Bedding a Mosin Nagant for Accuracy (Pictures) in Mosin Archive Forum Forum

5/24/2018 Bedding a Mosin Nagant for Accuracy (Pictures) in Mosin Archive Forum Foru...

http:///reader/full/bedding-a-mosin-nagant-for-accuracy-pictures-in-mosin-archi

RSS Emai

0 Points

C+R Gun Collector Forums > Mosin archive Forum > Bedding a Mosin Nagant for accuracy (pictures)

Bedding a Mosin Nagant for accuracy (pictures)

Auth or Comment

RGRWJB Bedding a Mosin Nagant f or accuracy (pictures) Lead

Posts: 9268(07/05/05 08:59:41)Director/OwnerDirector/Owner

ReplyQuote

TAGS :None

The bedding tricks are quite similar for most of the bolt action military rifles.

1) The recoil lug must be tight and even up against the recoil bolt - the recoil lug must be straightened by filing, if the

contact point is not uniform.

2) The screw holes have to be adjusted if they prevent the recoil lug from contact with the recoil bolt.

3) Keeping the barrel from contacting the woods (the alternative method is to use oiled felt material to keep the barrel from

not touching the woods, other steps are the same - this was widely used by Russians for the 91-30's).

4) Centering the barrel in the woods - There 3 bedding points - flat area around the rear receiver screw, the flat area behindthe recoil lug and the chamber area of the barrel. Use oiled pieces of paper or bedding compound to make sure that the

barrel is in the correct position and the receiver will not bend when the screws are tightened.

5) Removing extra stock material so that the magazine doesn't touch the receiver or woods.

6) Remove wood from the stock so the receiver does not come in contact with it.

7) Be sure that the recoil lug doesn't touch the wood when tightened.

8) The screws have to be shortenedif they are too long reaching the bottom when tightened.

9) The front stock screw has to be tightened as tight as possible with the hand held screw driver - the rear one not quite as

tight.

Forum Jump

More

LOG IN ForgotPassword? SIGN UP Grab the Yuku app Search:10

Bedding a Mosin Nagant for accuracy (pictures) in Mosin archive Forum ... http://collectorguns35625.yuku.com/topic/834/Bedding-a-Mos

1 of 4 23/08/2



Auth or Comment

RGR WJB

C+R Collector Gun ForumsAdministrator/Owner

Last Edited By: RGRWJB07/23/08 20:51:55. Edited 1 time.

TaosBob101 Re: Bedding a Mosin Nagant for accuracy (picture s) #1

Posts: 942(07/05/05 13:56:53)

ReplyQuote

Another good -re-do of a past valuable article, that I never saved the first time.

LtlWilli Re: Bedding a Mosin Nagant for accuracy (picture s) #2

More


2 of 4 23/08/2



Auth or Comment

Posts: 153(07/06/05 01:14:19)Active Member

ReplyQuote

That is a very good, in-depth, rendition of how to do it...However well done, it still may not improve my own performance a

a shooter, though. I am just not THAT good---maybe if I kept at least one eye open during the firing process, things woul

go better for me.

I will give it a try , and will hopefully give my chances of hitting the broadside of the barn a big boost.

Karlunity Re: Bedding a Mosin Nagant for accuracy (picture s) #3

Posts: 85

(01/01/06 11:05:45)

ReplyQuote

Thanks RG. I had forgotten how to do that.

Take care

Karl

Life is simple.

"It takes a village to feed a T-Rex !

Snowman366 Re: Bedding a Mosin Nagant for accuracy (picture s) #4

Posts: 152(01/06/06 08:47:48)Moderator

ReplyQuote

Thanks so much, Br'er Wayne...I can make use of this. Only three of my Finnish M-N's shoot really well now after I brokethem down for a general inspection and preventive maintenance.

Clarkmag Re: Bedding a Mosin Nagant for accuracy (picture s) #5

Posts: 6(12/31/07 09:36:27)

ReplyQuote

You can see the gray Devcon Steel Putty, the two brass pillars and the tape under the sear.

More

More

More

More

Forum JumpShare This


3 of 4 23/08/2



C+R Gun Collector Forums> Mosin archive Forum> Bedding a Mosin Nagant f or accuracy (pictures)

Click to subscribe by RSS

Click to receive E-mail notifications of replies

Yuku forums Forum Find Forum Help Terms of Use Privacy

2012Yuku. All rights reserved.


4 of 4 23/08/2

Documents

Bedding a Mosin Nagant for Accuracy (Pictures) in Mosin Archive Forum Forum