BASIC COMMAND

http://10.145.124.68:80/cello/emas/mgw_index_stubbed.html emas for Mgw

Untuk mengecek alarm :RBS> al atau RBS> ala untuk deskripsi alarm secara lengkap………………………………………………………………………………………………………………………………………...Restart RBS via MOSHELLRBS> restartObj (Obj) Object bias berupa Node B atau PIURBS> acc o restart………………………………………………………………………………………………………………………………………...Block RBS> bl 5 5 merupakan proxy bila kita melakukan pr atau lst dari apa yang kita load (lt). Command bl bisa untuk mem-block beberapa board sekaligus.RBS> bl 5 6 9 memblock board pada proxy 5, 6, 9RBS> bl 5-12 memblock board pada proxy 5-12UnBlock BoardRBS> deb 5………………………………………………………………………………………………………………………………………...Melihat status board RBS> cab atau RBS> cabx lebih detail………………………………………………………………………………………………………………………………………...Melihat status / Nama site RBS> get untuk melihat status secara lengkap berikut parameter-parameternyaRBS> get 0 untuk melihat status dan type RBS………………………………………………………………………………………………………………………………………...Me-Load suatu objectRBS> lt (Managed Object) Object bias berupa antenna, feeder, RBS, Radio, etc………………………………………………………………………………………………………………………………………...Melihat board yang diinginkanRBS> lhsh aabbcc (command) command bias berupa vii, te log read,llog, ps port, reload/ restartaa : SMN ; bb : APN ; cc : default 00contoh :RBS> lhsh 000800 vii untuk melihat status RAXRBS> lhsh 010400 reload untuk reload TRXRBS> lhsh 010600 restart untuk restart AIURBS> lhsh 010200/port_0_dev_12 vii melihat status MCPARBS> lhsh 010600/port_0_dev_17 restart restart ASCRBS> lhsh 010600/port_0_dev_17 ? bantuan command ASCRBS> lhsh 010200/port_0_dev_12 ? bantuan command MCPARBS> lhsh xxxxxx ps untuk pencarian lebih lanjut………………………………………………………………………………………………………………………………………...Melihat log AlarmRBS> te log read atau RBS> ter atau RBS> llog status restartBila ingin sort status yang diinginkan, tambahkan | grep …RBS> te log read | grep clock melihat status yang ada clock

RBS> te log read | grep error melihat status yang ada errorRBS> te log read | grep faulty RBS> te help bantuan command te

Jika menggunakan command lt, maka akan muncul konfirmasi, pilih Y, setelah itu hajar dengan command pr atau lst.

RBS> lgs 2005-03-20RBS> lgasmi 30 RBS> lgaevs 5h RBS> lgac 30m………………………………………………………………………………………………………………………………………...Untuk melihat ProxyRBS> pr Untuk melihat status secara detail, gunakan command get.………………………………………………………………………………………………………………………………………...Melihat configuration version (CV)RBS> cvls melihat status CV terakhirRBS> cvms untuk membuat dan set CV baru………………………………………………………………………………………………………………………………………...Melihat radiolink ID dan status pendudukan kanal radioRBS> lt radioRBS> get radio no………………………………………………………………………………………………………………………………………...Apabila ingin merubah parameter, gunakan command setContoh : untuk merubah feeder delay dan redamanRBS> lt feederRBS> get antfeedercableRBS> get (proxy)RBS> set (no proxy) dl attenuation xxxxxxxxxxxx untuk setting att pada arah downlink x = merupakan nilai yang baru (12x)………………………………………………………………………………………………………………………………………...Melihat apakah ada interference di TRX atau sectorRBS> lhsh 010400 te log clear menghapus log lama pada TRX sector 1 (010400)RBS> lhsh 010400 te e trace3 trxMeasIntLevelC langsung disable, kemudianRBS> lhsh 010400 te log read

lh mod celldata -cid utrancellnya41413

…………………………………………………………………………………………………………………………………………Melihat VSWR alarm Node B

RBS>lh ru fui get vswr………………………………………………………………………………………………………………………………………...Melihat pendudukan kanal radioRBS> lt radioRBS> get radio no

………………………………………………………………………………………………………………………………………...Memilih CV yang digunakan pada saat startableRBS> cvset (name CV)………………………………………………………………………………………………………………………………………...Menambah RoutePada DOC prompt C: route print………………………………………………………………………………………………………………………………………...TxDeviceG faulty1.Site>Lt txSite>Get TxDeviceGroupChange

Lihat cabxloadHs false if txHs loadHs = true set proxyxxx loadHs false/True2.Change CV Cvls.Cvms <cvname> [<operator>] [<comment>] Cvcu melihat cv yg active………………………………………………………………………………………………………………………………………...Baca log filelhsh 001200/port_8_dev_6 te log read baca log file………………………………………………………………………………………………………………………………………...Carrier Average Rssi and Transmitted Power$pmr<= AvgRssi -80.00 Good………………………………………………………………………………………………………………………………………...Check TMAPADEMANGAN TIMUR> lt tmaPADEMANGAN TIMUR>get TMA………………………………………………………………………………………………………………………………………...Non Aktif LNA di ASC10.149.14.105> lhsh 001200/port_9_dev_19 asc lnaerr$ lhsh 001200/port_9_dev_19 asc lnaerrERROR: LNA branch A, one transistor faultyLNA transistors branch B OK10.149.14.105> lhsh 001200/port_9_dev_19 asc lnaerrset n alhsh 001200/port_9_dev_19 asc lnaerrset n aNo LNA transistor faults set for branch a10.149.14.105> lhsh 001200/port_5_dev_17 asc lnaerrlhsh 001200/port_5_dev_17 asc lnaerrLNA transistors branch A OKLNA transistors branch B OK………………………………………………………………………………………………………………………………………Check OBIF

Bekasi_Bintara> lt allBekasi_Bintara> cabxBekasi_Bintara> get OBIFBekasi_Bintara> get optical………………………………………………………………………………………………………………………………………...Check sektor statuslt utrancell182_Jamrut> lt all182_Jamrut> pr fachSET Clock NODE B$ setclock yyyy-mm-dd hh:mm:sseg:$ setclock 2006-10-26 18:39:00Print Out Clock$Readclock………………………………………………………………………………………………………………………………………...Ubah antennaSupervisionThreshold$ lt antenna$ get Antenna$ set antennaSupervisionThreshold 20 (jika 0 maka VSWR tidak tersupervisi)………………………………………………………………………………………………………………………………………...Melihat status transmisiPada EMAS RNC, jika site A down E1 harus merah. Akan tetapi jika site A down dan LED E1 hijau, hal ini pasti karena di loop ke RNC.

Pada Moshell RNC, lt E1 dan lst, jika site down dan Op state disable, maka TRS problem (open), tapi jika Op state enable, maka TRS loop ke RNC.

Check E1.MoShell> lst ImaGroup=ES-2-2-1 dis MoShell> lk <ImaLink proxy #> phyMoShell> lpr Subrack=...,Slot=..,PlugInUnit=1,Etmc41=1,Os155SpiTtp=pp1,Vc4.....MoShell> lpget <PhyPath MO proxy #>

RNC>lt allRXJKT02> for everEnter commands (one per line), then type "done"> pget 685 687 689 691 es > pget 685 687 689 691 uas> wait 1800> done ((to check performance site in E1,see the value,is there any counter in every time ? if yes,the performance is going to worse,if the value is stabil,the performance is OK )RNC> pget es1-2-1 (lihat Value pmReceivedAtmCells, pmSecondsWithUnexp, pmTransmittedAtmCells)

Error VC ete Loss of Connectivity aal5 hang$get aal5$set 4 continuityCheck false (jika True coba di false …lalu di kembalikan lagi ke posisi awal)$set 4 continuityCheck true

Check Kelerusan E1RNSBY01> strt check VC pertama dan ke dua (bila ada)RNSBY01> lt vcRNSBY01> lacc atmport=es1-24-17 eteloopback2193 AtmPort=ES1-24-17,VplTp=vp1,VpcTp=1,VclTp=vc32 eteLoopBack 0 >>> Return value = false

Atau lewat EM RNC equipment pilih MS atau ES terus pilih VC ke XX… cari E1 keXX………………………………………………………………………………………………………………………………………...Check E1 from RXIRXI> lt aal2RXI>lst iublink

RXI>lt allRXI>lst imagroup=xxxx (form vclTpId copy MS-16-1-IMA3)RXI>get porxyRXI> stcp .0 lht crossconnect yg disable

………………………………………………………………………………………………………………………………………...Melihat status RBS yang availableRNC> strRNC> str –I 1003 melihat RBS 1003RNC> lt utrancellRNC> get utrancellRNC> lst utrancellRNC> set (no proxy) primaryCpichpower (value) per 3 dB max.………………………………………………………………………………………………………………………………………...Melihat RNC ok atau gakRNC> std………………………………………………………………………………………………………………………………………...Melihat cell error codeRNC> tg………………………………………………………………………………………………………………………………………...Troubleshooting Melihat status E1site> lt E1site>pget e1 esRNC> lst………………………………………………………………………………………………………………………………………...Ubah Cell IDRJK01> lt cellRJK01> lt cell=0920RJK01> get cell=0920 localRJK01> get cell=0920RJK01> set 1489 localCellId=9201………………………………………………………………………………………………………………………………………...Block/DeBlock Cell CD12 IUBLINKRNSBY01> lt cellRNSBY01>get {IUBLINK} /Cell ID

RNSBY01>lst {IUBLINK} /Cell IDRNSBY01>bl {proxy} untuk block RNSBY01>deb {proxy} untuk deblockRNSBY01>lbl {IUBLINK} CD12 di block sekaligus RNSBY01>ldeb {IUBLINK} CD12 di deblock sekaligus ………………………………………………………………………………………………………………………………………...Block/DeBlock Sektor – UtrancellRNSBY01>lbl {utrancell} all sector di block sekaligus RNSBY01>lbl {utrancell1} sector1 saja di block RNSBY01>ldeb {utrancell} all sector di deblock sekaligus RNSBY01>ldeb {utrancell1} sector1 saja di deblock ………………………………………………………………………………………………………………………………………...RetDevice_RetNotCalibratedlt retlst retacl <proxy> actc <proxy> forceCalibration (do it twice)

Loop CommenRNSBY01> for everRNSBY01> strtRNSBY01> 5RNSBY01> done………………………………………………………………………………………………………………………………………….....Chek di RNC

RNC>get 0 untuk mengetahui type rncRNC>bo untuk mengetahui board yang ada di RNCRNC>inv untuk mengetahui inventory data modul RNCRNC>get synchroni untuk mengetahui synch RNCRNC>cab untuk mengetahui Board yang active dan standby RNC>stt untuk mengetahui port2 yang E1 tercreate di RNCRNC>lki untuk mengetahui Iub LinkRNC>uer untuk mengetahui UE yang aktif di RNCRNC>lhsh 001000 capi tot untuk mengetahu CP load RNCRNC>str untuk lihat all node B di RNCRNC>st mtp3 untuk melihat all signalingRBS>lh ru fui get vswr untuk cek vswr RNC> lst lihat all connectionRNC> hc lihat all history commandRNC> invent et lihat semua ETRNC> std lihat status device CC, CD, PDRRNC> strt lihat all ATM portRNC> bl iub untuk blok iubRNC> deb untuk deblokRNC> stc lht OAM IDRNC> get vc trafficdes lht destinasi trafficRNC> get cross vc lht crossconnect vcRBS> get cable atten lht attenuasi cableRNC> st all dis lht all disable MORNC> st equip dis lht statue equipment yg disableRNC> st all 1*0 lht all MO yg disabled

RNC> st all ^0 lht all MO yg blockedRNC> get packetdatarouter lht data PDRRNC> get utrancell hsdpauser lht all hsdpa user licenseRNC> get rncmodule=1 lht all Node B yg connect ke RNC Module 1RNC> man capi lht all manual untuk Capacity

………………………………………………………………………………………………………………………………………..

Lihat Performansi

RNC> pmrg –m 3 untuk lihat performasi RNC atau RBS………………………………………………………………………………………………………………………………………...Check Traffic and HSDPA$lt radio$get Radio$lt IubDataStreams$get IubDataStreams

For detail information

$mom all noOfCommonStreams………………………………………………………………………………………………………………………………………...Check all imsi listRJK01> ueregprint all melihat imsi yg aktivRJK01> uer (xxxIMSIXXX) all check status imsi RJK01> uer check semua imsi yg menggunakan data atau voic lengkap dgn radio ling………………………………………………………………………………………………………………………………………...Test VSWR dll 3G_ITC_FATMAWATI> lhsh 001200/port_1_dev_16 asc………………………………………………………………………………………………………………………………………...Lihat software list RNCU/ TraceRJK01> pglist – check software RNC u/ target monitor handle=43 (default handle=42)

RJK01> pgload CXC1326054_R1D01 – jika belum aktif, load software 43 di RNCRJK01> pgstart 43 – untuk mengaktifkan software 43 yg telah di loadRJK01>pgkill 43RJK01> bo – list board di RNC u/ melihat GPB mana yang akan dimonitorRJK01> lhsh 011300 te enable bus_send bus_receive RANAP* - mis GPB yang ada di Extension subrack dan di slot 13, dan kita hanya memonitor RANAP-nya sajaNB.> lhsh 011300 te enable bus_send bus_receive NBAP* > lhsh 011300 te enable bus_send bus_receive RRC* > ueenable imsi (XXXXXXimsi number) bus_send bus_receive NBAP> ueenable imsi <IMSINUMBER> bus_send bus_receiveLokasi s/w decoder[~/moshell]$ ls –l

Cara Chack All call Track[~/moshell]$ monitor6054.exe 10.24.20.9 011300 -nolocal |decoder/decoder.pl |de

coder/flow.pl –colour

KILL S/w ke 43$pgkill 43………………………………………………………………………………………………………………………………………...RXIMelihat aal2 di rxiLk .4702………………………………………………………………………………………………………………………………………...AAL2RoutingCase di Node BBila melakukan perubahan buat cv (CVMR)1. $lt aal2sp 2. $lt aal2routingcase (lihat a2ea)

$get aal2routingcase3. Lihat / dan samakan di RXI juga di RNC$lt aal2routingcase$get aal2routingcase=a2ea (contoh get aal2routingcase=620000100405232 )

Bila beda dan akan melakukan perubahan Pada Node B1. $ set 1 a2ea 620000100402999 (nilai 999 Dummy)2. Pada RXI$ rset 159 numberDirection 620000100402999 (nilai 999 Dummy)………………………………………………………………………………………………………………………………………...MSCKalau mau lihat IMSI dan LAI:mgtrp:msisdn=6285851100071;mgssp:imsi=510015090000071;jika ordered ---> tekan ESC

check teregister di 3Gmgslp:imsi=510108913009899,all;

Integrasi: !Site Name: Daeng Sirua!!Sector 1!MGAAI:AREA=UP61341,SAI=510-10-9511-61341; MGAAC:AREA=UP61341,RO=0,CO=0,EA=0;MGAAP:AREA=UP61341;

!Sector2!MGAAI:AREA=UP61342,SAI=510-10-9511-61342MGAAC:AREA=UP61342,RO=0,CO=0,EA=0;!Site Name: Daeng Sirua!

Signaling m3asp

CP STATEdpwsp;

CEK MSC HEALTH1. Processor Loadplldp;

2. Active callssaaep:sae=1;arldp:apclnk=all;

3. Check for hangingssyfap:minutes=10;

4. Check for Forlopps/restartssyrip:survey;

Software Error5. syrip:survey;syrip:event=36,print=jam;

5. Check SAE congestiondbtsp:tab=saactions;dbtsp:tab=saefaults;

6. Check alarmsallip;

7. Check MGw errorserepp:enum=all;

8. Check charging congestionsaaep:block=chop,sae=500;

9. Check routesstrsp:r=routes;

10. Check signallingm3rsp:dest=all;

11. Check MGw Availabilitynrgwp:mg=all;

12. Size altation of data files size chage Requireddbtsp:tab=saactions;saali;

allip;dbtsp:tab=saactions;saaep:sae=all,block=mrnr;dbtsp:tab=saactions;sybue;saaii:sae=504,block=mrnr,ni=700;

saali;

………………………………………………………………………………………………………………………………………...Cara Cepat Baca Alarm$lt Plu untuk melihat plugin unit lebih detail$lst $get Proxy disable ………………………………………………………………………………………………………………………………………...CV InventoryRNC>l+                ==>to store the fileRNC>inv               ==>to get inventory of RNCRNC>l-                ==>to end the store file.………………………………………………………………………………………………………………………………………...HSDPA for check maxHsRate3G_PI_MALL> lt IubDataStreams3G_PI_MALL> get IubDataStreamsmaxHsRate 15 for 1 E1………………………………………………………………………………………………………………………………………...(4 commands below are to be executed on RNC when the Heartbeat Failure on RNC only),Telnet or moshell to RNC. We only have a few minutes to execute the command before the JVM recovered. Your help is appreciated.

RNC> lhsh 001200 capi totRNC> lhsh 001200 capi type pri (about 2 minutes of logs displayed on screen)RNC> lhsh 001200 capi type pri 30RNC> lhsh 001200 ps -bw JVM………………………………………………………………………………………………………………………………………...Signaling MGW$st mtp3bsrsCheck HW_VIG, HW_MGW, dll………………………………………………………………………………………………………………………………………...Check Temp

$lh ru fui get temp ………………………………………………………………………………………………………………………………………...Log alarm

$lga$ lgasmi 30 ………………………………………………………………………………………………………………………………………...………………………………………………………………………………………………………………………………………...………………………………………………………………………………………………………………………………………...

Salah satu Penyebab Common Channel down1 .Check RJK01> lk iublink=1003Looks PROXY 6574 6573, Aal5TpVccTp disable, and I look that2. 3G_PERS_BLD>lt aal53G_PERS_BLD> get 1333 1334 Aal5TpVccTp Looks…..continuity check set to true, and I check in RBS 3. RJK01> set 6574 continuityCheck falseIn RBS continuity check set to false…..So change continuity check in RNC to false :………………………………………………………………………………………………………………………………………...CEK SCRAMBLING CODE/ PNCODERJK01>lt allRJK01> get all primaryScramblingCode Atau:RJK01> get utrancell=4184 primaryScramblingCode - utk satu cell………………………………………………………………………………………………………………………………………...CEK PARAMETER CELL RNC1> lt utrancellRNC1> get 13091 cell 1309 sektor 1………………………………………………………………………………………………………………………………………...CEK STATUS CROSSCONNECTRXI>> stc 2051 --> show all crossconnections where the information matches "2051" (in the case below, where the atmport is 2051) RXI >> stc .* 0 --> show all crossconnections that are disabled.………………………………………………………………………………………………………………………………………...CEK STATUS IubLinkRNSBY01> lst .1040………………………………………………………………………………………………………………………………………...CEK STATUS CELLRNSBY01> str | grep 1040………………………………………………………………………………………………………………………………………...CEK STATUS CELLRNSBY01> lst .SBY040……………………………………………………………………………………………………………………………………...CEK INTERFERENCERNJKT01> tgd cell=51361 ulinterference celldata cell 5136 sektor 1Atau:RNJKT01> dyncelldata cid 51361

CEK ULINTERFERENCE

RCN>tgd cell ulinterference………………………………………………………………………………………………………………………………………...

Check HSDPA:$ Lt iubdata$ get IubDataStreamsCheck Exp :

IubDataStreamsId 1maxHsRate 60noOfCommonStreams 14noOfDedicatedStreams 17userLabel

noOfCommonStreams = n*4maxHsRate 15= 1E1

keterangan mom all maxHsRate………………………………………………………………………………………………………………………………………...MSC check USER mgsvp;

TOTNSUB (yg attah ke 3G58051

TOTNSUBA (yg pakai 3G)44738

Menghilangkan MT Authentification FaultMGAAR;

Check Blocking supervisionStpdp:r:msja2t i/o;Exdep:dev=updr-3329&&-3359;Ntcop:snt=rtdma-104;Exrop:r=msja2t i/o;C7spp:sp=all;

………………………………………………………………………………………………………………………………………...Tracert IP or OAM problem

Lst .iubGet proxy Lacc eteloopback

………………………………………………………………………………………………………………………………………...KILL JVM RNC

TELNET IP RNC$lhsh 001200 pglist –e$lhsh 001200 pgkill 8 (List no 8 handle Java)

………………………………………………………………………………………………………………………………………...

Tracert

CEK MGW

How to clearing alarm MTP3 route set unavailabel

1. Check capacitylhsh xxxx00capi tot (on all boards)

2. Check te error loglhsh xxxx00 (need to check all boards)te log read

3. check disksmirror statlhsh 000300 mirror stat

4. Use OSS/EMAS to check alarms

5. Use OSS/EMAS to check signalling and routes 6. Check hardware

vii (on all boards)………………………………………………………………………………………………………………………………………...EXECPTION$cd moshell$cd excep

run

$cat EXCEP_070505_1600.log | egrep RRCConRel | egrep -i exception | egrep 56028 | sed 's/ = /=/g' | awk '{ print $4 " " $7 " " $11 }' | sort -n | uniq -c | sort +1n$cat EXCEP_070505_1600.log………………………………………………………………………………………………………………………………………...get utrancell=48231 sf8adm|sf16adm|sf32adm

UtranCell=48231 sf16Adm 16UtranCell=48231 sf32Adm 32UtranCell=48231 sf8Adm 8 64 = sf32adm di set 32 yg lain 0128 = sf32adm diset 32 sama sf16adm diset 16 yg lain 0384 = semuanya si set aktiv ………………………………………………………………………………………………………………………………………...

HOW TO REMOVE THE BOARD AND REPLACE WITH DIFFERENT BOARD :

* FOr remove and delete the board from NODE :1. Lock the board2. Go to Software allocation --> Right click property 3. Move the software for the board that want to remove from right to left4. Go to Equipment and select the board --> Right click and Delete

* For Add the new board to NODE:1. Go to software allocation --> Right click property2. Add the new software board from left to right3. Go to moshell --> do command --> lt all --> pr managed

--> get 1--> See AutoConfiguration allow --> the state should be

TRUE4. Plug-in the new board.5. Restart the new board and wait until the board synchronize to the NODE………………………………………………………………………………………………………………………………………...HOW TO UPGRADE SOFTWARE RBS & RNC FROM OSS

1. Install the Upgrade Package software to OSS, dont forget to unzip the file in OSS with command :

-->unzip <Name_of_file>2. Run RANOS (WCDMA RAN OSS Explorer) -->GO to Configuration menu --> chose Hardware and Software management --> choose SMO3. Go to software menu in SMO, choose the software-->right click choose Synhcronize CPP SW Package4. Go to Network menu --> Find RBS or RNC that want to Upgrade --> right click and choose Upgrade5. Choose software upgrade and click next6. Dont thick the "Use associated software FTP service for each NE" and choose "UTRAN SOFTWARE"7. In TAB Jobs Configuration --> Thick the 2 upper point --> Installation (Immediate)

--> Verify Upgrade (Manual)8. Click NEXT and in Paramaeter choose Software and In Installation load module transfer type choose FULL9. Go to JOBS menu and see the progress/log of Install Software (wait until it show the activity install complete) after activity install complete10.Go to NE Thread again, right click and select Start NE Threads --> this activity will upgrade the node go to JOBS menu and see the progress/log of Upgrade (wait until it show the activity upgrade complete)11. After the upgrade complete back to NETWROKS menu right click and choose ADJUST12. In menu adjust thick All Filters and Jobs scheduling Immediate13. Go to JOBS menu and see the log, wait until Adjust activity complete14.Go to network menu Choose RBS or RNC want to Upgrade, right click choose Upgrade.15. In Jobs Configuration Thick Upgrade "Immediate", Confirm Upgrade "Manual" and SWAdjust "Manual"16. TAB Upgrade choose Reboot Node upgrade

17. See progress in Jobs menu18. If activity upgrade complete go to NE Threads -->choose the NODE and right click and choose Start NE Thread

19. Go back again to NE Threads to verify the Software Adjusment by right click and choose start NE Thread again20. FINISH UPGRADE ACTIVITY