Upload
hadang
View
216
Download
2
Embed Size (px)
Citation preview
1
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.a) The Tenderer shall furnish copies of :
i) IT Registration Certificate with No.
ii) Sales Tax Registration Certificate with No.
iii) Service Tax Registration Certificate with No.
iv) Electrical Contractor's License with No.
v) Electrical Supervisor’s License with No.
5.
a)
b)
c)
d)
e)
1.
2.
(Government of India Undertaking)
NOTICE INVITING TENDER
Interested agencies having experience in work of similar nature & magnitude and fulfilling the eligibility criteria given
below may download detailed tender document from Bank's Website http:bankofbaroda.com/tenders.asp
marked Annexure - IV
The tenderer should have completed in last three Financial years (i.e. current year & two previous financial year) in
Bank, Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc. minimum 3 (three) similar
composite work (Interior Furnishing & Electrical) costing not less than Rs. 11.00 lacs in single contract. (Work order &
completion Report in support must be submitted & marked as Annexure-I)
The total contract amount received by the Tenderer during the last 3 financial years should be minimum as 40.00 lacs
per year in contract work. In support of this the Tenderer should submit audited sheet duly Certified by the Chartered
Accountant & marked Annexure-II.
The Tenderer should produce Solvency Certificate from any Nationalised / Scheduled Bank for an amount of 200% of
the advertised Tender value marked Annexure-III.
Part 'A' envelope (Technical Bid) shall contain : Earnest Money, the documents for satisfying eligibility criteria & the
technical & financial stipulation, if any, of the tenderer & Part 'B' shall contain : financial bid along with a copy of the
tender document, duly signed in all pages both shall be separately sealed & submitted in another sealed envelope
to the Deputy General Manager, Bank of Baroda, West Bengal, Sikkim & A & N Island, BARODA TOWER, Plot No. 38/2,
Block GN, Sector-V, Salt Lake City, Kolkata : 700 091, before 2.30 P.M. on 24.08.2012 along with Earnest money
amounting to Rs. 11,000/- by Bank Draft / Pay order in favour of Bank of Baroda shall be submitted in Part 'A'.
MINIMUM ELIGIBILITY CRITERIA (Shall be submitted with Part A of the Offer)
Part 'A' will be opened at 3.30 p.m. on 24.08.2012.
Bank of Baroda, West Bengal, Sikkim & A & N Island invites sealed tenders in two bid system for the proposed interior
& electrical work of Asansol Branch, Uma Bhawan 361 G.T Road Asansol Dt Burdwan, West Bengal-713301. The work
is to be completed within 2(Two) weeks.
List of important plant & machinery available on hand (own) and proposed to be inducted (own & hired to be given
separately) for carpentry & electrical work (marked Annexure-X)
List of works completed in the last (three) financial years under Bank / Govt., Semi - Govt,Govt. undertaking /
Corporate Sectors giving description of work, organisation for whom executed, approximate value of contract at the
time of award, date of award and date of scheduled completion of work, date of actual completion and final value
of contract should also be given (marked Annexure-XI)
marked Annexure - V
Bank of Baroda
List of works in hand indicating description of work, contract value, approximate value of balance work yet to be
done and date of award (marked Annexure-XII)
Contractors will be required to arrange for their own storing. Dismantled materials are to be carted away from site at
their own cost and disposed of in conformity with Municipal regulations.
Tenderer who will quote the rate must have a local office at Kolkata. This is absolutely essential for day to day
supervision & coordination of the work at site.
All informations are to be fully authenticated & documented failing which the documents submitted will not be accepted.
GENERAL TERMS & CONDITIONS
The tenderer are to visit the site and acquaint themselves with site conditions before quoting rates.
Part 'B' of the tenders will be opened for those only who fulfils the qualifying criteria given in the tender document.
The unopened part 'B' along with Earnest Money deposit for those not fulfilling qualifying criteria will be returned.
Clarifications, if any, required on drawings, schedules, specifications, etc. can be obtained from our Consultant M/s.
A B Consultant, CJ-276, Sector II, Salt Lake City, Kolkata - 700091,
Phone No - 9903900971
The Tenderer should also submit the following documents along with the Tender.
List of technical persons available on hand, years of their association with the firm & proposed to be engaged for the
subject work, if selected (marked Annexure-IX) ;
The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders
without assgming any reason whatsoever.
marked Annexure - VI
marked Annexure - VII
marked Annexure - VIII
1
3.
4.
5.
6.
7
8.
9.
10.
11.
Payments will be made once on completion by the Employer within 15 days after certification of bill by the
Consultant 10% of the total payable amount is to be retained as retention money and will become due for release
after expiry of six months from the date of completion of the installation & subject to satisfactory maintenance of the
executed work.
Tenders addressed to Asst. General Manager, Bank of Baroda, West Bengal & Sikkim Region and submitted at his
office at BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt lake City, Kolkata : 700 091, before 2.30 P.M. on
24.08.2012, accompanied by Earnest Money amounting to Rs.11,000/- by Bank draft payable to Bank of Baroda and
other documents as mentioned in NIT. Part 'A' of the tenders will be opened at 3.30 P.M. on the same date.Part 'B' will
be opened immediately after opening of Part 'A'.
The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders
without assgming any reason whatsoever.
The arrangement for “ Wire Management " is to have prior approval of the Client.
The quoted rates shall remain firm during the entire currency of contract. No price variation for any causes
whatsoever, shall be entertained.
The time of completion shall be two (2) weeks from the date of placement of order.
The offer shall remain valid for acceptance for a period of 30 days from the date of submission of offer.
The quoted rates, are to include cost of all materials, labour and or any other material, all statutory taxes, transport,
handling delivery at site and installation, complete in all respect, as per drawing, directions or instructions of
Employer/Consultant. The quoted rates are also to include dismantling of partitions, counters, old electrical wirings
etc. and stacking serviceable materials and disposal of debris, etc.
Prior approval of the Employer/ Consultant shall be obtained for colour and thickness of laminates to be used in the
work.
2
SPECIFICATION OF MATERIALS FOR INTERIOR WORK
Sl.No. Description
1. Laminate
2. Ply & Block Board
3. Glass
4. False Ceiling & Accessories
5. Veneer
6.Textured Wall Paint
7. Glue
8. Locks
9. Aluminium Hardware Fittings
10. Brass Hardware
11.
Floor Spring
12. Screws
13. Casters
14. Sliding Drawers / Channels
15. Furnishing Fabric
16. Leather Foam
17. PVC Flooring
18. Carpet
Efficient Gadjets
Evrite Agencies Pvt. Ltd. / Nita Floor Spring
Nettle Fold
ICI, Spectrum, Heritage
Godrej / Secur / Yale
Brass Arts / Vijoy
Glamour or Favourite (Balla Industries)
Woven type "Harmony" range from "Vimal"
or equivalent
Bhor Industries or equivalent
Armstrong / Krishna / Premier
Durian / Century / Archid
ICI, Jenson & Nicholson / Asian paint /
Berger
Make (s)
Metako / Allen / Crown with ISI Mark
India Gypsum Ltd.
Marino / Greenlam / Century / Archid
Green / Century / Archid / Austin
Modi / Indo Ashahi / Float Glass India Ltd.
Earl Behari / Efficient Gadjets
3
SPECIFICATIONS OF MATERIALS FOR ELECTRICAL WORK
Sl.No. Description
1. Switch fuse / fuse switch units (HRC) (32A TPN & above)
2. Timer (TSQ 100)
3. Voltmeter & Ammeter
4. Voltmeter & Ammeter selector switches
5. Phase indicating lamp
6.
7. Capacitor
8. HRC fuses
9. Power Cable : XLPE
10.
11. HRC fuse base & carriers.
12. PVC terminals
13. 1.1 KV grade PVC insulated armoured aluminium cable (ISI marked)
14. 1.1KV 660V grade PVC insulated & sheathed / insulated copper wire &
flexible cords (ISI marked).
15. Moulded case circuit breaker
16. RCCB / ELCB
17. Switch fuse with rewirable fuses. (6A & 32A TPN)
18. Isolator
19. Changeover switch (on load type)
20. MCB distribution board
21. Distribution fuse board with rewireable fuses
22. Miniature circuit breaker / MCB type isolator
23. Contractors
24. Auxiliary contractor
25. 1/16 Amp Piano key type switch / flushed type plug socket
26. 6/16 Amp modular switch / socket, module plate & mounting M.S. /
PVC box.
27. 300W, 2 module electronic regulator
KENBAR / HAVELLL’S / ELCON / HPL /
CONTROL & SWITCHGEAR.
LEGRAND/ SIEMENS
A E / KAPPA SEGC & CONTROLS / CONTROL
CROMPTON/SIEMENS
TATA LEVERT/NEUMERIC/ KIRLOSKAR
GLOSTER/INCAB/POLYCAB/CINOLEX
GE power / SIEMENS / L & T / SCHNEIDER
SWITCHGEAR
GE Power/SIEMENS/L&T/SCHNEIDEV
HAVELL’S / BPC / BOSMA
UNIVERSAL / GLOSTER / NATIONAL / NICCO
/
L & T / SCHNEIDER/LEGRAND
CPL (Genius) / ANCHOR (Roma) / CRABTREE
/
MK
ANCHOR (Roma) / CRABTREE / MK
ANCHOR / PRECISION / SSK & RIDER
HAVELL’S / STANDARD
NATIONAL/FINOLEX/ HAVELLS
LEGRAND / SIEMENS
SIEMENS / L & T/BCH
SIEMENS / L & T
KAYCEE / L & T
LEGRAND/ SIEMENS / L&T
Make (s)
HAVELL’S / STANDARD
Vaishno / SIEMENS / ROSS controls
L & T
GE power / SIEMENS / L&T / Schneider
A. E. / IMP
ELMEX / ESSEN
4
Sl.No. Description
28. Ceiling rose
29. Holder
31. Luminous indicating type buzzer with cancellation push.
32. Alarm bell.
33. G.I. pipe
34. Steel conduits (conforming to IS in all respects)
35. Black enamelled
36. Galvanised
37. Non-metallic PVC conduit pipe
38. Compression type brass gland
39. Cable termination socket
40. Light fitting & lamps
41. Decorative/Ornamental /Chandelier / Light Fittings
42. Ceiling Fan
43. Exhaust fan
44. Industrial type socket & top
45. Telephone wire
46. Telephone Socket
47. Network Cable
48. Contractors
49. STARTERS
FINOLEX or equivalent
L & T / SIEMENS
CROMPTON / POLAR / KHAITAN
NORTH WEST / CABTREE
CROMPTON / POLAR / KHAITAN
HAVELL’S / CROMPTON / LEGRAND
FINOLEX / RRK/NATIONAL
CRABTREE/MK
CROMPTON / POLAR / KHAITAN / EPC
DOWELL'S
WIPRO or equivalent
DOWELLS / JOHNSON / COMET
PLAZA / KALINGA/ PRECISION/AKG or
equivalent
KHERAJ / GETCO
KAY / EPP / ANCHOR / JJ
NATIONAL / HOMA / EQUIVALENT
Good local make with minimum wall
thickness of 3 mm. for 19 / 20 mm. and 25mm
sizes & 2.5 mm. for 12mm. sizes
BEC / SUPREME / AKG
BEC / SUPREME / AKG
BST / BANSAL
KAY / EPP / ANCHOR / JJ
Make (s)
5
Asansol Branch
Bank of Baroda
Section A : Civil & Furnishing Work
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
1 GYPSUM CEILING : Providing and fixing 12.5mm thick
Gypboard conforming to IS 2095-1982 on metal frame suspended
from RCC roof having following sizes:
Intermediate channel – 45 x 0.9 x 15mm to be placed at 1220mm
c/c.
Ceiling angle – 25 x 10 x 0.55mm to be hung from the RCC roof
with rawl plug and clip to be placed at 1220mm c/c.
Ceiling Section – 0.55mm x 51.5mm x 26mm x 10.5mm lipping
to be fixed with the intermediate channel with the help of
connecting clip placed at 457mm c/c. Jointing and finishing to be
done as per manufacturers guidelines.
Rate shall be inclusive of any vertical ceiling part, spot, tube light,
fans, AC grills, fire and security systems cutouts with framing,
and finishing with necessary jointing compound, paper tape.
140 Sq.m
2 GRID TYPE CEILING : Providing & fixing 6 mm thk. falce ceiling
supported by hot dipped galvanised zinc coated members as
followes. Main Runner :- G.I. Channel 0.4 mm thick .
Weight 0.369 kgs / mtr @ 1.2 mtrs c/c.
Primary cross runner :- G.I. Channel 0.4 mm thick . Weight
0.325 kgs / mtr @ 600 mm c/c. Secondary
runner :- G.I. Channel 0.4 mm thick . Weight 0.325 kgs / mtr
placed at the centre of the primary runners.
G.I. Wall Angles :- 0.35 mm thick weight : 0.23 kgs / mtrs.
including masonary work , accessories , screws etc.
30 Sq.m
CIVIL, FURNISHING SANITARY PLUMBING, ELECTRICAL FOR ASANSOL BRANCH OF BANK OF BORODA
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
3 FULL HEIGHT PARTLY GLAZED PARTITION (Partition Type
– 2 as marked in the drawing ): Providing and fixing partition
framing upto ceiling level. Framing shall consist of 50 x 50 mm
wood member, at 600 c/c bothways horizontally and vertically.
Above false ceiling alternate vertical sections to extend upto main
ceiling and to be fixed with MS cleats. Framing to be covered on
both sides with 6mm thick BWP ply finished with 1mm thick
laminate, necessary groove work, beadings, moulding and 75 x
12 mm t.w. skirting duly polished. Upto a height of 900 mm from
FFL and from 2100 mm upto the false ceiling, the partition should
be made solid / fully blocked; from 900 mm to 2100 mm clear
glass of 8 mm thickness etched as per direction of the Consultant
fixed with t.w. moulding of 19 x 35. The item is to be finished
complete in all respects. (Tenderer should visit the site and check
the actual floor height – Partition to be measured upto false
ceiling height excluding door opening for Billing purpose).
20 Sq.m
4 LOW HEIGHT PARTLY GLAZED PARTITION (Partition Type
– 3 as marked in the drawing ) : Providing and fixing partition
framing upto total height of 1500 mm. Framing shall consist of 50
x 50 mm wood member, at 600mm c/c bothways horizontally and
vertically. Framing to be covered on both sides with 6mm thick
BWP ply finished with 1mm thick laminate upto 1050 mm height,
necessary groove work, beadings, moulding and 75 x 12 mm t.w.
skirting duly polished and above 900 mm level, glazed by 8mm
thick 300mm high glass etched as per approved design upto 450
mm height. The item is to be finished in all respects. (Partition to
be measured excluding door opening for Billing purpose).
26 Sq.m
5 MAIN ENTRANCE DOOR : Providing and fixing fully glazed
Aluminium framed door with approved colour powder coated
sections with 101 x 45 x 2.5mm thck alumnium section for top,
bootom and middle rail and 50 x 45 x 2.5 mm thick sections for
vertical styles and Door frame with 101 x 45 x 2.5 alumnium
sections. Glazing with 8mm thick clear glass complete with heavy
duty floor spring of approved make and handle complete.
a) For Banking Hall 3 Sq.m
6 FLUSH DOOR : Providing and fixing in position 35 mm solid
core flush door finished with 1mm thick laminate as per design on
both sides duly polished, t.w. lipping on two vertical and horizontal
edges having cylindrical lock, door stopper, brass hinges, etc.
Also providing 75 x 62.5mm second class t.w. frame having t.w.
lipping fixed in either surface of the frame duly polished with 3
coats of lacquer melamine and fixed to the partition frame.
4 Sq.m
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
7 PARTLY GLAZED DOOR : Providing and fixing in position 25
mm solid core panel door finished with 1mm thick laminate on
both sides upto 1050 mm height, t.w. lipping on two vertical and
horizontal edges, cylindrical door lock, door stopper, etc., 75 x
62.5mm second class t.w. frame with t.w. lipping, 8 mm thick
glass with necessary etching and / or frosting to be provided as
per design / directions, fixed with wooden mouldings from both
sides. All exposed woodwork to be melamine polished. The
work should be finished as per specification, design and
completed in all respects.
6 Sq.m
8 STORAGE UNIT : Providing and placing in position Storage units
fabricated out of 19mm thick BWP block board on all sides,
backing and separators will be of 6mm thick BWP ply, shelves
and shutters will be of 19mm thick BWP solid ply. The top, sides,
shutter front and back sides (if exposed) to be finished with 1mm
thick laminate with necessary grooves and the exposed edges of
block board should be finished with 6mm t.w. lipping. Inside of
the unit will be polished in matching tone. Unit should be
provided with locks, hinges, sliding drawer channels, handles, ball
catchers and tower bolt fixed. There should also be a 75 x 12
mm t.w. skirting with grooves as per design polished in matching
tone.
15 Sq.m
9 WRITING LEDGE : Supply, fitting and fixing 19mm thick granite
slab at a height of 1050mm from FFL with machine polished
moulded edges (950 x 300mm) of approved shade and quality to
portion of wall, including cutting chase in wall and mending good
the damages, the slab supporting itself of 50mm dia stainless
steel pipe inside filled with wooden section of appropriate size
and shape to form writing ledge.
1 no.
10 VERTICAL BLIND – Providing and fixing 100mm wide vertical
Blinds of approved shade of Vista Levolor / Marvel/ Mac make .5 Sq.m
11 VITRIFIED TILES : Providing and fixing premium quality 600 x
600 mm vitrified tiles of approved shade with adhesive / sand
cement mortar. ( For replacement of damaged tile as may be
required ) Basic Price : Rs. 50 per Sq.M
170 Sq.m
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
12 CERAMIC TILES : Providing and fixing 300 x 300 mm
ceramic tiles with rectified edge of approved shade with water
proofing adhesive Joints filled with pigmented white cement to
match with the colour of Ceramic tiles.
30 Sqm.
13 CERAMIC TILES : Providing and fixing 200 x 300 mm ceramic
tiles of approved shade with water proofing adhesive including
filling joints with pigmented white Cement to match the colour of
tiles..
70 Sq.m
14 Rendering the surface of walls and ceiling with Plaster of Paris
(thickness not less than 1.5mm) 20 Sqm
15 PAINTING : Providing and applying 2 coats of plastic emulsion
paint over 1 coat of primer of approved shade and colour on
walls, columns and ceiling. The job is inclusive of scraping,
leveling and preparing the surface, applying primer, etc.
330 Sq.m
16 ENAMEL PAINING : Providing and applying 2 coats of enamel
paint over 1 coat of primer of approved shade as per direction of
the Architect. The job is inclusive of scraping, leveling and
preparing the surface, applying primer, etc.
62 Sq.m
17 Proving 12 mm plaster in walls / ceiling in sand cement mortar
(1:4) including rounding off or chamfering comers as directed
including curing complete as per the direction of the Architect.20 Sq.m
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
18 Fixing Teak Wooden decorative beading 50 mm wide polished as
per direction of the Architect.110 RM
19 Providing & fixing Wall Paneling with 6 mm BWP ply and 1mm
thick laminate of approved shade and colourwith 25 x 25 wooden
framing at 450 mm c/c bothways.
16 Sq.m
TOTAL Rs.
Section B : Sanitary Work
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
1. Providing and fixing PVC pipes in floor including covering the
same with concrete. The item includes all accessories such as
Floor traps, bends, etc. The item includes joining the same to
existing pipes, manhole/ GT outside including making necessary
digging and covering the same later. The item also includes
necessary liasoning with concerned authorities complete to
the satisfaction of architect / employer
1.1 100mm dia pipe 12 Rmtr
1.2 80 dia pipe. 12 Rmtr
1.3 Providing and fixing GI pipes including all accessories such as
bends, elbows etc. The item includes making chases in walls /
floors as the case may be and making them neat later. Item also
includes joining with main water supply as per instruction of
architect / employer 12 mm nominal bore. item includes
connection with existing building pipeline/ tanks.
12 Rmtr
2. WC EUROPEAN : Providing and fixing Parryware Chinaware
water closet (of approved colour) with P / S trap together with
flush valve of approved make having 40mm dia lead pipe
concealed in wall, chasing and making good etc., including solid
plastic seat and cover of approved make & shade having brass
hinges and rubber buffer and connection of anti siphonage all
complete with 10 litre capacity PVC AUTO flushing cistern with CI
brackets including taking out existing pan with traps and flashing
cistern including damaged CI specials if any and removing the
same from the site.
5 nos.
3. Providing and fixing white vitreous china flat back front urinal of
465 x 355 x 265 mm size with automatic flushing cistern of 5 litres
capacity with CI brackets, standard size of GI flush pipe and
spreaders with brass unions and GI clamps complete, including
making good the walls and floors wherever necessary.
2 no.
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
4. WASH BASIN : Providing and fixing Parryware basin size 500 x
400mm basin with pedestal (of approved colour) to wall with
brass cast type bottle trap, waste coupling , 32mm dia waste pipe
and chain plunge complete in all respects
3 nos.
5 Providing and fixing Jaquar make contiental collection Pillar cock,
Stop cock and Bib cock etc with wall flange.
a Pillar cock Cat No. 011 3 nos.
b. Angular Stop Cock Cat No. 051. 12 nos.
c. Bib Cock. Cat No. 035 7 nos.
6 COAT HOOKS : Providing and fixing CP brass coat hooks of
approved make and quality. 7 nos.
7 LIQUID SOAP DISPENSER : Providing and fixing Liquid soap
dispenser with Glass bottle of Jaquar Continental collection
Model No. 1135N.
5 nos.
8 TOWEL RAIL : Providing and fixing CP towel rail 600 mm longof
Jaquar make Model No. 1111.3 nos.
9 MIRROR : Providing and fixing 5 mm thick mirror (I.S. 3438/1965)
in toilets with backing of 12mm BWR ply and edges finsihed with
plished teak wood moulding.
3 Sq.m
10 Supplying fitting and fixing of round shape 50mm dia C.P. waste
grating.9 no.
11 25mm thick marble partition slab with white adanga marble
square cut, polished sides with two front corners rounded and
edges complete.
2 Sq.m
12 Taking out existing toilet fixtures, pipe lines and removal of the
same from the site as per local Municipal rules.1 Job
TOTAL Rs.
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
Section C : Electrical Work
1a. Main Switch : Providing & fixing of 415V 125A TPN SFU
with HRC fuses on angle iron frame on wall concealed.
Including connection from Meter board.1 No.
1b. Providing & fixing of 415V 63A TPN SFU with HRC fuses on
angle iron frame on wall. Including connection from
generator supply.
1 No.
2. Earth Busbar (For Computer System) : Providing &
Fixing earth busbar of 25 x 3 mm copper strip for connection
to UPS and earth station
1 RM
3. EARTH BUSBAR : Providing and fixing earth busbar of
50mm x 6mm G.I. strip on surface for connections etc. as
required.
1 RM
1
4. G. I. EARTH PIPE ELECTRODE : Earthing with G. I. earth
pipe 4.5 M long x40mm dia including accessories, and
providing masonry enclosure with cover plate having locking
arrangement and watering pipe etc. with charcoal or coke
and salt at alternate layer as required complete as required.
2 Sets
5. Earthing station : 600x600x3mm copper plate earthing
station with earthing resistance less than 2 ohms including
watering PVC/GI pipe with funnel ,excavation till7’0”or as
instructed by site-in charge, backfilling with compaction ,1no
25x3mm copper flats connected to the copper plate till the
existing ground level, copper nuts & bolts, salt, and coal filling
in layers 10”x10” masonry chamber with sand plaster ,RCC,
or cast iron lid ,inclusive of 5mtr conduiting of earthing of
copper 10 SWG in Black Enameled MS conduit to start from
the ground level, complete as directed in site manual.
1 No.
6. Supplying and laying G.I. earth strip 25x3 at surface for
connection to equipment & at 0.5 M below ground for
connection from earth electrode to earth busbar including
soldering etc. as required.
40 RM
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
7. CU Earth Wire: Providing & Fixing of 2nos 16sq.m. PVC
insulated copper Wire from earth busbar to UPS & from
earth busbar to earth station.
35 RM
8a. 3.1/2 C PVC/A Al cable : Providing & Laying 3.1/2 C 95
sq.mm PVC/A Al cable along with 2nos 7/10 SWG GI wire
as earth continuity wire.
35 RM
8b. 3.1/2 C PVC/A Al cable : Providing & Laying 3.1/2 C 25
sq.mm PVC/A Al cable along with 2nos 8 SWG GI wire as
earth continuity wire.
35 RM
9a. Cable Termination : End connection of the above 3 1/2 core
95 sq.mm cable by double compression type brass cable
gland crimping type sockets, tapes etc
2 Set
9b. Cable Termination : End connection of the 3.1/2 x 25
sq.mm by double compression type brass cable gland
crimping type sockets, tapes etc
4 Set
10. LT PANEL at Ground Floor :-
Fabricating, assembling, painting, supplying, erecting,
testing, commissioning of Cubicle type LT panel board
fabricated out of 2mm thick CRCA MS sheet with proper
earthing attachment with proper earthing attachment and
provision of bottom /top entry/exit for all cables including
indicating lamps in all phases showing ON/OFF condition.
INCOMING
1NO 415V 125A TPN SFU(MAINS)with HRC fuse
1NO 415V 63A TPN SFU(GEN) with HRC fuse
SFUS are Panel mounting Type
1 NO 4 strip horizontal (extension type)copper busbar
200A capacity for MAINS
1 NO 4 strip horizontal (extension type)copper busbar
100A capacity for GENERATOR
1 NO 4P 415 V on load Change-Over Switch 200A capacity
1No flush square pattern 96mm square 0-500V range AC
voltmeter with phase selector switch of 3 positions and OFF
with HRC fuse links for protection. It should be fitted
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
on the incoming side of 125A SFU
1 NO square pattern 96mm square 0-200A range AC
ammeter with 3 nos CT of ratio 200/5 A and phase selector
switch of 3 positions and OFF. It should be fixed on the out
going side of 125A SFU
OUTGOING
4 NOS 415 V 63A TPN SFU with HRC fuse
The board should be complete with fabrication of all frames,
indicating lamps, danger board, interconnection with PVC
insulated unarmoured single core cable of appropriate sizes.
All cables, conduits, flexible conduits should be neatly laid
and armoured should be finished properly
1 No.
11. TPN DB FOR LIGHTING & COMPUTER : MCB-
Distribution Board - Supplying
and installation of 415/250V miniature circuit breaker
distribution board in 16SWG sheet steel enclosure, with
double door, internally wired, neutral end earth busbar, and
each comprising of following MCBs having short circuit level
10KA & `C` curve characteristic. Each MCB Distribution
board shall comprise of following and including blank plates,
inscription marking, phase neutral and earth bars, mounted
on M.S. Frame on wall including cutting wall and mending
good damages. Incoming - 1 No. 63A TPN MCB
Outgoing – 2nos 32A TP MCB for connection to UPS
18Nos. 10A/16A/25A/32A SP MCB
(Make of DB & MCB: MDS / LT / SIEMENS/HAVELLS)
1 No.
12. TPN PDB FOR A/C & POWER SS : MCB-Distribution Board
Supplying and installation of 415/250V miniature circuit
breaker distribution board in 16SWG sheet steel enclosure,
with double door, internally wired, neutral end earth busbar,
and each comprising of following MCBs having short circuit
level 10KA. & `C` curve characteristic. Each MCB Distribution
board shall comprise of following and including blank plates,
inscription marking, phase neutral and earth bars, mounted
on M.S. Frame on wall including cutting wall and mending
good damages. Incoming - 1 No. 63A TPN MCB Outgoing -
12 Nos. 10A/16A/25A/32A SP MCB Make of DB & 2 nos.
32A TP MCB
1 No.
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
13. Sub Main Wiring from LT panel / Busbar to TPN DBs :
Supply and Fixing of Distribution wiring with4 X 10 Sq. mm +
2 X 6 Sq.mm Single Core 1100V grade PVC insulated
unsheathed stranded copper wire in in concealed 25mm dia
PVC Conduit Pipe partly laid over false ceiling & partly
concealing of 25mm dia PVC Pipe in Brick wall / floor /
wooden partition / furniture including including making good
the damages. The supply and laying of PVC Pipe, inspection
boxes & other accessories are included in the rate.
30 RM
14. Point Wiring (Concealed Type) – Point Wiring (Concealed
Type) –a)Supply & Fixing Point Wiring (Concealed Type)
including circuit (3x1.5 sq mm) FRLS 1.1kV grade
unsheathed stranded Copper Wire from DB to Switchboard &
Switch Board to Switch Board & Point Wiring from
switchboard to individual light, ceiling fan ,exhaust fan, wall
bracket fan, call bell etc & 6A Plug Socket with 3X 1.5
Sq.mm Single Core 1100V grade unsheathed stranded
copper wire in concealed 20mm dia PVC Conduit Pipe partly
laid over false ceiling & partly concealing of 20mm dia PVC
Pipe in Brick wall / floor / wooden partition / furniture including
16SWG thick MS Junction Box, CI Circular Boxes with 3mm
thick Hylam Cover ,brass screws and washers painting of JB,
cutting of brick wall & mending good damages. The rate
should include supplying and laying of all materials like PVC
conduit, inspection boxes, modular Switch Box, 6A Plate
Type modular Switch, Socket, Brass screws and any other
materials to complete the wiring, making connection and
testing etc, painting and mending good all the damages.
a. Incandescent / Fluorescent / PL Light Points. (from lighting
DB)61 No
b. Wall / Ceiling /Exhaust fan points - do - 25 No.
c. 6A 5pin plug switch socket on same board. - do - 13 No
d. 6A 5pin plug switch socket on separate board. - do - 4 No
e. Call bell point with S & F bell push. - do - 1 No
f. Incandescent / Fluorescent / PL Light Points. from UPSDB15 nos.
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
g. 6A 5 pin plug with switch on separate board (from UPSDB)8 points
15. Power point Wiring : Supply ,Fixing /Laying Power point
concealed with 1100V grade single core 2X4 Sq.mm + 1X2.5
Sq.mm unsheathed stranded FRLS Copper Conductor in
concealed 20mm dia PVC Pipe partly laid over false ceiling &
partly concealing of 20mm dia PVC Pipe in Brick wall / floor /
wooden partition / furniture including making good damages .
The rate should include supply and laying of all materials like
PVC conduit Pipe, saddles, hooks inspection boxes and any
other materials to complete the wiring, making connection
testing, etc. painting and mending good to damages.
60 RM
(only black enamelled mild steel pipe should be used as
conduit.)
16. Providing & Fixing of 16A Switch modular type , 16/6A
Socket shutter type concealed MS Switch Box , Cover etc.
for raw power.
7 No
17. Power point Wiring for A/C : Power point Wiring - Supply ,
fixing & laying Power point concealed with 1100V grade
single core 2X6 Sq.mm +1X4Sq.mm unsheathed stranded
FRLS Copper Conductor in 20 mm dia PVC conduit partly
laid over false ceiling and partly concealed in brick wall/floor
including making good damages . The rate should include
supply and laying of all materials like PVC conduit Pipe
inspection boxes etc. and any other materials to complete the
wiring, making connection from DB and to power unit &
testing , etc. painting and mending good to damages.
40 RM
(only black enamelled mild steel pipe should be used as
conduit.)
18. Supply and fixing of power unit for A/C as per catalog
no.ACPU6M FT 20 Amps of North-West or Havells complete
with starter, MCB,Plug,Socket etc. to be fixed on modular
type MS Box embedded including necessary accessories.
Make : North West.
10 Nos
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
19. Lighting & fan (Material & Labour) :
19a. CFL lights Fittings & lamps, Ballast etc for recessed
mounting: Providing & Fixing 2xPL-L 36W recessed
mounting Luminaire with mirror optics designed Gypsum
type ceiling including S & F of 2 x PL – L 36 W CFL lamps,
etc.
19 No
19b. Providing and fixing Havells make round shaped recessed
mounting luminaire with mirror optics designed for 2 x PL-C
18W including S & F of 2 nos. 2 x 18W PL-C lamps and
other accessories.etc.
20 No
19c. Tube lights Fittings & lamps, Ballast etc for surface mounting
Providing & Fixing surface mounting Luminaire designed for
tube lights or equivalent including S & F of ballast ,1x36W
tube lights, down rods etc
12 No
19d. Wall / Pedestal Fan Oscillating : Providing & Fixing of Wall
/ Pedestal fan 400 mm sweep complete with regulator, etc.,
including interconnecting wiring. 16 No
19e. Exhaust Fan : Providing & Fixing 1400 RPM Exhaust Fan
Heavy Duty 300mm dia complete with mounting ring, louver,
covers, etc including interconnection wiring, making hole on
wall and making good the damages .
5 Nos.
19f. Ceiling Fan Oscillating : Providing & Fixing of Ciling fan 400
mm sweep complete with regulator, etc., including
interconnecting wiring.
4 No
19g. Call bell : Providing & Fixing call bell/buzzer on suitable
board on wall. 1 No
COMPUTER
20. Wiring from DB to UPS & from UPS to UPS DB :
Providing & laying of 2 x 6+1 x 4 sqmm 1100V grade PVC
insulated copper wire, FRLS, (Make- Finolex/Havells) in
concealed 25mm dia PVC conduit (ISI Mark) with all
accessories like saddles, hooks, bends, inspection boxes etc
including supply & fixing of PVC conduit over false ceiling /
in slab / beam / ceiling / on wall from DB to UPS & from UPS
to UPS DB.
20 RM
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
21. Industrial Type Plug & Socket for UPS output :
Providing & Fixing on wall in concealed 16 SWG MS box
with wall matching hylam cover 1no 32 A 3 pin Industrial
Socket with matching plug top3 pin neutral & earth type and
1no 32A DP MCB make including necessary interconnection.
4 No
22. UPS PANEL WITH CHANGE-OVER-SWITCH :
Providing & Fixing of concealed 16 SWG MS sheet metal
enclosure of suitable size consisting of 2 nos 32A change-
over-switch, including necessary interconnections.
1 No
23. UPS DB : Supply & Fixing of UPS MCBSPN Distribution
Board in 16SWG sheet steel enclosure, with double door,
internally wired, neutral end earth busbar, and each
comprising of following MCBs having short circuit level 10KA.
Each MCB Distribution board shall comprise of following and
including blank plates, inscription marking, phase neutral and
earth bars, mounted on M.S. Frame on wall including cutting
wall and mending good damages Incoming 1 No. 32A SPN
MCB. 1 no DP 40A RCCB of 300ma sensitivity .(make-
Alstom/Siemens/MDS/Havells)
Outgoing 6 Nos. 10A/16A SP MCB
1 No
24. Wiring from UPSDB to WORK STATION : Providing &
laying of 2x4+1x2.5sqmm 1100V grade PVC insulated
copper wire, FRLS, (Make- Finolex/Havells) in concealed
20mm dia PVC conduit (ISI Mark) with all accessories like
saddles, hooks, bends, inspection boxes etc including
supply & fixing of PVC conduit over false ceiling/in
slab/beam/ceiling/on wall/in floor/wooden partition/furniture
from UPS DB to work station.
150 RM
(only black enamelled mild steel pipe should be used as
conduit.)
25. Work Station : Supply & installation of Work station
comprising 1 no 16A MODULAR switch, 3 nos 6A 5 pin
MODULAR socket outlet for UPS circuit on MODULAR
switch board flush mounted on wall/wooden panel/furniture.
26 Set
26. Supply & laying of 2 pair telephone cable througrout / 19mm
conduct pipe 60 RM
27. Supply & fixing telephone socket outlet RJ 11 type make MK7 Nos
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
28. Supply & laying of 2 core 23 / 35 speaker wire through 19mm
PVC pipe 50 RM
29. Supply & fixing of 20 watts ceilling speaker transformer 6 Nos
30. Supply & instalation of DVD player model no 3026 Philips or
equivalent that of Sony/Samsung.1 L.S
31. Supply & instalation of amplifier make Ahuja model no SSB
601 L.S
32 Providing support for temporary electrical connection of
lights, UPS Points, Power Points etc. and during shifting of
UPS and Server Room
1 Job LS
33 Buyback of existing wiring, switchboards, DB, Light fittings, Panel1 Job LS
TOTAL Rs.
Asansol Branch
Bank of Baroda
Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount (Rs.)
Section A : Civil & Furnishing Work
Section B : Sanitary & Plumbing Work
Section C : Electrical WorkTOTAL Rs.
ABSTRACT OF CIVIL, FURNISHING , SANITARY PLUMBING, ELECTRICAL WORK FOR ASANSOL BRANCH OF BANK
OF BORODA
Project Cost (Rs.)