Upload
nguyendat
View
216
Download
1
Embed Size (px)
Citation preview
1
2.
3.
4.
5.
6.
7.
1.
2.
3.
Bank of Baroda, West Bengal, Sikkim & A & N Island invites sealed tenders in two bid system for the
proposed interior & electrical work of Uttarpara Branch,62&66 Amarnath Ghosh Road( Station Road),
P.O- Uttarpara, Dist - Hoogly, West Bengal. Pin-712258. The work is to be completed within 2(Two)
weeks.
(Government of India Undertaking)
NOTICE INVITING TENDER
Interested agencies having experience in work of similar nature & magnitude and fulfilling the eligibility
criteria given below may download detailed tender document from Bank's Website
http:bankofbaroda.com
Part 'A' envelope (Technical Bid) shall contain : Earnest Money, the documents for satisfying eligibility
criteria & the technical & financial stipulation, if any, of the tenderer & Part 'B' shall contain : financial
bid along with a copy of the tender document, duly signed in all pages both shall be separately sealed
& submitted in another sealed envelope to the Deputy. General Manager, Bank of Baroda, West
Bengal, Sikkim & A & N Island, BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt Lake City, Kolkata : 700
091, by 3 P.M. on 05.04.2012 along with Earnest money amounting to Rs. 13,000/- by Bank Draft / Pay
order in favour of Bank of Baroda shall be submitted in Part 'A'.
Part 'A' will be opened at 4.00 p.m.. on 05.04.2012.
Part 'B' of the tenders will be opened for those only who fulfils the qualifying criteria given in the tender
document. The unopened part 'B' along with Earnest Money deposit for those not fulfilling qualifying
criteria will be returned.
Clarifications, if any, required on drawings, schedules, specifications, etc. can be obtained from our
Consultant M/s. Kalpangan Consultants Pvt Ltd, Flat no- 9, 4, Dr. Sundari Mohan Avenue, Kolkata -
700014, Phone no - 9830162952 , 22842494.
The Bank reserves the right to summarily reject any or all application without assigning any reason there
for.
MINIMUM ELIGIBILITY CRITERIA (Shall be submitted with Part A of the Offer)
The tenderer should have completed in last three Financial years (i.e. current year & two previous
financial year) in Bank, Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc.
minimum 3 (three) similar composite work (Interior Furnishing & Electrical) costing not less than Rs. 22.00
lacs in single contract. (Work order & completion Report in support must be submitted & marked
annexure-I)
The total contract amount received by the Tenderer during the last 3 financial years should be minimum
as 40.00 lacs per year in contract work. In support of this the Tenderer should submit audited sheet duly
Certified by the Chartered Accountant & marked annexure-II.
The Tenderer should produce Solvency Certificate from any Nationalised / Scheduled Bank for an
amount of 200% of the advertised Tender value marked annexure-III.
Bank of Baroda
1
4.a) The Tenderer shall furnish copies of :
i) IT Registration Certificate with No.
ii) Sales Tax Registration Certificate with No.
iii) Service Tax Registration Certificate with No.
iv) Electrical Contractor's License with No.
v) Electrical Supervisor’s License with No.
5.
a)
b)
c)
d)
e)
- marked annexure - IV
- marked annexure - V
- marked annexure - VI
- marked annexure - VII
- marked annexure - VIII
The Tenderer should also submit the following documents along with the Tender.
List of technical persons available on hand, years of their association with the firm & proposed to be
engaged for the subject work, if selected (marked annexure-IX) ;
List of important plant & machinery available on hand (own) and proposed to be inducted (own & hired
to be given separately) for carpentry & electrical work (marked annexure-X)
List of works completed in the last (three) financial years under Bank / Govt., Semi - Govt. Govt.
undertaking / Corporate Sectors giving description of work, organisation for whom executed,
approximate value of contract at the time of award, date of award and date of scheduled completion
of work, date of actual completion and final value of contract should also be given (marked annexure-
XI)
List of works in hand indicating description of work, contract value, approximate value of balance work
yet to be done and date of award (marked annexure-XII)
Tenderer who will quote the rate must have a local office at Kolkata. This is absolutely essential for day
to day supervision & coordination of the work at site.
All informations are to be fully authenticated & documented failing which the documents submitted will not be
accepted.
2
1.
2.
3.
4.
5.
6.
7
8.
9.
10.
11.
Contractors will be required to arrange for their own storing. Dismantled materials are to be carted
away from site at own cost and disposed of in conformity with Municipal regulations.
The quoted rates, are to include cost of all materials, labour and or any other material, all statutory
taxes, transport, handling delivery at site and installation, complete in all respect, as per drawing,
directions or instructions of Employer/Consultant. The quoted rates are also to include dismantling of
partitions, counters, old electrical wirings etc. and stacking serviceable materials and disposal of debris,
etc.
Prior approval of the Employer/ Consultant shall be obtained for colour and thickness of laminates to be
used in the work.
GENERAL TERMS & CONDITIONS
The tenderer are to visit the site and acquaint themselves with site conditions before quoting rates.
The arrangement for “ Wire Management " is to have prior approval of the Client.
The quoted rates shall remain firm during the entire currency of contract. No price variation for any
causes whatsoever, shall be entertained.
The time of completion shall be two (2) weeks from the date of placement of order.
The offer shall remain valid for acceptance for a period of 30 days from the date of submission of
offer.
The Employer reserves the right to themselves to accept or reject any or all offers without assigning any
reason therefor.
Payments will be made once on completion by the Employer within 15 days after certification of bill by
the Consultant 10% of the total payable amount is to be retained as retention money and will become
due for release after expiry of six months from the date of completion of the installation & subject to
satisfactory maintenance of the executed work.
Tenders addressed to Deputy General Manager, Bank of Baroda, West Bengal & Sikkim Region and
submitted at his office at BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt lake City, Kolkata : 700
091, by 3 P.M. on 05.04.2012, accompanied by Earnest Money amounting to Rs. 13,000/- by Bank draft
payable to Bank of Baroda and other documents as mentioned in NIT. Part 'A' of the tenders will be
opened at 4.00 P.M. on the same date.
3
SPECIFICATION OF MATERIALS FOR INTERIOR WORK
Sl.No. Description
1. Laminate
2. Ply & Block Board
3. Glass
4. False Ceiling & Accessories
5. Veneer
6. Textured Wall Paint
7. Glue
8. Locks
9. Aluminium Hardware Fittings Metako / Allen / Crown with ISI Mark
10. Brass Hardware
11. Floor Spring
12. Screws
13. Casters
14. Sliding Drawers / Channels
15. Furnishing Fabric
16. Leather Foam
17. PVC Flooring
18. Carpet
Efficient Gadjets
Durian / Century / Archid
ICI, Jenson & Nicholson / Asian paint / Berger
ICI, Spectrum, Heritage
Godrej / Secur / Yale
Marino / Greenlam / Century / Archid
Green / Century / Archid / Austin
Modi / Indo Ashahi / Float Glass India Ltd.
Brass Arts / Vijoy
Evrite Agencies Pvt. Ltd. / Nita Floor Spring
Nettle Fold
India Gypsum Ltd.
Earl Behari / Efficient Gadjets
Glamour or Favourite (Balla Industries)
Make (s)
Woven type "Harmony" range from "Vimal" or
equivalent
Bhor Industries or equivalent
Armstrong / Krishna / Premier
4
SPECIFICATIONS OF MATERIALS FOR ELECTRICAL WORK
Sl.No. Description
1. Switch fuse / fuse switch units (HRC) (32A TPN &
above)
2. Timer (TSQ 100)
3. Voltmeter & Ammeter
4. Voltmeter & Ammeter selector switches
5. Phase indicating lamp
6.
7. Capacitor
8. HRC fuses
9. Power Cable : XLPE
10.
11. HRC fuse base & carriers.
12. PVC terminals
13. 1.1 KV grade PVC insulated armoured
aluminium cable (ISI marked)
14. 1.1KV 660V grade PVC insulated & sheathed /
insulated copper wire & flexible cords (ISI
marked).
15. Moulded case circuit breaker
16. RCCB / ELCB
17. Switch fuse with rewirable fuses. (6A & 32A TPN)
18. Isolator
19. Changeover switch (on load type)
GE power / SIEMENS / L&T / Schneider
A. E. / IMP
Make (s)
L & T
NATIONAL/FINOLEX/ HAVELLS
KAYCEE / L & T
CROMPTON/SIEMENS
TATA LEVERT/NEUMERIC/ KIRLOSKAR
GLOSTER/INCAB/POLYCAB/CINOLEX
GE power / SIEMENS / L & T / SCHNEIDER
Vaishno / SIEMENS / ROSS controls
A E / KAPPA SEGC & CONTROLS / CONTROL
SWITCHGEAR
GE Power/SIEMENS/L&T/SCHNEIDEV
HAVELL’S / STANDARD
HAVELL’S / STANDARD
LEGRAND/ SIEMENS / L&T
ELMEX / ESSEN
KENBAR / HAVELLL’S / ELCON / HPL /
CONTROL & SWITCHGEAR.
UNIVERSAL / GLOSTER / NATIONAL / NICCO /
FINOLEX/HAVELL'S
L & T / SCHNEIDER/LEGRAND
5
Sl.No. Description
20. MCB distribution board
21. Distribution fuse board with rewireable fuses
22. Miniature circuit breaker / MCB type isolator
23. Contractors
24. Auxiliary contractor
25. 1/16 Amp Piano key type switch / flushed type
plug socket
26. 6/16 Amp modular switch / socket, module
plate & mounting M.S. / PVC box.
27. 300W, 2 module electronic regulator
28. Ceiling rose
29. Holder
30. Buzzer / call bell
31. Luminous indicating type buzzer with
cancellation push.
NATIONAL / HOMA / EQUIVALENT
32. Alarm bell.
33. G.I. pipe
34. Steel conduits (conforming to IS in all respects)
35. Black enamelled
36. Galvanised
BAJAJ / ANCHOR / NATIONAL / HOMA
KAY / EPP / ANCHOR / JJ
Good local make with minimum wall thickness of 3
mm. for 19 / 20 mm. and 25mm sizes & 2.5 mm. for
12mm. sizes
BEC / SUPREME / AKG
BEC / SUPREME / AKG
BST / BANSAL
KHERAJ / GETCO
KAY / EPP / ANCHOR / JJ
CPL (Genius) / ANCHOR (Roma) / CRABTREE /
MK
ANCHOR (Roma) / CRABTREE / MK
ANCHOR / PRECISION / SSK & RIDER
SIEMENS / L & T/BCH
SIEMENS / L & T
LEGRAND / SIEMENS
Make (s)
LEGRAND/ SIEMENS
HAVELL’S / BPC / BOSMA
6
Sl.No. Description
37. Non-metallic PVC conduit pipe
38. Compression type brass gland
39. Cable termination socket
40. Light fitting & lamps
41. Decorative/Ornamental /Chandelier / Light
Fittings
42. Ceiling Fan
43. Exhaust fan
44. Industrial type socket & top
45. Telephone wire
46. Telephone Socket
47. Network Cable
48. Contractors
49. STARTERS
Make (s)
L & T / SIEMENS
CROMPTON / POLAR / KHAITAN
NORTH WEST / CABTREE
CROMPTON / POLAR / KHAITAN
HAVELL’S / CROMPTON / LEGRAND
FINOLEX / RRK/NATIONAL
CRABTREE/MK
CROMPTON / POLAR / KHAITAN / EPC
FINOLEX or equivalent
DOWELL'S
WIPRO or equivalent
DOWELLS / JOHNSON / COMET
PLAZA / KALINGA/ PRECISION/AKG or
equivalent
7
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
1 GYPSUM BOARD FALSE CEILING
Providing and fixing in position dropped ceiling in two levels
including vertical surfaces in between two level of ceiling surface
with 12.5mm thick tapered edge gypsum board conforming to
IS 2095 including providing and fixing of framework made of
special sections power pressed from MS Sheet and galvani-
sed in accordance with Zinc coating 600 as per IS 277 and
costing of angle cleats of size 25mm wide x 16mm thick
with flanges of 22mm and 37mm at 1200mm center to center
one flange fixed to the ceiling with dash fastner 12.5mm dia
x 40mm long with 6mm dia bolts to the angle hangers of
25x25x5 mm of required length and other end of angle hanger
being fixed with nut and bolts to G.I. Channels 45mm x 15mm
x 0.9mm running at the rate of 12mm centre to centre to
which the ceiling section o.5mm thick botton wedge of 08mm
with tapered flanges of 26mm each having clips of 10.5mm at
450mm center to centre shall be fixed in a direction perpen -
dicular to G.I. Channel with connecting clips made out of 2.64
mm dia x 230mm long G.I. Wire at every junction including
fixing the gypsum board with ceiling section and perimeter
channel.
The perimeter of ceiling fixed to wall/partition with the help
of rawl plugs
at 450 mm center to center with 25mm long drive all screws
@ 230mm interval including jointing and fixing to a flush
finish of tapered and square edges of the gypsum board with
recommended filter, paper tapes, finisher and two coats of
primer suitable for gypsum board as per manufactures
specification and also include the cost of making openings
for light fittings grills, diffusers, cutouts made with frame of
perimeter channels of the Engineer-in-Charge but excluding
the cost of painting.
Rates to include cost of making openings for ceiling mounted
electrical/air-conditioning accessories as per instructions.
(The work to be carried out through authorized applicators of
M/s. India Gypsum Ltd.) 800 Sq.Ft.
2 FALSE CEILING (Armstrong)
Providing & fixing in position false ceiling in Armstrong
600 x600 mm x 15/16 mm Dune Supreme RH 99 Prima tile
with Tegular edge framework as specified by Armstrong Co.
with suspenders wherever required. Making cecessary
framework for A.C ducting, if any and cecessary cutouts for
diffusers and light fittings, taping and finishing to proper line
& level, including making grooves and trap doors for A.C 750 Sqft.
unjit in 18mm thick M.R. Grrade Plywood with Stainless Steel
hinges & locks with moulding 1" x 1" for edges including finishing
with White Plastic Emulsion Paint etc. complete in all respects.
(Note- Only the plan area will be measured for payment.
No extra payment will be made for cutouts, grooves
moulsings etc.)
INTERIOR WORKS OF PROPOSED UTTARPARA BRANCH, BANK OF BARODA AT UTTARPARA
I. SCHEDULE OF QUANTITES FOR FURNISHING & ALLIED WORKS
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
3 FULL HEIGHT SOLID PARTITION
Supplying and erecting Full height Opaque partitions ( from 8'6"
10ft. high) as per drawing and conforming to the following
specifications :
Basic Framework : Well seasoned Malayasian sal wood
sections, treated with two coats of wood preservatives, 50mm
x 50mm (minimum) at maximum 600 mm horizontal or
vertical spacing as per site conditions.Vertical Members shall
be suitably anchored and at ceiling level to ensure rigidity.
Skin Membrane : 2x6 mm thick BWR grade plywood on each
face with 4x6mm grooves formed at the top layer as per
drawings/instructions.
Finishing : 1.0mm thick laminate sheet of same or
combination shades as per instructions on both sides.
Skirting: 100mm high x 12 mm thick polished white or steam
beech wood skirting on both faces with NC lacquer in Matt finish.
Other specs same as Item no.3 230 SQFT
Quoted rates shall include all necessary materials,accessories
and also allow provisions for electrical/telephone/computer
wiring conduits and switch boxes, etc ( Materials of wiring
conduits and switch boxes shall be separately paid for.)
4 LOW HEIGHT PARTLY GLAZED WOODEN PARTITIONS
Supplying and erecting low height partlyglazed partition (varying from
1050 to1650 mm high) as per drawing and conforming to the following
specifications :
Basic Framework : Well seasoned Malayasian sal wood
sections, treated with two coats of wood preservatives,50mm
x 50mm (minimum) at maximum 600 mm horizontal or
vertical spacing as per site conditions.
Skin Membrane : (Opaque portion upto 900mm from floor
level with 2x4 mm thick BWR grade plywood on each face
with 4x4mm grooves formed at the top layer as per drawings/
instructions.
Glazing : 12 mm thick clear float glass fixed with continious
White or Steam Beech wood glazing beads of approved shape
( finished 35x25 mm) all around, polished & coated with NC
lacquer finish. The rate should also include cost of decorative
etching on one side of the glass.
Finishing : 1.0mm thick laminate sheet of same or
convination shades as per instructions.
Edge Moulds : All free top/end surfaces shall have polished
white or steam beech wood moulds of apprived shape ( from
80x 25mm sections) with LC lacquer in mat finish.
Skirting: 100mm high x 12 mm thick polished white or steam
beech wood skirting on both faces with NC lacquer in Matt finish.
Quoted rates shall include all necessary materials, accessories
and also allow provisions for electrical/telephone/computer
wiring conduits and switch boxes, etc ( Materials of wiring
conduits and switch boxes shall be separately paid for.) 290 Sq.Ft.
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
5 SOLID FLUSH DOOR
Supplying and fixing in position overall 37mm thick solid core
hot pressed phenol formaldehyde bonded approved flush door shutter
finished with 1.0mm thick laminate sheet of approved shade and quality
on both sides of the door shutter including cost of hardware fittings e.g.
mortice locks, brass hinges, door handles etc. of approved make
a) Average size of shutter (D1) : 3'-0"x 7'-0" 3 No.
b) Average size of shutter (D2) : 2'-6"x 7'-0" 4 No.
C) Average size of shutter (D3) : 2'-6"x 5'-6" 3 No.
6 WICKET GATE
P/F/F Wicket gate made up of 32mm flush door finished with 1mm wenge
color laminate. The door shall have SS finished door lock, heavy duty
brass hinges, SS handles, door stopper etc. as per schedule
The skirting shall be finished with 3” wide 1.00mm brushed SS laminate
Refer dwgs for details .Wicket gate have to match with the Low height
Partitions. 12 Sqft.
7 WOODEN PANELLING ON PILLARS
Wall Panelling / column encasing ( upto 2700 mm high ) works
as per drawing and conforming to the following specifications:
Basic frame work
Well seasoned Malayasian Sal Wood sections, treated with two
coats of wood preservatives, minimum 50x25 mm, at suitable
horizontal / vertical spacing not exceeding 600 mm c/c.
Skin Membrane:6 mm thick BWR grade plywood with 4x4mm grooves formed
at top layer as per drawing/ instructions.
Finishing:1mm thick laminate sheet of same or combination shades as per
instructions.
Skirting
100mm highx12mm thick polished white or steam beech wood skirting
with NC lacquer finish.
Quoted rates shall include all necessary materials, accessories
and labour and also allow provisions for electrical/telephone/
computer wiring conduits and switch boxes etc. complete with
necessary jacking /thickening of panels to accommodate conduits/ switch
boxes.(Materials for wiring conduits and switchboxes shall be separately paid). 380 Sqft.
8 Providing, fitting & fixing the cash counters & Cash cabin along
with partitions all complete:
Internal Size of the cash cabin :4'-6" to 5' (w) x 5'-6"(h) x 7'-0"(l)
a) Providing fixing & fixing 3' wide & 2'-6" high staff working top made of
18mm thick BWP block board of approved make finished with 1.0 mm
laminate of approved make & shade.
The customer transaction top shall be 1'-6" wide projecting 6"on the
customer side at a height of 1' above the staff working counter thus
making a total height of 3'-6". The customer top is made of 3/4" thk
Granite top(Black galaxy) placed on 18mm thick BWP blockboard
which is cut & shaped with edges round polished.
Below the working top/counter will be 1'-6" wide drawer unit consisting
of 3 nos. drawer on slide channels on one side & metallic CPU trolley
on the other side with key board tray with slide channels & foot rest
in between for each of the cash counters
Below the Transaction top the portion which is overlapping with
the working counter of 10" deep will be covered by 2 sets of
sliding shutters with a intermediate shelf with all locking arrangement
for keeping currency notes.
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
Both the staff working top & the transaction top is rested &
supported together by a front Apron or Double skin partition
There will be neccesary grooves between the two different
decorative laminates as shown in the detail drawing & as directed.
The counter will be provided with wire manager. The front portion
of cash cage above the transaction top(from 3'-6" to 5'-6" ht.)
will be provided with 2 no. of 12 mm thick float glass with a cut out
of 8" x 4" at the central bottom part of each of the transaction top. 15.75 Rft
8b) Cash Cage Side, Intermediate & rear Partitions with door
The intermediate/side/rear partition with doors between
Cash Cabins will be of same specification as Partly glazed
Wooden Partition of Item No. 2 upto 5'-6" height with the
exception that the opening above 3' 6" height upto 5'-6" is to be
covered by the strips of 12mm thk.glass fixed. All exposed edges
of the BWP ply & blockboard are to be finished with 12 mm thk.
Rubber wood lipping which are to be polished as directed.
Provision for extra wooden frame work of same section
for intermediate glazing to be included in the rate.
There will be provision for small trays/windows for transfering
of small copy either from the banking area to the cash cabins
or between the cash cabins as directed by the architect.
The cost of all fittings of the door :handle locks,aldrop handles,
door closer, night latch all of appoved make of the doors
wherever required in the cash section to be included. 300 SQFT.
9 EXECUTIVE WORKSTATIONS
Providing, fixing and fitting in position free standing work station
made of 19 mm thk. BWP Ply + 1.0 mm. Laminate of
approved make and colour for the table top, sides & front apron
The table is supported on the left side by a 1'-6" wide &
2'-0" deep drawer unit consisting of a tea tray, one drawer
& a shuttered cabinet all in 1.0 mm thk. laminate finish and Ply partition
on the right side . The table is provided with a readymade metallic CPU
Holder with swivel facility, (CPU HL SW / INNOFITT systems or similar)
& readymade key board drawer of engineering Plastics (KD 575 P MT/
INNOFIT System or similar) shall be suspended below the table top.
Quoted rates shall also include cost of polished white or steam beech wood
moulding ( finished 40x20 mm section ) to edges of table top; polished
white or steam beech wood lipping (6mm thick) to free edges of block
board/ plywood surfaces; approved drawer - slides, concealed type
auto-closing shutter hinges and locks with keys in duplicate; other
necessary hardware and accessories including satin finish S.S. handles,
knobs and wire managers etc. of approved quality & the table top is finished
with 5mm thick glass.
A) Approx. size of 1800 x 750 x 750 mm 1 No.
B) Approx. size of 1500 x 750 x 750 mm 4 No.
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
10 SIDE CREDENZO
Providing & fixing The side unit is of size 3' (L) X 1'-6" (W) X 2'-6" (H)
consisting of a top row of two sets of 4" high drawers with
cabinets below with sliding shutters, made of 19mm thick
BWR grade block boards all finished in 1.0mm thk.laminate.
Exposed block board surfaces shall be finished with 1.00mm
laminate sheet of approved shade and make. Inner faces of
sliding shutters shall be polished in approved color.
Free edges of block board shall have polished white or steam
beech wood half round moulds ( out of 20 x 20 mm sections).
Inner faces of cabinet units shall be polished in approved shade
quoted rates shall include cost of necessary hardware , Viz
handles, locks with keys in duplicate, etc. 2 Nos.
11 BACK OFFICE WORKSTATION (Size: 5'(l) x 2'-6" (w) )
Providing & fixing top , side & front with 19 mm BWR block board finished
with 1.0 mm laminate.Table top edge will have 37mm thk white beach wooden
moulding.75mm x12mm thk white beach / white cedar skirting(as per design)
with natural polish should run along with entire bottom length of table front.The
table will have provision for keyboard tray ,mouse tray with pad ,CPU Trolley
,foot rest with individual drawer & storage with proper locking system.
The storage complete with SS handle, brass hinges, multi lock & other
necessary hardware including wire manager.
All internal surface is to be finished with synthetic enamel.paint. 3 NOS.
12 Writing Ledge cum cheque drop- & Suggestion box:
P/F/F Cheque writing tables made of 1 no.19mm plywood shelf 3' (w) x
1' (d) x 6"(h) which is finished with 1mm thick Laminate on all exposed
surface. The shelf is fixed with two intermediate 8mm thk glass
partition fixed with D brackets for keeping withdrawal/deposit forms.
The table top shall be of 12mm thick plain glass fixed with SS studs
on the shelf.
Below the shelf after a 6" gap is place a cheque drop box of size :2'x
2'x 6", with 1" wide slit for inserting cheques made of 19mm thk BWP
blockboard, 1mm laminate finished.
Item is to be completed in all respects as per design, direction of Architect. 1 no
13 Low height Filing cabinet : Providing and fixing and fitting 1'-6" deep &
upto height of 3ft made of 18mm BWP blockboard with intermediate shelves.
The back of the cabinet to be made of 6mm thk.BWP ply with a BWP ply with a
ply skirting/base of 100mm high.
There will be one horizontal division and vertical dividers of same block board at
approx. 3ft.apart with sliding shutters. All exposed surfaces & the shutters are
finished with 1.0 mm thk.decorative laminate of approved make & shade.
Cost of all fittings like brass hinges, godrej locks,magnetic hinges, godrej locks,
magnetic catches, steel matt finish "D" type handles shall be inclusive.
Skirting
100mm highx12mm thick polished white or steam beech wood
skirting with NC lacquer finish. 130 Sqft
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
14 MAIN ENTRANCE DOOR CUM FIXED GLAZING
Providing & fixing in position Twin stile door made of 40 mm
thk well seasoned teak wood of top & bottom stiles, fixed
portion with 8 mm thk. Clear float glass & openable portion
with double shutter made of 12 mm thk clear float glass with
necessary hardware fixtures of approved make & design,
viz. double action ISI marked floor springs, on which the
shutters are pivoted at the top & bottom, brass flushbolt,
satin finish stainless steel decorative tubular handles on
both the faces,(Dorset or equivalent approx. 300mm long)
complete as per direction. Rate should include etching of the
Bank's logo & emblem on the Glass in the size & design as
approved by the architect. Wooden surface should be
polished in approved shade N.C. Lacquer in matt satin finish.
a) Openable Shutter 25 SQFT.
15 WINDOW SCREEN
Providing, fitting in position 100mm vertical blinds made of
best quality PVC coated polyester fabric of approved make
& shade & to be tailored to the size of the window. 200 Sqft.
16 Display Panels
Providing & fixing in position frameless double acrlyic tran-
sparent sheet 2'-6" (l) x 1'-6" (w) mounted with mirror screws
/nuts on the wall along with all accessories complete for
display of bank's schemes/posters/notices inserted on it. 2 Nos.
17 PIN-UP NOTICE BOARD
Providing, fitting in position pin-up board made of soft
cork board finished with the fabric as approved,matching
with the colour scheme of the banking hall with a R.W.
moulding all around the edges. 12 Sqft.
18 WOODEN COUNTER FOR CANTEEN
Providing & supplying 1' 6" wide wooden counter placed against wall
made of 18mm thk. BWR Block board finished with 1mm thk. Decorative
Laminate & badam wood lipping standing on wooden posts
and finished with polish 10 RFT.
20 TEXTURED WALL FINISH
Providing & applying texture wall paint(roller/spray)as per
manufacturer's specification of approved colour & brand
at all heights in the customer lobby as instructed. 450 SQFT
21 PLASTER OF PARIS CORNICE
Providing and fixing Plaster of paris Cornice(out of 65x65 mm sections)
at junctions of false ceiling, walls and at other locations. 190 Rft.
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
22 COLLAPSIBLE GATE
Collapsible gate with 40mmx 40mm x 6mm tee as top &
bottom guide rail, 20mm x10mm x 2mm Vertical channels
100mm apart in full stretched position 20mm x 5mm flat
as collapsible bracings preferably revetted & washered I/c
locking arrangements, fitted & fixed in position with lugs
set in cement concrete(1:2:4) & I/c cutting necessary holes,
chasing etc, in wall, floor etc. & making good damages
complete in all floors at any height. 40 Sqft
23 TOILET REQUISITES
a. Providing fiting & fixing C.P towel ring complete with
C.P screws and fittings etc. 2 Each
b. Providing fiting & fixing PVC Liquid Soap dispenser
with C.P screws etc. complete 2 Each
c. Providing fiting & fixing polished mirror of superior glass
aproved quality complete with 6 mm asbestos sheet
ground fixed to wooden cleat with C.P brass dome
shape screws washer etc. complete 550 mm x 450 mm 2 Each
TOTAL
Sl No. Item Description Qty. Unit Rate Amount
1.0 SWITCH/ MCB
1.1
1.1.1 63A FP SFU with HRC fuse links as main incomer with cable gland entry box. 1 Each
1.1.2 32A DP SFU with rewirable fuse links for Generator supply. 1 Each
1.1.3. 40A DP MCB Isolator with MS box for controlling LDB at exit gate. 1 Each
1.1.4 32A DP MCB, 10KA (for UPS at Branch & ATM) 6 Each
2.0
1. Incomer: 63 A, 3 Pole, 25 KA MCCB with solid Neutral - 1 NO.
2. Outgoing:
16 / 20 A SP MCB " C " Series - 12 NOs. (For A.C. & Power points) `
40 A 4P MCB - 6Nos.(For Gen., LDBs, UPS, ATM)
3. Ammeter, Voltmeter, Selector Switches, CTs.,AE / Kappa make
4. Protective fuses for Volt Meter & Ammeter.- 3 nos
5. LED indicatore - 6 nos.
6. 40A 4 pole on- load CO switch - 1 no, Havell's Euro / HPL Socomac make. 1 Set
3.0 DISTRIBUTION BOARD
3.1.1 LDB: For Branch
i) Incomer- 1 No- 32A 2P MCB(10KA)
ii) Outgoing-10 nos. -6A/10A SP MCB(10KA) 1 Set
3.1.2 CDB:For Branch
i) 1 no - 32A DP MCB(10KA)
ii) 2 nos. - 10A SP MCB(10KA)
iii) 6 nos. - 6A SP MCB(10KA) 2 Set
3.1.3 LDB: For ATM
i) 1 No- 40 A DP Isolator
ii) 2 Nos. 10 A SP MCB 1 Set
iii) 1 No. 32 A SP MCB for glow sign
3.1.4 UPS DB:For ATM
i) 1 no - 25A DP MCB(10KA)
ii) 4 nos. - 10A SP MCB(10KA) 1 Set
Supply and installation of Main Electrical Panel, front attending wall
mounted ,cubicle type compermentalised made out of 14 SWG CRCA
sheet with power coated paint , GI earth bar etc comprising of the
following:-
Supply & erection of 230V SPN Wall mounting DB housed in SPN double
door DB box consisting of the following:-
II. SCHEDULE OF QUANTITES FOR ELECTRICAL WORKS
INTERIOR WORKS OF PROPOSED UTTARPARA BRANCH, BANK OF BARODA AT UTTARPARA
Supply & erection of 415V/230V equipment individually on wall housed in
MS enclosure with metal front cover for the following:
Sl No. Item Description Qty. Unit Rate Amount
4.0 DISTRIBUTION CABLE / WIRE
4.1
4.1.1 35 Sq mm 4 core Al with 2 nos 10 SWG GI wire 40 Mtr
4.1.2 6 sq mm 3 core Al with 2 nos 12 SWG GI wire 70 Mtr
4.1.3 2.5 sq mm 2 core CU for UPS Plate Earthing 50 Mtr
4.1.6
15 Mtr
( Meter loop connection with Main SFU & Busbar)
4.1.7
50 Mtr
4.2
4.2.1 35 Sq mm 4 core Al 4 Each
4.2.2 6 sq mm 4 core Al. 14 Each
4.2.3 4 sq mm 2 core CU 10 Each
5.0 A.C. POWER POINT WIRING
5.1.1
6 Each
5.1.2
6 Each
6.0 16A RAW POWER OUTLET POINT WIRING
6.1
2 Each
Wiring for Power outlets from DB with 1.1 KV grade 2x 2.5+1x1.5 PVC insulated
copper conductor wire (FR) through suitable size BEMS pipe /conduit
complete with 1 no 6/16A socket with 16A control switch in suitable size
modular box with front plates ( Cabtree Legrand), junction box, circular box
elbows etc and all other accessories surfaced on wall above false ceiling and
concealed by chase cutting on wall below false ceiling & making connection
complete. (Maximum 2 nos. sockets cluster in one circuit connecting by
looping method).
Supply & lay 1.1 KV grade PVCA AL/CU cable on wall having MS /HDP pipe
protection near floor level and clamping as required for the following:-
4 nos. 25 sq. mm. CU flexible wire through GI flexible pipe complete with end
termination with CU sockets.
4 sq mm 2 core CU with 1 no.12 SWG bare copper wire for ATM DB supply to
be drawn from Branch Main Electrical Panel
Making end termination of 1.1 KV grade PVCA Al/CU cable with supply of cable
end box , brass Gland, CU crimping socket & jointing materials as required for
A.C. power point wiring from PDB with 1.1KV grade 2 nos. single core 4.0 sq.
mm + 1 no. 2.5 sq mm ( Green colour for Earthing) PVC insulated copper
conductor wire (FR) through suitable size BEMS pipe surface on wall / ceiling
surface above false ceiling and concealed by chase cutting on wall below false
ceiling with all wiring accessories. The work includes supply & fixing by chase
cutting on wall, North West /Cabtree make Starter 11-18A (MS housed) unit
with 16A socket & matching 16A Plug top complete with all interconnections for
1.5 and 1Ton ACs.
A.C. power point wiring from PDB with 1.1KV grade 2 nos. single core 4.0 sq.
mm + 1 no. 2.5 sq mm ( Green colour for Earthing) PVC insulated copper
conductor wire (FR)through suitable size BEMS pipe surface on wall / ceiling
surface above false ceiling and concealed by chase cutting on wall below false
ceiling with all wiring accessories. The work includes supply & fixing by chase
cutting on wall, North West /Cabtree make Starter 18-25A (MS housed) unit
with 25A socket & matching Plug top complete with all interconnections for 2
Ton ACs.
Sl No. Item Description Qty. Unit Rate Amount
7.0
7.1.1
290 Mtr
7.1.2
80 Mtr
7.1.3
40 Mtr
7.1.4 40 Mtr
7.1.5 1X 6 SQMM CU wire for Earthing 50 Mtr
8.0 POINT WIRING:
8.1
having control board with modular switch mounted on suitable front plate and
housed in recessed MS box, surfaced on wall above false ceiling and concealed
by chase cutting on wall below false ceiling &
making connection complete.
(Power for ATM lights points to be taken from ATM UPS supply)
8.1.1 One Light controlled by 6A switch 21 Each
8.1.2 Two Light controlled by 6A switch 15 Each
8.1.3 Three Light controlled by 6A switch 2 Each
8.1.4 Exhaust Fan point with 6A switch 3 Each
8.1.5 Bracket fan point with 6A switch 19 Each
8.1.6 12 Each
8.1.6 5 Each
8.1.8 Call bell point with bell push and bell (for manager's Chamber). 1 Each
Modular type 6A switch, 1 no. 6A 5 pin socket point mounted on suitable front
plate on light / fan switch board.
(2X2.5 +1x1.5) sq. mm. to be drawn from Main Elec. Panel of Branch directly to
ATM LDB
Supply draw and connect 1.1 KV grade PVC S/C multistrand CU wire FR
grade in suitable BEMS pipe/ conduit & accessories including wall cutting
for concealing in wall below false ceiling & repairing as required for the
2X4 + 1X 2.5 sq mm. (Glow sign supply, UPS & LDB DB supply, UPS incoming
/ outgoing supply, ATM AC supply).
3 x 1.5 sq mm (Drawn from ATM room CDB to Router/Server room outlets to
provide UPS power incase of failure of Branch UPS) and for Call bell point at
the entrance.)
3X1.5 sq. mm. to be drawn from Branch CDB up to ATM power outlet point to
provide UPS power incase of failure of ATM UPS.
Supply & wiring with 3x1.5 sq. mm 1.1 KV grade PVC S/C multistrand CU
wire (FR) in suitable size BEMS pipe/conduit & accessories
The point wiring also include circuit wiring with 1.1 KV grade 2 nos. single core
2.5 sq. mm +1 no. single core ( green colour for Earth) PVC insulated flexible
copper conductor wire through suitable size BEMS pipe/ conduit from DB to
Switch board, interconnection and mending good all damages to original finish.
(Max.8-10 points or 700- 800Watts per Circuit is allowed).
Modular type 6A switch, 1 no. 6A 5 pin socket point mounted on suitable front
plate on separate switch board other than light / fan switch board. (Power to be
tapped from nearest S.B/ LDB).
Sl No. Item Description Qty. Unit Rate Amount
9.0 COMPUTER POWER OUTLET CLUSTER POINT WIRING
9.1
9.1 1 nos.- 16A modular type switch.
3 nos. - 6/16A 5 pin modular type socket
1 each no. - Front plate & MS box.
( for Each Table & counters supply from branch UPS, 12 Each
for ATM M/C supply from ATM UPS)
10.0
1 no. - 16A modular type switch.
3 nos. - 6/16A 5 pin modular type socket
1 each no. - Front plate & MS box.
1 Each
11.0
1 no. - 16A modular type switch.
3 nos. - 6/16A 5 pin modular type socket
1 each no. - Front plate & MS box. 1 Each
12.0 FAN & EXHAUST FAN
12.1
19 Each
12.2
3 Each
13.0 Call Bell
1 Each
14.0 LIGHT FITTINGS
14.1
a) PHILIPS make FBS 430/236 HF 1X36 W FTL (T8) LAMPS 15 Nos.
fixing on reccessed ceiling with lamp
b) PHILIPS make FBS 285/218 HF 1X18 W PL (T8) LAMPS 6 Nos.
fixing on reccessed ceiling with lamp
c) PHILIPS make FBH 150/118 HF 1X36 W PL (T8) LAMPS 20 Nos.
fixing on reccessed ceiling with lamp
Supply, erection and connection of 225 mm 1400 rpm, 230V Heavy duty
exhaust Fan with wire guard net including wall cutting and finishing.
Supply and fixing of call bell with modular type push complete with plate & box
to be fixed at the entrance gate.
Computer socket outlet cluster point wiring with 1.1KV grade 2x 2.5 + 1x1.5 sq.
mm. PVC insulated flexible copper conductor wire(FR) through suitable size
BEMS pipe/conduit with all accessories up to connection of 2/3 nos. sockets
cluster in one circuit connecting by looping method. The work includes supply
and fixing of sockets outlet cluster components as detailed below:-
Supply and erection of the Branch UPS power outlet point from ATM UPS
supply as detailed below:-
(For Branch Router and Rack supply from ATM UPS with 3x1.5 sq. mm.
wire as detailed in item sl no 7.1.2).
Supply and erection of the ATM power outlet as detailed below from
Branch UPS supply:-
(For ATM M/S supply from Branch UPS with 3x1.5 sq. mm. wire as detailed
in item sl. no 7.1.3).
Supply, erection and connection of 400 mm 230V oscillating type wall mounted
bracket Fan.
Supply, erection and connection of fluorescent / compact fluorescent / mini
halogen fitting with lamp , ballast / Transformer and other accessories for the
following:-
d) Philips make TMC 300/136, 1 x 36 watt TL lamps fixing on surface 16 Nos.
ceiling with lamp
Sl No. Item Description Qty. Unit Rate Amount
15.0 TELEPHONE CABLE
15.1
30 Mtr
16.0 TELEPHONE POINT
16.1 5 Each
16.2
5 Each
16.3
2 Each
17.0 EARTHING
17.1.1
2 Each
17.1.2
1 Each
17.1.3 3 Each
18.0
18.1.1 With (25x6) mm GI flat 1 Each
18.1.2 With (25x3) mm CU flat 1 Each
19.0 Supply and lay GI flat for earthing underground /on wall including
connection for the following:-
19.1.1 (25x3)mm GI flat 30 Mtr
20 Charges for all Liason Works in connection with arrangement of 1 job
Electric Supply through the Local Electricity Authority (Mandatory
Charges shall be Paid by the Bank)
Total Amount:
Supply and election Earth station with 600 x600x3mm CU. Plate with earth strip
/ wire connecting arrangement including excavation and back filling with 25 mm
dia GI pipe for watering.( for UPS Earthing)
Supply and erection of masonry pit for each Earth station having CI/RCC
inspection cover.
Supply and erection of earth bus on wall ( min. length 0.3 mtr.) on
insulator with drilled holes on the bus with GI bolt , nut , washer etc for
the following:-
Supply, lay and connect PVC insulated CU conductor and armoured 10 pair
Telephone cable for the following:-
Telephone point wiring with 2 pair PVC insulated CU conductor (0.5mm)
telephone wire drawn through BEMS pipe/conduit
Supply and erection of modular type telephone outlet RJ11 mounted on suitable
front pale housed in recessed MS box.
Supply and erection of 10 pair telephone terminal box (Krone type housed in MS
box).
Supply and erection of earth station with 50 mm dia. GI pipe 3 Mtr. Long with
earth strip connecting clamp at the top including excavation and back filling.
(For equipment earthing).
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
Providing & placing in position:
1 EXECUTIVE HIGH BACK UPHOLSTERED CHAIRS FOR
BRANCH MANAGER (METHODEX MAKE) 1 NO.
2 EXECUTIVE MEDIUM BACK UPHOLSTERED CHAIRS FOR
OFFICERS (METHODEX MAKE) 2 NOS.
3 UPHOLSTERED COMPUTER OPERATOR'S CHAIR (METHODEX MAKE) 8 NOS.
4 UPHOLSTERED VISITORS' CHAIRS FOR OFFICERS (METHODEX MAKE) 7 NOS.
5 BLACK POWDER COATED TANDEM MULTI SEATER
FOR CUSTOMER WAITING AREA OF APPROVED MAKE/BRAND
Three- Seater 3 NOS.
TOTAL
INTERIOR WORKS OF PROPOSED UTTARPARA BRANCH, BANK OF BARODA AT UTTARPARA
III. SPECIFICATION OF LOOSE FURNITURE WORKS
SL. AMOUNT
I
II
III
TOTAL
LOOSE FURNITURE
INTERIOR WORKS OF PROPOSED UTTARPARA BRANCH, BANK OF BARODA AT UTTARPARA
FOR BANK OF BARODA
ABSTRACT
PARTICULARS
FURNISHING & ALLIED WORKS
ELECTRICAL WORKS