BEG Sensors...BEG Luxomat: the brand BEG is a world class manufacturer of automated lighting sensors, and embraces the concept of customisation in its extensive range. Mounting options

Product Guide 2015

BEG Sensors

Innovation by Design

2

iautomation are proud to be the sole Australian distributors of products made by the industry-leading German company BEG, which specialises in high-sensitivity, high-quality presence and light detectors. As Australia’s leading project based provider of automated products and systems, iautomation understands that no two projects are alike - every building and its applications are different. You can be assured that when you purchase our products, you automatically receive the full benefit of our expertise at no additional cost.

The Company

BEG Luxomat: the brand

BEG is a world class manufacturer of automated lighting sensors, and embraces the concept of customisation in its extensive range. Mounting options include ceiling recessed, surface or flush mount, with fully or partially automatic operating modes, depending on preference and need. Sensors are available in an array of sizes and capacity options, designed for specific installations including office, hospitals, aged care facilities, residential develop-ments, warehouses, halls and gyms. No matter how precise your requirements, there is a BEG sensor ideally matched to suit every application. We invite you to browse our catalogue or contact us for more information and an obligation free quote for your next project.

3

Motion detectors are often designed to detect moving heat sources in their detection range and to automatically switch the respective lights on/off. This is made feasible with passive infrared technology. That means integrated infrared sensors register thermal radiation and convert these into an electrical signal. The sensor itself does not transmit any radiation and for that reason is referred to as a passive infrared sensor (PIR sensor). Objects and bodies, for instance those of persons, radiate heat. This heat is within the infrared range and is invisible to the human eye (see

If temperature differences now arise due to movement, they are detected by a sensor integrated in the motion detector and converted into an electrical signal that is evaluated by a processor and then triggers the switching for the connected fitting.

A multi-segment lens is positioned in front of the sensor (PIR) which bundles the invisible thermal radiation emanating from various directions to the sensor. The motion detector measures the thermal difference between the heat source and the environment. As soon as the signal from a heat source is registered by a segment, the detector reacts to the thermal difference and generates a signal that activates a relay.

Optimal sensitivity is generated by movements that are crossways to the motion detector. If an object or body moves towards or away from it, due to its operating principle, it only reacts if at least 2 active segments are covered.

Motion detector

Infrared image

.... for safety, comfort and energy-saving

.... Utilising the latest lens technologies

.... Introducing the new IR - Remote Control adapter for smart

Connect the adaptor to your smartphone.

Download the App B.E.G LUXOMAT from iTunes for iOS and Google Play for Android. 1 .

You now have a universal remote control !

2 .

3 .

4

Large Area 24m range 10 amp switching Day light harvesting

Economical 10m range Daylight harvesting Remote programmable

Corridor Optimised 40m range 10 amp switching Day light harvesting Ideal for corridor and car park applications

Advanced 10m range 1st Channel (10 amp switching) 2nd Channel (3 amp volt-free HVAC output) Master Slave operation Two time ranges Day light harvesting Remote programmable Auto/Semi-auto mode feature

Economical 10m range 1st Channel (10 amp switching) 2nd Channel (3 amp volt-free HVAC output) Master Slave operation Two time ranges Daylight harvesting Microphone detection (No remote option)

Corridor Optimised 40m range 10 amp switching 1st Channel (10 amp switching) 2nd Channel (3 amp volt-free HVAC output Master Slave operation Two time ranges Day light harvesting Remote programmable Switch input Auto/Semi-auto mode feature

Advanced 10m range Master/Slave operation Day light harvesting Remote programmable Auto/Semi-auto mode feature

Extra Long Range 24m range 2 Channels (10 amp switching) Master Slave operation Day light harvesting Remote programmable 2 Switch input Auto/Semi-auto mode feature

Long Range 24m range 3 channels (3 relay,3 Dali and 2 Relay ,1 Dali) Master Slave operation Day light harvesting Remote programmable 2 switch input Auto/Semi-auto mode

Micro Detector head 10m range Daylight harvesting Remote programmable 25 mm cut out IP65 rating optional on some models

External 20m range Daylight harvesting Remote programmable IP54


5

Long Range 24m range 3 channels (3 relay,3 Dali and 2 Relay ,1 Dali) Master Slave operation Day light harvesting Remote programmable 2 switch input Auto/Semi-auto mode

Economical 10m range 10 amp switching 1-10v analogue dimming Daylight harvesting Remote programmable

Extra Long Range

Powerful 24m range 10 amp switching 2x 1-10v analogue dimming Daylight harvesting Remote programmable

Small Dimension 10m range 25 mm cut out 10 amp switching 1-10v analogue dimming Daylight harvesting Remote programmable


10m range 24m range

10m range (25 mm cut out size)

24m range (3 channel)

PD4-Duo range has three models designed around Australian applications The Duo models are specifically designed for rooms that require two different lux control. With the use of optic fibres the sensors are able to pin point the light source, giving excellent LUX control whilst maintaining occupancy detection and saving on the need for additional sensors.

PD4-Trio range is similar to the Duo range in that it is designed to do window dimming and room lux control. It has an additional output designed to interface with the HVAC system allowing it to operate when the room is occupied, This feature has a dead band filter built in ensuring if someone walks into the room and does not occupy the room for a short period the HVAC will not turn on .

The BEG DALI sensors features

Switch input Dimming from a standard impress mechanism

Auto/Semi-auto mode feature

Constant light control providing daylight harvesting

10-30% output can be set after no motion is detected (orientation mode)

Networkable via 240V input This can be enabled by a time clock to control the run time.

Supports BEG standard slaves expanding the configuration to a simple sensor network

Programmable via iPhone IR or Via the standard remote control

Control up to 25 Dali/DSI ballasts in broadcast mode

Powerful 24m range 10 amp switching 1-10v analogue dimming Daylight harvesting Remote programmable

24m range (2 channel dimming)

6

PD2-M-2C-FC White 92165 2 Ch

PD2-M-2C-SM White 92150 2 Ch

PD2-M-1C-FC-T White 96565 1 Ch


PD2-S-FC White 96166 Slave

PD2-S-SM White 92152 Slave

Type Colour Part No Description

BEG PD4 Range (FC =recess mount & SM = surface mount)




PD4-M-1C-FC-T White 96585 1 Ch



PD4-S-SM White 92142 Slave

PD4N-1C-FC White 92149 1 Ch

PD4N-1C-SM White 92144 1 Ch

Advanced large area 24m range

BEG PD3 Range (FC = recess mount & SM = surface mount)

Advanced relay 10m range


General purpose relay 10m range

10m 1-30

BEG PD2 Range (FC = recess mount & SM = surface mount)

10m 1-30

24m 1-30

PD3-1C-FC* White 92197 1 Ch

PD3-1C-SM* White 92194 1 Ch



PD3N-1C-SM White 92190 1 Ch

PD3N-1C-FC-Mic White 92184 Dual Tech / PIR & Audio

PD3N-1C-SM-Mic White 92219 Dual Tech / PIR & Audio

PD3-2C-FC-Mic* White 96510 2 Ch Dual Tech / PIR & Audio

7

BEG PD4 Corridor Range (FC = recess mount & SM = surface mount)


PD4-M-2C-C-FC White 92143 2 Ch

PD4-M-2C-C-SM White 92440 2 Ch

PD4-M-1C-C-FC White 92586 1 Ch

PD4-M-1C-C-SM White 92587 1 Ch

PD4-M-1C-C-FS-FC White 92480 1 Ch

PD4-M-1C-C-FS-SM White 92485 1 Ch

PD4-S-C-FC White 92444 Slave

PD4-S-C-SM White 92442 Slave

PD4N-1C-C-FC White 92274 1 Ch

PD4N-1C-C-SM White 92270 1 Ch

Corridor 40m range

PD4-M-1C-GH-SM White 92245 1 Ch

PD4-S-GH-SM White 92265 Slave

High mounting up to 10m


Special purpose

PD4-M-2C-DUO-FC White 92251 Dual zone

PD4-M-2C-DUO-SM White 92158 Dual zone


24m 1-30

BEG PD4 Duo Range (FC =recess mount & SM = surface mount)

40m 1-30

BEG PD4 Great Height Range (SM = surface mount only)

22x44m 1-30

8

RC-plus 130 Deg White 97001 1 Ch




180-R White 92623 1 Ch (Dual Tech PIR/Audio)

180-R-2D White 92616 2 Wire (Dual Tech PIR/Audio)

BEG PD9 Micro Range (recess mount only)

PD9-1C-FC * White 92902 1 Ch



PD9-M-1C-SDB-FC White 92912 1 Ch (IP65)

PD9-S-SDB-FC White 92915 Slave

PD9-M-1C-GH-FC White 92923 1 Ch

PD9-S-GH-FC White 92928 Slave

PD9-M-1C-SDB-GH-FC White 92931 1 Ch (IP65)

PD9-S-SDB-GH-FC White 92933 Slave

Micro head 10m range

Wall mount 8m range

10m 12m

180

10m

20m 1-20

BEG 180 Range (wall mount)

1-30

BEG RC Plus Range (wall mount)


1-30


9

Cds-T-SM White 92367 1 Ch

HF-MD1 White 94401 1 Ch 1200 w

HF-H-MD1-ECO White 94430 High sensing type

HF-H-MD1-Standard White 94431 High sensing type

HF-MD2-SM White 94402 1 Ch 1200 w

Radar sensor 16m

BEG Cds-SM (surface mount)

Cds-SM* White 92369 1 Ch

External Lux sensor

BEG Cds-FC (recess mount)

Cds-FC White 92249 1 Ch

Internal Lux sensor

BEG Cds-T-SM (surface mount)

External Lux sensor with time clock

BEG High Frequency Range





1-30

1-30

10

PD2-M-DALI-FC-T White 96258 1 Ch DALI/DSI

PD2-M-DALI-SM White 92280 1 Ch DALI/DSI

PD4-M-DALI-FC-T White 96275 1 Ch DALI/DSI

PD4-M-DALI-SM White 92279 1 Ch DALI/DSI

PD4-M-DALI-C-FC White 92328 1 Ch Corridor DALI/DSI

PD4-M-DALI-C-SM White 92530 1 Ch Corridor DALI/DSI

PD4-M-DUO-DALI-FC White 92276 2 Ch DALI/DSI

PD9-M-DALI/DSI-FC White 92920 1 Ch DALI/DSI

PD2-M-DALI-1C-FC White 92486 1 Ch DALI/DSI, 1 relay

PD4-M-DALI-1C-FC White 92488 1 Ch DALI/DSI, 1 relay

PD2-DALI/Dsi-FC (recessed) PD2-DALI/Dsi-SM (surface mount) PD9 DALI/Dsi output

Digital Dimming PD2 (10m) PD4 (24m)


BEG Dimming Range (FC = recess mount & SM = surface mount) 0-10v output

PD2-M-DIM-FC White 92167 1 relay, 1 Ch 0-10 V

PD2-M-DIM-SM White 92153 1 relay, 1 Ch 0-10 V

PD4-M-DIM-FC White 92247 1 relay, 1 Ch 0-10 V

PD4-M-DIM-SM White 92147 1 relay, 1 Ch 0-10 V

PD4-M-DUO-DIM-FC White 92272 1 relay, 2 Ch 0-10V

PD4-M-DUO-DIM-SM White 92271 1 relay, 2 Ch 0-10V

PD9-M-DIM-FC White 92910 1 Ch, 0-10 V

Analogue Dimming PD2 (10m) PD4 (24m)


PD2 detection PD4 detection

1-30

1-30

BEG DALI/Dsi Range (FC =recess mount & SM = surface mount)

11

180 R

RC-Plus

PICO-M-1C-FC White 92712 1 Ch 2300 w IP65

PICO-S-FC White 92700 Slave

Micro IP 65 sensor 10m

BEG PICO sensor (in fitting mounting only)


TS-DD White 92681 1 Ch (IP54)head

BEG TS-DD (Din/surface mount)

External/ Panel Lux sensor with timer


1-10

BEG SCT-1 (Din mount)

SCT-1 White 92655 1 Ch

Staircase timer


1-10

12

Trio Range of sensors

BEG PD4-M-3C-Trio Range (FC = recess mount & SM = surface mount) Relay 3 channels

BEG PD4-M-Trio-DALI Range (FC = recess mount & SM = surface mount) DALI 3 channels

PD4-Trio-3D supports 3 DALI dimming channels. It is designed to control areas that require two constant light controls as well as various dimming levels on the 3rd channel. Using this model with slave units, it is possible to control large areas just with one master sensor which minimizes the costs of installation and hardware over conventional lighting control systems. Detection range seated 6.40m (occupancy)/ tangential 24 m / radial 8 m. Recommended height for mounting: 2 - 3 m , Light measurement: Mixed light, daylight + artificial light. Orientation lighting: 10 - 30 % of the nominal value. Follow-up time orientation lighting: 1 - 60 min. Max. no. of series-connected electronic DALI-ballasts: (25 + 10). 2 input contact for button for switching lighting on and off and dimming the lighting. - Channel 1 - DALI output - Channel 2 - DALI output - Channel 3 - DALI output

PD4-M-Trio-2R1D-FC White 92790 3 Ch

PD4-M-3C-Trio-FC White 92745 3 Ch Relay

PD4-M-3C-Trio-SM White 92740 3 Ch Relay


PD4-M-Trio-DALI-FC White 92755 3 Ch DALI

PD4-M-Trio-DALI-SM White 92750 3 Ch DALI

BEG PD4-M-Trio-2R1D-FC (recess mount only) Relay 2 channels DALI 1 channel

1-30


PD4-Trio-3R supports 3 relay outputs. It is designed to control areas that require 2 lighting zones plus 1 additional switch output control such as board lighting , task lighting and HVAC for energy minimization. Area of coverage: circular 360°, Detection range seated 6.40m (occupancy)/ tangential 24 m / radial 8 m Recommended height for mounting: 2 - 3 m , Light measurement: Mixed light, daylight + artificial light. Run-on time = 1- 60 min - Channel 1 - Relay output 3000 W, 230 V~, 3 A cos =1 / 1150 VA cos - Channel 2- Relay output : 3000 W, 230 V~, 3 A cos =1 / 1150 VA cos


25 max. Dali ballasts

10 max. Dali ballasts

x2

PD4-Trio-2R1D supports 2 relay outputs, plus 1 DALI/Dsi output. It is designed to control areas that require 1 dimmable lighting zone, 1 non-dimmable lighting zone plus 1 HVAC output for energy minimisation. A superior sensor for a cost effective solution. Area of coverage: circular 360°, Detection range seated 6.40m (occupancy)/ tangential 24 m / radial 8 m Recommended height for mounting: 2 - 3 m , Light measurement: Mixed light, daylight + artificial light. Run-on time = 1- 60 min - Channel 1 - DALI output : 25 Max. DALI Ballasts - Channel 2- Relay output : 3000 W, 230 V~, 13 A cos =1 / 1150 VA cos - Channel 3 - HVAC output (Heating, Ventilation, Air-conditioning), only operates on motion. 3A cos =1

1-30 x2

1-30 x2

13

Remote controls

Programmable Infra Red Remote Controls IR-PD

IR-RC 92000 Suitable for RC range

IR-CdS-T 92368 Suitable for CDs-T-SM

IR-PD-1C 92520 Suitable for PD2 & PD4 1CH range

IR-PD-2C 92475 Suitable for PD2 & PD4 2CH range

IR-PDN 92105 Suitable for PDN range

IR-PD-Duo 92092 Suitable for PD4-M-2C-Duo

IR-PD4-GH 92215 Suitable for PD4 Great Height range

IR-PD9 92201 Suitable for PD9 Great Height Range

IR-PDim 92200 Suitable for Duo/Dim range

IR-PD-DALI 92094 Suitable for Dali & Dali Duo range

IR-TRIO-2R1D 92473 Suitable for PD4-Trio-2R-FC

IR-PD4-TRIO-SWI 92102 Suitable for PD4-Trio-3R range

IR-PD4-Trio-DALI 92104 Suitable for PD4-Trio-3D range (Dali)

Type Part No Description

Wall bracket (surface mount range only) IP54 Weather proof socket Adaptor ring

Wall Bracket White 92441 Suitable for PD2, PD3, & PD4 range (surface mount)

Adaptor Rings White 81000 For oversized hole cut outs (recess mount)

IP44 SM base (TRIO) White 92386 Suitable for PD4-TRIO (surface mount)

IP54 SM base White 92161 Suitable for surface mounted sensors


BEG vandal proof cages

Recessed mounted Surface mounted

Wire Cage - RC sensors White 92467 Suitable for RC sensors

Wire Cage - FC sensors White 80000 Suitable for recessed sensors

Wire Cage - SM sensors White 92199 Suitable for surface mounted sensors


Coming

soon ! The all NEW

IR - Remote Con-

trol adapter for

Connect the adap-tor

Download the App B.E.G LUXOMAT from iTunes for iOS and Google Play for Android.

1 .

You now have a universal remote control !

2 .

3 .

14

All BEG sensors come with masks (blinds). These are required if the application requires the sensors not to trigger in areas where unwanted detection causes retriggering, For example, small offices where walking past the open door turns on the lights in the room . With correct installation, it is possible to accurately mask off unwanted areas.

Max. Number of T8 lights (eg. Osram)

2000 W / 2300 W 1000 W

single lamp double lamp single lamp double lamp

18 W 36 25 18 12

36 W 25 17 12 08

58 W 17 08 08 04

Max. Number of T5 lights (eg. Osram)

2000 W / 2300 W 1000 W

single lamp double lamp single lamp double lamp

24 W 28 13 14 07

49 W 28 13 14 07

54 W 19 13 09 04

80 W 13 09 06 03

Masks for B.E.G sensors

15

BCA Part Section J6

This code is designed to set a standard which defines the minimum requirements in relation to sensor use in domestic and commercial buildings. The BCA allows the increase of power density (W/M²) when devices such as presence detectors are incorporated into the design. Refer www.abcb.gov.au for more detail

A person entering a monitored area is detected when the infrared energy emitted from the intruder's body is focused by a Fresnel lens or a mirror segment and overlaps a section on the chip that had previously been looking at some much cooler part of the protected area. As the person moves, so does the hot spot on the surface of the chip. This moving hot spot causes the electronics connected to the chip to de-energize the relay, operating its contacts, thereby activating the detection input in the sensors program causing the output to be made . We recommend careful placement of the sensor to prevent false triggering and presence detection. The BEG range of PIRs do not project through glass so false detection from outside is not possible. This is done by tuning the wave length of the sensor. A person moving on the other side of the glass would not be 'seen' by the PIR. We also recommend that the PIR not be placed in such a position that an HVAC vent would blow hot or cold air onto the surface of the plastic which covers the housing's window. PIRs can have more than one internal sensing element so that with the appropriate electronics and Fresnel lens, it can detect direction. Left to right, right to left, up or down providing an appropriate output signal.

Operation and mounting rules

Sensor LED functions

The functional LED sensor indicators

Red LED indicates self checking mode (During the 60 seconds start up period ) Flashing at 1 second intervals EEPROM memory empty Fast flashing less than 1 second EEPROM memory contains program

Red LED indication in run operation Flashing irregularly Movement is being detected

Green LED indication in run operation (not applicable to slave sensors) Flashing regularly Sensor has achieved a LUX level greater than the set point > Flashing fast (>.1 sec) Sensor has a LUX value out of range Note: All slave sensors have only one green LED which indicates motion only. Slave sensors do not detect LUX levels.

The information contained in this brochure is correct at the time of publication, but is subject to change without prior notice, due to further development of the product details contained herein. Errors and omissions excepted.

© iAutomation Pty Ltd

Publication Date: Feb 2015

Publication Number: SZ042015

16

Australia | 1800 225 063 | www.iautomation.com.au

Documents

BEG Sensors...BEG Luxomat: the brand BEG is a world class manufacturer of automated lighting sensors, and embraces the concept of customisation in its extensive range. Mounting options