Embed Size (px)
Citation preview
Copyright 1987-2018 State Supply www.StateSupply.com
Toll Free: 800.772.2099 ■ Order Online: www.StateSupply.com ■ Fax: 651.774.7156 ■ [email protected]
2
Bell & Gossett Series 100 Circulating Pumps
Bronze or Cast Iron
Series 100 Circulating Pumps
Series 100 Pump Ordering Guide
New pump includes Flange Bolt Pack (bolts-nuts-flange gaskets) and tube of oil. Order pump flanges or isolation ball valves separately.
Pump Models & HP
Red Iron Pump for General Space Heating
Bronze Pump for Potable Water with Plastic Impeller Flange
Sizes Order
separately
Pump Dimensions Weight
Model No.
Pump No.
Order No.
Model No.
Pump No.
Order No. A B C Iron
Body Bronze Body
Series 100 1/12 hp,
1 ph 115 volts
100NFI 106189 BH1010 100BNFI 1/12 hp,
1 ph 115 volts
106197 BH1005 ¾, 1, 1¼, 1½ 14-7/8 6-3/8 12-3/4 20 21
1. Sleeve bearing, oil lubri-cated motor with resilient, sound-dampening motor mounts for long life.
4. Oversize precision ground pump shaft is oversized to provide long seal and bearing life.
2. Noise dampening spring coupler. Motors are ODP with overload protector, 115V.
5. Mechanical seal withstands the harsh heating systems. Pumps to 125 psi @ 225° F.
3. Completely repairable. A listing of repair parts can be found on the following page.
Fits pipe sizes 3/4” to 1-1/2” with the appropriate pump flanges or isolation ball valves.
Pump Features and Benefits
Pump Capacities for B&G Booster Pumps
Seems like everyone uses these long-lasting, repairable booster pumps in their boiler room! Available in iron (red) or bronze bodies for domestic potable water.
Completely repairable pump!
Bronze Pump for Food Service Flange Sizes
Order sepa-rately
Pump Dimensions Weight
Model No.
Pump No.
Order No. A B C Bronze
Body
100AB 1/12 hp,
1 ph 115 volts
106192 BH1005A ¾, 1, 1¼, 1½ 14-7/8 6-3/8 12-3/4 21
Series 100, Bronze Pump with Brass Impellers for Food Service
Lubricate pump & motor with supplied lube oil before placing into service.
Copyright 1987-2018 State Supply www.StateSupply.com
Toll Free: 800.772.2099 ■ Order Online: www.StateSupply.com ■ Fax: 651.774.7156 ■ [email protected]
3
“EZ” Pump & Motor Assemblies for Bell & Gossett 100
Pump & Motor Assemblies allow for Easy Replacement of Bell & Gossett 100 Pumps and SAVES YOU MONEY!
Bronze bearing assembly with bronze impeller
Bronze bearing assembly with plastic impeller
Iron bearing assembly with plastic impeller
1.
2.
3.
Item No.
Pump & Motor Assemblies Construction and Application HP Voltage Replaces the following
Bell Gossett pumps: Ship
Weight in lbs.
Order No.
1. The Popular One! Cast iron bearing assembly with plastic impeller for standard heating.
1/12 115V
1 phase 60 Hz
Existing pump has a red-colored bearing assembly and red-colored motor. Existing unit may have 100 NFI, 106189, 118844 or 189134 shown on the bearing assembly.
15.6 BH1011
2. For Potable Domestic Water Bronze bearing assembly with plastic impeller for domestic potable water.
Existing pump has a bronze-colored bearing assembly with a red-colored motor. Existing unit may have 100 BNFI, 106197 or 189034 shown on the bearing assembly.
15.6 BH1012
3. Bronze bearing assembly with bronze impeller for domestic potable water and food service applications.
15.8 BH1013 Pump has both a bronze-colored bearing assembly and motor. Existing unit may have 100 AB, 106192 or 189034 shown on the bearing assembly.
The new EZ Pump and Motor Assemblies for Bell & Gossett series 100 pumps save you both time and money when replacing these workhorses of the industry.
No need to replace the entire pump, including the volute. It’s more efficient in both time and money to simply replace the pump and motor assembly - It’s an easier job than taking the entire unit off the piping, and it costs less money to purchase the pump and motor assembly.
Remove the old pump assembly from the Volute
Volute
Bolt-on the new one to the existing volute, wire it up and you’re done!
Advantages of the EZ Pump and Motor Assemblies: ■ You can keep the existing pump volute in the pipe line - No need to remove or replace the volute pump component. And when you leave the volute in the pipe line, you are spared the hassle of goofing around with all that other stuff!
■ You can save money! The cost of a complete new pump with the volute is considerably more than the EZ Pump and Motor Assemblies. Features and Benefits:
■ Original & New Bell & Gossett manufactured bearing assemblies and impellers. ■ Comes with all the components needed for proper attachment to existing volute: New volute gasket, bolts and nuts, tube of oil and instructions. ■ Mechanical seal withstands the harsh heating systems. ■ Pumps to 125 psi @ 225° F. ■ Precision ground bearing assembly pump shaft is oversized to provide long
water seal and bearing assembly life. ■ Energy efficient U.S. Motors: 1/12 HP, 115 volts with overload protection. ■ Motor suspended in cradle with noise dampening motor mounts to reduce
ambient sounds emanating from the pump assembly. ■ 18-month warranty from date of purchase.
Available for Same-Day Shipping. Call 800.772.2099
Bearing Assembly
Copyright 1987-2018 State Supply www.StateSupply.com
Toll Free: 800.772.2099 ■ Order Online: www.StateSupply.com ■ Fax: 651.774.7156 ■ [email protected]
4
Repair Parts for Series 100 B&G Circulating Pumps
Item No. Description Bearing Assy. No.
189134 (Red) Bearing Assy. No.
189034 (Bronze)
6 Front Bearing BG1460 BG1460 7 Front Bearing Gasket BG1614 8 Impeller Key for Shaft BG1527 2 Impeller Nut BG1519K BG1542 12 Oil Well Cover BG1620 9 Shaft and Sleeve BG1440
Repair Parts for Bearing Assemblies
The replacement Bearing Assemblies also include the seal kit, body gasket, tube of oil. The impeller is included with the 189134 bearing assembly, but not included with the 189034 bearing assembly - Order separately.
Repair Parts for Bell & Gossett 100 Pumps
Item No.
Description 100NFI 106189
Red
For Space Heating
100AB 106192 Bronze
For Food Service
100BNFI 106197 Bronze
For Potable Water
16 Replacement Bearing Assembly 189134 189034 189034 3 Impeller, ¹plastic impeller ² bronze impeller ¹BG1510 ²BG1205 ¹BG1510 13 Coupler (also order a Motor Mount set) BG1490 14 Motor (Power Pack) 1/12 h.p., 1 ph BG1080 15 Motor Mount Set (2 ea.) BG1150 5 Seal Kit (also order a Body Gasket) BG1300 4 Body Gasket BG1520 10 Oil Wick Set BG1200
Sold by the single flange.
Pump Flange (1 ea) & bolts/nuts for ¾” pipe BG1005 BG1040 BG1040 Pump Flange (1 ea) & bolts/nuts for 1” pipe BG1010 BG1045 BG1045 Pump Flange (1 ea) & bolts/nuts for 1¼” pipe BG1015 BG1050 BG1050 Pump Flange (1 ea) & bolts/nuts for 1½” pipe BG1020 BG1055 BG1055
Sold by the pair.
Isolation Ball Valves (pair), ¾” pipe size BI2700 Isolation Ball Valves (pair), 1” pipe size BI2701 Isolation Ball Valves (pair), 1¼” pipe size BI2702 Isolation Ball Valves (pair), 1½” pipe size BI2702B Gasket Set (2 ea.) for above Pump Flanges BG1185 2 oz. Tube of B&G pump lube oil BG1145 Flange Bolt Pack with Flange Gaskets BG1561H
Pump Model ► Pump No. ►
Pump Color ►
Replaces the standard pump flange to make easy work of repairing or replacing your B&G 100 series pump. Sim-ply turn off the valves, unbolt the pump from the flange and take it out for repair or replacement.
Order above!
Nameplate found here on bearing assembly.
Impeller included with 189134 Bearing Assembly
Pump Flange Isolation Valves
Replaces the Pump
Flange
189134 Bearing Assembly
The popular bearing assembly, includes new impeller attached to the pump shaft.
Bearing Assembly
