Upload
others
View
14
Download
0
Embed Size (px)
Citation preview
BALCONY Configuration Report
The UK’s No.1 Fully Compliant Aluminium Fire Resistant Balcony Component Solution
Aluminium Decking Modular Balustrade Systems Balcony Paving System
Tel: 01622 235 672Email: [email protected] Aluminium Decking Modular Balustrade Systems Balcony Paving System
BALCONY CONFIGURATION REPORT
Your Balcony
Tel: 01622 235 672Email: [email protected] Aluminium Decking Modular Balustrade Systems Balcony Paving System
Your Balcony Configuration ReportThank you for designing your balcony with the AliDeck Balcony Configurator.
A summary of your balcony specification, product datasheets, and links to relevant DWG files
and NBS Source listings follows. To discuss your configuration or to request a quote, please
call the AliDeck team on 01622 235 672 or email [email protected].
Please note that all balcony designs are subject to approval by the AliDeck design team who will
check all parameters and selections before preparing a quote and will advise if adjustments are
required.
Summary of Balcony Specification
Dimensions of balcony Rectangle 3000 (width) x 1500 (projection) x 300 (depth)
Decking Specified Flat Board (20mm)
RAL Colour Anthracite Grey (RAL 7016)
Drainage Specified Positive Drainage to RWP at the rear
Balustrades Specified Post & Rail
RAL Colour 7016
Cladding Specified Soffit Cladding not required
RAL Colour 7016
DWG Files
Decking: Download Drainage: Download
Balustrades: Download Cladding: Download
Paving: Download
NBS Source Links
Full System: NBS Source
Specification Datasheet
STAINLESS STEEL MACHINE SCREWS
END COVER PLATE
TOP FIX IN COVER
JUNIOR BALCONY FLAT BOARD
AliDeck
Specifically designed for installation on balconies, the AliDeck Junior Balcony Flat board has been designed with 5 main features in mind.
Aluminium Decking
Rochester Airport Trading Estate27 Laker RoadRochesterKent ME1 3QX
Tel: 01622 235 672Email: [email protected]
A1A2fl-s1
FIRE RATED
1 FIRE RESISTANCE
2 DRAINAGE
3 SLIP RESISTANCE
4 INSTALLATION
5 AESTHETICS
The boards are manufactured completely from aluminium and are therefore fire resistant and non-combustible to A1 and A2fl-s1.
They can also be spaced to allow for varying drainage requirements (unlike any other system).
Speed and ease of installation are key to any project, so we have designed a board that has a unique invisible (structural) top clip system which can be installed from the top down. The board can also be trimmed down the length to match any projection of balcony and still be structurally stable across the whole plank.
Aesthetics are key to a great finish; our boards are designed to look like decking but not to feel like aluminium.
Please Note: The test is conducted 8 times, with the first three tests being ‘warm up tests’ the data then starts to be recorded upon the 4th test. The average is taken from the 5 tests and is shown in the column marked MEAN.
The directions are; Length, Width & Diagonal. Each direction has a score depending on wet and dry conditions. Direction A is length, direction B is width, and direction C is diagonal. The tests were carried out in accordance with BS7976 part 2. The full test report is available for download from our website.
Pendulum Test Values (PTVs) - Low Slip Potential 35+ | Moderate Slip Potential 25-35 | High Slip Potential 0-25
DIRECTION CONDITION 1 2 3 4 5 MEAN PREV RISK
A Dry 70 68 67 67 67 67 67 66 67 0 LowA Wet 44 41 39 39 39 38 38 38 38 0 LowB Dry 65 64 64 64 64 64 63 62 63 0 LowB Wet 44 44 39 38 38 38 38 38 38 0 LowC Dry 66 65 64 64 64 63 62 62 63 0 LowC Wet 50 47 45 45 45 44 44 44 44 0 Low
Dimensions
Construction
Maintenance
Warranty
120mm
20mm
The AliDeck Aluminium decking boards are 50% quicker to install compared to other decking systems on the market. These boards are fixed from the top down so required no fancy, fiddly fixings. It can also span 600mm between joists on a 4KN loading. Specific loading specifications are available on request. Full installation videos and installation guides are available on www.alideck.co.uk.
The boards are constructed completely from 100% aluminium (6063 T6 grade), up to 30% of which has been recycled to make these boards eco-friendly and much better for the environment.
Due to the fact that AliDeck is aluminium and finished using the 5 stage Qualicoat system, little or no maintenance is required. General grime can be removed simply with a damp, lint free cloth or mop with warm soapy water.
The decking is supplied with a 30 year warranty against splitting, cracking, warping, splintering, rotting, twisting and material or manufacturing defects. It has a minimum 60 year life expectancy.
INDIVIDUAL BOARDS:Length: 4 & 6 metresWidth: 120mmDepth: 20mm
The boards can be cut to size along both the length and width
Maximum Overall Decking Area: UnlimitedAllowable Span: 600mm on 4kN load
Colour Options
AliDeck Boards and Joists are available in our full range of standard colours. Please refer to our Standard Colour Range datasheet for colour options (available at www.alideck.co.uk/downloads).
Non-standard colours are available on request as special orders, but may affect cost and lead-time. The Boards and Joists can be supplied non-coated/mill finish to achieve A1 fire rating.
Installation
Protective Finish
• Fire resistant: A1 and A2fl-s1 when coated• Slip resistance in the dry – see table overleaf• Slip resistant in the wet – see table overleaf• The weight of the standard balcony board including the clip in cover is 1.58 kg per linear M• Coating thickness - 60-80 microns • Impact test - with an energy of 2.5Km to ensure that the coating adheres to the substrate to EN ISO 6272 / ASTM D2794• Bend test - on 5mm mandrel to ensure adhesion after bending to EN ISO 1519• Machu Test (accelerated corrosion test) - in a solution made up of sodium chloride acetic acid and hydrogen peroxide at 37degreees C Duration 48 hours• Qualicoat 2.4.1. - cross hatch cuts are made at 2mm spacings with one being at 90 degrees to the other cut, tape is the applied left for 2 minutes and removed to check for adhesion of paint (EN ISO 2409 2013) • Qualicoat 2.18 - sawing and drilling test to ensure no flaking after cutting (using sharp tools) • Acid salt spray test - ISO 9227• EN ISO 3231 - Resistance to humid atmospheres containing Sulphur Dioxide• EN ISO 11341 - Accelerated weathering test• EN ISO 20810 - Natural weathering test (Florida Test) (Carried out on Powder Type)• EN ISO 12206-1 - Resistance to mortar (Carried out on powder type)• EN ISO 6270 – 2 - Constant climate condensation water test.• Choice of colour - Available in two colours; Textured Silver Grey & Textured Sand as shown opposite. Other colours are available on request.
The planks are coloured using the Qualicoat powder coating finish. Qualicoat is a quality label organisation committed to maintaining and promoting the quality of coating on aluminium and its alloys for architectural applications.
ALL ALUMINIUM
HEAT RESISTANT
DURABLETEXTURED FINISH
LOWMAINTENANCE
RECYCLABLE STABLE IN ALL WEATHER
CONDITIONS
A1 & A2fl-s1 FIRE RATED
ProductSpecification
Aluminium Decking
Rochester Airport Trading Estate27 Laker RoadRochesterKent ME1 3QX
Tel: 01622 235 672Email: [email protected]
BALCONY BOARD
DRAINAGE CHANNEL
Specification DatasheetBALCONY
DRAINAGE SYSTEM
AliDeck
Specifically designed to aid in drainage from the top surface of balconies, decking platforms and walkways.
This discrete extrusion is installed between the balcony boards to aid with drainage and reduce the flow of water between the boards, available for the 20mm & 30mm balcony boards, it may reduce the need for expensive soffit claddings on balconies.
Aluminium Decking
Rochester Airport Trading Estate27 Laker RoadRochesterKent ME1 3QX
Tel: 01622 235 672Email: [email protected]
A2-s1, d0A2fl-s1
FIRE RATED
DRAINAGE GUTTERING
Dimensions
Construction
Maintenance
Biological/Chemical
Warranty
32mm32mm
80mm 80mm
18mm28mm
60mm 50mm
The Drainage Channel is constructed completely from 100% aluminium (6063 T6 grade), up to 30% of which has been recycled to make it eco-friendly and much better for the environment.
Due to the fact that Ali-Deck is aluminium and finished using the 5 stage Qualicoat system, little or no maintenance is required.
Resistant to moulds, algae, alkali, bitumen.
Drainage Channels are supplied with a 30 year warranty against splitting, cracking, warping, splintering, rotting, twisting and material or manufacturing defects. It has a minimum 60 year life expectancy.
INDIVIDUAL BOARDS:Length: 6 metresWidth: 32mmDepth: 18mm (20mm drain) 28mm (30mm drain)
The Drain Channels can easily be cut to length using a chop saw
Balcony Drainage Section
Balcony Gutter Section
Colour Options
AliDeck Boards and Joists are available in our full range of standard colours. Please refer to our Standard Colour Range datasheet for colour options (available at www.alideck.co.uk/downloads).
Non-standard colours are available on request as special orders, but may affect cost and lead-time. The Boards and Joists can be supplied non-coated/mill finish to achieve A1 fire rating.
Protective Finish
• Fire resistant: A2-s1, d0 and A2fl-s1 when coated• The weight of the 20mm channel is 0.309 KG and the 30mm channel is 0.392KG per Linear M• Coating thickness - 60-80 microns • Impact test - with an energy of 2.5Km to ensure that the coating adheres to the substrate to EN ISO 6272 / ASTM D2794• Bend test - on 5mm mandrel to ensure adhesion after bending to EN ISO 1519• Machu Test (accelerated corrosion test) - in a solution made up of sodium chloride acetic acid and hydrogen peroxide at 37degreees C Duration 48 hours• Qualicoat 2.4.1. - cross hatch cuts are made at 2mm spacings with one being at 90 degrees to the other cut, tape is the applied left for 2 minutes and removed to check for adhesion of paint (EN ISO 2409 2013) • Qualicoat 2.18 - sawing and drilling test to ensure no flaking after cutting (using sharp tools) • Acid salt spray test - ISO 9227• EN ISO 3231 - Resistance to humid atmospheres containing Sulphur Dioxide• EN ISO 11341 - Accelerated weathering test• EN ISO 20810 - Natural weathering test (Florida Test) (Carried out on Powder Type)• EN ISO 12206-1 - Resistance to mortar (Carried out on powder type)• EN ISO 6270 – 2 - Constant climate condensation water test.• Choice of colour - Available in two colours; Textured Silver Grey & Textured Sand as shown opposite. Other colours are available on request.
The Channels are coloured using the Qualicoat powder coating finish. Qualicoat is a quality label organisation committed to maintaining and promoting the quality of coating on aluminium and its alloys for architectural applications.
ALL ALUMINIUM
HEAT RESISTANT
DURABLETEXTURED FINISH
LOWMAINTENANCE
RECYCLABLE STABLE IN ALL WEATHER
CONDITIONS
A2-s1, d0 & A2fl-s1 FIRE RATED
ProductSpecification
Aluminium Decking
Rochester Airport Trading Estate27 Laker RoadRochesterKent ME1 3QX
Tel: 01622 235 672Email: [email protected]
ALIRAIL SYSTEMAliRail Aluminium Balustrade System with 10mm glass infill panels.
A comprehensive balustrade system with configurable glass infill options available in any standard RAL Colour with LED lighting options.
Compatible with all AliDeck decking, AliDeck Drainage, AliDeck Joist Systems and all AliClad Systems.
with Glass Infills
Specification Datasheet
Modular Balustrade Systems
Unit 27 Laker RoadRochester Airport Industrial EstateRochesterKent ME1 3QX
Tel: 01622 235 672Email: [email protected]
• Glass Thickness: 10mm Toughened • Glass types: self-cleaning, clear, tinted or etched • Manufactured from Structural grade 6063 T6 aluminium• Warranty 30 Years• Life Expectancy 60 years. • Loading capabilities: 1.5 kN/m• Post dimensions 80mm x 80mm• LED Lighting options into the handrail• Fire Rating to A2-s1, d0 when coated
Benefits include:A2-s1, d0
FIRE RATED
Construction
Maintenance
Warranty
The AliRail system is designed for easy installation. Full installation guides are available on www.alideck.co.uk.
AliRail is constructed completely from 100% aluminium (6063 T6 grade), up to 30% of which has been recycled to make this system eco-friendly and much better for the environment.
Due to the fact that AliRail is aluminium and finished using the 5 stage Qualicoat system, little or no maintenance is required. General grime can be removed simply with a damp, lint free cloth or mop with warm soapy water.
AliRail is supplied with a 30 year warranty against splitting, cracking, warping, splintering, rotting, twisting and material or manufacturing defects. It has a minimum 60 year life expectancy.
Colour Options
AliRail is available in our full range of standard colours. Please refer to our Standard Colour Range datasheet for colour options (available at www.alideck.co.uk/downloads).
Non-standard colours are available on request as special orders, but may affect cost and lead-time. AliRail can be supplied non-coated/mill finish to achieve A1 fire rating.
Installation
Protective Finish
• Fire resistant: A2-s1, d0 when coated• Coating thickness - 60-80 microns • Impact test - with an energy of 2.5Km to ensure that the coating adheres to the substrate to EN ISO 6272 / ASTM D2794• Bend test - on 5mm mandrel to ensure adhesion after bending to EN ISO 1519• Machu Test (accelerated corrosion test) - in a solution made up of sodium chloride acetic acid and hydrogen peroxide at 37degreees C Duration 48 hours• Qualicoat 2.4.1. - cross hatch cuts are made at 2mm spacings with one being at 90 degrees to the other cut, tape is the applied left for 2 minutes and removed to check for adhesion of paint (EN ISO 2409 2013) • Qualicoat 2.18 - sawing and drilling test to ensure no flaking after cutting (using sharp tools) • Acid salt spray test - ISO 9227• EN ISO 3231 - Resistance to humid atmospheres containing Sulphur Dioxide• EN ISO 11341 - Accelerated weathering test• EN ISO 20810 - Natural weathering test (Florida Test) (Carried out on Powder Type)• EN ISO 12206-1 - Resistance to mortar (Carried out on powder type)• EN ISO 6270 – 2 - Constant climate condensation water test.• Choice of colour - shown opposite. Other colours are available on request.
The planks are coloured using the Qualicoat powder coating finish. Qualicoat is a quality label organisation committed to maintaining and promoting the quality of coating on aluminium and its alloys for architectural applications.
ALL ALUMINIUM
HEAT RESISTANT
DURABLETEXTURED FINISH
LOWMAINTENANCE
RECYCLABLE STABLE IN ALL WEATHER
CONDITIONS
A2-s1, d0FIRE RATED
ProductSpecification
Unit 27 Laker RoadRochester Airport Industrial EstateRochesterKent ME1 3QX
Tel: 01622 235 672Email: [email protected]
Modular Balustrade Systems