ORBITbionica.bio/doc/Catalogo BIONICA.pdf · 2021. 2. 15. · 6 Length Art.-No. 4 mm OT6004 6 mm OT6006 8 mm OT6008 10 mm OT6010 11.5 mm OT6011 13 mm OT6013 Length Art.-No. 8 mm OT2408

1

Easy system concept ®ORBITAmazing implant system with positionable abutment from 0° to 30 ° on 360° of revolution

INTERNATIONAL PATENT WIPO|PCT

2

®ORBIT BIONICA® implant system is designed to facilitate daily work.A design that provides confidence and immediacy, it can be used in all types of bone thanks to the modulation of the milling protocols. It guarantees primary stability in all situations and immediate loading is possible.Easier prosthetic: LEM Abutment positionable from 0° to 30° on 360° of revolution.The LEM can be paralyzed directly in the oral cavity.Single connection for all diameters and easy management.On top of the LEM can have a conometric or screw-retained prostheses.More biology: Transgingival implant with a convergent shaped neck that creates more space to allow biological amplitude and hard-soft tissue stability. More mechanical resistance:Not having the implant cavity increases mechanical resistance to an unprecedented level.

THE POWER OF CHANGEAn extreme implant system with new technology is born:-Easier prosthetics-More biological-More mechanical resistanceAn implant system dedicated to all professionalswho want to stretch the limits of possibility

3

Packaging

Container completely manufactured in titanium to avoid contamination of the im-plant with other materials.The container and it’s lid are completely recyclable and protected by a hermetically sealed blister in the box.The screw-top lid is part of the and can be removed with the purpose screwdriver which separates it with a slight rotatory movement.

Why is it more resistant ?

In the picture you see the structural difference between ORBIT Ø 2.7 mm diameter on the left and a common dental implant Ø 2.7 mm with an internal connection to the right. ORBIT has a solid implant body while other implants by necessity have a cavity to house the various abutments which weakens the sides.As a result of this connection system the Orbit range starts with a diameter of 2.4mm with a superior mechanical resistance to the current biphasic implant systems. Orbit Ø 2.7 Standard Implant Ø 2.7

4

TiDAE SurfaceThe superficial treatment used for the endo-osseous part of the implant is based on Double Acid Etching. The final clean with glow discharge plasma leaves the surface homogenous and without residue.

TiDAE Surface treatment

Static and dynamic loading tests in according to ISO 14801

ORBIT passed the static mechanical strength test with an average load of 1322 N.

ORBIT passed the fatigue strength test with a 400 N for 5.000.000 cycles.

Superficial topographyThis technique allows the ability to get a topography of the external layers to a depth of about 8 nanometres (nm) for optimal os-seo-integration.

Characteristics of the anodised coronal portionThe coronal part of the ORBIT implant undergoes a process of anodization to give it a gold colour which is aestehically advantageous. This layer, naturally present on each titanium component, when exposed to the atmosphere is created by oxygen on the titanium. It usually measured about 3-4 nm and is transparent. The growth of this layer until a thickness comparable to the wavelength of light causes optical phenomena. Depending on the thickness of this layer, the optical effect creates defined colours without needing addi-tional materials or coverings.

5

Diameter Apex Core Sphere Length

Ø 2,4 Ø 2,0 Ø 1,4 Ø 4 mm 8 mm 10 mm 11,5 mm 13 mm 15

Ø 2,7 Ø 2,0 Ø 1,,4 Ø 4 mm 8 mm 10 mm 11,5 mm 13 mm 15

Ø 3,2 Ø 2,72 Ø 1,6 Ø 4 mm 8 mm 10 mm 11,5 mm 13 mm 15

Ø 3,7 Ø 2,8 Ø 1,6 Ø 4 mm 4 mm 6 mm 8 mm 10 mm 11,5 mm 13 mm 15



Ø 6,0 Ø 4,8 Ø 3,2 Ø 4 mm 4 mm 6 mm 8 mm 10 mm 11,5 mm 13

Sphere

Core

Lenght

Apex

0.85Diameter

Orbit diameters and lengths

The special spherical connection that creates a 1.0 mm mucosal passage must be taken into con-sideration for the conditioning of soft tissues and the choice of the LEM abutment.

Soft tissue management

1.02.5 LEM1

4.0 LEM31.0

1.0 LEM0

2.3

Note:All ORBIT fixture should be inserted with max 65 Ncm torque.

6

Length Art.-No.4 mm OT6004

6 mm OT6006

8 mm OT6008

10 mm OT6010

11.5 mm OT6011

13 mm OT6013


10 mm OT2410

11.5 mm OT2411

13 mm OT2413

15 mm OT2415

Product Platform Image MaterialORBIT dental implantØ 2.7 mm

Sphere Ø 4 mm Ti gr. 4


10 mm OT3210

11.5 mm OT3211

13 mm OT3213

15 mm OT3215




6 mm OT3706

8 mm OT3708

10 mm OT3710

11.5 mm OT3711

13 mm OT3713

15 mm OT3715

Product Platform Image Material

ORBIT dental implantØ 3.7 mm



6 mm OT4306

8 mm OT4308

10 mm OT4310

11.5 mm OT4311

13 mm OT4313

15 mm OT4315










6 mm OT5006

8 mm OT5008

10 mm OT5010

11.5 mm OT5011

13 mm OT5013

15 mm OT5015




10 mm OT2710

11.5 mm OT2711

13 mm OT2713

15 mm OT2715

®ORBIT

7

Drilling sequence

Until fixture length Optional Drill Until second mark

AttentionWhen placing a ORBIT fixture in soft bone (D IV) the surgeon should consider undersizing osteotomy.The final drill diameter should be limited to the one immediately smaller than the diameter that should have been used.When placing an ORBIT fixture in hard bone (D I) do not underpre-pare the osteotomy site.The surgeon should consider to use as final drill diameter the one immediately bigger than the diameter that should have been used, stopping at the second laser mark. This will create an osteotomy of proper dimension in the dense cortical bone without any under-preparation.

Ø6.0Only Soft Bone

Soft Bone

Dense BoneØ5.0

Soft Bone

Dense BoneØ2.7

Soft Bone

Dense BoneØ3.2

Soft Bone

Dense BoneØ3.7

Soft Bone

Dense BoneØ4.3

Soft Bone

Dense BoneØ2.4

Ø2.0 Ø2.4 Ø2.8 Ø3.2 Ø3.8 Ø4.5 Ø5.5Ø1.5

Ø2.1 Ø2.1 Ø2.7 Ø3.2 Ø3.7

4 mm

6 mm

8 mm

10 mm11.5 mm13 mm

15 mm

18 mm

0 mm

Sleeve Stop

Sleeve stopdrill

Bone millto prepare the bone in cases where it is necessary to sink the spherical part of the fixture.

0 mm2 mm

3 mm4 mm

Ø0.0 Ø1.5 Ø2.0

8

ORBIT ZYGO

Length Art.-No.26 mm OZ3526

28 mm OZ3528

30 mm OZ3530

35 mm OZ3535

37.5 mm OZ3537

40 mm OZ3540

42.5 mm OZ3542

45 mm OZ3545

47.5 mm OZ3547

50 mm OZ3550

52.5 mm OZ3552

55 mm OZ3555

57.5 mm OZ3557

Product Platform Image MaterialORBIT ZYGO Ø 3.5 mmZygomatic ImplantApical portion threaded with 0.6mm pitch

15mm long and 10mm tidae surface treatment


NASAL - PTERYGOIDLength Art.-No.

18 mm OT3218

20 mm OT3220

22 mm OT3222

24 mm OT3224

26 mm OT3226




20 mm OT3720

22 mm OT3722

24 mm OT3724

26 mm OT3726




Zygomatic implants Ø3.5 mm LEM Abutment positionable from 20° to 70°The LEM can be paralyzed directly in the oral cavity.

Product Image Description Material Art.-No.

LONG STRAIGHT DRILL Ø 2.0 Nasal Pterygoid straight drill Ø 2.0 AISI630 FDN20

LONG STRAIGHT DRILL Ø 2.4 Nasal Pterygoid straight drill Ø 2.4 AISI630 FDN24

®ORBIT

9

Note:All LEM abutments should be inserted with 45Ncm torque for bridges and extended work. 65Ncm for single implants.

The special feature of the spherical connection that creates a 1.0 mm mucous passage must be taken into consideration for the modeling of soft tissues and the choice of the LEM abutment.

Soft tissue management

1.02.5 mm

LEM1

4.0 mm

LEM3

1.01.0 mm

LEM0

Product Front Persp. Description Material Art.-No.LEM-ABUTMENT 1.0with PROBE-SCREW

Abutment for conometric and screw prostetic Ø 4.13 mm h 4.6 mm gingiva height 1.0 mm with Probe-screw

Ti gr. 5 LEM0

LEM-ABUTMENT 2.5 with PROBE-SCREW


Ti gr. 5 LEM1

LEM-ABUTMENT 4.0 with PROBE-SCREW


Ti gr. 5 LEM3

PROBE-SCREW M2 Abutment screw for LEM Ti gr. 5 PRO

M2.0

4,9°

10

Product Front Persp. Description Material Art.-No.IMPRESSION COPING CLOSE TRAY LEM transfert closed tray Ti gr. 5 TCC

IMPRESSION COPING OPEN TRAY LEM transfert open tray with screw Ti gr. 5 TCA

Product Front Persp. Description Material Art.-No.

SCAN BODY LEM Digital abutment sandblasted for LEM Ti gr. 5 MSD

Product Front Persp. Description Material Art.-No.HEALING COVER LEM H0.0 Cover screw for Orbit in PEEK Peek HC0

HEALING COVER LEM H5.4 Cover LEM ⌀ Ø 5.2 mm, gingiva height 5.4 mm

Ti gr. 5 HC1

HEALING COVER LEM H6.7 Cover LEM ⌀ Ø 5.2 mm, gingiva height 6.7 mm

Ti gr. 5 HC3

HEALING COVER LEM LARGE H5.4 Cover LEM ⌀ large Ø 5.6 mm, gingiva height 5.4 mm

Ti gr. 5 HCS1

HEALING COVER LEM LARGE H6.7 Cover LEM ⌀ large Ø 5.6 mm, gingiva height 6.7 mm

Ti gr. 5 HCS3

COVER SCREW Cover screw for ORBIT Ti gr. 5 VT

Impression Coping

Product Front Persp. Description Material Art.-No.

ORBIT REPLICA ORBIT replica analogic/digital Ti gr. 5 ANO

LEM REPLICA LEM replica analogic/digital Ti gr. 5 ANL

LEM REPLICA CEMENTED LEM replica cemented analogic/digital Ti gr. 5 ANC

Digital Impression

Analogs

Healing Cover

11

Product Front Persp. Description Material Art.-No.CONOMETRIC LEM-CAP ENGAGING Not rotational LEM-cap for conometric

retained crownsTi gr. 5 CLCAE

CONOMETRIC LEM-CAP NOT ENGAGING

Rotational LEM-cap for conometric retained bridges

Ti gr. 5 CLCRE

CONOMETRIC RESIN LEM-CAP NOT ENGAGING

Rotational resin LEM-cap for conometric retained bridges

Ti gr. 5 CLCRRE

Conical-retained Restoration

Screw-retained RestorationProduct Front Persp. Description Material Art.-No.SCREW LEM-CAP ENGAGING

Not rotational LEM-cap for screw retained crowns with VCA screw

Ti gr. 5 CLAA

SCREW LEM-CAP NOT ENGAGING

Rotational LEM-cap for bridgesretained screw with VCA screw

Ti gr. 5 CLAR

Using the appropriate cap, both conometric and screw prosthetic can be added to the LEM.For both these options there are rotational non-rotational caps.The prosthetic screws should be inserted using 25/30Ncm.The medical grade 5 titanium caps are covered in titanium nitride to increase their resistance to wear and tear.Aesthetics is improved by the gold colour which hides the metal under the soft tissue.

NoteThe prosthetic screws should be inserted using 30Ncm

Cemented RestorationProduct Front Persp. Description Material Art.-No.CEMENTED LEM-CAP ENGAGING

Not rotational LEM-cap for cemented retained crowns with VCA screw

Ti gr. 5 LC1

CEMENTED LEM-CAP NOT ENGAGING

Rotational LEM-cap for cemented retained crowns with VCA screw

Ti gr. 5 LC0

Product Front Persp. Description Material Art.-No.RETAINED SCREW Retained screw Ti gr. 5 VCA

Screw-retained

Conical and screw retained CAP

12

INTRAORAL WELDING

Product Image Description Material Art.-No.WINGS® LEM-CAP H1.0 0° rotational WINGS® LEM-cap for

conometric retained bridges.H1.0 0°

Ti gr. 5 WINGS-10-00

WINGS® LEM-CAP H1.9 0° rotational WINGS® LEM-cap for conometric retained bridges.H1.9 0°










ROUND BAR Ø 1.5 mm Round bar Ø 1.5 mm L 140 mmpack of 5 pieces

Ti gr. 5 ROUND-BAR-15-140





REINFORCEMENT BAR Reinforcement bar 4x1.5x120 mm pack of 5 pieces

Ti gr. 4 REINF-BAR-4-15-140

CASTLE BAR Reinforcement bar 3x5.2x51 mm pack of 5 pieces

Ti gr. 5 CASTLE-BAR-3-5-51

MEDICAL PLIER Medical cutting and bending plier Surgical steel

PLIER

Product Front Persp. Description Material Art.-No.CONOMETRIC WELDING LEM-CAP NOT ENGAGING

Rotational welding LEM-cap for conometric retained bridges

Ti gr. 5 CLCRW

13

Product Image Description Art.-No.INTRAORAL WELDING MACHINE BIONICA INTRAORAL WELDING MACHINE

Power supply 115-230V ACNetwork frequency 50-60 HzAverage power absorbed by the network 10 WPeak power absorbed during the welding phase: 1 KWMedical class 2 BInsulation class I - Type BF applied partProtection against anesthetics Device not suitable for use in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.IP degree of protection IPXOMethods of commitment Continuous operationOperating conditions Temp./HR/Press. 10oC - 35oC 30% - 90% 700 - 1100 hPa Storage conditions Temp./RH/Press. 5oC - 50oC 30% - 90% 700 - 1100 hPa External connections PedalDimensions 30x22x17 cm (Length x Width x Height)

BIOWELD

CYLINDRICAL ELECTRODES Cylindrical replacement electrodes CYL-EL

CONICAL ELECTRODES Conical replacement electrodes CON-EL

14

Laboratory component

Product Front Persp. Description Material Art.-No.REPOSITION LEM-CAP LEM-CAP for reposition Ti gr. 5 LCPZ

LABORATORY CONOMETRIC LEM-CAP ENGAGING

Not rotational laboratory LEM-cap for crowns conometric retained

Ti gr. 5 CLCLAE

LABORATORY CONOMETRIC LEM-CAP NOT ENGAGING

Rotational laboratory LEM-cap for bridges conometric retained

Ti gr. 5 CLCLRE

LABORATORY PROSTHETIC SCREW CAP

Laboratory M2.0 screw-retainedHEX 1.2

Ti gr. 5 VCAL

Product Image Description Material Art.-No.OVER-LEM 3.6 Abutment for overdenture restoration h 3.6 Ti gr. 5 030ORB36

OVER-LEM 5.0 Abutment for overdenture restoration h 5.0 Ti gr. 5 030ORB5

CAP ATTACHEMENT KIT Cap attachement housing and elastic reten-tive caps

Steel 192ECE

CAP ATTACHEMENT Cap attachement housing Steel 141CAE

ELASTIC RETENTIVE CAP Yellow retentive cap - Retention 0,6 kg Plastic 140CEG

ELASTIC RETENTIVE CAP Pink retentive cap - Retention 1.2 kg Plastic 140CER

ELASTIC RETENTIVE CAP White retentive cap - Retention 1.8 kg Plastic 140CET

ELASTIC RETENTIVE CAP Purple retentive cap - Retention 2.7 kg Plastic 140CEV

ELASTIC RETENTIVE CAP Black retentive LABORATORY cap Plastic 140CEN

RETENTIVE HOLDER White retentive older for driver Plastic 774HC

IMPRESSION COPING OVER-LEM transfert Steel 044CAIN

OVER-LEM REPLICA OVER-LEM analog Steel 144AE

INSERTION/EXTRACTOR TOOL Insertion and extractor tool for elasticretentive cap

Plasticsteel

485IC

Overdenture Restoration

NoteThe OVER-LEM should be locked at torque MAX 50 Ncm

15

SURGICAL AND PROSTHETIC INSTRUMENTS

All the surgical instruments were created by BIONICA with the highest quality materials for increased durability.A specific instrument has been designed to facilitate the parallelization of LEM abutment prosthetic emergence.

IMPLANT SURGICAL BOX KITAutoclavable box made entirely from materials suitable for steam sterilisation, with silicon support and printed drill sequence surgical protocol.The box is certified in accordance with ISO 9001:2008 for the design and production of injection moulded plastic containers for the industrial and medical sectors.And it complies with UNI CEI EN ISO 13485:2016 “For the design and production of plastic autoclav-able containers for use in the medical sector”.

16

Product Image Description Material Art.-No.SURGICAL BOX Surgical box without instruments Plastic and

siliconeBKO

SURGICAL BOX WITH SURGICAL INSTRUMENTS

Surgical box with instrumentsDrill, Stop drill sleeves, Bone mill, Extension, Implant driver small and long, Screw driver small and long, Torque wrench, Lem parallelize.

Plastic silicone and surgical steel

KCCO

GUIDED SURGICAL BOX Guided surgical box without instruments

Plastic and silicone

BKGO

GUIDED SURGICAL BOX WITH SURGICAL INSTRUMENTS

Guided surgical box with instru-mentsDrill, Stop drill, Pin, Tissue punch, Bone mill, Guided implant driver, Torque wrench, Lem parallelize.


KCCGO


LANCEOLATE MILLING CUTTER Lanceolate milling cutter Ø 1.5 AISI630 FL15

STRAIGHT DRILL Ø 2.0 Straight drill Ø 2.0 AISI630 FD20

STRAIGHT DRILL Ø 2.4 Straight drill Ø 2.4 AISI630 FD24

CONICAL DRILL Ø 2.8 Conical drill Ø 2.8 apex Ø 2.1 AISI630 FC285





Product Front Persp. Description Material Art.-No.SURGICAL GUIDE PEEK SLEEVE Surgical guide sleeve in peek int. Ø 5.0 Peek BPAP

SURGICAL GUIDE SLEEVE Surgical guide sleeve in steel int. Ø 5.0 Steel BPA

SURGICAL GUIDE PIN Surgical guide pin Ø 1.5 mm L 16 mm Steel PFD

SURGICAL GUIDE PIN SLEEVE Surgical guide pin sleeve in steel int. Ø 1.5

Steel BAP

17


H 4.0 DRILL STOP Stop sleeve h 4.0 mm for section drill max Ø 3.2

AISI630 BCC400


AISI630 BCC600


AISI630 BCC800


AISI630 BCC100


AISI630 BCC115


AISI630 BCC130


H 4.0 DRILL STOP LARGE Stop sleeve h 4.0 mm large for section drill max Ø 4.5

AISI630 BCC400L


AISI630 BCC600L


AISI630 BCC800L


AISI630 BCC100L


AISI630 BCC115L


AISI630 BCC130L


BONE MILL Ø 4.0 Bone mill Ø 4.0 AISI630 PDS40

CORE DRILL Ø 6.0 Bone core mill Ø 6.0 with guide pin

AISI630 4FRO

EXTENSION INSTRUMENT Extension instrument AISI630 PRFR

IMPLANT REMOVAL TOOL Orbit Ø 4.0 implant removal tool Steel CRI

Parallelizer LEM

18


PARALLELIZER LEM Parallelizer for LEM abutment.This specific instrument has been designed to facilitate the paralleli-zation of LEM abutment prosthet-ic emergence.

SurgicalSteel

PAR

FULL ARC GUIDE Full arc guide for drill angle control SurgicalSteel

GPA

DIRECTION INDICATOR PIN Direction indicator pin Ø 2.0 mm 30° angled

SurgicalSteel

IDD20

TORQUE WRENCH Torque wrench with Ø 7.0 mm head

SurgicalSteel-Peek

DNM


MANUAL LEM DRIVER Manual driver for abutment LEM SurgicalSteel

ILEM

LEM DRIVER Contrangle LEM driver SurgicalSteel

4ICLEM

IMPLANT DRIVER S Implant driver contrangle small SurgicalSteel

4ICIC

IMPLANT DRIVER L Implant driver contrangle long SurgicalSteel

4ICIL

IMPLANT DRIVER GUIDED Implant driver contrangle guided SurgicalSteel

4ICIG


SCREWDRIVER 1.2 SMALL Prostetic screw-driver 1.2 small SurgicalSteel

CMC

SCREWDRIVER 1.2 LONG Prostetic screw-driver 1.2 long SurgicalSteel

CML

SCREWDRIVER 1.2 MACHINE SMALL

Prostetic screw-driver 1.2 machine small

SurgicalSteel

4CCC

SCREWDRIVER 1.2 MACHINE LONG

Prostetic screw-driver 1.2 machine long

SurgicalSteel

4CCL

EXTRACTOR CAP Extractor for conometrical LEM cup

SurgicalSteel

EC3

OVER-LEM SCREWDRIVERMACHINE

Prostetic screw-driver machine for OVER-LEM

SurgicalSteel

4ICLEMB

IMPLANT CAVITY CLEANER Implant cavity cleaner SurgicalSteel

PLC

19


ZYGOMATIC SURGICAL KITWITH INSTRUMENTS

Zygomatic surgical kitbox with instrument:s: Drill, driver, Depth probe measure, Depth straight probe measure, Round bone mill, Track drill, Screw driver small and long, Surgical driver.


KCCOZ

ORBIT ZYGO DRIVER Orbit Zygo Driver with lock AISI630 4ICIM

ROUND BUR Round bur Ø 2.8 AISI630 FRZ2867

STRAIGHT DRILL Ø 2.8 Zygomatic straight drill Ø 2.8 AISI630 FDZ2867

LONG STRAIGHT DRILL Ø 2.8 Zygomatic long straight drill Ø 2.8 AISI630 FDZL2895

STRAIGHT DRILL Ø 3.2 Zygomatic straight drill Ø 3.2 AISI630 FDZ3267

LONG STRAIGHT DRILL Ø 3.2 Zygomatic long straight drill Ø 3.2 AISI630 FDZL3295

STRAIGHT BONE DRILL Ø 3.5 Straight bone drill Ø 3.5 AISI630 FDZ3552

DEPTH PROBE Depth probe AISI630 MPAZ

STRAIGHT DEPTH PROBE Straight depth probe AISI630 MPDZ

SURGICAL DRIVER Surgical handle driver AISI630 MCI

SURGICAL KIT

Contrangle ORBIT ZYGO driverIt can also be used with the surgical handle driver MCI

ORBIT ZYGO

20

®

www.bionica.bio

MADE IN ITALY 0425

BIONICA SRLViale Bassani, 87i36016, Thiene, VIItaly0039 0445 366337

Mod

.OB

00

2 R

ev. 1

del

22/

07/

2021

®

OR

BIT

[email protected]

Documents

ORBITbionica.bio/doc/Catalogo BIONICA.pdf · 2021. 2. 15. · 6 Length Art.-No. 4 mm OT6004 6 mm OT6006 8 mm OT6008 10 mm OT6010 11.5 mm OT6011 13 mm OT6013 Length Art.-No. 8 mm OT2408