B I F O L D D O O R S

2700 frame height x 1000 width per leaf

Engineered Siberian Larch Engineered Red GrandisEngineered European Oak Idigbo

Three coats of Microporous Teknos PaintWide Range of Standard ColoursTranslucent FinishesRAL Code Matching

Toughened safety glass double glazing is standardLow emissivity, tinted, obscure and laminated glass are all available as options at an additional cost.

Frame Depth = 93mmFrame Jamb Width = 69mmDoor Stile Width = 95mm

TFF Slimline 1250, 2500, 5000

Centor Bifold Door Gear is used in conjunction with twin-point locking and shootbolts.

Maximum Size

Species

Colour/Finish

Glazing

Sizes

Trickle Vent

Locking

Triple Leaf Sliding/Folding (bifold) Door set - shown open

01 david salisbury

Bifold Doors Our high quality bespoke timber doors are available in a full range of configurations and finishes.

Bifold (or sliding - folding) doors are increasingly popular, allowing better views and increasing the flexibility for uses of the room. The well-established Centor operating gear enables multiple doors to slide with ease.

Manufactured to the highest level of precision in our state of the art factory, we have years of experience in making door sets up to 8 metres in length and configurations, including complicated bowed track and right angled layouts.

All doors come with secure multi-point locking and fully adjustable hinges as standard, available in a range of finishes.

• Timber from sustainable sources• Factory finished in an automated paint plant, with three coats of microporous paint• Factory glazed with concealed glazing pins• Smooth bottom rolling mechanism• Easily adjustable hinges for fine-tuning

Triple Leaf Sliding/Folding (bifold) Door set - shown closed

david salisbury 02

03 david salisbury

A stunning farmhouse nestled in a Somerset village is complemented by a unique glazed extension including full width, Bifold doors. The design includes a bespoke fascia with a concealed gutter, giving the exterior a contemporary appearance. The use of more glass and less timber gives an unfussy approach to the design and gives the customer a full view of their garden.

CONTEMPORARY BIFOLD DOORSIN SOMERSET

david salisbury 04

05 david salisbury

Multipoint LockingDesigns with master and slave doors can also operate as traditional a French or single door system. Folding

door systems are complemented with Centor locking systems with Twinpoint lock and dropbolts.

Bottom RollingThe weight of the doors is carried by the bottom rolling system, eliminating the need for overhead structur-al beams. The bearings, tapered rollers and angled track are all concealed by a protective gasket which helps prevent debris collecting in the sill track. Cleaning sweepers ensure any grit or dust is cleared away from the rolling mechanism and drainage weep holes allow any water and dust to escape.

SillHousing the bottom rolling gear into our timber sill section gives a sleek design finish whilst maintaining excellent weatherproofing and draught exclusion.

Smooth OperationThe bottom rolling system gives an extremely smooth operation. So much so that stacking the bifold leaves can be done with the push of a finger! Combining such high quality bifolding gear with our premium joinery gives a finished product that is second to none.

Weatherproofing GasketAs well as the weather tested Centor track, all door leafs are fitted with a double gasket system giving excellent weather proofing and insulation.

Incorporating the Centor F3 system into our premium quality joinery, our smooth

operating Bifold system is tried and tested on hundreds of installations. Precision

joinery ensures that when correctly installed, only simple balancing adjustments

should be required on site.

david salisbury 06

Below are standard CAD section details for our

Sliding/Folding Doors. CAD drawings can be

produced on request in order to support you when

specifying our products.

07 david salisbury

TimberDavid Salisbury has carefully selected the best timber for each application within our product range. Ourframes, sashes and roof timbers are manufactured from Engineered Siberian Larch where a solid colour finish is required unless otherwise specified. Engineered Red Grandis and Idigbo are utilised in decorative fascia and pilaster applications. Where a translucent finish is required, we will manufacture from Idigbo only. Where requested, we are also able to offer FSC® certified products sourced from responsibly managed forest. Glazing bead and bonded bar sets are manufactured from Qwood where the product is non-translucentand does not have any curved beading or bars. Qwood is a composite derived from timber sourced insustainably managed forests. For any product requiring a translucent finish or curved beading or bars, Idigbo will be used. Selected timber sections are used for a combination of strength, durability, machining flexibility and an ability to accept a wide range of finishes. These timbers are naturally resistant to wood rot and fungal attack and the natural oils present in the timber make it resistant to moisture penetration.

*We reserve the right to use alternative timbers without notice depending on design, supply and market conditions.**Any translucent finish will be manufactured from the same timber throughout.

SPECIES HARDNESS (JANKA TEST) DENSITY RUPTURE SHRINKAGE

Siberian Larch 1100 lbf 575 kg/m³ 15,050 lbf/in² Radial: 3.9%, Tangential: 6.8%, Volumetric: 10.5%

Idigbo 850 lbf 530 kg/m³ 12,000 lbf/in² Radial: 3.5%, Tangential: 5.2%, Volumetric: 9.0%

Eucalyptus Grandis 1060 lbf 560 kg/m³ 15,640 lbf/in² Radial: 5.9%, Tangential: 10.1%, Volumetric: 15.5%

Oak 1120 lbf 675 kg/m³ 14,100 lbf/in² Radial: 4.7%, Tangential: 8.4%, Volumetric: 13.0%

david salisbury 08

Factory GlazingAll windows & doors are glazed in our workshop by our highly skilled team of glaziers. The external beading profile is designed to replicate the look of a traditional putty fillet. We use a concealed pin system to avoid any surface pinning filling which gives the best possible finish.

GlassWe offer a full range of glass units including slight-lite units, internal blinds, triple glazing and switchable glass. We can supply various other options to im-prove U-values, reduce heat gain or to ensure greater security. Etched or patterned glazing can also be supplied.

• 24mm double glazed sealed units manufactured to a 4-16-4 configuration. Conforms to BS5713*• Toughened safety glass as standard• Factory glazed using a fully sealed system• Low emissivity, solar control, tinted, easy-clean, obscure and laminated glass are all available as options at an extra cost* A summary of the relevant British Standard can be found on www.bsonline.techindex.co.uk

FenestrationA choice of 18mm bonded bars or 44mm (34mm or 24mm with slim-light glazing) through bars allow a full range of fenestration options, from Georgian multi-pane units to semi-circular or Gothic beading configurations. Our highly skilled craftsman and precision engineering allow us to create very complex fenestration designs to an extremely high standard.

Bonded (Applied) Bars Through Bars

09 david salisbury

Hardware for Sliding/Folding DoorsAll ironmongery available is available in a range of finishes.

INCLUDED AS STANDARD:Tokyo Range Door Handles Bifold Door Flush Handles

Optional Extras Prices vary, please contact us for further information

Brass Bronze Stainless SteelPolished Chrome

Polished Chrome Polished Chrome

Gold

Gold Gold

Black

Black Black

Satin Chrome White

PendantScroll Forgecraft

david salisbury 10

PaintTimber is treated with three coats of factory applied micro-porous paint or translucent stain providing a fully finished product. Our fully automated finish-ing plant provides a high build, uniform paint finish. All paint, translucent, primers and finishes are micro-porus, allowing the timber to breathe naturally.

A choice of standard paint colours are available, along with six naturally translucent finishes. Special colours can also be produced to match any sample or RAL reference number. We can also provide a combination of two-tone internal/external*.

COLOUR CHART TO BE USED AS A GUIDE ONLY* Two-tone finish cannot be applied to any stain

FLAGSTONE

HARVEST YELLOW

LICHEN

GREEN SLATE

EAGLE SIGHT

INNER SELF RAW HESSIAN

PEBBLE WHITE

PHAROAH

SAGE GREEN

QUANTOCK’S QUEST

PAVILIONLIMESTONE

MENDIP GREY

MUSHROOM

OLD BOAT

NOAH’S WHITE

MUD FLATS

BARLEY WHITE

BATH STONE

BIRCH

CORN WHITE

ANCHOVY

BRENDON’S BLUE

SHAKER CREAM

STONE

SLIPPER WHITE

SAND

SHOWER BLUE

SATIN GREEN

THATCH

SOMERSET CREAM

WHITE

SMUDGE

WATER LILY

SOUFFLÉ

L A N T E R NR O O F S

C A S E M E N TW I N D O W S

S A S HW I N D O W S

C O N S E R V A T O R I E S& O R A N G E R I E S

S L I D I N G / F O L D I N G( B I F O L D ) D O O R S

D O O R S

David Salisbury Joinery Ltd, Bennett Road, Highbridge, Somerset, TA9 4PW

Telephone: 01278 764446 | E-mail: commercial@davidsalisbury.com

www.davidsalisburycommercial.co.uk