Beneteau Oceanis 473

Beneteau Oceanis 473

Make: Beneteau Hull Material: Fiberglass

Model: Oceanis 473 Number of Engines: 1

Length: 47 ft Fuel Type: Diesel

Price: $ 249,000 Number: 4214771

Year: 2004

Condition: Used

Location: Ventura, CA, United

States

Description

The Beneteau 473 Oceanis is handsome, well equipped, and performs better than some of

Beneteau's later models.

This boat was bought new by its current owner, who has taken excellent care of it ever since. It

is the 2-cabin owner's version, with the classic rig, and comes with some nice extras including: factory installed teak deck, air conditioning & heat, and a full cockpit enclosure.

Call now for more info.

Denison Yacht Sales - Tom Hugh-Jones Downtown Yachting Center, 401 S.W. 1st Avenue, Ft. Lauderdale, FL 33301, United States

Toll-free: 888-802-5382 Tel: (310) 658-0700 Tel: (954) 763-3971 [email protected] http://www.denisonyachtsales.com

mailto:[email protected]?subject=Scribd%20Inquiry:%20Beneteau%20Oceanis%20473

http://www.denisonyachtsales.com/

Measurements

LOA:

LWL:

Beam:

46 ft 11 in

43 ft 10 in

14 ft 2 in

Ballast:

Displacement:

8157

lb

24277

lb Dry Weight: 24277 lb

Fuel Tanks Capacity: 56 gal

Fresh Water Tanks Capacity: 209

gal

Number of single berths:

8N

umber of Heads: 2

Propulsion

Number of Engines: 1 Engine Year: 2004

Primary Engines: Inboard Total Power: 63 hp

Engine Make: Westerbeke Propeller Type: 3 Blade

Engine Model: 63D

Accommodations

INTERIOR WOOD:

African Douca Cherry stained interior finish.

Wooden floorboards with black striping in salon

Mattresses & cushions - high density foam with removable covers Wooden cabinet doors with ventilation louvers.

FORWARD CABIN: Double berth (6'10" x 5' 1" approx.)

(2) storage drawers beneath berth Storage shelves with slotted doors

Hanging locker Settee Shelving on hull

FORWARD & AFT HEAD (Both Versions): 1 piece molded fiberglass liner for water tightness and easy cleaning

Separate shower (forward head only) with marine toilet Fiberglass wash hand basin, vanity cabinet, mirrors.

SALON U-shaped salon with settee

Salon table with inlays and extending leaves with aluminum legs

Central bench seat with storage

Storage cabinets on hull

Hull sides lined with wood Beneteau Oceanis 473

Page 2 of 12

Douca Laminated Cherry Stained companionway steps with non-skid stripping.

Hinged with pneumatic lifting arms for access to engine room

NAV STATION Chart table with stowage

Bookshelf

Mounting panel for navigation instruments

GALLEY Storage cabinets along hull sides

Double S/S sink

Mixing tap for hot/cold pressurized fresh water

12V Electric freezer / refrigerator 7.7 cubic ft.Top loading freezer and front loading refrigerator

S/S 3 burner Force 10 stove with protective S/S bar

Trash can under counter

AFT CABIN King Sized berth (7' x 6' approx.) !

Hanging locker

HEATING - AIR CONDITIONING Dual Factory Installed Taylor Made Cruisair Heating/Air Conditioning Units

16000 BTU/Hr Capacity Each Provides Full Computerized Climate Control Throughout Vessel

A $12,000 Factory Option

PLUMBING Self-bailing cockpit Manual bilge pump

Electric bilge pump with automatic switch

Ice box drained by pump

Fresh water cockpit shower

223 gal fresh water capacity

Anodized aluminum water filler cap

Hot/cold pressurized fresh water 2 x 22 gal holding tanks

Electronics

Raytheon ST60 Tridata

Raytheon ST60 Wind

Raychart RL70C Plus Radar/Plotter Helm

Raychart 520 Plus Radar/Plotter Nav Station

Raymarine Raydome 2D 18" 2kw Radar

Raymarine ST6001 Smart Pilot Autopilot Raymarine Type 2 Linear Autopilot Drive

Raymarine S3 SmartPilot Core Pack

(2) Raymarine ST60 Multi-Function Displays

VHF with Antenna Stereo/CD Player

500 watt stereo amplifier

Beneteau Oceanis 473 Page 3 of 12

Tappan 750 watt Microwave designed to run on shore and inverter power

Electric Winch

12 v Electric Toilet (owner's head)

Shore Power Cord Hot & Cold Cockpit Shower

Sails

Neil Pryde Classic Main - (Points higher & runs faster than furling main)

140% Neil Pryde Roller furling genoa (new Sunbrella Covering 2010)

100% Neil Pryde Heavy Weather Jib (never used) Neil Pryde Asymmetrical and Chute (never used)

Neil Pryde Performance Sail Upgrade (1132 sq. feet of sail area)

Rigging & deck

RUNNING RIGGING:

Genoa halyard(1) Mainsail halyard Boom topping lift

Dual Classic Main reefing lines led back to cockpit

Genoa roller furling control line(2)

Genoa sheets(1)

Mainsheet

Solid boom vang led to cockpit(2)

Main traveller control lines

STANDING RIGGING:

Discontinuous S/S 1X19 rigging: forestay, babystay, twin backstays, upper and lower cap

shrouds, intermediates and aft lower shrouds

Shroud rollers on babystay

SPARS: Keel stepped, anodized aluminum mast

Double aft-swept spreaders Anodized aluminum boom

Deck collar with blocks

DECK GEAR: S/S pulpit with bi-color navigation light

S/S stern rail with life ring holder and flag staff holder

S/S stanchions w/ Double lifelines

Lifeline gates(3)

S/S handrails on coach roof (2)

Dorade vents (ventilation for salon) (2)

Dorade vent guards (2)

Teak toe rail cap

Genoa tracks (3m) with adjustable cars(2)

Genoa foot blocks with jammers(2)

54 CSTO Lewmar primary genoa sheet winches, mounted on cockpit coaming near helm Roller


furling genoa system, with drum installed above deck

Mainsheet track on coach roof with ball bearing traveller (controls led back to cockpit)(1)

40 CST Electric Lewmar maneuvering winch on port(1)

40 CST Lewmar maneuvering winch on starboard

All halyards and reefing lines led back to cockpit - genoa and main halyards may be jammed off

and stowed at the mast

(10) Spinlock clutch stoppers on coach roof

(6) Folding pad eyes - 2 for foreguy, 4 for genneker sheets

(3) Winch handles

EXTERIOR EQUIPMENT HULL & DECK:

(1) Locker under port helm seat

(1) Locker under starboard helm seat

(1) Locker with 2 gas bottles on port side

(2) side cockpit lockers

Swim platform with locker underneath

Transom with teak inlays on swim platform and locker lid

Teak inlaid cockpit seats

Cockpit console with wheel and compass, space for installation of electronics, removable table with fold down leaves, drained storage compartment, drink holders and a cockpit light.

(3) Winch handle pockets

Cockpit shower - hot & cold

Hinged transom door

S/S swim ladder

Beneteau Factory Installed Teak Deck

STEERING SYSTEM: Spade rudder with composite rudder shaft

Twin steering stations each with mounted compass

(2) S/S leather wrapped steering wheels w/ Emergency tiller

FULL COCKPIT ENCLOSURE - WHITE STAMOID with EMERALD GREEN STRATOGLASS a $20,000 installation.

Ground tackle

Self-bailing chain locker with eye strap

S/S stem head with 2 rollers - extended on starboard side for the primary anchor

(6) anodized aluminum mooring cleats

Electric windlass

200 ' 3/8 BBB Chain

150' 5/8" Rode

45 lb Bruce Anchor


Electrical

Grounded rig

Conduit for options - transom to chart table, mast to chart table, forward cabin to chart table.

12 volt socket at the chart table

110 volt control panel under chart table

110 volt outlets - (1) in each cabin, head, galley, salon and at chart table

4 Additional 110 volt outlets throughout interior

110 volt shore power socket on transom

Halogen overhead lighting in cabins, salon, galley

Fluorescent tube lighting in galley

Reading lights in each cabin

Nav station light

Independent switches for lights

Cockpit light plug Bi-color nav light

Stern light

Combination deck and steaming light

Anchor light

Engines

63 hp Westerbeke 63D engine with ONLY 358 hours in perfect condition

Engine beds integrated into hull liner

Engine control panel integrated in port cockpit coaming

(1) 3 bladed Flexofold 20X13 folding prop

(1) 3 bladed 20X13 Fixed Prop

Engine compartment soundproofed with foam

S/S prop shaft with composite epoxy/glass stern tube

Galvanic Isolator

Fuel capacity 57 gal

12 volt Leece-Neville 90 amp alternator

Xantrex Freedom 20 - 2000 watt/100 amp inverter/charger w/ Link 1000 Computerized Remote

1 x 92 amp 12 volt - AGM start battery New Jan 2010

3 x 200 amp 12 volt - AGM House batteries - 600 amps total (3 - 200ah 4ds) New Jan 2010

Construction

HULL: Laminated G.R.P. hull with internal fiberglass grid hull liner, reinforced with

unidirectional rovings

DECK: Balsa sandwich for stiffness, thermal and acoustic insulation. Vinyl headliner with cherry

strips in salon & cabins Bulkheads bonded 360 degree to hull and deck for structural strength

Full length Factory Installed TEAK Decks - a $13,000 option. Beneteau Oceanis 473 Page 6 of 12

disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the

accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


Photos






Documents

Beneteau Oceanis 473