
836
–
–
–
–
–
B
103
114,5
125,5
133
153
185
–
–
–
–
–
C
31
37
44,5
53
59,5
72
–
–
–
–
–
D
15
16,3
19,1
15
17
18
–
–
–
–
–
DN
1/2
3/4
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
5”
6”
Cim 95 Cim 95A Cim 30A Cim 33ACREA
6”
1
5”
1
2
4”
2
4
3”
2
8
2 1/2”
3
12
2”
7
28
1 1/2”
12
48
1 1/4”
15
60
1”
24
96
3/4
40
160
1/2
50
200
1/2
20
80
3/4
14
56
1”
12
48
1 1/4”
5
20
1 1/2”
5
20
2”
2
8
2 1/2” 3” 4”
Indice ☞
Cimberio made in Italy 44
Flow and pressure drop
CIM 73 - 74
CIM 74A - 74ACR - 74AO
C81CIM 76 - 82
CIM 61 - 62
CIM75 - 81L
Indice☞
Cimberio Industrial valves45
Flow and pressure drop
CIM95
60
30A
CIM 32 - 33CREAC 30
CIM 80 - 80A
Indice ☞
Cimberio made in Italy 46
Cimberio Industrial valves47
Cimberio made in Italy 48
75
Body Bronze EN1982 CC491KBonnet EN12165 CW617NStem EN12164 CW617NGland nut EN12164 CW617NGland EN12164 CW617NGland packing PTFEPacking NA 1100Disc stem ring EN12164 CW617NDisc EN12164 CW617NSelf locking nut SteelHandwheel EN AB46100
Body EN1982 CC754SBonnet EN12165 CW617NPacking NA 1100Swing disc EN12165 CW617NDisc face EPDMWasher EN12164 CW614NScrew EN12164 CW614NSpindle EN12164 CW614N
61
Body Bronze EN1982 CC491KBonnet EN12165 CW617NStem EN12164 CW617NGland nut EN12164 CW617NGland EN12164 CW617NGland packing PTFEPacking NA 1100Spring Phosphor bronzeDisc holder EN12164 CW617NDisc EPDMDisc nut EN12164 CW617NSelf locking nut SteelHandwheel EN AB46100
80A
Body EN12165 CW617NStrainer EN12165 CW617NStrainer cap EN12165 CW617NBody packing GREY FIBERInner valve CW617NInner valve CW617NValve face RED RUBBERRing CW617N
8274A 95
Bonnet EN12165 CW617NO-ring HNBRSteel strainer STAINLESS STEELBody Packing NA1100Body Bronze EN1982 CC491K
Flanged body Bronze EN1982 CC491KBonnet EN12165 CW617NStem EN12164 CW617NPacking PTFEDisc Nut EN12164 CW617NBody Packing NA 1100Disc holder EN12164 CW617NStem packing PTFEGland EN12164 CW617NGland nut EN12164 CW617NHandwheel EN AB46100Self locking nut Steel
Cimberio Industrial valves49
TYPE P
TYPE M
TYPE R
WHEN PLACING AN ORDER, PLEASE STATE MANIFOLD CODE + ADAPTOR CODE : CIM 582 + P1
MANIFOLDS MATCH TO ADAPTORS ADAPTORS see page No. 95
from P1 to P19DN 3/4 - 1” from M1 to M7
from R1 to R5DN 1 1/4” from M8 to M9
MANIFOLDS WITH INTERCHANGEABLE FITTING FOR FAR ADAPTERS COPPER - PLASTIC - MULTI-LAYER - PIPE - 3 BRANCHES
MANIFOLDS WITH INTERCHANGEABLE FITTING FOR FAR ADAPTERSCOPPER - PLASTIC - MULTI-LAYER - PIPE - 2 BRANCHES580
DN
Cart.
3/4
25
1”
25
1 1/4”
25
582DN
Cart.
3/4
25
1”
25
1 1/4”
25
MANIFOLDS WITH INTERCHANGEABLE FITTING FOR FAR ADAPTERS COPPER - PLASTIC - MULTI-LAYER - PIPE - 4 BRANCHES584
581
583
585DN
Cart.
3/4
25
1”
25
1 1/4”
25
Chromed modular manifolds 2-3-4 branches with manual regulation supplied with handwheel, BLUE-RED double faced disc and disc withdescriptions for sanitary or heating installations. Interchangeable fitting for copper, plastic and multilayer pipes.INLET: 3/4 - 1” male-female gas - Distance between branches centres: mm.45.
Indice ☞
Thanks to their smalldimension, the pressure
reducer CIM 1020 and CIM1060 are suitable to be
installed in sanitary systemsfor sole end-users, loading
boiler installations, hydraulicsystems for special
machineries with directloading from the water
networks.
Cimberio made in Italy 50
1420 BRASS PRESSURE REDUCER MALE/MALE UNIONSMAXIMUM UPSTREAM PRESSURE: 25 BAR - DOWNSTREAM REDUCED PRESSURE: FROM 0,5 UP TO 6 BAR
DN
Box
Cart.
1/2
1
25
3/4
1
20
1”
1
10
1 1/4”
1
1
1 1/2”
1
1
2”
1
1
1460 BRASS PRESSURE REDUCER FEMALE/FEMALE UNIONSMAXIMUM UPSTREAM PRESSURE: 25 BAR - DOWNSTREAM REDUCED PRESSURE: FROM 0,5 UP TO 6 BAR
DN
Box
Cart.
1/2
1
20
3/4
1
10
1”
1
10
1 1/4”
1
1
1 1/2”
1
1
2”
1
1
1430 BRASS PRESSURE REDUCER FEMALE/FEMALE ENDSMAXIMUM UPSTREAM PRESSURE: 25 BAR - DOWNSTREAM REDUCED PRESSURE: FROM 0,5 UP TO 6 BAR
DN
Box
1/2
1
3/4
1
1”
1
1 1/4”
1
1 1/2”
1
2”
1
2 1/2”
1
3”
1
4”
1
1020 1060DN
Box / Cart.
3/8
1 / 50
1/2
1 / 50
3/4
1 / 50
DN
Box
Cart.
1/2
1
20
1110The automatic filling units series CIM 1110
are suitable to water supply in the closed circuitheating plants; it is a pressure reducer with stop
cock and non return device which provides tostabilize the whole heating circuit and, whennecessary, reloads water in the installation.
Once the requested pressure is reached,the filling unit closes automatically.
BRASS PRESSURE REDUCER “MINI” - MAXIMUM UPSTREAM PRESSURE: 15 BARDOWNSTREAM REDUCED PRESSURE: FROM 1 UP TO 4 BAR
FILLING UNITMAXIMUM UPSTREAM PRESSURE: 16 BAR - DOWNSTREAM REDUCED PRESSURE: FROM 0,5 UP TO 4 BAR
Indice☞
Cimberio Industrial valves51
Pressure reducer
Upstream maximum pressure: 25 bar
Downstream reduced pressure: from 0,5 until 6 bar
Max. working temperature: 80°C
Threads: ISO 228/1
Tested according to: DIN EN 1567
Use: Water - Compressed air
Guaranteed reduction ratioSeries Cim 1430: 10:1 - Series Cim 1020: 5:1
Body material: EN 12165 - CW617N
Other comp. material: EN 12164 - CW617N
Tightening seat Stainless steel AISI 303
O-rings: NBR 70 sh
Joints: Fasit Italy
Plastic parts: Acetalic resin
FEATURES
FLOW AND PRESSURE DROP
MATERIALS
DN
3/8
1/2
3/4
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
H
–
120
150
160
220
220
250
260
285
310
L
–
75
85
89
125
130
138
145
177
190
L/min.
–
20-50
50-75
75-95
95-130
110-140
120-160
140-180
160-220
200-260
m3/h
–
1,2-3
3-4,5
4,5-6
6-8
7-8,5
7,5-10
8,5-11
10-13,2
12-15,6
H
93
93
93
–
–
–
–
–
–
–
L
60
60
60
–
–
–
–
–
–
–
L/min.
8-12
10-14
12-16
–
–
–
–
–
–
–
m3/h
0,5-0,7
0,6-0,8
0,7-0,8
–
–
–
–
–
–
–
Cim 1430 Cim 1020 - Cim 1060
Service recommendations:Cimberio pressure reducers are suitable to reduce and control pressure in installations having the following features:
Indice ☞
Cimberio made in Italy 52
Pressure reducer
How to adjust pressure:All Cimberio pressure reducers are tested before being packaged; during test they are pre-set at outlet pressure of 3bar; the outlet pressure can be modified easily when the pressure reducer is connected to the plant. To modify outletpressure you simply need to loose the fixing ring and turn the spring holder as shown in the pictures here below; clock-wise turn increases outlet pressure, anti-clockwise turn reduces outlet pressure. A right setting should be made whenthe system is closed.
An installation fixed according the above scheme avoids almost completely all problems which may occur in a modernwater system.
Scheme for pressure reducers installation:
1. Ball valve
2. Strainer
3. Pressure Reducing valve
4. Stopshock
5. Check valve
6. Ball valve
7. Expansion vessel
8. Water heater
1 2 3
7
8
64 5
Indice☞
