Bernina 330

1. Shuttle Door/cover plate2. Free Arm3. Needle/stitch Plate4. Presser Foot5. Needle Clamp Screw6. Thread Guide7. Take-up Lever8. Thread Tension Slot9. Thread Tension Dial10. Bobbin Winding Tension11. Bobbin Winding Spindle12. Release Lever13. Reverse Feed Button14. Screen15. Stitch Width Control16. Needle Position Control17. Stitch Length Control18. Stitch Selection Buttons19. Number Button20. Clear Delete Button21. Foot Control Socket

(Right Side Front)22. Drop Feed Control

(Left Side Front)23. Power Switch

(Right Side Back)24. Power Socket Outlet

(Right Side Back)25. Handwheel (Right Side)26. Spool Pin (Right Side)27. Back Thread Guide

(Back on Tension Slot)28. Presser Foot Lifter (Back

Left Side)29. Feed dogs (under

presser foot)

1

23 4

56

7

8

9

21

22

1211

14

13

15

16

17

23

26

24

27

28

2019

18

10

25

29

1. Shuttle Door/cover plate – Protects the bobbin and bobbin case2. Free Arm3. Needle/stitch Plate – stitching guide/ruler4. Presser Foot – holds the fabric to the machine as you sew5. Needle Clamp Screw – holds the needle tight in the machine6. Thread Guide – directs thread to needle7. Take-up Lever – pulls the thread from the spool and feeds it to the needle8. Thread Tension Slot9. Thread Tension Dial – controls the tension of both upper and lower threads10.Bobbin Winding Tension – controls tension when winding bobbin11.Bobbin Winding Spindle – bobbin is placed here when winding with thread12.Release Lever – turns off bobbin winding mechanism/thread cutter13.Reverse Feed Button – puts your machine in reverse (you can sew “backwards”)14.Screen15.Stitch Width Control – controls the width of your stitch 16.Needle Position Control – controls the position of the needle (you can move it right and left)17.Stitch Length Control – controls the length of your stitch18.Stitch Selection Buttons - 19.Number Button20.Clear Delete Button – erases your stitch selections21.Foot Control Socket (Right Side Front) – where the foot pedal plugs into the machine22.Drop Feed Control (Left Side Front) – lowers the feed dogs into the machine23.Power Switch (Right Side Back) – turns the machine on and off24.Power Socket Outlet (Right Side Back) – where the power cord plugs into the machine25. Handwheel (Right Side) – manually moves the needle up and down26.Spool Pin (Right Side) – holds the spool of thread27.Back Thread Guide (Back on Tension Slot)28.Presser Foot Lifter (Back Left Side) – raises and lowers the presser foot29. Feed Dogs – Help pull fabric through the machine when you sew