Barber & Wilsons catalogue

T R A D I T I O N A L & C O N T E M P O R A RY TA P S

B RO C H U R E W I T H D I M E N S I O N A L D R AW I N G SA N D R E C O M M E N D E D R E TA I L P R I C E L I S T

( E X C L U D I N G VAT )

J U LY 2 0 1 0

By Appointment toHer Majesty Queen Elizabeth II

Manufacturer of Kitchen & Bathroom Taps & Mixers Barber Wilsons & Co. Ltd.

Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page fc1

1890’s (GA) 1890’s with

ceramic disc

(GCD)

Regent with

china lever

handles

(RFC)

Contents

Traditional Page No.Basin Fittings 1-3Bath Fittings 4-10Shower Fittings 11-19Waste & Cistern Levers 20Kitchen 21-23Mastercraft 24-28

Q Range Page No.Basin Fittings 29-30Bath Fittings 31-33Accessories / Showers Arms 34Concealed Thermostats 35Traditional Spares 36-39General Information 40-41

Most of the traditional fittingsshown in this brochure are fromthe 1890’s (GA) range whichhave the original exposed topworks, with traditional rubbertap washers.An alternative to this style is the Regent (R) range with "easy-clean" shrouded head parts. Thecode numbers for the Regentrange are the same as the 1890’s

range but are prefixed with theletter ‘R’instead of ‘GA’.For most Regent and GA styleswe can now supply ceramic discheadworks. Regent ceramic disc(RCD) and GA ceramic disc(GCD). These give traditionalstyling with state of the artceramic disc internals.

The Mastercraft (MC) range isbased on our original 1930’sdesign and incorporates a stylishArt Deco theme of hexagonalcapstans, shrouds and spouts.Again, the code numbers are the same as the 1890’s range but are prefixed with the letters ‘MC’ instead of ‘GA’.Mastercraft is not available with ceramic disc headworks.

Throughout this catalogue taps which are available with ceramic discs are labelled withthe suffix CD.

Traditional taps in six styles

Contemporary taps:Q1 and Q2

Regent with ceramic

disc (RCD)

Regent (R) Mastercraft (MC)

Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page fc2

2123 (GA shown. Also available as 135.34 142.24 179.02 152.92R, GCD & RCD)1⁄2" basin taps with 3" nose (pair).

As above but RFC style. 198.64 208.33 248.61 223.96

2124 (GA shown. Also available as R, 135.34 142.24 179.02 152.92GCD & RCD)1⁄2" basin taps with 4" nose (pair).


2125 (GA shown. Also available as 204.49 213.38 268.55 229.39R, GCD & RCD)1⁄2" basin taps with 5" nose for use with inset basins (pair).


6470 GA shown. Also available as R, GCD & RCD 220.31 229.30 281.90 246.50Monobloc basin mixer with pop-up waste.

6471 With plug and chain waste and chain boss on body. 220.31 229.30 281.90 246.50

6472 With plug and chain waste and chain stay. 220.31 229.30 281.90 246.50

6475 Monobloc basin mixer with pop-up waste. 232.00 241.00 295.00 257.00

6476 220.31 229.30 281.90 246.50With plug and chain waste to replace pop-up.

1

Basin Fittings Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

Prices excluding VAT

100(4”)

35(13/8”)max

12mm DIA COPPER

125(5”)

300(12”)

15^64

(21/2”)

45(13/4”)max

6475 MONOBLOC BASIN MIXER

6470 MONOBLOC BASIN MIXER

Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 1

6450 (GA shown. Also available as R, RCD & GCD) 332.47 348.63 383.17 374.773-hole basin mixer with pop-upwaste, 115mm nozzle.

6455 As above but 140mm nozzle. 332.47 348.63 383.17 374.77

6451, 6456 332.47 348.63 383.17 374.77With plug and chain waste and chain boss on nose.

6452, 6457 With plug and chain waste and chain stay. 332.47 348.63 383.17 374.77

As above but RFC style 418.94 439.25 482.77 472.19

6453 (GA shown. Also available as R, GCD & RCD) 332.47 348.63 383.17 374.773-hole basin mixer with swivel swanneck filler.


6454 (GA shown. Also available as R, GCD & RCD) 369.93 384.48 423.45 413.33Wall mounted nozzle with valves. Waste not included.


Finished wall surface

1⁄2" Regent Deck Valve

3⁄4" Nozzle Standard203mm (8")projectionc/w flow straightener

Flexible hose 300 (12")

40 (19⁄16")Max wallthickness

104 (4") Deck Valvedepth


Bronze

2

150 (6”) min - 250 (10”) max

114/140 projection(47/16 - 51/2)

29 hole (13/16)

1/2” BSP

Flexible hose

34 hole (15/16”)

300 max (12”)

40 max(19/16”)

150min (6”) - 250max (10”)

150mm (6”)

3 holes 29 (13/16”)

1/2” BSP

137mm (53/8”)

260mm (101/4”)



150 (6”) min - 250 (10”) max

3

6459 (Regent shown. Also available as 332.47 348.63 383.17 374.77GA, GCD & RCD).3-hole basin mixer with pop-up waste and swan-neck filler.


6008 (Regent shown. Also available as 370.89 382.25 427.51 410.90GA, GCD & RCD).Retractable hairdressers’ basin mixer with flexible hose and shampoo spray. Rests in a flush fitting independent holder. Incorporating single check valve to comply with Water Byelaws.


1870 (GA shown. Also available as R) 248.78 256.41 298.53 275.66Monobloc bidet mixer for single hole rim. With pop-up waste and adjustable nozzle.


1875 (GA shown. Also available as R, 248.78 256.41 298.53 275.66GCD & RCD)Monobloc bidet mixer for single hole rim. With pop-up waste and adjustable nozzle.


Bronze


1875 MONOBLOC BIDET MIXER1870 MONOBLOC BIDET MIXER

72(227/32”)

35(13/8”)max

92(38/8”)

300(12”)

12mm DIA COPPER

28(13/32”)

45(13/4” max)

30^


4300 (GA shown. Also available as R, 645.28 677.55 806.32 728.38GCD & RCD) Bath/spray mixer for bath rim mounting. Incorporates single check valve to comply with Water Byelaws.

4308 645.28 677.55 806.32 728.38As above but with unions for wall fixing.

2134 (GA shown. Also available as R, 179.87 189.54 217.44 203.76GCD & RCD)3⁄4" bath pillar tap with 4" nose (pair).

900 (GA shown. Also available as R) 208.36 218.78 275.41 235.203⁄4" globe tap for bath fixing (pair).

Bath Fittings Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

4

B

Note: Due to thetraditional shape of thismixer a short intervalmust be allowed fordraining down purposesafter turning the taps tothe off position.



5

3308 (GA shown. Also available as R, 370.04 395.76 478.22 425.44GCD & RCD) Bath filler with wall unions.

3300 370.04 395.76 478.22 425.44As above but for rim mounting.

3480SET (Regent shown. Also available as GA, GCD & RCD) 468.86 493.35 535.32 530.363⁄4" deck bath valves and nozzle to form bath filler.

3480DV 272.90 286.92 314.86 308.423⁄4" Deck valves. Pairs.

TT3480DN 146.94 157.42 171.42 169.231" deck bath nozzle - 8 3⁄4" projection.


Bronze

250 (97⁄8") (as supplied)

can be reduced to 170 (611⁄16") on site.


Important note regarding installation: see page 41


3484SET (Regent shown. Also available as GA, GCD & RCD) 713.08 743.18 876.18 798.92A 4 hole deck set comprising hot and cold valves, diverter/ nozzle, and pull up hand spray. Incorporates single check valve to comply with Water Byelaws.


4309RT (Available as GA, R, GCD & RCD) 1766.93 1924.40 2263.83 2068.75Bath/spray mixer with 1" (25mm) floor standards and bracing kit and 3400T waste.

4310RT (Available as GA, R, GCD & RCD) 1941.91 2151.85 2505.22 2313.23Bath/spray mixer with 2" (50mm) floor standards and bracing kit and 3400T waste.

4311RT (Available as GA, R, GCD & RCD) 1899.24 2109.83 2456.25 2268.08Bath/spray mixer with 2" (50mm) floor standards and bracing kit and 3400EXP waste.

4312RT (Available as GA, R, GCD & RCD) 1724.97 1878.90 2214.79 2019.85Bath/spray mixer with 1" (25mm) floor standards and bracing kit and 3400EXP waste.

TT3400T 689.29 759.27 881.71 816.18Bath waste, overflow to trap and 42mm tube.

TT3400EXP 683.37 753.19 835.83 809.66Bath waste, overflow to flow, trap and 42mm tube.

TT3400DP 206.44 241.41 279.91 259.52Bath waste, overflow to floor.

Note: The above assemblies are available with bath fillers to replace the bath/spray mixers and are then designated 3309-3312 (prices on application).


Bronze

6

290 (113⁄8")(as supplied)

can be reduced to210 (81⁄4") on site

TT3400T TT3400EXPTT3400DP

R4310




TT3425/42 266.70 274.69 329.22 295.30Floor standards for under roll.

PS55 506.47 545.83 615.80 586.7942mm trap complete with waste plug and chain.

PS56 92.71 96.21 101.48 103.4542mm elbow (to take trap outlet through floor).

PS57 45.50 59.52 80.47 63.9442mm x 300mm length of tube.

PS57A 33.24 36.75 41.98 39.49Flange plate for 42mm diameter tube.

TT2"3425 pair 398.91 475.92 545.83 511.6350mm floor standards.

TT2"679 178.33 207.11 233.08 222.67Bracing kit to suit 50mm floor standards only.

TT1"3425/679 482.11 535.08 638.58 575.19Pair 25mm. Floor Standards with Bracing Kit.


Bronze

7


4310 (50mm Standards)


4309RT (25mm Standards)




Bronze

8

NOTE: Assembly includes all compression fittings but not tubes

270 (105⁄8") (as supplied)can be reduced to 190(71⁄2") on site.


180

(71⁄ 8"

)


TT3450 SET 357.01 376.52 432.10 404.773/4" Concealed 3 hole bath filler(incorporates wall stops, nozzle, compressiontee and connections).

TT1250WS (Also available TCD) 219.96 249.94 271.59 268.691/2" Wall stops (pair).

TT3450WS 233.81 246.38 283.17 264.853/4" Wall stops (pair).As above but RFC style 292.26 307.98 353.96 331.06

TT3450WN 90.96 97.99 117.24 105.311" Wall nozzle.

TT3452SET 668.80 729.61 832.66 784.333/4" Concealed 5 hole bath/shower mixer (incorporates wall stops, nozzle, divertor, compression fittings, back inlet, 17 1/2" (450mm) shower arm and 5" rose).

Note: For alternative size shower arms and roses, please refer to page 18

Flange Dia 75 (3")



TT3450WD 164.43 171.42 188.97 184.293/4" Wall diverter.

4306 (GA shown. Also available as R, N/A 774.31 946.01 832.41GCD & RCD)Bath/spray mixer with slider bar. Wall mounting. Incorporates single check valve to comply with water byelaws.

4305 N/A 774.31 946.01 832.41As above but for deck mounting.Incorporates single check valve to comply with water byelaws.


Bronze

9

This diverter must be removed fromthe pipework for maintenance.

750 (29.5”) APPROX

Slider bar availableseparately. See page 17.



10

4302 (GA shown. Also available as R, GCD & RCD) 720.99 765.52 849.20 822.90Bath/shower mixer. Wall mounting.

4301 720.99 765.52 849.20 822.90As above but for deck mounting.

Above items are supplied with 17 1/2" (450mm) shower arm and 5" rose.

Note: For alternative size shower arms and roses, please refer to page 18.


Bronze

‘B’ RISER KIT FOR 4302

Short – Max 585(23) Min 530(20 3/4) Long – Max 755(29 3/4) Min 700(27 3/4)

Adjustable

‘C’ RISER KIT FOR 4301



11

6000 (GA shown. Also available as 524.44 551.66 651.06 593.05R, GCD & RCD)Manual shower mixer with handspray and supporting cradle. Incorporates single check valve.

5300 (GA shown. Also available as R, GCD & RCD) 543.66 572.91 653.96 615.87Manual shower mixer with fixed riser.

Manual shower mixer with fixed riser, 17 1/2" (450mm) shower arm and 5" rose.


PS53 681.42 702.52 773.72 755.20Exposed Thermostatic mixer valve onlyand inlet bends.

Shower Fittings Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

Thermostatic Shower Fittings Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

7



53 BA

PS53 CU 681.42 702.52 773.72 755.20Exposed Thermostatic mixer valve onlyand inlet bends with compression elbowssuitable for 15mm dia. copper tube.

53BA (Regent shown, also 881.11 907.49 1026.25 975.57available as GA)Thermostatic bath filler.

Thermostatic Shower and Specification Polished Chrome Inca/ Satin Chrome/Bath filling valves Brass /Nickel Weathered Satin Nickel

Bronze

EXPOSED THERMOSTATIC SHOWER COMPONENTS

TT56001 x PS53-Exposed Thermo Valve1 x PS49-Riser, Wall Elbow, ShowerArm & 125mm Rose

TT57001 x PS53-Exposed Thermo Valve1 x TT57SH Control Valve "Shower"1 x PS49-Riser, Wall Elbow, ShowerArm & 125mm Rose

TT57021 x PS53-Exposed Thermo Valve1 x TT57SH-Control Valve "Shower"1 x TT57SP-Control Valve "Spray"c/w PS86A x 3⁄4 F x 1⁄2 M Adaptor1 x PS89A-Thermo.valve Outlet1 x PS49-Riser, Wall Elbow, ShowerArm & 125mm Rose1 x PS03-Handspray & Flex1 x PS50-Wall Mounted Cradle

TT57041 x PS53-Exposed Thermo ValveTT57SH-Control Valve "Shower’’c/w 3⁄4 Compression Nut1 x TT57SP-Control Valve "Spray"c/w PS86A-3⁄4 F x 1⁄2 M Adaptor1 x PS89A-Thermo Valve Outlet1 x PS49-Riser, Wall Elbow, ShowerArm & 125mm Rose1 x PS03-Handspray & Flex1 x TT28820BW-Slider AssemblyTo Accept Handspray

TT60021 x PS53-Exposed Thermo Valve1 x PS04-Handspray, Flex & Cradle

TT60031 x PS53-Exposed Thermo Valve1 x PS89-Outlet Adaptor 3⁄4F x1⁄2M c/w Check Valve1 x PS03-Handspray & Flex1 x TT28821BW-Slider Bar

PS491 x PS30S-Riser Pipe1 x PS40A-Wall Elbow1 x PS29S-Shower Arm 450mm1 x PS10-125mm Rose

5700BA1 x PS53-Exposed Thermo Valve1 x TT57BA-1" Stopcock & Nozzle1 x TT57SH-Control Valve "Shower"c/w 3⁄4 Compression Nut1 x PS49-Riser, Wall Elbow, ShowerArm & 125mm Rose

5702BA1 x PS53-Exposed Thermo Valve1 x TT57SH-Control Valve "Shower"1 x TT57TEE/SP-Tee Control Valvec/w PS86A-3⁄4 F x 1⁄2 M Adaptor1 x PS03-Handspray & Flex1 x PS50-Wall Mounted Cradle1 x TT57BA-1" Stopcock & Nozzle1 x PS49-Riser, Wall Elbow, ShowerArm & 125mm Rose

5704BA1 x PS53-Exposed Thermo Valve1 x PS57SH-Control Valve "Shower"1 x PS57TEE/SP-Tee Control Valvec/w PS86A-3⁄4 F x 1⁄2 M Adaptor1 x TT57BA-1" Stopcock & Nozzle1 x PS49-Riser, Wall Elbow, ShowerArm & 125mm Rose1 x PS03-Handspray, & Flex1 x TT28820BW-Slider AssemblyTo Accept Handspray

Pressure drop (bar) 0.1 0.5 1.0 1.5 2.0 3.0 4.0 5.0

Flow rate (litres/min) 14 30 48 55 61 76 90 102

PERFORMANCE OF THERMOSTATIC VALVE

Flow Rates at Equal Pressure Drops. (Open outlet only. Does not allow for lossesthrough pipes & fittings).

12



13

5700BA (Regent shown, also available 1207.60 1246.45 1437.63 1339.95as GA, GCD & RCD)Thermostatic dual control shower/bath filler.Supplied with 17 1/2" (450mm) shower arm and 5" rose.

5702BA (Regent shown, also available as 1480.45 1542.67 1848.44 1658.36GA, GCD & RCD)Thermostatic triple control shower/bath filler with handspray on wall mounted cradle.Supplied with 17 1/2" (450mm) shower arm and 5" rose.

5704BA (Regent shown, also available as 1505.58 1567.46 1883.18 1685.05GA, GCD & RCD)Thermostatic triple control shower/bath filler with handspray mounted on slider/riser tube.Supplied with 17 1/2" (450mm) shower arm and 5" rose.


Above items are all shown with a 5" rose alternative roses are available - please see page 18 for further details.

Thermostatic Bath Showers Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

5700 BA 5702BA

PERFORMANCE OF BATH FILLING THERMOSTATIC VALVE

Flow Rates at Equal Pressure Drops. Through 1" valve).

Bar 0.1 0.3 0.5 0.8 1.0 2.0 3.0 4.0 5.0

litre/ 9.9 17 24 29 38 50 60 70 78min

5704BA

NB. All riser pipes can be shortened on site.



14

TT5600

5700

TT5600 917.55 950.55 1065.98 1021.83Thermostatic mixer with fixed overhead shower.Supplied with 17 1/2" (450mm) shower arm and 5" rose.

MC5600 N/A 1045.59 1172.60 1123.98Mastercraft version of thermostatic mixer with fixed overhead shower.Supplied with 17 1/2" (450mm) shower arm and 5" rose.


5700 (Regent shown, also available as GA, 1005.79 1041.45 1185.07 1119.58GCD & RCD)Thermostatic mixer with fixed overhead shower and separate valve. Supplied with 17 1/2" (450mm) shower arm and 5" rose.

5704 (Regent shown, also available as GA, 1253.14 1296.49 1555.77 1393.72GCD & RCD)Thermostatic mixer with separate valves to control overhead and hand shower on slider.Supplied with 17 1/2" (450mm) shower arm and 5" rose.

5702 (Regent shown, also available as GA, 1228.08 1271.67 1521.01 1367.03GCD & RCD)Thermostatic mixer with separate valves to control overhead and hand shower on cradle.Supplied with 17 1/2" (450mm) shower arm and 5" rose.


NB. All riser pipes can be shortened on site.

Above items are all shown with a 5" rosealternative roses are available - please seepage 18 for further details.

Thermostatic Showers Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

Long 670 (26 1/2") Short 500 (19 3/4")

‘A’ RISER KIT FOR 5600

1295 (51” CTS)

200mm(8” CTS)

5702

1295(51” CTS)

200(8” CTS)

5704

1295 (51” CTS)

200mm(8” CTS)

5700

5704

5702



15

Thermostatic Handspray Specification Polished Chrome Inca/ Satin Chrome/& Concealed Thermostats Brass /Nickel Weathered Satin Nickel

Bronze




min

TT6002 846.68 872.89 1007.86 938.35Thermostatic mixer with handspray and cradle. Please refer to page 11 & 12 for dimensions.

TT6003 N/A 936.00 1130.80 1006.19Thermostatic mixer with handspray and wall mounted slider bar. Please refer to pages 11 and 12 for dimensions.

PS53C 757.12 780.46 864.98 839.01Recessed thermostatic shower mixer 229mm (9") round wall plate.

PS53CSQ 808.71 833.78 925.33 896.33Recessed thermostatic shower mixer 200mm (8") square wall plate.


16

PS53C1 & PS53C1-CD (Ceramic Disc) 995.81 1026.65 1152.54 1103.64Recessed thermostatic shower mixer on rectangular plate with separate flow valve.

PS53C2 & PS53C2-CD (Ceramic Disc) 1234.73 1272.92 1419.64 1368.38Recessed thermostatic shower mixer on square plate with separate flow valves forshower & spray.

PS53C3 & PS53C3-CD 1440.57 1483.78 1679.24 1595.07Recessed thermostatic shower mixer on square plate with separate flow valves forshower, spray & bath.

Concealed Thermostats Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze






17

6001 (GA shown. Also available as R, N/A 634.60 779.47 682.17GCD & RCD)Manual shower mixer with handspray and wall mounted slider bar. Incorporating single check valve to complywith Water Byelaws.

TT28821BW N/A 147.03 206.23 158.06Slider Bar Complete (handspray and flex please order separately as PS03 refer to page 19).

PS16 149.23 170.01 200.97 182.73Comprises standard 171⁄2" shower arm, back inlet and 5" rose.For any variations please order individual components as set out on page 18.

Handspray & Shower Arms Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

750 (29.5”) APPROX



18

PS73 133.28 176.95 228.73 190.24Comprises standard 800mm straight shower arm, back inlet and 5" (125mm) rose.For any variations please order individual components as set out below.

Back inlets available:

PS41 back inlet 68.33 82.03 89.68 88.18MCPS41 Mastercraft style back inlet. N/A 90.24 98.63 96.99

Shower arms available:

PS29S 171⁄2" (450mm) shower arm. 41.75 43.04 48.29 46.26PS29L 24" (600mm) shower arm. 47.57 50.42 57.04 54.20PS80 32" (800mm) straight shower arm (3⁄4" BSP out). 47.57 50.42 57.04 54.20PS80A 32" (800mm) straight shower arm (1⁄2" BSP out). 47.54 50.42 57.04 54.20

Roses available:

PS10 5" diameter rose. 39.16 44.91 63.02 48.29PS44 8" diameter rose. 97.33 106.69 141.83 114.70PS45 10" diameter rose. 127.54 140.61 187.74 151.17PS46 12" diameter rose. 147.84 164.47 218.41 176.83

PS50 50.19 50.33 62.92 54.10Wall Mounted Cradle for Handspray.

Shower Arms & Specification Polished Chrome Inca/ Satin Chrome/Shower Accessories Brass /Nickel Weathered Satin Nickel

Bronze

Back inlet PS41

Compressionjoint

ShowerarmPS80800mm long(can be reducedon site)

5" diameterrose PS10



19

TT67 S/Kit for GA or R fittings N/A 317.46 418.15 341.28MC67 S/Kit for Mastercraft fittings N/A 349.20 459.97 375.41

Designed to provide a handspray with a flexible hose as an optional attachment to a manual or thermostatic fixed overhead shower. Kit comprises handspray, cradle and two-way diverter.

PS60 27.33 28.14 32.77 30.24Ball joint swivel only.

PS61 39.16 44.91 63.02 48.294" skirted rose.

TT3430 17.35 19.27 28.20 20.80Shower Tray Waste. 85 (33⁄8") dia. flange x 85 (33⁄8") tail (11⁄2" BSP).

PS62 33.90 34.93 43.77 37.59Wall outlet (1⁄2" BSP outlet).

PS05 24.92 25.67 58.67 27.59Flexible hose.

PS03 83.88 86.49 150.83 92.98Flexible hose complete with handspray.

PS02 57.90 60.80 91.36 65.37Handspray.

TT61600 N/A 17.35 27.28 18.65Wall bracket and swivel connector.(PS03 handspray and flex order seperately).

Shower Accessories Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

1/2” BSP

65.0

42.0

1/2” BSP

42.0

13.0



TT3408W 70.57 74.14 104.63 79.68Bath pop-up waste and overflow set 550mm flexible tube and cable.

TT3408W-EXT 70.57 74.14 104.63 79.68As above with 900mm flexible tube and cable

TT3408W-XXL 70.57 74.14 104.63 79.68As above with 1300mm flexible tube and cable

TT3410 25.59 27.92 44.62 30.03Basin waste with brass plug and chain.60mm (23⁄8") dia. flange x 85mm (33⁄8") tail (11⁄4" BSP)

TT3435 26.62 29.23 53.54 31.42Slotted sink waste.85mm (33⁄8") dia. flange x 85mm (33⁄8")tail (11⁄2" BSP)

TT3400 37.09 40.75 66.58 43.81Bath waste, plug, chain and overflow set.72mm (27⁄8") dia. flange x 72mm (27⁄8") tail (11⁄2" BSP)

TT3420/15 64.92 68.24 82.03 73.37Cistern lever handle with 150mm shank.

TT3420/25 79.20 82.50 96.16 88.68As above with a 250mm shank.

TT3420/35 79.20 82.50 96.16 88.68As above but with 350mm shank for concealed cisterns.

Wastes & Cistern Levers Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

20

TT3420/35

TT3420-15/25



1010 (Regent shown. Also available as 255.94 268.74 348.33 288.92GA, GCD & RCD)1⁄2" pillar sink mixer with swivel nozzle.

2010 (GA, R, GCD & RCD) 255.94 268.74 348.33 288.92As above but wall mounted, concealed supplies.

1010 & 2010 as above RFC style 325.93 339.50 421.53 364.95

2015 (GA, R, GCD & RCD) 284.10 298.30 386.65 320.66As above but wall mounted, exposed supplies.

2015 As above but RFC style. For swanneck 361.88 375.45 457.50 403.61sizes please refer to dimension page 23.

NB. Mixers have single flow nozzles fitted with an aerator. Single check valves are incorporated in the hot and cold inlets to comply with water byelaw 25.IRN 101.

1040 (GA shown. Also available as R, N/A 470.12 611.17 505.36GCD & RCD)Sink mixer with flexible hose spray for rinsing items before dishwashing. The hand held spray is retractable and rests in a flush fitting independent holder.

As above but RFC style. N/A 592.35 770.06 636.80

Kitchen Mixers & Specification Polished Chrome Inca/ Satin Chrome/Kitchen Taps Brass /Nickel Weathered Satin Nickel

Bronze

21

40

1/2 BSP

2010



1030 (Only available RFC) N/A 471.62 553.64 506.97Mixer and handspray for fitting into work surface at a fixed centres of 203mm. Handspray can be located in a suitable position close by.

Note: 1030 and 1040Handspray operation interupts the flow through the nozzle at the same temperature.

260 (RFC shown) 191.61 208.33 241.56 223.961⁄2" bib tap with quarter turn china lever handle (pair).

260 (GA shown. Also available as R, 135.34 142.21 179.02 152.87GCD & RCD)1⁄2" sink bib tap (pair).

TT282 17.35 18.20 29.56 19.56Backplate elbow (each).

TT280 33.79 38.11 43.31 40.966" standard (each).

TT284-1 1" extension (each). 18.06 18.72 30.80 20.13TT284-2 2" extension (each). 18.72 19.45 32.25 20.88TT284-3 3" extension (each). 21.62 22.29 34.31 23.98TT284-4 4" extension (each). 33.91 34.93 40.69 37.59

106 (GA shown. Also available as R, 137.46 144.37 198.69 155.20GCD & RCD)1⁄2" pillar sink tap, with raised nozzle (pair).


Basin Mixers Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

22

40



Kitchen Mixers & Taps Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

2020 (GA shown. Also available as R, 255.94 268.74 348.33 288.92GCD & RCD)Wall mounted sink mixer.

1070 (RFC shown) 383.50 396.71 464.74 426.74Monobloc single hole sink mixer. Quarter turn china lever handles and swivel nozzle.For swanneck sizes please refer to dimension page 23

As above but R, GA, GCD or RCD style. 302.62 314.84 368.85 338.43

23



MC2134 Mastercraft 3⁄4" bath pillar taps (pair). N/A 236.94 271.78 254.70

MC2123 Mastercraft 1⁄2" basin pillar taps (pair). N/A 177.78 223.78 191.12

MC6450 Mastercraft 3-hole basin mixer with N/A 435.76 479.00 468.45pop-up waste 112mm nozzle.

MC6455 As above but with 140mm nozzle. N/A 435.76 479.00 468.45

6451, 6456 N/A 435.76 479.00 468.45With plug and chain waste and chain boss on nose.

6452, 6457 With plug and chain waste and chain stay. N/A 435.76 479.00 468.45

MC6450 RFC As MC6450 above but with lever action SPECIAL ORDER ONLY

MC6470 N/A 286.65 352.34 308.16Mastercraft Monobloc basin mixer with pop-up waste.

MC1870 N/A 320.49 373.14 344.53Mastercraft Monobloc bidet mixer with pop-up waste.

Mastercraft Fittings Specification Polished Chrome Inca/ Satin Chrome/Brass /Nickel Weathered Satin Nickel

Bronze

57 A/F (21/4”)57 A/F (21/4”)

MC2123MC2134

24



25

MC4300 N/A 846.94 1007.91 910.49Mastercraft Bath/spray mixer, pillar mounting.

MC4308 N/A 846.94 1007.91 910.49Mastercraft Bath/spray mixer, wall mounting. (Not illustrated).Incorporates singlecheck valve.

MC3300 N/A 494.73 597.79 531.82Bath filler, pillar mounting.

MC3308 N/A 494.73 597.79 531.82Bath filler, wall mounting.(Not illustrated).

MC3490 SET N/A 616.65 669.16 662.94Mastercraft 3/4" Bath deck valves and nozzle to form bath filler

MC3490 DV PR N/A 358.67 393.59 385.56Mastercraft 3/4" Deck Valves

MC3490 DN N/A 196.79 214.30 211.55Mastercraft 1" Bath Nozzle (8 3/4" proj)



Bronze

MC3490DN

MC3490SET




Bronze

MC3470 SET N/A 470.69 540.11 505.98Mastercraft Concealed Wall Stops, Nozzle and Tee

MC3470 WS N/A 307.96 353.94 331.04Mastercraft 3/4" Concealed Wall Stops, Pair

MC3470 WN N/A 122.47 146.52 131.64Mastercraft 7" Wall Nozzle and B/Nut

MC3494 SET N/A 928.99 1095.32 998.66Mastercraft 4 hole deck set comprising hot & coldvalves, diverter, nozzle and pull-up handspray incorporating single check valve to comply with Water Byelaws


26

MC3470WS

MC3470WN


270 (105/8”) as suppliedcan be reduced to 190 (71/2”) on site

180

(71 /1

6”)

MC3470 SET




Bronze

MC3460 N/A 446.88 576.61 480.38Mastercraft Concealed bath mixer, mounted on panel. This fitting is supplied assembled (as shown) and must not be removed from the plate

MCPS53C N/A 858.52 951.45 922.93Mastercraft recessed thermostatic shower mixer. Octagonal wall plate and lever.

MCPS53 N/A 772.75 851.05 830.72Mastercraft Exposed Thermostatic mixer valve only and inlet bends.

27

350 (13 ")/4 3

200 (8"

MC3460 viewed from rearshowing supply connections

7





MCPS16 N/A 187.00 221.10 200.98Comprises standard 171⁄2" shower arm, Mastercraft back inlet and 5" rose.For any variations please order individual components as set out on page 18.

MC3400 N/A 50.92 83.19 54.77Bath waste, plug, chain and overflow set.

MC3420/15 N/A 85.33 102.53 91.72Cistern lever handle with 150mm shank.For dimensions see page 20.

MC3420/25 As above with a 250mm shank. N/A 103.12 120.19 110.87

MC3420/35 N/A 103.12 120.19 110.87As above but with 350mm shank for concealed cisterns.


Bronze

28



(23 /

8")

66 (2

3 /8"

)

53

147

(53 /

4")

(113

/ 16")

FLEXIBLEHOSE

115 (41/2")

45

Q2-6571

115 (41/2")

300 (12") MAX

FLEXIBLEHOSE

5366 (2

3 /8"

)

(21 / 8

")

(113

/ 16")

4514

7 (5

3 /4"

)

Q2-6570

45 (1

13/ 16

") M

AX

HOLE 34(111/32")

HOLE 34 (11/32")

29

Q Basin Fittings Specification Chrome

Q2-2124 (pair) 289.86Basin pillar tap

Q2-6571 171.85Lift & turn monobloc basin mixer without pop-up waste Also available: Q2-6570 231.89Lift & turn monobloc basin mixer with pop-up waste

Q2-6471 171.85Sequential monobloc basin mixer without pop-up waste

Also available: Q2-6470 231.89Sequential monobloc basin mixer with pop-up waste

Q-64 33.12150mm Extension standard to suit monobloc basin mixers

Q Range

58 (2

5 /16

")12

5 (4

15/ 16

")

65 (2

9 /16

")

HOLE22 (7/8")

1/2" B.S.P

102 (4")Q2-2124

(25 /

16")

72 (2

13/ 16

")

59

147

(53 /

4")

(113

/ 16")

FLEXIBLEHOSE

115 (41/2")

45

Q2-6471

115 (41/2")

300 (12") MAX

FLEXIBLEHOSE

59

72 (2

13/ 16

")

(25 /

16")

(113

/ 16")

4514

7 (5

3 /4"

)

Q2-6470

45 (1

13/ 16

") M

AX

HOLE 34(111/32")

HOLE 34 (11/32")

155

(61 /

16")

42

(15/8")

Q2 64



Q Basin Fittings Specification Chrome

Q-3418W 39.35Basin pop-up waste Also available:Q-3411 49.69Basin flip-over waste

Q2-6454 434.783 Hole wall mounted basin filler without pop-up waste

Q2-6455, (140mm nozzle) 360.25Q2-6450, (115mm nozzle) 360.253 Hole basin set with pop-up waste

Also available:Q2-6456, (140mm nozzle) 308.50Q2-6451, (115mm nozzle) 308.503 Hole basin set without pop-up waste

Q Range

30

60 (23/8") 180 (7")

13 (1/2")

3/4" BSP

Q2-6454

35 (13 / 8")

FINISHEDWALL

SURFACE

TIMBER STUDWORK

HOLE 42(121/32")

300 (12") MAX

1/2" BSP

HOLE 29 (15/32")HOLE29 (15/32")

1/2" BSP

FLEXIBLEHOSE

Q2-6450/6455 Q2-6451/6456

FLEXIBLEHOSE

1/2" BSP1/2" BSP

HOLE 29(15/32")

HOLE 29(15/32")

46(1

13/ 16

")

66(2

5 /8"

)

64(2

1 /2"

)

(113

/ 16")

45

(113

/ 16")

45

115 (41/2")

3/4" BSP

25 (1")

115 (41/2") Q2-6450/6451140 (51/2") Q2-6455/6456



Q Bath Fittings Specification Chrome

Q2-1870 240.16Sequential monobloc bidet mixer Also available:Q2-1970 240.16Lift & turn monobloc bidet mixer

Q2-3480L SET 424.44Q2 3/4" Concealed 3 hole deck filler 200mm Nozzle (incorporates deck valves, nozzle, tee and connections). Double nozzle outlet.

Q2-3480S SET 414.08Q2 3/4" Concealed 3 hole deck filler 150mm Nozzle (incorporates deck valves, nozzle, tee and connections). Single nozzle outlet.

Q2-3484L SET 598.35Q2 3/4" Concealed 3 hole deck filler 200mm Nozzle (incorporates deck valves, nozzle, tee and connections). Double nozzle outlet.

Q2-3484S SET 590.07Q2 3/4" Concealed 3 hole deck filler 150mm Nozzle (incorporates deck valves, nozzle, tee and connections). Single nozzle outlet.

Q Range

31

115 (41/2")

300 (12") MAX

FLEXIBLEHOSE

72 (2

13/ 16

")

(113

/ 16")45

147

(53 /

4")

Q2-1870

45 (1

13/ 16

") M

AX

HOLE 34(111/32")

115 (41/2")

300 (12") MAX

FLEXIBLEHOSE

66 (2

3 /8"

)

(113

/ 16")45

147

(53 /

4")

Q2-1970

45 (1

13/ 16

") M

AX

HOLE 34(111/32")

47 MAX(17/8")

Q2-3480SQ2-3480L

250 (97/8" ) AS SUPPLIED CAN BE REDUCED

165

(61 / 2

" )46

(113

/ 16" )

125

(5")

TO 170 (611/16") ON SITE

39 (19/16")HOLE

3/4" BSP 3/4" BSP

34 (15/16")HOLE

Q2-3484L Long Deck NozzleQ2-3480L Long Deck Nozzle

200 (77/8")

150 (529/32")

34 (115/16") HOLE1" BSP

28 (11/8")

91 (3

9 /16

")

34 (15/16") HOLE

28 (11/8")1" BSP

91 (3

9 /16

")

150 (529/32")

Q2-3484S Short Deck NozzleQ2-3480S Short Deck Nozzle

39 (19/16")HOLE

3/4" BSP 3/4" BSP

34 (15/16")HOLE

34 (15/16")HOLE

47 MAX(17/8")

208

(83 /

16")

125

(5")

165

(61 / 2

")

165

(61 / 2

")46

(113

/ 16")

Q2-3484S SETQ2-3484L SET

290 (113/8" ) AS SUPPLIED CAN BE REDUCED TO 210 (81/4" ) ON SITE




Q2-3450WS PR 304.363/4" Wall Stop (pair)

Q2-4300 445.14Bath/Spray Mixer

Also available:Q2-4308 445.14As above for wall mounting to special order

Q-3425/42 513.4642mm Floorstands and Bracing Bar

Q Range

32

70 (23/4")

63 MIN(21/2") MIN

88 MAX (31/2")

35(13/8")

72(27/8")

42 (111/16")HOLE

REQUIRED

FINISHEDWALL

SURFACE

Q2-3450 WS

Q2-4300 Bath/Spray Mixer

1700 (67") FLEX TO HANDSPRAY

60 (23/8") DIA

60 (2

3 /8"

)15

0 (6

")

3/4" B.S.P

180 (71/8") Fixed Centres

35(13/8")170 (611/16")

Holes 29 (15/32")Q2 Floor Mounted 4300 Bath/Spray Mixer

FLEX TO HANDSPRAY

842

(331 /

8")

DIA 42 (1.65")

Bracingkit

Floo

r le

vel

Outline of Overflow pipe

Q-3425-42 Floor standards to take Q-4300. Suitable for some baths with ø28mm (11/8") vertical overflow tube.

Available special order only




Q2-3450L SET 443.07Q2 3/4" Concealed 3 hole filler 220mm Nozzle (incorporate wall stops, nozzle, tee and connections). Double nozzle outlet.

Q2-3450S SET 436.86Q2 3/4" Concealed 3 hole filler 170mm Nozzle (incorporate wall stops, nozzle, tee and connections). Single nozzle outlet.

Q2-2134 (pair) 335.41Bath pillar tap

Q-3408W 103.52Bath pop-up waste & overflow set

Q Range

33

170 (611/16")

220 (811/16")38(11/2")

60 (2

3 /8"

) 1 "

BSP

Q2-3450L Long Wall Nozzle

29 (15/32")

170 (611/16")38(11/2")

60 (2

3 /8"

) 1 "

BSP

Q2-3450S Short Wall Nozzle

29 (15/32")

170 (611/16")

3/4" B.S.P58 (2

5 /16

")16

0 (6

1 /4"

)

HOLE 29 (15/32")

101

(4")

Q2-3450S SETQ2-3450L SET

197

(73 /

4")

ONE

OU

TLET

247

(93 /

4")

TWO

OU

TLET

(13 /8")35

270 (10 5/8" ) AS SUPPLIED CAN BEREDUCED TO 190 (7 1/2" ) ON SITE

TIMBER STUDWORK

FINISHEDWALL SURFACE

22mmCOMP.

HOLE 42(111/16")



Q Shower Accessories Specification Chrome& Cistern Levers

Q Range

34

Q2-3420/35 350 (14") MAX(CUT AS REQUIRED)

BACKBUSH

FRONTBUSH

100(4")

50(2")

25(1")

WALL CAVITY

1/2" BSP 22 (7/8")HOLE REQUIRED

3/4" BSP

60 (23/8")

85 (3

3 /8"

)

220 (83/4")

Q2-16SP6

Q2-28821

63(21/2")

755

(293 /

4")

Q-28821 165.64Slider bar only (Does not include handspray & flex Q-03)

Q-62 45.551/2" Wall outlet

Q-03 115.94Handspray & flexible hose

Cistern lever Q-3420-15: 150mm shank 70.40Q-3420-25: 250mm shank 76.61Q-3420-35: 350mm shank 76.61

Q-16SP6 144.92Overhead shower arm & adjustable 6 jet head

Q-16 155.28Overhead shower arm & 6" rose Not illustrated:Q-16EC 186.34Overhead shower arm & 6" easy clean rose

Q2-16Q2-16EC

60 (23/8") 495 (191/2")

150 (6")

3/4" BSP

118

(45 /

8")

Q2-3420/15

150 (6")

25(1")

MAX

50(2")

100(4")

1/2" BSP 22 (7/8")HOLE REQUIRED



TIM

BER

STU

DW

OR

K

FINISHED WALLSURFACE

140

(51 /

2")

340

(133 /

8")

100

(4")

200 (8")

25

88 MAX (37/16")65 MIN (29/16")

Q2-53D1

Q2-53C

229 (9")FINISHED WALLSURFACE

TIM

BER

STU

DW

OR

K

FACE PLATE

88 MAX (37/16")

65 MIN(29/16")

25(1")

Q Shower Valves Specification Chrome

Q2-53C 604.56Thermostatic shower valve with circular backplate

Q2-53D 809.53Thermostatic shower valve with rectangular backplate

Q Range

35

Q RANGE TAPS & MIXERS

3 ⁄ 4" Bath

1 ⁄2" Basin

Sequential Mixers

FLO

W R

ATE

(L/M

IN)

10

20

30

40

50

60

70

80

90

1 (1.47) 1 (14.7) 2 (29.4) 3 (44.1) 4 (58.8) 5 (73.5)0.DYNAMIC PRESSURE BAR (P.S.I)



MODEL SPARE PARTS PB CP/NI IB SNI

PS01 POP UP EXTENSION ROD 18.20 N/A N/A N/A

PS02 HANDSPRAY & ROSE 57.90 60.80 91.36 65.37

PS03 HANDSPRAY, ROSE & FLEX 83.88 86.49 150.83 92.98

PS04 HANDSPRAY,ROSE,FLEX & CRADLE 165.26 170.35 234.19 183.13

PS05 FLEXIBLE HOSE 1.5M 24.92 25.67 58.67 27.59

PS06 CHINA SLEEVE (4300 DIV.) 18.20 N/A N/A N/A

PS07 CHINA SLEEVE (4300 HANDSPRAY) 18.20 N/A N/A N/A

PS08 CHINA SLEEVE (3420 CISTERN) 18.20 N/A N/A N/A

PS08B CHINA SLEEVE (RFC & THERMO) 18.20 N/A N/A N/A

PS09 2.1/2" HANDSPRAY ROSE 21.10 22.24 36.93 23.91

PS1/2-12 1/2" WALL UNIONS COMP.(5600)PR 123.24 126.95 147.22 136.46

PS1/2-12CU COPPER UNIONS FOR THERMO PAIR 123.24 126.95 147.22 136.46

PS1/2-13 1/2" PILLAR UNIONS COMPLETE PR 123.24 126.95 147.22 136.46

PS1/2-13LT 1/2" LONG TAIL PILLARS COMP.PR (1010) 149.64 153.37 173.59 164.86

PS1/2-13M 1/2" MUSHROOM UNIONS COMP.PAIR 123.24 126.95 147.22 136.46

PS1/2-51 CERAM.DSC H/WK NO CAP (BS1010) PAIR 45.28 N/A N/A N/A

PS1/2-51M CERAM.DSC H/WK NO CAP (BS5412) PAIR 45.28 N/A N/A N/A

PS10 SHOWER ROSE 5" DIA 39.16 44.91 63.02 48.29

PS11 4300 DIV.HANDLE & CRANK ONLY 56.70 58.43 67.76 62.87

PS11A 5600 GUM. DIVERTOR HANDLE COMPLETE 56.70 58.43 67.76 62.87

PS14C BARWIL CHINA INDICES PAIR 4.95 N/A N/A N/A

PS16 17 1/2" S/ARM, 5" ROSE+B/INLET 149.23 170.01 200.97 182.73

PS21 POP UP WASTE ASSEMBLY COMPLETE 34.73 42.02 45.43 42.99

PS27 SAVOY DIV.+CHK VALVE COMPLETE N/A 102.86 128.58 110.56

PS28 SAVOY SINGLE CHECK VALVE N/A 44.27 55.39 47.57

PS29L SHOWER ARM ONLY 24" (3/4" OUTLET) 47.57 50.42 57.04 54.20

PS29S SHOWER ARM ONLY 17.1/2" (3/4" OUTLET) 41.75 43.04 48.29 46.26

PS3/4-12 3/4" WALL UNIONS COMPLETE PAIR" 157.85 162.55 188.45 174.74

PS3/4-13 3/4" PILLAR UNIONS COMP. PAIR 157.85 162.55 188.45 174.74

PS3/4-13EXT 3/4" EXT.PILLAR UNIONS COMP.PR 157.85 162.55 188.45 174.74

PS3/4-51 CERAMIC DISC HEADWORKS (3/4”) PAIR 45.28 N/A N/A N/A

PS30L RISER PIPE C/W NUTS LONG 4301/4302 79.27 100.87 117.72 108.40

PS30S RISER PIPE C/W NUTS SHORT 5300/5600 65.61 67.65 79.68 72.73

PS32 1.1/4" POP UP PLUG COMPLETE 18.20 18.77 21.86 20.18

PS32A 1.1/2" POP UP PLUG ONLY 18.20 18.77 21.86 20.18

PS33 PULL ROD & KNOB ROUND 32.05 33.07 49.54 35.55

PS33A POP UP ROD CONNECTOR 3.68 N/A N/A N/A

PS35 SHUTTLE FOR 4300 3.49 N/A N/A N/A


PS36 `O` RINGS FOR SHUTTLE (2) 0.50 N/A N/A N/A

PS37 DIV HANDLE,CRANK,SPINDLE 4300 90.11 92.81 101.27 99.79

PS38 3/4" HEX NUT C/W CONE 18.20 18.77 21.86 20.17

PS39 3/4" HEX NUT C/W RINGS 18.20 18.77 21.86 20.17

PS40A 3/4" BACKPLATE ELBOW 5600 89.63 92.43 101.30 99.36

PS40C 3/4" BACKPLATE ELBOW 4301 89.63 92.43 101.30 99.36

PS40D 3/4" BACKPLATE ELBOW 4002 89.63 92.43 101.30 99.36

PS41 3/4" BACK INLET (CONC SUPPLY) 68.33 82.03 89.68 88.18

PS42 HANDSPRAY & JET (1040) 57.90 60.80 91.36 65.37



PS47 9" ROUND PLATE+SCREWS FOR PS53C (BARWIL) 80.17 82.62 108.95 88.84

PS47B 7" PLATE + SCREWS FOR 3450WD (RACE LINE) 80.17 82.62 108.95 88.84

PS47C1 RECTANGULAR PLATE FOR PS53C1 (BARWIL) 126.95 153.23 169.11 164.72

PS47C2 RECT.PLATE & SCREWS FOR PS53C2 (BARWIL) 137.81 174.76 202.56 187.86

PS47SQ 8" SQUARE PLATE+SCREWS FOR PS53CSQ(BW) 82.10 84.70 111.66 91.05

PS48 RISER KIT COMPLETE FOR 4301 249.83 281.19 330.33 302.27

PS48A RISER KIT COMPLETE FOR 4302 249.83 281.19 330.33 302.27

PS49 RISER KIT COMPLETE 5600 236.15 248.00 292.29 266.60

PS49A RISER KIT COMPLETE FOR 5300 236.15 248.00 292.29 266.60

PS50 WALL MOUNTED CRADLE 50.19 50.33 62.92 54.10

PS52 CERAM.DSC H/WK NO LVR*RFC*PAIR (BS1010) 45.28 N/A N/A N/A

PS52F CERAM.DSC H/WK NO LVR*RFC*PAIR (RFC1070) 45.28 N/A N/A N/A

PS52M CERAM.DSC H/WK NO LVR*RFC*PAIR (BS5412) 45.28 N/A N/A N/A

PS53 THERMO VALVE + INLET BENDS 681.42 702.52 773.72 755.20

PS53BA THERMO VALVE, FLOW VALVE + BATH NOZZLE 881.11 907.49 1026.25 975.57

PS53C CONC.THERMO VALVE + 9" ROUND PLATE 757.12 780.46 864.98 839.01

PS53C1 CONC.THERMO VALVE, F.V+RECT.PLATE 995.81 1026.65 1152.54 1103.64

PS53C1-CD CONC.THERM VALVE, 3QT F.V+RECT.PLATE(BW) 995.81 1026.65 1152.54 1103.64

PS53C2 CONC.THERMO VALVE,2xF.V+RECT.PLATE 1234.73 1272.92 1419.64 1368.38

PS53C2-CD CONC.THERMO VALVE,2x3QT F.V+RECT.PLATE 1234.73 1272.92 1419.64 1368.38

PS53C3 CONC.THERMO VALVE,3xF.V+RECT.PLATE 1440.57 1483.78 1679.24 1595.07

PS53CSQ CONC.THERMO VALVE + 8" SQUARE PLATE 808.71 833.78 925.33 896.33

PS54 CRADLE COMPLETE (4300) 81.04 83.98 107.43 90.29

PS55 P TRAP,WSTE,PLG,CHN,TBE,FLANGE 506.47 545.83 615.80 586.79

PS56 42mm ELBOW 92.71 96.21 101.48 103.45

PS56/2 303 1.1/2Fx42mm C STRAIGHT 4 WSTE 92.71 96.21 101.48 103.45

PS56A 42mm COMPRESSION NUT ONLY 14.97 16.24 19.99 17.48

36

Spare Parts

GA R GCD RCD TT TCD RFC MC MODEL SPARE PARTS PB CP/NI IB SNI

• • • • 22 SIDEVALVE + TOPWORKS (BS5412) PAIR 165.83 193.90 215.54 208.42

• • • • 24 HEADWORKS (BS1010) PAIR 109.18 112.41 136.43 120.83

• • • • 25 3/4" HEADWORKS PAIR 116.26 119.37 162.22 128.31

• • • • 24M HEADWORKS (BS5412) PAIR 109.18 112.41 136.43 120.83




PS56B 42mm COMPRESSION OLIVE ONLY 5.07 N/A N/A N/A

PS56C 1.1/2" BSPFx42mm (TUBE) STRAIGHT COUPLER 92.71 96.21 101.48 103.45

PS56D 42mm ELBOW C/W 42mm TUBE FXD (drg pt.3) 92.71 96.21 101.48 103.45

PS56E 42mm x 42mm x 28mm TEE (drg pt.3a) 139.08 144.33 152.22 155.16

PS57 42mm TUBE (PER 300mm) 45.50 59.52 80.47 63.94

PS57A FLANGE TO SUIT 42mm TUBE 33.24 36.75 41.98 39.49

PS58 BOTHWELL FUNNEL 18.20 19.11 22.67 20.55

PS59A SHWR ARM 17 1/2" 45 DEG/B (1/2" BSP OUT) 41.75 43.03 48.31 46.24

PS59L SHOWER ARM 24" (1/2" BSP OUTLET) 47.57 50.40 57.04 54.20

PS59S SHOWER ARM 17 1/2”“ (1/2" BSP OUTLET) 41.75 43.03 48.31 46.24

PS60 BALL JOINT ONLY (1/2" BSP) 27.33 28.14 32.77 30.24

PS61 SHOWER ROSE 4" SKIRTED (1/2" BSP INLET) 39.16 44.91 63.02 48.29

PS61A SHOWER ROSE 4" SKIRTED (3/4" BSP INLET) 39.16 44.91 63.02 48.29

PS62 BENT WALL OUTLET FOR FLEX 33.90 34.93 43.77 37.59

PS63 SHOWER ARM GAS MANTEL 17.1/2" (3/4" OUT.) 115.89 119.47 124.78 128.40

PS6450 3H BASIN MXR 4" NOZZLE ASSY 150.24 154.75 167.75 166.36

PS6455 3H BASIN MXR 5" NOZZLE ASSY 150.24 154.75 167.75 166.36

PS65A RISER KIT COMP. C/W 4" SWIVEL ROSE 5600 277.11 309.35 363.12 332.56

PS65B RISER KIT COMP. C/W 4" SWIVEL ROSE 5300 277.11 309.35 363.12 332.56

PS65C RISER KIT COMP. C/W 4" SWIVEL ROSE 4301 263.47 276.18 325.10 296.90

PS65D RISER KIT COMP. C/W 4" SWIVEL ROSE 4302 263.47 276.18 325.10 296.90

PS66 17 1/2" S/ARM,4" ROSE,B/JNT,B/INLET 176.55 198.38 233.79 213.28

PS68 45mm SLIDING FLANGE FOR 15mm TUBE 16.02 16.51 21.83 17.75

PS69 50mm SLIDING FLANGE FOR 22mm TUBE 16.02 16.51 21.83 17.75

PS70 FLEXIBLE HOSE C/W ELBOW (6450) EACH 25.22 N/A N/A N/A

PS71 SWIVEL NUT ONLY (1010/70 S/NECK) 19.54 20.13 22.52 21.65

PS72 FLEXIBLE HOSE 300mm x 1/2" BSPF x 10mm 25.22 N/A N/A N/A

PS73 SHOWER ARM 800mm STRAIGHT, 5" ROSE,B/INLET 133.28 176.95 228.73 190.24

PS74 4" SWANNECK COMPLETE (1010/1070) 73.28 75.51 90.53 81.17

PS74A 6" SWANNECK COMPLETE (1010/1070) 73.28 75.51 90.53 81.17

PS74B 8" SWANNECK COMPLETE (1010/1070) 73.28 75.51 90.53 81.17

PS74C 10" SWANNECK COMP.SQUARE TYPE (1010/70) 92.01 94.02 114.74 101.06

PS74D 12" SWANNECK COMP.SQUARE TYPE (1010/70) 97.94 100.94 120.85 108.50

PS74E 8" SWANNECK COMPLETE (1030/1040) 73.28 75.51 90.53 81.17

PS76 1" BSP HEX NUT 12.93 13.37 13.66 14.38

PS78 GOOSENECK RISER C/W NUT 133.13 137.27 159.15 147.53

PS79 1/2" OFFSET TAIL PLATE 9.86 10.27 15.61 11.05

PS79A 3/4" OFFSET TAIL PLATE 13.28 13.78 19.11 14.83

37



PS80 SHOWER ARM 800mm STRAIGHT (3/4" BSP OUT.) 47.57 50.42 57.04 54.20

PS80A SHOWER ARM 800mm STRAIGHT (1/2" BSP OUT.) 47.57 50.42 57.04 54.20

PS81 1.1/2" PLUG, CHAIN & TRIANGLES 18.20 18.77 21.86 20.17

PS81A 1.1/4" PLUG, CHAIN & TRIANGLES 18.20 18.77 21.86 20.17

PS82H 6454 8" WALL NOZZLE & AERATOR 73.28 75.51 90.53 81.17

PS83 O’RING FOR BATH PLUG 0.36 N/A N/A N/A

PS83A O’RING FOR BASIN PLUG 0.36 N/A N/A N/A

PS85 3400 OVERFLOW BEND,NUT & CONE 56.50 58.31 61.83 62.66

PS85A 3400 OVERFLOW BEND EXT.THD, NUT&CNE 188.63 190.44 193.96 204.71

PS85B 3400 OVERFLOW FRONT ONLY 20.13 20.72 21.34 22.26

PS86 1/2" Mx1/2" M OUT.ADAP(MEY.6003) 18.86 19.84 29.56 21.33

PS86A 3/4" Fx1/2" M OUTLET ADAP.(4300) 18.86 19.84 29.56 21.33

PS86B 1/2" Mx3/4" M OUTLET (MEYN.5600) 18.86 19.84 29.56 21.33

PS86C 3/4" Mx3/4" M OUTLET ADAP.(5300) 18.86 19.84 29.56 21.33

PS88 HOLDER BAT AND SCREWS 27.52 30.49 31.35 32.75

PS89 3/4" Mx1/2" M+CHK.OUTLET(GUM.6003) 26.53 27.33 34.83 29.38

PS89A 3/4" Mx3/4" M OUTLET(GUM.5600) 18.86 19.84 29.56 21.33

PS89B 3/4" Mx1/2" F OUTLET(GUM.5600DV) 18.86 19.84 29.56 21.33

PS90 20mm NOZZLE OUTLET (UN-POL.B) 2.83 N/A N/A N/A

PS92 SAVOY CRADLE ONLY N/A 83.98 107.43 90.29

PS93 1.1/4" BOTTLE TRAP,TUBE & FLGE 65.29 81.74 91.41 87.87

PS96 1" SPACER 6450 NOZZLE 76.30 79.08 91.79 85.02

SK-GA/R1010 SEAL KIT FOR GA/R1010 9.74 N/A N/A N/A

SK-GA/R1040 SEAL KIT FOR GA/R1040 INC.AUTO DIV.ASSBY 103.48 N/A N/A N/A


SK-GA/R1870 SEAL KIT FOR GA/R1870 INC.AERATOR 6.92 N/A N/A N/A

SK-GA/R2123 SEAL KIT FOR GA/R2123/24/25 (PRS) 2.60 N/A N/A N/A

SK-GA/R2134 SEAL KIT FOR GA/R2134 (PRS) 2.60 N/A N/A N/A


SK-GA/R4300 SEAL KIT FOR GA/R4300/8 INCL. SHUTTLE 18.66 N/A N/A N/A

SK-GA/R6450 SEAL KIT FOR GA/R6450/55 7.03 N/A N/A N/A


SK-GA/R6470 SEAL KIT FOR GA/R6470/71/75/76 6.49 N/A N/A N/A

SK-RFC1010 SEAL KIT FOR RFC1010 (NOT INC.T/WKS) 6.31 N/A N/A N/A

SK-SWANNECK SEAL KIT FOR SWANNECK 2.17 N/A N/A N/A

SKBW4750-1 GUMMER THERMO: SEAL KIT SKBW4750-1 19.53 N/A N/A N/A

SKBW4750-2 GUMMER THERMO: CARTRIDGE SKBW4750-2 78.01 N/A N/A N/A

PK1 GUMMER THERMO: PACKING KIT 17.96 N/A N/A N/A


38

Spare Parts (Mastercraft) Prices excluding VAT

GA R GCD RCD TT TCD RFC MC MODEL MASTERCRAFT SPARE PARTS PB CP/NI IB SNI

• 22 M/CRAFT SIDEVALVE+TOPWORKS (BS5412) PAIR N/A 242.39 269.42 260.54

• 24 M/CRAFT HEADWORKS (BS1010) PAIR N/A 140.50 170.54 151.04

• 24M M/CRAFT HEADWORKS (BS5412) PAIR N/A 140.50 170.54 151.04

• 25 M/CRAFT 3/4" HEADWORKS PAIR N/A 149.20 202.78 160.36


MCPS02 M/CRAFT HANDSPRAY & HEX.ROSE N/A 66.77 100.51 71.76

MCPS03 M/CRAFT HANDSPRAY, HEX.ROSE & FLEX N/A 95.00 139.41 102.14

MCPS04 M/CRAFT H/SPRY,HEX.ROSE,FLEX,CRAD N/A 187.38 257.57 201.40

MCPS1/2-12 M/CRAFT 1/2" WALL UNIONS COMP.(5600) PR N/A 139.62 161.92 150.10

MCPS11A M/CRAFT 5600 GUM. DIV.HANDLE COMPLETE N/A 64.30 74.52 69.14

MCPS12 M/CRAFT 3/4" WALL UNIONS COMP. N/A 178.81 207.34 192.20

MCPS13 M/CRAFT 3/4" PILLAR UNIONS COMP.PAIR N/A 178.81 207.34 192.20

MCPS13EXT M/CRAFT 3/4"EXT.PILLAR UNIONS COMP.PAIR N/A 178.81 207.34 192.20

MCPS14C M/CRAFT INDICES (BW)CHINA PAIR 4.95 N/A N/A N/A

MCPS16 M/CRAFT B/INLET,17 1/2" SHWR ARM,5" ROSE N/A 187.00 221.10 200.98

MCPS33 M/CRAFT PULL ROD & KNOB HEX N/A 47.70 63.60 51.27

MCPS37 M/CRAFT DIV HANDLE, CRANK, SPNDLE MC4300 N/A 102.10 111.37 109.76

MCPS41 M/CRAFT 3/4" BACK INLET CONC.SUPPLY N/A 90.24 98.63 96.99

MCPS47 M/CRAFT 8" OCT.PLATE+SCREWS PS53C(BW) N/A 103.27 136.18 110.99

MCPS47B M/CRAFT 7" OCT.PLATE+SCREWS MC3470WD(BW) N/A 103.27 136.18 110.99

MCPS50 M/CRAFT WALL MOUNTED CRADLE N/A 55.37 69.21 59.53

MCPS53 M/CRAFT THERMO VALVE + INLET BENDS N/A 772.75 851.05 830.72

MCPS53C M/CRAFT CONC.THERM VLVE+8" OCT.PLATE(BW) N/A 858.52 951.45 922.93

MCPS53C1 M/CRAFT CONC.THERMO,F.V+RECT.PLATE (BW) N/A 1129.36 1267.80 1214.04

MCPS53C2 M/C CONC THERM VLVE, 2xF.V+RCT.PLTE(BW) N/A 1400.23 1561.61 1505.23

MCPS54 M/CRAFT CRADLE COMPLETE (4300) N/A 92.36 118.19 99.32

MCPS62 M/CRAFT BENT WALL OUTLET FOR FLEX N/A 38.45 48.13 41.35

MCPS82 M/CRAFT 6455 NOZZLE C/W TUBE N/A 68.93 86.21 74.11

MCPS82A M/CRAFT 6450 NOZZLE C/W TUBE N/A 68.93 86.21 74.11

Prices and specificationsPrices and specifications are subject to changewithout notice. All prices quoted are correct atthe time of going to press.

FinishesWe aim to offer quick delivery of orders forpolished brass, chrome and nickel finishes.Orders for inca, satin and weathered finishesmay take a little longer.

QualityAll Barber Wilson bathroom products areproduced to the highest quality standards andelectroplated to British Standards: Chrome toBS1224. In addition, most fittings are testedby the WRc Evaluation & Testing Centre toensure full compliance with current waterbylaws. All products incorporating hand-heldshowers are fitted with backflow preventiondevices to comply with these laws.

Guarantee We will make good, free of charge, by repairor at our option by replacement, any goodswith defects becoming evident within aperiod of 12 months of purchase and arisingfrom defects which are attributable to us asmanufacturers. We cannot be held responsiblefor any costs incurred in correctinginstallation related faults, nor problems withelectroplated and polished finishes when ourcleaning instructions are not adhered to.


39

Index In product code number order

PS O2 19PS O3 19Q O3 34PS O5 19PS 10 18PS 16 17MCPS 16 28Q 16 SP6 34Q 16 34Q 16 EC 34PS 29 S 18PS 29 L 18PS 41 18MCPS 41 18PS 44 18PS 45 18PS 46 18PS 50 18PS 53 11GA 53 BA 12PS 53 C 15PS 53 CSQ 15PS 53 C1 16PS 53 C1-CD 16PS 53 C2 16PS 53 C2-CD 16PS 53 C3 16PS 53 C3-CD 16MCPS 53 C 27MCPS 53 27Q2 53 C 35Q2 53 D 35PS 53 CU 12PS 55 7PS 56 7PS 57 7PS 57 A 7PS 60 19PS 61 19PS 62 19Q 62 34Q 64 29TT 67 S KIT 19MC 67 S KIT 19PS 73 18PS 80 18PS 80 A 18GA 106 22RFC 260 22GA 260 22TT 280 22TT 282 22TT 284 1 22TT 284 2 22TT 284 3 22TT 284 4 22TT 679 2 7GA 900 4GA 1010 21RFC 1010 21RFC 1010 21RFC 1030 22GA 1040 21RFC 1070 23GA 1070 23

TT 1250 WS 8GA 1870 3MC 1870 24Q2 1870 31GA 1875 3Q2 1970 31GA 2010 21GA 2010 23GA 2015 21RFC 2015 21GA 2123 1MC 2123 24GA 2124 1Q2 2124 29GA 2125 1GA 2134 4MC 2134 24Q2 2134 33MC 3300 25GA 3308 5GA 3308 5MC 3308 25TT 3400 T 6TT 3400 EXP 6TT 3400 DP 6TT 3400 20MC 3400 28TT 3408 W 20TT 3408 W EXT 20TT 3408 W XXL 20TT 3410 20Q 3411 30Q 3418 W 30TT 3420 15 20TT 3420 25 20TT 3420 35 20MC 3420 15 28MC 3420 25 28MC 3420 35 28Q 3420 15 34Q 3420 25 34Q 3420 35 34TT 3425 42mm 7TT 3425 2 7TT 3425 1 7Q 3425 42 32TT 3430 19TT 3435 20TT 3450 SET 8TT 3450 WS 8TT 3450 WN 8TT 3450 WD 9Q2 3450 WS 32Q2 3450 L SET 33Q2 3450 S SET 33TT 3452 SET 8MC 3460 27MC 3470 SET 26MC 3470 WS 26MC 3470 WN 26GA 3480 SET 5GA 3480 DV 5TT 3480 DN 5Q2 3480 L SET 31Q2 3480 S SET 31

GA 3484 SET 6Q2 3484 L SET 31Q2 3484 S SET 31MC 3490 SET 25MC 3490 DV 25MC 3490 DN 25MC 3494 SET 26GA 4300 4MC 4300 25Q2 4300 32GA 4301 10GA 4302 10GA 4306 9GA 4306 9MC 4308 25Q2 4308 32GA 4309 RT 6GA 4310 RT 6GA 4311 RT 6GA 4312 RT 6GA 5300 11TT 5600 14MC 5600 14GA 5700 BA 13GA 5700 14GA 5702 BA 13GA 5702 14GA 5704 BA 13GA 5704 14GA 6000 11GA 6001 17TT 6002 15TT 6003 15GA 6008 3GA 6450 2MC 6450 24Q2 6450 30GA 6451 2Q2 6451 30GA 6452 2GA 6453 2GA 6454 2Q2 6454 30GA 6455 2MC 6455 24Q2 6455 30GA 6456 2Q2 6456 30GA 6457 2GA 6459 3GA 6470 1MC 6470 24Q2 6470 29GA 6471 1Q2 6471 29GA 6472 1GA 6475 1GA 6476 1Q2 6570 29Q2 6571 29TT 28821 BW 17Q 28821 34TT 61600 19

STYLE PRODUCT SUFFIX PAGE NO.PREFIX CODE NO.




Current listings include:

Model Number Certificate Number IRN Number Water Byelaws

GA or R 2123, 2124, 106 0307050 001, 005 N/A

GA or R 2134 0307051 001, 005 N/A

GCD/RCD/GA/MC 4300 or R 4300, 4308 0607049 + 0607050 109, 112 16, 18

GA or R 3300, 3308 9812050 101, 109 25, 16, 18

GA or R 1870 0603022 001, 140 19, 20, 21

GA or R 6450, 6455 0603023 101 25

GA or R 6475 0603020 101 25

MC 6470 9105006 101 25

MC 1870 9105016 140 19, 20, 21

GA or R 1070AE Single Flow Swanneck 0603017 101 N/A

GA or R 1070 Duoflow Swanneck 9402004 000 N/A

MC 3460 9002008 101, 109, 111 25, 16, 18, 29, 58, 73

MC 3300, 3308 9002009 101,109 25, 16, 18

MC 4300, 4308 0607049 109, 112 16, 18

MC 2123 9002014 000 N/A

MC 2134 9002015 000 N/A

5600, 5651 Valves 0210040 001, 103,111 17, 29, 58, 73

GA or R 1010AE, 2010AE, 2015AE Single Flow Swanneck 0202028 001, 006 N/A

RFC 1010AE Single Flow Swanneck 0202028 001, 006 N/A

RFC 1070 0603018 101 N/A

GCD RCD 1070 0603019 101 N/A

MC 4308 GCD/RCD/GA/R 4308 0607050 109, 112 16, 18

GCD/RCD 6475 0603021 101 25

GA or R1070 0603017

A Set Screw B ShieldC1 SleeveC2 SpringD Joint face to tap bodyE Bronze ClipF Nitrile ‘O’ Ring SealG Mobile Upper Ceramic DiscH Fixed Lower Ceramic DiscJ Stainless Steel RingK Silicone Compression WasherL Lever Handle

1 Capstan Head (handle)2 Body3 Shield4 Cover (head)5 Jumper5a Jumper Washer6 Spindle7 Packing (gland) Nut8 Backnut (flynut)9 Gland Packing10 ‘O’ Ring Seal

Ceramic disc headwork in section

Conventional screwdown tap in sectionConversion tables

Imperial Metric

Foot Head P.S.I. Metre Head Bar Litres Gallons

10 4.33 3.05 0.30 1 0.22

15 6.51 4.57 0.45 2 0.44

20 8.70 6.10 0.60 3 0.66

25 10.85 7.62 0.75 4 0.88

30 13.00 9.15 0.90 4.55 1.00

35 15.17 10.67 1.05 5 1.10

40 17.34 12.20 1.20 6 1.32

45 19.50 13.72 1.35 7 1.54

50 21.67 15.25 1.50 8 1.76

55 23.84 16.77 1.65 9 1.98

60 26.01 18.30 1.80 10 2.20

65 29.17 19.82 1.95 15 3.30

70 30.34 21.53 2.10 20 4.40

75 32.51 22.87 2.25 25 5.50

80 34.68 24.40 2.40 30 6.60

90 39.01 27.45 2.70 35 7.70

100 43.35 30.50 3.00 40 8.80

110 47.65 33.55 3.30 45 9.90

120 52.02 36.60 3.60 50 11.00

130 56.35 39.65 3.90 55 12.10

140 60.68 42.70 4.20 60 13.20

150 65.02 45.75 4.50 65 14.30

160 69.35 48.80 4.80 70 15.40

170 73.79 52.03 5.10 75 16.50

180 78.03 54.90 5.40 80 17.60

40


Conversion scale only

GENERAL - to preserve the high quality finish, rinse afteruse with clean water using a soft cloth and dry with a softchamois leather or a towel.

NEVER - use any form of abrasive. This type ofcleaner/material is not necessary if the product is cleanedregularly in accordance with the above instructions, as theywill definitely cause surface damage to all finishes. Mostsurfaces are relatively immune to attack from casual contactwith the chemicals found in household cleaners (but avoidprolonged contact). Such cleaners should be rinsed off ifnecessary, avoid rubbing.

N.B. The use of proprietary chrome, nickel and goldcleaners/polishes should not be necessary, but in any eventshould only be used in strict accordance with themanufacturers instructions.

The only marks that can be difficult to remove with a dampcloth are water stains, which can appear in hard water areas.These marks are limescale, which must be dissolved notrubbed away. Watch out particularly around the base of tapsand back of mixers for any build up of limescale. A word ofcaution: limescale is chemically the same as marble and thecleaner designed for its removal may also dissolve marblesurfaces. Alkaline soap residues, if left to dry on, will attack allplated surfaces and again must be rinsed away (not rubbed).

Proprietary limescale removers may be used but only strictlyin accordance with manufacturers instructions.

CHROME & NICKEL

The hardest of the decorative finishes, but we stillrecommend that you avoid scouring powders and abrasives.Chrome resists most chemicals but watch out for any formof hydrochloric acid such as proprietary liquid cleaner fordentures - it will dissolve the chrome in half an hour. Wipe products dry with a soft cloth after cleaning.

GOLD PLATED (INCA) FINISHES

Although the softest of the decorative finishes, it is perfectlydurable with care and is resistant to chemical attack.Dissolve any water stains at the first sign using proprietarylimescale removers (following the manufacturersinstructions). Pay particular attention to the softness of thecloth you use to towel the gold products dry after cleaning.

SATIN (VELOS) FINISHES

These finishes are available in chrome, inca and nickel. Care as for bright finishes.

COLOURS

Harder than gold, but less hard than chrome. Resistant tochemicals, but beware of nail varnish remover which willsoften most finishes of this nature. Generally care for colours like gold.

WEATHERED BRONZE

This finish is produced by first electroplating with copper.Items are then chemically aged. Copper highlights willdevelop in use, due to handling and cleaning asrecommended. Cleaning must follow the recommendationsfor all other decorative finishes as above.

POLISHED BRASS FINISH

We also supply fittings in natural polished brass. This is not lacquered or electroplated and will tarnish quickly andnaturally. To maintain the polished finish metal polishshould be used.

Care of decorative finishes

OTHER BARBER WILSONS PRODUCTS

We hope you enjoyed browsing through this catalogue but please be aware that the items shown are standardproduction lines. We do, however, manufacture many items to bespoke designs tailored to meet a client’s specificneeds and preferences. If you don’t see what you want then please do contact our sales office on 020 8888 3461 to discuss your requirements.

IMPORTANT NOTE REGARDING INSTALLATION

It is essential that thermostatic valves are installed giving full access for servicing. Where a suitable face plate is providedfor finishing it should be affixed to the wall with a thin bead of silicone sealant. Under no circumstances should valvesbe plastered in, tiled in or otherwise entombed. If practical, rear access should be provided. Failure to follow theseinstructions could nullify any warranty, and could result in damage to tiled or decorative finishes. It is essential that pipelines are flushed before fitting.

41


T R A D

B RO C HA N D

Barber Wilsons & Co LtdCrawley Road, Wood Green,London N22 6AH

Tel +44 (0)208 888 3461Fax +44 (0)208 888 2041Email [email protected]

www.barwil.co.uk

Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page bc36

Documents

Barber & Wilsons catalogue