Bc Conduit Catalog

8/20/2019 Bc Conduit Catalog

1/34


2/34002BCCON0213

ISO 9001:2008 American Systems Registrar

Certificate No: 5107

INTERTEK ETL SEMKOConduit Systems: Medium Duty

Sizes: 20/25/32/50 mmTest Report Ref: 1301827-1

S INTERTEK Certification for

Medium, Heavy & Extra Heavy Duty ConduitsCertificate Ref: 1301827

S INTERTEK Certification for Junction Boxes

Certificate Ref: 1313485

INTERTEK ETL SEMKOConduit Systems: Heavy Duty


INTERTEK ETL SEMKOConduit Systems: Extra Heavy Duty


S INTERTEK Certification for

Fittings & Accessories for ConduitsCertificate Ref: 1313493


3/34

BC CONDUIT

IEC, BRITISH & EUROPEAN SYSTEM

AMERICAN SYSTEM


4/34

AREA Bahra Cables Company has a total land area of about 300,000sqm at disposal.

The built-up area, including offices and plant, of start up phase is more than 100,000sqm.

GENERALINTRODUCTION

BC Conduit has started production of a variety of high quality unplasticised polyvinyl chloride (UPVC)

compounds in its state-of-the-art factory in Bahra, which has an annual output capacity of over 36,000

tons.

The company sources UPVC feedstock for the new factory from Saudi Basic Industries Corporation

(SABIC) to produce the granule used for jacketing and insulating the cables. SABIC is one of the world’s

largest manufacturers of UPVC and the sole producer in Saudi Arabia.

The factory built with the expertise of Buss Company of Switzerland, is completely integrated and

equipped with the latest technologies in the field.

The ability to manufacture UPVC compounds improves BCC’s control over the material used in its cable

and wire production, reduces product cost and adds higher performance values to its products.

The new factory also eliminates the need for local sourcing of UPVC compounds, ensures superiorquality production of cables and creates more career opportunities in the region at the same time.

1


5/34

BC CONDUITMATERIAL SPECIFICATIONS

MATERIAL INTRODUCTION

Unplasticised Poly(Vinyl Chloride), commonly known as UPVC, was first recognized and characterizedmore 110 years ago, but due to its poor thermal stability making processing difficult, it was potentially

introduced to the market only by 1930.

The problem caused by poor thermal stability were overcome by development of suitable stabilizers

systems and UPVC is now one of the world’s leading synthetic polymer having very diverse applications.

The ability to change its properties, by the addition of plasticisers, from a hard rigid material to one that

is soft and flexible enables a wide variety of processing equipment to be used to produce an almost

limitless range of products to a thick cream.

UPVC is used for the production of extrusions and molding. And it is universally accepted as having themost suitable properties for use within the electrical industry.

BC Conduit StandardsBC Conduit UPVC products are manufactured in accordance with the British Standards, American

Standard, SASO Standard, and UL Standards.

(*BS 6099: Part 1; Conduit for electrical installations. Specification of general requirements, is

superseded, withdrawn and replaced by BS EN 50086-1.

BS EN 50086-1; Conduit for electrical installations. Specification of general requirements superseded

and replaced by BS EN 61386-1).

BS EN 61386 (IEC 61386), Conduit Systems for cable management.

SASO (Saudi Standards, Metrology and Quality Organization) and GSO (Standardization Organization

for GCC). GSO 33; Plastic Conduits and Fittings for elctrical installations.BC Conduit UPVC materials used and tested in accordance with the British Standards (BS 4607: Part 1

and BS 476: Part 7).

IEE Wiring Regulations: Bahra System complies with all the relevant requirement of the latest edition

of the BS 7671 (IEE Wiring Regulations).

Product Certifications and ApprovalsBC Conduit is registered for ISO 9001, certified by American Systems Registrar (ASR).

BC Conduit is certified for European Product Safety for the following products:

• Medium, heavy and extra heavy duty grade type conduits Ref. 1301827• Fittings and accessories for conduits Ref. 1313493

• Junction Boxes Ref. 1313485

BC Conduit satisfies provisions for CE marking, according to Low Voltage Directive 2006/95/EC.

BC Conduit’s conduits & accessories are resistant to external influences according to following IP Codes:

• Extra Heavy duty conduits and accessories IP66

• Heavy and Medium duty conduits and accessories IP55

• Junction Boxes IP50

2


6/34

BC CONDUITMATERIAL SPECIFICATIONS

BC CONDUIT MATERIAL PROPERTIES

Thermal Properties All BC Conduit UPVC products are planned to hold local thermal expansion. Fitting procedures andinstruction required to deal with the different movement at the interface with the building fabric.

Coefficient of linear expansion(Conduits) : 5.5 x 10-5 per C (5mm/3000mm with a temp. rise of 25oC).Coefficient of linear expansion (Trunking) :23 x 10-6 per C (1mm/m for 40oC rise).Operating Temperature : -5oC to 60oC (Minimum and Maximum Temperature)

Vicat Softening Point: 81oCThermal Conductivity : 0.19W/m/k

Chemical PropertiesBC Conduit UPVC(Chemical Resistance) is non corrosive (corrosive free) & not affected by sea water. It

has excellent resistance to mineral acids, alkalines and detergents, good resistant to alcohols , but liableto attack from solvents such as ketones, aromatics and hydrocarbons.* Corrosion only occur, to any extent when ph is less than 3 or greater than 9.

Mechanical PropertiesBC Conduit UPVC products (Impact Resistance under normal climatic conditions, BS EN 50086 or itsreplacement IEC 61386-21 (formerly BS 6099)).

Electrical PropertiesBC Conduit UPVC products are non conductive.Dielectric Strength : 40 kV/mm in DBP Resistivity : 1014 Ωcm 17 kV/mm in Tx oil Resistance to 0.03 ohm rnm²-/m

Workability, Durability & Maintenances All BC Conduit UPVC products are light weight and can be readily cut & drilled with hand tools. Shortcomponent length can be readily included, reducing wastage of material. The covers & accessories aremanufactured under fine tolerances to ensure a tight fit with ease of removal. Also can be cleaned with

wet cloth & household detergents (neutral 5/7 pH value), possible to decorate also with commercialpaint. Resistant to staining. Stop ends are tenable to the carriers. All BC Conduit products can maintainedtheir high performance characteristics and stable.

3


7/34

BC CONDUITTECHNICAL

BC CONDUIT AND FITTINGS

Description:BC Conduit high impact UPVC conduit offers a cost effective solution for both new and renovationscontracts. The conduit available in sizes each with 4 different grades. The wide ranges of our fittings& supplementary products resources that almost any installation can be specified with confidence. Theconduits of BC Conduit easily cut using hacksaw or snips due to its light weight and also bent colddue to its smaller sizes. Thanks to these advantages, installation will be 50% quicker than using steel.Modification and repairs are quicker and simpler to be done.

Features:• Wide ranges of section and sizes.• 4 Grades of round conduit to suit various site situation.• Quicker, simpler and fast installation.

• Very wide ranges of component maximize versatile applications.• Round, oval and corrugated divisions are compatible.

Mechanism:Below is a list of available mechanism by name only:- Heavy Gauge Couplings- Bell Mouth Bushes/Sleeves- Expansion Couplings- Male/Female Bushes- Inspection Couplings- Plugs- Strap Saddles- Reducers

- Quickfit Spacer Saddles- Locknuts- Spacer Bar Saddles- Lockrings- Spring Clip Saddles- Adaptors- Conduit Clips- Bending Springs

- Quickfit Inspection Elbows- Normal Bends- Quickfit Inspection Tees- Compression Glands- Inspection Tees- Inspection Elbows

Boxes and AccessoriesBelow is a list of available boxes & accessories by name only.- Circular Boxes- Tee Boxes- Terminal Boxes

- Intersection Boxes- Through Boxes- Tangent Boxes

- Branch Boxes- Heat Resistant Boxes- Angle Boxes

4


8/34

BC CONDUITTECHNICAL

BOXES AND ACCESSORIES

CONDUIT (ROUND SECTION HEAVY GAUGE HIGH IMPACT)

Accessories

- Extension Rings - BC Conduit Solvent Cement- Steel Insert Clip - BC Conduit Snip Cutter

- Earthing Ring - Nylon Draw Tape

- Brass Earthing Terminals

Conduit Boxes

- Adaptable Boxes - Bahra Earth Electrode Box

- Square Junction Boxes - Bahra Circular Lids and Gaskets

Switches and Socket Boxes

(The wide ranges are available in different depths with assorted of knockouts points). Observe the table

at the conclusion of this technical sector.

For classic conduit installation this provides a high degree of fortification or safety.

Temperature range: -5OC to 60OC (Minimum and Maximum), complies with BS 6099 section 2.2

Heavy Mechanical Stress (Section 2.2) complies with all related requirements of 16th edition of IEE

Wiring Regulation and provides high degree of fortification or safety.

Cable Capabilities of Conduit

The technique which can be used to establish the size of conduit or trunking required to hold cables

of the same size, or different sized. The number of cables arrange in an enclosure of a wiring system

shall be such that no damage is caused to the cables or to the enclosure during their installation. The

process employs a unit system, each cable size being allocated a part. The sum of all parts for the cables

intended to be run in the same enclosure is evaluate against the parts given for the conduit in order to

decide the size of the conduit required to hold those cables.

Note: Standard Length 2.9 meters

Outside W.Thickness Weight Cross Section

θ (mm) (mm) (kg/m) Area(mm²)

20 1.8 0.150 209

25 1.9 0.205 350

32 2.5 0.322 573

38 2.5 0.394 859

50 3.2 0.684 1506

5


9/34

BC CONDUITTECHNICAL

Types of RunIt has been required for conduit to distinguish the run exceed 2.9m (the run not exceeding 2.9 metersin length) and runs of any length put in bend or sets as:

1. Straight Run not exceeding 2.9 meters in length.2. Straight Run exceeding 2.9 meters in length.

(The word “Bend” signifies a British Standard 90o Bend and one double set is equivalent to one bend)

Case 1. Each conduit size is represented by only one part.Case 2. Each conduit size has a inconsistent part which is dependent on the length of run and thenumber of bends or Expansion Couplings. For a certain size of cables the part allocated to case 1 is notthe same as case 2 above.

Variable Factors (Inconsistent Part) Different variable parts affect the effort to arrive at a standardmethod of evaluating the capability of conduit. Some of these are the following:- Tolerance in cables sizes - Reasonable Care (of drawing in)

- Tolerance in conduit - Acceptable use of the space available

15 YEARS GUARANTY

BC Conduit shall guaranty and warranty the supplied UPVC conduits and accessories for a period of 15years for indoor use only, from the date of delivery against the products malfunction due to material,

workmanship and manufacturing defects.

BC Conduit guaranty and warranty shall not apply if the customer uses or installs the products improperly, when such an improper use is judged using the national and /or internationally recognized standardsand codes of the electrical Industry.

The Guaranty shall not extend to items not manufactured by BC Conduit, or to any damages or defectsresulting from the use of products in a manner other than what these intentionally designed for, nor themishandling or misuse during their transport or storage.

Conduits, Grades, Area and WeightsBC conduits are manufactured and tested as per IEC / EN 61386 (previously BS 6099) to withstand a

wide range of impact and compression forces starting with Medium Duty (3321) for flush and serviceapplications, Heavy Duty (4421) for ceiling and wall installations, and Extra Heavy Duty (5521) forinstallation inside bulk concrete in temperature range of -5oC to 60oC.

The following table shows the Nominal Dimensions of each type:

* Extra Heavy Duty also available.

Medium Heavy Medium Heavy Extra Heavy

OutsideDiameter (mm)

Nominal Thickness (mm) Internal Area (mm2)

20 1.6 1.8 222 211 206

25 1.8 1.9 360 353 327

32 2.1 2.5 607 573 552

38 2.2 2.5 887 855 804

50 2.5 3.2 1590 1493 1439

6


10/34

IEC, BRITISH & EUROPEAN SYSTEMTECHNICAL INFORMATION

IEC, BS & EN STANDARDS


11/34

TECHNICAL INFORMATIONIEC, BS & EN STANDARDS

CABLE CAPACITIES OF CONDUITS(Based on Appendix 12 IEE Regulations 17th Edition to the latest edition)

1. For each cable it is intended to use obtain the appropriate cable factor.

2. Add all the cable factors so obtained and compare with the factors for conduit/trunking.

3. The size of trunking/conduit which will satisfactorily accommodate the cables is that size

having a factor equal to or exceeding the sum of the cable factors.

Single core UPVC insulated cables in straight runs of conduit not exceeding 3m in length

Single UPVC insulated cables in straight runs of conduit exceeding 3m in length or in runs of any length

incorporating bends or sets

Type of Conductor

Cable Factor Conduit Factor

Conductor Cross

Sectional Area(mm²) Factor Conduit

Diameter (mm) Factor

Solid

1 22 16 290

1.5 27 20 460

2.5 39 25 800

32 1400

Stranded

1.5 31

2.5 43

4 58

6 88

10 146

Type of Conductor Conductor Cross Sectional

Area (mm²)

Factor

Solidor

Stranded

1 16

1.5 22

2.5 30

4 43

6 58

10 105

4 58

8


12/34

FIXING According to IEE regulations the following table shows the recommended distances between fixings.

Distance between fixings for conduit

TECHNICAL INFORMATIONIEC, BS & EN STANDARDS

ConduitSize in

mm

Maximum distance between fixings in meters

Metal Plastic Pliable

Horizontal Vertical Horizontal Vertical Horizontal Vertical

16 0.75 1 0.75 1 0.3 0.5

20 1.75 2 1.5 1.75 0.4 0.6

25 1.75 2 1.5 1.75 0.4 0.6

32&38 2 2.25 1.75 2 0.6 0.8

Over 40 2.25 2.5 2 2 0.8 1

9


13/34

IEC, BRITISH & EUROPEAN SYSTEMIEC, BS & EN CONDUIT SYSTEM


14/34

HEAVY DUTY UPVC CONDUIT *

IEC CODE 4421 1250N

EXTRA HEAVY DUTY UPVC CONDUIT *IEC CODE 5521 4000N

ItemCode

NominalSize

(O.D.)

MinimumInside

Diameter

WallThickness

StandardPacks

BulkPacks

mm mm mm Pcs Mtrs Pcs

BSP 2 20 16.0 1.8 50 145 4550

BSP 3 25 20.7 1.9 40 116 2880

BSP 4 32 26.5 2.5 20 58 1800

BSP 5 38 32.5 2.5 20 58 1300

BSP 6 50 43.0 3.2 10 29 720

ItemCode

NominalSize (O.D.)

MinimumInside

Diameter

StandardPacks

BulkPacks

mm mm Pcs Mtrs Pcs

BEP 2 20 15.2 50 145 4550

BEP 3 25 19.7 40 116 2880

BEP 4 32 26.3 20 58 1800

BEP 5 38 32.0 20 58 1300

BEP 6 50 43.1 10 29 720

Available in 2 colors: Black and White. When ordering use color suffix BK WT


11

2006/95/ECLow Voltage Directive


* Manufactured According to BS 6099, EN 61386 (IEC 61386), Standard length 2.9m. Other lengths available on request

Ref: 1301827


15/34

MEDIUM DUTY UPVC CONDUIT *IEC CODE 3321 750N

LIGHT DUTY UPVC CONDUIT *IEC CODE 2221 320N

ItemCode

NominalSize

(O.D.)

MinimumInside

Diameter

WallThickness

StandardPacks

BulkPacks


BMP 2 20 16.5 1.6 50 145 4550

BMP 3 25 20.9 1.8 40 116 2880

BMP 4 32 27.3 2.1 20 58 1800

BMP 5 38 33.1 2.2 20 58 1300

BMP 6 50 44.4 2.5 10 29 720

ItemCode

NominalSize

(O.D.)

MinimumInside

Diameter

WallThickness

StandardPacks

BulkPacks


BLP 2 20 17.2 1.2 50 145 4550

BLP 3 25 21.7 1.4 40 116 2880

BLP 4 32 28.5 1.5 20 58 1800

BLP 5 38 34.5 1.5 20 58 1300

BLP 6 50 45.6 1.9 10 29 720

* Manufactured According to BS 6099, EN 61386 (IEC 61386), Standard length 2.9m. Other lengths available on request



12



Ref: 1301827


16/34

STANDARD COUPLING

EXPANSION COUPLING

BENDS-HEAVY GAUGE WITH BELL ENDS

BENDS-HEAVY GAUGE WITH COUPLINGS

Item Code Size (mm) Standard Packs Bulk Packs (Pcs)

BSC 2 20 100 20,000

BSC 3 25 100 10,000

BSC 4 32 25 5,000

BSC 5 38 25 2,500

BSC 6 50 20 2,000


BEC 2 20 50 800

BEC 3 25 25 625

BEC 4 32 20 260

BEC 5 38 10 250

BEC 6 50 10 120


BLB 2 20 30 3,000

BLB 3 25 15 1,500

BLB 4 32 100 600

BLB 5 38 60 360

BLB 6 50 25 150


BNB 2 20 30 3,000

BNB 3 25 15 1,500

BNB 4 32 100 600

BNB 5 38 60 360

BNB 6 50 25 150



All above products available in 2 colors: Black and White. When ordering use color suffix BK WT

Ref: 1313493

13


17/34

ROUND SPRING CLIPS

FEMALE ADAPTORS

MALE ADAPTORS

MALE THREADED BUSH

FEMALE THREADED LOCKRINGS


BCC 2 20 200 5200

BCC 3 25 100 4000


BFA 2 20 100 20,000

BFA 3 25 100 10,000BFA 4 32 25 5,000

BFA 5 38 25 5,000

BFA 6 50 20 3,000


BMA 2 20 100 20,000

BMA 3 25 100 20,000


TBM 2 20 100 20,000

TBM 3 25 100 20,000

TBM 4 32 100 2600

TBM 5 38 50 2000

TBM 6 50 25 1000


TLF 2 20 100 20,000

TLF 3 25 100 20,000




Ref: 1313493

14


18/34

INSPECTION ELBOWS

INSPECTION BENDS

INSPECTION TEES

STRAP SADDLES

SADDLE WITH BASE


BIE 2 20 25 650

BIE 3 25 25 400


BIB 2 20 25 400

BIB 3 25 20 320


BIT 2 20 20 520

BIT 3 25 20 320


BPS 2 20 200 40,000

BPS 3 25 200 40,000

BPS 4 32 100 20,000

BPS 5 38 25 2000

BPS 6 50 25 1300


BSB 2 20 100 20,000

BSB 3 25 100 20,000

BSB 4 32 100 10,000

BSB 5 38 25 1000

BSB 6 50 25 650



15


19/34


20/34

ANGLE – TWO WAY BOX

TEE – THREE WAY BOX

INTERSECTION – FOUR WAY BOX

U – TWO WAY BOX

Y – THREE WAY BOX

H – FOUR WAY BOX


2/BRB/4 20 25 2,500

3/BRB/4 25 25 2,500


2/BRB/5 20 20 2,000

3/BRB/5 25 20 2,000


2/BRB/6 20 20 2,000

3/BRB/6 25 20 2,000


2/BRB/12 20 25 2,500

3/BRB/12 25 25 2,500


2/BRB/13 20 25 2,500

3/BRB/13 25 25 2,500


2/BRB/14 20 25 2,500

3/BRB/14 25 25 2,500




Ref: 1313485

17


21/34

CIRCULAR LIDS

RUBBER GASKET

CIRCULAR JUNCTION BOXES FITTED WITH RUBBER GASKET, LID & SCREWSCircular Junction Boxes Fitted With Rubber Gasket, Lid & Screws - Circular Boxes can be suppliedassembled with rubber gasket, lid & screws. E.g. Item codes for 20mm 2 way through circular junctionbox DJT 2 should be suffixed with/RG as DJT 2/RG

Heavy Gauge springs are suitable for heavy & medium gaugeround conduits while light gauge springs are suitable for lightgauge round conduits

BENDING SPRINGS


BSL 2 15 200 40,000


BRG 66 100 2600

HeavyGauge

Item Code

ConduitSize (mm)

Light GaugeItem Code

Bulk Packs

BSS H2 20 BSS L2 -

BSS H3 25 BSS L3 -

UPVC CEMENT

Item Code Size (ml) Standard Packs Bulk Packs (Pcs)

BSG 1 118 48 -

BSG 2 237 24 1008

BSG 3 473 12 600

BSG 4 946 6 -

Available in 118ml, 237ml, 473ml and 946ml cans with applicator.Suitable for use with BC UPVC conduit, trunking & fittings.



18


22/34

TERMINAL ONE WAY & BACK OUTLET

THROUGH TWO WAY & BACK OUTLET

ANGLE TWO WAY & BACK OUTLET

TEE THREE WAY & BACK OUTLET


2/BRB/7 20 20 3,000

3/BRB/7 25 20 3,000


2/BRB/8 20 20 3,000

3/BRB/8 25 20 3,000


2/BRB/9 20 20 3,000

3/BRB/9 25 20 3,000


2/BRB/10 20 20 3,000

3/BRB/10 25 10 1,500




Ref: 1313485

19


23/34

INTERSECTION FOUR WAY & BACK OUTLET

U- TWO WAY & BACK OUTLET

Y-THREE WAY & BACK OUTLET

H FOUR WAY & BACK OUTLET


2/BRB/11 20 10 1,500

3/BRB/11 25 10 1,500


2/BRB/15 20 20 3,000

3/BRB/15 25 20 3,000


2/BRB/16 20 20 3,000

3/BRB/16 25 10 1,500


2/BRB/17 20 10 1,500

3/BRB/17 25 10 1,500




Ref: 1313485

20


24/34

ADAPTABLE BOX

WIRE PULLER

Item Code Size (mm) Standard Packs

BAB 1 100x100x60 150

BAB 2 130x130x74 28

BAB 3 215x215x110 10

Item Code Diameter (mm) Size (meter)

BWP 1 4.5 15

BWP 2 4.5 30

Available in Grey color only

Available in White color only


21


25/34

AMERICAN SYSTEMTECHNICAL INFORMATION

AMERICAN STANDARDS


26/34

TECHNICAL INFORMATION AMERICAN STANDARDS

BC American Standard Conduits:

UPVC Material

Manufacturing Standards

Heavy wall and extra-heavy wall rigid plastic (UPVC) conduit, fittings and accessories designed for

installation underground, in slab, encased or light weight, high-impact strength and low installationcosts. Supplied in standard 10’ lengths, with or without belled ends.

Encased in concrete or direct burial for underground applications, also for exposed or concealed

applications aboveground. Sunlight resistant, rated for use with 90°C conductors, reduced smoke and

HCL emissions, superior weathering characteristics.

Specifications: UL type 40 rated for 90°C cable can be used in above ground or below ground applications

subject to severe physical abuse.

Rigid UPVC Compound which fully meets the material requirements of American specifications for cellas per ASTM D 1784 and ASTM D 4396 as specified in NEMA Standards.

NEMA TC 2 Electrical Plastic Tubing (EPT) and Conduit (EPC-40 and EPC-80)

NEMA TC 6 UPVC Plastic Utilities Duct for underground installation

&

NEMA TC 8 Extra-Strength UPVC Plastic Utilities Duct for underground installation

ASTM F 512 Smooth-wall UPVC Conduit and fittings for underground installation

23


27/34

TECHNICAL INFORMATION AMERICAN STANDARDS

UPVC PROPERTIES

PROPERTY ASTM TEST METHOD UNIT VALUE

General Properties:

Density D-792 g/cm³ 1.44 0.02

Water Absorption D-570/Proc. A % 0.3

Mechanical Properties:

Tensile Strength, Ultimate D-638/Type 1 kg/cm² 421.1

Modulus of Elasticity D-638/Type 1 Mpa 1930

Flexural Strength D-695, D-790/Proc. B Mpa 77

Hardness D-785 Shore D 119

Izod Impact Strength D-256/method A J/M 34.7Thermal Properties:

Heat Deflection Temp. D-648 (1.82 Mpa load) °C/ (°F) > 70(158)

Vicat Softening Temp. D-1525 (rate A) °C/ (°F) > 70(158)

Co-efficient of ThermalExpansion

D-696/3m length mm/m/10°C 1.6

Thermal Conductivity C-177 W/(°Km) 0.14

Flammability Properties:

Flammability D-635 Resistance Self extinguishing

Extent of Burning D-635 mm


28/34

AMERICAN SYSTEMAMERICAN CONDUIT SYSTEM


29/34

AMERICAN SYSTEM AMERICAN CONDUIT SYSTEM

RIGID UPVC CONDUITSNEMA TC 2 “Electrical Polyvinyl Chloride (UPVC) Conduit” Schedule 40

Item CodeTradeSize

(inch)

MetricDesignators

Averageoutside

diameter mm

SCH-40

StandardPacks

BulkPacks(Pcs)

WallThickness(Min.) mm

Nominal Weight

Kg/m

BAC/105 ½ 16 21.34 2.77 0.248 40 3,640

BAC/107 ¾ 21 26.67 2.87 0.329 30 2,160

BAC/110 1 27 33.40 3.38 0.483 20 1,440

BAC/112 1¼ 35 42.16 3.56 0.652 20 900

BAC/115 1½ 41 48.26 3.68 0.779 10 720

BAC/120 2 53 60.32 3.91 1.04 10 450

BAC/130 3 78 88.9 5.49 2.16 - -

BAC/140 4 103 114.3 6.02 3.07 - -

BAC/160 6 155 168.28 7.11 5.41 - -

26


30/34

27


RIGID UPVC CONDUITSBS 3506-1969 Class-B 6.0 bar

Item CodeTradeSize

(inch)

Mean Outside Diameter

Average Value

Max

Individual Value

Min Max Minmm

Max mm

BIP/130 3 88.7 89.1 3.4 2.9 3.4

BIP/140 4 114.1 114.5 4 3.4 4

BIP/150 5 140.0 140.4 4.4 3.8 4.4

BIP/160 6 168.0 168.5 5.2 4.5 5.2

COUPLING

Item Code Size (inch) Standard Packs Bulk Packs (Pcs)

BSC/105 1/2 100 20,000

BSC/107 3/4 100 10,000

BSC/110 1 50 5,000

BSC/112 11/4 25 2,500

BSC/115 11/2 25 2,500

BSC/120 2 20 2,000


31/34


90O ELBOW - PLAIN END

90O ELBOW - BELL ONE END

90O ELBOW - BELL TWO ENDS

Schedule 40

Schedule 40

Schedule 40

28

Item Code Size (in) Standard Packs Bulk Packs (Pcs)

BEPC2 1/2 20 2,000

BEPC3 3/4 10 1,000

BEPC4 1 100 600

BEPC5 11/4 50 300

BEPC6 11/2 50 300

BEPC7 2” 25 150


BEPC2/1S 1/2 20 2,000

BEPC3/1S 3/4 10 1,000

BEPC4/1S 1 100 600

BEPC5/1S 11/4 50 300

BEPC6/1S 11/2 50 300

BEPC7/1S 2” 25 150


BEPC2/2S 1/2 20 2,000

BEPC3/2S 3/4 10 1,000

BEPC4/2S 1 100 600

BEPC5/2S 11/4 50 300

BEPC6/2S 11/2 50 300

BEPC7/2S 2” 25 150


32/34

15 YEAR GUARANTY

BC Conduit shall guaranty and warranty the supplied UPVC conduitsand accessories for a period of 15 years for indoor use only, from thedate of delivery against the products malfunction due to material,

workmanship and manufacturing defects. BC Conduit guaranty and warranty shall not apply if the customeruses or installs the products improperly, when such an improperuse is judged using the national and /or internationally recognizedstandards and codes of the electrical Industry.

The Guaranty shall not extend to items not manufactured by BCConduit, or to any damages or defects resulting from the use ofproducts in a manner other than what these intentionally designedfor, nor the mishandling or misuse during their transport or storage.

5107

29


33/34

AluminumFactory

Pre CastFactory

for Concrete

TrainingInstitute

for Technology

Roundabout

M A K K A H

R O A D

T o M

a k k

a h

To Makkah

T o

J e d d

a h

B a h r a F l y o v e r

PREMCO

N

INDUSTRIAL PARK

K ing A bdul A z iz Medic al Cit y


34/34

Documents

Bc Conduit Catalog