RESUME OF MR BENJAMIN FAIRCLOUGH

Mobile: 0411 868 930.E-Mail: benfairclouqh@.hotmail.com

SECTION 1: PROFESSIONAL PROFILE

A decisive, responsible and adaptable Piping Designer with roughly 7 to 8 years experience in themining resources sector and Oil and Gas. Key strengths include a commitment to the team andadaptability for an ever-changing work environment. I am a conscientious worker who is alwaysmindful of meeting or coming in ahead of deadlines whilst still producing quality work, and I pridemyself on seeing a project through to a successful conclusion. I am very motivated in thecontinuance of my knowledge and skill development within these industries and as such feel myskills are transferrable to other sectors if required to do so. I am currently seeking a PipingDesigner role with long term growth and development prospects, however short term contractsare also desirable,

SECTION 2: KNOWLEDGE, SKILLS & ABILITIES

o Plant Layout - During my role with HATCH, I was responsible for laying out areas thatconsisted of tanks and pumps in accordance with project standards. I was proficient atimproving designs while also working to a tight budget e.g. where the client was focussedon cost savings around space and product.

© 3D Microstation Modelling - High level ability to devise a variety of concepts to thendetermine the best model for achieving the end result, while also considering the projectconstraints, such as budget, limited space, supporting pipes, operational maintenance,safety and design standards. Due to my conceptual ability, I am able to meet both clientrequests and industry standards.

o Piping and Instrument Diagrams - I have been responsible for producing intelligentpiping and instrumentation diagrams. This involved drafting drawings, analysing theprocess, and providing feedback to the engineer. Strong communication abilities withinter-discipline groups and high attention to detail supported the business with this pivotalphase of the project.

• Statutory Regulations - My role in piping, assisted the client to meet statutoryregulations. I did this by self-containing fluids within the pipe so standards weren'tbreeched. I ensured the piping was kept within bunded areas, with the safeguard ofdouble contained piping for fluids exiting the bunded area.

• Mentor - As a member of Ambassador Group I was responsible for providing coachingand guidance to junior staff. This has helped develop my knowledge and leadershipqualities, and therefore added value for the organisation.

• Adherence to Company Standards - Through out my modelling or drafting I adhere toAustralian standards and company standards.

SECTION 3: EDUCATION AND PERSONAL DEVELOPMENT

Education;

a) 2013- Piper Boot Camp online at the Society of Piping Engineersand Designers (SPED).

b) 2013- Completed Advanced Diploma of Engineering at Outsource Institute ofTechnology.

c) 2006- Completed Year 12 at Trinity College in Perth, Western Australia, Australia.

Personal Development:

a) Work Experience (Attendance: 1 day per week whilst completing Year 12 at Trinity)-• August 2006 to October 2006- Brockdricks and Son Architects

> Drawing Plans for Government Buildings.> Drawing Furniture Cell Libraries.> Site Visits

b) Work Experience (Attendance: 1 day per week whilst completing Year 11 at Trinity)-o March 2005 to March 2006 - Sinclair Knight Merz (SKM).

> Drawing 2D Mechanical Assemblies.> Drawing Mechanical Processes.> Drawing Standards-with emphasis on Safety Precautions.> Perspective drawings.

c) Computing Skills-

Microsoft WordPlant Space DesignSeriesPlant Space P&IDData ManagerMicrosoft ExcelMicrosoft PublisherSketch Up ProMicrosoft PowerPointOutlookInternetAdobe PhotoshopSmart Plant P&ID

Microstation V8i and XMPDS (Equipment andRaceway Modeling)IsoExtractorSupport ModelerAutoCADAutoCad P&IDIronCADMechanical DesktopCorelDrawBentley NavigatorTriformaInventor

d) Ambassador for the Young Designers in the Professional Development Program (PDP-Hatch).

SECTION 4: WORK HISTORY

Heerema Marine Contractors (HMC), Perth, Western Australia, Australia.July 2014 to February 2015.

Client: Inpex.Project: Ichthys.Location: Ichthys Field - Browse Basin off shore Western Australia.Role: Sub Sea Designer / Draftsman.3D modeling / 2D Drafting (structural Drawings).

The scope of work includes the transportation and installation of flowlines, production flowlines,integrated pipeline structures, large subsea structures, a subsea riser support structure, andmoorings for future floating production storage and offloading and central processing facilities.The scope of work was awarded to Mcdermott and Heerema Marine Contractors. The projectdrawings were done using Bentley Microstation to produce designs in a 3d model and create 2ddrawings.

My role on the project was to produce a 3D model, 2D installation drawings for colleagues onboard the vessel (Aegir) for them to be able to install subsea structures offshore, rigging drawingsto help with heavy load lifts, using the onboard crane to pick up and lower structures onto the seabed floor etc (this involved working our co-ordinates, maximum lifting heights and angles etc.),structural drawings such as detail drawings of spreader bars, spacer bars, tri-plates, barge fit outsand piping detail drawings.

Leicon Notley, Perth, Western Australia, Australia.April 2014 to July 2014.

Client: Water Corporation.Project: Water Corporation Water Tanks and Prevention of FallsLocation: Western Australia Region.Role: Intermediate Piping and Structural Designer / Drafting

There are approximately 269 water storage tanks located in various regions all around WesternAustralia. The project consisted of producing over 2,000 detail design drawings to be constructedin our design office and workshop. The workshop is located behind the design office, andtherefore had direct contact with the fabricators and hands on experience.

Due to the storage tanks being in remote locations there was no room for error, the drawing hadto be exact with minimal tolerances. I produced detail design drawings to fabricate handrails(guardrails), self-closing gates, drop bars, ladder climbing systems etc, using AutoCAD2014. Iwas also working one on one with a senior structural engineer and a site engineer in order tocome up with the correct design to construct and build in the workshop and then construct on siteto prevent falls and make sure the tanks structures are up to the Australian standards.

Technip, Brisbane, Queensland, Australia2013 to 2013

Client: SANTOS.Project: CSG GLNGLocation: Roma, Queensland, Australia.Role: Intermediate Piping Designer.

• Produced Process Flow Diagrams, intelligent P&IDs and all 2D arrangement drawingdeliverables utilizing relevant AutoCad 2013 software.

• Produced 3d model using Sketch Up Pro, which was utilized on the project to quickly modeland generate conceptual ideas.

• I also helped produce a 3d model to sell client for the next phase of the project, whichincluded all the piping, pipe fittings and valves, pipe racks, supports, pumps, structures,tanks, pumps etc.

Hatch, Brisbane, Australia2007 to 2013

Client: Energy Resources of Australia.Project: Tailings & Brine Management Project.Location: Darwin, Northern Territory, Australia.Role: Intermediate Piping Designer.

• Pipe modeling and plant layout of the Pit 3 return area (2 tanks, 3 pumps and a pig receivingstation) using Plant Space Design Series.

• Attended weekly design reviews for client and engineering feedback.• Produced intelligent P&IDs and all 2D arrangement drawing deliverables utilizing relevant

PlantSpace and Microstation software.

Client: Ma'aden & Alcoa.Project: Ma'aden Mine and Refinery Project.Location: Ras Al Khair, Saudi Arabia.Role: Lead Designer, Electrical and S&PC.

• Equipment and Raceway Modeling of Digestion, including all cable tray and conduit routing,plus tagging of electrical equipment.

• Attended weekly design reviews for client and engineering feedback.• Produced 2D arrangement drawing deliverables utilizing relevant PDS software.

Client: Energy Resources of Australia.Project: Integrated Tailings & Water Closure Project (ITWC).Location: Darwin, Northern Territory, Australia.Role: Intermediate Piping Designer.

• Produced intelligent P&IDs and back drafted PFDs in consultation with Process Engineers.

Client: Energy Resources of Australia.Project: Brine Concentrator Project.Location: Darwin, Northern Territory, Australia.Role: Junior Piping Designer.

• Plant layout of the utility area including diesel tankage, compressor area and rack piping (2tanks, pumps, several rack bents, compressor, receiver etc). Experience gained in Victaulicand plastic piping, plus exposure to high-pressure steam piping, pipe support designincluding spans required for various pipe materialsr

• Rack pipe development involved utility piping, standards for utility stations, steam traps etc.• Produced Isometrics, 2D piping standard details, 2D General Arrangement deliverables,

P&IDS and PFDs.• The software utilized included Plant Space Design Series, Support Modeler, IsoExtractor,

Microstation XM and PlantSpace P&ID.

Client: BFIP Billiton.Project; West Cliff Coal Preparation Plant.Location: Wollongong, New South Wales, Australia.Role: Junior Piping Designer.

• 3D Modeling using Plant Space Design Series and placing of supports in the 3D model usingSupport Modeler

• Drafting and back drafting PFDs and P&IDs using Plant Space P&ID.• 2D support drawings and standard detail drawings, using Microstation XM.» Produced 2D General Arrangements deliverables using Microstation XM and Microstation

V8i.

Client: Xstrata Nickel.Project: Koniambo,Location: Kone, North Province, New Caledonia.Role: Junior Piping Designer.

• Drafting, back drafting P&IDs using Plant Space P&ID.

Client: SEQ Government / Veolia Water.Project: Western Corridor Advanced Water Recycling Plant.Location: Pinkenba, Queensland, Australia.Role: Junior Piping Designer.

• Drafting and back drafting P&IDs using Plant Space P&ID,• Manually modifying Isometrics to 'As Built" status and converting all Microstation drawings to

AutoCAD.

Client: Norilsk NickelProject: Tati Project.Location: Botswana.Role: Junior Piping Designer.

• Draft and back draft intelligent P&IDs using Plant Space P&ID.

Client: Anglo Platinum.Project: Rustenberg Base Metal Refinery (RBMR) Expansion Project.Location: North West, Rustenberg, South Africa.Role: Junior Piping Designer.

• Draft and back draft intelligent P&IDs using Plant Space P&ID.• Entering data and tags into Data Manager, enabling piping designers to intelligently tag

equipment, lines, valves, specialty items, etc. in the 3D model.

Hatch, Perth, Western Australia, Australia.2007

Role: Trainee / Junior Piping Designer,

• General drafting duties, standard details, 2D extraction and low level P&ID, PFD and pipelayout work.

• Assisting the IT. Department, gaining experience in low level IT and CAD support services.• Attended one day a week at Subiaco Tafe, studying for an Advanced Diploma of Engineering.

TNT Couriers, Perth, Australia.2006

Role: Dock Hand

• Temporary work whilst waiting for Hatch cadetship to start.• Dock hand working in warehouse, general lifting and packing duties.

SECTION 5: REFEREES

Kerry NaylorPiping Hub LeadHATCHPerth / Brisbane, 4000Ph: (07) 3166 7777

Mike HewittDesign CoordinatorHATCHBrisbane, 4000Ph; 0427 901 535

Bob MercerSenior Piping DesignerDRM ServicesBrisbane 4064Ph: 0402 706 044

Peter TaylorLead Piping DesignerHATCHEmail:peter.tavlor168@.qmail.com

David NesbitDesign Lead AustralasiaTechnipPerth, 6000Ph: 0402 444 859Email: Dnesbit@technip.com.au

Edwin Den BlankenLead DraughtsmanHeerema Marine ContractorsPerth, 6000Ph: 0426 002 461

Outsource istilutof TechnologyYour Training & Development Specialists

THIS IS TO CERTIFY THAT

BENJAMIN FAIRCLOUGHHAS SUCCESSFULLY FULFILLED THE REQUIREMENTS IN

ADVANCED DIPLOMAOF ENGINEERING

MEM60105AT THE

OUTSOURCE INSTITUTE OF TECHNOLOGY

DATED THE9 May 2013

The Qualification certified herein is recognised within the Australian Qualifications Framework.

A summary of the employability skills developed through this qualification can be downloaded fromhttp://www.employabilityskills.training.com.au

Namonally ricogmsio Provider Number 31560Training

jennifer townendChief Executive Officer

Outsource iof TechnologyYour Training & Development Specialists

STATEMENT OF RESULTSFOR

BENJAMIN FAIRCLOUGHADVANCED DIPLOMA OF ENGINEERING MEM60105

Unit Code Unit DescriptionMEM09005B Perform Basic Engineering Detail DraftingMEM09141A Represent Mechanical Engineering DesignsMEM09151A Apply Computer Aided Modelling and Data Management Techniques to Mechanical Engineering DesignsMEM12024A Perform ComputalionsMEM12025A Use Graphical Techniques and Perform Simple Statistical ComputationsMEM14061A Plan and Design Mechanical Engineering ProjectsMEM14081A Apply Mechanical Engineering Fundamentals to Support Design and Development of ProjectsMEM16006A Organise and Communicate InformationMEM16008A Interact with Computing TechnologyMEM22001A Perform Engineering ActivitiesMEM22002A Manage Self In the Engineering EnvironmentMEM22004A Manage Engineering ProjectsMEM22007A Manage Environmental Effects of Engineering ActivitiesMEM23003A Operate and Program Computers and/or Controllers in Engineering SituationsMEM23041A Apply Basic Scientific Principles and Techniques in Mechanical Engineering SituationsMEM23051A Apply Basic Electro and Control Scientific Principles and Techniques In Mechanical and ManufacturingMEM23061A Select and Test Mechanical Engineering MaterialsMEM23071A Select and Apply Mechanical Engineering Methods, Processes and Construction Techniques ¦MEM23081A Apply Scientific Principles and Techniques In Mechanical Engineering SituationsMEM23091A Apply Mechanical System Design Principles and Techniques In Mechanical Engineering SituationsMEM23093A Apply Plant and Process Design Principles and Techniques In Engineering SituationsMEM30001A Use Computer Aided Drafting Systems to Produce Basic Engineering DrawingsMEM30002A Produce Basic Engineering GraphicsMEM30003A Produce Detailed Engineering DrawingsMEM30004A Use Cad to Create and Display 3d ModelsMEM30005A Calculate Force Systems within Simple Beam StructuresMEM30006A Calculate Stresses in Simple StructuresIVIEM30007A Select Common Engineering MaterialsMEM30009A Contribute to the Design of Basic Mechanical SystemsMEM30012A Apply Mathematical Techniques in a Manufacturing Engineering or Related EnvironmentMSAENV272B Participate In Environmentally Sustainable Work Practices

The Qualification certified herein is recognised within the Australian Qualifications Framework.

A summary of the employability skills developed through this qualification can be downloaded fromhttp://www,employabilityskills.training.com.au

Nationally Rlcognisld Provider Number 31560Training

MARINECONTRACTORS

23 January 2015

To Whom It May Concern,

Ben Fairclough worked for Heerema Marine Contractors for aperiod of 6 months on the Ichthys project. Ben has been working asa Draughtsman for our Australian business since June 2014. In hisrole he was required to assist the installation engineering team ledby Yigal Oosterink during a peak workload period.

Heerema Marine Contractors Australia Pty Ltd

Level 10, 190 St Georges Tee

Perth WA 6000Australia

Tel:+61 [0] 8 6430 5100www.heerema.com

Registered in Western Australia

ABN 31 009 384 570

Ben covered all aspects of drafting for Ichthys project in relation to the transport and installationof the Riser Support Structure and Lifted Structures scope using HMC's installation vessel DCVAegir. Whilst working for the team Ben reported to the lead Draughtsman Edwin den Blanken inHMC's Perth based office.

The drafting work Ben worked on for the project entailed:

3D modeling of rigging / lifting sling laydown arrangements3D modeling and 2D design drawings of grillage and sea fastenings for structure transports3D modeling and 2D design drawings of lifting spreader bars3D modeling and 2D design drawings of miscellaneous installation aids3D and 2D installation sequence drawings2D barge / vessel layouts

Although new to the offshore installation engineering world, Ben quickly took to his role ofinstallation engineering Draughtsman, He delivered a strong performance and was a pleasure towork with. He was very eager to learn the specific aspects of offshore installation in the oil andgas industry.

I have found him to be a professional and results driven individual whom I would highlyrecommend.

Yours sincerely,

Yigal OosterinkLead Woject Engineeryoosterink@hmc-heerema.com

+61 [0]8 6430 5135

Edwin den BlankenProject Draughtsmanedenblanken@hmc-heerema.com

+61 [0]8 6430 5160

9HA HEEREMA GROUP COMPANY