Because nothing ismore precious than your lifeFIRE RATED GLASS & ACCESSORIES

FIRE-SAFETYSOLUTIONS

COVER PAGE: PYRAN S Glass at European Inv Bank, Luxembourg

Developer: European Inv Bank | Architect: Ingenhoven Architekten, Germany

Photo Credit: H. G. Esch, Hennef

THIS PAGE: PYRAN S Glass at Coeur Defense, Paris

Owner: Lone Star Real Estate Fund III | Architect: Jean-Paul Viguier, France

INSIDE

INTRODUCTION & TYPESINTRODUCTION

FIRE RATED GLASS TYPES

FIRE RESISTANT GLAZING IN BUILDINGS

04

05

06

®SCHOTT PYRAN S

®WHY SCHOTT PYRAN S

TECHNICAL SPECIFICATIONS

APPLICATIONS®PYRAN S WITH SCREEN PRINTING

09

10

10

11

®SCHOTT PYRANOVA

INTRODUCTION & FEATURES

TECHNICAL SPECIFICATIONS ®WHY SCHOTT PYRANOVA

12

14

15

®PYRAN Platinum

®WHY PYRAN Platinum

TECHNICAL SPECIFICATIONS

APPLICATIONS

16

18

19

FIRE RATED ACCESSORIES

FIRE PROTECTION SYSTEMS FOR HOUSING INDUSTRY

FIRE PROTECTION COMPONENTS

FIRE PROTECTION ACCESSORIES

21

22

23

INTRODUCTION TO FIRE PROTECTIONFire-prevention systems can broadly be classified into two catego-

ries: Active Fire Protection and Passive Fire Protection. Any well-

equipped fire-fighting network should be a synthesis of these two

systems, both complimenting each other to prevent loss of life and

property.

Active Fire Protection (AFP) systems require a certain motion and

response to combat fire and can be either automatic (water

sprinklers, fire alarms, hypoxic air suppression systems, etc.) or

manual (emergency evacuation, fire-extinguishers, fire-fighters,

water hoses, etc.). These systems require periodic maintenance and

audits to verify their workability and response to fire. Juxtaposed

with AFP systems are Passive Fire Protection (PFP) systems that

creates compartmentalisation (or compartmentation) of the building

floor plate through fire-resistive walls and floors. The purpose of

these systems is to prevent the spread of fire by creating barriers to

its passage for a specified duration, enabling occupants to assemble

in a relatively safe compartment and eventually be pulled out to

safety.

PASSIVE FIRE PROTECTION IS DETERMINED BY REGULATIONS

04

Country

Institute

Test

GERMANY EUROPE UK USA INDIA

DIN 4102 DIN EN 1363 BS 476 UL 9 EN 1363/

UL 9/ BS 476

DIBt efectis

TNO

Warrington CBRI

Impact Test

Fire Test

Hose Stream

Test

Hose Stream

Test

Impact & Fire

Test

• Escape Routes

• Compartmentation

• Behavior of Construction

Materials in Case of Fire

• Sprinkler Systems

• Extinguishers

• Flues

• Hypoxic Air Supression

• Ordinances of Workplaces

• Instructions to Occupants

• Fire Safety Regulations

• Fire Safety Drills and Audits

• Fire Department

• Water Supply

• Emergency Calls

• Fire Alarms

Fire Protection Systems

PassiveFire Protection

ActiveFire Protection

Constructional Technical Organisational Public

FIRE RATED GLASS TYPESConventional soda-lime silicate glasses (with a coefficient of

-6expansion of 9 x 10 ) do not offer much resistance when exposed to

fire and shatter within minutes. Heat-treated glasses would last

slightly longer but not significantly enough. Special glass types such

as wired, borosilicate and intumescent inter-layered glasses are

available that offer varying levels of protection when amalgamated

with fire-resistant doors and framing systems. To understand the

performance levels, the European standard (EN 13501-2) defines

three classifications: E, EW and EI. The American UL standard

requires all five resistant materials to withstand the hose-stream test.

The glass prevents flames,

smoke and hot gases from

passing through. The fire

remains contained.

The glass restricts the

amount of heat passing

through it to the side which is

to be protected (radiation 2does not exceed 15 kW/m ).

The average temperature of the

glass on the protected side

remains below 140K which

eliminates the risk of self-

combustion of exposed materials

either due to radiation or convec-

tion of exposed materials and

means that buildings can be

evacuated safely and calmly.

Underwriters Laboratory (UL)

standard has a further requirement

that any fire-resistant glazing

should have the ability to with-

stand the hose-stream test, which

tests the assemblies' ability to

remain intact after a jet of water is

blasted on its surface when

exposure to fire. The test assesses

hose stream impact, erosion and

cooling effects in a consistent

manner. It is not intended to

replicate conditions that firefighters

might create when attacking a fire.

®FG GLASS & SCHOTT FG Glass exclusively presents the entire range of SCHOTT's fire-

®rated and security glass solutions. SCHOTT is an international

technology group based in Germany with more than 125 years

experience in the areas of specialty glasses and materials and ®advanced technologies. SCHOTT is an innovative enabler for many

industries, including the home appliance, pharmaceutical, electron-

ics, optics, automotive and aviation industries. With FG Glass, you

now get their fire-rated solutions processed locally enabling very

quick throughput times and excellent serviceability.

05

INTEGRITY

(Classification E)

LIMITING RADIATION

(Classification EW)

Thermal Insulation

(Classification EI)

UL RATED(With Stands Hose Stream Test)

FIRE RESISTANT GLAZING IN BUILDINGS

Fire Doors with

Vision PanelsFire-rated doors are now a critical safety

feature in creating fire-barriers for

staircases, building entrances and exits

and internal applications such as

communal areas, foyers and corridors.

Facades and WindowsIncreasing focus on fire-safe facades is

mandating use of fire-rated glazing in

commercial and residential applications.

These facades stop the fire from

transmitting from inside-out or outside-

in as per the safety and regulatory

requirement.

FloorsFire-safe floors utilise glass and other

glazing materials to stop the flow of

fire between floors. As per many city

municipal codes, fires need to be

contained within the floor it

originated from and fire-rated floors

serve as an important barrier.

SkylightsFire-rated glazing can be used in

skylights to prevent the fire from

spreading through the building roof.

Specially important if there are

adjacent structures that need to be

protected against fire from inside the

building.

06

Fully Glazed Fire

DoorsA glass-glazed option to regular

fire-doors, these provide complete

transparency and better aesthetics

and are becoming increasingly

popular as use in fire-door barriers.

07

Lift Doors and EnclosuresProtection of lifts and elevators against fire is of paramount

importance and fire-rated glass doors are becoming preferred

to service this requirement. Apart from its visual appeal, these

doors help in identifying potential survivors on either side as the

glass remains transparent throughout the fire and can greatly

help rescue efforts.

Stairs EnclosureStaircases are the fastest and safest exit

routes in most constructions and it is

important to protect their access points

with fire-rated doors with inbuilt vision

panels. These vision panels greatly

assist in understanding the extent of

fire and helps facilitate coordinated

getaways from fire-affected areas..

Data Storage

and Server Room

EnclosuresPreservation of electronic data against risk

of fire is critical and almost all server and

data room enclosures are now designed

with fire-rated glasses. With its dual

benefits of integrity and transparent views,

glass serves as a mandatory, yet desirable

solution for these cabinet constructions.

PartitionsCompartmentalisation of floor plates to create fire-safe refuge spaces

are now a mandatory architectural feature in all commercial,

hospitality and residential developments and are dictated as per the

local civic regulations. Fire-rated glass serves as an exceptional

material of choice for creating these compartments due to its

transparence, longevity and almost zero-maintenance.

E 30 to 120®SCHOTT PYRAN S

PYRAN S Butt-Joint Glazing with Two-Colour Pattern at Mercedes-Benz Museum, Germany

Developer: Daimler AG | Architect: HG Merz, Germany

09

®PYRAN S is a pre-stressed, monolithic, borosilicate single-pane ®safety glass in accordance with EN 13024-1. PYRAN S is far superior

to traditional fire resistant glasses. The secret lies in the interaction

between the material and the production process. Manufactured in

a micro-float facility, which is the only are in the world, the fire

resistant properties of the special float glass surpass those of soda

lime glass by far. The unique combination of borosilicate glass and

the float process result in the special glass type As a component in

fire-resistant glazing that meets the requirements of resistance

classes E 30, E 60, E 90 and E 120, it has proven its outstanding

optical and mechanical characteristics over the years in a wide

variety of buildings. ®PYRAN S as a single pane safety glass meets all requirements for

improved safety. In the event of breakage it displays a typical

toughened glass breakage i.e. into small fragments and meets the

requirements of statutory accident insurance as well as the Health

and Safety at Work Act, thus providing an added plus in terms of

safety and reliability.

The versatile champion in fire protection

®WHY SCHOTT PYRAN S

FULLY TOUGHENED FOR SAFETY AND

FLEXIBILITY®A borosilicate glass, PYRAN S is a fully toughened,

monolithic and non-wired fire-resistant glass as per

DIN EN 13024-1. Compliant to Class A category of

Impact Resistance as per BS 6206: 1981.

CLARITY THAT TRANSCENDS BOUNDARIES®PYRAN S is an super-clear transparent glass with no

green tint or iron impurities. With a light transmis

sion of 92%, it provides unmatched aesthetics,

clearer than even ultra-clear glass!

REMAINS TRANSPARENT THROUGHOUT

THE FIRE

Does not lose transparency under fire. This is

extremely beneficial in critical fire-safety applications

like doors, windows and partitions to facilitate human

rescue from fire to non-fire side and also helps fire-

rescue authorities judge the intensity of fire and plan

rescue operations.

MADE IN GERMANY. CUSTOMIZED IN INDIA.

PYRAN® S is manufactured in Germany and

shipped in customizable form to India for local

processing. Giving you the best of both worlds:

unbeatable quality with unbelievable service levels.

NO PROBABILITY OF SPONTANEOUS

BREAKAGE

The high-grade borosilicate composition does not

contain nickel-sulphide inclusions and hence

eliminates the chances of spontaneous breakage.

Due to this unique characteristic, heat-soaking is not

needed.

SAME WEEK DELIVERY TIME

Our sophisticated inventory-management system

ensures we never stock out of the base glass and can

effect extremely quick delivery times. So now you

can maintain just-in-time inventory levels and order

glass precisely when you need it.

RESISTANCE TO CHEMICALS

Since the glass is without any coating or interlayers,

the resistance to chemicals like acids, alkalis and

chlorine is extremely high. This is extremely critical in

places with high chemical content in air like oil

refineries, chemical factories and oil rigs.

REUSABILITY

Under very minor fires that are extinguished within a ®few minutes, PYRAN S can potentially be reused;

however the glazing components might require

change.

120 MINUTE COMPLETE FIRE-PROTECTION

Tested for 120 minutes integrity, stability and

protection against flames, hot gases and smoke as

per BS476 Part 22. Provides radiation control 2(15kW/m ) for 68 minutes as per EN 1634-1.

UNLIMITED LIFE AND FIRE-PERFORMANCE

WARRANTY®With no interlayers or coating, PYRAN S gets its

fire-resistance from the unique borosilicate

composition and lasts a lifetime. It never discolours

or loses appearance over time and is unaffected by

high ambient temperatures or UV rays.

®PYRAN S TECHNICAL SPECIFICATIONS

Thickness

Fire Resistance Class

Weight

Light Transmission

U-Value

Sound Insulation Value

Impact Rating (EN 12600)

6 mm

E 120

213.7 kg/m

92%

25.8 W/m K

31 dB

1B1

8 mm

E 120

218.2 kg/m

92%

25.8 W/m

32 dB

1B1

10 mm

E 120

222.8 kg/m

91%

25.8 W/m

33 dB

1B1

12 mm

E 120

227.4 kg/m

91%

25.8 W/m

34 dB

1B1

®PYRAN S in Curved Glazing®Used in fire resistant glazing that meets the requirements of fire resistance class E 30 to E120 in a steel frame, curved PYRAN S has the

outstanding transparency of white glass combined with a visually attractive design.

®While flat glass panes arranged in a facetted formation create an interrupted appearance, curved PYRAN S components facilitate an

uninterrupted clear and complete visual look.

®PYRAN S in Insulated Glazing

® PYRAN S can be combined with an outer clear, tinted or coated glass to achieve the desired aesthetics in building exteriors combined with ® solar control properties. Extremely bespoke, PYRAN S allows architects the freedom to use fire-rated glazing for facades, curtain walls and

® windows without compromising on the building appearance and heat-gain. Insulated PYRAN S is classified as E90 in tested steel or aluminum

frames.

®PYRAN S in Laminated Glazing

® PYRAN S can be laminated with clear, tinted or coated glass for enhanced safety, acoustic performance, aesthetic conformance and solar ® control as per requirements. Laminated PYRAN S units can achieve E60 rating in tested steel or aluminum frames.

Areas of Application

• Facades

• Partition walls

• Skylights and roof-lights

• Doors

• Roofs

• Smoke screens

• Lift door glazing

• Lift shaft glazing

10

As bespoke as your ideas®PYRAN S unites fire protection and decor in a unique way.

The transparency and lightness of glass in buildings and rooms take

on a whole new character through bright colors and attractive

decors. The variety of colors and motifs available is virtually

unlimited. Now planners and architects responsible for fire

protection can also be involved in the overall design creativity of the

planning process.

Design with sandblasting

Sandblasting can be used to purposely modify the surface structure ®of PYRAN S panes. A visually inconspicuous design is the result, the

aesthetics of which are fully revealed with illumination. This process

does not diminish the durability or the performance of these

functional glasses.

When added to the glass surface, extremely thin and nearly invisible

functional layers protect it from corrosion, dirt and other contamina-

tion

Design with screen printing®Entire surfaces of PYRAN S can be printed without restriction on the

degree of printing, so that characteristics such as glass transparency,

energy flow and/or glare protection can be individually managed. ® Even the fire performance of SCHOTT special glass types is not

reduced and two hour fire rated partitions are still possible. With rich

color nuances and an abundance of patterns, screen printing opens

up a wealth of new design possibilities for fire resistant glazing.

Depending on the colors chosen, either screen printing or a roller

process is used to apply them to the glass surface. In the subsequent

thermal tempering process, the colors are burned into the glass

surface. The resulting glasses are as colorfast, abrasion-resistant,

scratch-resistant and weatherproof as unprocessed glass surfaces,

and require the same low maintenance.

®PYRAN S – butt joint glazing with two-color

screen-printed pattern

®Screen printing with PYRAN S – new ideas which go beyond

simple aesthetic considerations

® • Possibility to print entire surfaces of PYRAN S

• Possibility to regulate transparency and energy flow through design

measures such as progressive frit patterns

• Screening and anti-glare protection

• Many different design options with a wide spectrum of brilliant

colours and patterns

®Here is a selection of standard patterns for PYRAN S. All colors and

designs are available as grid or graduated grid screen printing.

Other colors and patterns are available on request.

®The color of printed PYRAN S panes can appear different depend-

ing on the glass thickness and the viewing side. The maximum

pattern dimensions also varies depending on the pattern and pane

thickness. It is always advisable to discuss application conditions

before choosing the final pattern. Just ask one of our experts for

help.

11

EI 30 to 120®SCHOTT PYRANOVA

BMW World, Munich

Developer: BMW AG | Architect: Coop Himmelb(l)au, Austria

Stay cool, calm and collected ®PYRANOVA special glass is a clear, laminated composite glass that

is made up of several thin panes of float glass. A transparent, fire

resistant layer that foams up in the event of a fire has been placed

between the panes.

®When used in fire resistant glazing, PYRANOVA special glass

prevents the passage of fire, smoke and heat radiation. Due to its

®structure, the standard construction of PYRANOVA special glass

provides protection from either side.

®PYRANOVA special glass when used as a component in fire

resistant glazing meets the requirements of fire resistance classes EI

15 to EI 120, or EW 30 to EW 60. For fire barriers, it meets the

requirements of T 30 to T 90.

®Fire resistant glazing with PYRANOVA special glass acts as a barrier

against the spread of fire, smoke and heat radiation in the event of

fire. The float glass pane facing the fire shatters. The enclosed,

transparent fire resistant layers then foam up and form an opaque

heat shield, which prevents the passage of heat radiation in case of

fire. The requirements of an EI glazing are met, if the temperature

rise on the non-fire side does not exceed 140 °C (average) or 180 °C

in any one position. Depending on the thickness of the composite,

the fire resistance time can be influenced accordingly.

Function

13

®PYRANOVA is suitable for all areas of application requiring thermal insulation in case of fire. In co-operation with ® ®system partners SCHOTT develops internationally approved constructions with PYRANOVA special glass, which are

ideally suited for application in:

• Doors • Facades • Partition walls • Escape routes and stairways.

Areas of application

® ®ISO PYRANOVA incorporates PYRANOVA as part of a double glazed unit that can be used wherever further requirements are needed in ®addition to protection from fire. In combination with other performance glasses, ISO PYRANOVA fulfils functional, aesthetic and energy

efficiency requirements.

• Sun protection - Solar control coatings (anti-glare)

• Heat insulation - Low-e coatings

• Sound insulation

®ISO PYRANOVA

®PYRANOVA FOR INTERIOR APPLICATIONS ®PYRANOVA special glass for interior applications is a clear composite glass with fire resistant properties in accordance with DIN EN ISO

12543. Depending on the design, it is manufactured from at least two float glass panes with transparent, fire resistant interlayers, which

intumesce in case of fire.

14

®PYRANOVA FOR EXTERIOR APPLICATIONS ®PYRANOVA special glass for exterior applications is a clear composite glass with fire resistant properties in accordance with DIN EN ISO

12543. In addition to the float glass panes with transparent fire resistant interlayers, which foam up in case of fire, the special glass is

manufactured with an external laminated pane for exterior applications.

Thickness

Fire Resistance Class

Weight

Light Transmission

U-Value

Sound Insulation Value

Impact Rating

(according to EN 12600)

10 mm

El 15/EW 30

224 kg/m

87%

25.4 W/m K

36 dB

14 mm

El 20/EW 30

226 kg/m

86%

25.2 W/m K

38 dB

19 mm

El 30

44 kg/m²

83%

25.0 W/m K

38 dB

1B1

21 mm 27 mm 40 mm 54 mm

El 45/EW 60 El 60 El 90 E 120

244 kg/m 261 kg/m 293 kg/m 2116 kg/m

85% 86% 83% 74%

25.0 W/m K 24.7 W/m K 24.1 W/m K 22.5 W/m K

38 dB 41 dB 44 dB 44 dB

1B1 1B1 1B1 1B1

®PYRANOVA | External use

1B1-

Thickness

Fire Resistance Class

Weight

Light Transmission

U-Value

Sound Insulation Value

Impact Rating

(according to EN 12600)

7 mm

EW 30

217 kg/m

89%

25.6 W/m K

33 dB

11 mm

El 15/EW 30

226 kg/m

87%

25.4 W/m K

36 dB

15 mm

El 30

35 kg/m²

86%

25.1 W/m K

38 dB

1B1

19 mm 23 mm 37 mm 52 mm

El 45 El 60 El 90 E 120

244 kg/m 255 kg/m 286 kg/m 2108 kg/m

85% 87% 84% 74%

25.0 W/m K 24.8 W/m K 24.2 W/m K 2.5 W/m 2K

38B 41 dB 44 dB 44 dB

1B1 1B1 1B1 1B1

®PYRANOVA | Internal use

--

15

®WHY SCHOTT PYRANOVA

120 MINUTE COMPREHENSIVE FIRE-

PROTECTION

Tested for up to 120 minutes integrity, radiation

control and insulation as per BS476 Part 22. Ensuring

the highest levels of fire-protection for human and

property protection.

CAN BE COMBINED WITH HIGH-

PERFORMANCE GLASSES®PYRANOVA can be combined with high-

performance solar control glasses (including low-E

glasses) to satisfy thermal glazing requirements and

reduce cooling costs.

ENDURING TRANSPARENCY AND STABILITY®

PYRANOVA glass provides a very high light

transmission between 74% and 87% with complete

transparency and is an extremely stable and durable o oin the temperature range of - 20 C to 50 C.

NOT JUST FIRE, CUTS OFF SOUND TOO

Owing to its sophisticated glass and interlayer ®assemblies, PYRANOVA units provide excellent

damping effects against sound waves and provide

up to 44 dB reduction in sound transmission.

SATISFIES THE HIGHEST REQUIREMENTS OF

IMPACT SAFETY®PYRANOVA units have a 1B1 impact rating accord-

ing to EN 12600. So you have the safest glazing

product that perfectly blends aesthetics and

functionality.

SUPER QUICK DELIVERY TIME

Our sophisticated inventory-management system

ensures we never stock out of the base glass and can

effect extremely quick delivery times. So now you

can maintain just-in-time inventory levels and order

glass precisely when you need it.

PROTECTION AGAINST FALLING ® PYRANOVA conforms to the extremely demanding

protection against falling requirements according to

the German TRAV Categories A & C.

MADE IN GERMANY. CUSTOMIZED IN INDIA.®PYRANOVA S is manufactured in Germany and

shipped in customizable form to India for local

processing. Giving you the best of both worlds:

unbeatable quality with unbelievable service levels.

PYRANOVA Glazing System at ABZ Salzkammergut, Austria

Developer: ABZ Bank | Architect: Josef Fink ZT GmbH, Germany

E 90 to 180®PYRAN Platinum

Withstands Hose Stream Test

PYRAN Platinum Glass Installed in a Fully-Glazed UL-Rated Fire-Door

17

Undisputedly the world's best glass ceramic

®PYRAN Platinum is the world’s first and only floated glass ceramic

for fire resistant glazing.

®As a UL-certified glass ceramic PYRAN Platinum meets the highest

US standards for fire-resistance. This requires that the glass

withstands thermal shock immediately following exposure to

extremely high temperature. In the test, the hot glass is blasted with

cold water at a very high pressure from a fire hose. Only glass

ceramic is able to withstand such extremes in temperature differ-®ence. PYRAN Platinum offers fire protection up to 90 min in

windows and 180 min in doors.

®PYRAN Platinum is clear and colorless, closely resembling normal

architectural window glass, without the distracting orange/amber

tint associated with competitive glass-ceramics. The neutral color ®allows PYRAN Platinum to blend in with the surrounding architec-

ture of the building.

This unique attribute is a result of carefully designed decolorization ®agents added to the glass melt. The composition of PYRAN

Platinum is stable and is not sensitive to exposure to UV light rays or ®heat. The glass ceramic is also available as filmed (PYRAN Platinum

®F) and laminated (PYRAN Platinum L) to meet impact require-

ments.

UP TO 180 MINUTE FIRE-PROTECTION

Tested for 180 minutes integrity, stability and

protection against flames, hot gases and smoke as

per BS476 Part 22.

MADE IN GERMANY. CUSTOMIZED IN INDIA.®PYRAN Platinum glass ceramic is manufactured in

Germany and shipped in customizable form to India

for local processing. Giving you the best of both

worlds: unbeatable quality with unbelievable service

levels.

THE WORLD'S ONLY C2C CERTIFIED FR-GLASS

CERAMIC®PYRAN Platinum glass ceramic achieves C2C

Certification at the Silver level, which means all

chemicals are identified down to 100 ppm level (0.01%)

with no toxic heavy metals or related chemicals. What's

more, you can gain valuable LEED points if your project

qualifies for Green Building Certification.

SAME WEEK DELIVERY TIME

Our sophisticated inventory-management system

ensures we never stock out of the base glass and can

effect extremely quick delivery times. So now you

can maintain just-in-time inventory levels and order

glass precisely when you need it.

AS CLEAR AS CONVENTIONAL GLASS®PYRAN Platinum glass ceramic is as clear as regular

soda-lime silicate glass, without the haze or amber

tint associated with all other glass ceramics available

in the market.

SUPER SMOOTH SURFACE

Due to its unique float manufacturing process, ®PYRAN Platinum glass ceramic is able to provide a

high optical quality with outstanding flatness and

has a flawlessly polished, distortion-free surface

finish.

CAN BE LAMINATED FOR IMPACT RESISTANCE®PYRAN Platinum glass ceramic can be filmed

® ®(PYRAN Platinum F) or laminated (PYRAN

Platinum L) for enhanced safety and impact

resistance.

ABILITY TO WITHSTAND HOSE STREAM TEST®PYRAN Platinum fire-rated glass ceramic passes the

hose stream test as per UL classification thanks to its

superior strength and near-zero thermal expansion.

®WHY SCHOTT PYRAN PLATINUM

UNLIMITED LIFE AND FIRE-PERFORMANCE

WARRANTY®With no inter-layers or coating, PYRAN Platinum

glass ceramic lasts a lifetime. It never discolours or

loses appearance over time and is unaffected by high

ambient temperatures or UV rays.

REMAINS TRANSPARENT THROUGHOUT THE FIRE

Does not lose transparency under fire. This is extremely

beneficial in critical fire-safety applications like doors,

windows and partitions to facilitate human rescue from

fire to non-fire side and also helps fire-rescue authorities

judge the intensity of fire and plan rescue operations

accordingly.

18

®PYRAN

Platinum

®PYRAN

Platinum F

(FILMED)

®PYRAN

Platinum L

(LAMINATED)

RATING

(MINS)

THICKNESS LOCATION MAX. EXPOSED

GLAZING AREA

MAX. EXPOSED

GLAZING WIDTH

MAX. EXPOSED

GLAZING HEIGHT

MIN. GLAZING

CHANNEL DEPTH

IMPACT

SAFETY

RATED*

UL-CERTIFIED ALL THROUGHOUT

Fire Test The Fire Endurance Test for fire-protection rated glazing subjects a

full-size window or door assembly to a controlled time-temperature

profile in a furnace. The test duration is 20 minutes up to three

hours, depending on the desired rating, with temperatures reaching

nearly 2000° F in three hours. The window assembly including

frame, glazing and components must not allow flaming on the non-

fire side, and the glazing must survive the test without breaking or

cracking. This test is performed in accordance with test standards UL ®9, UL 10B, NPFA 252 and NFPA 257. PYRAN Platinum is tested and

certified by Underwriters Laboratories for fire protection up to 90

minutes in windows and 180 minutes in doors.

Sound Transmission The acoustical performance of glazing is described by the Sound

®Transmission Class (STC) measured by ASTM E90. PYRAN Platinum

L effectively reduces unwanted sound transmission and has an STC

rating of 36, making it suitable for installation in LEED-rated school

buildings.

Impact Test In installations where accidental human impact could occur, fire-

rated glazings must also withstand Impact Tests. Impact is tested

according to CPSC 16 CFR 1201 using a 100 lb. weight swung from a

pendulum at 48-inch drop height. The glazing must remain intact ®with no significant openings. PYRAN Platinum F with a surface

applied safety film and PYRAN® Platinum L with an impact-resistant

interlayer meet CPSC Category II impact tests.

Hose Stream Test Immediately following the Fire Endurance Test, the fire-exposed side

of the test assembly is subjected to impact from water blast in a

prescribed pattern for duration appropriate to the specimen size. ®The glazing must remain intact in the frame. PYRAN Platinum fire-

rated glass-ceramic passes the hose stream test thanks to its

superior strength and near zero thermal expansion.

Clean composition plus innovative manufacturing

equals excellent glass properties®In designing the chemical composition for PYRAN Platinum,

®technical experts at SCHOTT gave special consideration for human

health and environmental safety. The glass is manufactured without

hazardous heavy metals, antimony and arsenic normally used as ®refining agents. Instead, SCHOTT uses unique manufacturing steps

to produce high quality glass without hazardous metals. Therefore ®SCHOTT does not contribute to the mining and transport of

antimony and arsenic, and protects employees from handling them.

®PYRAN Platinum is clear and colourless, closely resembling normal

architectural window glass, without the distracting orange/amber

tint associated with competitive glass-ceramics. The neutral colour ®allows PYRAN Platinum to blend in with the surrounding architec-

ture of the building. This unique attribute is a result of carefully

designed de-colorisation agents added to the glass melt. The ®composition of PYRAN Platinum is stable and is not sensitive to

exposure to UV light rays or heat.

Up to 90 5mm Other than Doors 22.20 m 1930 mm 1930 mm 21 mm No

Up to 90

Up to 180

5mm

5mm

Doors (Non-Temp Rise)

Doors (Non-Temp Rise

and Temp Rise)

21.77 m

20.06 m

915 mm

305 mm

1930 mm

838 mm

16 mm

13 mm

Yes

Yes

Up to 90 5mm Other than Doors 22.20 m 1930 mm 1930 mm 21 mm Yes

Up to 90

Up to 180

9mm

9mm

Doors (Non-Temp Rise)

Doors (Non-Temp Rise

and Temp Rise)

22.20 m

22.20 m

915 mm

305 mm

1905 mm

838 mm

16 mm

13 mm

Yes

Yes

Up to 90 9mm Other than Doors 22.20 m 1905 mm 1905 mm 16 mm Yes

®PYRAN Platinum TECHNICAL SPECIFICATIONS

*according to ANSI Z 97.1 and CPSC 16 CFR 1201 (Cat. I and II)

PYRAN® Platinum products are classified and labeled by Underwriters Laboratories, Inc. for the United States and Canada with File No. R22036. All fire tests performed in

accordance with UL9, UL10B, UL10C, UBC7-2 (1997), UBC7-4 (1997), NFPA252, NFPA257, NFPA80, ASTME2010-01, ASTME2074-00, ULCCAN4-S104 and ULCCAN4-S106.

19

PYRAN Platinum Glass Installed on all Fire-Doors at Mumbai International Airport

Developer: GVK | Architect: Skidmore, Merrill and Owings, New York

FIRE DOOR LITES

A Fire Door is the door component of a fire door assembly, that

together with the frame, hardware and other accessories provide

a specific degree of fire protection to the opening. Fire Doors are

tested according to NFPA 252 or UL 10B or UL 10C and installed

according to NFPA 80.

®PYRAN Platinum fire-rated glazing installed as vision panels in

Fire Doors provides a clear view for occupants exiting the building

in an emergency.

For Fire Door Lites installed in areas subject to human impact, ® ®PYRAN Platinum F and PYRAN Platinum L meet CPSC 16 CFR

®1201 impact requirements. PYRAN Platinum in Fire Door Lites

passes the required hose stream test and is fire-rated up to 180

minutes. It is permanently labeled D-H-90 or D-H-180.

FIRE WINDOW GLAZING

Fire Windows are constructed and glazed to give protection

against the passage of fire. Fire Windows are tested according to

NFPA 257 or UL 9 and installed according to NFPA 80.

®PYRAN Platinum fire-rated glazing installed in Fire Windows

remains clear during a fire and provides a clear view for

occupants exiting the building in an emergency.

For Fire Windows installed in areas subject to human impact, ®PYRAN Platinum F and PYRAN® Platinum L meet CPSC 16 CFR

1201 impact requirements.

®PYRAN Platinum in Fire Windows passes the required hose

stream test and is fire-rated up to 90 minutes. It is permanently

labeled OH-90.

TRANSOMS, SIDELITES AND BORROWED LITES

Transoms and Sidelites are smaller glazed windows that may

surround the Fire Door. Borrowed Lites are installed in interior

walls to allow light from an adjacent room. Transoms, Sidelites

and Borrowed Lites in Fire Rated walls are constructed and glazed

to give protection against the passage of fire. These three special

windows are tested as Fire Windows according to NFPA 257 or

UL 9 and installed according to NFPA 80.

®PYRAN Platinum fire-rated glazing installed in Fire Windows

remains clear during a fire and provides a clear view for

occupants exiting the building in an emergency.

For Fire Windows installed in areas subject to human impact, ®PYRAN Platinum F and PYRAN® Platinum L meet CPSC 16 CFR

1201 impact requirements.

®PYRAN Platinum in Fire Windows, including Transoms, Sidelites

and Borrowed Lites passes the required hose stream test and is

fire-rated up to 90 minutes. It is permanently labeled OH-90.

Areas of application

FIRE RATEDACCESSORIESComponents, Accessories & Systemsfor Housing Industry

• Excellent resistance

to ageing and

weathering

• Colours: white, black,

grey and transparent

• Special colours

on request

FIRE PROTECTION COMPONENTS

PRODUCT NAME

OFFICIAL

VERIFICATION

BUILDING MATERIAL

CLASSIFICATION

MATERIAL STRUCTURE

TEMPERATURE

CLASSIFICATION

3DENSITY(kg/m )

EXPANSION ('C)

MAX CHAR HEIGHT

SPECIAL FEATURES

BLOCKS FOR FIRE

PROTECTION GLAZING

INSULATION MATERIALS

FOR HIGH TEMPERATURE

APPLICATION

PASTY BUILDING

MATERIALS

FLAMMI 12 FLAMMI 22 ®KERAFIX 2000 ®KERAFIX FLEXIT®KERAFIX

Firestopping Silicone

®KERAFIXFirestop Putty

- - P-3074/3439-

MPA BS Z-19,11-1759

E as to DIN

EN 13501-1

Solid material

(reinforced)

1.100'C

960 approx

-

-

Ceramic

fiber-free

A1

(non-combustible)

as to DIN 4102-1

Solid material

1.100'C

870 approx

-

-

Made of

non-combustible

mineral fiber-free

material

B2 (normally flammable)

as to DIN 4102-1 or

E as to DIN EN 13501-1

Light, flexible and

compressible rolls

1.100'C

250 +/-50

-

-

• Kerafix 2000 classic

in black and white

• Kerafix premium with

self-adhesive tape

B2 (normally flammable)

as to DIN 4102-1 or

E as to DIN EN 13501-1

B1 (hardly inflammable)

as to DIN 4102-1

B2 (normally flammable)

as to DIN 4102-1 or

E as to DIN EN 13501-1

- - -

600 approx 1-3 1-4

340 approx -from 140

approx

Free expansion

3 times approximated

Measured with load

2 times approximated

-

Free expansion

20 times approximated

Measured with load

16 times approximated

• Intumenscent

material

• Slight density

after expansion

• Water based

• Intumenscent

sealant

Light, flexible and

compressible rolls

Pasty, elastic

and stable

Pasty

P-HFM 00 4 147

164.112/EC0736/118.292Z-19,11-1746

Fire-rated glass alone is not effective enough against fire and

heat. Therefore professionals are required to find the best

solution with three core building elements - fire protection

glass, fire protective frames and fire protection accessories. FG

Glass exclusively presents the world-famous Gluske and Rolf-

Kuhn range of fire-rated accessories, components and housing

industry products from Germany to complement our glass and

complete the system requirements.

The fire protection accessories consist of glazing blocks, sealant

strips, silicones and intumescent materials which are used in

frame construction. These elements are suitable for almost

every kind of common or more complex glass constructions.

Glass

Firestopping silicone e. g. Kerafix®

Firestopping Silicone

Gasket seal

e. g. Kerafix® Everseal

Glazing tape

e. g. Kerafix® 2000

Fire protection glazing block

e. g. Flammi 12

Intumescent material

e. g. Kerafix® Flexpan 200

Cooling insulator

e. g. ROKU' V2 Gypsum Board

21

22

FIRE PROTECTION ACCESSORIES

OFFICIAL

VERIFICATION

BUILDING MATERIAL

CLASSIFICATION

MATERIAL STRUCTURE

GROSS3DENSITY(kg/m )

START EXPANSION

TEMPERATURE ('C)

EXPANSION RATE

(X-TIMES)

EFFECT DIRECTION

INFLATABLE BODY

2PRESSURE (N/mm )

THERMAL

CONDUCTIVITY

(W/mk)

Z-19.11-1369 ETA-

12/0152 Z 13064

B2 as to DIN 4102-1

E as to DIN EN 13501-1

Solid flexible

roll material

980 up to 1200

From approx. 190

14 up to 28-times

(450 °C; 30 Min;

without load)

Three dimensional

Soft cohesive char

Minimum 0.4

0.995

Z-19.11-1369

ETA-12/0152

B2 as to DIN

4102-1 E as to

DIN EN 13501-1

Solid flexible

roll material

700 up to 900

From approx. 190

9 up to 20-times

(450 °C; 30 Min;

without load)

Soft cohesive char

Minimum 0.3

0.3

-

E as to DIN EN

13501-1

(in preparation)

Solid flexible

roll material

Approx. 1100 to 1300

From approx. 180

33-times (450 °C;

30 Min; without load)

Three dimensional

Soft cohesive char

Minimum 1.0

1.0

-

E as to DIN EN

13501-1

(in preparation)

Solid flexible

roll material

Approx. 1100 to 1300

From approx. 200

33-times (450 °C;

30 Min; without load)

Three dimensional

Soft cohesive char

Minimum 0.5

0.5

Flat

PRODUCT NAME

Kerafix®

Flexpan 200(ROKU® Strip L 110)

Kerafix®

Flexpan 200 L(ROKU® Strip L 80)

Kerafix®

Flexpan 200 NG-A

Kerafix®

Flexpan 200 NG-G

®ROKU Glue

T-NV, T-MV,

T-HV

®ROKU PUR

Glue 1-K-1013

P-3104/2193-

MPA BS

A1 as to DIN

4102-1

Low-viscosity/

medium-viscosity/

high-viscosity glue

Low-viscosity

glue

1550 to 16301120

(±10 %)

From approx. 160

- -

Higher requirements on different fire protection glazings have mandated a more

frequent implementation of intumescent materials in glazing constructions and

constructions today benefit from a reduced passage of heat and higher

mechanical stability.

Due to their different technical performance, our exhaustive range of intumescent ® ® ®materials such as Kerafix Flexpan 200, Kerafix Flexpan 200 NG-G and Palusol T

allow a comprehensive variety of applications. Use them for fire-rated doors, fire-

rated glazing and applications as varied as fire-rated safes and ventilation and

HVAC systems.

-

-

-

-

-

-

-

-

-

-

-

23

SYSTEMS FOR HOUSING INDUSTRIES

ROKU SYSTEM

TYPE OF SEALING

CERTIFICATE

FIRE RESISTANCE

RATING

MAX. PIPE OUTSIDE

DIAMETER (mm)

APPLICATION IN

SOLID FLOOR

SYSTEM FROM (mm)

APPLICATION IN

SOLID WALL FROM

(mm)

COMBUSTIBLE PIPES

NON-COMBUSTIBLE

PIPES

ELECTRICAL LINES

AERATIONS

MFS Combined

Penetration

Seal

Combined

Penetration

Seal

ETA submitted

EN

classification

report

EI 90/120

Wall: 2200 x

1100 Floor:

1000 x ∞

≤ 150

≤ 100

ü

ü

ü

-

AWM II or

AWM II Light

Collar

ETA - 11/0208

EN

classification

report

EI 90/120/240

≤ 400

≤ 150

≤ 100

ü

-

-

-

AWM II KS

Collar

ETA-11/0372

EI 90/ 120

≤ 125

≤ 150

≤ 100

-

-

ü

-

EC Endless

Collar

Collar

ETA submitted

EN

classification

report

EI 60/90 /120/ 240

≤160

≤ 150

≤ 100

ü

ü

-

-

FPP Fire

Protection

Pillow

EN

classification

report

EI 90/120 600 x 600

-

≤ 150

-

-

ü

-

IWM III

Wrap

EN

classification

report

EI 90/120/ 180/ 240

≤ 110

≤ 150

≤ 100

ü

-

-

-

Rolf-Kuhn’s high-quality systems for the housing industry span a comprehensive

application space that includes sealing of cables and electrical lines in solid walls

and drywall partitions, sealing of combustible pipes and sealing of plastic pipes in

single or bundled form.

These systems can provide up to 240 minutes of fire-protection, ensuring

extremely secure fire-safe separations between walls and floors.

4A 167C Poonawadi, Dr. Ambedkar Road, Dadar (E), Mumbai - 400 014, India

Tel: +91-22-6457 7735 to 41 | Fax: +91-22-2413 3200 | sales@fgglass.com

® ®© 2015 FG Glass Industries Pvt. Ltd. All rights reserved. FG Glass, SCHOTT and PYRAN S are registered trademarks.