1

2.

3.

4.

5.

6.

7.

1.

MINIMUM ELIGIBILITY CRITERIA (Shall be submitted with Part A of the Offer)

Part 'A' will be opened at 3.30 p.m. on 13.06.2011.

Part 'B' of the tenders will be opened for those only who fulfils the qualifying criteria given in the tender document. The

unopened part 'B' along with Earnest Money deposit for those not fulfilling qualifying criteria will be returned.

Clarifications, if any, required on drawings, schedules, specifications, etc. can be obtained from our Consultant M/s.

Biplab Nandi & Associates, 10 Najrul Sarani, Pakurtala More, Hakimpara, Siliguri - 734001 Phone No - 9434759609, 0353

3290293

The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders

without assgming any reason whatsoever.

Bank of Baroda, West Bengal, Sikkim & A & N Island invites sealed tenders in two bid system for the proposed interior &

electrical work of Balurghat Branch, Narayanpur, Najrul Sarani, Opp. Taxi Stand, Balurghat, Dist. Dakshin Dinajpur,

West Bengal-733101. The work is to be completed within 2(Two) weeks.

(Government of India Undertaking)

NOTICE INVITING TENDER

Interested agencies having experience in work of similar nature & magnitude and fulfilling the eligibility criteria given

below may download detailed tender document from Bank's Website http:bankofbaroda.com/tenders.asp

The tenderer should have completed in last three Financial years (i.e. current year & two previous financial year) in

Bank, Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc. minimum 3 (three) similar

Part 'A' envelope (Technical Bid) shall contain : Earnest Money, the documents for satisfying eligibility criteria & the

technical & financial stipulation, if any, of the tenderer & Part 'B' shall contain : financial bid along with a copy of the

tender document, duly signed in all pages both shall be separately sealed & submitted in another sealed envelope to

the Asst. General Manager, Bank of Baroda, West Bengal, Sikkim & A & N Island, BARODA TOWER, Plot No. 38/2, Block GN,

Sector-V, Salt Lake City, Kolkata : 700 091, before 2.30 P.M. on 13.06.2011 along with Earnest money amounting to Rs.

12,000/- by Bank Draft / Pay order in favour of Bank of Baroda shall be submitted in Part 'A'.

Bank of Baroda

2.

3.

4.a) The Tenderer shall furnish copies of :

i) IT Registration Certificate with No.

ii) Sales Tax Registration Certificate with No.

iii) Service Tax Registration Certificate with No.

iv) Electrical Contractor's License with No.

v) Electrical Supervisor’s License with No.

5.

a)

b)

c)

d)

The Tenderer should also submit the following documents along with the Tender.

List of technical persons available on hand, years of their association with the firm & proposed to be engaged for the

subject work, if selected (marked Annexure-IX) ;

List of important plant & machinery available on hand (own) and proposed to be inducted (own & hired to be given

separately) for carpentry & electrical work (marked Annexure-X)

List of works completed in the last (three) financial years under Bank / Govt., Semi - Govt,Govt. undertaking /

Corporate Sectors giving description of work, organisation for whom executed, approximate value of contract at the

time of award, date of award and date of scheduled completion of work, date of actual completion and final value

of contract should also be given (marked Annexure-XI)

marked Annexure - VI

marked Annexure - VII

marked Annexure - VIII

marked Annexure - IV

marked Annexure - V

Bank, Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc. minimum 3 (three) similar

composite work (Interior Furnishing & Electrical) costing not less than Rs. 15.00 lacs in single contract. (Work order &

completion Report in support must be submitted & marked as Annexure-I)

The total contract amount received by the Tenderer during the last 3 financial years should be minimum as 40.00 lacs

per year in contract work. In support of this the Tenderer should submit audited sheet duly Certified by the Chartered

Accountant & marked Annexure-II.

The Tenderer should produce Solvency Certificate from any Nationalised / Scheduled Bank for an amount of 200% of

the advertised Tender value marked Annexure-III.

List of works in hand indicating description of work, contract value, approximate value of balance work yet to be

done and date of award (marked Annexure-XII) 1

e)

1.

2.

3.

4.

5.

6.

7

8.

9.

Contractors will be required to arrange for their own storing. Dismantled materials are to be carted away from site at

their own cost and disposed of in conformity with Municipal regulations.

The quoted rates, are to include cost of all materials, labour and or any other material, all statutory taxes, transport,

handling delivery at site and installation, complete in all respect, as per drawing, directions or instructions of

Employer/Consultant. The quoted rates are also to include dismantling of partitions, counters, old electrical wirings

etc. and stacking serviceable materials and disposal of debris, etc.

Prior approval of the Employer/ Consultant shall be obtained for colour and thickness of laminates to be used in the

work.

Tenderer who will quote the rate must have a local office at Kolkata. This is absolutely essential for day to day

supervision & coordination of the work at site.

All informations are to be fully authenticated & documented failing which the documents submitted will not be accepted.

GENERAL TERMS & CONDITIONS

The tenderer are to visit the site and acquaint themselves with site conditions before quoting rates.

The arrangement for “ Wire Management " is to have prior approval of the Client.

The quoted rates shall remain firm during the entire currency of contract. No price variation for any causes

whatsoever, shall be entertained.

The time of completion shall be two (2) weeks from the date of placement of order.

The offer shall remain valid for acceptance for a period of 30 days from the date of submission of offer.

Payments will be made once on completion by the Employer within 15 days after certification of bill by the Consultant

10% of the total payable amount is to be retained as retention money and will become due for release after expiry of

six months from the date of completion of the installation & subject to satisfactory maintenance of the executed work.

10.

11.

SPECIFICATION OF MATERIALS FOR INTERIOR WORK

Sl.No. Description

1. Laminate

2. Ply & Block Board

3. Glass

4. False Ceiling & Accessories

5. Veneer

6.Textured Wall Paint

7. Glue

8. Locks

9. Aluminium Hardware Fittings

India Gypsum Ltd.

Marino / Greenlam / Century / Archid

Make (s)

Metako / Allen / Crown with ISI Mark

The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders

without assgming any reason whatsoever.

Durian / Century / Archid

ICI, Jenson & Nicholson / Asian paint /

Berger

ICI, Spectrum, Heritage

Godrej / Secur / Yale

Green / Century / Archid / Austin

Modi / Indo Ashahi / Float Glass India Ltd.

six months from the date of completion of the installation & subject to satisfactory maintenance of the executed work.

Tenders addressed to Asst. General Manager, Bank of Baroda, West Bengal & Sikkim Region and submitted at his office

at BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt lake City, Kolkata : 700 091, before 2.30 P.M. on 13.06.2011,

accompanied by Earnest Money amounting to Rs. 12,000/- by Bank draft payable to Bank of Baroda and other

documents as mentioned in NIT. Part 'A' of the tenders will be opened at 3.30 P.M. on the same date.Part 'B' will be

opened immediately after opening of Part 'A'.

2

10. Brass Hardware

11.

Floor Spring

12. Screws

13. Casters

14. Sliding Drawers / Channels

15. Furnishing Fabric

16. Leather Foam

17. PVC Flooring

18. Carpet

SPECIFICATIONS OF MATERIALS FOR ELECTRICAL WORK

Sl.No. Description

1. Switch fuse / fuse switch units (HRC) (32A TPN & above)

2. Timer (TSQ 100)

3. Voltmeter & Ammeter

L & T

GE power / SIEMENS / L&T / Schneider

Brass Arts / Vijoy

Evrite Agencies Pvt. Ltd. / Nita Floor Spring

Nettle Fold

Efficient Gadjets

Earl Behari / Efficient Gadjets

A. E. / IMP

Make (s)

Glamour or Favourite (Balla Industries)

Woven type "Harmony" range from "Vimal"

or equivalent

Bhor Industries or equivalent

Armstrong / Krishna / Premier

4. Voltmeter & Ammeter selector switches

5. Phase indicating lamp

6.

7. Capacitor

8. HRC fuses

9. Power Cable : XLPE

10.

11. HRC fuse base & carriers.

12. PVC terminals

13. 1.1 KV grade PVC insulated armoured aluminium cable (ISI marked)

14. 1.1KV 660V grade PVC insulated & sheathed / insulated copper wire &

flexible cords (ISI marked).

15. Moulded case circuit breaker

16. RCCB / ELCB

17. Switch fuse with rewirable fuses. (6A & 32A TPN)

18. Isolator

NATIONAL/FINOLEX/ HAVELLS

KAYCEE / L & T

CROMPTON/SIEMENS

TATA LEVERT/NEUMERIC/ KIRLOSKAR

GLOSTER/INCAB/POLYCAB/CINOLEX

GE power / SIEMENS / L & T / SCHNEIDER

Vaishno / SIEMENS / ROSS controls

SWITCHGEAR

UNIVERSAL / GLOSTER / NATIONAL / NICCO /

FINOLEX/HAVELL'S

L & T / SCHNEIDER/LEGRAND

HAVELL’S / STANDARD

HAVELL’S / STANDARD

LEGRAND/ SIEMENS / L&T

ELMEX / ESSEN

A E / KAPPA SEGC & CONTROLS / CONTROL

GE Power/SIEMENS/L&T/SCHNEIDEV

3

19. Changeover switch (on load type)

20. MCB distribution board

21. Distribution fuse board with rewireable fuses

22. Miniature circuit breaker / MCB type isolator

23. Contractors

24. Auxiliary contractor

25. 1/16 Amp Piano key type switch / flushed type plug socket

26. 6/16 Amp modular switch / socket, module plate & mounting M.S. /

PVC box.

27. 300W, 2 module electronic regulator

Sl.No. Description

28. Ceiling rose

29. Holder

31. Luminous indicating type buzzer with cancellation push.

32. Alarm bell.

33. G.I. pipe

34. Steel conduits (conforming to IS in all respects)

NATIONAL / HOMA / EQUIVALENT

Make (s)

KHERAJ / GETCO

KAY / EPP / ANCHOR / JJ

HAVELL’S / BPC / BOSMA

KAY / EPP / ANCHOR / JJ

CPL (Genius) / ANCHOR (Roma) / CRABTREE

/

MK

ANCHOR (Roma) / CRABTREE / MK

ANCHOR / PRECISION / SSK & RIDER

BEC / SUPREME / AKG

BST / BANSAL

SIEMENS / L & T/BCH

SIEMENS / L & T

LEGRAND / SIEMENS

KENBAR / HAVELLL’S / ELCON / HPL /

CONTROL & SWITCHGEAR.

LEGRAND/ SIEMENS

34. Steel conduits (conforming to IS in all respects)

35. Black enamelled

36. Galvanised

37. Non-metallic PVC conduit pipe

38. Compression type brass gland

39. Cable termination socket

40. Light fitting & lamps

41. Decorative/Ornamental /Chandelier / Light Fittings

42. Ceiling Fan

43. Exhaust fan

44. Industrial type socket & top

45. Telephone wire

46. Telephone Socket

Good local make with minimum wall

thickness of 3 mm. for 19 / 20 mm. and 25mm

sizes & 2.5 mm. for 12mm. sizes

BEC / SUPREME / AKG

BEC / SUPREME / AKG

DOWELL'S

WIPRO or equivalent

DOWELLS / JOHNSON / COMET

PLAZA / KALINGA/ PRECISION/AKG or

equivalent

CROMPTON / POLAR / KHAITAN

CROMPTON / POLAR / KHAITAN

HAVELL’S / CROMPTON / LEGRAND

FINOLEX / RRK/NATIONAL

CRABTREE/MK

CROMPTON / POLAR / KHAITAN / EPC

4

47. Network Cable

48. Contractors

49. STARTERS

FINOLEX or equivalent

L & T / SIEMENS

NORTH WEST / CABTREE

5

Section A : Civil & Furnishing Work

Sl. No. Description of Item Qty. Unit Rate (Rs.) Amount

1 GYPSUM CEILING : Providing and fixing 12.5mm thick Gypboard conforming

to IS 2095-1982 on metal frame suspended from RCC roof having following

sizes:

Intermediate channel – 45 x 0.9 x 15mm to be placed at 1220mm c/c.

Ceiling angle – 25 x 10 x 0.55mm to be hung from the RCC roof with rawl

plug and clip to be placed at 1220mm c/c.

Ceiling Section – 0.55mm x 51.5mm x 26mm x 10.5mm lipping to be fixed

with the intermediate channel with the help of connecting clip placed at

457mm c/c. Jointing and finishing to be done as per manufacturers

guidelines.

Rate shall be inclusive of any vertical ceiling part, spot, tube light, fans, AC

grills, fire and security systems cutouts with framing, and finishing with

necessary jointing compound, paper tape, and two coats of plastic paint.

Rate should be included of cornice, borders, beading etc.

132 Sq.m

2 PLASTER OF PARIS CORNICE : Providing and fixing plaster of paris

cornice(out of 65 x 65mm sections)at junctions of false ceiling,walls and at

other locations. 70 Rmt

3 Solid Partition (Partition Type – 1 as marked in the drawing ) : Providing

and fixing partition framing upto ceiling level. Framing shall consist of 50 x 50

mm wood member, at 600 mm c/c bothways horizontally and vertically.

Above false ceiling, alternate vertical sections to be extended upto main

ceiling and to be fixed with MS cleats. Framing to be covered on both sides

with 6 mm thick BWR plywood finished with 1mm thick laminate of approved

shade and colour, necessary groove work, beadings, moulding and 75 x 12

mm t.w. skirting duly polished. The item is to be finished complete in all

5 Sq.m

ESTIMATE FOR CIVIL, FURNISHING & ELECTRICAL WORK FOR

BALURGHAT BRANCH OF BANK OF BORODA

mm t.w. skirting duly polished. The item is to be finished complete in all

respects. (Tenderer should visit the site and check the actual floor height –

Partition to be measured upto false ceiling height excluding door opening for

Billing purpose)

4 FULL HEIGHT PARTLY GLAZED PARTITION (Partition Type – 2 as

marked in the drawing ): Providing and fixing partition framing upto

ceiling level. Framing shall consist of 50 x 50 mm wood member, at 600

c/c bothways horizontally and vertically. Above false ceiling alternate

vertical sections to extend upto main ceiling and to be fixed with MS

cleats. Framing to be covered on both sides with 6mm thick BWR ply

finished with 1mm thick laminate, necessary groove work, beadings,

moulding and 75 x 12 mm t.w. skirting duly polished. Upto a height of

900 mm from FFL and from 2100 mm upto the false ceiling, the partition

should be made solid / fully blocked; from 900 mm to 2100 mm clear

glass of 8 mm thickness etched as per direction of the Consultant fixed

with t.w. moulding of 19 x 35. The item is to be finished complete in all

respects. (Tenderer should visit the site and check the actual floor

height – Partition to be measured upto false ceiling height excluding

door opening for Billing purpose).

50 Sq.m

5 LOW HEIGHT PARTLY GLAZED PARTITION (Partition Type – 3 as

marked in the drawing ) : Providing and fixing partition framing upto

total height of 1500 mm. Framing shall consist of 50 x 50 mm wood

member, at 600mm c/c bothways horizontally and vertically. Framing

to be covered on both sides with 6mm thick BWR ply finished with 1mm

thick laminate upto 1050 mm height, necessary groove work, beadings,

moulding and 75 x 12 mm t.w. skirting duly polished and above 900

mm level, glazed by 8mm thick 300mm high glass etched as per

approved design upto 450 mm height. The item is to be finished in all

respects. (Partition to be measured excluding door opening for Billing

purpose).

14 Sq.m

6

6 MAIN ENTRANCE DOOR : Providing and fixing fully glazed Aluminium

framed door with approved colour powder coated sections with 101 x

45 x 2.5mm thck alumnium section for top, bootom and middle rail and

50 x 45 x 2.5 mm thick sections for vertical styles and Door frame with

101 x 45 x 2.5 alumnium sections. Glazing with 12mm thick toughened

glass complete with heavy duty floor spring of approved make and

handle complete.

a) For Banking Hall 4 Sq.m

7 FLUSH DOOR : Providing and fixing in position 35 mm solid core flush

door finished with 1mm thick laminate as per design on both sides duly

polished, t.w. lipping on two vertical and horizontal edges having

cylindrical lock, door stopper, brass hinges, etc. Also providing 75 x

62.5mm second class t.w. frame having t.w. lipping fixed in either

surface of the frame duly polished with 3 coats of lacquer melamine

and fixed to the partition frame.

8 Sq.m

8 PARTLY GLAZED DOOR : Providing and fixing in position 25 mm solid

core panel door finished with 1mm thick laminate on both sides upto

1050 mm height, t.w. lipping on two vertical and horizontal edges,

cylindrical door lock, door stopper, etc., 75 x 62.5mm second class t.w.

frame with t.w. lipping, 8 mm thick glass with necessary etching and /

or frosting to be provided as per design / directions, fixed with wooden

mouldings from both sides. All exposed woodwork to be melamine

polished. The work should be finished as per specification, design and

completed in all respects.

10 Sq.m

9 FIXED GLAZING : Providing and fixing in position 12 mm thick

toughened glass, etched as per design fixed in 50 x 50 mm wooden

framework with necessary t.w. moulding in two pieces in front of the6 Sq.m

framework with necessary t.w. moulding in two pieces in front of the

cash / one window team as per design.

10 STORAGE UNIT : Providing and placing in position Storage units

fabricated out of 19mm thick BWP block board on all sides, backing

and separators will be of 6mm thick BWP ply, shelves and shutters will

be of 19mm thick BWR solid ply. The top, sides, shutter front and back

sides (if exposed) to be finished with 1mm thick laminate with

necessary grooves and the exposed edges of block board should be

finished with 6mm t.w. lipping. Inside of the unit will be polished in

matching tone. Unit should be provided with locks, hinges, sliding

drawer channels, handles, ball catchers and tower bolt fixed. There

should also be a 75 x 12 mm t.w. skirting with grooves as per design

polished in matching tone.

20 Sq.m

11 SIDE & BACK UNIT: Providing and placing in position side and back

units fabricated out of 19mm thick BWP block board on all sides,

backing and separators will be of 6mm thick BWP ply, shelves. Shutters

will be of 12mm thick BWR solid ply. The top, sides, shutter front and

back sides (if exposed) to be finished with 1mm thick laminate with

necessary grooves and the exposed edges of block board should be

finished with 6mm t.w. lipping. Inside of the unit will be polished in

matching tone. Unit should be provided with locks, hinges, sliding

drawer channels, handles, ball catchers and tower bolt fixed. There

should also be a 75 x 12 mm t.w. skirting with grooves as per design

polished in matching tone. (Only front area to be measured for

payment.)

6 Sq.m

7

12 TABLE : Providing and placing in position table fabricated out of

19mm thick BWP block board on all sides finished with 1.0 mm thick

laminate on top, 1mm thick laminate on the sides and front. The work

to be completed by fabricating drawers on one side and leg rest.

Inside of the table and drawers should be polished. Drawers have to

be provided with locks and handles and exposed surfaces are to be

finished with 1mm thick laminate. Table edges are to be finished with

t.w. moulding duly polished. There should be a 75 x 12 mm skirting with

grooves duly melamine polished. Exposed edges of the boards will be

finished with t.w. lipping.(including Wire Manager)

a) Branch Manager’s Table ( 6' X 3' ) 1 no.

b) Officer’s Table ( 5' X 2'-6'). 1 no.

c) Cash counters (As per detailed drawing) 4.2 Rmt

d) Staff Tables (4' x 2' 6 " ) as pe drawing for cash shroffing area. 2 nos.

e) Clerk 1 table( 3' X 2'-6'). 1 no

f) Clerk 2table( 8'-6" X 2'-6'). 1 no

13 WRITING LEDGE : Supply, fitting and fixing 19mm thick granite slab at

a height of 1050mm from FFL with machine polished moulded edges

(950 x 300mm) of approved shade and quality to portion of wall,

including cutting chase in wall and mending good the damages, the

slab supporting itself of 50mm dia stainless steel pipe inside filled with

wooden section of appropriate size and shape to form writing ledge.

1 no.

14 VERTICAL BLIND – Providing and fixing 100mm wide vertical Blinds of

approved shade of Vista Levolor / Marvel/ Mac make .15 Sq.m

15 PIN-UP BOARDS : Supplying and fixing pin-up boards fabricated out of

12mm BWP ply covered with 12mm soft board padding and

upholstered with poly propylene fabric @ Rs. 150/- per meter edges of

soft board should have t.w. moulding duly spirit polished.

4 Sq.m

16 DISPLAY PANELS: Supplying and fixing in position frameless double

Acrylic transparent sheet 2'-6"(l) x 1'-6"(w)mounted with mirror

screws/nuts on the wall along with all accessories complete for display

of bank's schemes/posters/notices inserted on it.

1 no

17 CHEQUE DROP BOX : Supplying,fitting and fixing cheque drop box of

size : 2'x2'x6", made of 19mm thk blockboard,1mm thk.laminate

finished.The front facia made of 8mm thick clear float glass with 1"

wide slit for inserting cheques.

1 no

18 PLANTERS : Providing and placing planters ( 450 x 450 x 450 ) of

appropriate size made out of 19 mm block board & outer side finished

with 1mm laminate of appropriate shade & colour in position of plants.6 nos.

8

19 SUGGESTION BOX (450 x 600 x 200) : Providing and fixing suggestion

box made out of 19mm BWP ply and finished with 1mm laminate and

enamel painted on the inside. A 300 mm long slit is to be made in the

front for letters, etc. The work should be completed in all respects.

1 nos.

20 PAINTING : Providing and applying 2 coats of plastic emulsion paint

over 1 coat of primer of approved shade and colour on walls, columns

and ceiling. The job is inclusive of scraping, leveling and preparing the

surface, applying primer, etc.

288 Sq.m

21 ENAMEL PAINING : Providing and applying 2 coats of enamel paint

over 1 coat of primer of approved shade as per direction of the

Architect. The job is inclusive of scraping, leveling and preparing the

surface, applying primer, etc.

72 Sq.m

22 POP PUNNING : Providing and applying Plaster of Paris punning on

average 15mm thickness on ceiling, walls and columns to bring the

surface in plumb line and level. Rate will be inclusive of scraping,

leveling and preparing the surface as also grooves above skirting,

around window and door frames. Rate to include scraping, neeru /

any other finish on the existing plastered surface.

288 Sq.m

23 KOTA STONE PANTRY COUNTER: 5 Rmt

24 WOODEN COUNTER FOR PANTRY: 2.5 Rmt

25 STAINLESS STEEL SINK 1 no

26 Providing & fixing Wall & Column Paneling with 6 mm BWR ply and

1mm thick laminate of approved shade and colourwith 25 x 25

wooden framing at 450 mm c/c bothways.

18 Sq.m

27 Providing & fixing Sparkle series Frosted film of 3M Make to the glasses to

be fixed as per design and pattern including designing of Banks Logo as

directed . ( base price of Film Rs.110 /- per Sft inclusive of tax ).3 Sq.m

28 Fixing Teak Wooden decorative beading 50 mm wide polished as per

direction of the Architect.150 RM

29 PROVIDING & PLACING IN POSITION OF CHAIRS AS UNDER:-

i Revolving chairs for Manager (Godrej make 7001) 1 no

ii Revolving chairs for all Staff (Godrej make 5002T) 8 nos

iii Visitors chairs (Godrej make 1007) S type. 5 nos

30 MULTI SEATER FOR CUSTOMER WAITING AREA OF GODREJ MAKE:-

i 3 Seater 2 no

TOTAL Rs. 0

9

Section B : Electrical Work

1a. Main Switch : Providing & fixing of 415V 125A TPN SFU with HRC fuses

on angle iron frame on wall concealed. Including connection from Meter

board.1 No.

1b. Providing & fixing of 415V 63A TPN SFU with HRC fuses on angle iron

frame on wall. Including connection from generator supply.1 No.

2. Earth Busbar (For Computer System) : Providing & Fixing earth busbar

of 25 x 3 mm copper strip for connection to UPS and earth station 1 RM

3. EARTH BUSBAR : Providing and fixing earth busbar of 50mm x 6mm G.I.

strip on surface for connections etc. as required.1 RM

4. G. I. EARTH PIPE ELECTRODE : Earthing with G. I. earth pipe 4.5 M

long x40mm dia including accessories, and providing masonry enclosure

with cover plate having locking arrangement and watering pipe etc. with

charcoal or coke and salt at alternate layer as required complete as

required.

2 Sets

5. Earthing station : 600x600x3mm copper plate earthing station with

earthing resistance less than 2 ohms including watering PVC/GI pipe with

funnel ,excavation till7’0”or as instructed by site-in charge, backfilling with

compaction ,1no 25x3mm copper flats connected to the copper plate till

the existing ground level, copper nuts & bolts, salt, and coal filling in layers

10”x10” masonry chamber with sand plaster ,RCC, or cast iron lid

,inclusive of 5mtr conduiting of earthing of copper 10 SWG in Black

Enameled MS conduit to start from the ground level, complete as directed

in site manual.

1 No.

6. Supplying and laying G.I. earth strip 25x3 at surface for connection to

equipment & at 0.5 M below ground for connection from earth electrode to 50 RMequipment & at 0.5 M below ground for connection from earth electrode to

earth busbar including soldering etc. as required.50 RM

7. CU Earth Wire: Providing & Fixing of 2nos 16sq.m. PVC insulated

copper Wire from earth busbar to UPS & from earth busbar to earth

station.50 RM

8a. 3.1/2 C PVC/A Al cable : Providing & Laying 3.1/2 C 95 sq.mm PVC/A Al

cable along with 2nos 7/10 SWG GI wire as earth continuity wire. 50 RM

8b. 3.1/2 C PVC/A Al cable : Providing & Laying 3.1/2 C 25 sq.mm PVC/A Al

cable along with 2nos 8 SWG GI wire as earth continuity wire. 50 RM

9a. Cable Termination : End connection of the above 3 1/2 core 95 sq.mm

cable by double compression type brass cable gland crimping type

sockets, tapes etc 2 Set

9b. Cable Termination : End connection of the 3.1/2 x 25 sq.mm by double

compression type brass cable gland crimping type sockets, tapes etc 4 Set

10. LT PANEL at Ground Floor :-

Fabricating, assembling, painting, supplying, erecting, testing,

commissioning of Cubicle type LT panel board fabricated out of 2mm

thick CRCA MS sheet with proper earthing attachment with proper earthing

attachment and provision of bottom /top entry/exit for all cables including

indicating lamps in all phases showing ON/OFF condition.

INCOMING

10

1NO 415V 125A TPN SFU(MAINS)with HRC fuse

1NO 415V 63A TPN SFU(GEN) with HRC fuse

SFUS are Panel mounting Type

1 NO 4 strip horizontal (extension type)copper busbar

200A capacity for MAINS

1 NO 4 strip horizontal (extension type)copper busbar 100A capacity for

GENERATOR 1 NO 4P 415 V on load

Change-Over Switch 200A capacity

1No flush square pattern 96mm square 0-500V range AC voltmeter with

phase selector switch of 3 positions and OFF with HRC fuse links for

protection. It should be fitted

on the incoming side of 125A SFU 1

NO square pattern 96mm square 0-200A range AC ammeter with 3 nos

CT of ratio 200/5 A and phase selector switch of 3 positions and OFF. It

should be fixed on the out going side of 125A SFU

OUTGOING

4 NOS 415 V 63A TPN SFU with HRC fuse

The board should be complete with fabrication of all frames, indicating

lamps, danger board, interconnection with PVC insulated unarmoured

single core cable of appropriate sizes. All cables, conduits, flexible

conduits should be neatly laid and armoured should be finished properly

1 No.

11. TPN DB FOR LIGHTING & COMPUTER : MCB-Distribution

Board - Supplying and installation of

415/250V miniature circuit breaker distribution board in 16SWG sheet steel

enclosure, with double door, internally wired, neutral end earth busbar, and

each comprising of following MCBs having short circuit level 10KA & `C`

curve characteristic. Each MCB Distribution board shall comprise of

following and including blank plates, inscription marking, phase neutral and

earth bars, mounted on M.S. Frame on wall including cutting wall and

mending good damages. Incoming - 1 No. 63A TPN MCB

Outgoing – 2nos 32A TP MCB for connection to UPS 18Nos.

10A/16A/25A/32A SP MCB (Make of DB & MCB:

1 No.

10A/16A/25A/32A SP MCB (Make of DB & MCB:

MDS / LT / SIEMENS/HAVELLS)

12. TPN PDB FOR A/C & POWER SS : MCB-Distribution Board Supplying

and installation of 415/250V miniature circuit breaker distribution board in

16SWG sheet steel enclosure, with double door, internally wired, neutral

end earth busbar, and each comprising of following MCBs having short

circuit level 10KA. & `C` curve characteristic. Each MCB Distribution board

shall comprise of following and including blank plates, inscription marking,

phase neutral and earth bars, mounted on M.S. Frame on wall including

cutting wall and mending good damages. Incoming - 1 No. 63A TPN MCB

Outgoing - 12 Nos. 10A/16A/25A/32A SP MCB Make of DB & 2 nos. 32A

TP MCB

1 No.

13a. Sub Main Wiring from LT panel / Busbar to TPN DBs : Supply and

Fixing of Distribution wiring with4 X 10 Sq. mm + 2 X 6 Sq.mm Single

Core 1100V grade PVC insulated unsheathed stranded copper wire in in

concealed 25mm dia PVC Conduit Pipe partly laid over false ceiling &

partly concealing of 25mm dia PVC Pipe in Brick wall / floor / wooden

partition / furniture including including making good the damages. The

supply and laying of PVC Pipe, inspection boxes & other accessories are

included in the rate.

60 RM

11

14. Point Wiring (Concealed Type) – Point Wiring (Concealed Type)

–a)Supply & Fixing Point Wiring (Concealed Type) including circuit (3x1.5

sq mm) FRLS 1.1kV grade unsheathed stranded Copper Wire from DB to

Switchboard & Switch Board to Switch Board & Point Wiring from

switchboard to individual light, ceiling fan ,exhaust fan, wall bracket fan,

call bell etc & 6A Plug Socket with 3X 1.5 Sq.mm Single Core 1100V

grade unsheathed stranded copper wire in concealed 20mm dia PVC

Conduit Pipe partly laid over false ceiling & partly concealing of 20mm dia

PVC Pipe in Brick wall / floor / wooden partition / furniture including

16SWG thick MS Junction Box, CI Circular Boxes with 3mm thick Hylam

Cover ,brass screws and washers painting of JB, cutting of brick wall &

mending good damages. The rate should include supplying and laying of

all materials like PVC conduit, inspection boxes, modular Switch Box, 6A

Plate Type modular Switch, Socket, Brass screws and any other materials

to complete the wiring, making connection and testing etc, painting and

mending good all the damages.

a. Incandescent / Fluorescent / PL Light Points. (from lighting DB) 55 No

b. Wall / Ceiling /Exhaust fan points - do - 20 No.

c. 6A 5pin plug switch socket on same board. - do - 5 No

d. 6A 5pin plug switch socket on separate board. - do - 15 No

e. Call bell point with S & F bell push. - do - 1 No

f. Incandescent / Fluorescent / PL Light Points. from UPSDB 1 nos.

g. 6A 5 pin plug with switch on separate board (from UPSDB) 5 points

15. Power point Wiring : Supply ,Fixing /Laying Power point concealed with

1100V grade single core 2X4 Sq.mm + 1X2.5 Sq.mm unsheathed stranded 1100V grade single core 2X4 Sq.mm + 1X2.5 Sq.mm unsheathed stranded

FRLS Copper Conductor in concealed 20mm dia PVC Pipe partly laid over

false ceiling & partly concealing of 20mm dia PVC Pipe in Brick wall / floor /

wooden partition / furniture including making good damages . The rate

should include supply and laying of all materials like PVC conduit Pipe,

saddles, hooks inspection boxes and any other materials to complete the

wiring, making connection testing, etc. painting and mending good to

damages.

90 RM

(only black enamelled mild steel pipe should be used as conduit.)

16. Providing & Fixing of 16A Switch modular type , 16/6A Socket shutter

type concealed MS Switch Box , Cover etc. for raw power. 6 No

17.a) Power point Wiring for A/C : Power point Wiring - Supply , fixing & laying

Power point concealed with 1100V grade single core 2X6 Sq.mm

+1X4Sq.mm unsheathed stranded FRLS Copper Conductor in 20 mm dia

PVC conduit partly laid over false ceiling and partly concealed in brick

wall/floor including making good damages . The rate should include supply

and laying of all materials like PVC conduit Pipe inspection boxes etc. and

any other materials to complete the wiring, making connection from DB and

to power unit & testing , etc. painting and mending good to damages.

130 RM

(only black enamelled mild steel pipe should be used as conduit.)

18a. Supply and fixing of power unit for A/C as per catalog no.ACPU6M FT 20

Amps of North-West or Havells complete with starter, MCB,Plug,Socket

etc. to be fixed on modular type MS Box embedded including necessary

accessories. Make : North West.

5 Nos

12

19. Lighting & fan (Material & Labour) :

19a. CFL lights Fittings & lamps, Ballast etc for recessed mounting: Providing &

Fixing Phillips FBS 450 / 236 M2 FA HF 2xPL-L 36W (Firey Amber) make

recessed mounting Luminaire with mirror optics designed Gypsum type

ceiling including S & F of 2 x PL – L 36 W CFL lamps, etc. 10 No

19b. Providing and fixing Havells make round shaped recessed mounting

luminaire with mirror optics designed for 2 x PL-C 18W (Philips Cat no. DL

21Plus LHOC 71226399) including S & F of 2 nos. 2 x 18W PL-C lamps

and other accessories.etc. Equivalent makes : Phillips Philips Cat no.

FBH 150/218) including S & F of 2 nos. 2 x PLC – 18W

30 No

19c. Tube lights Fittings & lamps, Ballast etc for surface mounting Providing &

Fixing PHILIPS make surface mounting Luminaire designed for tube lights

(PHILIPS CAT No- TMC 501/ 136 HFor equivalent) including S & F of

ballast ,1x36W tube lights, down rods etc10 No

19d. Tube lights Fittings & lamps, Ballast etc for surface mounting Providing &

Fixing PHILIPS make surface mounting Luminaire designed for tube lights

(PHILIPS CAT No- TMS 2005/ 120(2' WITH CAPS) or equivalent) including

S & F of ballast ,1x20W tube lights, down rods etc3 No

19e. Bonsai light for cash counter. Fittings & lamps, Ballast etc for surface

mounting Providing & Fixing PHILIPS make surface mounting Luminaire

designed for bonsailights (PHILIPS CAT No- FMS 600/ 136 including S &

F of ballast ,1x36W lights.

3 No

19f.1 Wall / Pedestal Fan Oscillating : Providing & Fixing of Wall / Pedestal

fan 400 mm sweep complete with regulator, etc., including 16 Nofan 400 mm sweep complete with regulator, etc., including

interconnecting wiring. 16 No

19f.2 Exhaust Fan : Providing & Fixing 1400 RPM Exhaust Fan Heavy Duty

300mm dia complete with mounting ring, louver, covers, etc including

interconnection wiring, making hole on wall and making good the damages

.

4 Nos.

19g. Call bell : Providing & Fixing call bell/buzzer on suitable board on wall. 1 No

COMPUTER

20. Wiring from DB to UPS & from UPS to UPS DB :

Providing & laying of 2 x 6+1 x 4 sqmm 1100V grade PVC insulated copper

wire, FRLS, (Make- Finolex/Havells) in concealed 25mm dia PVC conduit

(ISI Mark) with all accessories like saddles, hooks, bends, inspection

boxes etc including supply & fixing of PVC conduit over false ceiling / in

slab / beam / ceiling / on wall from DB to UPS & from UPS to UPS DB.

70 RM

21. Industrial Type Plug & Socket for UPS output :

Providing & Fixing on wall in concealed 16 SWG MS box with wall

matching hylam cover 1no 32 A 3 pin Industrial Socket with matching

plug top3 pin neutral & earth type and 1no 32A DP MCB make including

necessary interconnection.

4 No

22. UPS PANEL WITH CHANGE-OVER-SWITCH : Providing &

Fixing of concealed 16 SWG MS sheet metal enclosure of suitable size

consisting of 2 nos 32A change-over-switch, including necessary

interconnections.

1 No

13

23. UPS DB : Supply & Fixing of UPS MCBSPN Distribution Board in 16SWG

sheet steel enclosure, with double door, internally wired, neutral end earth

busbar, and each comprising of following MCBs having short circuit level

10KA. Each MCB Distribution board shall comprise of following and

including blank plates, inscription marking, phase neutral and earth bars,

mounted on M.S. Frame on wall including cutting wall and mending good

damages Incoming 1 No. 32A SPN MCB. 1 no DP 40A RCCB of 300ma

sensitivity .(make-Alstom/Siemens/MDS/Havells)

Outgoing 6 Nos. 10A/16A SP MCB

1 No

24. Wiring from UPSDB to WORK STATION : Providing & laying of

2x4+1x2.5sqmm 1100V grade PVC insulated copper wire, FRLS, (Make-

Finolex/Havells) in concealed 20mm dia PVC conduit (ISI Mark) with all

accessories like saddles, hooks, bends, inspection boxes etc including

supply & fixing of PVC conduit over false ceiling/in slab/beam/ceiling/on

wall/in floor/wooden partition/furniture from UPS DB to work station.

270 RM

(only black enamelled mild steel pipe should be used as conduit.)

25. Work Station : Supply & installation of Work station comprising 1 no 16A

MODULAR switch, 4 nos 6A 5 pin MODULAR socket outlet for UPS circuit

on MODULAR switch board flush mounted on wall/wooden panel/furniture. 10 Set

26. Supply & laying of 2 pair telephone cable througrout / 19mm conduct pipe 160 RM

27. Supply & fixing telephone socket outlet RJ 11 type make MK 8 Nos

28. Supply & laying of 2 core 23 / 35 speaker wair through 19mm PVC pipe 90 RM

29. Supply & fixing of 20 watts ceilling speaker transformer 6 Nos29. Supply & fixing of 20 watts ceilling speaker transformer 6 Nos

30. Supply & instalation of DVD player model no 3026 Philips or equivalent that

of Sony/Samsung.1

31. Supply & instalation of amplifier make Ahuja model no SSB 60 1

TOTAL Rs. 0

14

WORK

INTERIOR WORK

ELECTRICAL WORK

GRAND TOTAL

ESTIMATE OF REFURBISHING WORK OF BANK OF BARODA, BALURGHAT BRANCH

GENERAL SUMMARY

AMOUNT

15