Battery Powered

Strapping Tools

OMNI-TUFF Suggested Method [03-ITA24 & 03-ITA25]

Passionate about Preventing Wastage

Omni-tuff GroupTel: 1300 662 987 Fax: 1300 852 987

Email: sales@omnituff.comwww.omnituff.com

WELD ADJUSTMENT

2. Hold down weld button until illuminated numeral flashes

1 = Minimum intensity

9 = Maximum intensity

TENSION ADJUSTMENT

2. Hold down tension button until illuminated numeral flashes

1 = Minimum tension

9 = Maximum tension

1. Switch on tool by pressing the number '1' button once. Machine will

beep and green LED will flash.

1. Switch on tool by pressing the number '1' button once. Machine will

beep and green LED will flash.

3. Once it is flashing, continue to press weld button until the required intensity

is reached.

3. Once it is flashing, continue to press tension button until the required tension

is reached.

WELD & TENSION GUIDE

2

Three options:

1. MANUAL (Tool Operation - Page 5)

2. SEMI (Tool Operation - Page 6)

3. AUTOMATIC (Tool Operation - Page 6 & 7)

3. Whilst flashing, press button until desired mode position illumunates i.e. Auto, Semi, Man

1. Switch on tool by pressing the number '1' button once. Machine will beep and green LED will flash.

Hold down the SET button until LED flashes in bar at mode position

MODE ADJUSTMENT

MANUAL SEMI AUTO

3

1. Pass strap over package

2. Align strapping

3. Clench lever and position strap in tool

TOOL OPERATION - MANUAL MODE

STRAPPING METHOD

4

2. Press button 2 to complete welding and cutting of

strap; a beep signals completion of process.

1. Press and hold down button ONE until desired

tension is achieved - and release.

3. Clench the release lever to release strap from tool.

Slide tool away.

TOOL OPERATION - MANUAL MODE

TOOL OPERATION - SEMI-AUTOMATIC MODE

5

1. Press button ONE once to release safety mechanism

WARNING: Ensure that your

job can sustain

tension setting

before engaging

automatic mode.

2. Clench the release lever to release strap from

tool. Slide tool away.

1. Press and hold down button ONE until tensioning

and friction weld is heard; a beep signals completion

of process. Then release.

TOOL OPERATION - SEMI-AUTOMATIC MODE

TOOL OPERATION - AUTOMATIC MODE

6

3. Clench the release lever to release strap from

tool. Slide tool away.

2. Press button ONE for one second. This activates

the tension and welding function. The beep signals

completion of process. Then release.

TOOL OPERATION - AUTOMATIC MODE cont.

7

8

Service Request

Receipt Details

Date despatched / / Time : am/pm Date required / / Time : am/pm

Customer

Company Contact name Address Phone number

Mobile number Suburb Order No.

Details of Service Request

Item Serial No. Description Faults

Completion (Tech Dept. to complete)

SR No. Date Technician Signed Returned Date Method

Omni-tuff GroupP O Box 2039 MARYBOROUGH QLD 4650

2 Activity Street MARYBOROUGH QLD 4650 Tel: 1300 662 987 Fax: 1300 852 987 Email:

sales@omnituff.com ABN: 54 439 047 203 ACN: 137 478 490

9

LOOKING AFTER YOUR ITA TOOL

Congratulations on your purchase of a high quality Italian made ITA Battery

Powered Strapping Tool! We are sure you will reap your money’s worth of

efficiency and more! However, your tool will need regular maintenance to keep in

top performance. Some tasks can be easily carried out by you or your team, as

explained below. However, like a quality car, professional servicing is also of high

importance. Please see Page 2 which outlines suggested service intervals etc.

(PLEASE NOTE: WARRANTY COVERS FAULTY PARTS/WORKMANSHIP ONLY.

WARRANTY WILL BE VOID IF SERVICE/MAINTENANCE IS NEGLECTED)

IMPORTANT MAINTENANCE TO BE CARRIED OUT BY YOUR TEAM

1. Weekly blowing out of the strap tensioning/welding area with compressed air.

If there is no compressor available, we suggest the investment of an aerosol

can of compressed air. This task will ensure buildup of dust/strap deposits is

kept to a minimum. Please refer to the safety guide for your compressor.

2. DO NOT POKE ANY METAL OR SHARP OBJECTS INTO YOUR TOOL AS IT

COULD RESULT IN DAMAGE TO FEEDWHEEL TEETH AND GRIPPER

PLATES.

3. Tool must be kept dry at all times.

Omni-tuff GroupP O Box 2039 MARYBOROUGH QLD 4650

2 Activity Street MARYBOROUGH QLD 4650 Tel: 1300 662 987 Fax: 1300 852 987 Email:

sales@omnituff.com ABN: 54 439 047 203 ACN: 137 478 490

10

Dear Customer Thank you for your purchase from us of the ITA battery-operated strapping tool. We have no doubt you are finding it a very valuable asset for your team’s productivity.

Please find below a chart showing Italy’s suggested service intervals to maximize your tool’s performance.

USAGE SERVICE INTERVAL

Please speak to our technical support team to get some more details as to maintenance tasks that can easily be performed by your own team and what is usually sent to our technical department, to service on your behalf.

(PLEASE NOTE: WARRANTY COVERS FAULTY PARTS/WORKMANSHIP ONLY. WARRANTY WILL BE VOID IF SERVICE/MAINTENANCE IS NEGLECTED)

We do offer a customer support program where one of our team will call and remind you of each service due.

If you wish to be entered onto our “Reminder for Service” list, please fill in the form at the foot of this page and fax back.

We shall look forward to being of further help to you….

Kind regards from the Team

REQUEST FOR “REMINDER FOR SERVICE” FORM

Company Name………………………………………………………………...

Contact ………………………………………………………………………….

ITA TOOL 20 / 21/ 23 / 24 / 25 (Please circle)

Usage: High / Moderate / Low (Please circle)

Please fax this sheet to 1300 852 987 or email to sales@omnituff.com

First purchase

Use on continuous shift basis

Use on single shift basis

3 months (complimentary)

6 months

12 months