Biomass pellets burner

Dedicated to providing you with best pelletizing solution

Biomass Pellets Burner

Contact person: Julia Liu

Email: [email protected] More information about pellet mills please visit http://goo.gl/p0xYkw

Biomass Pellets Burner Biomass burner, biomass pellet burner, biomass burning machine

Biomass Pellets Burner This series of biomass burners are newly biomass combustion devices, which adopt new scientific research, integrate advanced combustion technologies. They are the best substitutes of combustion equipments for electric boilers, oil burning boilers, gas-fired boilers and coal-fired boilers.

Biomass Burner Applied Range Biomass burner is widely used in various heat energy industries, such as boiler, die-casting machine, industrial furnace, incinerator, smelting furnace, drying equipment, drying plant, painting equipment and asphalt heating equipment etc.



Biomass Burner Features and Advantages

●Energy-efficient: it uses the renewable biomass energy as fuel with low cost ●High thermal efficiency: with boiling type half gasification combustion and tangent spiral-flow type air distribution design, the fuel can burn completely, and the combustion ratio can reach higher than 90% ●Stable and reliable performance: the equipment is running under micro-pressure state, it won't appear tempering or flame-lifting phenomenon ●Low carbon and pro-environment: it realizes the sustainable use of energy by using the biomass energy, with low emissions of smoke dust, sulfur, nitrogen and carbon dioxide ●Easy operation: adopt automatic feeding system, easy to operate ●Low investment and running cost: the biomass burner is with reasonable design, it costs little money when used for boiler reforming.



Biomass Burner Structure

The biomass burner consists of feed mechanism, adjustable fire bed, high temperature splitting chamber, oxygen system and high temperature flue gas output system.

Biomass Burner Working Principle

1. Biomass fuel enters into the high temperature splitting chamber through the automatic feeding system. Abundant volatiles separate out of the biomass pellets and burning in the air;

2. Fine particles float in the air and burning instantly under the impact of wind; The larger particles are falling on the hot hire bed, which forms solid combustion;

3. The fuel at last burns completely with the help of oxygen system; After complete combustion, the high temperature smoke injects into boiler burning chamber. It is absorbed when passing the boiler heating surface; and the clean smoke is discharging into the air after processing by the dust removing plant.

Attention 1) The fuel should be pure sawdust biomass pellets, don't use clastic particles or pellets with impurities; 2) It's better to close the duel box cover to prevent waste; 3) When appear biomass fuel block, just use the crabstick to stab, don't use iron wire; 4) After working a period of time, there will appear coking near the fire-spraying mouth. It will affect the running of burner and even damage the burner. So it is necessary to do periodic inspection and decoking. Biomass Burner Technical Parameters



Model Heat

Efficiency Voltage

Fuel

Consumption

Blower

Power

Corresponding

Boiler

BN-20-

BF5.0 92%—95% 220V 55kg/h 1.1kw 0.3ton

BN-30-

BF5.0 92%—95% 220V 78kg/h 1.1kw 0.5ton

BN-45-

BF5.0 92%—95% 220V 120kg/h 1.5kw 0.75ton

BN-60-

BF5.0 92%—95% 380V 142kg/h 2.2kw 1ton

BN-90-

BF5.0 92%—95% 380V 215kg/h 3kw 1.5ton

BN-120-

BF5.0 92%—95% 380V 300kg/h 3kw 2ton

BN-180-

BF5.0 92%—95% 380V 470kg/h 5.5kw 3ton

BN-240-

BF5.0 92%—95% 380V 600kg/h 5.5kw 4ton

Documents

Biomass pellets burner