BE Project Report Format - 2010-11

8/7/2019 BE Project Report Format - 2010-11

1/7

Project Title

Bachelor of Engineering

( Electronics Engineering )

Submitted by

Individual name for Individual copy

Mr. / Ms. name1

Mr. / Ms. name2

Mr. / Ms. name3

Under the guidance of

Prof. ____________________________________

Department of Electronics Engineering

Dr. D. Y. Patil Groups

Ramrao Adik Institute of Technology

Nerul, Navi Mumbai 400706

(University of Mumbai)

2010 - 11

Project Title



2/7


Submitted in fulfillment of the requirement of University of Mumbai

For the Degree of



by

Mr. / Ms. name1

Mr. / Ms. name2

Mr. / Ms. name3

Under the guidance of

Prof. ____________________________________

Department of Electronics EngineeringDr. D. Y. Patil Groups

Ramrao Adik Institute of Technology

Nerul, Navi Mumbai 400706

(University of Mumbai)

2010 - 11

RAMRAO ADIK INSTITUTE OF TECHNOLOGYNERUL, NAVI MUMBAI

CERTIFICATE


3/7

This is to certify that

Name of the student

has satisfactorily completed the requirements of thePROJECT entitled

Project Title as prescribed by theUniversity of Mumbai Under the guidance of

Prof. _____________________________

Project Guide

Internal Examiner: External Examiner:

Name : Name :

Signature: Signature:

Designation: Designation:

Project Coordinator Head of the Dept. Principal

Mrs. S. J. Petkar Mr. M. D. Patil Dr. S.R. Devane

Company/organization letterhead

CERTIFICATE


4/7

This is to certify that the report titledPROJECT .title

records the bonafide work carried out by

Mr./Ms. name1,

Mr./Ms. name2

Mr./Ms. name3

the students of Ramrao Adik Institute of Technology, Nerul , Navi-Mumbai,

of Electronics Engg. Department has successfully completed project in our

organization under my guidance and supervision.

Signature of the External GuideName:

Designation:...Date:


5/7

Ramrao Adik Institute of Technology, Navi Mumbai.

INDEXCHAPTER

NO.

SECTION

NO.

TOPIC PAGE

NO.Acknowledgement

AbstractList of figure with page number

iii

ivv

1.1.1

1.21.3

1.4

INTRODUCTIONProblem definition/statement

Literature surveyStudy and analysis

Organization of the report

1.

.

.

2.

2.1

2.22.3

System design consideration

Proposed work

Proposed methodologySystem requirement

.

.

.

.

3. PLANNING AND FORMULATION .

4.

4.1

4.2

4.34.4

DESIGN OF SYSTEM

Hardware design

Software design..

.

.

.

5

6

RESULTS AND CONCLUSION

Future Scope

.

APPENDIX A

BC

D

.

REFERENCES

.


6/7

B.E. VIII Sem (Rev) Electronics Engg.

Project 2010 - 11 Examination

Project Report Specifications

1) Textual contents must be neatly typed in one and half space on A4 size bond paper

on one side with LM= 1.25 , RM=1.25 , BM=1.0 and TM=1.0 .

2) The font details to be selected for various textual contents are as follows :

Chapter heading 20 pts.

Section heading 16 pts.

Sub-section heading 14 pts.

Normal text 12 pts.

Font type Times New Roman.

Font style Regular.

Font spacing Normal.

3) All figures and sketches and diagrams as well as the tables ,if any must appear on

separate pages. All these must be properly numbered chapter wise and the sequence in

which they appear within a chapter . Further, these must be followed by the suitable

captions.

4) All pages are to be numbered in Arabic numerals (1,2) starting from chapter 1 and

ending with the last chapter 6 including all the non-textual pages. For further details referto Enclosures 1 4 .

5) Abstract not exceeding one A4 size page is to be typed in single space.

6) All the reports must be neatly softbound with light Blue cover. Contents on the cover

should be lettered in dark Blue color.

7) One copy is to be submitted by each group

8) Avoid all sorts of colors , decorations and any other face-lifting measures, unlessdemanded by the nature of work carried out by you or unless all the important features are

already embedded in the report.

9) Students in group not appearing for exams must get their copies of reports signed now

only ie before end of Sem VIII & will be required to submit two copes to the college when

they wish to appear for exam & fill up application.

10) All regular students appearing for project I exam should get their own copies also

certified. They are required to submit one copy to the college for exam work.


7/7

Guidelines for the preparation of the Project Report1. Abstract

Size of this should not exceed single A4 page typed in single space. This is expected to

be a document of the entire report. It should introduce to the reader the basic objective of

the work reported and how far this objective has been achieved with a brief, clear andprecise description of the methodology of the said achievement.

2. Chapter 1 : Intoduction

This must begin with the historical survey indicating the chronological developments inthe relevant field . The primary objective of this chapter is to introduce to the reader the

various directive sources , suggestive literature and expert interaction , if any , that led to

the identification and subsequent selection of the task. This should end introducing to the

reader fairly detailed description of the task being undertaken in this project.

contents: 1. Literature survey

2. Study and analysis.

3. Discussions with the experts, guide and peers , if any .4. Organization of the report

3. Chapters 2 : Proposal

This must detail the nature and scope of the proposed work in terms of its set objectives.

The conceptual as well as philosophical foundation of the proposed work that establishesthe feasibility as well as prosperity of the said work is to be presented in logical

sequence

4. Chapter 3 : Planning and formulationThis must include the chronological action plan that was necessary to carry out the

proposed work for the entire duration from July 2009 April 2010. The work status and

duration spent at each stage must be presented in appropriate detail as indicated below:S.No Task Activity Duration

in weeks

Resource

name

Formulation / System organization

This must include the technology action plan that enable you to complete the task. Natureof processes involved and details about the theoretical as well as experimental studiesthat were necessary for your work are to be presented.

5. Chapter 4 : Design of SystemThe scope and involvement of theoretical as well as experimental frame work involved

must be brought out in requisite detail in this chapter should include the block Schematicslike Use-case diagram, Class diagram, activity diagram or Data Flow Diagram if any, for

the implementation of the system necessary.

6. Chapter 5 : ConclusionThis must include status report of completion of your proposed action plan or progress

achieved by you. Any discrepancies need to be reasoned appropriately. Any further

possibility of expanding the scope and objective of the project if any exists may be statedclearly.

7. References: IEEE format references should be strictly followed

Eg: [1] Grady Booch, Object-oriented analysis and Design, Pearson Education Asia,Second Edition, year_____, pages________

[2] Simon Haykin , Blind Equalization, IEEE Trans. on Computer Software,

vol.---, no.------------, April 2005, pages -------

Documents

BE Project Report Format - 2010-11