BIM SERVICES OFFERED BY SABS BIM Collaboration and documentation setup. The process of BIM Plan preparation, is very important especially when collaboration is intended between various consultants. In case of large scale projects, BIM model management and linking is crucial to the success of the project.BIM Model Development at varying LODs Architectural Modeling (LOD-100 to LOD 500) Structural and Steel Modeling (LOD-100 to LOD 500) MEPFF (Mechanical, Electrical, Plumbing and Fire Fighting Modeling (LOD-100 to LOD 500) External Works Modeling Landscape Modeling (LOD-100 to LOD 500)Site Gradings and Cut & Fill Calculations. This is very critical for large contoured sites where accurate estimation of soil cut and fill is required.Energy Analytical Models (Concept and Detailed) The Revit model can be imported into Ecotect to conduct detailed Energy analysis.Building Simulations Walkthrough Generations can be done to study aesthetics, solar path, day-lighting conditions etc.Interference ChecksClash Detection between various MEP disciplines with Architectural and structural model and resolution of the interference points.4D sequencing with time schedule The BIM model can be further promoted for 4D sequencing to facilitate project and construction management.BOQ Generation and Validation Very accurate estimation of the quantities modeled can be derivedDesign and Construction Documentation Good for Construction Documentation can be generated from the BIM Model without resorting to 2D drafting. The BIM model can be further detailed to generate Shop drawings from the same.Families and Content Creation Operations and management support Facility Management Support.